V4L/DVB (7673): cx23885: Add support for the Hauppauge HVR1400

DVB-T mode is now supported using the DiBcom dib7000p demodulator
and the Xceive xc3028L silicon tuner. Analog mode is not supported.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Reviewed-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

1 files changed, 113 insertions, 0 deletions

diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 1b9a85e43d44..870d6e197d65 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -40,6 +40,8 @@
 #include "dvb-pll.h"
 #include "tuner-xc2028.h"
 #include "tuner-simple.h"
+#include "dib7000p.h"
+#include "dibx000_common.h"
 
 static unsigned int debug;
 
@@ -189,6 +191,92 @@ static struct tda18271_config hauppauge_hvr1200_tuner_config = {
 	.gate    = TDA18271_GATE_ANALOG,
 };
 
+struct dibx000_agc_config xc3028_agc_config = {
+	BAND_VHF | BAND_UHF,	/* band_caps */
+
+	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0,
+	 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+	 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0,
+	 * P_agc_nb_est=2, P_agc_write=0
+	 */
+	(0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) |
+		(3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */
+
+	712,	/* inv_gain */
+	21,	/* time_stabiliz */
+
+	0,	/* alpha_level */
+	118,	/* thlock */
+
+	0,	/* wbd_inv */
+	2867,	/* wbd_ref */
+	0,	/* wbd_sel */
+	2,	/* wbd_alpha */
+
+	0,	/* agc1_max */
+	0,	/* agc1_min */
+	39718,	/* agc2_max */
+	9930,	/* agc2_min */
+	0,	/* agc1_pt1 */
+	0,	/* agc1_pt2 */
+	0,	/* agc1_pt3 */
+	0,	/* agc1_slope1 */
+	0,	/* agc1_slope2 */
+	0,	/* agc2_pt1 */
+	128,	/* agc2_pt2 */
+	29,	/* agc2_slope1 */
+	29,	/* agc2_slope2 */
+
+	17,	/* alpha_mant */
+	27,	/* alpha_exp */
+	23,	/* beta_mant */
+	51,	/* beta_exp */
+
+	1,	/* perform_agc_softsplit */
+};
+
+/* PLL Configuration for COFDM BW_MHz = 8.000000
+ * With external clock = 30.000000 */
+struct dibx000_bandwidth_config xc3028_bw_config = {
+	60000,	/* internal */
+	30000,	/* sampling */
+	1,	/* pll_cfg: prediv */
+	8,	/* pll_cfg: ratio */
+	3,	/* pll_cfg: range */
+	1,	/* pll_cfg: reset */
+	0,	/* pll_cfg: bypass */
+	0,	/* misc: refdiv */
+	0,	/* misc: bypclk_div */
+	1,	/* misc: IO_CLK_en_core */
+	1,	/* misc: ADClkSrc */
+	0,	/* misc: modulo */
+	(3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */
+	(1 << 25) | 5816102, /* ifreq = 5.200000 MHz */
+	20452225, /* timf */
+	30000000  /* xtal_hz */
+};
+
+static struct dib7000p_config hauppauge_hvr1400_dib7000_config = {
+	.output_mpeg2_in_188_bytes = 1,
+	.hostbus_diversity = 1,
+	.tuner_is_baseband = 0,
+	.update_lna  = NULL,
+
+	.agc_config_count = 1,
+	.agc = &xc3028_agc_config,
+	.bw  = &xc3028_bw_config,
+
+	.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+	.pwm_freq_div = 0,
+	.agc_control  = NULL,
+	.spur_protect = 0,
+
+	.output_mode = OUTMODE_MPEG2_SERIAL,
+};
+
 static int cx23885_hvr1500_xc3028_callback(void *ptr, int command, int arg)
 {
 	struct cx23885_tsport *port = ptr;
@@ -343,6 +431,31 @@ static int dvb_register(struct cx23885_tsport *port)
 				&hauppauge_hvr1200_tuner_config);
 		}
 		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1400:
+		i2c_bus = &dev->i2c_bus[0];
+		port->dvb.frontend = dvb_attach(dib7000p_attach,
+			&i2c_bus->i2c_adap,
+			0x12, &hauppauge_hvr1400_dib7000_config);
+		if (port->dvb.frontend != NULL) {
+			struct dvb_frontend *fe;
+			struct xc2028_config cfg = {
+				.i2c_adap  = &dev->i2c_bus[1].i2c_adap,
+				.i2c_addr  = 0x64,
+				.callback  = cx23885_hvr1500_xc3028_callback,
+			};
+			static struct xc2028_ctrl ctl = {
+				.fname   = "xc3028L-v36.fw",
+				.max_len = 64,
+				.demod   = 5000,
+				.d2633   = 1
+			};
+
+			fe = dvb_attach(xc2028_attach,
+					port->dvb.frontend, &cfg);
+			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+				fe->ops.tuner_ops.set_config(fe, &ctl);
+		}
+		break;
 	default:
 		printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
 		       dev->name);