Merge tag 'mfd-for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Changes to existing drivers:

   - Rename child driver [axp288_battery => axp288_fuel_gauge]; axp20x
   - Rename child driver [max77693-flash => max77693-led]; max77693
   - Error handling fixes; intel_soc_pmic
   - GPIO tweaking; intel_soc_pmic
   - Remove non-DT code; vexpress-sysreg, tc3589x
   - Remove unused/legacy code; ti_am335x_tscadc, rts5249, rtsx_gops, rtsx_pcr,
                                rtc-s5m, sec-core, max77693, menelaus,
                                wm5102-tables
   - Trivial fixups; rtsx_pci, da9150-core, sec-core, max7769, max77693,
                     mc13xxx-core, dln2, hi6421-pmic-core, rk808, twl4030-power,
                     lpc_ich, menelaus, twl6040
   - Update register/address values; rts5227, rts5249
   - DT and/or binding document fixups; arizona, da9150, mt6397, axp20x,
                                        qcom-rpm, qcom-spmi-pmic
   - Couple of trivial core Kconfig fixups
   - Remove use of seq_printf return value; ab8500-debugfs
   - Remove __exit markups; menelaus, tps65010
   - Fix platform-device name collisions; mfd-core

  New drivers/supported devices:

   - Add support for wm8280/wm8281 into arizona
   - Add support for COMe-cBL6 into kempld-core
   - Add support for rts524a and rts525a into rts5249
   - Add support for ipq8064 into qcom_rpm
   - Add support for extcon into axp20x
   - New MediaTek MT6397 PMIC driver
   - New Maxim MAX77843 PMIC dirver
   - New Intel Quark X1000 I2C-GPIO driver
   - New Skyworks SKY81452 driver"

* tag 'mfd-for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits)
  mfd: sec: Fix RTC alarm interrupt number on S2MPS11
  mfd: wm5102: Remove registers for output 3R from readable list
  mfd: tps65010: Remove incorrect __exit markups
  mfd: devicetree: bindings: Add Qualcomm RPM regulator subnodes
  mfd: axp20x: Add support for extcon cell
  mfd: lpc_ich: Sort IDs
  mfd: twl6040: Remove wrong and unneeded "platform:twl6040" modalias
  mfd: qcom-spmi-pmic: Add specific compatible strings for Qualcomm's SPMI PMIC's
  mfd: axp20x: Fix duplicate const for model names
  mfd: menelaus: Use macro for magic number
  mfd: menelaus: Drop support for SW controller VCORE
  mfd: menelaus: Delete omap_has_menelaus
  mfd: arizona: Correct type of gpio_defaults
  mfd: lpc_ich: Sort IDs
  mfd: Fix a typo in Kconfig
  mfd: qcom_rpm: Add support for IPQ8064
  mfd: devicetree: qcom_rpm: Document IPQ8064 resources
  mfd: core: Fix platform-device name collisions
  mfd: intel_quark_i2c_gpio: Don't crash if !DMI
  dt-bindings: Add vendor-prefix for X-Powers
  ...

1 files changed, 243 insertions, 0 deletions

diff --git a/drivers/mfd/max77843.c b/drivers/mfd/max77843.c
new file mode 100644
index 000000000000..a354ac677ec7
--- /dev/null
+++ b/drivers/mfd/max77843.c
@@ -0,0 +1,243 @@
+/*
+ * MFD core driver for the Maxim MAX77843
+ *
+ * Copyright (C) 2015 Samsung Electronics
+ * Author: Jaewon Kim <jaewon02.kim@samsung.com>
+ * Author: Beomho Seo <beomho.seo@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max77843-private.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+static const struct mfd_cell max77843_devs[] = {
+	{
+		.name = "max77843-muic",
+		.of_compatible = "maxim,max77843-muic",
+	}, {
+		.name = "max77843-regulator",
+		.of_compatible = "maxim,max77843-regulator",
+	}, {
+		.name = "max77843-charger",
+		.of_compatible = "maxim,max77843-charger"
+	}, {
+		.name = "max77843-fuelgauge",
+		.of_compatible = "maxim,max77843-fuelgauge",
+	}, {
+		.name = "max77843-haptic",
+		.of_compatible = "maxim,max77843-haptic",
+	},
+};
+
+static const struct regmap_config max77843_charger_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.max_register	= MAX77843_CHG_REG_END,
+};
+
+static const struct regmap_config max77843_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.max_register	= MAX77843_SYS_REG_END,
+};
+
+static const struct regmap_irq max77843_irqs[] = {
+	/* TOPSYS interrupts */
+	{ .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSUVLO_INT, },
+	{ .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSOVLO_INT, },
+	{ .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TSHDN_INT, },
+	{ .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TM_INT, },
+};
+
+static const struct regmap_irq_chip max77843_irq_chip = {
+	.name		= "max77843",
+	.status_base	= MAX77843_SYS_REG_SYSINTSRC,
+	.mask_base	= MAX77843_SYS_REG_SYSINTMASK,
+	.mask_invert	= false,
+	.num_regs	= 1,
+	.irqs		= max77843_irqs,
+	.num_irqs	= ARRAY_SIZE(max77843_irqs),
+};
+
+/* Charger and Charger regulator use same regmap. */
+static int max77843_chg_init(struct max77843 *max77843)
+{
+	int ret;
+
+	max77843->i2c_chg = i2c_new_dummy(max77843->i2c->adapter, I2C_ADDR_CHG);
+	if (!max77843->i2c_chg) {
+		dev_err(&max77843->i2c->dev,
+				"Cannot allocate I2C device for Charger\n");
+		return PTR_ERR(max77843->i2c_chg);
+	}
+	i2c_set_clientdata(max77843->i2c_chg, max77843);
+
+	max77843->regmap_chg = devm_regmap_init_i2c(max77843->i2c_chg,
+			&max77843_charger_regmap_config);
+	if (IS_ERR(max77843->regmap_chg)) {
+		ret = PTR_ERR(max77843->regmap_chg);
+		goto err_chg_i2c;
+	}
+
+	return 0;
+
+err_chg_i2c:
+	i2c_unregister_device(max77843->i2c_chg);
+
+	return ret;
+}
+
+static int max77843_probe(struct i2c_client *i2c,
+			  const struct i2c_device_id *id)
+{
+	struct max77843 *max77843;
+	unsigned int reg_data;
+	int ret;
+
+	max77843 = devm_kzalloc(&i2c->dev, sizeof(*max77843), GFP_KERNEL);
+	if (!max77843)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, max77843);
+	max77843->dev = &i2c->dev;
+	max77843->i2c = i2c;
+	max77843->irq = i2c->irq;
+
+	max77843->regmap = devm_regmap_init_i2c(i2c,
+			&max77843_regmap_config);
+	if (IS_ERR(max77843->regmap)) {
+		dev_err(&i2c->dev, "Failed to allocate topsys register map\n");
+		return PTR_ERR(max77843->regmap);
+	}
+
+	ret = regmap_add_irq_chip(max77843->regmap, max77843->irq,
+			IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
+			0, &max77843_irq_chip, &max77843->irq_data);
+	if (ret) {
+		dev_err(&i2c->dev, "Failed to add TOPSYS IRQ chip\n");
+		return ret;
+	}
+
+	ret = regmap_read(max77843->regmap,
+			MAX77843_SYS_REG_PMICID, &reg_data);
+	if (ret < 0) {
+		dev_err(&i2c->dev, "Failed to read PMIC ID\n");
+		goto err_pmic_id;
+	}
+	dev_info(&i2c->dev, "device ID: 0x%x\n", reg_data);
+
+	ret = max77843_chg_init(max77843);
+	if (ret) {
+		dev_err(&i2c->dev, "Failed to init Charger\n");
+		goto err_pmic_id;
+	}
+
+	ret = regmap_update_bits(max77843->regmap,
+				 MAX77843_SYS_REG_INTSRCMASK,
+				 MAX77843_INTSRC_MASK_MASK,
+				 (unsigned int)~MAX77843_INTSRC_MASK_MASK);
+	if (ret < 0) {
+		dev_err(&i2c->dev, "Failed to unmask interrupt source\n");
+		goto err_pmic_id;
+	}
+
+	ret = mfd_add_devices(max77843->dev, -1, max77843_devs,
+			      ARRAY_SIZE(max77843_devs), NULL, 0, NULL);
+	if (ret < 0) {
+		dev_err(&i2c->dev, "Failed to add mfd device\n");
+		goto err_pmic_id;
+	}
+
+	device_init_wakeup(max77843->dev, true);
+
+	return 0;
+
+err_pmic_id:
+	regmap_del_irq_chip(max77843->irq, max77843->irq_data);
+
+	return ret;
+}
+
+static int max77843_remove(struct i2c_client *i2c)
+{
+	struct max77843 *max77843 = i2c_get_clientdata(i2c);
+
+	mfd_remove_devices(max77843->dev);
+
+	regmap_del_irq_chip(max77843->irq, max77843->irq_data);
+
+	i2c_unregister_device(max77843->i2c_chg);
+
+	return 0;
+}
+
+static const struct of_device_id max77843_dt_match[] = {
+	{ .compatible = "maxim,max77843", },
+	{ },
+};
+
+static const struct i2c_device_id max77843_id[] = {
+	{ "max77843", },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, max77843_id);
+
+static int __maybe_unused max77843_suspend(struct device *dev)
+{
+	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct max77843 *max77843 = i2c_get_clientdata(i2c);
+
+	disable_irq(max77843->irq);
+	if (device_may_wakeup(dev))
+		enable_irq_wake(max77843->irq);
+
+	return 0;
+}
+
+static int __maybe_unused max77843_resume(struct device *dev)
+{
+	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct max77843 *max77843 = i2c_get_clientdata(i2c);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(max77843->irq);
+	enable_irq(max77843->irq);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(max77843_pm, max77843_suspend, max77843_resume);
+
+static struct i2c_driver max77843_i2c_driver = {
+	.driver	= {
+		.name = "max77843",
+		.pm = &max77843_pm,
+		.of_match_table = max77843_dt_match,
+	},
+	.probe = max77843_probe,
+	.remove = max77843_remove,
+	.id_table = max77843_id,
+};
+
+static int __init max77843_i2c_init(void)
+{
+	return i2c_add_driver(&max77843_i2c_driver);
+}
+subsys_initcall(max77843_i2c_init);
+
+static void __exit max77843_i2c_exit(void)
+{
+	i2c_del_driver(&max77843_i2c_driver);
+}
+module_exit(max77843_i2c_exit);