Merge tag 'cleanup-omap-tags-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

From Tony Lindgren:

Remove the ancient omap specific atags that are no longer needed.

At some point we were planning to pass the bootloader information
with custom atags that did not work out too well.

There's no need for these any longer as the kernel has been booting
fine without them for quite some time. And Now we have device tree
support that can be used instead.

* tag 'cleanup-omap-tags-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP: remove plat/board.h file
  ARM: OMAP: move debug_card_init() function
  ARM: OMAP1: move lcd pdata out of arch/arm/*
  ARM: OMAP1: move omap1_bl pdata out of arch/arm/*
  ARM: OMAP: remove the omap custom tags
  ARM: OMAP1: remove the crystal type tag parsing
  ARM: OMAP: remove the sti console workaround
  ARM: OMAP: omap3evm: cleanup revision bits
  ARM: OMAP: cleanup struct omap_board_config_kernel
  + sync to 3.6-rc5

1 files changed, 46 insertions, 39 deletions

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 72dc3cde646d..af40d227bece 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -627,6 +627,7 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot)
 {
 	struct dw_mci *host = slot->host;
 	u32 div;
+	u32 clk_en_a;
 
 	if (slot->clock != host->current_speed) {
 		div = host->bus_hz / slot->clock;
@@ -659,9 +660,11 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot)
 		mci_send_cmd(slot,
 			     SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0);
 
-		/* enable clock */
-		mci_writel(host, CLKENA, ((SDMMC_CLKEN_ENABLE |
-			   SDMMC_CLKEN_LOW_PWR) << slot->id));
+		/* enable clock; only low power if no SDIO */
+		clk_en_a = SDMMC_CLKEN_ENABLE << slot->id;
+		if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->id)))
+			clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id;
+		mci_writel(host, CLKENA, clk_en_a);
 
 		/* inform CIU */
 		mci_send_cmd(slot,
@@ -862,6 +865,30 @@ static int dw_mci_get_cd(struct mmc_host *mmc)
 	return present;
 }
 
+/*
+ * Disable lower power mode.
+ *
+ * Low power mode will stop the card clock when idle.  According to the
+ * description of the CLKENA register we should disable low power mode
+ * for SDIO cards if we need SDIO interrupts to work.
+ *
+ * This function is fast if low power mode is already disabled.
+ */
+static void dw_mci_disable_low_power(struct dw_mci_slot *slot)
+{
+	struct dw_mci *host = slot->host;
+	u32 clk_en_a;
+	const u32 clken_low_pwr = SDMMC_CLKEN_LOW_PWR << slot->id;
+
+	clk_en_a = mci_readl(host, CLKENA);
+
+	if (clk_en_a & clken_low_pwr) {
+		mci_writel(host, CLKENA, clk_en_a & ~clken_low_pwr);
+		mci_send_cmd(slot, SDMMC_CMD_UPD_CLK |
+			     SDMMC_CMD_PRV_DAT_WAIT, 0);
+	}
+}
+
 static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb)
 {
 	struct dw_mci_slot *slot = mmc_priv(mmc);
@@ -871,6 +898,14 @@ static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb)
 	/* Enable/disable Slot Specific SDIO interrupt */
 	int_mask = mci_readl(host, INTMASK);
 	if (enb) {
+		/*
+		 * Turn off low power mode if it was enabled.  This is a bit of
+		 * a heavy operation and we disable / enable IRQs a lot, so
+		 * we'll leave low power mode disabled and it will get
+		 * re-enabled again in dw_mci_setup_bus().
+		 */
+		dw_mci_disable_low_power(slot);
+
 		mci_writel(host, INTMASK,
 			   (int_mask | SDMMC_INT_SDIO(slot->id)));
 	} else {
@@ -1429,22 +1464,10 @@ static void dw_mci_read_data_pio(struct dw_mci *host)
 			nbytes += len;
 			remain -= len;
 		} while (remain);
-		sg_miter->consumed = offset;
 
+		sg_miter->consumed = offset;
 		status = mci_readl(host, MINTSTS);
 		mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
-		if (status & DW_MCI_DATA_ERROR_FLAGS) {
-			host->data_status = status;
-			data->bytes_xfered += nbytes;
-			sg_miter_stop(sg_miter);
-			host->sg = NULL;
-			smp_wmb();
-
-			set_bit(EVENT_DATA_ERROR, &host->pending_events);
-
-			tasklet_schedule(&host->tasklet);
-			return;
-		}
 	} while (status & SDMMC_INT_RXDR); /*if the RXDR is ready read again*/
 	data->bytes_xfered += nbytes;
 
@@ -1497,23 +1520,10 @@ static void dw_mci_write_data_pio(struct dw_mci *host)
 			nbytes += len;
 			remain -= len;
 		} while (remain);
-		sg_miter->consumed = offset;
 
+		sg_miter->consumed = offset;
 		status = mci_readl(host, MINTSTS);
 		mci_writel(host, RINTSTS, SDMMC_INT_TXDR);
-		if (status & DW_MCI_DATA_ERROR_FLAGS) {
-			host->data_status = status;
-			data->bytes_xfered += nbytes;
-			sg_miter_stop(sg_miter);
-			host->sg = NULL;
-
-			smp_wmb();
-
-			set_bit(EVENT_DATA_ERROR, &host->pending_events);
-
-			tasklet_schedule(&host->tasklet);
-			return;
-		}
 	} while (status & SDMMC_INT_TXDR); /* if TXDR write again */
 	data->bytes_xfered += nbytes;
 
@@ -1547,12 +1557,11 @@ static void dw_mci_cmd_interrupt(struct dw_mci *host, u32 status)
 static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
 {
 	struct dw_mci *host = dev_id;
-	u32 status, pending;
+	u32 pending;
 	unsigned int pass_count = 0;
 	int i;
 
 	do {
-		status = mci_readl(host, RINTSTS);
 		pending = mci_readl(host, MINTSTS); /* read-only mask reg */
 
 		/*
@@ -1570,7 +1579,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
 
 		if (pending & DW_MCI_CMD_ERROR_FLAGS) {
 			mci_writel(host, RINTSTS, DW_MCI_CMD_ERROR_FLAGS);
-			host->cmd_status = status;
+			host->cmd_status = pending;
 			smp_wmb();
 			set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
 		}
@@ -1578,18 +1587,16 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
 		if (pending & DW_MCI_DATA_ERROR_FLAGS) {
 			/* if there is an error report DATA_ERROR */
 			mci_writel(host, RINTSTS, DW_MCI_DATA_ERROR_FLAGS);
-			host->data_status = status;
+			host->data_status = pending;
 			smp_wmb();
 			set_bit(EVENT_DATA_ERROR, &host->pending_events);
-			if (!(pending & (SDMMC_INT_DTO | SDMMC_INT_DCRC |
-					 SDMMC_INT_SBE | SDMMC_INT_EBE)))
-				tasklet_schedule(&host->tasklet);
+			tasklet_schedule(&host->tasklet);
 		}
 
 		if (pending & SDMMC_INT_DATA_OVER) {
 			mci_writel(host, RINTSTS, SDMMC_INT_DATA_OVER);
 			if (!host->data_status)
-				host->data_status = status;
+				host->data_status = pending;
 			smp_wmb();
 			if (host->dir_status == DW_MCI_RECV_STATUS) {
 				if (host->sg != NULL)
@@ -1613,7 +1620,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
 
 		if (pending & SDMMC_INT_CMD_DONE) {
 			mci_writel(host, RINTSTS, SDMMC_INT_CMD_DONE);
-			dw_mci_cmd_interrupt(host, status);
+			dw_mci_cmd_interrupt(host, pending);
 		}
 
 		if (pending & SDMMC_INT_CD) {