Merge tag 'for-linus-20140127' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 - Add me (Brian Norris) as an additional MTD maintainer (it'd be nice to get
   David's "ack" for this; I'm sure he approves, but he's been pretty silent
   lately)
 - Add Ezequiel Garcie as maintainer for the pxa3xx NAND driver
 - Last (?) round of pxa3xx improvements for supporting Armada 370/XP
 - Typical churn in driver boilerplate (OOM messages, printk()'s, devm_*, etc.)
 - Quad read mode support for SPI NOR driver (m25p80)
 - Update Davinci NAND driver to prepare for use on new platforms
 - Begin to kill off NAND_MAX_{PAGE,OOB}SIZE macros; more work is pending
 - Miscellaneous NAND device support (new IDs)
 - Add READ RETRY support for Micron MLC NAND
 - Support new GPMI NAND ECC layout device-tree binding
 - Avoid mapping stack/vmalloc() memory for GPMI NAND DMA

* tag 'for-linus-20140127' of git://git.infradead.org/linux-mtd: (151 commits)
  mtd: gpmi: add sanity check when mapping DMA for read_buf/write_buf
  mtd: gpmi: allocate a proper buffer for non ECC read/write
  mtd: m25p80: Set rx_nbits for Quad SPI transfers
  mtd: m25p80: Enable Quad SPI read transfers for s25fl512s
  mtd: s3c2410: Merge plat/regs-nand.h into s3c2410.c
  mtd: mtdram: add missing 'const'
  mtd: m25p80: assign default read command
  mtd: nuc900_nand: remove redundant return value check of platform_get_resource()
  mtd: plat_nand: remove redundant return value check of platform_get_resource()
  mtd: nand: add Intel manufacturer ID
  mtd: nand: add SanDisk manufacturer ID
  mtd: nand: add support for Samsung K9LCG08U0B
  mtd: nand: pxa3xx: Add support for 2048 bytes page size devices
  mtd: m25p80: Use OPCODE_QUAD_READ_4B for 4-byte addressing
  mtd: nand: don't use {read,write}_buf for 8-bit transfers
  mtd: nand: use __packed shorthand
  mtd: nand: support Micron READ RETRY
  mtd: nand: add generic READ RETRY support
  mtd: nand: add ONFI vendor block for Micron
  mtd: nand: localize ECC failures per page
  ...

1 files changed, 6 insertions, 10 deletions

diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
index 8b2752263db9..1550692973dc 100644
--- a/drivers/mtd/nand/fsmc_nand.c
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -889,10 +889,8 @@ static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
 
 	pdata->nand_timings = devm_kzalloc(&pdev->dev,
 				sizeof(*pdata->nand_timings), GFP_KERNEL);
-	if (!pdata->nand_timings) {
-		dev_err(&pdev->dev, "no memory for nand_timing\n");
+	if (!pdata->nand_timings)
 		return -ENOMEM;
-	}
 	of_property_read_u8_array(np, "timings", (u8 *)pdata->nand_timings,
 						sizeof(*pdata->nand_timings));
 
@@ -950,10 +948,8 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
 
 	/* Allocate memory for the device structure (and zero it) */
 	host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
-	if (!host) {
-		dev_err(&pdev->dev, "failed to allocate device structure\n");
+	if (!host)
 		return -ENOMEM;
-	}
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data");
 	host->data_va = devm_ioremap_resource(&pdev->dev, res);
@@ -1108,8 +1104,8 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
 			host->ecc_place = &fsmc_ecc4_lp_place;
 			break;
 		default:
-			printk(KERN_WARNING "No oob scheme defined for "
-			       "oobsize %d\n", mtd->oobsize);
+			dev_warn(&pdev->dev, "No oob scheme defined for oobsize %d\n",
+				 mtd->oobsize);
 			BUG();
 		}
 	} else {
@@ -1124,8 +1120,8 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
 			nand->ecc.layout = &fsmc_ecc1_128_layout;
 			break;
 		default:
-			printk(KERN_WARNING "No oob scheme defined for "
-			       "oobsize %d\n", mtd->oobsize);
+			dev_warn(&pdev->dev, "No oob scheme defined for oobsize %d\n",
+				 mtd->oobsize);
 			BUG();
 		}
 	}