summaryrefslogtreecommitdiff
path: root/drivers/media/radio
diff options
context:
space:
mode:
authorMauro Carvalho Chehab <mchehab@infradead.org>2006-08-08 15:47:31 -0300
committerMauro Carvalho Chehab <mchehab@infradead.org>2006-08-08 15:52:52 -0300
commit7fb6529762f8185f792ad74adcf211713f973c80 (patch)
treec6dd9bb2f151561e795977366669df55faf8eafb /drivers/media/radio
parent0dfa9abd6bd153364da8cb131db0d0404ab15ad1 (diff)
V4L/DVB (4407): Driver dsbr100 is a radio device, not a video one!
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Diffstat (limited to 'drivers/media/radio')
-rw-r--r--drivers/media/radio/Kconfig12
-rw-r--r--drivers/media/radio/Makefile1
-rw-r--r--drivers/media/radio/dsbr100.c430
3 files changed, 442 insertions, 1 deletions
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index de3128a31de8..220076b1b956 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -350,5 +350,15 @@ config RADIO_ZOLTRIX_PORT
help
Enter the I/O port of your Zoltrix radio card.
-endmenu
+config USB_DSBR
+ tristate "D-Link USB FM radio support (EXPERIMENTAL)"
+ depends on USB && VIDEO_V4L1 && EXPERIMENTAL
+ ---help---
+ Say Y here if you want to connect this type of radio to your
+ computer's USB port. Note that the audio is not digital, and
+ you must connect the line out connector to a sound card or a
+ set of speakers.
+ To compile this driver as a module, choose M here: the
+ module will be called dsbr100.
+endmenu
diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile
index e95b6805e002..cf55a18e3ddf 100644
--- a/drivers/media/radio/Makefile
+++ b/drivers/media/radio/Makefile
@@ -20,5 +20,6 @@ obj-$(CONFIG_RADIO_GEMTEK) += radio-gemtek.o
obj-$(CONFIG_RADIO_GEMTEK_PCI) += radio-gemtek-pci.o
obj-$(CONFIG_RADIO_TRUST) += radio-trust.o
obj-$(CONFIG_RADIO_MAESTRO) += radio-maestro.o
+obj-$(CONFIG_USB_DSBR) += dsbr100.o
EXTRA_CFLAGS += -Isound
diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c
new file mode 100644
index 000000000000..f7e33f9ee8e9
--- /dev/null
+++ b/drivers/media/radio/dsbr100.c
@@ -0,0 +1,430 @@
+/* A driver for the D-Link DSB-R100 USB radio. The R100 plugs
+ into both the USB and an analog audio input, so this thing
+ only deals with initialisation and frequency setting, the
+ audio data has to be handled by a sound driver.
+
+ Major issue: I can't find out where the device reports the signal
+ strength, and indeed the windows software appearantly just looks
+ at the stereo indicator as well. So, scanning will only find
+ stereo stations. Sad, but I can't help it.
+
+ Also, the windows program sends oodles of messages over to the
+ device, and I couldn't figure out their meaning. My suspicion
+ is that they don't have any:-)
+
+ You might find some interesting stuff about this module at
+ http://unimut.fsk.uni-heidelberg.de/unimut/demi/dsbr
+
+ Copyright (c) 2000 Markus Demleitner <msdemlei@cl.uni-heidelberg.de>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+ History:
+
+ Version 0.40:
+ Markus: Updates for 2.6.x kernels, code layout changes, name sanitizing
+
+ Version 0.30:
+ Markus: Updates for 2.5.x kernel and more ISO compliant source
+
+ Version 0.25:
+ PSL and Markus: Cleanup, radio now doesn't stop on device close
+
+ Version 0.24:
+ Markus: Hope I got these silly VIDEO_TUNER_LOW issues finally
+ right. Some minor cleanup, improved standalone compilation
+
+ Version 0.23:
+ Markus: Sign extension bug fixed by declaring transfer_buffer unsigned
+
+ Version 0.22:
+ Markus: Some (brown bag) cleanup in what VIDIOCSTUNER returns,
+ thanks to Mike Cox for pointing the problem out.
+
+ Version 0.21:
+ Markus: Minor cleanup, warnings if something goes wrong, lame attempt
+ to adhere to Documentation/CodingStyle
+
+ Version 0.2:
+ Brad Hards <bradh@dynamite.com.au>: Fixes to make it work as non-module
+ Markus: Copyright clarification
+
+ Version 0.01: Markus: initial release
+
+*/
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/videodev.h>
+#include <media/v4l2-common.h>
+#include <linux/usb.h>
+#include <linux/smp_lock.h>
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v0.40"
+#define DRIVER_AUTHOR "Markus Demleitner <msdemlei@tucana.harvard.edu>"
+#define DRIVER_DESC "D-Link DSB-R100 USB FM radio driver"
+
+#define DSB100_VENDOR 0x04b4
+#define DSB100_PRODUCT 0x1002
+
+/* Commands the device appears to understand */
+#define DSB100_TUNE 1
+#define DSB100_ONOFF 2
+
+#define TB_LEN 16
+
+/* Frequency limits in MHz -- these are European values. For Japanese
+devices, that would be 76 and 91. */
+#define FREQ_MIN 87.5
+#define FREQ_MAX 108.0
+#define FREQ_MUL 16000
+
+
+static int usb_dsbr100_probe(struct usb_interface *intf,
+ const struct usb_device_id *id);
+static void usb_dsbr100_disconnect(struct usb_interface *intf);
+static int usb_dsbr100_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg);
+static int usb_dsbr100_open(struct inode *inode, struct file *file);
+static int usb_dsbr100_close(struct inode *inode, struct file *file);
+
+static int radio_nr = -1;
+module_param(radio_nr, int, 0);
+
+/* Data for one (physical) device */
+typedef struct {
+ struct usb_device *usbdev;
+ struct video_device *videodev;
+ unsigned char transfer_buffer[TB_LEN];
+ int curfreq;
+ int stereo;
+ int users;
+ int removed;
+} dsbr100_device;
+
+
+/* File system interface */
+static struct file_operations usb_dsbr100_fops = {
+ .owner = THIS_MODULE,
+ .open = usb_dsbr100_open,
+ .release = usb_dsbr100_close,
+ .ioctl = usb_dsbr100_ioctl,
+ .compat_ioctl = v4l_compat_ioctl32,
+ .llseek = no_llseek,
+};
+
+/* V4L interface */
+static struct video_device dsbr100_videodev_template=
+{
+ .owner = THIS_MODULE,
+ .name = "D-Link DSB-R 100",
+ .type = VID_TYPE_TUNER,
+ .hardware = VID_HARDWARE_AZTECH,
+ .fops = &usb_dsbr100_fops,
+ .release = video_device_release,
+};
+
+static struct usb_device_id usb_dsbr100_device_table [] = {
+ { USB_DEVICE(DSB100_VENDOR, DSB100_PRODUCT) },
+ { } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE (usb, usb_dsbr100_device_table);
+
+/* USB subsystem interface */
+static struct usb_driver usb_dsbr100_driver = {
+ .name = "dsbr100",
+ .probe = usb_dsbr100_probe,
+ .disconnect = usb_dsbr100_disconnect,
+ .id_table = usb_dsbr100_device_table,
+};
+
+/* Low-level device interface begins here */
+
+/* switch on radio */
+static int dsbr100_start(dsbr100_device *radio)
+{
+ if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+ USB_REQ_GET_STATUS,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ 0x00, 0xC7, radio->transfer_buffer, 8, 300)<0 ||
+ usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+ DSB100_ONOFF,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ 0x01, 0x00, radio->transfer_buffer, 8, 300)<0)
+ return -1;
+ return (radio->transfer_buffer)[0];
+}
+
+
+/* switch off radio */
+static int dsbr100_stop(dsbr100_device *radio)
+{
+ if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+ USB_REQ_GET_STATUS,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ 0x16, 0x1C, radio->transfer_buffer, 8, 300)<0 ||
+ usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+ DSB100_ONOFF,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ 0x00, 0x00, radio->transfer_buffer, 8, 300)<0)
+ return -1;
+ return (radio->transfer_buffer)[0];
+}
+
+/* set a frequency, freq is defined by v4l's TUNER_LOW, i.e. 1/16th kHz */
+static int dsbr100_setfreq(dsbr100_device *radio, int freq)
+{
+ freq = (freq/16*80)/1000+856;
+ if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+ DSB100_TUNE,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ (freq>>8)&0x00ff, freq&0xff,
+ radio->transfer_buffer, 8, 300)<0 ||
+ usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+ USB_REQ_GET_STATUS,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ 0x96, 0xB7, radio->transfer_buffer, 8, 300)<0 ||
+ usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+ USB_REQ_GET_STATUS,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ 0x00, 0x24, radio->transfer_buffer, 8, 300)<0) {
+ radio->stereo = -1;
+ return -1;
+ }
+ radio->stereo = ! ((radio->transfer_buffer)[0]&0x01);
+ return (radio->transfer_buffer)[0];
+}
+
+/* return the device status. This is, in effect, just whether it
+sees a stereo signal or not. Pity. */
+static void dsbr100_getstat(dsbr100_device *radio)
+{
+ if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+ USB_REQ_GET_STATUS,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ 0x00 , 0x24, radio->transfer_buffer, 8, 300)<0)
+ radio->stereo = -1;
+ else
+ radio->stereo = ! (radio->transfer_buffer[0]&0x01);
+}
+
+
+/* USB subsystem interface begins here */
+
+/* check if the device is present and register with v4l and
+usb if it is */
+static int usb_dsbr100_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ dsbr100_device *radio;
+
+ if (!(radio = kmalloc(sizeof(dsbr100_device), GFP_KERNEL)))
+ return -ENOMEM;
+ if (!(radio->videodev = video_device_alloc())) {
+ kfree(radio);
+ return -ENOMEM;
+ }
+ memcpy(radio->videodev, &dsbr100_videodev_template,
+ sizeof(dsbr100_videodev_template));
+ radio->removed = 0;
+ radio->users = 0;
+ radio->usbdev = interface_to_usbdev(intf);
+ radio->curfreq = FREQ_MIN*FREQ_MUL;
+ video_set_drvdata(radio->videodev, radio);
+ if (video_register_device(radio->videodev, VFL_TYPE_RADIO,
+ radio_nr)) {
+ warn("Could not register video device");
+ video_device_release(radio->videodev);
+ kfree(radio);
+ return -EIO;
+ }
+ usb_set_intfdata(intf, radio);
+ return 0;
+}
+
+/* handle unplugging of the device, release data structures
+if nothing keeps us from doing it. If something is still
+keeping us busy, the release callback of v4l will take care
+of releasing it. stv680.c does not relase its private
+data, so I don't do this here either. Checking out the
+code I'd expect I better did that, but if there's a memory
+leak here it's tiny (~50 bytes per disconnect) */
+static void usb_dsbr100_disconnect(struct usb_interface *intf)
+{
+ dsbr100_device *radio = usb_get_intfdata(intf);
+
+ usb_set_intfdata (intf, NULL);
+ if (radio) {
+ video_unregister_device(radio->videodev);
+ radio->videodev = NULL;
+ if (radio->users) {
+ kfree(radio);
+ } else {
+ radio->removed = 1;
+ }
+ }
+}
+
+
+/* Video for Linux interface */
+
+static int usb_dsbr100_do_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, void *arg)
+{
+ dsbr100_device *radio=video_get_drvdata(video_devdata(file));
+
+ if (!radio)
+ return -EIO;
+
+ switch(cmd) {
+ case VIDIOCGCAP: {
+ struct video_capability *v = arg;
+
+ memset(v, 0, sizeof(*v));
+ v->type = VID_TYPE_TUNER;
+ v->channels = 1;
+ v->audios = 1;
+ strcpy(v->name, "D-Link R-100 USB FM Radio");
+ return 0;
+ }
+ case VIDIOCGTUNER: {
+ struct video_tuner *v = arg;
+
+ dsbr100_getstat(radio);
+ if(v->tuner) /* Only 1 tuner */
+ return -EINVAL;
+ v->rangelow = FREQ_MIN*FREQ_MUL;
+ v->rangehigh = FREQ_MAX*FREQ_MUL;
+ v->flags = VIDEO_TUNER_LOW;
+ v->mode = VIDEO_MODE_AUTO;
+ v->signal = radio->stereo*0x7000;
+ /* Don't know how to get signal strength */
+ v->flags |= VIDEO_TUNER_STEREO_ON*radio->stereo;
+ strcpy(v->name, "DSB R-100");
+ return 0;
+ }
+ case VIDIOCSTUNER: {
+ struct video_tuner *v = arg;
+
+ if(v->tuner!=0)
+ return -EINVAL;
+ /* Only 1 tuner so no setting needed ! */
+ return 0;
+ }
+ case VIDIOCGFREQ: {
+ int *freq = arg;
+
+ if (radio->curfreq==-1)
+ return -EINVAL;
+ *freq = radio->curfreq;
+ return 0;
+ }
+ case VIDIOCSFREQ: {
+ int *freq = arg;
+
+ radio->curfreq = *freq;
+ if (dsbr100_setfreq(radio, radio->curfreq)==-1)
+ warn("Set frequency failed");
+ return 0;
+ }
+ case VIDIOCGAUDIO: {
+ struct video_audio *v = arg;
+
+ memset(v, 0, sizeof(*v));
+ v->flags |= VIDEO_AUDIO_MUTABLE;
+ v->mode = VIDEO_SOUND_STEREO;
+ v->volume = 1;
+ v->step = 1;
+ strcpy(v->name, "Radio");
+ return 0;
+ }
+ case VIDIOCSAUDIO: {
+ struct video_audio *v = arg;
+
+ if (v->audio)
+ return -EINVAL;
+ if (v->flags&VIDEO_AUDIO_MUTE) {
+ if (dsbr100_stop(radio)==-1)
+ warn("Radio did not respond properly");
+ }
+ else
+ if (dsbr100_start(radio)==-1)
+ warn("Radio did not respond properly");
+ return 0;
+ }
+ default:
+ return -ENOIOCTLCMD;
+ }
+}
+
+static int usb_dsbr100_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ return video_usercopy(inode, file, cmd, arg, usb_dsbr100_do_ioctl);
+}
+
+static int usb_dsbr100_open(struct inode *inode, struct file *file)
+{
+ dsbr100_device *radio=video_get_drvdata(video_devdata(file));
+
+ radio->users = 1;
+ if (dsbr100_start(radio)<0) {
+ warn("Radio did not start up properly");
+ radio->users = 0;
+ return -EIO;
+ }
+ dsbr100_setfreq(radio, radio->curfreq);
+ return 0;
+}
+
+static int usb_dsbr100_close(struct inode *inode, struct file *file)
+{
+ dsbr100_device *radio=video_get_drvdata(video_devdata(file));
+
+ if (!radio)
+ return -ENODEV;
+ radio->users = 0;
+ if (radio->removed) {
+ kfree(radio);
+ }
+ return 0;
+}
+
+static int __init dsbr100_init(void)
+{
+ int retval = usb_register(&usb_dsbr100_driver);
+ info(DRIVER_VERSION ":" DRIVER_DESC);
+ return retval;
+}
+
+static void __exit dsbr100_exit(void)
+{
+ usb_deregister(&usb_dsbr100_driver);
+}
+
+module_init (dsbr100_init);
+module_exit (dsbr100_exit);
+
+MODULE_AUTHOR( DRIVER_AUTHOR );
+MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_LICENSE("GPL");