Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (362 commits)
  V4L-DVB: cx88-dvb: remove extra attribution for core
  V4L/DVB: v4l: soc_camera: fix bound checking of mbus_fmt[] index
  V4L/DVB: Add support for SMT7020 to cx88
  V4L/DVB: radio-si470x: Use UTF-8 encoding on a comment
  V4L/DVB: MAINTAINERS: Telegent tlg2300 section fix
  V4L/DVB: gspca_stv06xx: Add support for camera button
  V4L/DVB: gspca_ov519: add support for the button on ov511 based cams
  V4L/DVB: gspca_ov519: Add support for the button on ov518 based cams
  V4L/DVB: gspca_ov519: add support for the button on ov519 based cams
  V4L/DVB: gspca_main: Fix a compile error when CONFIG_INPUT is not set
  V4L/DVB: gspca_main: some input error handling fixes
  V4L/DVB: gspca_main: Allow use of input device creation code for non int. inputs
  V4L/DVB: gspca_pac7302: much improved exposure control
  V4L/DVB: gspca_sonixb: Make sonixb driver handle pas106 and pas202 cameras
  V4L/DVB: gspca_sonixb: pas106: fixup bright ctrl and add gain and exposure ctrls
  V4L/DVB: Documentation: gspca.txt: update known mr97310a cams
  V4L/DVB: gspca_mr97310a: add support for the Sakar 1638x CyberPix
  V4L/DVB: gscpa_sonixb: limit ov7630 max framerate at 640x480
  V4L/DVB: gspca_sonixb: pas202: fixup brightness ctrl and add gain and exposure ctrls
  V4L/DVB: gscpa_sonixb: Differentiate between sensors with a coarse and fine expo ctrl
  ...

1 files changed, 130 insertions, 0 deletions

diff --git a/drivers/mfd/timberdale.h b/drivers/mfd/timberdale.h
new file mode 100644
index 000000000000..8d27ffabc25d
--- /dev/null
+++ b/drivers/mfd/timberdale.h
@@ -0,0 +1,130 @@
+/*
+ * timberdale.h timberdale FPGA MFD driver defines
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Timberdale FPGA
+ */
+
+#ifndef MFD_TIMBERDALE_H
+#define MFD_TIMBERDALE_H
+
+#define DRV_VERSION		"0.1"
+
+/* This driver only support versions >= 3.8 and < 4.0  */
+#define TIMB_SUPPORTED_MAJOR	3
+
+/* This driver only support minor >= 8 */
+#define TIMB_REQUIRED_MINOR	8
+
+/* Registers of the control area */
+#define TIMB_REV_MAJOR	0x00
+#define TIMB_REV_MINOR	0x04
+#define TIMB_HW_CONFIG	0x08
+#define TIMB_SW_RST	0x40
+
+/* bits in the TIMB_HW_CONFIG register */
+#define TIMB_HW_CONFIG_SPI_8BIT	0x80
+
+#define TIMB_HW_VER_MASK	0x0f
+#define TIMB_HW_VER0		0x00
+#define TIMB_HW_VER1		0x01
+#define TIMB_HW_VER2		0x02
+#define TIMB_HW_VER3		0x03
+
+#define OCORESOFFSET	0x0
+#define OCORESEND	0x1f
+
+#define SPIOFFSET	0x80
+#define SPIEND		0xff
+
+#define UARTLITEOFFSET	0x100
+#define UARTLITEEND	0x10f
+
+#define RDSOFFSET	0x180
+#define RDSEND		0x183
+
+#define ETHOFFSET	0x300
+#define ETHEND		0x3ff
+
+#define GPIOOFFSET	0x400
+#define GPIOEND		0x7ff
+
+#define CHIPCTLOFFSET	0x800
+#define CHIPCTLEND	0x8ff
+#define CHIPCTLSIZE	(CHIPCTLEND - CHIPCTLOFFSET)
+
+#define INTCOFFSET	0xc00
+#define INTCEND		0xfff
+#define INTCSIZE	(INTCEND - INTCOFFSET)
+
+#define MOSTOFFSET	0x1000
+#define MOSTEND		0x13ff
+
+#define UARTOFFSET	0x1400
+#define UARTEND		0x17ff
+
+#define XIICOFFSET	0x1800
+#define XIICEND		0x19ff
+
+#define I2SOFFSET	0x1C00
+#define I2SEND		0x1fff
+
+#define LOGIWOFFSET	0x30000
+#define LOGIWEND	0x37fff
+
+#define MLCOREOFFSET	0x40000
+#define MLCOREEND	0x43fff
+
+#define DMAOFFSET	0x01000000
+#define DMAEND		0x013fffff
+
+/* SDHC0 is placed in PCI bar 1 */
+#define SDHC0OFFSET	0x00
+#define SDHC0END	0xff
+
+/* SDHC1 is placed in PCI bar 2 */
+#define SDHC1OFFSET	0x00
+#define SDHC1END	0xff
+
+#define PCI_VENDOR_ID_TIMB	0x10ee
+#define PCI_DEVICE_ID_TIMB	0xa123
+
+#define IRQ_TIMBERDALE_INIC		0
+#define IRQ_TIMBERDALE_MLB		1
+#define IRQ_TIMBERDALE_GPIO		2
+#define IRQ_TIMBERDALE_I2C		3
+#define IRQ_TIMBERDALE_UART		4
+#define IRQ_TIMBERDALE_DMA		5
+#define IRQ_TIMBERDALE_I2S		6
+#define IRQ_TIMBERDALE_TSC_INT		7
+#define IRQ_TIMBERDALE_SDHC		8
+#define IRQ_TIMBERDALE_ADV7180		9
+#define IRQ_TIMBERDALE_ETHSW_IF		10
+#define IRQ_TIMBERDALE_SPI		11
+#define IRQ_TIMBERDALE_UARTLITE		12
+#define IRQ_TIMBERDALE_MLCORE		13
+#define IRQ_TIMBERDALE_MLCORE_BUF	14
+#define IRQ_TIMBERDALE_RDS		15
+#define TIMBERDALE_NR_IRQS		16
+
+#define GPIO_PIN_ASCB		8
+#define GPIO_PIN_INIC_RST	14
+#define GPIO_PIN_BT_RST		15
+#define GPIO_NR_PINS		16
+
+#endif