[media] lmedm04: fix build

Those files were at the wrong place, probably due to the usage of a
previous version of dvb-usb-v2 tree.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

2 files changed, 1548 insertions, 0 deletions

diff --git a/drivers/media/dvb/dvb-usb-v2/lmedm04.c b/drivers/media/dvb/dvb-usb-v2/lmedm04.c
new file mode 100644
index 000000000000..c6bc1b8b58b8
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb-v2/lmedm04.c
@@ -0,0 +1,1373 @@
+/* DVB USB compliant linux driver for
+ *
+ * DM04/QQBOX DVB-S USB BOX	LME2510C + SHARP:BS2F7HZ7395
+ *				LME2510C + LG TDQY-P001F
+ *				LME2510C + BS2F7HZ0194
+ *				LME2510 + LG TDQY-P001F
+ *				LME2510 + BS2F7HZ0194
+ *
+ * MVB7395 (LME2510C+SHARP:BS2F7HZ7395)
+ * SHARP:BS2F7HZ7395 = (STV0288+Sharp IX2505V)
+ *
+ * MV001F (LME2510+LGTDQY-P001F)
+ * LG TDQY - P001F =(TDA8263 + TDA10086H)
+ *
+ * MVB0001F (LME2510C+LGTDQT-P001F)
+ *
+ * MV0194 (LME2510+SHARP:BS2F7HZ0194)
+ * SHARP:BS2F7HZ0194 = (STV0299+IX2410)
+ *
+ * MVB0194 (LME2510C+SHARP0194)
+ *
+ * LME2510C + M88RS2000
+ *
+ * For firmware see Documentation/dvb/lmedm04.txt
+ *
+ * I2C addresses:
+ * 0xd0 - STV0288	- Demodulator
+ * 0xc0 - Sharp IX2505V	- Tuner
+ * --
+ * 0x1c - TDA10086   - Demodulator
+ * 0xc0 - TDA8263    - Tuner
+ * --
+ * 0xd0 - STV0299	- Demodulator
+ * 0xc0 - IX2410	- Tuner
+ *
+ *
+ * VID = 3344  PID LME2510=1122 LME2510C=1120
+ *
+ * Copyright (C) 2010 Malcolm Priestley (tvboxspy@gmail.com)
+ * LME2510(C)(C) Leaguerme (Shenzhen) MicroElectronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ *
+ * Known Issues :
+ *	LME2510: Non Intel USB chipsets fail to maintain High Speed on
+ * Boot or Hot Plug.
+ *
+ * QQbox suffers from noise on LNB voltage.
+ *
+ *	LME2510: SHARP:BS2F7HZ0194(MV0194) cannot cold reset and share system
+ * with other tuners. After a cold reset streaming will not start.
+ *
+ * M88RS2000 suffers from loss of lock.
+ */
+#define DVB_USB_LOG_PREFIX "LME2510(C)"
+#include <linux/usb.h>
+#include <linux/usb/input.h>
+#include <media/rc-core.h>
+
+#include "dvb_usb.h"
+#include "lmedm04.h"
+#include "tda826x.h"
+#include "tda10086.h"
+#include "stv0288.h"
+#include "ix2505v.h"
+#include "stv0299.h"
+#include "dvb-pll.h"
+#include "z0194a.h"
+#include "m88rs2000.h"
+
+
+#define LME2510_C_S7395	"dvb-usb-lme2510c-s7395.fw";
+#define LME2510_C_LG	"dvb-usb-lme2510c-lg.fw";
+#define LME2510_C_S0194	"dvb-usb-lme2510c-s0194.fw";
+#define LME2510_C_RS2000 "dvb-usb-lme2510c-rs2000.fw";
+#define LME2510_LG	"dvb-usb-lme2510-lg.fw";
+#define LME2510_S0194	"dvb-usb-lme2510-s0194.fw";
+
+/* debug */
+static int dvb_usb_lme2510_debug;
+#define lme_debug(var, level, args...) do { \
+	if ((var >= level)) \
+		pr_debug(DVB_USB_LOG_PREFIX": " args); \
+} while (0)
+#define deb_info(level, args...) lme_debug(dvb_usb_lme2510_debug, level, args)
+#define debug_data_snipet(level, name, p) \
+	 deb_info(level, name" (%02x%02x%02x%02x%02x%02x%02x%02x)", \
+		*p, *(p+1), *(p+2), *(p+3), *(p+4), \
+			*(p+5), *(p+6), *(p+7));
+#define info(args...) pr_info(DVB_USB_LOG_PREFIX": "args)
+
+module_param_named(debug, dvb_usb_lme2510_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able)).");
+
+static int dvb_usb_lme2510_firmware;
+module_param_named(firmware, dvb_usb_lme2510_firmware, int, 0644);
+MODULE_PARM_DESC(firmware, "set default firmware 0=Sharp7395 1=LG");
+
+static int pid_filter;
+module_param_named(pid, pid_filter, int, 0644);
+MODULE_PARM_DESC(pid, "set default 0=default 1=off 2=on");
+
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+#define TUNER_DEFAULT	0x0
+#define TUNER_LG	0x1
+#define TUNER_S7395	0x2
+#define TUNER_S0194	0x3
+#define TUNER_RS2000	0x4
+
+struct lme2510_state {
+	u8 id;
+	u8 tuner_config;
+	u8 signal_lock;
+	u8 signal_level;
+	u8 signal_sn;
+	u8 time_key;
+	u8 last_key;
+	u8 key_timeout;
+	u8 i2c_talk_onoff;
+	u8 i2c_gate;
+	u8 i2c_tuner_gate_w;
+	u8 i2c_tuner_gate_r;
+	u8 i2c_tuner_addr;
+	u8 stream_on;
+	u8 pid_size;
+	u8 pid_off;
+	void *buffer;
+	struct urb *lme_urb;
+	void *usb_buffer;
+	int (*fe_set_voltage)(struct dvb_frontend *, fe_sec_voltage_t);
+	u8 dvb_usb_lme2510_firmware;
+};
+
+static int lme2510_bulk_write(struct usb_device *dev,
+				u8 *snd, int len, u8 pipe)
+{
+	int ret, actual_l;
+
+	ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, pipe),
+				snd, len , &actual_l, 100);
+	return ret;
+}
+
+static int lme2510_bulk_read(struct usb_device *dev,
+				u8 *rev, int len, u8 pipe)
+{
+	int ret, actual_l;
+
+	ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, pipe),
+				 rev, len , &actual_l, 200);
+	return ret;
+}
+
+static int lme2510_usb_talk(struct dvb_usb_device *d,
+		u8 *wbuf, int wlen, u8 *rbuf, int rlen)
+{
+	struct lme2510_state *st = d->priv;
+	u8 *buff;
+	int ret = 0;
+
+	if (st->usb_buffer == NULL) {
+		st->usb_buffer = kmalloc(64, GFP_KERNEL);
+		if (st->usb_buffer == NULL) {
+			info("MEM Error no memory");
+			return -ENOMEM;
+		}
+	}
+	buff = st->usb_buffer;
+
+	ret = mutex_lock_interruptible(&d->usb_mutex);
+
+	if (ret < 0)
+		return -EAGAIN;
+
+	/* the read/write capped at 64 */
+	memcpy(buff, wbuf, (wlen < 64) ? wlen : 64);
+
+	ret |= lme2510_bulk_write(d->udev, buff, wlen , 0x01);
+
+	ret |= lme2510_bulk_read(d->udev, buff, (rlen < 64) ?
+			rlen : 64 , 0x01);
+
+	if (rlen > 0)
+		memcpy(rbuf, buff, rlen);
+
+	mutex_unlock(&d->usb_mutex);
+
+	return (ret < 0) ? -ENODEV : 0;
+}
+
+static int lme2510_stream_restart(struct dvb_usb_device *d)
+{
+	struct lme2510_state *st = d->priv;
+	u8 all_pids[] = LME_ALL_PIDS;
+	u8 stream_on[] = LME_ST_ON_W;
+	int ret;
+	u8 rbuff[1];
+	if (st->pid_off)
+		ret = lme2510_usb_talk(d, all_pids, sizeof(all_pids),
+			rbuff, sizeof(rbuff));
+	/*Restart Stream Command*/
+	ret = lme2510_usb_talk(d, stream_on, sizeof(stream_on),
+			rbuff, sizeof(rbuff));
+	return ret;
+}
+
+static int lme2510_enable_pid(struct dvb_usb_device *d, u8 index, u16 pid_out)
+{
+	struct lme2510_state *st = d->priv;
+	static u8 pid_buff[] = LME_ZERO_PID;
+	static u8 rbuf[1];
+	u8 pid_no = index * 2;
+	u8 pid_len = pid_no + 2;
+	int ret = 0;
+	deb_info(1, "PID Setting Pid %04x", pid_out);
+
+	if (st->pid_size == 0)
+		ret |= lme2510_stream_restart(d);
+
+	pid_buff[2] = pid_no;
+	pid_buff[3] = (u8)pid_out & 0xff;
+	pid_buff[4] = pid_no + 1;
+	pid_buff[5] = (u8)(pid_out >> 8);
+
+	if (pid_len > st->pid_size)
+		st->pid_size = pid_len;
+	pid_buff[7] = 0x80 + st->pid_size;
+
+	ret |= lme2510_usb_talk(d, pid_buff ,
+		sizeof(pid_buff) , rbuf, sizeof(rbuf));
+
+	if (st->stream_on)
+		ret |= lme2510_stream_restart(d);
+
+	return ret;
+}
+
+static void lme2510_int_response(struct urb *lme_urb)
+{
+	struct dvb_usb_adapter *adap = lme_urb->context;
+	struct lme2510_state *st = adap_to_priv(adap);
+	static u8 *ibuf, *rbuf;
+	int i = 0, offset;
+	u32 key;
+
+	switch (lme_urb->status) {
+	case 0:
+	case -ETIMEDOUT:
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		return;
+	default:
+		info("Error %x", lme_urb->status);
+		break;
+	}
+
+	rbuf = (u8 *) lme_urb->transfer_buffer;
+
+	offset = ((lme_urb->actual_length/8) > 4)
+			? 4 : (lme_urb->actual_length/8) ;
+
+	for (i = 0; i < offset; ++i) {
+		ibuf = (u8 *)&rbuf[i*8];
+		deb_info(5, "INT O/S C =%02x C/O=%02x Type =%02x%02x",
+		offset, i, ibuf[0], ibuf[1]);
+
+		switch (ibuf[0]) {
+		case 0xaa:
+			debug_data_snipet(1, "INT Remote data snipet", ibuf);
+			if ((ibuf[4] + ibuf[5]) == 0xff) {
+				key = ibuf[5];
+				key += (ibuf[3] > 0)
+					? (ibuf[3] ^ 0xff) << 8 : 0;
+				key += (ibuf[2] ^ 0xff) << 16;
+				deb_info(1, "INT Key =%08x", key);
+				if (adap_to_d(adap)->rc_dev != NULL)
+					rc_keydown(adap_to_d(adap)->rc_dev,
+						key, 0);
+			}
+			break;
+		case 0xbb:
+			switch (st->tuner_config) {
+			case TUNER_LG:
+				if (ibuf[2] > 0)
+					st->signal_lock = ibuf[2];
+				st->signal_level = ibuf[4];
+				st->signal_sn = ibuf[3];
+				st->time_key = ibuf[7];
+				break;
+			case TUNER_S7395:
+			case TUNER_S0194:
+				/* Tweak for earlier firmware*/
+				if (ibuf[1] == 0x03) {
+					if (ibuf[2] > 1)
+						st->signal_lock = ibuf[2];
+					st->signal_level = ibuf[3];
+					st->signal_sn = ibuf[4];
+				} else {
+					st->signal_level = ibuf[4];
+					st->signal_sn = ibuf[5];
+					st->signal_lock =
+						(st->signal_lock & 0xf7) +
+						((ibuf[2] & 0x01) << 0x03);
+				}
+				break;
+			case TUNER_RS2000:
+				if (ibuf[1] == 0x3 &&  ibuf[6] == 0xff)
+					st->signal_lock = 0xff;
+				else
+					st->signal_lock = 0x00;
+				st->signal_level = ibuf[5];
+				st->signal_sn = ibuf[4];
+				st->time_key = ibuf[7];
+			default:
+				break;
+			}
+			debug_data_snipet(5, "INT Remote data snipet in", ibuf);
+		break;
+		case 0xcc:
+			debug_data_snipet(1, "INT Control data snipet", ibuf);
+			break;
+		default:
+			debug_data_snipet(1, "INT Unknown data snipet", ibuf);
+		break;
+		}
+	}
+	usb_submit_urb(lme_urb, GFP_ATOMIC);
+}
+
+static int lme2510_int_read(struct dvb_usb_adapter *adap)
+{
+	struct dvb_usb_device *d = adap_to_d(adap);
+	struct lme2510_state *lme_int = adap_to_priv(adap);
+
+	lme_int->lme_urb = usb_alloc_urb(0, GFP_ATOMIC);
+
+	if (lme_int->lme_urb == NULL)
+			return -ENOMEM;
+
+	lme_int->buffer = usb_alloc_coherent(d->udev, 128, GFP_ATOMIC,
+					&lme_int->lme_urb->transfer_dma);
+
+	if (lme_int->buffer == NULL)
+			return -ENOMEM;
+
+	usb_fill_int_urb(lme_int->lme_urb,
+				d->udev,
+				usb_rcvintpipe(d->udev, 0xa),
+				lme_int->buffer,
+				128,
+				lme2510_int_response,
+				adap,
+				8);
+
+	lme_int->lme_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	usb_submit_urb(lme_int->lme_urb, GFP_ATOMIC);
+	info("INT Interrupt Service Started");
+
+	return 0;
+}
+
+static int lme2510_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+	struct dvb_usb_device *d = adap_to_d(adap);
+	struct lme2510_state *st = adap_to_priv(adap);
+	static u8 clear_pid_reg[] = LME_ALL_PIDS;
+	static u8 rbuf[1];
+	int ret = 0;
+
+	deb_info(1, "PID Clearing Filter");
+
+	mutex_lock(&d->i2c_mutex);
+
+	if (!onoff) {
+		ret |= lme2510_usb_talk(d, clear_pid_reg,
+			sizeof(clear_pid_reg), rbuf, sizeof(rbuf));
+		st->pid_off = true;
+	} else
+		st->pid_off = false;
+
+	st->pid_size = 0;
+
+	mutex_unlock(&d->i2c_mutex);
+
+	return 0;
+}
+
+static int lme2510_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,
+	int onoff)
+{
+	struct dvb_usb_device *d = adap_to_d(adap);
+	int ret = 0;
+
+	deb_info(3, "%s PID=%04x Index=%04x onoff=%02x", __func__,
+		pid, index, onoff);
+
+	if (onoff) {
+		mutex_lock(&d->i2c_mutex);
+		ret |= lme2510_enable_pid(d, index, pid);
+		mutex_unlock(&d->i2c_mutex);
+	}
+
+
+	return ret;
+}
+
+
+static int lme2510_return_status(struct dvb_usb_device *d)
+{
+	int ret = 0;
+	u8 *data;
+
+	data = kzalloc(10, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	ret |= usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
+			0x06, 0x80, 0x0302, 0x00, data, 0x0006, 200);
+	info("Firmware Status: %x (%x)", ret , data[2]);
+
+	ret = (ret < 0) ? -ENODEV : data[2];
+	kfree(data);
+	return ret;
+}
+
+static int lme2510_msg(struct dvb_usb_device *d,
+		u8 *wbuf, int wlen, u8 *rbuf, int rlen)
+{
+	int ret = 0;
+	struct lme2510_state *st = d->priv;
+
+	if (st->i2c_talk_onoff == 1) {
+
+		ret = lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
+
+		switch (st->tuner_config) {
+		case TUNER_LG:
+			if (wbuf[2] == 0x1c) {
+				if (wbuf[3] == 0x0e) {
+					st->signal_lock = rbuf[1];
+					if ((st->stream_on & 1) &&
+						(st->signal_lock & 0x10)) {
+						lme2510_stream_restart(d);
+						st->i2c_talk_onoff = 0;
+					}
+					msleep(80);
+				}
+			}
+			break;
+		case TUNER_S7395:
+			if (wbuf[2] == 0xd0) {
+				if (wbuf[3] == 0x24) {
+					st->signal_lock = rbuf[1];
+					if ((st->stream_on & 1) &&
+						(st->signal_lock & 0x8)) {
+						lme2510_stream_restart(d);
+						st->i2c_talk_onoff = 0;
+					}
+				}
+			}
+			break;
+		case TUNER_S0194:
+			if (wbuf[2] == 0xd0) {
+				if (wbuf[3] == 0x1b) {
+					st->signal_lock = rbuf[1];
+					if ((st->stream_on & 1) &&
+						(st->signal_lock & 0x8)) {
+						lme2510_stream_restart(d);
+						st->i2c_talk_onoff = 0;
+					}
+				}
+			}
+			break;
+		case TUNER_RS2000:
+		default:
+			break;
+		}
+	} else {
+		/* TODO rewrite this section */
+		switch (st->tuner_config) {
+		case TUNER_LG:
+			switch (wbuf[3]) {
+			case 0x0e:
+				rbuf[0] = 0x55;
+				rbuf[1] = st->signal_lock;
+				break;
+			case 0x43:
+				rbuf[0] = 0x55;
+				rbuf[1] = st->signal_level;
+				break;
+			case 0x1c:
+				rbuf[0] = 0x55;
+				rbuf[1] = st->signal_sn;
+				break;
+			case 0x15:
+			case 0x16:
+			case 0x17:
+			case 0x18:
+				rbuf[0] = 0x55;
+				rbuf[1] = 0x00;
+				break;
+			default:
+				lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
+				st->i2c_talk_onoff = 1;
+				break;
+			}
+			break;
+		case TUNER_S7395:
+			switch (wbuf[3]) {
+			case 0x10:
+				rbuf[0] = 0x55;
+				rbuf[1] = (st->signal_level & 0x80)
+						? 0 : (st->signal_level * 2);
+				break;
+			case 0x2d:
+				rbuf[0] = 0x55;
+				rbuf[1] = st->signal_sn;
+				break;
+			case 0x24:
+				rbuf[0] = 0x55;
+				rbuf[1] = st->signal_lock;
+				break;
+			case 0x2e:
+			case 0x26:
+			case 0x27:
+				rbuf[0] = 0x55;
+				rbuf[1] = 0x00;
+				break;
+			default:
+				lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
+				st->i2c_talk_onoff = 1;
+				break;
+			}
+			break;
+		case TUNER_S0194:
+			switch (wbuf[3]) {
+			case 0x18:
+				rbuf[0] = 0x55;
+				rbuf[1] = (st->signal_level & 0x80)
+						? 0 : (st->signal_level * 2);
+				break;
+			case 0x24:
+				rbuf[0] = 0x55;
+				rbuf[1] = st->signal_sn;
+				break;
+			case 0x1b:
+				rbuf[0] = 0x55;
+				rbuf[1] = st->signal_lock;
+				break;
+			case 0x19:
+			case 0x25:
+			case 0x1e:
+			case 0x1d:
+				rbuf[0] = 0x55;
+				rbuf[1] = 0x00;
+				break;
+			default:
+				lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
+				st->i2c_talk_onoff = 1;
+				break;
+			}
+			break;
+		case TUNER_RS2000:
+			switch (wbuf[3]) {
+			case 0x8c:
+				rbuf[0] = 0x55;
+				rbuf[1] = 0xff;
+				if (st->last_key == st->time_key) {
+					st->key_timeout++;
+					if (st->key_timeout > 5)
+						rbuf[1] = 0;
+				} else
+					st->key_timeout = 0;
+				st->last_key = st->time_key;
+				break;
+			default:
+				lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
+				st->i2c_talk_onoff = 1;
+				break;
+			}
+		default:
+			break;
+		}
+
+		deb_info(4, "I2C From Interrupt Message out(%02x) in(%02x)",
+				wbuf[3], rbuf[1]);
+
+	}
+
+	return ret;
+}
+
+
+static int lme2510_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+				 int num)
+{
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	struct lme2510_state *st = d->priv;
+	static u8 obuf[64], ibuf[64];
+	int i, read, read_o;
+	u16 len;
+	u8 gate = st->i2c_gate;
+
+	mutex_lock(&d->i2c_mutex);
+
+	if (gate == 0)
+		gate = 5;
+
+	for (i = 0; i < num; i++) {
+		read_o = 1 & (msg[i].flags & I2C_M_RD);
+		read = i+1 < num && (msg[i+1].flags & I2C_M_RD);
+		read |= read_o;
+		gate = (msg[i].addr == st->i2c_tuner_addr)
+			? (read)	? st->i2c_tuner_gate_r
+					: st->i2c_tuner_gate_w
+			: st->i2c_gate;
+		obuf[0] = gate | (read << 7);
+
+		if (gate == 5)
+			obuf[1] = (read) ? 2 : msg[i].len + 1;
+		else
+			obuf[1] = msg[i].len + read + 1;
+
+		obuf[2] = msg[i].addr;
+		if (read) {
+			if (read_o)
+				len = 3;
+			else {
+				memcpy(&obuf[3], msg[i].buf, msg[i].len);
+				obuf[msg[i].len+3] = msg[i+1].len;
+				len = msg[i].len+4;
+			}
+		} else {
+			memcpy(&obuf[3], msg[i].buf, msg[i].len);
+			len = msg[i].len+3;
+		}
+
+		if (lme2510_msg(d, obuf, len, ibuf, 64) < 0) {
+			deb_info(1, "i2c transfer failed.");
+			mutex_unlock(&d->i2c_mutex);
+			return -EAGAIN;
+		}
+
+		if (read) {
+			if (read_o)
+				memcpy(msg[i].buf, &ibuf[1], msg[i].len);
+			else {
+				memcpy(msg[i+1].buf, &ibuf[1], msg[i+1].len);
+				i++;
+			}
+		}
+	}
+
+	mutex_unlock(&d->i2c_mutex);
+	return i;
+}
+
+static u32 lme2510_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm lme2510_i2c_algo = {
+	.master_xfer   = lme2510_i2c_xfer,
+	.functionality = lme2510_i2c_func,
+};
+
+static int lme2510_streaming_ctrl(struct dvb_frontend *fe, int onoff)
+{
+	struct dvb_usb_adapter *adap = fe_to_adap(fe);
+	struct dvb_usb_device *d = adap_to_d(adap);
+	struct lme2510_state *st = adap_to_priv(adap);
+	static u8 clear_reg_3[] = LME_ALL_PIDS;
+	static u8 rbuf[1];
+	int ret = 0, rlen = sizeof(rbuf);
+
+	deb_info(1, "STM  (%02x)", onoff);
+
+	/* Streaming is started by FE_HAS_LOCK */
+	if (onoff == 1)
+		st->stream_on = 1;
+	else {
+		deb_info(1, "STM Steam Off");
+		/* mutex is here only to avoid collision with I2C */
+		mutex_lock(&d->i2c_mutex);
+
+		ret = lme2510_usb_talk(d, clear_reg_3,
+				sizeof(clear_reg_3), rbuf, rlen);
+		st->stream_on = 0;
+		st->i2c_talk_onoff = 1;
+
+		mutex_unlock(&d->i2c_mutex);
+	}
+
+	return (ret < 0) ? -ENODEV : 0;
+}
+
+static u8 check_sum(u8 *p, u8 len)
+{
+	u8 sum = 0;
+	while (len--)
+		sum += *p++;
+	return sum;
+}
+
+static int lme2510_download_firmware(struct dvb_usb_device *d,
+					const struct firmware *fw)
+{
+	int ret = 0;
+	u8 *data;
+	u16 j, wlen, len_in, start, end;
+	u8 packet_size, dlen, i;
+	u8 *fw_data;
+
+	packet_size = 0x31;
+	len_in = 1;
+
+	data = kzalloc(128, GFP_KERNEL);
+	if (!data) {
+		info("FRM Could not start Firmware Download"\
+			"(Buffer allocation failed)");
+		return -ENOMEM;
+	}
+
+	info("FRM Starting Firmware Download");
+
+	for (i = 1; i < 3; i++) {
+		start = (i == 1) ? 0 : 512;
+		end = (i == 1) ? 512 : fw->size;
+		for (j = start; j < end; j += (packet_size+1)) {
+			fw_data = (u8 *)(fw->data + j);
+			if ((end - j) > packet_size) {
+				data[0] = i;
+				dlen = packet_size;
+			} else {
+				data[0] = i | 0x80;
+				dlen = (u8)(end - j)-1;
+			}
+			data[1] = dlen;
+			memcpy(&data[2], fw_data, dlen+1);
+			wlen = (u8) dlen + 4;
+			data[wlen-1] = check_sum(fw_data, dlen+1);
+			deb_info(1, "Data S=%02x:E=%02x CS= %02x", data[3],
+				data[dlen+2], data[dlen+3]);
+			lme2510_usb_talk(d, data, wlen, data, len_in);
+			ret |= (data[0] == 0x88) ? 0 : -1;
+		}
+	}
+
+	usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
+			0x06, 0x80, 0x0200, 0x00, data, 0x0109, 1000);
+
+
+	data[0] = 0x8a;
+	len_in = 1;
+	msleep(2000);
+	lme2510_usb_talk(d, data, len_in, data, len_in);
+	msleep(400);
+
+	if (ret < 0)
+		info("FRM Firmware Download Failed (%04x)" , ret);
+	else
+		info("FRM Firmware Download Completed - Resetting Device");
+
+	kfree(data);
+	return RECONNECTS_USB;
+}
+
+static void lme_coldreset(struct dvb_usb_device *d)
+{
+	u8 data[1] = {0};
+	data[0] = 0x0a;
+	info("FRM Firmware Cold Reset");
+
+	lme2510_usb_talk(d, data, sizeof(data), data, sizeof(data));
+
+	return;
+}
+
+static const char fw_c_s7395[] = LME2510_C_S7395;
+static const char fw_c_lg[] = LME2510_C_LG;
+static const char fw_c_s0194[] = LME2510_C_S0194;
+static const char fw_c_rs2000[] = LME2510_C_RS2000;
+static const char fw_lg[] = LME2510_LG;
+static const char fw_s0194[] = LME2510_S0194;
+
+const char *lme_firmware_switch(struct dvb_usb_device *d, int cold)
+{
+	struct lme2510_state *st = d->priv;
+	struct usb_device *udev = d->udev;
+	const struct firmware *fw = NULL;
+	const char *fw_lme;
+	int ret = 0;
+
+	cold = (cold > 0) ? (cold & 1) : 0;
+
+	switch (le16_to_cpu(udev->descriptor.idProduct)) {
+	case 0x1122:
+		switch (st->dvb_usb_lme2510_firmware) {
+		default:
+			st->dvb_usb_lme2510_firmware = TUNER_S0194;
+		case TUNER_S0194:
+			fw_lme = fw_s0194;
+			ret = request_firmware(&fw, fw_lme, &udev->dev);
+			if (ret == 0) {
+				cold = 0;
+				break;
+			}
+			st->dvb_usb_lme2510_firmware = TUNER_LG;
+		case TUNER_LG:
+			fw_lme = fw_lg;
+			ret = request_firmware(&fw, fw_lme, &udev->dev);
+			if (ret == 0)
+				break;
+			st->dvb_usb_lme2510_firmware = TUNER_DEFAULT;
+			break;
+		}
+		break;
+	case 0x1120:
+		switch (st->dvb_usb_lme2510_firmware) {
+		default:
+			st->dvb_usb_lme2510_firmware = TUNER_S7395;
+		case TUNER_S7395:
+			fw_lme = fw_c_s7395;
+			ret = request_firmware(&fw, fw_lme, &udev->dev);
+			if (ret == 0) {
+				cold = 0;
+				break;
+			}
+			st->dvb_usb_lme2510_firmware = TUNER_LG;
+		case TUNER_LG:
+			fw_lme = fw_c_lg;
+			ret = request_firmware(&fw, fw_lme, &udev->dev);
+			if (ret == 0)
+				break;
+			st->dvb_usb_lme2510_firmware = TUNER_S0194;
+		case TUNER_S0194:
+			fw_lme = fw_c_s0194;
+			ret = request_firmware(&fw, fw_lme, &udev->dev);
+			if (ret == 0)
+				break;
+			st->dvb_usb_lme2510_firmware = TUNER_DEFAULT;
+			cold = 0;
+			break;
+		}
+		break;
+	case 0x22f0:
+		fw_lme = fw_c_rs2000;
+		st->dvb_usb_lme2510_firmware = TUNER_RS2000;
+		break;
+	default:
+		fw_lme = fw_c_s7395;
+	}
+
+	release_firmware(fw);
+
+	if (cold) {
+		dvb_usb_lme2510_firmware = st->dvb_usb_lme2510_firmware;
+		info("FRM Changing to %s firmware", fw_lme);
+		lme_coldreset(d);
+		return NULL;
+	}
+
+	return fw_lme;
+}
+
+static int lme2510_kill_urb(struct usb_data_stream *stream)
+{
+	int i;
+
+	for (i = 0; i < stream->urbs_submitted; i++) {
+		deb_info(3, "killing URB no. %d.", i);
+		/* stop the URB */
+		usb_kill_urb(stream->urb_list[i]);
+	}
+	stream->urbs_submitted = 0;
+
+	return 0;
+}
+
+static struct tda10086_config tda10086_config = {
+	.demod_address = 0x1c,
+	.invert = 0,
+	.diseqc_tone = 1,
+	.xtal_freq = TDA10086_XTAL_16M,
+};
+
+static struct stv0288_config lme_config = {
+	.demod_address = 0xd0,
+	.min_delay_ms = 15,
+	.inittab = s7395_inittab,
+};
+
+static struct ix2505v_config lme_tuner = {
+	.tuner_address = 0xc0,
+	.min_delay_ms = 100,
+	.tuner_gain = 0x0,
+	.tuner_chargepump = 0x3,
+};
+
+static struct stv0299_config sharp_z0194_config = {
+	.demod_address = 0xd0,
+	.inittab = sharp_z0194a_inittab,
+	.mclk = 88000000UL,
+	.invert = 0,
+	.skip_reinit = 0,
+	.lock_output = STV0299_LOCKOUTPUT_1,
+	.volt13_op0_op1 = STV0299_VOLT13_OP1,
+	.min_delay_ms = 100,
+	.set_symbol_rate = sharp_z0194a_set_symbol_rate,
+};
+
+static int dm04_rs2000_set_ts_param(struct dvb_frontend *fe,
+	int caller)
+{
+	struct dvb_usb_adapter *adap = fe_to_adap(fe);
+	struct dvb_usb_device *d = adap_to_d(adap);
+	struct lme2510_state *st = d->priv;
+
+	mutex_lock(&d->i2c_mutex);
+	if ((st->i2c_talk_onoff == 1) && (st->stream_on & 1)) {
+		st->i2c_talk_onoff = 0;
+		lme2510_stream_restart(d);
+	}
+	mutex_unlock(&d->i2c_mutex);
+
+	return 0;
+}
+
+static struct m88rs2000_config m88rs2000_config = {
+	.demod_addr = 0xd0,
+	.tuner_addr = 0xc0,
+	.set_ts_params = dm04_rs2000_set_ts_param,
+};
+
+static int dm04_lme2510_set_voltage(struct dvb_frontend *fe,
+					fe_sec_voltage_t voltage)
+{
+	struct dvb_usb_device *d = fe_to_d(fe);
+	struct lme2510_state *st = fe_to_priv(fe);
+	static u8 voltage_low[] = LME_VOLTAGE_L;
+	static u8 voltage_high[] = LME_VOLTAGE_H;
+	static u8 rbuf[1];
+	int ret = 0, len = 3, rlen = 1;
+
+	mutex_lock(&d->i2c_mutex);
+
+	switch (voltage) {
+	case SEC_VOLTAGE_18:
+		ret |= lme2510_usb_talk(d,
+			voltage_high, len, rbuf, rlen);
+		break;
+
+	case SEC_VOLTAGE_OFF:
+	case SEC_VOLTAGE_13:
+	default:
+		ret |= lme2510_usb_talk(d,
+				voltage_low, len, rbuf, rlen);
+		break;
+	}
+
+	mutex_unlock(&d->i2c_mutex);
+
+	if (st->tuner_config == TUNER_RS2000)
+		if (st->fe_set_voltage)
+			st->fe_set_voltage(fe, voltage);
+
+
+	return (ret < 0) ? -ENODEV : 0;
+}
+
+static int dm04_rs2000_read_signal_strength(struct dvb_frontend *fe,
+	u16 *strength)
+{
+	struct lme2510_state *st = fe_to_priv(fe);
+
+	*strength = (u16)((u32)st->signal_level * 0xffff / 0xff);
+
+	return 0;
+}
+
+static int dm04_rs2000_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+	struct lme2510_state *st = fe_to_priv(fe);
+
+	*snr = (u16)((u32)st->signal_sn * 0xffff / 0x7f);
+
+	return 0;
+}
+
+static int dm04_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+	*ber = 0;
+
+	return 0;
+}
+
+static int dm04_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+	*ucblocks = 0;
+
+	return 0;
+}
+
+static int lme_name(struct dvb_usb_adapter *adap)
+{
+	struct dvb_usb_device *d = adap_to_d(adap);
+	struct lme2510_state *st = adap_to_priv(adap);
+	const char *desc = d->name;
+	char *fe_name[] = {"", " LG TDQY-P001F", " SHARP:BS2F7HZ7395",
+				" SHARP:BS2F7HZ0194", " RS2000"};
+	char *name = adap->fe[0]->ops.info.name;
+
+	strlcpy(name, desc, 128);
+	strlcat(name, fe_name[st->tuner_config], 128);
+
+	return 0;
+}
+
+static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dvb_usb_device *d = adap_to_d(adap);
+	struct lme2510_state *st = d->priv;
+	int ret = 0;
+
+	st->i2c_talk_onoff = 1;
+	switch (le16_to_cpu(d->udev->descriptor.idProduct)) {
+	case 0x1122:
+	case 0x1120:
+		st->i2c_gate = 4;
+		adap->fe[0] = dvb_attach(tda10086_attach,
+			&tda10086_config, &d->i2c_adap);
+		if (adap->fe[0]) {
+			info("TUN Found Frontend TDA10086");
+			st->i2c_tuner_gate_w = 4;
+			st->i2c_tuner_gate_r = 4;
+			st->i2c_tuner_addr = 0xc0;
+			st->tuner_config = TUNER_LG;
+			if (st->dvb_usb_lme2510_firmware != TUNER_LG) {
+				st->dvb_usb_lme2510_firmware = TUNER_LG;
+				ret = lme_firmware_switch(d, 1) ? 0 : -ENODEV;
+			}
+			break;
+		}
+
+		st->i2c_gate = 4;
+		adap->fe[0] = dvb_attach(stv0299_attach,
+				&sharp_z0194_config, &d->i2c_adap);
+		if (adap->fe[0]) {
+			info("FE Found Stv0299");
+			st->i2c_tuner_gate_w = 4;
+			st->i2c_tuner_gate_r = 5;
+			st->i2c_tuner_addr = 0xc0;
+			st->tuner_config = TUNER_S0194;
+			if (st->dvb_usb_lme2510_firmware != TUNER_S0194) {
+				st->dvb_usb_lme2510_firmware = TUNER_S0194;
+				ret = lme_firmware_switch(d, 1) ? 0 : -ENODEV;
+			}
+			break;
+		}
+
+		st->i2c_gate = 5;
+		adap->fe[0] = dvb_attach(stv0288_attach, &lme_config,
+			&d->i2c_adap);
+
+		if (adap->fe[0]) {
+			info("FE Found Stv0288");
+			st->i2c_tuner_gate_w = 4;
+			st->i2c_tuner_gate_r = 5;
+			st->i2c_tuner_addr = 0xc0;
+			st->tuner_config = TUNER_S7395;
+			if (st->dvb_usb_lme2510_firmware != TUNER_S7395) {
+				st->dvb_usb_lme2510_firmware = TUNER_S7395;
+				ret = lme_firmware_switch(d, 1) ? 0 : -ENODEV;
+			}
+			break;
+		}
+	case 0x22f0:
+		st->i2c_gate = 5;
+		adap->fe[0] = dvb_attach(m88rs2000_attach,
+			&m88rs2000_config, &d->i2c_adap);
+
+		if (adap->fe[0]) {
+			info("FE Found M88RS2000");
+			st->i2c_tuner_gate_w = 5;
+			st->i2c_tuner_gate_r = 5;
+			st->i2c_tuner_addr = 0xc0;
+			st->tuner_config = TUNER_RS2000;
+			st->fe_set_voltage =
+				adap->fe[0]->ops.set_voltage;
+
+			adap->fe[0]->ops.read_signal_strength =
+				dm04_rs2000_read_signal_strength;
+			adap->fe[0]->ops.read_snr =
+				dm04_rs2000_read_snr;
+			adap->fe[0]->ops.read_ber =
+				dm04_read_ber;
+			adap->fe[0]->ops.read_ucblocks =
+				dm04_read_ucblocks;
+		}
+		break;
+	}
+
+	if (adap->fe[0] == NULL) {
+		info("DM04/QQBOX Not Powered up or not Supported");
+		return -ENODEV;
+	}
+
+	if (ret) {
+		if (adap->fe[0]) {
+			dvb_frontend_detach(adap->fe[0]);
+			adap->fe[0] = NULL;
+		}
+		d->rc_map = NULL;
+		return -ENODEV;
+	}
+
+	adap->fe[0]->ops.set_voltage = dm04_lme2510_set_voltage;
+	ret = lme_name(adap);
+	return ret;
+}
+
+static int dm04_lme2510_tuner(struct dvb_usb_adapter *adap)
+{
+	struct dvb_usb_device *d = adap_to_d(adap);
+	struct lme2510_state *st = adap_to_priv(adap);
+	char *tun_msg[] = {"", "TDA8263", "IX2505V", "DVB_PLL_OPERA", "RS2000"};
+	int ret = 0;
+
+	switch (st->tuner_config) {
+	case TUNER_LG:
+		if (dvb_attach(tda826x_attach, adap->fe[0], 0xc0,
+			&d->i2c_adap, 1))
+			ret = st->tuner_config;
+		break;
+	case TUNER_S7395:
+		if (dvb_attach(ix2505v_attach , adap->fe[0], &lme_tuner,
+			&d->i2c_adap))
+			ret = st->tuner_config;
+		break;
+	case TUNER_S0194:
+		if (dvb_attach(dvb_pll_attach , adap->fe[0], 0xc0,
+			&d->i2c_adap, DVB_PLL_OPERA1))
+			ret = st->tuner_config;
+		break;
+	case TUNER_RS2000:
+		ret = st->tuner_config;
+		break;
+	default:
+		break;
+	}
+
+	if (ret)
+		info("TUN Found %s tuner", tun_msg[ret]);
+	else {
+		info("TUN No tuner found --- resetting device");
+		lme_coldreset(d);
+		return -ENODEV;
+	}
+
+	/* Start the Interrupt*/
+	ret = lme2510_int_read(adap);
+	if (ret < 0) {
+		info("INT Unable to start Interrupt Service");
+		return -ENODEV;
+	}
+
+	return ret;
+}
+
+static int lme2510_powerup(struct dvb_usb_device *d, int onoff)
+{
+	struct lme2510_state *st = d->priv;
+	static u8 lnb_on[] = LNB_ON;
+	static u8 lnb_off[] = LNB_OFF;
+	static u8 rbuf[1];
+	int ret = 0, len = 3, rlen = 1;
+
+	mutex_lock(&d->i2c_mutex);
+
+	if (onoff)
+		ret = lme2510_usb_talk(d, lnb_on, len, rbuf, rlen);
+	else
+		ret = lme2510_usb_talk(d, lnb_off, len, rbuf, rlen);
+
+	st->i2c_talk_onoff = 1;
+
+	mutex_unlock(&d->i2c_mutex);
+
+	return ret;
+}
+
+static int lme2510_get_adapter_count(struct dvb_usb_device *d)
+{
+	return 1;
+}
+
+static int lme2510_identify_state(struct dvb_usb_device *d, const char **name)
+{
+	struct lme2510_state *st = d->priv;
+
+	usb_reset_configuration(d->udev);
+
+	usb_set_interface(d->udev,
+		d->intf->cur_altsetting->desc.bInterfaceNumber, 1);
+
+	st->dvb_usb_lme2510_firmware = dvb_usb_lme2510_firmware;
+
+	if (lme2510_return_status(d) == 0x44) {
+		*name = lme_firmware_switch(d, 0);
+		return COLD;
+	}
+
+	return 0;
+}
+
+static int lme2510_get_stream_config(struct dvb_frontend *fe, u8 *ts_type,
+		struct usb_data_stream_properties *stream)
+{
+	struct dvb_usb_adapter *adap = fe_to_adap(fe);
+	struct dvb_usb_device *d = adap_to_d(adap);
+
+	if (adap == NULL)
+		return 0;
+	/* Turn PID filter on the fly by module option */
+	if (pid_filter == 2) {
+		adap->pid_filtering  = 1;
+		adap->max_feed_count = 15;
+	}
+
+	if (!(le16_to_cpu(d->udev->descriptor.idProduct)
+		== 0x1122))
+		stream->endpoint = 0x8;
+
+	return 0;
+}
+
+static int lme2510_get_rc_config(struct dvb_usb_device *d,
+	struct dvb_usb_rc *rc)
+{
+	rc->allowed_protos = RC_TYPE_NEC;
+	return 0;
+}
+
+static void *lme2510_exit_int(struct dvb_usb_device *d)
+{
+	struct lme2510_state *st = d->priv;
+	struct dvb_usb_adapter *adap = &d->adapter[0];
+	void *buffer = NULL;
+
+	if (adap != NULL) {
+		lme2510_kill_urb(&adap->stream);
+	}
+
+	if (st->usb_buffer != NULL) {
+		st->i2c_talk_onoff = 1;
+		st->signal_lock = 0;
+		st->signal_level = 0;
+		st->signal_sn = 0;
+		buffer = st->usb_buffer;
+	}
+
+	if (st->lme_urb != NULL) {
+		usb_kill_urb(st->lme_urb);
+		usb_free_coherent(d->udev, 128, st->buffer,
+				  st->lme_urb->transfer_dma);
+		info("Interrupt Service Stopped");
+	}
+
+	return buffer;
+}
+
+static void lme2510_exit(struct dvb_usb_device *d)
+{
+	void *usb_buffer;
+
+	if (d != NULL) {
+		usb_buffer = lme2510_exit_int(d);
+		if (usb_buffer != NULL)
+			kfree(usb_buffer);
+	}
+}
+
+static struct dvb_usb_device_properties lme2510_props = {
+	.driver_name = KBUILD_MODNAME,
+	.owner = THIS_MODULE,
+	.bInterfaceNumber = 0,
+	.adapter_nr = adapter_nr,
+	.size_of_priv = sizeof(struct lme2510_state),
+
+	.download_firmware = lme2510_download_firmware,
+
+	.power_ctrl       = lme2510_powerup,
+	.identify_state   = lme2510_identify_state,
+	.i2c_algo         = &lme2510_i2c_algo,
+
+	.frontend_attach  = dm04_lme2510_frontend_attach,
+	.tuner_attach = dm04_lme2510_tuner,
+	.get_stream_config = lme2510_get_stream_config,
+	.get_adapter_count = lme2510_get_adapter_count,
+	.streaming_ctrl   = lme2510_streaming_ctrl,
+
+	.get_rc_config = lme2510_get_rc_config,
+
+	.exit = lme2510_exit,
+	.adapter = {
+		{
+			.caps = DVB_USB_ADAP_HAS_PID_FILTER|
+				DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+			.pid_filter_count = 15,
+			.pid_filter = lme2510_pid_filter,
+			.pid_filter_ctrl  = lme2510_pid_filter_ctrl,
+			.stream =
+			DVB_USB_STREAM_BULK(0x86, 10, 4096),
+		},
+		{
+		}
+	},
+};
+
+static const struct usb_device_id lme2510_id_table[] = {
+	{	DVB_USB_DEVICE(0x3344, 0x1122, &lme2510_props,
+		"DM04_LME2510_DVB-S", RC_MAP_LME2510)	},
+	{	DVB_USB_DEVICE(0x3344, 0x1120, &lme2510_props,
+		"DM04_LME2510C_DVB-S", RC_MAP_LME2510)	},
+	{	DVB_USB_DEVICE(0x3344, 0x22f0, &lme2510_props,
+		"DM04_LME2510C_DVB-S RS2000", RC_MAP_LME2510)	},
+	{}		/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, lme2510_id_table);
+
+static struct usb_driver lme2510_driver = {
+	.name		= KBUILD_MODNAME,
+	.probe		= dvb_usbv2_probe,
+	.disconnect	= dvb_usbv2_disconnect,
+	.id_table	= lme2510_id_table,
+	.no_dynamic_id = 1,
+	.soft_unbind = 1,
+};
+
+module_usb_driver(lme2510_driver);
+
+MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
+MODULE_DESCRIPTION("LME2510(C) DVB-S USB2.0");
+MODULE_VERSION("2.06");
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(LME2510_C_S7395);
+MODULE_FIRMWARE(LME2510_C_LG);
+MODULE_FIRMWARE(LME2510_C_S0194);
+MODULE_FIRMWARE(LME2510_C_RS2000);
+MODULE_FIRMWARE(LME2510_LG);
+MODULE_FIRMWARE(LME2510_S0194);
+
diff --git a/drivers/media/dvb/dvb-usb-v2/lmedm04.h b/drivers/media/dvb/dvb-usb-v2/lmedm04.h
new file mode 100644
index 000000000000..e9c207205c2f
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb-v2/lmedm04.h
@@ -0,0 +1,175 @@
+/* DVB USB compliant linux driver for
+ *
+ * DM04/QQBOX DVB-S USB BOX	LME2510C + SHARP:BS2F7HZ7395
+ *				LME2510C + LG TDQY-P001F
+ *				LME2510 + LG TDQY-P001F
+ *
+ * MVB7395 (LME2510C+SHARP:BS2F7HZ7395)
+ * SHARP:BS2F7HZ7395 = (STV0288+Sharp IX2505V)
+ *
+ * MVB001F (LME2510+LGTDQT-P001F)
+ * LG TDQY - P001F =(TDA8263 + TDA10086H)
+ *
+ * MVB0001F (LME2510C+LGTDQT-P001F)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation,  version 2.
+ * *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#ifndef _DVB_USB_LME2510_H_
+#define _DVB_USB_LME2510_H_
+
+/* Streamer &  PID
+ *
+ * Note:	These commands do not actually stop the streaming
+ *		but form some kind of packet filtering/stream count
+ *		or tuning related functions.
+ *  06 XX
+ *  offset 1 = 00 Enable Streaming
+ *
+ *
+ *  PID
+ *  03 XX XX  ----> reg number ---> setting....20 XX
+ *  offset 1 = length
+ *  offset 2 = start of data
+ *  end byte -1 = 20
+ *  end byte = clear pid always a0, other wise 9c, 9a ??
+ *
+*/
+#define LME_ST_ON_W	{0x06, 0x00}
+#define LME_CLEAR_PID   {0x03, 0x02, 0x20, 0xa0}
+#define LME_ZERO_PID	{0x03, 0x06, 0x00, 0x00, 0x01, 0x00, 0x20, 0x9c}
+#define LME_ALL_PIDS	{0x03, 0x06, 0x00, 0xff, 0x01, 0x1f, 0x20, 0x81}
+
+/*  LNB Voltage
+ *  07 XX XX
+ *  offset 1 = 01
+ *  offset 2 = 00=Voltage low 01=Voltage high
+ *
+ *  LNB Power
+ *  03 01 XX
+ *  offset 2 = 00=ON 01=OFF
+ */
+
+#define LME_VOLTAGE_L	{0x07, 0x01, 0x00}
+#define LME_VOLTAGE_H	{0x07, 0x01, 0x01}
+#define LNB_ON		{0x3a, 0x01, 0x00}
+#define LNB_OFF		{0x3a, 0x01, 0x01}
+
+/* Initial stv0288 settings for 7395 Frontend */
+static u8 s7395_inittab[] = {
+	0x01, 0x15,
+	0x02, 0x20,
+	0x03, 0xa0,
+	0x04, 0xa0,
+	0x05, 0x12,
+	0x06, 0x00,
+	0x09, 0x00,
+	0x0a, 0x04,
+	0x0b, 0x00,
+	0x0c, 0x00,
+	0x0d, 0x00,
+	0x0e, 0xc1,
+	0x0f, 0x54,
+	0x11, 0x7a,
+	0x12, 0x03,
+	0x13, 0x48,
+	0x14, 0x84,
+	0x15, 0xc5,
+	0x16, 0xb8,
+	0x17, 0x9c,
+	0x18, 0x00,
+	0x19, 0xa6,
+	0x1a, 0x88,
+	0x1b, 0x8f,
+	0x1c, 0xf0,
+	0x20, 0x0b,
+	0x21, 0x54,
+	0x22, 0xff,
+	0x23, 0x01,
+	0x28, 0x46,
+	0x29, 0x66,
+	0x2a, 0x90,
+	0x2b, 0xfa,
+	0x2c, 0xd9,
+	0x30, 0x0,
+	0x31, 0x1e,
+	0x32, 0x14,
+	0x33, 0x0f,
+	0x34, 0x09,
+	0x35, 0x0c,
+	0x36, 0x05,
+	0x37, 0x2f,
+	0x38, 0x16,
+	0x39, 0xbd,
+	0x3a, 0x0,
+	0x3b, 0x13,
+	0x3c, 0x11,
+	0x3d, 0x30,
+	0x40, 0x63,
+	0x41, 0x04,
+	0x42, 0x20,
+	0x43, 0x00,
+	0x44, 0x00,
+	0x45, 0x00,
+	0x46, 0x00,
+	0x47, 0x00,
+	0x4a, 0x00,
+	0x50, 0x10,
+	0x51, 0x36,
+	0x52, 0x21,
+	0x53, 0x94,
+	0x54, 0xb2,
+	0x55, 0x29,
+	0x56, 0x64,
+	0x57, 0x2b,
+	0x58, 0x54,
+	0x59, 0x86,
+	0x5a, 0x00,
+	0x5b, 0x9b,
+	0x5c, 0x08,
+	0x5d, 0x7f,
+	0x5e, 0xff,
+	0x5f, 0x8d,
+	0x70, 0x0,
+	0x71, 0x0,
+	0x72, 0x0,
+	0x74, 0x0,
+	0x75, 0x0,
+	0x76, 0x0,
+	0x81, 0x0,
+	0x82, 0x3f,
+	0x83, 0x3f,
+	0x84, 0x0,
+	0x85, 0x0,
+	0x88, 0x0,
+	0x89, 0x0,
+	0x8a, 0x0,
+	0x8b, 0x0,
+	0x8c, 0x0,
+	0x90, 0x0,
+	0x91, 0x0,
+	0x92, 0x0,
+	0x93, 0x0,
+	0x94, 0x1c,
+	0x97, 0x0,
+	0xa0, 0x48,
+	0xa1, 0x0,
+	0xb0, 0xb8,
+	0xb1, 0x3a,
+	0xb2, 0x10,
+	0xb3, 0x82,
+	0xb4, 0x80,
+	0xb5, 0x82,
+	0xb6, 0x82,
+	0xb7, 0x82,
+	0xb8, 0x20,
+	0xb9, 0x0,
+	0xf0, 0x0,
+	0xf1, 0x0,
+	0xf2, 0xc0,
+	0xff, 0xff,
+};
+#endif