sdhci: Add support for bus-specific IO memory accessors

Currently the SDHCI driver works with PCI accessors (write{l,b,w} and
read{l,b,w}).

With this patch drivers may change memory accessors, so that we can
support hosts with "weird" IO memory access requirments.

For example, in "FSL eSDHC" SDHCI hardware all registers are 32 bit
width, with big-endian addressing. That is, readb(0x2f) should turn
into readb(0x2c), and readw(0x2c) should be translated to
le16_to_cpu(readw(0x2e)).

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

1 files changed, 78 insertions, 81 deletions

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index accb592764ed..fd36b822f809 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -48,35 +48,35 @@ static void sdhci_dumpregs(struct sdhci_host *host)
 	printk(KERN_DEBUG DRIVER_NAME ": ============== REGISTER DUMP ==============\n");
 
 	printk(KERN_DEBUG DRIVER_NAME ": Sys addr: 0x%08x | Version:  0x%08x\n",
-		readl(host->ioaddr + SDHCI_DMA_ADDRESS),
-		readw(host->ioaddr + SDHCI_HOST_VERSION));
+		sdhci_readl(host, SDHCI_DMA_ADDRESS),
+		sdhci_readw(host, SDHCI_HOST_VERSION));
 	printk(KERN_DEBUG DRIVER_NAME ": Blk size: 0x%08x | Blk cnt:  0x%08x\n",
-		readw(host->ioaddr + SDHCI_BLOCK_SIZE),
-		readw(host->ioaddr + SDHCI_BLOCK_COUNT));
+		sdhci_readw(host, SDHCI_BLOCK_SIZE),
+		sdhci_readw(host, SDHCI_BLOCK_COUNT));
 	printk(KERN_DEBUG DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
-		readl(host->ioaddr + SDHCI_ARGUMENT),
-		readw(host->ioaddr + SDHCI_TRANSFER_MODE));
+		sdhci_readl(host, SDHCI_ARGUMENT),
+		sdhci_readw(host, SDHCI_TRANSFER_MODE));
 	printk(KERN_DEBUG DRIVER_NAME ": Present:  0x%08x | Host ctl: 0x%08x\n",
-		readl(host->ioaddr + SDHCI_PRESENT_STATE),
-		readb(host->ioaddr + SDHCI_HOST_CONTROL));
+		sdhci_readl(host, SDHCI_PRESENT_STATE),
+		sdhci_readb(host, SDHCI_HOST_CONTROL));
 	printk(KERN_DEBUG DRIVER_NAME ": Power:    0x%08x | Blk gap:  0x%08x\n",
-		readb(host->ioaddr + SDHCI_POWER_CONTROL),
-		readb(host->ioaddr + SDHCI_BLOCK_GAP_CONTROL));
+		sdhci_readb(host, SDHCI_POWER_CONTROL),
+		sdhci_readb(host, SDHCI_BLOCK_GAP_CONTROL));
 	printk(KERN_DEBUG DRIVER_NAME ": Wake-up:  0x%08x | Clock:    0x%08x\n",
-		readb(host->ioaddr + SDHCI_WAKE_UP_CONTROL),
-		readw(host->ioaddr + SDHCI_CLOCK_CONTROL));
+		sdhci_readb(host, SDHCI_WAKE_UP_CONTROL),
+		sdhci_readw(host, SDHCI_CLOCK_CONTROL));
 	printk(KERN_DEBUG DRIVER_NAME ": Timeout:  0x%08x | Int stat: 0x%08x\n",
-		readb(host->ioaddr + SDHCI_TIMEOUT_CONTROL),
-		readl(host->ioaddr + SDHCI_INT_STATUS));
+		sdhci_readb(host, SDHCI_TIMEOUT_CONTROL),
+		sdhci_readl(host, SDHCI_INT_STATUS));
 	printk(KERN_DEBUG DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n",
-		readl(host->ioaddr + SDHCI_INT_ENABLE),
-		readl(host->ioaddr + SDHCI_SIGNAL_ENABLE));
+		sdhci_readl(host, SDHCI_INT_ENABLE),
+		sdhci_readl(host, SDHCI_SIGNAL_ENABLE));
 	printk(KERN_DEBUG DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
-		readw(host->ioaddr + SDHCI_ACMD12_ERR),
-		readw(host->ioaddr + SDHCI_SLOT_INT_STATUS));
+		sdhci_readw(host, SDHCI_ACMD12_ERR),
+		sdhci_readw(host, SDHCI_SLOT_INT_STATUS));
 	printk(KERN_DEBUG DRIVER_NAME ": Caps:     0x%08x | Max curr: 0x%08x\n",
-		readl(host->ioaddr + SDHCI_CAPABILITIES),
-		readl(host->ioaddr + SDHCI_MAX_CURRENT));
+		sdhci_readl(host, SDHCI_CAPABILITIES),
+		sdhci_readl(host, SDHCI_MAX_CURRENT));
 
 	printk(KERN_DEBUG DRIVER_NAME ": ===========================================\n");
 }
@@ -92,12 +92,12 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask)
 	unsigned long timeout;
 
 	if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) {
-		if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) &
+		if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) &
 			SDHCI_CARD_PRESENT))
 			return;
 	}
 
-	writeb(mask, host->ioaddr + SDHCI_SOFTWARE_RESET);
+	sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
 
 	if (mask & SDHCI_RESET_ALL)
 		host->clock = 0;
@@ -106,7 +106,7 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask)
 	timeout = 100;
 
 	/* hw clears the bit when it's done */
-	while (readb(host->ioaddr + SDHCI_SOFTWARE_RESET) & mask) {
+	while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
 		if (timeout == 0) {
 			printk(KERN_ERR "%s: Reset 0x%x never completed.\n",
 				mmc_hostname(host->mmc), (int)mask);
@@ -132,26 +132,26 @@ static void sdhci_init(struct sdhci_host *host)
 		SDHCI_INT_DMA_END | SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE |
 		SDHCI_INT_ADMA_ERROR;
 
-	writel(intmask, host->ioaddr + SDHCI_INT_ENABLE);
-	writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE);
+	sdhci_writel(host, intmask, SDHCI_INT_ENABLE);
+	sdhci_writel(host, intmask, SDHCI_SIGNAL_ENABLE);
 }
 
 static void sdhci_activate_led(struct sdhci_host *host)
 {
 	u8 ctrl;
 
-	ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
+	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
 	ctrl |= SDHCI_CTRL_LED;
-	writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
+	sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
 }
 
 static void sdhci_deactivate_led(struct sdhci_host *host)
 {
 	u8 ctrl;
 
-	ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
+	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
 	ctrl &= ~SDHCI_CTRL_LED;
-	writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
+	sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
 }
 
 #ifdef SDHCI_USE_LEDS_CLASS
@@ -205,7 +205,7 @@ static void sdhci_read_block_pio(struct sdhci_host *host)
 
 		while (len) {
 			if (chunk == 0) {
-				scratch = readl(host->ioaddr + SDHCI_BUFFER);
+				scratch = sdhci_readl(host, SDHCI_BUFFER);
 				chunk = 4;
 			}
 
@@ -257,7 +257,7 @@ static void sdhci_write_block_pio(struct sdhci_host *host)
 			len--;
 
 			if ((chunk == 4) || ((len == 0) && (blksize == 0))) {
-				writel(scratch, host->ioaddr + SDHCI_BUFFER);
+				sdhci_writel(host, scratch, SDHCI_BUFFER);
 				chunk = 0;
 				scratch = 0;
 			}
@@ -292,7 +292,7 @@ static void sdhci_transfer_pio(struct sdhci_host *host)
 		(host->data->blocks == 1))
 		mask = ~0;
 
-	while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) {
+	while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
 		if (host->data->flags & MMC_DATA_READ)
 			sdhci_read_block_pio(host);
 		else
@@ -581,7 +581,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
 	host->data_early = 0;
 
 	count = sdhci_calc_timeout(host, data);
-	writeb(count, host->ioaddr + SDHCI_TIMEOUT_CONTROL);
+	sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
 
 	if (host->flags & SDHCI_USE_DMA)
 		host->flags |= SDHCI_REQ_USE_DMA;
@@ -661,8 +661,8 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
 				WARN_ON(1);
 				host->flags &= ~SDHCI_REQ_USE_DMA;
 			} else {
-				writel(host->adma_addr,
-					host->ioaddr + SDHCI_ADMA_ADDRESS);
+				sdhci_writel(host, host->adma_addr,
+					SDHCI_ADMA_ADDRESS);
 			}
 		} else {
 			int sg_cnt;
@@ -681,8 +681,8 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
 				host->flags &= ~SDHCI_REQ_USE_DMA;
 			} else {
 				WARN_ON(sg_cnt != 1);
-				writel(sg_dma_address(data->sg),
-					host->ioaddr + SDHCI_DMA_ADDRESS);
+				sdhci_writel(host, sg_dma_address(data->sg),
+					SDHCI_DMA_ADDRESS);
 			}
 		}
 	}
@@ -693,14 +693,14 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
 	 * is ADMA.
 	 */
 	if (host->version >= SDHCI_SPEC_200) {
-		ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
+		ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
 		ctrl &= ~SDHCI_CTRL_DMA_MASK;
 		if ((host->flags & SDHCI_REQ_USE_DMA) &&
 			(host->flags & SDHCI_USE_ADMA))
 			ctrl |= SDHCI_CTRL_ADMA32;
 		else
 			ctrl |= SDHCI_CTRL_SDMA;
-		writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
+		sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
 	}
 
 	if (!(host->flags & SDHCI_REQ_USE_DMA)) {
@@ -710,9 +710,8 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
 	}
 
 	/* We do not handle DMA boundaries, so set it to max (512 KiB) */
-	writew(SDHCI_MAKE_BLKSZ(7, data->blksz),
-		host->ioaddr + SDHCI_BLOCK_SIZE);
-	writew(data->blocks, host->ioaddr + SDHCI_BLOCK_COUNT);
+	sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, data->blksz), SDHCI_BLOCK_SIZE);
+	sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
 }
 
 static void sdhci_set_transfer_mode(struct sdhci_host *host,
@@ -733,7 +732,7 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
 	if (host->flags & SDHCI_REQ_USE_DMA)
 		mode |= SDHCI_TRNS_DMA;
 
-	writew(mode, host->ioaddr + SDHCI_TRANSFER_MODE);
+	sdhci_writew(host, mode, SDHCI_TRANSFER_MODE);
 }
 
 static void sdhci_finish_data(struct sdhci_host *host)
@@ -802,7 +801,7 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 	if (host->mrq->data && (cmd == host->mrq->data->stop))
 		mask &= ~SDHCI_DATA_INHIBIT;
 
-	while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) {
+	while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
 		if (timeout == 0) {
 			printk(KERN_ERR "%s: Controller never released "
 				"inhibit bit(s).\n", mmc_hostname(host->mmc));
@@ -821,7 +820,7 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 
 	sdhci_prepare_data(host, cmd->data);
 
-	writel(cmd->arg, host->ioaddr + SDHCI_ARGUMENT);
+	sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT);
 
 	sdhci_set_transfer_mode(host, cmd->data);
 
@@ -849,8 +848,7 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 	if (cmd->data)
 		flags |= SDHCI_CMD_DATA;
 
-	writew(SDHCI_MAKE_CMD(cmd->opcode, flags),
-		host->ioaddr + SDHCI_COMMAND);
+	sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
 }
 
 static void sdhci_finish_command(struct sdhci_host *host)
@@ -863,15 +861,15 @@ static void sdhci_finish_command(struct sdhci_host *host)
 		if (host->cmd->flags & MMC_RSP_136) {
 			/* CRC is stripped so we need to do some shifting. */
 			for (i = 0;i < 4;i++) {
-				host->cmd->resp[i] = readl(host->ioaddr +
+				host->cmd->resp[i] = sdhci_readl(host,
 					SDHCI_RESPONSE + (3-i)*4) << 8;
 				if (i != 3)
 					host->cmd->resp[i] |=
-						readb(host->ioaddr +
+						sdhci_readb(host,
 						SDHCI_RESPONSE + (3-i)*4-1);
 			}
 		} else {
-			host->cmd->resp[0] = readl(host->ioaddr + SDHCI_RESPONSE);
+			host->cmd->resp[0] = sdhci_readl(host, SDHCI_RESPONSE);
 		}
 	}
 
@@ -895,7 +893,7 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 	if (clock == host->clock)
 		return;
 
-	writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
+	sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
 
 	if (clock == 0)
 		goto out;
@@ -908,11 +906,11 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 
 	clk = div << SDHCI_DIVIDER_SHIFT;
 	clk |= SDHCI_CLOCK_INT_EN;
-	writew(clk, host->ioaddr + SDHCI_CLOCK_CONTROL);
+	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
 
 	/* Wait max 10 ms */
 	timeout = 10;
-	while (!((clk = readw(host->ioaddr + SDHCI_CLOCK_CONTROL))
+	while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
 		& SDHCI_CLOCK_INT_STABLE)) {
 		if (timeout == 0) {
 			printk(KERN_ERR "%s: Internal clock never "
@@ -925,7 +923,7 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 	}
 
 	clk |= SDHCI_CLOCK_CARD_EN;
-	writew(clk, host->ioaddr + SDHCI_CLOCK_CONTROL);
+	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
 
 out:
 	host->clock = clock;
@@ -939,7 +937,7 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
 		return;
 
 	if (power == (unsigned short)-1) {
-		writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
+		sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
 		goto out;
 	}
 
@@ -948,7 +946,7 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
 	 * a new value. Some controllers don't seem to like this though.
 	 */
 	if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
-		writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
+		sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
 
 	pwr = SDHCI_POWER_ON;
 
@@ -973,10 +971,9 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
 	 * and set turn on power at the same time, so set the voltage first.
 	 */
 	if ((host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER))
-		writeb(pwr & ~SDHCI_POWER_ON,
-				host->ioaddr + SDHCI_POWER_CONTROL);
+		sdhci_writeb(host, pwr & ~SDHCI_POWER_ON, SDHCI_POWER_CONTROL);
 
-	writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL);
+	sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
 
 out:
 	host->power = power;
@@ -1005,7 +1002,7 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 
 	host->mrq = mrq;
 
-	if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)
+	if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)
 		|| (host->flags & SDHCI_DEVICE_DEAD)) {
 		host->mrq->cmd->error = -ENOMEDIUM;
 		tasklet_schedule(&host->finish_tasklet);
@@ -1034,7 +1031,7 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	 * Should clear out any weird states.
 	 */
 	if (ios->power_mode == MMC_POWER_OFF) {
-		writel(0, host->ioaddr + SDHCI_SIGNAL_ENABLE);
+		sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
 		sdhci_init(host);
 	}
 
@@ -1045,7 +1042,7 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	else
 		sdhci_set_power(host, ios->vdd);
 
-	ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
+	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
 
 	if (ios->bus_width == MMC_BUS_WIDTH_4)
 		ctrl |= SDHCI_CTRL_4BITBUS;
@@ -1057,7 +1054,7 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	else
 		ctrl &= ~SDHCI_CTRL_HISPD;
 
-	writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
+	sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
 
 	/*
 	 * Some (ENE) controllers go apeshit on some ios operation,
@@ -1085,7 +1082,7 @@ static int sdhci_get_ro(struct mmc_host *mmc)
 	if (host->flags & SDHCI_DEVICE_DEAD)
 		present = 0;
 	else
-		present = readl(host->ioaddr + SDHCI_PRESENT_STATE);
+		present = sdhci_readl(host, SDHCI_PRESENT_STATE);
 
 	spin_unlock_irqrestore(&host->lock, flags);
 
@@ -1105,14 +1102,14 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
 	if (host->flags & SDHCI_DEVICE_DEAD)
 		goto out;
 
-	ier = readl(host->ioaddr + SDHCI_INT_ENABLE);
+	ier = sdhci_readl(host, SDHCI_INT_ENABLE);
 
 	ier &= ~SDHCI_INT_CARD_INT;
 	if (enable)
 		ier |= SDHCI_INT_CARD_INT;
 
-	writel(ier, host->ioaddr + SDHCI_INT_ENABLE);
-	writel(ier, host->ioaddr + SDHCI_SIGNAL_ENABLE);
+	sdhci_writel(host, ier, SDHCI_INT_ENABLE);
+	sdhci_writel(host, ier, SDHCI_SIGNAL_ENABLE);
 
 out:
 	mmiowb();
@@ -1142,7 +1139,7 @@ static void sdhci_tasklet_card(unsigned long param)
 
 	spin_lock_irqsave(&host->lock, flags);
 
-	if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
+	if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
 		if (host->mrq) {
 			printk(KERN_ERR "%s: Card removed during transfer!\n",
 				mmc_hostname(host->mmc));
@@ -1346,8 +1343,8 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
 		 * we need to at least restart the transfer.
 		 */
 		if (intmask & SDHCI_INT_DMA_END)
-			writel(readl(host->ioaddr + SDHCI_DMA_ADDRESS),
-				host->ioaddr + SDHCI_DMA_ADDRESS);
+			sdhci_writel(host, sdhci_readl(host, SDHCI_DMA_ADDRESS),
+				SDHCI_DMA_ADDRESS);
 
 		if (intmask & SDHCI_INT_DATA_END) {
 			if (host->cmd) {
@@ -1373,7 +1370,7 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
 
 	spin_lock(&host->lock);
 
-	intmask = readl(host->ioaddr + SDHCI_INT_STATUS);
+	intmask = sdhci_readl(host, SDHCI_INT_STATUS);
 
 	if (!intmask || intmask == 0xffffffff) {
 		result = IRQ_NONE;
@@ -1384,22 +1381,22 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
 		mmc_hostname(host->mmc), intmask);
 
 	if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
-		writel(intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE),
-			host->ioaddr + SDHCI_INT_STATUS);
+		sdhci_writel(host, intmask & (SDHCI_INT_CARD_INSERT |
+			SDHCI_INT_CARD_REMOVE), SDHCI_INT_STATUS);
 		tasklet_schedule(&host->card_tasklet);
 	}
 
 	intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE);
 
 	if (intmask & SDHCI_INT_CMD_MASK) {
-		writel(intmask & SDHCI_INT_CMD_MASK,
-			host->ioaddr + SDHCI_INT_STATUS);
+		sdhci_writel(host, intmask & SDHCI_INT_CMD_MASK,
+			SDHCI_INT_STATUS);
 		sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
 	}
 
 	if (intmask & SDHCI_INT_DATA_MASK) {
-		writel(intmask & SDHCI_INT_DATA_MASK,
-			host->ioaddr + SDHCI_INT_STATUS);
+		sdhci_writel(host, intmask & SDHCI_INT_DATA_MASK,
+			SDHCI_INT_STATUS);
 		sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
 	}
 
@@ -1410,7 +1407,7 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
 	if (intmask & SDHCI_INT_BUS_POWER) {
 		printk(KERN_ERR "%s: Card is consuming too much power!\n",
 			mmc_hostname(host->mmc));
-		writel(SDHCI_INT_BUS_POWER, host->ioaddr + SDHCI_INT_STATUS);
+		sdhci_writel(host, SDHCI_INT_BUS_POWER, SDHCI_INT_STATUS);
 	}
 
 	intmask &= ~SDHCI_INT_BUS_POWER;
@@ -1425,7 +1422,7 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
 			mmc_hostname(host->mmc), intmask);
 		sdhci_dumpregs(host);
 
-		writel(intmask, host->ioaddr + SDHCI_INT_STATUS);
+		sdhci_writel(host, intmask, SDHCI_INT_STATUS);
 	}
 
 	result = IRQ_HANDLED;
@@ -1537,7 +1534,7 @@ int sdhci_add_host(struct sdhci_host *host)
 
 	sdhci_reset(host, SDHCI_RESET_ALL);
 
-	host->version = readw(host->ioaddr + SDHCI_HOST_VERSION);
+	host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
 	host->version = (host->version & SDHCI_SPEC_VER_MASK)
 				>> SDHCI_SPEC_VER_SHIFT;
 	if (host->version > SDHCI_SPEC_200) {
@@ -1546,7 +1543,7 @@ int sdhci_add_host(struct sdhci_host *host)
 			host->version);
 	}
 
-	caps = readl(host->ioaddr + SDHCI_CAPABILITIES);
+	caps = sdhci_readl(host, SDHCI_CAPABILITIES);
 
 	if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
 		host->flags |= SDHCI_USE_DMA;