summaryrefslogtreecommitdiff
path: root/drivers/mmc/host/sdhci-esdhc-imx.c
diff options
context:
space:
mode:
authorSascha Hauer <s.hauer@pengutronix.de>2013-01-21 19:02:28 +0800
committerChris Ball <cjb@laptop.org>2013-02-24 14:37:03 -0500
commitaf51079e68d4759e458b0592df5d1fab373c43ae (patch)
tree937bb9166c549ab3ebfbdb19c8dc63e76f904584 /drivers/mmc/host/sdhci-esdhc-imx.c
parent7bc088d38f92f58df97e1cd9a8430331ee5491bb (diff)
mmc: sdhci-esdhc-imx: support 8bit mode
The i.MX esdhc has a nonstandard bit layout for the SDHCI_HOST_CONTROL register. To support 8bit bus width on i.MX populate the platform_bus_width callback. This is tested on an i.MX25, but should according to the datasheets work on the other i.MX using this hardware aswell. The i.MX6, while having a SDHCI_SPEC_300 controller, still uses the same nonstandard register layout. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Chris Ball <cjb@laptop.org>
Diffstat (limited to 'drivers/mmc/host/sdhci-esdhc-imx.c')
-rw-r--r--drivers/mmc/host/sdhci-esdhc-imx.c56
1 files changed, 54 insertions, 2 deletions
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 24daaf4e20ba..f7ee5e67516c 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -41,6 +41,13 @@
#define ESDHC_MIX_CTRL_SDHCI_MASK 0xb7
/*
+ * Our interpretation of the SDHCI_HOST_CONTROL register
+ */
+#define ESDHC_CTRL_4BITBUS (0x1 << 1)
+#define ESDHC_CTRL_8BITBUS (0x2 << 1)
+#define ESDHC_CTRL_BUSWIDTH_MASK (0x3 << 1)
+
+/*
* There is an INT DMA ERR mis-match between eSDHC and STD SDHC SPEC:
* Bit25 is used in STD SPEC, and is reserved in fsl eSDHC design,
* but bit28 is used as the INT DMA ERR in fsl eSDHC design.
@@ -294,6 +301,7 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct pltfm_imx_data *imx_data = pltfm_host->priv;
u32 new_val;
+ u32 mask;
switch (reg) {
case SDHCI_POWER_CONTROL:
@@ -304,7 +312,7 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
return;
case SDHCI_HOST_CONTROL:
/* FSL messed up here, so we need to manually compose it. */
- new_val = val & (SDHCI_CTRL_LED | SDHCI_CTRL_4BITBUS);
+ new_val = val & SDHCI_CTRL_LED;
/* ensure the endianness */
new_val |= ESDHC_HOST_CONTROL_LE;
/* bits 8&9 are reserved on mx25 */
@@ -313,7 +321,13 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
new_val |= (val & SDHCI_CTRL_DMA_MASK) << 5;
}
- esdhc_clrset_le(host, 0xffff, new_val, reg);
+ /*
+ * Do not touch buswidth bits here. This is done in
+ * esdhc_pltfm_bus_width.
+ */
+ mask = 0xffff & ~ESDHC_CTRL_BUSWIDTH_MASK;
+
+ esdhc_clrset_le(host, mask, new_val, reg);
return;
}
esdhc_clrset_le(host, 0xff, val, reg);
@@ -370,6 +384,28 @@ static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host)
return -ENOSYS;
}
+static int esdhc_pltfm_bus_width(struct sdhci_host *host, int width)
+{
+ u32 ctrl;
+
+ switch (width) {
+ case MMC_BUS_WIDTH_8:
+ ctrl = ESDHC_CTRL_8BITBUS;
+ break;
+ case MMC_BUS_WIDTH_4:
+ ctrl = ESDHC_CTRL_4BITBUS;
+ break;
+ default:
+ ctrl = 0;
+ break;
+ }
+
+ esdhc_clrset_le(host, ESDHC_CTRL_BUSWIDTH_MASK, ctrl,
+ SDHCI_HOST_CONTROL);
+
+ return 0;
+}
+
static struct sdhci_ops sdhci_esdhc_ops = {
.read_l = esdhc_readl_le,
.read_w = esdhc_readw_le,
@@ -380,6 +416,7 @@ static struct sdhci_ops sdhci_esdhc_ops = {
.get_max_clock = esdhc_pltfm_get_max_clock,
.get_min_clock = esdhc_pltfm_get_min_clock,
.get_ro = esdhc_pltfm_get_ro,
+ .platform_bus_width = esdhc_pltfm_bus_width,
};
static struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
@@ -417,6 +454,8 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
if (gpio_is_valid(boarddata->wp_gpio))
boarddata->wp_type = ESDHC_WP_GPIO;
+ of_property_read_u32(np, "bus-width", &boarddata->max_bus_width);
+
return 0;
}
#else
@@ -548,6 +587,19 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
break;
}
+ switch (boarddata->max_bus_width) {
+ case 8:
+ host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA;
+ break;
+ case 4:
+ host->mmc->caps |= MMC_CAP_4_BIT_DATA;
+ break;
+ case 1:
+ default:
+ host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA;
+ break;
+ }
+
err = sdhci_add_host(host);
if (err)
goto disable_clk;