V4L/DVB (4029): [PATCH] Genpix 8PSK->USB driver (Take 2)

This is a patch which includes support for the GENPIX 8PSK->USB module.  The
board supports QPSK, BPSK and 8PSK decoding (though I don't think it will be
DVB-S2 compliant) With the following patch, the boad is equivalent to a budget
card (no CA Module)
The patch which adds 8psk suppot will follow, but is seperate, as it requires
DVB-S2 support
More info on the board can be found at www.genpix-electronics.com (and they
host the requisite firmwares there as well)
Signed off by: Alan Nisota <alannisota@gmail.com>

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

1 files changed, 254 insertions, 0 deletions

diff --git a/drivers/media/dvb/dvb-usb/gp8psk.c b/drivers/media/dvb/dvb-usb/gp8psk.c
new file mode 100644
index 000000000000..d6771cbd262d
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/gp8psk.c
@@ -0,0 +1,254 @@
+/* DVB USB compliant Linux driver for the
+ *  - GENPIX 8pks/qpsk USB2.0 DVB-S module
+ *
+ * Copyright (C) 2006 Alan Nisota (alannisota@gmail.com)
+ *
+ * Thanks to GENPIX for the sample code used to implement this module.
+ *
+ * This module is based off the vp7045 and vp702x modules
+ *
+ *	This program is free software; you can redistribute it and/or modify it
+ *	under the terms of the GNU General Public License as published by the Free
+ *	Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#include "gp8psk.h"
+
+/* debug */
+static char bcm4500_firmware[] = "dvb-usb-gp8psk-02.fw";
+int dvb_usb_gp8psk_debug;
+module_param_named(debug,dvb_usb_gp8psk_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS);
+
+int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen)
+{
+	int ret = 0,try = 0;
+
+	if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
+		return ret;
+
+	while (ret >= 0 && ret != blen && try < 3) {
+		ret = usb_control_msg(d->udev,
+			usb_rcvctrlpipe(d->udev,0),
+			req,
+			USB_TYPE_VENDOR | USB_DIR_IN,
+			value,index,b,blen,
+			2000);
+		deb_info("reading number %d (ret: %d)\n",try,ret);
+		try++;
+	}
+
+	if (ret < 0 || ret != blen) {
+		warn("usb in operation failed.");
+		ret = -EIO;
+	} else
+		ret = 0;
+
+	deb_xfer("in: req. %x, val: %x, ind: %x, buffer: ",req,value,index);
+	debug_dump(b,blen,deb_xfer);
+
+	mutex_unlock(&d->usb_mutex);
+
+	return ret;
+}
+
+int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
+			     u16 index, u8 *b, int blen)
+{
+	int ret;
+
+	deb_xfer("out: req. %x, val: %x, ind: %x, buffer: ",req,value,index);
+	debug_dump(b,blen,deb_xfer);
+
+	if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
+		return ret;
+
+	if (usb_control_msg(d->udev,
+			usb_sndctrlpipe(d->udev,0),
+			req,
+			USB_TYPE_VENDOR | USB_DIR_OUT,
+			value,index,b,blen,
+			2000) != blen) {
+		warn("usb out operation failed.");
+		ret = -EIO;
+	} else
+		ret = 0;
+	mutex_unlock(&d->usb_mutex);
+
+	return ret;
+}
+
+static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d)
+{
+	int ret;
+	const struct firmware *fw = NULL;
+	u8 *ptr, *buf;
+	if ((ret = request_firmware(&fw, bcm4500_firmware,
+					&d->udev->dev)) != 0) {
+		err("did not find the bcm4500 firmware file. (%s) "
+			"Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)",
+			bcm4500_firmware,ret);
+		return ret;
+	}
+
+	if (gp8psk_usb_out_op(d, LOAD_BCM4500,1,0,NULL, 0)) {
+		release_firmware(fw);
+		return -EINVAL;
+	}
+
+	info("downloaidng bcm4500 firmware from file '%s'",bcm4500_firmware);
+
+	ptr = fw->data;
+	buf = (u8 *) kmalloc(512, GFP_KERNEL | GFP_DMA);
+
+	while (ptr[0] != 0xff) {
+		u16 buflen = ptr[0] + 4;
+		if (ptr + buflen >= fw->data + fw->size) {
+			err("failed to load bcm4500 firmware.");
+			release_firmware(fw);
+			kfree(buf);
+			return -EINVAL;
+		}
+		memcpy(buf, ptr, buflen);
+		if (dvb_usb_generic_write(d, buf, buflen)) {
+			err("failed to load bcm4500 firmware.");
+			release_firmware(fw);
+			kfree(buf);
+			return -EIO;
+		}
+		ptr += buflen;
+	}
+	release_firmware(fw);
+	kfree(buf);
+	return 0;
+}
+
+static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+	u8 status, buf;
+	if (onoff) {
+		gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1);
+		if (! (status & 0x01))  /* started */
+			if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1))
+				return -EINVAL;
+
+		if (! (status & 0x02)) /* BCM4500 firmware loaded */
+			if(gp8psk_load_bcm4500fw(d))
+				return EINVAL;
+
+		if (! (status & 0x04)) /* LNB Power */
+			if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0,
+					&buf, 1))
+				return EINVAL;
+
+		/* Set DVB mode */
+		if(gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0))
+			return -EINVAL;
+		gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1);
+	} else {
+		/* Turn off LNB power */
+		if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1))
+			return EINVAL;
+		/* Turn off 8psk power */
+		if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1))
+			return -EINVAL;
+
+	}
+	return 0;
+}
+
+
+static int gp8psk_streaming_ctrl(struct dvb_usb_device *d, int onoff)
+{
+	return gp8psk_usb_out_op(d, ARM_TRANSFER, onoff, 0 , NULL, 0);
+}
+
+static int gp8psk_frontend_attach(struct dvb_usb_device *d)
+{
+	d->fe = gp8psk_fe_attach(d);
+
+	return 0;
+}
+
+static struct dvb_usb_properties gp8psk_properties;
+
+static int gp8psk_usb_probe(struct usb_interface *intf,
+		const struct usb_device_id *id)
+{
+	return dvb_usb_device_init(intf,&gp8psk_properties,THIS_MODULE,NULL);
+}
+
+static struct usb_device_id gp8psk_usb_table [] = {
+	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_COLD) },
+	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_WARM) },
+	    { 0 },
+};
+MODULE_DEVICE_TABLE(usb, gp8psk_usb_table);
+
+static struct dvb_usb_properties gp8psk_properties = {
+	.caps = 0,
+
+	.usb_ctrl = CYPRESS_FX2,
+	.firmware = "dvb-usb-gp8psk-01.fw",
+
+	.streaming_ctrl   = gp8psk_streaming_ctrl,
+	.power_ctrl       = gp8psk_power_ctrl,
+	.frontend_attach  = gp8psk_frontend_attach,
+
+	.generic_bulk_ctrl_endpoint = 0x01,
+	/* parameter for the MPEG2-data transfer */
+	.urb = {
+		.type = DVB_USB_BULK,
+		.count = 7,
+		.endpoint = 0x82,
+		.u = {
+			.bulk = {
+				.buffersize = 8192,
+			}
+		}
+	},
+
+	.num_device_descs = 1,
+	.devices = {
+		{ .name = "Genpix 8PSK-USB DVB-S USB2.0 receiver",
+		  .cold_ids = { &gp8psk_usb_table[0], NULL },
+		  .warm_ids = { &gp8psk_usb_table[1], NULL },
+		},
+		{ 0 },
+	}
+};
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver gp8psk_usb_driver = {
+	.name		= "dvb_usb_gp8psk",
+	.probe		= gp8psk_usb_probe,
+	.disconnect = dvb_usb_device_exit,
+	.id_table	= gp8psk_usb_table,
+};
+
+/* module stuff */
+static int __init gp8psk_usb_module_init(void)
+{
+	int result;
+	if ((result = usb_register(&gp8psk_usb_driver))) {
+		err("usb_register failed. (%d)",result);
+		return result;
+	}
+
+	return 0;
+}
+
+static void __exit gp8psk_usb_module_exit(void)
+{
+	/* deregister this driver from the USB subsystem */
+	usb_deregister(&gp8psk_usb_driver);
+}
+
+module_init(gp8psk_usb_module_init);
+module_exit(gp8psk_usb_module_exit);
+
+MODULE_AUTHOR("Alan Nisota <alannisota@gamil.com>");
+MODULE_DESCRIPTION("Driver for Genpix 8psk-USB DVB-S USB2.0");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL");