Merge branch 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (243 commits)
  V4L/DVB: sms: Convert IR support to use the Remote Controller core
  V4L/DVB: sms: properly initialize IR phys and IR name
  V4L/DVB: standardize names at rc-dib0700 tables
  V4L/DVB: smsusb: enable IR port for Hauppauge WinTV MiniStick
  V4L/DVB: dib0700: Fix RC protocol logic to properly handle NEC/NECx and RC-5
  V4L/DVB: dib0700: properly implement IR change_protocol
  V4L/DVB: dib0700: break keytable into NEC and RC-5 variants
  V4L/DVB: dib0700: avoid bad repeat
  V4L/DVB: Port dib0700 to rc-core
  V4L/DVB: Add a keymap file with dib0700 table
  V4L/DVB: dvb-usb: add support for rc-core mode
  V4L/DVB: dvb-usb: prepare drivers for using rc-core
  V4L/DVB: dvb-usb: get rid of struct dvb_usb_rc_key
  V4L/DVB: rj54n1cb0c: fix a comment in the driver
  V4L/DVB: V4L2: sh_vou: VOU does support the full PAL resolution too
  V4L/DVB: V4L2: sh_mobile_camera_ceu: add support for CSI2
  V4L/DVB: V4L2: soc-camera: add a MIPI CSI-2 driver for SH-Mobile platforms
  V4L/DVB: V4L2: soc-camera: export soc-camera bus type for notifications
  V4L/DVB: V4L2: mediabus: add 12-bit Bayer and YUV420 pixel formats
  V4L/DVB: mediabus: fix ambiguous pixel code names
  ...

1 files changed, 93 insertions, 0 deletions

diff --git a/drivers/media/video/davinci/Kconfig b/drivers/media/video/davinci/Kconfig
new file mode 100644
index 000000000000..6b1954035649
--- /dev/null
+++ b/drivers/media/video/davinci/Kconfig
@@ -0,0 +1,93 @@
+config DISPLAY_DAVINCI_DM646X_EVM
+	tristate "DM646x EVM Video Display"
+	depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
+	select VIDEOBUF_DMA_CONTIG
+	select VIDEO_DAVINCI_VPIF
+	select VIDEO_ADV7343
+	select VIDEO_THS7303
+	help
+	  Support for DM6467 based display device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vpif_display.
+
+config CAPTURE_DAVINCI_DM646X_EVM
+	tristate "DM646x EVM Video Capture"
+	depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
+	select VIDEOBUF_DMA_CONTIG
+	select VIDEO_DAVINCI_VPIF
+	help
+	  Support for DM6467 based capture device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vpif_capture.
+
+config VIDEO_DAVINCI_VPIF
+	tristate "DaVinci VPIF Driver"
+	depends on DISPLAY_DAVINCI_DM646X_EVM
+	help
+	  Support for DaVinci VPIF Driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vpif.
+
+config VIDEO_VPSS_SYSTEM
+	tristate "VPSS System module driver"
+	depends on ARCH_DAVINCI
+	help
+	  Support for vpss system module for video driver
+
+config VIDEO_VPFE_CAPTURE
+	tristate "VPFE Video Capture Driver"
+	depends on VIDEO_V4L2 && (ARCH_DAVINCI || ARCH_OMAP3)
+	select VIDEOBUF_DMA_CONTIG
+	help
+	  Support for DMx/AMx VPFE based frame grabber. This is the
+	  common V4L2 module for following DMx/AMx SoCs from Texas
+	  Instruments:- DM6446, DM365, DM355 & AM3517/05.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vpfe-capture.
+
+config VIDEO_DM6446_CCDC
+	tristate "DM6446 CCDC HW module"
+	depends on VIDEO_VPFE_CAPTURE
+	select VIDEO_VPSS_SYSTEM
+	default y
+	help
+	   Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
+	   with decoder modules such as TVP5146 over BT656 or
+	   sensor module such as MT9T001 over a raw interface. This
+	   module configures the interface and CCDC/ISIF to do
+	   video frame capture from slave decoders.
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called vpfe.
+
+config VIDEO_DM355_CCDC
+	tristate "DM355 CCDC HW module"
+	depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
+	select VIDEO_VPSS_SYSTEM
+	default y
+	help
+	   Enables DM355 CCD hw module. DM355 CCDC hw interfaces
+	   with decoder modules such as TVP5146 over BT656 or
+	   sensor module such as MT9T001 over a raw interface. This
+	   module configures the interface and CCDC/ISIF to do
+	   video frame capture from a slave decoders
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called vpfe.
+
+config VIDEO_ISIF
+	tristate "ISIF HW module"
+	depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE
+	select VIDEO_VPSS_SYSTEM
+	default y
+	help
+	   Enables ISIF hw module. This is the hardware module for
+	   configuring ISIF in VPFE to capture Raw Bayer RGB data  from
+	   a image sensor or YUV data from a YUV source.
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called vpfe.