summaryrefslogtreecommitdiff
path: root/drivers/mmc/core/mmc_ops.c
diff options
context:
space:
mode:
authorUlf Hansson <ulf.hansson@linaro.org>2013-09-09 11:57:57 +0200
committerChris Ball <cjb@laptop.org>2013-10-30 20:26:24 -0400
commit878e200bbb1fbde9f21582decab95b178e5a3b83 (patch)
tree058fb92c1339c23c35d4771f07b8ad5f7ad22e3d /drivers/mmc/core/mmc_ops.c
parentd052068a0ba43273eb9cfe32460e9445ef75fdc5 (diff)
mmc: core: Do not poll for busy with status cmd for all switch cmds
Some switch operations like poweroff notify, shall according to the spec not be followed by any other new commands. For these cases and when the host does'nt support MMC_CAP_WAIT_WHILE_BUSY, we must not send status commands to poll for busy detection. Instead wait for the stated timeout from the EXT_CSD before completing the request. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
Diffstat (limited to 'drivers/mmc/core/mmc_ops.c')
-rw-r--r--drivers/mmc/core/mmc_ops.c23
1 files changed, 18 insertions, 5 deletions
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 37f7d7059ab7..aae8d8b45549 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -404,11 +404,12 @@ int mmc_spi_set_crc(struct mmc_host *host, int use_crc)
* @timeout_ms: timeout (ms) for operation performed by register write,
* timeout of zero implies maximum possible timeout
* @use_busy_signal: use the busy signal as response type
+ * @send_status: send status cmd to poll for busy
*
* Modifies the EXT_CSD register for selected card.
*/
int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
- unsigned int timeout_ms, bool use_busy_signal)
+ unsigned int timeout_ms, bool use_busy_signal, bool send_status)
{
int err;
struct mmc_command cmd = {0};
@@ -454,14 +455,26 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
timeout = jiffies + msecs_to_jiffies(MMC_OPS_TIMEOUT_MS);
do {
- err = __mmc_send_status(card, &status, ignore_crc);
- if (err)
- return err;
+ if (send_status) {
+ err = __mmc_send_status(card, &status, ignore_crc);
+ if (err)
+ return err;
+ }
if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
break;
if (mmc_host_is_spi(card->host))
break;
+ /*
+ * We are not allowed to issue a status command and the host
+ * does'nt support MMC_CAP_WAIT_WHILE_BUSY, then we can only
+ * rely on waiting for the stated timeout to be sufficient.
+ */
+ if (!send_status) {
+ mmc_delay(timeout_ms);
+ return 0;
+ }
+
/* Timeout if the device never leaves the program state. */
if (time_after(jiffies, timeout)) {
pr_err("%s: Card stuck in programming state! %s\n",
@@ -488,7 +501,7 @@ EXPORT_SYMBOL_GPL(__mmc_switch);
int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
unsigned int timeout_ms)
{
- return __mmc_switch(card, set, index, value, timeout_ms, true);
+ return __mmc_switch(card, set, index, value, timeout_ms, true, true);
}
EXPORT_SYMBOL_GPL(mmc_switch);