diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2014-08-08 18:13:21 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2014-08-08 18:13:21 -0700 |
| commit | c309bfa9b481e7dbd3e1ab819271bf3009f44859 (patch) | |
| tree | fc102360b3e7cb53796a451bc8fe01239c734e07 /drivers/mtd/nand/lpc32xx_slc.c | |
| parent | 9e9ac896667a55ae9a3df119611ee5322abe2890 (diff) | |
| parent | 2a500afe1e0e84c7a126df693dbd01353756dcfa (diff) | |
Merge tag 'for-linus-20140808' of git://git.infradead.org/linux-mtd
Pull MTD updates from Brian Norris:
"AMD-compatible CFI driver:
- Support OTP programming for Micron M29EW family
- Increase buffer write timeout, according to detected flash
parameter info
NAND
- Add helpers for retrieving ONFI timing modes
- GPMI: provide option to disable bad block marker swapping (required
for Ka-On electronics platforms)
SPI NOR
- EON EN25QH128 support
- Support new Flag Status Register (FSR) on a few Micron flash
Common
- New sysfs entries for bad block and ECC stats
And a few miscellaneous refactorings, cleanups, and driver
improvements"
* tag 'for-linus-20140808' of git://git.infradead.org/linux-mtd: (31 commits)
mtd: gpmi: make blockmark swapping optional
mtd: gpmi: remove line breaks from error messages and improve wording
mtd: gpmi: remove useless (void *) type casts and spaces between type casts and variables
mtd: atmel_nand: NFC: support multiple interrupt handling
mtd: atmel_nand: implement the nfc_device_ready() by checking the R/B bit
mtd: atmel_nand: add NFC status error check
mtd: atmel_nand: make ecc parameters same as definition
mtd: nand: add ONFI timing mode to nand_timings converter
mtd: nand: define struct nand_timings
mtd: cfi_cmdset_0002: fix do_write_buffer() timeout error
mtd: denali: use 8 bytes for READID command
mtd/ftl: fix the double free of the buffers allocated in build_maps()
mtd: phram: Fix whitespace issues
mtd: spi-nor: add support for EON EN25QH128
mtd: cfi_cmdset_0002: Add support for locking OTP memory
mtd: cfi_cmdset_0002: Add support for writing OTP memory
mtd: cfi_cmdset_0002: Invalidate cache after entering/exiting OTP memory
mtd: cfi_cmdset_0002: Add support for reading OTP
mtd: spi-nor: add support for flag status register on Micron chips
mtd: Account for BBT blocks when a partition is being allocated
...
Diffstat (limited to 'drivers/mtd/nand/lpc32xx_slc.c')
| -rw-r--r-- | drivers/mtd/nand/lpc32xx_slc.c | 6 |
1 files changed, 0 insertions, 6 deletions
diff --git a/drivers/mtd/nand/lpc32xx_slc.c b/drivers/mtd/nand/lpc32xx_slc.c index 53a6742e3da3..8caef28e0756 100644 --- a/drivers/mtd/nand/lpc32xx_slc.c +++ b/drivers/mtd/nand/lpc32xx_slc.c @@ -840,12 +840,6 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) chip->ecc.strength = 1; chip->ecc.hwctl = lpc32xx_nand_ecc_enable; - /* bitflip_threshold's default is defined as ecc_strength anyway. - * Unfortunately, it is set only later at add_mtd_device(). Meanwhile - * being 0, it causes bad block table scanning errors in - * nand_scan_tail(), so preparing it here already. */ - mtd->bitflip_threshold = chip->ecc.strength; - /* * Allocate a large enough buffer for a single huge page plus * extra space for the spare area and ECC storage area |