diff options
author | Hans Verkuil <hverkuil@xs4all.nl> | 2009-03-29 19:20:26 -0300 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@redhat.com> | 2009-04-06 21:44:21 -0300 |
commit | cc26b076cf8b1040ccc514302ef9a24042272ec3 (patch) | |
tree | 6b41545a2d59f531cffd32d7161dcabc1d40d0e1 /drivers/media/video | |
parent | 7c9fc9d50f97c9a6733ff1a22b6e31bcd91778e2 (diff) |
V4L/DVB (11369): v4l2-subdev: add load_fw and use that instead of abusing core->init.
The init callback was used in several places to load firmware. Make a separate
load_fw callback for that. This makes the code a lot more understandable.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers/media/video')
-rw-r--r-- | drivers/media/video/cx18/cx18-av-core.c | 60 | ||||
-rw-r--r-- | drivers/media/video/cx18/cx18-av-core.h | 5 | ||||
-rw-r--r-- | drivers/media/video/cx18/cx18-driver.c | 4 | ||||
-rw-r--r-- | drivers/media/video/cx231xx/cx231xx-cards.c | 2 | ||||
-rw-r--r-- | drivers/media/video/cx23885/cx23885-cards.c | 2 | ||||
-rw-r--r-- | drivers/media/video/cx25840/cx25840-core.c | 8 | ||||
-rw-r--r-- | drivers/media/video/ivtv/ivtv-driver.c | 2 | ||||
-rw-r--r-- | drivers/media/video/pvrusb2/pvrusb2-hdw.c | 2 |
8 files changed, 40 insertions, 45 deletions
diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c index f4dd9d78eb3d..0c58e55fdbee 100644 --- a/drivers/media/video/cx18/cx18-av-core.c +++ b/drivers/media/video/cx18/cx18-av-core.c @@ -203,43 +203,42 @@ static int cx18_av_reset(struct v4l2_subdev *sd, u32 val) static int cx18_av_init(struct v4l2_subdev *sd, u32 val) { - struct cx18_av_state *state = to_cx18_av_state(sd); struct cx18 *cx = v4l2_get_subdevdata(sd); - switch (val) { - case CX18_AV_INIT_PLLS: - /* - * The crystal freq used in calculations in this driver will be - * 28.636360 MHz. - * Aim to run the PLLs' VCOs near 400 MHz to minimze errors. - */ + /* + * The crystal freq used in calculations in this driver will be + * 28.636360 MHz. + * Aim to run the PLLs' VCOs near 400 MHz to minimze errors. + */ - /* - * VDCLK Integer = 0x0f, Post Divider = 0x04 - * AIMCLK Integer = 0x0e, Post Divider = 0x16 - */ - cx18_av_write4(cx, CXADEC_PLL_CTRL1, 0x160e040f); + /* + * VDCLK Integer = 0x0f, Post Divider = 0x04 + * AIMCLK Integer = 0x0e, Post Divider = 0x16 + */ + cx18_av_write4(cx, CXADEC_PLL_CTRL1, 0x160e040f); - /* VDCLK Fraction = 0x2be2fe */ - /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz before post divide */ - cx18_av_write4(cx, CXADEC_VID_PLL_FRAC, 0x002be2fe); + /* VDCLK Fraction = 0x2be2fe */ + /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz before post divide */ + cx18_av_write4(cx, CXADEC_VID_PLL_FRAC, 0x002be2fe); - /* AIMCLK Fraction = 0x05227ad */ - /* xtal * 0xe.2913d68/0x16 = 48000 * 384: 406 MHz pre post-div*/ - cx18_av_write4(cx, CXADEC_AUX_PLL_FRAC, 0x005227ad); + /* AIMCLK Fraction = 0x05227ad */ + /* xtal * 0xe.2913d68/0x16 = 48000 * 384: 406 MHz pre post-div*/ + cx18_av_write4(cx, CXADEC_AUX_PLL_FRAC, 0x005227ad); - /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x16 */ - cx18_av_write(cx, CXADEC_I2S_MCLK, 0x56); - break; + /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x16 */ + cx18_av_write(cx, CXADEC_I2S_MCLK, 0x56); + return 0; +} - case CX18_AV_INIT_NORMAL: - default: - if (!state->is_initialized) { - /* initialize on first use */ - state->is_initialized = 1; - cx18_av_initialize(cx); - } - break; +static int cx18_av_load_fw(struct v4l2_subdev *sd) +{ + struct cx18_av_state *state = to_cx18_av_state(sd); + struct cx18 *cx = v4l2_get_subdevdata(sd); + + if (!state->is_initialized) { + /* initialize on first use */ + state->is_initialized = 1; + cx18_av_initialize(cx); } return 0; } @@ -1185,6 +1184,7 @@ static const struct v4l2_subdev_core_ops cx18_av_general_ops = { .g_chip_ident = cx18_av_g_chip_ident, .log_status = cx18_av_log_status, .init = cx18_av_init, + .load_fw = cx18_av_load_fw, .reset = cx18_av_reset, .queryctrl = cx18_av_queryctrl, .g_ctrl = cx18_av_g_ctrl, diff --git a/drivers/media/video/cx18/cx18-av-core.h b/drivers/media/video/cx18/cx18-av-core.h index c458120e8c90..9b84a0c58e0e 100644 --- a/drivers/media/video/cx18/cx18-av-core.h +++ b/drivers/media/video/cx18/cx18-av-core.h @@ -328,11 +328,6 @@ static inline struct cx18_av_state *to_cx18_av_state(struct v4l2_subdev *sd) return container_of(sd, struct cx18_av_state, sd); } -enum cx18_av_subdev_init_arg { - CX18_AV_INIT_NORMAL = 0, - CX18_AV_INIT_PLLS = 1, -}; - /* ----------------------------------------------------------------------- */ /* cx18_av-core.c */ int cx18_av_write(struct cx18 *cx, u16 addr, u8 value); diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 210c68aaae00..49b1c3d7b1a8 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -810,7 +810,7 @@ static int __devinit cx18_probe(struct pci_dev *pci_dev, CX18_ERR("Could not register A/V decoder subdevice\n"); goto free_map; } - cx18_call_hw(cx, CX18_HW_418_AV, core, init, (u32) CX18_AV_INIT_PLLS); + cx18_call_hw(cx, CX18_HW_418_AV, core, init, 0); /* Initialize GPIO Reset Controller to do chip resets during i2c init */ if (cx->card->hw_all & CX18_HW_GPIO_RESET_CTRL) { @@ -1028,7 +1028,7 @@ int cx18_init_on_first_open(struct cx18 *cx) cx18_vapi(cx, CX18_APU_STOP, 1, CX18_APU_ENCODING_METHOD_MPEG); /* Init the A/V decoder, if it hasn't been already */ - v4l2_subdev_call(cx->sd_av, core, init, (u32) CX18_AV_INIT_NORMAL); + v4l2_subdev_call(cx->sd_av, core, load_fw); vf.tuner = 0; vf.type = V4L2_TUNER_ANALOG_TV; diff --git a/drivers/media/video/cx231xx/cx231xx-cards.c b/drivers/media/video/cx231xx/cx231xx-cards.c index 79833c25e705..b63719fddee4 100644 --- a/drivers/media/video/cx231xx/cx231xx-cards.c +++ b/drivers/media/video/cx231xx/cx231xx-cards.c @@ -316,7 +316,7 @@ void cx231xx_card_setup(struct cx231xx *dev) "cx25840", "cx25840", 0x88 >> 1); if (dev->sd_cx25840 == NULL) cx231xx_info("cx25840 subdev registration failure\n"); - cx25840_call(dev, core, init, 0); + cx25840_call(dev, core, load_fw); } diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 5e4b7e790d94..fe8525517c4e 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -741,7 +741,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->i2c_bus[2].i2c_adap, "cx25840", "cx25840", 0x88 >> 1); - v4l2_subdev_call(dev->sd_cx25840, core, init, 0); + v4l2_subdev_call(dev->sd_cx25840, core, load_fw); break; } diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index f8ed3c09b17c..51266812d338 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -1182,7 +1182,7 @@ static void log_audio_status(struct i2c_client *client) /* ----------------------------------------------------------------------- */ -/* This init operation must be called to load the driver's firmware. +/* This load_fw operation must be called to load the driver's firmware. Without this the audio standard detection will fail and you will only get mono. @@ -1192,13 +1192,13 @@ static void log_audio_status(struct i2c_client *client) postponing it is that loading this firmware takes a long time (seconds) due to the slow i2c bus speed. So it will speed up the boot process if you can avoid loading the fw as long as the video device isn't used. */ -static int cx25840_init(struct v4l2_subdev *sd, u32 val) +static int cx25840_load_fw(struct v4l2_subdev *sd) { struct cx25840_state *state = to_state(sd); struct i2c_client *client = v4l2_get_subdevdata(sd); if (!state->is_initialized) { - /* initialize on first use */ + /* initialize and load firmware */ state->is_initialized = 1; if (state->is_cx25836) cx25836_initialize(client); @@ -1473,7 +1473,7 @@ static const struct v4l2_subdev_core_ops cx25840_core_ops = { .s_ctrl = cx25840_s_ctrl, .queryctrl = cx25840_queryctrl, .reset = cx25840_reset, - .init = cx25840_init, + .load_fw = cx25840_load_fw, #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = cx25840_g_register, .s_register = cx25840_s_register, diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index eca8bf92a225..07d5ffea6e6f 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -1234,7 +1234,7 @@ int ivtv_init_on_first_open(struct ivtv *itv) if (itv->card->hw_all & IVTV_HW_CX25840) { struct v4l2_control ctrl; - v4l2_subdev_call(itv->sd_video, core, init, 0); + v4l2_subdev_call(itv->sd_video, core, load_fw); /* CX25840_CID_ENABLE_PVR150_WORKAROUND */ ctrl.id = V4L2_CID_PRIVATE_BASE; ctrl.value = itv->pvr150_workaround; diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index eff92113daf9..59a0259266fb 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -2185,7 +2185,7 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw) pvr2_hdw_load_modules(hdw); if (!pvr2_hdw_dev_ok(hdw)) return; - v4l2_device_call_all(&hdw->v4l2_dev, 0, core, init, 0); + v4l2_device_call_all(&hdw->v4l2_dev, 0, core, load_fw); for (idx = 0; idx < CTRLDEF_COUNT; idx++) { cptr = hdw->controls + idx; |