summaryrefslogtreecommitdiff
path: root/drivers/message/i2o/pci.c
diff options
context:
space:
mode:
authorMarkus Lidel <Markus.Lidel@shadowconnect.com>2005-06-23 22:02:16 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-06-24 00:05:28 -0700
commitf10378fff658f61307496e0ae00095041725cf07 (patch)
tree0c0413649317677771fa325dded94f1e12a6a0b7 /drivers/message/i2o/pci.c
parentf88e119c4b824a5017456fa094950d0f4092d96c (diff)
[PATCH] I2O: new sysfs attributes and Adaptec specific block device access and 64-bit DMA support
Changes: - Added Bus-OSM which could be used by user space programs to reset a channel on the controller - Make ioctl's in Config-OSM obsolete in prefer for sysfs attributes and move those to its own file - Added sysfs attribute for firmware read and write access for I2O controllers - Added special handling of firmware read and write access for Adaptec controllers - Added vendor id and product id as sysfs-attribute to Executive classes - Added automatic notification of LCT change handling to Exec-OSM - Added flushing function to Block-OSM for later barrier implementation - Use PRIVATE messages for Block access on Adaptec controllers, which are faster then BLOCK class access - Cleaned up support for Promise controller - New messages are now detected using the IRQ status register as suggested by the I2O spec - Added i2o_dma_high() and i2o_dma_low() functions - Added facility for SG tablesize calculation when using 32-bit and 64-bit DMA addresses - Added i2o_dma_map_single() and i2o_dma_map_sg() which could build the SG list for 32-bit as well as 64-bit DMA addresses Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'drivers/message/i2o/pci.c')
-rw-r--r--drivers/message/i2o/pci.c67
1 files changed, 19 insertions, 48 deletions
diff --git a/drivers/message/i2o/pci.c b/drivers/message/i2o/pci.c
index f33fd81f77a4..a499af096a68 100644
--- a/drivers/message/i2o/pci.c
+++ b/drivers/message/i2o/pci.c
@@ -50,30 +50,6 @@ static struct pci_device_id __devinitdata i2o_pci_ids[] = {
};
/**
- * i2o_dma_realloc - Realloc DMA memory
- * @dev: struct device pointer to the PCI device of the I2O controller
- * @addr: pointer to a i2o_dma struct DMA buffer
- * @len: new length of memory
- * @gfp_mask: GFP mask
- *
- * If there was something allocated in the addr, free it first. If len > 0
- * than try to allocate it and write the addresses back to the addr
- * structure. If len == 0 set the virtual address to NULL.
- *
- * Returns the 0 on success or negative error code on failure.
- */
-int i2o_dma_realloc(struct device *dev, struct i2o_dma *addr, size_t len,
- unsigned int gfp_mask)
-{
- i2o_dma_free(dev, addr);
-
- if (len)
- return i2o_dma_alloc(dev, addr, len, gfp_mask);
-
- return 0;
-};
-
-/**
* i2o_pci_free - Frees the DMA memory for the I2O controller
* @c: I2O controller to free
*
@@ -185,6 +161,7 @@ static int __devinit i2o_pci_alloc(struct i2o_controller *c)
} else
c->in_queue = c->base;
+ c->irq_status = c->base.virt + I2O_IRQ_STATUS;
c->irq_mask = c->base.virt + I2O_IRQ_MASK;
c->in_port = c->base.virt + I2O_IN_PORT;
c->out_port = c->base.virt + I2O_OUT_PORT;
@@ -232,36 +209,30 @@ static int __devinit i2o_pci_alloc(struct i2o_controller *c)
static irqreturn_t i2o_pci_interrupt(int irq, void *dev_id, struct pt_regs *r)
{
struct i2o_controller *c = dev_id;
- struct device *dev = &c->pdev->dev;
- u32 mv = readl(c->out_port);
-
- /*
- * Old 960 steppings had a bug in the I2O unit that caused
- * the queue to appear empty when it wasn't.
- */
- if (mv == I2O_QUEUE_EMPTY) {
- mv = readl(c->out_port);
- if (unlikely(mv == I2O_QUEUE_EMPTY))
- return IRQ_NONE;
- else
- pr_debug("%s: 960 bug detected\n", c->name);
- }
+ u32 m;
+ irqreturn_t rc = IRQ_NONE;
+
+ while (readl(c->irq_status) & I2O_IRQ_OUTBOUND_POST) {
+ m = readl(c->out_port);
+ if (m == I2O_QUEUE_EMPTY) {
+ /*
+ * Old 960 steppings had a bug in the I2O unit that
+ * caused the queue to appear empty when it wasn't.
+ */
+ m = readl(c->out_port);
+ if (unlikely(m == I2O_QUEUE_EMPTY))
+ break;
+ }
- while (mv != I2O_QUEUE_EMPTY) {
/* dispatch it */
- if (i2o_driver_dispatch(c, mv))
+ if (i2o_driver_dispatch(c, m))
/* flush it if result != 0 */
- i2o_flush_reply(c, mv);
+ i2o_flush_reply(c, m);
- /*
- * That 960 bug again...
- */
- mv = readl(c->out_port);
- if (mv == I2O_QUEUE_EMPTY)
- mv = readl(c->out_port);
+ rc = IRQ_HANDLED;
}
- return IRQ_HANDLED;
+ return rc;
}
/**