mfd: twl4030-madc: Move driver to drivers/iio/adc

This is a driver for an A/D converter, which belongs into
drivers/iio/adc.

Signed-off-by: Sebastian Reichel <sre@debian.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

3 files changed, 0 insertions, 907 deletions

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 49bb445d846a..23a8a51f6860 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -935,16 +935,6 @@ config TWL4030_CORE
 	  high speed USB OTG transceiver, an audio codec (on most
 	  versions) and many other features.
 
-config TWL4030_MADC
-	tristate "TI TWL4030 MADC"
-	depends on TWL4030_CORE
-	help
-	This driver provides support for triton TWL4030-MADC. The
-	driver supports both RT and SW conversion methods.
-
-	This driver can be built as a module. If so it will be
-	named twl4030-madc
-
 config TWL4030_POWER
 	bool "TI TWL4030 power resources"
 	depends on TWL4030_CORE && ARM
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 5aea5ef0a62f..c8eb0bcf4da0 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -71,7 +71,6 @@ obj-$(CONFIG_MFD_TPS80031)	+= tps80031.o
 obj-$(CONFIG_MENELAUS)		+= menelaus.o
 
 obj-$(CONFIG_TWL4030_CORE)	+= twl-core.o twl4030-irq.o twl6030-irq.o
-obj-$(CONFIG_TWL4030_MADC)      += twl4030-madc.o
 obj-$(CONFIG_TWL4030_POWER)    += twl4030-power.o
 obj-$(CONFIG_MFD_TWL4030_AUDIO)	+= twl4030-audio.o
 obj-$(CONFIG_TWL6040_CORE)	+= twl6040.o
diff --git a/drivers/mfd/twl4030-madc.c b/drivers/mfd/twl4030-madc.c
deleted file mode 100644
index 8a014fbb98bc..000000000000
--- a/drivers/mfd/twl4030-madc.c
+++ /dev/null
@@ -1,896 +0,0 @@
-/*
- *
- * TWL4030 MADC module driver-This driver monitors the real time
- * conversion of analog signals like battery temperature,
- * battery type, battery level etc.
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- * J Keerthy <j-keerthy@ti.com>
- *
- * Based on twl4030-madc.c
- * Copyright (C) 2008 Nokia Corporation
- * Mikko Ylinen <mikko.k.ylinen@nokia.com>
- *
- * Amit Kucheria <amit.kucheria@canonical.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/i2c/twl.h>
-#include <linux/i2c/twl4030-madc.h>
-#include <linux/module.h>
-#include <linux/stddef.h>
-#include <linux/mutex.h>
-#include <linux/bitops.h>
-#include <linux/jiffies.h>
-#include <linux/types.h>
-#include <linux/gfp.h>
-#include <linux/err.h>
-
-#include <linux/iio/iio.h>
-
-/**
- * struct twl4030_madc_data - a container for madc info
- * @dev:		Pointer to device structure for madc
- * @lock:		Mutex protecting this data structure
- * @requests:		Array of request struct corresponding to SW1, SW2 and RT
- * @use_second_irq:	IRQ selection (main or co-processor)
- * @imr:		Interrupt mask register of MADC
- * @isr:		Interrupt status register of MADC
- */
-struct twl4030_madc_data {
-	struct device *dev;
-	struct mutex lock;	/* mutex protecting this data structure */
-	struct twl4030_madc_request requests[TWL4030_MADC_NUM_METHODS];
-	bool use_second_irq;
-	u8 imr;
-	u8 isr;
-};
-
-static int twl4030_madc_read(struct iio_dev *iio_dev,
-			     const struct iio_chan_spec *chan,
-			     int *val, int *val2, long mask)
-{
-	struct twl4030_madc_data *madc = iio_priv(iio_dev);
-	struct twl4030_madc_request req;
-	int ret;
-
-	req.method = madc->use_second_irq ? TWL4030_MADC_SW2 : TWL4030_MADC_SW1;
-
-	req.channels = BIT(chan->channel);
-	req.active = false;
-	req.func_cb = NULL;
-	req.type = TWL4030_MADC_WAIT;
-	req.raw = !(mask == IIO_CHAN_INFO_PROCESSED);
-	req.do_avg = (mask == IIO_CHAN_INFO_AVERAGE_RAW);
-
-	ret = twl4030_madc_conversion(&req);
-	if (ret < 0)
-		return ret;
-
-	*val = req.rbuf[chan->channel];
-
-	return IIO_VAL_INT;
-}
-
-static const struct iio_info twl4030_madc_iio_info = {
-	.read_raw = &twl4030_madc_read,
-	.driver_module = THIS_MODULE,
-};
-
-#define TWL4030_ADC_CHANNEL(_channel, _type, _name) {	\
-	.type = _type,					\
-	.channel = _channel,				\
-	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |  \
-			      BIT(IIO_CHAN_INFO_AVERAGE_RAW) | \
-			      BIT(IIO_CHAN_INFO_PROCESSED), \
-	.datasheet_name = _name,			\
-	.indexed = 1,					\
-}
-
-static const struct iio_chan_spec twl4030_madc_iio_channels[] = {
-	TWL4030_ADC_CHANNEL(0, IIO_VOLTAGE, "ADCIN0"),
-	TWL4030_ADC_CHANNEL(1, IIO_TEMP, "ADCIN1"),
-	TWL4030_ADC_CHANNEL(2, IIO_VOLTAGE, "ADCIN2"),
-	TWL4030_ADC_CHANNEL(3, IIO_VOLTAGE, "ADCIN3"),
-	TWL4030_ADC_CHANNEL(4, IIO_VOLTAGE, "ADCIN4"),
-	TWL4030_ADC_CHANNEL(5, IIO_VOLTAGE, "ADCIN5"),
-	TWL4030_ADC_CHANNEL(6, IIO_VOLTAGE, "ADCIN6"),
-	TWL4030_ADC_CHANNEL(7, IIO_VOLTAGE, "ADCIN7"),
-	TWL4030_ADC_CHANNEL(8, IIO_VOLTAGE, "ADCIN8"),
-	TWL4030_ADC_CHANNEL(9, IIO_VOLTAGE, "ADCIN9"),
-	TWL4030_ADC_CHANNEL(10, IIO_CURRENT, "ADCIN10"),
-	TWL4030_ADC_CHANNEL(11, IIO_VOLTAGE, "ADCIN11"),
-	TWL4030_ADC_CHANNEL(12, IIO_VOLTAGE, "ADCIN12"),
-	TWL4030_ADC_CHANNEL(13, IIO_VOLTAGE, "ADCIN13"),
-	TWL4030_ADC_CHANNEL(14, IIO_VOLTAGE, "ADCIN14"),
-	TWL4030_ADC_CHANNEL(15, IIO_VOLTAGE, "ADCIN15"),
-};
-
-static struct twl4030_madc_data *twl4030_madc;
-
-struct twl4030_prescale_divider_ratios {
-	s16 numerator;
-	s16 denominator;
-};
-
-static const struct twl4030_prescale_divider_ratios
-twl4030_divider_ratios[16] = {
-	{1, 1},		/* CHANNEL 0 No Prescaler */
-	{1, 1},		/* CHANNEL 1 No Prescaler */
-	{6, 10},	/* CHANNEL 2 */
-	{6, 10},	/* CHANNEL 3 */
-	{6, 10},	/* CHANNEL 4 */
-	{6, 10},	/* CHANNEL 5 */
-	{6, 10},	/* CHANNEL 6 */
-	{6, 10},	/* CHANNEL 7 */
-	{3, 14},	/* CHANNEL 8 */
-	{1, 3},		/* CHANNEL 9 */
-	{1, 1},		/* CHANNEL 10 No Prescaler */
-	{15, 100},	/* CHANNEL 11 */
-	{1, 4},		/* CHANNEL 12 */
-	{1, 1},		/* CHANNEL 13 Reserved channels */
-	{1, 1},		/* CHANNEL 14 Reseved channels */
-	{5, 11},	/* CHANNEL 15 */
-};
-
-
-/* Conversion table from -3 to 55 degrees Celcius */
-static int twl4030_therm_tbl[] = {
-	30800,	29500,	28300,	27100,
-	26000,	24900,	23900,	22900,	22000,	21100,	20300,	19400,	18700,
-	17900,	17200,	16500,	15900,	15300,	14700,	14100,	13600,	13100,
-	12600,	12100,	11600,	11200,	10800,	10400,	10000,	9630,	9280,
-	8950,	8620,	8310,	8020,	7730,	7460,	7200,	6950,	6710,
-	6470,	6250,	6040,	5830,	5640,	5450,	5260,	5090,	4920,
-	4760,	4600,	4450,	4310,	4170,	4040,	3910,	3790,	3670,
-	3550
-};
-
-/*
- * Structure containing the registers
- * of different conversion methods supported by MADC.
- * Hardware or RT real time conversion request initiated by external host
- * processor for RT Signal conversions.
- * External host processors can also request for non RT conversions
- * SW1 and SW2 software conversions also called asynchronous or GPC request.
- */
-static
-const struct twl4030_madc_conversion_method twl4030_conversion_methods[] = {
-	[TWL4030_MADC_RT] = {
-			     .sel = TWL4030_MADC_RTSELECT_LSB,
-			     .avg = TWL4030_MADC_RTAVERAGE_LSB,
-			     .rbase = TWL4030_MADC_RTCH0_LSB,
-			     },
-	[TWL4030_MADC_SW1] = {
-			      .sel = TWL4030_MADC_SW1SELECT_LSB,
-			      .avg = TWL4030_MADC_SW1AVERAGE_LSB,
-			      .rbase = TWL4030_MADC_GPCH0_LSB,
-			      .ctrl = TWL4030_MADC_CTRL_SW1,
-			      },
-	[TWL4030_MADC_SW2] = {
-			      .sel = TWL4030_MADC_SW2SELECT_LSB,
-			      .avg = TWL4030_MADC_SW2AVERAGE_LSB,
-			      .rbase = TWL4030_MADC_GPCH0_LSB,
-			      .ctrl = TWL4030_MADC_CTRL_SW2,
-			      },
-};
-
-/**
- * twl4030_madc_channel_raw_read() - Function to read a particular channel value
- * @madc:	pointer to struct twl4030_madc_data
- * @reg:	lsb of ADC Channel
- *
- * Return: 0 on success, an error code otherwise.
- */
-static int twl4030_madc_channel_raw_read(struct twl4030_madc_data *madc, u8 reg)
-{
-	u16 val;
-	int ret;
-	/*
-	 * For each ADC channel, we have MSB and LSB register pair. MSB address
-	 * is always LSB address+1. reg parameter is the address of LSB register
-	 */
-	ret = twl_i2c_read_u16(TWL4030_MODULE_MADC, &val, reg);
-	if (ret) {
-		dev_err(madc->dev, "unable to read register 0x%X\n", reg);
-		return ret;
-	}
-
-	return (int)(val >> 6);
-}
-
-/*
- * Return battery temperature in degrees Celsius
- * Or < 0 on failure.
- */
-static int twl4030battery_temperature(int raw_volt)
-{
-	u8 val;
-	int temp, curr, volt, res, ret;
-
-	volt = (raw_volt * TEMP_STEP_SIZE) / TEMP_PSR_R;
-	/* Getting and calculating the supply current in micro amperes */
-	ret = twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE, &val,
-		REG_BCICTL2);
-	if (ret < 0)
-		return ret;
-
-	curr = ((val & TWL4030_BCI_ITHEN) + 1) * 10;
-	/* Getting and calculating the thermistor resistance in ohms */
-	res = volt * 1000 / curr;
-	/* calculating temperature */
-	for (temp = 58; temp >= 0; temp--) {
-		int actual = twl4030_therm_tbl[temp];
-		if ((actual - res) >= 0)
-			break;
-	}
-
-	return temp + 1;
-}
-
-static int twl4030battery_current(int raw_volt)
-{
-	int ret;
-	u8 val;
-
-	ret = twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE, &val,
-		TWL4030_BCI_BCICTL1);
-	if (ret)
-		return ret;
-	if (val & TWL4030_BCI_CGAIN) /* slope of 0.44 mV/mA */
-		return (raw_volt * CURR_STEP_SIZE) / CURR_PSR_R1;
-	else /* slope of 0.88 mV/mA */
-		return (raw_volt * CURR_STEP_SIZE) / CURR_PSR_R2;
-}
-
-/*
- * Function to read channel values
- * @madc - pointer to twl4030_madc_data struct
- * @reg_base - Base address of the first channel
- * @Channels - 16 bit bitmap. If the bit is set, channel's value is read
- * @buf - The channel values are stored here. if read fails error
- * @raw - Return raw values without conversion
- * value is stored
- * Returns the number of successfully read channels.
- */
-static int twl4030_madc_read_channels(struct twl4030_madc_data *madc,
-				      u8 reg_base, unsigned
-				      long channels, int *buf,
-				      bool raw)
-{
-	int count = 0;
-	int i;
-	u8 reg;
-
-	for_each_set_bit(i, &channels, TWL4030_MADC_MAX_CHANNELS) {
-		reg = reg_base + (2 * i);
-		buf[i] = twl4030_madc_channel_raw_read(madc, reg);
-		if (buf[i] < 0) {
-			dev_err(madc->dev, "Unable to read register 0x%X\n",
-				reg);
-			return buf[i];
-		}
-		if (raw) {
-			count++;
-			continue;
-		}
-		switch (i) {
-		case 10:
-			buf[i] = twl4030battery_current(buf[i]);
-			if (buf[i] < 0) {
-				dev_err(madc->dev, "err reading current\n");
-				return buf[i];
-			} else {
-				count++;
-				buf[i] = buf[i] - 750;
-			}
-			break;
-		case 1:
-			buf[i] = twl4030battery_temperature(buf[i]);
-			if (buf[i] < 0) {
-				dev_err(madc->dev, "err reading temperature\n");
-				return buf[i];
-			} else {
-				buf[i] -= 3;
-				count++;
-			}
-			break;
-		default:
-			count++;
-			/* Analog Input (V) = conv_result * step_size / R
-			 * conv_result = decimal value of 10-bit conversion
-			 *		 result
-			 * step size = 1.5 / (2 ^ 10 -1)
-			 * R = Prescaler ratio for input channels.
-			 * Result given in mV hence multiplied by 1000.
-			 */
-			buf[i] = (buf[i] * 3 * 1000 *
-				 twl4030_divider_ratios[i].denominator)
-				/ (2 * 1023 *
-				twl4030_divider_ratios[i].numerator);
-		}
-	}
-
-	return count;
-}
-
-/*
- * Enables irq.
- * @madc - pointer to twl4030_madc_data struct
- * @id - irq number to be enabled
- * can take one of TWL4030_MADC_RT, TWL4030_MADC_SW1, TWL4030_MADC_SW2
- * corresponding to RT, SW1, SW2 conversion requests.
- * If the i2c read fails it returns an error else returns 0.
- */
-static int twl4030_madc_enable_irq(struct twl4030_madc_data *madc, u8 id)
-{
-	u8 val;
-	int ret;
-
-	ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &val, madc->imr);
-	if (ret) {
-		dev_err(madc->dev, "unable to read imr register 0x%X\n",
-			madc->imr);
-		return ret;
-	}
-
-	val &= ~(1 << id);
-	ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, val, madc->imr);
-	if (ret) {
-		dev_err(madc->dev,
-			"unable to write imr register 0x%X\n", madc->imr);
-		return ret;
-	}
-
-	return 0;
-}
-
-/*
- * Disables irq.
- * @madc - pointer to twl4030_madc_data struct
- * @id - irq number to be disabled
- * can take one of TWL4030_MADC_RT, TWL4030_MADC_SW1, TWL4030_MADC_SW2
- * corresponding to RT, SW1, SW2 conversion requests.
- * Returns error if i2c read/write fails.
- */
-static int twl4030_madc_disable_irq(struct twl4030_madc_data *madc, u8 id)
-{
-	u8 val;
-	int ret;
-
-	ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &val, madc->imr);
-	if (ret) {
-		dev_err(madc->dev, "unable to read imr register 0x%X\n",
-			madc->imr);
-		return ret;
-	}
-	val |= (1 << id);
-	ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, val, madc->imr);
-	if (ret) {
-		dev_err(madc->dev,
-			"unable to write imr register 0x%X\n", madc->imr);
-		return ret;
-	}
-
-	return 0;
-}
-
-static irqreturn_t twl4030_madc_threaded_irq_handler(int irq, void *_madc)
-{
-	struct twl4030_madc_data *madc = _madc;
-	const struct twl4030_madc_conversion_method *method;
-	u8 isr_val, imr_val;
-	int i, len, ret;
-	struct twl4030_madc_request *r;
-
-	mutex_lock(&madc->lock);
-	ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &isr_val, madc->isr);
-	if (ret) {
-		dev_err(madc->dev, "unable to read isr register 0x%X\n",
-			madc->isr);
-		goto err_i2c;
-	}
-	ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &imr_val, madc->imr);
-	if (ret) {
-		dev_err(madc->dev, "unable to read imr register 0x%X\n",
-			madc->imr);
-		goto err_i2c;
-	}
-	isr_val &= ~imr_val;
-	for (i = 0; i < TWL4030_MADC_NUM_METHODS; i++) {
-		if (!(isr_val & (1 << i)))
-			continue;
-		ret = twl4030_madc_disable_irq(madc, i);
-		if (ret < 0)
-			dev_dbg(madc->dev, "Disable interrupt failed %d\n", i);
-		madc->requests[i].result_pending = 1;
-	}
-	for (i = 0; i < TWL4030_MADC_NUM_METHODS; i++) {
-		r = &madc->requests[i];
-		/* No pending results for this method, move to next one */
-		if (!r->result_pending)
-			continue;
-		method = &twl4030_conversion_methods[r->method];
-		/* Read results */
-		len = twl4030_madc_read_channels(madc, method->rbase,
-						 r->channels, r->rbuf, r->raw);
-		/* Return results to caller */
-		if (r->func_cb != NULL) {
-			r->func_cb(len, r->channels, r->rbuf);
-			r->func_cb = NULL;
-		}
-		/* Free request */
-		r->result_pending = 0;
-		r->active = 0;
-	}
-	mutex_unlock(&madc->lock);
-
-	return IRQ_HANDLED;
-
-err_i2c:
-	/*
-	 * In case of error check whichever request is active
-	 * and service the same.
-	 */
-	for (i = 0; i < TWL4030_MADC_NUM_METHODS; i++) {
-		r = &madc->requests[i];
-		if (r->active == 0)
-			continue;
-		method = &twl4030_conversion_methods[r->method];
-		/* Read results */
-		len = twl4030_madc_read_channels(madc, method->rbase,
-						 r->channels, r->rbuf, r->raw);
-		/* Return results to caller */
-		if (r->func_cb != NULL) {
-			r->func_cb(len, r->channels, r->rbuf);
-			r->func_cb = NULL;
-		}
-		/* Free request */
-		r->result_pending = 0;
-		r->active = 0;
-	}
-	mutex_unlock(&madc->lock);
-
-	return IRQ_HANDLED;
-}
-
-static int twl4030_madc_set_irq(struct twl4030_madc_data *madc,
-				struct twl4030_madc_request *req)
-{
-	struct twl4030_madc_request *p;
-	int ret;
-
-	p = &madc->requests[req->method];
-	memcpy(p, req, sizeof(*req));
-	ret = twl4030_madc_enable_irq(madc, req->method);
-	if (ret < 0) {
-		dev_err(madc->dev, "enable irq failed!!\n");
-		return ret;
-	}
-
-	return 0;
-}
-
-/*
- * Function which enables the madc conversion
- * by writing to the control register.
- * @madc - pointer to twl4030_madc_data struct
- * @conv_method - can be TWL4030_MADC_RT, TWL4030_MADC_SW2, TWL4030_MADC_SW1
- * corresponding to RT SW1 or SW2 conversion methods.
- * Returns 0 if succeeds else a negative error value
- */
-static int twl4030_madc_start_conversion(struct twl4030_madc_data *madc,
-					 int conv_method)
-{
-	const struct twl4030_madc_conversion_method *method;
-	int ret = 0;
-
-	if (conv_method != TWL4030_MADC_SW1 && conv_method != TWL4030_MADC_SW2)
-		return -ENOTSUPP;
-
-	method = &twl4030_conversion_methods[conv_method];
-	ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, TWL4030_MADC_SW_START,
-			       method->ctrl);
-	if (ret) {
-		dev_err(madc->dev, "unable to write ctrl register 0x%X\n",
-			method->ctrl);
-		return ret;
-	}
-
-	return 0;
-}
-
-/*
- * Function that waits for conversion to be ready
- * @madc - pointer to twl4030_madc_data struct
- * @timeout_ms - timeout value in milliseconds
- * @status_reg - ctrl register
- * returns 0 if succeeds else a negative error value
- */
-static int twl4030_madc_wait_conversion_ready(struct twl4030_madc_data *madc,
-					      unsigned int timeout_ms,
-					      u8 status_reg)
-{
-	unsigned long timeout;
-	int ret;
-
-	timeout = jiffies + msecs_to_jiffies(timeout_ms);
-	do {
-		u8 reg;
-
-		ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &reg, status_reg);
-		if (ret) {
-			dev_err(madc->dev,
-				"unable to read status register 0x%X\n",
-				status_reg);
-			return ret;
-		}
-		if (!(reg & TWL4030_MADC_BUSY) && (reg & TWL4030_MADC_EOC_SW))
-			return 0;
-		usleep_range(500, 2000);
-	} while (!time_after(jiffies, timeout));
-	dev_err(madc->dev, "conversion timeout!\n");
-
-	return -EAGAIN;
-}
-
-/*
- * An exported function which can be called from other kernel drivers.
- * @req twl4030_madc_request structure
- * req->rbuf will be filled with read values of channels based on the
- * channel index. If a particular channel reading fails there will
- * be a negative error value in the corresponding array element.
- * returns 0 if succeeds else error value
- */
-int twl4030_madc_conversion(struct twl4030_madc_request *req)
-{
-	const struct twl4030_madc_conversion_method *method;
-	int ret;
-
-	if (!req || !twl4030_madc)
-		return -EINVAL;
-
-	mutex_lock(&twl4030_madc->lock);
-	if (req->method < TWL4030_MADC_RT || req->method > TWL4030_MADC_SW2) {
-		ret = -EINVAL;
-		goto out;
-	}
-	/* Do we have a conversion request ongoing */
-	if (twl4030_madc->requests[req->method].active) {
-		ret = -EBUSY;
-		goto out;
-	}
-	method = &twl4030_conversion_methods[req->method];
-	/* Select channels to be converted */
-	ret = twl_i2c_write_u16(TWL4030_MODULE_MADC, req->channels, method->sel);
-	if (ret) {
-		dev_err(twl4030_madc->dev,
-			"unable to write sel register 0x%X\n", method->sel);
-		goto out;
-	}
-	/* Select averaging for all channels if do_avg is set */
-	if (req->do_avg) {
-		ret = twl_i2c_write_u16(TWL4030_MODULE_MADC, req->channels,
-				       method->avg);
-		if (ret) {
-			dev_err(twl4030_madc->dev,
-				"unable to write avg register 0x%X\n",
-				method->avg);
-			goto out;
-		}
-	}
-	if (req->type == TWL4030_MADC_IRQ_ONESHOT && req->func_cb != NULL) {
-		ret = twl4030_madc_set_irq(twl4030_madc, req);
-		if (ret < 0)
-			goto out;
-		ret = twl4030_madc_start_conversion(twl4030_madc, req->method);
-		if (ret < 0)
-			goto out;
-		twl4030_madc->requests[req->method].active = 1;
-		ret = 0;
-		goto out;
-	}
-	/* With RT method we should not be here anymore */
-	if (req->method == TWL4030_MADC_RT) {
-		ret = -EINVAL;
-		goto out;
-	}
-	ret = twl4030_madc_start_conversion(twl4030_madc, req->method);
-	if (ret < 0)
-		goto out;
-	twl4030_madc->requests[req->method].active = 1;
-	/* Wait until conversion is ready (ctrl register returns EOC) */
-	ret = twl4030_madc_wait_conversion_ready(twl4030_madc, 5, method->ctrl);
-	if (ret) {
-		twl4030_madc->requests[req->method].active = 0;
-		goto out;
-	}
-	ret = twl4030_madc_read_channels(twl4030_madc, method->rbase,
-					 req->channels, req->rbuf, req->raw);
-	twl4030_madc->requests[req->method].active = 0;
-
-out:
-	mutex_unlock(&twl4030_madc->lock);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(twl4030_madc_conversion);
-
-int twl4030_get_madc_conversion(int channel_no)
-{
-	struct twl4030_madc_request req;
-	int temp = 0;
-	int ret;
-
-	req.channels = (1 << channel_no);
-	req.method = TWL4030_MADC_SW2;
-	req.active = 0;
-	req.func_cb = NULL;
-	ret = twl4030_madc_conversion(&req);
-	if (ret < 0)
-		return ret;
-	if (req.rbuf[channel_no] > 0)
-		temp = req.rbuf[channel_no];
-
-	return temp;
-}
-EXPORT_SYMBOL_GPL(twl4030_get_madc_conversion);
-
-/**
- * twl4030_madc_set_current_generator() - setup bias current
- *
- * @madc:	pointer to twl4030_madc_data struct
- * @chan:	can be one of the two values:
- *		TWL4030_BCI_ITHEN
- *		Enables bias current for main battery type reading
- *		TWL4030_BCI_TYPEN
- *		Enables bias current for main battery temperature sensing
- * @on:		enable or disable chan.
- *
- * Function to enable or disable bias current for
- * main battery type reading or temperature sensing
- */
-static int twl4030_madc_set_current_generator(struct twl4030_madc_data *madc,
-					      int chan, int on)
-{
-	int ret;
-	int regmask;
-	u8 regval;
-
-	ret = twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE,
-			      &regval, TWL4030_BCI_BCICTL1);
-	if (ret) {
-		dev_err(madc->dev, "unable to read BCICTL1 reg 0x%X",
-			TWL4030_BCI_BCICTL1);
-		return ret;
-	}
-
-	regmask = chan ? TWL4030_BCI_ITHEN : TWL4030_BCI_TYPEN;
-	if (on)
-		regval |= regmask;
-	else
-		regval &= ~regmask;
-
-	ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
-			       regval, TWL4030_BCI_BCICTL1);
-	if (ret) {
-		dev_err(madc->dev, "unable to write BCICTL1 reg 0x%X\n",
-			TWL4030_BCI_BCICTL1);
-		return ret;
-	}
-
-	return 0;
-}
-
-/*
- * Function that sets MADC software power on bit to enable MADC
- * @madc - pointer to twl4030_madc_data struct
- * @on - Enable or disable MADC software power on bit.
- * returns error if i2c read/write fails else 0
- */
-static int twl4030_madc_set_power(struct twl4030_madc_data *madc, int on)
-{
-	u8 regval;
-	int ret;
-
-	ret = twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE,
-			      &regval, TWL4030_MADC_CTRL1);
-	if (ret) {
-		dev_err(madc->dev, "unable to read madc ctrl1 reg 0x%X\n",
-			TWL4030_MADC_CTRL1);
-		return ret;
-	}
-	if (on)
-		regval |= TWL4030_MADC_MADCON;
-	else
-		regval &= ~TWL4030_MADC_MADCON;
-	ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, regval, TWL4030_MADC_CTRL1);
-	if (ret) {
-		dev_err(madc->dev, "unable to write madc ctrl1 reg 0x%X\n",
-			TWL4030_MADC_CTRL1);
-		return ret;
-	}
-
-	return 0;
-}
-
-/*
- * Initialize MADC and request for threaded irq
- */
-static int twl4030_madc_probe(struct platform_device *pdev)
-{
-	struct twl4030_madc_data *madc;
-	struct twl4030_madc_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	struct device_node *np = pdev->dev.of_node;
-	int irq, ret;
-	u8 regval;
-	struct iio_dev *iio_dev = NULL;
-
-	if (!pdata && !np) {
-		dev_err(&pdev->dev, "neither platform data nor Device Tree node available\n");
-		return -EINVAL;
-	}
-
-	iio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*madc));
-	if (!iio_dev) {
-		dev_err(&pdev->dev, "failed allocating iio device\n");
-		return -ENOMEM;
-	}
-
-	madc = iio_priv(iio_dev);
-	madc->dev = &pdev->dev;
-
-	iio_dev->name = dev_name(&pdev->dev);
-	iio_dev->dev.parent = &pdev->dev;
-	iio_dev->dev.of_node = pdev->dev.of_node;
-	iio_dev->info = &twl4030_madc_iio_info;
-	iio_dev->modes = INDIO_DIRECT_MODE;
-	iio_dev->channels = twl4030_madc_iio_channels;
-	iio_dev->num_channels = ARRAY_SIZE(twl4030_madc_iio_channels);
-
-	/*
-	 * Phoenix provides 2 interrupt lines. The first one is connected to
-	 * the OMAP. The other one can be connected to the other processor such
-	 * as modem. Hence two separate ISR and IMR registers.
-	 */
-	if (pdata)
-		madc->use_second_irq = (pdata->irq_line != 1);
-	else
-		madc->use_second_irq = of_property_read_bool(np,
-				       "ti,system-uses-second-madc-irq");
-
-	madc->imr = madc->use_second_irq ? TWL4030_MADC_IMR2 :
-					   TWL4030_MADC_IMR1;
-	madc->isr = madc->use_second_irq ? TWL4030_MADC_ISR2 :
-					   TWL4030_MADC_ISR1;
-
-	ret = twl4030_madc_set_power(madc, 1);
-	if (ret < 0)
-		return ret;
-	ret = twl4030_madc_set_current_generator(madc, 0, 1);
-	if (ret < 0)
-		goto err_current_generator;
-
-	ret = twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE,
-			      &regval, TWL4030_BCI_BCICTL1);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to read reg BCI CTL1 0x%X\n",
-			TWL4030_BCI_BCICTL1);
-		goto err_i2c;
-	}
-	regval |= TWL4030_BCI_MESBAT;
-	ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
-			       regval, TWL4030_BCI_BCICTL1);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to write reg BCI Ctl1 0x%X\n",
-			TWL4030_BCI_BCICTL1);
-		goto err_i2c;
-	}
-
-	/* Check that MADC clock is on */
-	ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &regval, TWL4030_REG_GPBR1);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to read reg GPBR1 0x%X\n",
-				TWL4030_REG_GPBR1);
-		goto err_i2c;
-	}
-
-	/* If MADC clk is not on, turn it on */
-	if (!(regval & TWL4030_GPBR1_MADC_HFCLK_EN)) {
-		dev_info(&pdev->dev, "clk disabled, enabling\n");
-		regval |= TWL4030_GPBR1_MADC_HFCLK_EN;
-		ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, regval,
-				       TWL4030_REG_GPBR1);
-		if (ret) {
-			dev_err(&pdev->dev, "unable to write reg GPBR1 0x%X\n",
-					TWL4030_REG_GPBR1);
-			goto err_i2c;
-		}
-	}
-
-	platform_set_drvdata(pdev, iio_dev);
-	mutex_init(&madc->lock);
-
-	irq = platform_get_irq(pdev, 0);
-	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
-				   twl4030_madc_threaded_irq_handler,
-				   IRQF_TRIGGER_RISING, "twl4030_madc", madc);
-	if (ret) {
-		dev_err(&pdev->dev, "could not request irq\n");
-		goto err_i2c;
-	}
-	twl4030_madc = madc;
-
-	ret = iio_device_register(iio_dev);
-	if (ret) {
-		dev_err(&pdev->dev, "could not register iio device\n");
-		goto err_i2c;
-	}
-
-	return 0;
-
-err_i2c:
-	twl4030_madc_set_current_generator(madc, 0, 0);
-err_current_generator:
-	twl4030_madc_set_power(madc, 0);
-	return ret;
-}
-
-static int twl4030_madc_remove(struct platform_device *pdev)
-{
-	struct iio_dev *iio_dev = platform_get_drvdata(pdev);
-	struct twl4030_madc_data *madc = iio_priv(iio_dev);
-
-	iio_device_unregister(iio_dev);
-
-	twl4030_madc_set_current_generator(madc, 0, 0);
-	twl4030_madc_set_power(madc, 0);
-
-	return 0;
-}
-
-#ifdef CONFIG_OF
-static const struct of_device_id twl_madc_of_match[] = {
-	{ .compatible = "ti,twl4030-madc", },
-	{ },
-};
-MODULE_DEVICE_TABLE(of, twl_madc_of_match);
-#endif
-
-static struct platform_driver twl4030_madc_driver = {
-	.probe = twl4030_madc_probe,
-	.remove = twl4030_madc_remove,
-	.driver = {
-		   .name = "twl4030_madc",
-		   .owner = THIS_MODULE,
-		   .of_match_table = of_match_ptr(twl_madc_of_match),
-	},
-};
-
-module_platform_driver(twl4030_madc_driver);
-
-MODULE_DESCRIPTION("TWL4030 ADC driver");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("J Keerthy");
-MODULE_ALIAS("platform:twl4030_madc");