diff options
| author | Stefan Agner <stefan@agner.ch> | 2018-12-21 14:46:32 +0100 |
|---|---|---|
| committer | Marcel Ziswiler <marcel.ziswiler@toradex.com> | 2020-04-15 01:24:38 +0200 |
| commit | 615b1dcc8a2d05c374a56a7b11acb8ceca0d59b2 (patch) | |
| tree | 6dd696e37255887fddfee780a7b0dbfb2d4a7f85 /drivers/mfd | |
| parent | 140bcd716dd2b10e5b2facf23c27fe8c090d7154 (diff) | |
mfd: stmpe: Preparations for STMPE ADC driver
This prepares the MFD for the STMPE ADC driver. This commit introduces
devicetree settings that are used by the ADC and adds an init function.
Common ADC settings that are shared with the touchscreen driver can now
reside in the overlying MFD.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
(cherry-picked from commit 6377cfa3b857ced301f2079ac97de6c19057ab65)
Diffstat (limited to 'drivers/mfd')
| -rw-r--r-- | drivers/mfd/Kconfig | 3 | ||||
| -rw-r--r-- | drivers/mfd/stmpe.c | 41 |
2 files changed, 43 insertions, 1 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 07ab86a3a318..e5d22b6976a7 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1065,7 +1065,7 @@ config MFD_STMPE Currently supported devices are: - STMPE811: GPIO, Touchscreen + STMPE811: GPIO, Touchscreen, ADC STMPE1601: GPIO, Keypad STMPE1801: GPIO, Keypad STMPE2401: GPIO, Keypad @@ -1078,6 +1078,7 @@ config MFD_STMPE GPIO: stmpe-gpio Keypad: stmpe-keypad Touchscreen: stmpe-ts + ADC: stmpe-adc menu "STMicroelectronics STMPE Interface Drivers" depends on MFD_STMPE diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index 6d4458c8e6ab..d8b360147b46 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -546,6 +546,35 @@ static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks, enable ? 0 : mask); } +int stmpe811_adc_common_init(struct stmpe *stmpe) +{ + int ret; + u8 adc_ctrl1, adc_ctrl1_mask; + + adc_ctrl1 = STMPE_SAMPLE_TIME(stmpe->sample_time) | + STMPE_MOD_12B(stmpe->mod_12b) | + STMPE_REF_SEL(stmpe->ref_sel); + adc_ctrl1_mask = STMPE_SAMPLE_TIME(0xff) | STMPE_MOD_12B(0xff) | + STMPE_REF_SEL(0xff); + + ret = stmpe_set_bits(stmpe, STMPE811_REG_ADC_CTRL1, + adc_ctrl1_mask, adc_ctrl1); + if (ret) { + dev_err(stmpe->dev, "Could not setup ADC\n"); + return ret; + } + + ret = stmpe_set_bits(stmpe, STMPE811_REG_ADC_CTRL2, + STMPE_ADC_FREQ(0xff), STMPE_ADC_FREQ(stmpe->adc_freq)); + if (ret) { + dev_err(stmpe->dev, "Could not setup ADC\n"); + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(stmpe811_adc_common_init); + static int stmpe811_get_altfunc(struct stmpe *stmpe, enum stmpe_block block) { /* 0 for touchscreen, 1 for GPIO */ @@ -1335,6 +1364,7 @@ int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum) struct device_node *np = ci->dev->of_node; struct stmpe *stmpe; int ret; + u32 val; pdata = devm_kzalloc(ci->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) @@ -1368,6 +1398,15 @@ int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum) } } + if (!of_property_read_u32(np, "st,sample-time", &val)) + stmpe->sample_time = val; + if (!of_property_read_u32(np, "st,mod-12b", &val)) + stmpe->mod_12b = val; + if (!of_property_read_u32(np, "st,ref-sel", &val)) + stmpe->ref_sel = val; + if (!of_property_read_u32(np, "st,adc-freq", &val)) + stmpe->adc_freq = val; + stmpe->dev = ci->dev; stmpe->client = ci->client; stmpe->pdata = pdata; @@ -1459,6 +1498,8 @@ int stmpe_remove(struct stmpe *stmpe) if (!IS_ERR(stmpe->vcc)) regulator_disable(stmpe->vcc); + __stmpe_disable(stmpe, STMPE_BLOCK_ADC); + mfd_remove_devices(stmpe->dev); return 0; |