Merge tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "First cycle with Boris as NAND maintainer! Many (most) bullets stolen
  from him.

  Generic:
   - Migrated NAND LED trigger to be a generic MTD trigger

  NAND:
   - Introduction of the "ECC algorithm" concept, to avoid overloading
     the ECC mode field too much more
   - Replaced the nand_ecclayout infrastructure with something a little
     more flexible (finally!) and future proof
   - Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some
     of this into their own tree as well
   - Prepare the sunxi NAND driver to receive DMA support
   - Handle bitflips in erased pages on GPMI revisions that do not
     support this in hardware.

  SPI NOR:
   - Start using the spi_flash_read() API for SPI drivers that support
     it (i.e., SPI drivers with special memory-mapped flash modes)

  And other small scattered improvments"

* tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd: (155 commits)
  mtd: spi-nor: support GigaDevice gd25lq64c
  mtd: nand_bch: fix spelling of "probably"
  mtd: brcmnand: respect ECC algorithm set by NAND subsystem
  gpmi-nand: Handle ECC Errors in erased pages
  Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value
  mtd: nand: add support for "nand-ecc-algo" DT property
  mtd: mtd: drop NAND_ECC_SOFT_BCH enum value
  mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping
  mtd: nand: read ECC algorithm from the new field
  mtd: nand: fsmc: validate ECC setup by checking algorithm directly
  mtd: nand: set ECC algorithm to Hamming on fallback
  staging: mt29f_spinand: set ECC algorithm explicitly
  CRIS v32: nand: set ECC algorithm explicitly
  mtd: nand: atmel: set ECC algorithm explicitly
  mtd: nand: davinci: set ECC algorithm explicitly
  mtd: nand: bf5xx: set ECC algorithm explicitly
  mtd: nand: omap2: Fix high memory dma prefetch transfer
  mtd: nand: omap2: Start dma request before enabling prefetch
  mtd: nandsim: add __init attribute
  mtd: nand: move of_get_nand_xxx() helpers into nand_base.c
  ...

1 files changed, 28 insertions, 5 deletions

diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c
index d86a60e1bbcb..47316998017f 100644
--- a/drivers/mtd/nand/docg4.c
+++ b/drivers/mtd/nand/docg4.c
@@ -222,10 +222,33 @@ struct docg4_priv {
  * Bytes 8 - 14 are hw-generated ecc covering entire page + oob bytes 0 - 14.
  * Byte 15 (the last) is used by the driver as a "page written" flag.
  */
-static struct nand_ecclayout docg4_oobinfo = {
-	.eccbytes = 9,
-	.eccpos = {7, 8, 9, 10, 11, 12, 13, 14, 15},
-	.oobfree = { {.offset = 2, .length = 5} }
+static int docg4_ooblayout_ecc(struct mtd_info *mtd, int section,
+			       struct mtd_oob_region *oobregion)
+{
+	if (section)
+		return -ERANGE;
+
+	oobregion->offset = 7;
+	oobregion->length = 9;
+
+	return 0;
+}
+
+static int docg4_ooblayout_free(struct mtd_info *mtd, int section,
+				struct mtd_oob_region *oobregion)
+{
+	if (section)
+		return -ERANGE;
+
+	oobregion->offset = 2;
+	oobregion->length = 5;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops docg4_ooblayout_ops = {
+	.ecc = docg4_ooblayout_ecc,
+	.free = docg4_ooblayout_free,
 };
 
 /*
@@ -1209,6 +1232,7 @@ static void __init init_mtd_structs(struct mtd_info *mtd)
 	mtd->writesize = DOCG4_PAGE_SIZE;
 	mtd->erasesize = DOCG4_BLOCK_SIZE;
 	mtd->oobsize = DOCG4_OOB_SIZE;
+	mtd_set_ooblayout(mtd, &docg4_ooblayout_ops);
 	nand->chipsize = DOCG4_CHIP_SIZE;
 	nand->chip_shift = DOCG4_CHIP_SHIFT;
 	nand->bbt_erase_shift = nand->phys_erase_shift = DOCG4_ERASE_SHIFT;
@@ -1217,7 +1241,6 @@ static void __init init_mtd_structs(struct mtd_info *mtd)
 	nand->pagemask = 0x3ffff;
 	nand->badblockpos = NAND_LARGE_BADBLOCK_POS;
 	nand->badblockbits = 8;
-	nand->ecc.layout = &docg4_oobinfo;
 	nand->ecc.mode = NAND_ECC_HW_SYNDROME;
 	nand->ecc.size = DOCG4_PAGE_SIZE;
 	nand->ecc.prepad = 8;