diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2015-11-06 11:50:24 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2015-11-06 11:50:24 -0800 |
commit | 02f0d3f758ab456c50199b723a53f2443fa4f684 (patch) | |
tree | 3898e06a10512a1f6aed5c997b671d8c796cc9e2 /drivers/mtd/devices/m25p80.c | |
parent | 2d49dcb9e48f65a69281fe4c698c8f1a20215daf (diff) | |
parent | f8479dd6a03cfdc3b14e742045bfd8748cd86bd7 (diff) |
Merge tag 'for-linus-20151106' of git://git.infradead.org/linux-mtd
Pull MTD updates from Brian Norris:
"Core:
- WARN (in some cases) when a struct mtd_info is registered multiple
times; in the past this was "supported", but it's still error prone
for future development. There's only one ugly case of this left in
the tree (that we're aware of) and the owners are aware of the
problems there.
- fix potential deadlock in the blkdev removal path NOTE: the
(potential) deadlock was introduced in a for-stable patch. This
one is also marked for -stable.
- ioctl(BLKPG) compat_ioctl support; resolves issues with 32-bit user
space vs 64-bit kernel space
- Set MTD parent device correctly throughout the tree, so the tree
structure appears correctly in sysfs; many drivers were missing
this (soft) requirement
- Move device tree partitions (ofpart) into a dedicated 'partitions'
subnode; this helps to disambiguate whether a node is a partition
or some other auxiliary data
- Improve error handling for partitioning failures
NAND:
- General: Increase timeout period, for corner-case systems with
less-than-accurate jiffies
- Fix OF-based autoloading of several NAND drivers when built as
modules
- pxa3xx_nand:
- Rework timing configuration to be more dynamic
- Refactor PM support
- brcmnand: prepare for NorthStar 2 support (ARM64, 16-bit NAND
chips)
- sunxi_nand: refactoring and a few bug fixes
- vf610: new NAND driver
- FSMC: add SW BCH support; support common NAND DT bindings
- lpc32xx_slc: refactor and improve timing calculations logic
- denali: support for rev 5.1
SPI NOR:
- Layering improvements
- Added Winbond lock/unlock support
- Added mtd_is_locked() (i.e., ioctl(MEMISLOCKED)) support
- Increase full-chip-erase timeout linearly with flash size
- fsl-quadspi: fix compile for non-ARM architectures
- New flash support"
* tag 'for-linus-20151106' of git://git.infradead.org/linux-mtd: (169 commits)
mtd: don't WARN about overloaded users of mtd->reboot_notifier.notifier_call
mtd: nand: sunxi: avoid retrieving data before ECC pass
mtd: nand: sunxi: fix sunxi_nfc_hw_ecc_read/write_chunk()
mtd: blkdevs: fix potential deadlock + lockdep warnings
mtd: ofpart: move ofpart partitions to a dedicated dt node
doc: dt: mtd: support partitions in a special 'partitions' subnode
mtd: brcmnand: Force 8bit mode before doing nand_scan_ident()
mtd: brcmnand: factor out CFG and CFG_EXT bitfields
mtd: mtdpart: Do not fail mtd probe when parsing partitions fails
mtd: fsl-quadspi: fix macro collision problems with READ/WRITE
mtd: warn when registering the same master many times
mtd: fixup corner case error handling in mtd_device_parse_register()
mtd: tests: Replace timeval with ktime_t
mtd: fsmc_nand: Add BCH4 SW ECC support for SPEAr600
mtd: nand: vf610_nfc: use nand_check_erased_ecc_chunk() helper
mtd: nand: increase ready wait timeout and report timeouts
mtd: docg3: off by one in doc_register_sysfs()
mtd: pxa3xx_nand: clean up the pxa3xx timings
mtd: pxa3xx_nand: rework flash detection and timing setup
mtd: pxa3xx_nand: add helpers to setup the timings
...
Diffstat (limited to 'drivers/mtd/devices/m25p80.c')
-rw-r--r-- | drivers/mtd/devices/m25p80.c | 15 |
1 files changed, 6 insertions, 9 deletions
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index fcf171a1325e..fe9ceb7b5405 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -31,7 +31,6 @@ struct m25p { struct spi_device *spi; struct spi_nor spi_nor; - struct mtd_info mtd; u8 command[MAX_CMD_SIZE]; }; @@ -62,8 +61,7 @@ static int m25p_cmdsz(struct spi_nor *nor) return 1 + nor->addr_width; } -static int m25p80_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len, - int wr_en) +static int m25p80_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) { struct m25p *flash = nor->priv; struct spi_device *spi = flash->spi; @@ -159,7 +157,7 @@ static int m25p80_erase(struct spi_nor *nor, loff_t offset) struct m25p *flash = nor->priv; dev_dbg(nor->dev, "%dKiB at 0x%08x\n", - flash->mtd.erasesize / 1024, (u32)offset); + flash->spi_nor.mtd.erasesize / 1024, (u32)offset); /* Set up command buffer. */ flash->command[0] = nor->erase_opcode; @@ -201,11 +199,10 @@ static int m25p_probe(struct spi_device *spi) nor->read_reg = m25p80_read_reg; nor->dev = &spi->dev; - nor->mtd = &flash->mtd; + nor->flash_node = spi->dev.of_node; nor->priv = flash; spi_set_drvdata(spi, flash); - flash->mtd.priv = nor; flash->spi = spi; if (spi->mode & SPI_RX_QUAD) @@ -214,7 +211,7 @@ static int m25p_probe(struct spi_device *spi) mode = SPI_NOR_DUAL; if (data && data->name) - flash->mtd.name = data->name; + nor->mtd.name = data->name; /* For some (historical?) reason many platforms provide two different * names in flash_platform_data: "name" and "type". Quite often name is @@ -232,7 +229,7 @@ static int m25p_probe(struct spi_device *spi) ppdata.of_node = spi->dev.of_node; - return mtd_device_parse_register(&flash->mtd, NULL, &ppdata, + return mtd_device_parse_register(&nor->mtd, NULL, &ppdata, data ? data->parts : NULL, data ? data->nr_parts : 0); } @@ -243,7 +240,7 @@ static int m25p_remove(struct spi_device *spi) struct m25p *flash = spi_get_drvdata(spi); /* Clean up MTD stuff. */ - return mtd_device_unregister(&flash->mtd); + return mtd_device_unregister(&flash->spi_nor.mtd); } /* |