Merge branch 'efm32/soc' into next/soc

From Uwe Kleine-König:
* efm32/soc: (1003 commits)
  ARM: device trees for Energy Micro's EFM32 Cortex-M3 SoCs
  ARM: new platform for Energy Micro's EFM32 Cortex-M3 SoCs
  +Linux 3.13-rc4

Signed-off-by: Kevin Hilman <khilman@linaro.org>

5 files changed, 19 insertions, 18 deletions

diff --git a/drivers/media/dvb-frontends/af9033.c b/drivers/media/dvb-frontends/af9033.c
index 30ee59052157..65728c25ea05 100644
--- a/drivers/media/dvb-frontends/af9033.c
+++ b/drivers/media/dvb-frontends/af9033.c
@@ -170,18 +170,18 @@ static int af9033_rd_reg_mask(struct af9033_state *state, u32 reg, u8 *val,
 static int af9033_wr_reg_val_tab(struct af9033_state *state,
 		const struct reg_val *tab, int tab_len)
 {
+#define MAX_TAB_LEN 212
 	int ret, i, j;
-	u8 buf[MAX_XFER_SIZE];
+	u8 buf[1 + MAX_TAB_LEN];
+
+	dev_dbg(&state->i2c->dev, "%s: tab_len=%d\n", __func__, tab_len);
 
 	if (tab_len > sizeof(buf)) {
-		dev_warn(&state->i2c->dev,
-			 "%s: i2c wr len=%d is too big!\n",
-			 KBUILD_MODNAME, tab_len);
+		dev_warn(&state->i2c->dev, "%s: tab len %d is too big\n",
+				KBUILD_MODNAME, tab_len);
 		return -EINVAL;
 	}
 
-	dev_dbg(&state->i2c->dev, "%s: tab_len=%d\n", __func__, tab_len);
-
 	for (i = 0, j = 0; i < tab_len; i++) {
 		buf[j] = tab[i].val;
 
diff --git a/drivers/media/dvb-frontends/cxd2820r_c.c b/drivers/media/dvb-frontends/cxd2820r_c.c
index 125a44041011..5c6ab4921bf1 100644
--- a/drivers/media/dvb-frontends/cxd2820r_c.c
+++ b/drivers/media/dvb-frontends/cxd2820r_c.c
@@ -78,7 +78,7 @@ int cxd2820r_set_frontend_c(struct dvb_frontend *fe)
 
 	num = if_freq / 1000; /* Hz => kHz */
 	num *= 0x4000;
-	if_ctl = cxd2820r_div_u64_round_closest(num, 41000);
+	if_ctl = 0x4000 - cxd2820r_div_u64_round_closest(num, 41000);
 	buf[0] = (if_ctl >> 8) & 0x3f;
 	buf[1] = (if_ctl >> 0) & 0xff;
 
diff --git a/drivers/media/dvb-frontends/dib8000.c b/drivers/media/dvb-frontends/dib8000.c
index 90536147bf04..6dbbee453ee1 100644
--- a/drivers/media/dvb-frontends/dib8000.c
+++ b/drivers/media/dvb-frontends/dib8000.c
@@ -3048,7 +3048,7 @@ static int dib8000_tune(struct dvb_frontend *fe)
 			dib8000_set_diversity_in(state->fe[0], state->diversity_onoff);
 
 			locks = (dib8000_read_word(state, 180) >> 6) & 0x3f; /* P_coff_winlen ? */
-			/* coff should lock over P_coff_winlen ofdm symbols : give 3 times this lenght to lock */
+			/* coff should lock over P_coff_winlen ofdm symbols : give 3 times this length to lock */
 			*timeout = dib8000_get_timeout(state, 2 * locks, SYMBOL_DEPENDENT_ON);
 			*tune_state = CT_DEMOD_STEP_5;
 			break;
@@ -3115,7 +3115,7 @@ static int dib8000_tune(struct dvb_frontend *fe)
 
 	case CT_DEMOD_STEP_9: /* 39 */
 			if ((state->revision == 0x8090) || ((dib8000_read_word(state, 1291) >> 9) & 0x1)) { /* fe capable of deinterleaving : esram */
-				/* defines timeout for mpeg lock depending on interleaver lenght of longest layer */
+				/* defines timeout for mpeg lock depending on interleaver length of longest layer */
 				for (i = 0; i < 3; i++) {
 					if (c->layer[i].interleaving >= deeper_interleaver) {
 						dprintk("layer%i: time interleaver = %d ", i, c->layer[i].interleaving);
diff --git a/drivers/media/dvb-frontends/drxk_hard.c b/drivers/media/dvb-frontends/drxk_hard.c
index d416c15691da..bf29a3f0e6f0 100644
--- a/drivers/media/dvb-frontends/drxk_hard.c
+++ b/drivers/media/dvb-frontends/drxk_hard.c
@@ -1191,7 +1191,7 @@ static int mpegts_configure_pins(struct drxk_state *state, bool mpeg_enable)
 			goto error;
 
 		if (state->m_enable_parallel == true) {
-			/* paralel -> enable MD1 to MD7 */
+			/* parallel -> enable MD1 to MD7 */
 			status = write16(state, SIO_PDR_MD1_CFG__A,
 					 sio_pdr_mdx_cfg);
 			if (status < 0)
@@ -1428,7 +1428,7 @@ static int mpegts_stop(struct drxk_state *state)
 
 	dprintk(1, "\n");
 
-	/* Gracefull shutdown (byte boundaries) */
+	/* Graceful shutdown (byte boundaries) */
 	status = read16(state, FEC_OC_SNC_MODE__A, &fec_oc_snc_mode);
 	if (status < 0)
 		goto error;
@@ -2021,7 +2021,7 @@ static int mpegts_dto_setup(struct drxk_state *state,
 		fec_oc_dto_burst_len = 204;
 	}
 
-	/* Check serial or parrallel output */
+	/* Check serial or parallel output */
 	fec_oc_reg_ipr_mode &= (~(FEC_OC_IPR_MODE_SERIAL__M));
 	if (state->m_enable_parallel == false) {
 		/* MPEG data output is serial -> set ipr_mode[0] */
@@ -2908,7 +2908,7 @@ static int adc_synchronization(struct drxk_state *state)
 		goto error;
 
 	if (count == 1) {
-		/* Try sampling on a diffrent edge */
+		/* Try sampling on a different edge */
 		u16 clk_neg = 0;
 
 		status = read16(state, IQM_AF_CLKNEG__A, &clk_neg);
@@ -3306,7 +3306,7 @@ static int dvbt_sc_command(struct drxk_state *state,
 	if (status < 0)
 		goto error;
 
-	/* Retreive results parameters from SC */
+	/* Retrieve results parameters from SC */
 	switch (cmd) {
 		/* All commands yielding 5 results */
 		/* All commands yielding 4 results */
@@ -3849,7 +3849,7 @@ static int set_dvbt(struct drxk_state *state, u16 intermediate_freqk_hz,
 		break;
 	}
 #if 0
-	/* No hierachical channels support in BDA */
+	/* No hierarchical channels support in BDA */
 	/* Priority (only for hierarchical channels) */
 	switch (channel->priority) {
 	case DRX_PRIORITY_LOW:
@@ -4081,7 +4081,7 @@ error:
 /*============================================================================*/
 
 /**
-* \brief Retreive lock status .
+* \brief Retrieve lock status .
 * \param demod    Pointer to demodulator instance.
 * \param lockStat Pointer to lock status structure.
 * \return DRXStatus_t.
@@ -6174,7 +6174,7 @@ static int init_drxk(struct drxk_state *state)
 			goto error;
 
 		/* Stamp driver version number in SCU data RAM in BCD code
-			Done to enable field application engineers to retreive drxdriver version
+			Done to enable field application engineers to retrieve drxdriver version
 			via I2C from SCU RAM.
 			Not using SCU command interface for SCU register access since no
 			microcode may be present.
@@ -6399,7 +6399,7 @@ static int drxk_set_parameters(struct dvb_frontend *fe)
 	fe->ops.tuner_ops.get_if_frequency(fe, &IF);
 	start(state, 0, IF);
 
-	/* After set_frontend, stats aren't avaliable */
+	/* After set_frontend, stats aren't available */
 	p->strength.stat[0].scale = FE_SCALE_RELATIVE;
 	p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
 	p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
diff --git a/drivers/media/dvb-frontends/rtl2830.c b/drivers/media/dvb-frontends/rtl2830.c
index 7efb796c472c..50e8b63e5169 100644
--- a/drivers/media/dvb-frontends/rtl2830.c
+++ b/drivers/media/dvb-frontends/rtl2830.c
@@ -710,6 +710,7 @@ struct dvb_frontend *rtl2830_attach(const struct rtl2830_config *cfg,
 		sizeof(priv->tuner_i2c_adapter.name));
 	priv->tuner_i2c_adapter.algo = &rtl2830_tuner_i2c_algo;
 	priv->tuner_i2c_adapter.algo_data = NULL;
+	priv->tuner_i2c_adapter.dev.parent = &i2c->dev;
 	i2c_set_adapdata(&priv->tuner_i2c_adapter, priv);
 	if (i2c_add_adapter(&priv->tuner_i2c_adapter) < 0) {
 		dev_err(&i2c->dev,