Merge branch 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (243 commits)
  V4L/DVB: sms: Convert IR support to use the Remote Controller core
  V4L/DVB: sms: properly initialize IR phys and IR name
  V4L/DVB: standardize names at rc-dib0700 tables
  V4L/DVB: smsusb: enable IR port for Hauppauge WinTV MiniStick
  V4L/DVB: dib0700: Fix RC protocol logic to properly handle NEC/NECx and RC-5
  V4L/DVB: dib0700: properly implement IR change_protocol
  V4L/DVB: dib0700: break keytable into NEC and RC-5 variants
  V4L/DVB: dib0700: avoid bad repeat
  V4L/DVB: Port dib0700 to rc-core
  V4L/DVB: Add a keymap file with dib0700 table
  V4L/DVB: dvb-usb: add support for rc-core mode
  V4L/DVB: dvb-usb: prepare drivers for using rc-core
  V4L/DVB: dvb-usb: get rid of struct dvb_usb_rc_key
  V4L/DVB: rj54n1cb0c: fix a comment in the driver
  V4L/DVB: V4L2: sh_vou: VOU does support the full PAL resolution too
  V4L/DVB: V4L2: sh_mobile_camera_ceu: add support for CSI2
  V4L/DVB: V4L2: soc-camera: add a MIPI CSI-2 driver for SH-Mobile platforms
  V4L/DVB: V4L2: soc-camera: export soc-camera bus type for notifications
  V4L/DVB: V4L2: mediabus: add 12-bit Bayer and YUV420 pixel formats
  V4L/DVB: mediabus: fix ambiguous pixel code names
  ...

5 files changed, 87 insertions, 60 deletions

diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 3a4fd8514511..ffbe544e30f4 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -158,6 +158,22 @@ static struct em28xx_reg_seq evga_indtube_digital[] = {
 	{ -1,			-1,	-1,		-1},
 };
 
+/*
+ * KWorld PlusTV 340U and UB435-Q (ATSC) GPIOs map:
+ * EM_GPIO_0 - currently unknown
+ * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on)
+ * EM_GPIO_2 - currently unknown
+ * EM_GPIO_3 - currently unknown
+ * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset)
+ * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset)
+ * EM_GPIO_6 - currently unknown
+ * EM_GPIO_7 - currently unknown
+ */
+static struct em28xx_reg_seq kworld_a340_digital[] = {
+	{EM28XX_R08_GPIO,	0x6d,		~EM_GPIO_4,	10},
+	{ -1,			-1,		-1,		-1},
+};
+
 /* Pinnacle Hybrid Pro eb1a:2881 */
 static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
 	{EM28XX_R08_GPIO,	0xfd,   ~EM_GPIO_4,	10},
@@ -1667,6 +1683,16 @@ struct em28xx_board em28xx_boards[] = {
 		.tuner_gpio    = reddo_dvb_c_usb_box,
 		.has_dvb       = 1,
 	},
+	/* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold
+	 * initially as the KWorld PlusTV 340U, then as the UB435-Q.
+	 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */
+	[EM2870_BOARD_KWORLD_A340] = {
+		.name       = "KWorld PlusTV 340U or UB435-Q (ATSC)",
+		.tuner_type = TUNER_ABSENT,	/* Digital-only TDA18271HD */
+		.has_dvb    = 1,
+		.dvb_gpio   = kworld_a340_digital,
+		.tuner_gpio = default_tuner_gpio,
+	},
 };
 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
 
@@ -1788,6 +1814,8 @@ struct usb_device_id em28xx_id_table[] = {
 			.driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
 	{ USB_DEVICE(0xeb1a, 0x50a6),
 			.driver_info = EM2860_BOARD_GADMEI_UTV330 },
+	{ USB_DEVICE(0x1b80, 0xa340),
+			.driver_info = EM2870_BOARD_KWORLD_A340 },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index cf1d8c3655fc..3ac8d3025fea 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -30,11 +30,13 @@
 #include "tuner-simple.h"
 
 #include "lgdt330x.h"
+#include "lgdt3305.h"
 #include "zl10353.h"
 #include "s5h1409.h"
 #include "mt352.h"
 #include "mt352_priv.h" /* FIXME */
 #include "tda1002x.h"
+#include "tda18271.h"
 
 MODULE_DESCRIPTION("driver for em28xx based DVB cards");
 MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
@@ -231,6 +233,18 @@ static struct lgdt330x_config em2880_lgdt3303_dev = {
 	.demod_chip = LGDT3303,
 };
 
+static struct lgdt3305_config em2870_lgdt3304_dev = {
+	.i2c_addr           = 0x0e,
+	.demod_chip         = LGDT3304,
+	.spectral_inversion = 1,
+	.deny_i2c_rptr      = 1,
+	.mpeg_mode          = LGDT3305_MPEG_PARALLEL,
+	.tpclk_edge         = LGDT3305_TPCLK_FALLING_EDGE,
+	.tpvalid_polarity   = LGDT3305_TP_VALID_HIGH,
+	.vsb_if_khz         = 3250,
+	.qam_if_khz         = 4000,
+};
+
 static struct zl10353_config em28xx_zl10353_with_xc3028 = {
 	.demod_address = (0x1e >> 1),
 	.no_tuner = 1,
@@ -247,6 +261,17 @@ static struct s5h1409_config em28xx_s5h1409_with_xc3028 = {
 	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
 };
 
+static struct tda18271_std_map kworld_a340_std_map = {
+	.atsc_6   = { .if_freq = 3250, .agc_mode = 3, .std = 0,
+		      .if_lvl = 1, .rfagc_top = 0x37, },
+	.qam_6    = { .if_freq = 4000, .agc_mode = 3, .std = 1,
+		      .if_lvl = 1, .rfagc_top = 0x37, },
+};
+
+static struct tda18271_config kworld_a340_config = {
+	.std_map           = &kworld_a340_std_map,
+};
+
 static struct zl10353_config em28xx_zl10353_xc3028_no_i2c_gate = {
 	.demod_address = (0x1e >> 1),
 	.no_tuner = 1,
@@ -572,6 +597,14 @@ static int dvb_init(struct em28xx *dev)
 			}
 		}
 		break;
+	case EM2870_BOARD_KWORLD_A340:
+		dvb->frontend = dvb_attach(lgdt3305_attach,
+					   &em2870_lgdt3304_dev,
+					   &dev->i2c_adap);
+		if (dvb->frontend != NULL)
+			dvb_attach(tda18271_attach, dvb->frontend, 0x60,
+				   &dev->i2c_adap, &kworld_a340_config);
+		break;
 	default:
 		em28xx_errdev("/2: The frontend of your DVB/ATSC card"
 				" isn't supported yet\n");
diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c
index 5c3fd9411b1f..6759cd5570dd 100644
--- a/drivers/media/video/em28xx/em28xx-input.c
+++ b/drivers/media/video/em28xx/em28xx-input.c
@@ -65,17 +65,14 @@ struct em28xx_ir_poll_result {
 struct em28xx_IR {
 	struct em28xx *dev;
 	struct input_dev *input;
-	struct ir_input_state ir;
 	char name[32];
 	char phys[32];
 
 	/* poll external decoder */
 	int polling;
 	struct delayed_work work;
-	unsigned int last_toggle:1;
 	unsigned int full_code:1;
 	unsigned int last_readcount;
-	unsigned int repeat_interval;
 
 	int  (*get_key)(struct em28xx_IR *, struct em28xx_ir_poll_result *);
 
@@ -291,67 +288,39 @@ static int em2874_polling_getkey(struct em28xx_IR *ir,
 static void em28xx_ir_handle_key(struct em28xx_IR *ir)
 {
 	int result;
-	int do_sendkey = 0;
 	struct em28xx_ir_poll_result poll_result;
 
 	/* read the registers containing the IR status */
 	result = ir->get_key(ir, &poll_result);
-	if (result < 0) {
+	if (unlikely(result < 0)) {
 		dprintk("ir->get_key() failed %d\n", result);
 		return;
 	}
 
-	dprintk("ir->get_key result tb=%02x rc=%02x lr=%02x data=%02x%02x\n",
-		poll_result.toggle_bit, poll_result.read_count,
-		ir->last_readcount, poll_result.rc_address,
-		poll_result.rc_data[0]);
-
-	if (ir->dev->chip_id == CHIP_ID_EM2874) {
-		/* The em2874 clears the readcount field every time the
-		   register is read.  The em2860/2880 datasheet says that it
-		   is supposed to clear the readcount, but it doesn't.  So with
-		   the em2874, we are looking for a non-zero read count as
-		   opposed to a readcount that is incrementing */
-		ir->last_readcount = 0;
-	}
-
-	if (poll_result.read_count == 0) {
-		/* The button has not been pressed since the last read */
-	} else if (ir->last_toggle != poll_result.toggle_bit) {
-		/* A button has been pressed */
-		dprintk("button has been pressed\n");
-		ir->last_toggle = poll_result.toggle_bit;
-		ir->repeat_interval = 0;
-		do_sendkey = 1;
-	} else if (poll_result.toggle_bit == ir->last_toggle &&
-		   poll_result.read_count > 0 &&
-		   poll_result.read_count != ir->last_readcount) {
-		/* The button is still being held down */
-		dprintk("button being held down\n");
-
-		/* Debouncer for first keypress */
-		if (ir->repeat_interval++ > 9) {
-			/* Start repeating after 1 second */
-			do_sendkey = 1;
-		}
-	}
-
-	if (do_sendkey) {
-		dprintk("sending keypress\n");
-
+	if (unlikely(poll_result.read_count != ir->last_readcount)) {
+		dprintk("%s: toggle: %d, count: %d, key 0x%02x%02x\n", __func__,
+			poll_result.toggle_bit, poll_result.read_count,
+			poll_result.rc_address, poll_result.rc_data[0]);
 		if (ir->full_code)
-			ir_input_keydown(ir->input, &ir->ir,
-					 poll_result.rc_address << 8 |
-					 poll_result.rc_data[0]);
+			ir_keydown(ir->input,
+				   poll_result.rc_address << 8 |
+				   poll_result.rc_data[0],
+				   poll_result.toggle_bit);
 		else
-			ir_input_keydown(ir->input, &ir->ir,
-					 poll_result.rc_data[0]);
-
-		ir_input_nokey(ir->input, &ir->ir);
+			ir_keydown(ir->input,
+				   poll_result.rc_data[0],
+				   poll_result.toggle_bit);
+
+		if (ir->dev->chip_id == CHIP_ID_EM2874)
+			/* The em2874 clears the readcount field every time the
+			   register is read.  The em2860/2880 datasheet says that it
+			   is supposed to clear the readcount, but it doesn't.  So with
+			   the em2874, we are looking for a non-zero read count as
+			   opposed to a readcount that is incrementing */
+			ir->last_readcount = 0;
+		else
+			ir->last_readcount = poll_result.read_count;
 	}
-
-	ir->last_readcount = poll_result.read_count;
-	return;
 }
 
 static void em28xx_ir_work(struct work_struct *work)
@@ -466,11 +435,6 @@ int em28xx_ir_init(struct em28xx *dev)
 	usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
 	strlcat(ir->phys, "/input0", sizeof(ir->phys));
 
-	/* Set IR protocol */
-	err = ir_input_init(input_dev, &ir->ir, IR_TYPE_OTHER);
-	if (err < 0)
-		goto err_out_free;
-
 	input_dev->name = ir->name;
 	input_dev->phys = ir->phys;
 	input_dev->id.bustype = BUS_USB;
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 20090e34173a..7b9ec6e493e4 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -654,12 +654,12 @@ static inline int em28xx_isoc_copy_vbi(struct em28xx *dev, struct urb *urb)
 		}
 
 		if (buf != NULL && dev->capture_type == 2) {
-			if (len > 4 && p[0] == 0x88 && p[1] == 0x88 &&
+			if (len >= 4 && p[0] == 0x88 && p[1] == 0x88 &&
 			    p[2] == 0x88 && p[3] == 0x88) {
 				p += 4;
 				len -= 4;
 			}
-			if (len > 4 && p[0] == 0x22 && p[1] == 0x5a) {
+			if (len >= 4 && p[0] == 0x22 && p[1] == 0x5a) {
 				em28xx_isocdbg("Video frame %d, len=%i, %s\n",
 					       p[2], len, (p[2] & 1) ?
 					       "odd" : "even");
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index b252d1b1b2a7..1c61a6b65d28 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -32,6 +32,7 @@
 #include <linux/i2c.h>
 #include <linux/mutex.h>
 #include <media/ir-kbd-i2c.h>
+#include <media/ir-core.h>
 #if defined(CONFIG_VIDEO_EM28XX_DVB) || defined(CONFIG_VIDEO_EM28XX_DVB_MODULE)
 #include <media/videobuf-dvb.h>
 #endif
@@ -113,6 +114,7 @@
 #define EM2870_BOARD_REDDO_DVB_C_USB_BOX          73
 #define EM2800_BOARD_VC211A			  74
 #define EM2882_BOARD_DIKOM_DK300		  75
+#define EM2870_BOARD_KWORLD_A340		  76
 
 /* Limits minimum and default number of buffers */
 #define EM28XX_MIN_BUF 4