[SCSI] fusion - mptctl - backplane istwi fix

Moving the toolbox call from mptbase.c, over to
mptctl.c, and using the mptctl infastructure to issue
the call.  The existing code is hanging on certain HP platforms
when this ioctl is issued, and this patch fix's that.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 62 insertions, 12 deletions

diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c
index be5fcd8db63b..2df3b8756545 100644
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -2271,13 +2271,16 @@ mptctl_hp_hostinfo(unsigned long arg, unsigned int data_size)
 	hp_host_info_t	__user *uarg = (void __user *) arg;
 	MPT_ADAPTER		*ioc;
 	struct pci_dev		*pdev;
-	char			*pbuf;
+	char                    *pbuf=NULL;
 	dma_addr_t		buf_dma;
 	hp_host_info_t		karg;
 	CONFIGPARMS		cfg;
 	ConfigPageHeader_t	hdr;
 	int			iocnum;
 	int			rc, cim_rev;
+	ToolboxIstwiReadWriteRequest_t	*IstwiRWRequest;
+	MPT_FRAME_HDR		*mf = NULL;
+	MPIHeader_t		*mpi_hdr;
 
 	dctlprintk((": mptctl_hp_hostinfo called.\n"));
 	/* Reset long to int. Should affect IA64 and SPARC only
@@ -2413,20 +2416,67 @@ mptctl_hp_hostinfo(unsigned long arg, unsigned int data_size)
 		}
 	}
 
-	cfg.pageAddr = 0;
-	cfg.action = MPI_TOOLBOX_ISTWI_READ_WRITE_TOOL;
-	cfg.dir = MPI_TB_ISTWI_FLAGS_READ;
-	cfg.timeout = 10;
+	/* 
+	 * Gather ISTWI(Industry Standard Two Wire Interface) Data
+	 */
+	if ((mf = mpt_get_msg_frame(mptctl_id, ioc)) == NULL) {
+		dfailprintk((MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
+		    ioc->name,__FUNCTION__));
+		goto out;
+	}
+
+	IstwiRWRequest = (ToolboxIstwiReadWriteRequest_t *)mf;
+	mpi_hdr = (MPIHeader_t *) mf;
+	memset(IstwiRWRequest,0,sizeof(ToolboxIstwiReadWriteRequest_t));
+	IstwiRWRequest->Function = MPI_FUNCTION_TOOLBOX;
+	IstwiRWRequest->Tool = MPI_TOOLBOX_ISTWI_READ_WRITE_TOOL;
+	IstwiRWRequest->MsgContext = mpi_hdr->MsgContext;
+	IstwiRWRequest->Flags = MPI_TB_ISTWI_FLAGS_READ;
+	IstwiRWRequest->NumAddressBytes = 0x01;
+	IstwiRWRequest->DataLength = cpu_to_le16(0x04);
+	if (pdev->devfn & 1)
+		IstwiRWRequest->DeviceAddr = 0xB2;
+	else
+		IstwiRWRequest->DeviceAddr = 0xB0;
+
 	pbuf = pci_alloc_consistent(ioc->pcidev, 4, &buf_dma);
-	if (pbuf) {
-		cfg.physAddr = buf_dma;
-		if ((mpt_toolbox(ioc, &cfg)) == 0) {
-			karg.rsvd = *(u32 *)pbuf;
-		}
-		pci_free_consistent(ioc->pcidev, 4, pbuf, buf_dma);
-		pbuf = NULL;
+	if (!pbuf)
+		goto out;
+	mpt_add_sge((char *)&IstwiRWRequest->SGL,
+	    (MPT_SGE_FLAGS_SSIMPLE_READ|4), buf_dma);
+
+	ioc->ioctl->wait_done = 0;
+	mpt_put_msg_frame(mptctl_id, ioc, mf);
+
+	rc = wait_event_timeout(mptctl_wait,
+	     ioc->ioctl->wait_done == 1,
+	     HZ*MPT_IOCTL_DEFAULT_TIMEOUT /* 10 sec */);
+
+	if(rc <=0 && (ioc->ioctl->wait_done != 1 )) {
+		/* 
+		 * Now we need to reset the board
+		 */
+		mpt_free_msg_frame(ioc, mf);
+		mptctl_timeout_expired(ioc->ioctl);
+		goto out;
 	}
 
+	/* 
+	 *ISTWI Data Definition
+	 * pbuf[0] = FW_VERSION = 0x4
+	 * pbuf[1] = Bay Count = 6 or 4 or 2, depending on
+	 *  the config, you should be seeing one out of these three values
+	 * pbuf[2] = Drive Installed Map = bit pattern depend on which
+	 *   bays have drives in them
+	 * pbuf[3] = Checksum (0x100 = (byte0 + byte2 + byte3)
+	 */
+	if (ioc->ioctl->status & MPT_IOCTL_STATUS_RF_VALID)
+		karg.rsvd = *(u32 *)pbuf;
+
+ out:
+	if (pbuf)
+		pci_free_consistent(ioc->pcidev, 4, pbuf, buf_dma);
+
 	/* Copy the data from kernel memory to user memory
 	 */
 	if (copy_to_user((char __user *)arg, &karg, sizeof(hp_host_info_t))) {