diff options
| author | Shawn Nematbakhsh <shawnn@chromium.org> | 2017-09-27 14:35:27 -0700 |
|---|---|---|
| committer | Lee Jones <lee.jones@linaro.org> | 2017-11-29 16:29:46 +0000 |
| commit | 001dde9400d5c3e9e2ce2abe06c1efa70a25dfde (patch) | |
| tree | a317ce7d796cb9896ebf94b1bfc51a832c156e68 /drivers/mfd | |
| parent | 85e9b13cbb130a3209f21bd7933933399c389ffe (diff) | |
mfd: cros ec: spi: Fix "in progress" error signaling
For host commands that take a long time to process, cros ec can return
early by signaling a EC_RES_IN_PROGRESS result. The host must then poll
status with EC_CMD_GET_COMMS_STATUS until completion of the command.
None of the above applies when data link errors are encountered. When
errors such as EC_SPI_PAST_END are encountered during command
transmission, it usually means the command was not received by the EC.
Treating such errors as if they were 'EC_RES_IN_PROGRESS' results is
almost always the wrong decision, and can result in host commands
silently being lost.
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Diffstat (limited to 'drivers/mfd')
| -rw-r--r-- | drivers/mfd/cros_ec_spi.c | 52 |
1 files changed, 24 insertions, 28 deletions
diff --git a/drivers/mfd/cros_ec_spi.c b/drivers/mfd/cros_ec_spi.c index a14196e95e9b..59c82cdcf48d 100644 --- a/drivers/mfd/cros_ec_spi.c +++ b/drivers/mfd/cros_ec_spi.c @@ -377,6 +377,7 @@ static int cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev, u8 *ptr; u8 *rx_buf; u8 sum; + u8 rx_byte; int ret = 0, final_ret; len = cros_ec_prepare_tx(ec_dev, ec_msg); @@ -421,25 +422,22 @@ static int cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev, if (!ret) { /* Verify that EC can process command */ for (i = 0; i < len; i++) { - switch (rx_buf[i]) { - case EC_SPI_PAST_END: - case EC_SPI_RX_BAD_DATA: - case EC_SPI_NOT_READY: - ret = -EAGAIN; - ec_msg->result = EC_RES_IN_PROGRESS; - default: + rx_byte = rx_buf[i]; + if (rx_byte == EC_SPI_PAST_END || + rx_byte == EC_SPI_RX_BAD_DATA || + rx_byte == EC_SPI_NOT_READY) { + ret = -EREMOTEIO; break; } - if (ret) - break; } - if (!ret) - ret = cros_ec_spi_receive_packet(ec_dev, - ec_msg->insize + sizeof(*response)); - } else { - dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret); } + if (!ret) + ret = cros_ec_spi_receive_packet(ec_dev, + ec_msg->insize + sizeof(*response)); + else + dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret); + final_ret = terminate_request(ec_dev); spi_bus_unlock(ec_spi->spi->master); @@ -508,6 +506,7 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev, int i, len; u8 *ptr; u8 *rx_buf; + u8 rx_byte; int sum; int ret = 0, final_ret; @@ -544,25 +543,22 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev, if (!ret) { /* Verify that EC can process command */ for (i = 0; i < len; i++) { - switch (rx_buf[i]) { - case EC_SPI_PAST_END: - case EC_SPI_RX_BAD_DATA: - case EC_SPI_NOT_READY: - ret = -EAGAIN; - ec_msg->result = EC_RES_IN_PROGRESS; - default: + rx_byte = rx_buf[i]; + if (rx_byte == EC_SPI_PAST_END || + rx_byte == EC_SPI_RX_BAD_DATA || + rx_byte == EC_SPI_NOT_READY) { + ret = -EREMOTEIO; break; } - if (ret) - break; } - if (!ret) - ret = cros_ec_spi_receive_response(ec_dev, - ec_msg->insize + EC_MSG_TX_PROTO_BYTES); - } else { - dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret); } + if (!ret) + ret = cros_ec_spi_receive_response(ec_dev, + ec_msg->insize + EC_MSG_TX_PROTO_BYTES); + else + dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret); + final_ret = terminate_request(ec_dev); spi_bus_unlock(ec_spi->spi->master); |