leds: move LED trigger drivers into new subdirectory

For better driver management, new subdirectory, 'trigger' is created.
All LED trigger drivers are moved into this directory.

Internal header, 'leds.h' is included in each LED trigger drivers.
Fix the location of header file, "leds.h" -> "../leds.h" in driver files.
One exception is here, 'ledtrig-timer.c'.
There is no need to include 'leds.h'. so '#include "leds.h"' line was removed.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>

13 files changed, 121 insertions, 117 deletions

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index c7f755034375..d44806d41b44 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -479,106 +479,7 @@ config LEDS_BLINKM
 	  This option enables support for the BlinkM RGB LED connected
 	  through I2C. Say Y to enable support for the BlinkM LED.
 
-config LEDS_TRIGGERS
-	bool "LED Trigger support"
-	depends on LEDS_CLASS
-	help
-	  This option enables trigger support for the leds class.
-	  These triggers allow kernel events to drive the LEDs and can
-	  be configured via sysfs. If unsure, say Y.
-
 comment "LED Triggers"
-
-config LEDS_TRIGGER_TIMER
-	tristate "LED Timer Trigger"
-	depends on LEDS_TRIGGERS
-	help
-	  This allows LEDs to be controlled by a programmable timer
-	  via sysfs. Some LED hardware can be programmed to start
-	  blinking the LED without any further software interaction.
-	  For more details read Documentation/leds/leds-class.txt.
-
-	  If unsure, say Y.
-
-config LEDS_TRIGGER_ONESHOT
-	tristate "LED One-shot Trigger"
-	depends on LEDS_TRIGGERS
-	help
-	  This allows LEDs to blink in one-shot pulses with parameters
-	  controlled via sysfs.  It's useful to notify the user on
-	  sporadic events, when there are no clear begin and end trap points,
-	  or on dense events, where this blinks the LED at constant rate if
-	  rearmed continuously.
-
-	  It also shows how to use the led_blink_set_oneshot() function.
-
-	  If unsure, say Y.
-
-config LEDS_TRIGGER_IDE_DISK
-	bool "LED IDE Disk Trigger"
-	depends on IDE_GD_ATA
-	depends on LEDS_TRIGGERS
-	help
-	  This allows LEDs to be controlled by IDE disk activity.
-	  If unsure, say Y.
-
-config LEDS_TRIGGER_HEARTBEAT
-	tristate "LED Heartbeat Trigger"
-	depends on LEDS_TRIGGERS
-	help
-	  This allows LEDs to be controlled by a CPU load average.
-	  The flash frequency is a hyperbolic function of the 1-minute
-	  load average.
-	  If unsure, say Y.
-
-config LEDS_TRIGGER_BACKLIGHT
-	tristate "LED backlight Trigger"
-	depends on LEDS_TRIGGERS
-	help
-	  This allows LEDs to be controlled as a backlight device: they
-	  turn off and on when the display is blanked and unblanked.
-
-	  If unsure, say N.
-
-config LEDS_TRIGGER_CPU
-	bool "LED CPU Trigger"
-	depends on LEDS_TRIGGERS
-	help
-	  This allows LEDs to be controlled by active CPUs. This shows
-	  the active CPUs across an array of LEDs so you can see which
-	  CPUs are active on the system at any given moment.
-
-	  If unsure, say N.
-
-config LEDS_TRIGGER_GPIO
-	tristate "LED GPIO Trigger"
-	depends on LEDS_TRIGGERS
-	depends on GPIOLIB
-	help
-	  This allows LEDs to be controlled by gpio events. It's good
-	  when using gpios as switches and triggering the needed LEDs
-	  from there. One use case is n810's keypad LEDs that could
-	  be triggered by this trigger when user slides up to show
-	  keypad.
-
-	  If unsure, say N.
-
-config LEDS_TRIGGER_DEFAULT_ON
-	tristate "LED Default ON Trigger"
-	depends on LEDS_TRIGGERS
-	help
-	  This allows LEDs to be initialised in the ON state.
-	  If unsure, say Y.
-
-comment "iptables trigger is under Netfilter config (LED target)"
-	depends on LEDS_TRIGGERS
-
-config LEDS_TRIGGER_TRANSIENT
-	tristate "LED Transient Trigger"
-	depends on LEDS_TRIGGERS
-	help
-	  This allows one time activation of a transient state on
-	  GPIO/PWM based hardware.
-	  If unsure, say Y.
+source "drivers/leds/trigger/Kconfig"
 
 endif # NEW_LEDS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index ab8f5c549ad3..ac2897732b02 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -58,12 +58,4 @@ obj-$(CONFIG_LEDS_BLINKM)		+= leds-blinkm.o
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
 
 # LED Triggers
-obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
-obj-$(CONFIG_LEDS_TRIGGER_ONESHOT)	+= ledtrig-oneshot.o
-obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK)	+= ledtrig-ide-disk.o
-obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+= ledtrig-heartbeat.o
-obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT)	+= ledtrig-backlight.o
-obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledtrig-gpio.o
-obj-$(CONFIG_LEDS_TRIGGER_CPU)		+= ledtrig-cpu.o
-obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
-obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT)	+= ledtrig-transient.o
+obj-$(CONFIG_LEDS_TRIGGERS)		+= trigger/
diff --git a/drivers/leds/trigger/Kconfig b/drivers/leds/trigger/Kconfig
new file mode 100644
index 000000000000..eaa286dc494e
--- /dev/null
+++ b/drivers/leds/trigger/Kconfig
@@ -0,0 +1,103 @@
+menuconfig LEDS_TRIGGERS
+	bool "LED Trigger support"
+	depends on LEDS_CLASS
+	help
+	  This option enables trigger support for the leds class.
+	  These triggers allow kernel events to drive the LEDs and can
+	  be configured via sysfs. If unsure, say Y.
+
+if LEDS_TRIGGERS
+
+config LEDS_TRIGGER_TIMER
+	tristate "LED Timer Trigger"
+	depends on LEDS_TRIGGERS
+	help
+	  This allows LEDs to be controlled by a programmable timer
+	  via sysfs. Some LED hardware can be programmed to start
+	  blinking the LED without any further software interaction.
+	  For more details read Documentation/leds/leds-class.txt.
+
+	  If unsure, say Y.
+
+config LEDS_TRIGGER_ONESHOT
+	tristate "LED One-shot Trigger"
+	depends on LEDS_TRIGGERS
+	help
+	  This allows LEDs to blink in one-shot pulses with parameters
+	  controlled via sysfs.  It's useful to notify the user on
+	  sporadic events, when there are no clear begin and end trap points,
+	  or on dense events, where this blinks the LED at constant rate if
+	  rearmed continuously.
+
+	  It also shows how to use the led_blink_set_oneshot() function.
+
+	  If unsure, say Y.
+
+config LEDS_TRIGGER_IDE_DISK
+	bool "LED IDE Disk Trigger"
+	depends on IDE_GD_ATA
+	depends on LEDS_TRIGGERS
+	help
+	  This allows LEDs to be controlled by IDE disk activity.
+	  If unsure, say Y.
+
+config LEDS_TRIGGER_HEARTBEAT
+	tristate "LED Heartbeat Trigger"
+	depends on LEDS_TRIGGERS
+	help
+	  This allows LEDs to be controlled by a CPU load average.
+	  The flash frequency is a hyperbolic function of the 1-minute
+	  load average.
+	  If unsure, say Y.
+
+config LEDS_TRIGGER_BACKLIGHT
+	tristate "LED backlight Trigger"
+	depends on LEDS_TRIGGERS
+	help
+	  This allows LEDs to be controlled as a backlight device: they
+	  turn off and on when the display is blanked and unblanked.
+
+	  If unsure, say N.
+
+config LEDS_TRIGGER_CPU
+	bool "LED CPU Trigger"
+	depends on LEDS_TRIGGERS
+	help
+	  This allows LEDs to be controlled by active CPUs. This shows
+	  the active CPUs across an array of LEDs so you can see which
+	  CPUs are active on the system at any given moment.
+
+	  If unsure, say N.
+
+config LEDS_TRIGGER_GPIO
+	tristate "LED GPIO Trigger"
+	depends on LEDS_TRIGGERS
+	depends on GPIOLIB
+	help
+	  This allows LEDs to be controlled by gpio events. It's good
+	  when using gpios as switches and triggering the needed LEDs
+	  from there. One use case is n810's keypad LEDs that could
+	  be triggered by this trigger when user slides up to show
+	  keypad.
+
+	  If unsure, say N.
+
+config LEDS_TRIGGER_DEFAULT_ON
+	tristate "LED Default ON Trigger"
+	depends on LEDS_TRIGGERS
+	help
+	  This allows LEDs to be initialised in the ON state.
+	  If unsure, say Y.
+
+comment "iptables trigger is under Netfilter config (LED target)"
+	depends on LEDS_TRIGGERS
+
+config LEDS_TRIGGER_TRANSIENT
+	tristate "LED Transient Trigger"
+	depends on LEDS_TRIGGERS
+	help
+	  This allows one time activation of a transient state on
+	  GPIO/PWM based hardware.
+	  If unsure, say Y.
+
+endif # LEDS_TRIGGERS
diff --git a/drivers/leds/trigger/Makefile b/drivers/leds/trigger/Makefile
new file mode 100644
index 000000000000..554e46ee4c24
--- /dev/null
+++ b/drivers/leds/trigger/Makefile
@@ -0,0 +1,9 @@
+obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
+obj-$(CONFIG_LEDS_TRIGGER_ONESHOT)	+= ledtrig-oneshot.o
+obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK)	+= ledtrig-ide-disk.o
+obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+= ledtrig-heartbeat.o
+obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT)	+= ledtrig-backlight.o
+obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledtrig-gpio.o
+obj-$(CONFIG_LEDS_TRIGGER_CPU)		+= ledtrig-cpu.o
+obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
+obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT)	+= ledtrig-transient.o
diff --git a/drivers/leds/ledtrig-backlight.c b/drivers/leds/trigger/ledtrig-backlight.c
index 027a2b15d7d8..3c9c88a07eb8 100644
--- a/drivers/leds/ledtrig-backlight.c
+++ b/drivers/leds/trigger/ledtrig-backlight.c
@@ -16,7 +16,7 @@
 #include <linux/init.h>
 #include <linux/fb.h>
 #include <linux/leds.h>
-#include "leds.h"
+#include "../leds.h"
 
 #define BLANK		1
 #define UNBLANK		0
diff --git a/drivers/leds/ledtrig-cpu.c b/drivers/leds/trigger/ledtrig-cpu.c
index 4239b3955ff0..118335eccc56 100644
--- a/drivers/leds/ledtrig-cpu.c
+++ b/drivers/leds/trigger/ledtrig-cpu.c
@@ -26,7 +26,7 @@
 #include <linux/percpu.h>
 #include <linux/syscore_ops.h>
 #include <linux/rwsem.h>
-#include "leds.h"
+#include "../leds.h"
 
 #define MAX_NAME_LEN	8
 
diff --git a/drivers/leds/ledtrig-default-on.c b/drivers/leds/trigger/ledtrig-default-on.c
index eac1f1b1adac..81a91be8e18d 100644
--- a/drivers/leds/ledtrig-default-on.c
+++ b/drivers/leds/trigger/ledtrig-default-on.c
@@ -15,7 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/leds.h>
-#include "leds.h"
+#include "../leds.h"
 
 static void defon_trig_activate(struct led_classdev *led_cdev)
 {
diff --git a/drivers/leds/ledtrig-gpio.c b/drivers/leds/trigger/ledtrig-gpio.c
index 72e3ebfc281f..35812e3a37f2 100644
--- a/drivers/leds/ledtrig-gpio.c
+++ b/drivers/leds/trigger/ledtrig-gpio.c
@@ -17,7 +17,7 @@
 #include <linux/workqueue.h>
 #include <linux/leds.h>
 #include <linux/slab.h>
-#include "leds.h"
+#include "../leds.h"
 
 struct gpio_trig_data {
 	struct led_classdev *led;
diff --git a/drivers/leds/ledtrig-heartbeat.c b/drivers/leds/trigger/ledtrig-heartbeat.c
index 1edc7463ce83..5c8464a33172 100644
--- a/drivers/leds/ledtrig-heartbeat.c
+++ b/drivers/leds/trigger/ledtrig-heartbeat.c
@@ -19,7 +19,7 @@
 #include <linux/sched.h>
 #include <linux/leds.h>
 #include <linux/reboot.h>
-#include "leds.h"
+#include "../leds.h"
 
 static int panic_heartbeats;
 
diff --git a/drivers/leds/ledtrig-ide-disk.c b/drivers/leds/trigger/ledtrig-ide-disk.c
index 2cd7c0cf5924..2cd7c0cf5924 100644
--- a/drivers/leds/ledtrig-ide-disk.c
+++ b/drivers/leds/trigger/ledtrig-ide-disk.c
diff --git a/drivers/leds/ledtrig-oneshot.c b/drivers/leds/trigger/ledtrig-oneshot.c
index 2c029aa5c4f1..cb4c7466692a 100644
--- a/drivers/leds/ledtrig-oneshot.c
+++ b/drivers/leds/trigger/ledtrig-oneshot.c
@@ -18,7 +18,7 @@
 #include <linux/ctype.h>
 #include <linux/slab.h>
 #include <linux/leds.h>
-#include "leds.h"
+#include "../leds.h"
 
 #define DEFAULT_DELAY 100
 
diff --git a/drivers/leds/ledtrig-timer.c b/drivers/leds/trigger/ledtrig-timer.c
index f774d0592204..8d09327b5719 100644
--- a/drivers/leds/ledtrig-timer.c
+++ b/drivers/leds/trigger/ledtrig-timer.c
@@ -17,7 +17,6 @@
 #include <linux/device.h>
 #include <linux/ctype.h>
 #include <linux/leds.h>
-#include "leds.h"
 
 static ssize_t led_delay_on_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
diff --git a/drivers/leds/ledtrig-transient.c b/drivers/leds/trigger/ledtrig-transient.c
index 398f1042c43e..e5abc00bb00c 100644
--- a/drivers/leds/ledtrig-transient.c
+++ b/drivers/leds/trigger/ledtrig-transient.c
@@ -25,7 +25,7 @@
 #include <linux/slab.h>
 #include <linux/timer.h>
 #include <linux/leds.h>
-#include "leds.h"
+#include "../leds.h"
 
 struct transient_trig_data {
 	int activate;