diff options
author | Mauro Carvalho Chehab <mchehab@redhat.com> | 2011-07-20 21:51:42 -0300 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@redhat.com> | 2012-01-04 22:18:07 -0200 |
commit | 059cd82d25e84b36df4fa4280135f9e3806279f4 (patch) | |
tree | 2108a0964cd194ec9729228ccdc26f108bba0a8a /drivers/media/common/tuners/mt2063.c | |
parent | bf97555e08360bb57b5655da40ebe5818e84cd48 (diff) |
[media] mt2063: Remove unused stuff
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers/media/common/tuners/mt2063.c')
-rw-r--r-- | drivers/media/common/tuners/mt2063.c | 512 |
1 files changed, 0 insertions, 512 deletions
diff --git a/drivers/media/common/tuners/mt2063.c b/drivers/media/common/tuners/mt2063.c index 85980cc3ce38..c18133254793 100644 --- a/drivers/media/common/tuners/mt2063.c +++ b/drivers/media/common/tuners/mt2063.c @@ -366,47 +366,6 @@ static void MT2063_Sleep(void *hUserData, u32 nMinDelayTime) msleep(nMinDelayTime); } -/***************************************************************************** -** -** Name: MT_TunerGain (MT2060 only) -** -** Description: Measure the relative tuner gain using the demodulator -** -** Parameters: hUserData - User-specific I/O parameter that was -** passed to tuner's Open function. -** pMeas - Tuner gain (1/100 of dB scale). -** ie. 1234 = 12.34 (dB) -** -** Returns: status: -** MT_OK - No errors -** user-defined errors could be set -** -** Notes: This is a callback function that is called from the -** the 1st IF location routine. You MUST provide -** code that measures the relative tuner gain in a dB -** (not linear) scale. The return value is an integer -** value scaled to 1/100 of a dB. -** -** Revision History: -** -** SCR Date Author Description -** ------------------------------------------------------------------------- -** N/A 06-16-2004 DAD Original -** N/A 11-30-2004 DAD Renamed from MT_DemodInputPower. This name -** better describes what this function does. -** -*****************************************************************************/ -static u32 MT2060_TunerGain(void *hUserData, s32 * pMeas) -{ - u32 status = MT2063_OK; /* Status to be returned */ - - /* - ** ToDo: Add code here to return the gain / power level measured - ** at the input to the demodulator. - */ - - return (status); -} //end of mt2063_userdef.c //================================================================= //################################################################# @@ -1412,11 +1371,6 @@ static u32 MT2063_AvoidSpurs(void *h, struct MT2063_AvoidSpursData_t * pAS_Info) return (status); } -static u32 MT2063_AvoidSpursVersion(void) -{ - return (MT2063_SPUR_VERSION); -} - //end of mt2063_spuravoid.c //================================================================= //################################################################# @@ -1473,8 +1427,6 @@ static const u32 MT2063_Num_Registers = MT2063_REG_END_REGS; #define USE_GLOBAL_TUNER 0 static u32 nMT2063MaxTuners = 1; -static struct MT2063_Info_t MT2063_Info[1]; -static struct MT2063_Info_t *MT2063_Avail[1]; static u32 nMT2063OpenTuners = 0; /* @@ -1653,64 +1605,6 @@ static u32 MT2063_Close(void *hMT2063) return MT2063_OK; } -/****************************************************************************** -** -** Name: MT2063_GetGPIO -** -** Description: Get the current MT2063 GPIO value. -** -** Parameters: h - Open handle to the tuner (from MT2063_Open). -** gpio_id - Selects GPIO0, GPIO1 or GPIO2 -** attr - Selects input readback, I/O direction or -** output value -** *value - current setting of GPIO pin -** -** Usage: status = MT2063_GetGPIO(hMT2063, MT2063_GPIO_OUT, &value); -** -** Returns: status: -** MT_OK - No errors -** MT_COMM_ERR - Serial bus communications error -** MT_INV_HANDLE - Invalid tuner handle -** MT_ARG_NULL - Null pointer argument passed -** -** Dependencies: MT_ReadSub - Read byte(s) of data from the serial bus -** -** Revision History: -** -** SCR Date Author Description -** ------------------------------------------------------------------------- -** 138 06-19-2007 DAD Ver 1.00: Initial, derived from mt2067_b. -** -******************************************************************************/ -static u32 MT2063_GetGPIO(void *h, enum MT2063_GPIO_ID gpio_id, - enum MT2063_GPIO_Attr attr, u32 * value) -{ - u32 status = MT2063_OK; /* Status to be returned */ - u8 regno; - s32 shift; - static u8 GPIOreg[3] = - { MT2063_REG_RF_STATUS, MT2063_REG_FIF_OV, MT2063_REG_RF_OV }; - struct MT2063_Info_t *pInfo = (struct MT2063_Info_t *)h; - - if (MT2063_IsValidHandle(pInfo) == 0) - return MT2063_INV_HANDLE; - - if (value == NULL) - return MT2063_ARG_NULL; - - regno = GPIOreg[attr]; - - /* We'll read the register just in case the write didn't work last time */ - status = - MT2063_ReadSub(pInfo->hUserData, pInfo->address, regno, - &pInfo->reg[regno], 1); - - shift = (gpio_id - MT2063_GPIO0 + 5); - *value = (pInfo->reg[regno] >> shift) & 1; - - return (status); -} - /**************************************************************************** ** ** Name: MT2063_GetLocked @@ -2303,141 +2197,6 @@ static u32 MT2063_GetReg(void *h, u8 reg, u8 * val) /****************************************************************************** ** -** Name: MT2063_GetTemp -** -** Description: Get the MT2063 Temperature register. -** -** Parameters: h - Open handle to the tuner (from MT2063_Open). -** *value - value read from the register -** -** Binary -** Value Returned Value Approx Temp -** --------------------------------------------- -** MT2063_T_0C 0000 0C -** MT2063_T_10C 0001 10C -** MT2063_T_20C 0010 20C -** MT2063_T_30C 0011 30C -** MT2063_T_40C 0100 40C -** MT2063_T_50C 0101 50C -** MT2063_T_60C 0110 60C -** MT2063_T_70C 0111 70C -** MT2063_T_80C 1000 80C -** MT2063_T_90C 1001 90C -** MT2063_T_100C 1010 100C -** MT2063_T_110C 1011 110C -** MT2063_T_120C 1100 120C -** MT2063_T_130C 1101 130C -** MT2063_T_140C 1110 140C -** MT2063_T_150C 1111 150C -** -** Returns: status: -** MT_OK - No errors -** MT_COMM_ERR - Serial bus communications error -** MT_INV_HANDLE - Invalid tuner handle -** MT_ARG_NULL - Null pointer argument passed -** MT_ARG_RANGE - Argument out of range -** -** Dependencies: MT_ReadSub - Read byte(s) of data from the two-wire bus -** MT_WriteSub - Write byte(s) of data to the two-wire bus -** -** Revision History: -** -** SCR Date Author Description -** ------------------------------------------------------------------------- -** 138 06-19-2007 DAD Ver 1.00: Initial, derived from mt2067_b. -** -******************************************************************************/ -static u32 MT2063_GetTemp(void *h, enum MT2063_Temperature * value) -{ - u32 status = MT2063_OK; /* Status to be returned */ - struct MT2063_Info_t *pInfo = (struct MT2063_Info_t *)h; - - if (MT2063_IsValidHandle(pInfo) == 0) - return MT2063_INV_HANDLE; - - if (value == NULL) - return MT2063_ARG_NULL; - - if ((MT2063_NO_ERROR(status)) - && ((pInfo->reg[MT2063_REG_TEMP_SEL] & 0xE0) != 0x00)) { - pInfo->reg[MT2063_REG_TEMP_SEL] &= (0x1F); - status |= MT2063_WriteSub(pInfo->hUserData, - pInfo->address, - MT2063_REG_TEMP_SEL, - &pInfo->reg[MT2063_REG_TEMP_SEL], 1); - } - - if (MT2063_NO_ERROR(status)) - status |= MT2063_ReadSub(pInfo->hUserData, - pInfo->address, - MT2063_REG_TEMP_STATUS, - &pInfo->reg[MT2063_REG_TEMP_STATUS], - 1); - - if (MT2063_NO_ERROR(status)) - *value = - (enum MT2063_Temperature)(pInfo-> - reg[MT2063_REG_TEMP_STATUS] >> 4); - - return (status); -} - -/**************************************************************************** -** -** Name: MT2063_GetUserData -** -** Description: Gets the user-defined data item. -** -** Parameters: h - Tuner handle (returned by MT2063_Open) -** -** Returns: status: -** MT_OK - No errors -** MT_INV_HANDLE - Invalid tuner handle -** MT_ARG_NULL - Null pointer argument passed -** -** Dependencies: USERS MUST CALL MT2063_Open() FIRST! -** -** The hUserData parameter is a user-specific argument -** that is stored internally with the other tuner- -** specific information. -** -** For example, if additional arguments are needed -** for the user to identify the device communicating -** with the tuner, this argument can be used to supply -** the necessary information. -** -** The hUserData parameter is initialized in the tuner's -** Open function to NULL. -** -** See Also: MT2063_Open -** -** Revision History: -** -** SCR Date Author Description -** ------------------------------------------------------------------------- -** 138 06-19-2007 DAD Ver 1.00: Initial, derived from mt2067_b. -** -****************************************************************************/ -static u32 MT2063_GetUserData(void *h, void ** hUserData) -{ - u32 status = MT2063_OK; /* Status to be returned */ - struct MT2063_Info_t *pInfo = (struct MT2063_Info_t *)h; - - /* Verify that the handle passed points to a valid tuner */ - if (MT2063_IsValidHandle(pInfo) == 0) - status = MT2063_INV_HANDLE; - - if (hUserData == NULL) - status |= MT2063_ARG_NULL; - - if (MT2063_NO_ERROR(status)) - *hUserData = pInfo->hUserData; - - return (status); -} - -/****************************************************************************** -** ** Name: MT2063_SetReceiverMode ** ** Description: Set the MT2063 receiver mode @@ -2929,61 +2688,6 @@ static u32 MT2063_ReInit(void *h) return (status); } -/****************************************************************************** -** -** Name: MT2063_SetGPIO -** -** Description: Modify the MT2063 GPIO value. -** -** Parameters: h - Open handle to the tuner (from MT2063_Open). -** gpio_id - Selects GPIO0, GPIO1 or GPIO2 -** attr - Selects input readback, I/O direction or -** output value -** value - value to set GPIO pin 15, 14 or 19 -** -** Usage: status = MT2063_SetGPIO(hMT2063, MT2063_GPIO1, MT2063_GPIO_OUT, 1); -** -** Returns: status: -** MT_OK - No errors -** MT_COMM_ERR - Serial bus communications error -** MT_INV_HANDLE - Invalid tuner handle -** -** Dependencies: MT_WriteSub - Write byte(s) of data to the two-wire-bus -** -** Revision History: -** -** SCR Date Author Description -** ------------------------------------------------------------------------- -** 138 06-19-2007 DAD Ver 1.00: Initial, derived from mt2067_b. -** -******************************************************************************/ -static u32 MT2063_SetGPIO(void *h, enum MT2063_GPIO_ID gpio_id, - enum MT2063_GPIO_Attr attr, u32 value) -{ - u32 status = MT2063_OK; /* Status to be returned */ - u8 regno; - s32 shift; - static u8 GPIOreg[3] = { 0x15, 0x19, 0x18 }; - struct MT2063_Info_t *pInfo = (struct MT2063_Info_t *)h; - - if (MT2063_IsValidHandle(pInfo) == 0) - return MT2063_INV_HANDLE; - - regno = GPIOreg[attr]; - - shift = (gpio_id - MT2063_GPIO0 + 5); - - if (value & 0x01) - pInfo->reg[regno] |= (0x01 << shift); - else - pInfo->reg[regno] &= ~(0x01 << shift); - status = - MT2063_WriteSub(pInfo->hUserData, pInfo->address, regno, - &pInfo->reg[regno], 1); - - return (status); -} - /**************************************************************************** ** ** Name: MT2063_SetParam @@ -3662,63 +3366,6 @@ static u32 MT2063_SetParam(void *h, enum MT2063_Param param, u32 nValue) /**************************************************************************** ** -** Name: MT2063_SetPowerMaskBits -** -** Description: Sets the power-down mask bits for various sections of -** the MT2063 -** -** Parameters: h - Tuner handle (returned by MT2063_Open) -** Bits - Mask bits to be set. -** -** See definition of MT2063_Mask_Bits type for description -** of each of the power bits. -** -** Returns: status: -** MT_OK - No errors -** MT_INV_HANDLE - Invalid tuner handle -** MT_COMM_ERR - Serial bus communications error -** -** Dependencies: USERS MUST CALL MT2063_Open() FIRST! -** -** Revision History: -** -** SCR Date Author Description -** ------------------------------------------------------------------------- -** 138 06-19-2007 DAD Ver 1.00: Initial, derived from mt2067_b. -** -****************************************************************************/ -static u32 MT2063_SetPowerMaskBits(void *h, enum MT2063_Mask_Bits Bits) -{ - u32 status = MT2063_OK; /* Status to be returned */ - struct MT2063_Info_t *pInfo = (struct MT2063_Info_t *)h; - - /* Verify that the handle passed points to a valid tuner */ - if (MT2063_IsValidHandle(pInfo) == 0) - status = MT2063_INV_HANDLE; - else { - Bits = (enum MT2063_Mask_Bits)(Bits & MT2063_ALL_SD); /* Only valid bits for this tuner */ - if ((Bits & 0xFF00) != 0) { - pInfo->reg[MT2063_REG_PWR_2] |= - (u8) ((Bits & 0xFF00) >> 8); - status |= - MT2063_WriteSub(pInfo->hUserData, pInfo->address, - MT2063_REG_PWR_2, - &pInfo->reg[MT2063_REG_PWR_2], 1); - } - if ((Bits & 0xFF) != 0) { - pInfo->reg[MT2063_REG_PWR_1] |= ((u8) Bits & 0xFF); - status |= - MT2063_WriteSub(pInfo->hUserData, pInfo->address, - MT2063_REG_PWR_1, - &pInfo->reg[MT2063_REG_PWR_1], 1); - } - } - - return (status); -} - -/**************************************************************************** -** ** Name: MT2063_ClearPowerMaskBits ** ** Description: Clears the power-down mask bits for various sections of @@ -3775,111 +3422,6 @@ static u32 MT2063_ClearPowerMaskBits(void *h, enum MT2063_Mask_Bits Bits) /**************************************************************************** ** -** Name: MT2063_GetPowerMaskBits -** -** Description: Returns a mask of the enabled power shutdown bits -** -** Parameters: h - Tuner handle (returned by MT2063_Open) -** Bits - Mask bits to currently set. -** -** See definition of MT2063_Mask_Bits type for description -** of each of the power bits. -** -** Returns: status: -** MT_OK - No errors -** MT_INV_HANDLE - Invalid tuner handle -** MT_ARG_NULL - Output argument is NULL -** MT_COMM_ERR - Serial bus communications error -** -** Dependencies: USERS MUST CALL MT2063_Open() FIRST! -** -** Revision History: -** -** SCR Date Author Description -** ------------------------------------------------------------------------- -** 138 06-19-2007 DAD Ver 1.00: Initial, derived from mt2067_b. -** -****************************************************************************/ -static u32 MT2063_GetPowerMaskBits(void *h, enum MT2063_Mask_Bits * Bits) -{ - u32 status = MT2063_OK; /* Status to be returned */ - struct MT2063_Info_t *pInfo = (struct MT2063_Info_t *)h; - - /* Verify that the handle passed points to a valid tuner */ - if (MT2063_IsValidHandle(pInfo) == 0) - status = MT2063_INV_HANDLE; - else { - if (Bits == NULL) - status |= MT2063_ARG_NULL; - - if (MT2063_NO_ERROR(status)) - status |= - MT2063_ReadSub(pInfo->hUserData, pInfo->address, - MT2063_REG_PWR_1, - &pInfo->reg[MT2063_REG_PWR_1], 2); - - if (MT2063_NO_ERROR(status)) { - *Bits = - (enum - MT2063_Mask_Bits)(((s32) pInfo-> - reg[MT2063_REG_PWR_2] << 8) + - pInfo->reg[MT2063_REG_PWR_1]); - *Bits = (enum MT2063_Mask_Bits)(*Bits & MT2063_ALL_SD); /* Only valid bits for this tuner */ - } - } - - return (status); -} - -/**************************************************************************** -** -** Name: MT2063_EnableExternalShutdown -** -** Description: Enables or disables the operation of the external -** shutdown pin -** -** Parameters: h - Tuner handle (returned by MT2063_Open) -** Enabled - 0 = disable the pin, otherwise enable it -** -** Returns: status: -** MT_OK - No errors -** MT_INV_HANDLE - Invalid tuner handle -** MT_COMM_ERR - Serial bus communications error -** -** Dependencies: USERS MUST CALL MT2063_Open() FIRST! -** -** Revision History: -** -** SCR Date Author Description -** ------------------------------------------------------------------------- -** 138 06-19-2007 DAD Ver 1.00: Initial, derived from mt2067_b. -** -****************************************************************************/ -static u32 MT2063_EnableExternalShutdown(void *h, u8 Enabled) -{ - u32 status = MT2063_OK; /* Status to be returned */ - struct MT2063_Info_t *pInfo = (struct MT2063_Info_t *)h; - - /* Verify that the handle passed points to a valid tuner */ - if (MT2063_IsValidHandle(pInfo) == 0) - status = MT2063_INV_HANDLE; - else { - if (Enabled == 0) - pInfo->reg[MT2063_REG_PWR_1] &= ~0x08; /* Turn off the bit */ - else - pInfo->reg[MT2063_REG_PWR_1] |= 0x08; /* Turn the bit on */ - - status |= - MT2063_WriteSub(pInfo->hUserData, pInfo->address, - MT2063_REG_PWR_1, - &pInfo->reg[MT2063_REG_PWR_1], 1); - } - - return (status); -} - -/**************************************************************************** -** ** Name: MT2063_SoftwareShutdown ** ** Description: Enables or disables software shutdown function. When @@ -3948,60 +3490,6 @@ static u32 MT2063_SoftwareShutdown(void *h, u8 Shutdown) /**************************************************************************** ** -** Name: MT2063_SetExtSRO -** -** Description: Sets the external SRO driver. -** -** Parameters: h - Tuner handle (returned by MT2063_Open) -** Ext_SRO_Setting - external SRO drive setting -** -** (default) MT2063_EXT_SRO_OFF - ext driver off -** MT2063_EXT_SRO_BY_1 - ext driver = SRO frequency -** MT2063_EXT_SRO_BY_2 - ext driver = SRO/2 frequency -** MT2063_EXT_SRO_BY_4 - ext driver = SRO/4 frequency -** -** Returns: status: -** MT_OK - No errors -** MT_COMM_ERR - Serial bus communications error -** MT_INV_HANDLE - Invalid tuner handle -** -** Dependencies: USERS MUST CALL MT2063_Open() FIRST! -** -** The Ext_SRO_Setting settings default to OFF -** Use this function if you need to override the default -** -** Revision History: -** -** SCR Date Author Description -** ------------------------------------------------------------------------- -** 138 06-19-2007 DAD Ver 1.00: Initial, derived from mt2067_b. -** 189 S 05-13-2008 RSK Ver 1.16: Correct location for ExtSRO control. -** -****************************************************************************/ -static u32 MT2063_SetExtSRO(void *h, enum MT2063_Ext_SRO Ext_SRO_Setting) -{ - u32 status = MT2063_OK; /* Status to be returned */ - struct MT2063_Info_t *pInfo = (struct MT2063_Info_t *)h; - - /* Verify that the handle passed points to a valid tuner */ - if (MT2063_IsValidHandle(pInfo) == 0) - status = MT2063_INV_HANDLE; - else { - pInfo->reg[MT2063_REG_CTRL_2C] = - (pInfo-> - reg[MT2063_REG_CTRL_2C] & 0x3F) | ((u8) Ext_SRO_Setting - << 6); - status = - MT2063_WriteSub(pInfo->hUserData, pInfo->address, - MT2063_REG_CTRL_2C, - &pInfo->reg[MT2063_REG_CTRL_2C], 1); - } - - return (status); -} - -/**************************************************************************** -** ** Name: MT2063_SetReg ** ** Description: Sets an MT2063 register. |