summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-04-07 10:17:30 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2014-04-07 10:17:30 -0700
commitc29aa153ef0469cddf0146d41ce6494bd76be78b (patch)
treeb49af4e6cf54e9988dd45640a86c4de7f49ddf6d /drivers/mtd/nand
parent2b3a8fd735f86ebeb2b9d061054003000c36b654 (diff)
parent4a4163caccae97a23d97c29032664ee7b7a498d0 (diff)
Merge tag 'for-linus-20140405' of git://git.infradead.org/linux-mtd
Pull MTD updates from Brian Norris: - A few SPI NOR ID definitions - Kill the NAND "max pagesize" restriction - Fix some x16 bus-width NAND support - Add NAND JEDEC parameter page support - DT bindings for NAND ECC - GPMI NAND updates (subpage reads) - More OMAP NAND refactoring - New STMicro SPI NOR driver (now in 40 patches!) - A few other random bugfixes * tag 'for-linus-20140405' of git://git.infradead.org/linux-mtd: (120 commits) Fix index regression in nand_read_subpage mtd: diskonchip: mem resource name is not optional mtd: nand: fix mention to CONFIG_MTD_NAND_ECC_BCH mtd: nand: fix GET/SET_FEATURES address on 16-bit devices mtd: omap2: Use devm_ioremap_resource() mtd: denali_dt: Use devm_ioremap_resource() mtd: devices: elm: update DRIVER_NAME as "omap-elm" mtd: devices: elm: configure parallel channels based on ecc_steps mtd: devices: elm: clean elm_load_syndrome mtd: devices: elm: check for hardware engine's design constraints mtd: st_spi_fsm: Succinctly reorganise .remove() mtd: st_spi_fsm: Allow loop to run at least once before giving up CPU mtd: st_spi_fsm: Correct vendor name spelling issue - missing "M" mtd: st_spi_fsm: Avoid duplicating MTD core code mtd: st_spi_fsm: Remove useless consts from function arguments mtd: st_spi_fsm: Convert ST SPI FSM (NOR) Flash driver to new DT partitions mtd: st_spi_fsm: Move runtime configurable msg sequences into device's struct mtd: st_spi_fsm: Supply the W25Qxxx chip specific configuration call-back mtd: st_spi_fsm: Supply the S25FLxxx chip specific configuration call-back mtd: st_spi_fsm: Supply the MX25xxx chip specific configuration call-back ...
Diffstat (limited to 'drivers/mtd/nand')
-rw-r--r--drivers/mtd/nand/Kconfig2
-rw-r--r--drivers/mtd/nand/ams-delta.c1
-rw-r--r--drivers/mtd/nand/atmel_nand.c14
-rw-r--r--drivers/mtd/nand/au1550nd.c4
-rw-r--r--drivers/mtd/nand/bf5xx_nand.c1
-rw-r--r--drivers/mtd/nand/cafe_nand.c68
-rw-r--r--drivers/mtd/nand/davinci_nand.c1
-rw-r--r--drivers/mtd/nand/denali_dt.c39
-rw-r--r--drivers/mtd/nand/diskonchip.c5
-rw-r--r--drivers/mtd/nand/fsl_elbc_nand.c1
-rw-r--r--drivers/mtd/nand/fsl_ifc_nand.c1
-rw-r--r--drivers/mtd/nand/gpio.c1
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-nand.c102
-rw-r--r--drivers/mtd/nand/mpc5121_nfc.c1
-rw-r--r--drivers/mtd/nand/mxc_nand.c2
-rw-r--r--drivers/mtd/nand/nand_base.c165
-rw-r--r--drivers/mtd/nand/nand_ids.c3
-rw-r--r--drivers/mtd/nand/nuc900_nand.c6
-rw-r--r--drivers/mtd/nand/omap2.c512
-rw-r--r--drivers/mtd/nand/pasemi_nand.c1
-rw-r--r--drivers/mtd/nand/pxa3xx_nand.c3
-rw-r--r--drivers/mtd/nand/s3c2410.c1
22 files changed, 527 insertions, 407 deletions
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index a4bee41ad5cb..f1cf503517fd 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -460,6 +460,8 @@ config MTD_NAND_MXC
config MTD_NAND_SH_FLCTL
tristate "Support for NAND on Renesas SuperH FLCTL"
depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
+ depends on HAS_IOMEM
+ depends on HAS_DMA
help
Several Renesas SuperH CPU has FLCTL. This option enables support
for NAND Flash using FLCTL.
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index 8611eb4b45fc..4936e9e0002f 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -17,7 +17,6 @@
*/
#include <linux/slab.h>
-#include <linux/init.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/mtd/mtd.h>
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index c36e9b84487c..4ce181a35bcd 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -430,7 +430,7 @@ err_dma:
dma_unmap_single(dma_dev->dev, phys_addr, len, dir);
err_buf:
if (err != 0)
- dev_warn(host->dev, "Fall back to CPU I/O\n");
+ dev_dbg(host->dev, "Fall back to CPU I/O\n");
return err;
}
@@ -1220,6 +1220,7 @@ static int atmel_pmecc_nand_init_params(struct platform_device *pdev,
goto err;
}
+ nand_chip->options |= NAND_NO_SUBPAGE_WRITE;
nand_chip->ecc.read_page = atmel_nand_pmecc_read_page;
nand_chip->ecc.write_page = atmel_nand_pmecc_write_page;
@@ -1659,8 +1660,8 @@ static void nfc_select_chip(struct mtd_info *mtd, int chip)
nfc_writel(host->nfc->hsmc_regs, CTRL, NFC_CTRL_ENABLE);
}
-static int nfc_make_addr(struct mtd_info *mtd, int column, int page_addr,
- unsigned int *addr1234, unsigned int *cycle0)
+static int nfc_make_addr(struct mtd_info *mtd, int command, int column,
+ int page_addr, unsigned int *addr1234, unsigned int *cycle0)
{
struct nand_chip *chip = mtd->priv;
@@ -1674,7 +1675,8 @@ static int nfc_make_addr(struct mtd_info *mtd, int column, int page_addr,
*addr1234 = 0;
if (column != -1) {
- if (chip->options & NAND_BUSWIDTH_16)
+ if (chip->options & NAND_BUSWIDTH_16 &&
+ !nand_opcode_8bits(command))
column >>= 1;
addr_bytes[acycle++] = column & 0xff;
if (mtd->writesize > 512)
@@ -1787,8 +1789,8 @@ static void nfc_nand_command(struct mtd_info *mtd, unsigned int command,
}
if (do_addr)
- acycle = nfc_make_addr(mtd, column, page_addr, &addr1234,
- &cycle0);
+ acycle = nfc_make_addr(mtd, command, column, page_addr,
+ &addr1234, &cycle0);
nfc_addr_cmd = cmd1 | cmd2 | vcmd2 | acycle | csid | dataen | nfcwr;
nfc_send_command(host, nfc_addr_cmd, addr1234, cycle0);
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 2880d888cfc5..bc5c518828d2 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -11,7 +11,6 @@
#include <linux/slab.h>
#include <linux/gpio.h>
-#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/mtd/mtd.h>
@@ -308,7 +307,8 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i
/* Serially input address */
if (column != -1) {
/* Adjust columns for 16 bit buswidth */
- if (this->options & NAND_BUSWIDTH_16)
+ if (this->options & NAND_BUSWIDTH_16 &&
+ !nand_opcode_8bits(command))
column >>= 1;
ctx->write_byte(mtd, column);
}
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 94f55dbde995..b7a24946ca26 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -37,7 +37,6 @@
#include <linux/module.h>
#include <linux/types.h>
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/ioport.h>
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index f2f64addb5e8..4e66726da9aa 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -627,6 +627,8 @@ static int cafe_nand_probe(struct pci_dev *pdev,
struct cafe_priv *cafe;
uint32_t ctrl;
int err = 0;
+ int old_dma;
+ struct nand_buffers *nbuf;
/* Very old versions shared the same PCI ident for all three
functions on the chip. Verify the class too... */
@@ -655,13 +657,6 @@ static int cafe_nand_probe(struct pci_dev *pdev,
err = -ENOMEM;
goto out_free_mtd;
}
- cafe->dmabuf = dma_alloc_coherent(&cafe->pdev->dev, 2112 + sizeof(struct nand_buffers),
- &cafe->dmaaddr, GFP_KERNEL);
- if (!cafe->dmabuf) {
- err = -ENOMEM;
- goto out_ior;
- }
- cafe->nand.buffers = (void *)cafe->dmabuf + 2112;
cafe->rs = init_rs_non_canonical(12, &cafe_mul, 0, 1, 8);
if (!cafe->rs) {
@@ -721,7 +716,7 @@ static int cafe_nand_probe(struct pci_dev *pdev,
"CAFE NAND", mtd);
if (err) {
dev_warn(&pdev->dev, "Could not register IRQ %d\n", pdev->irq);
- goto out_free_dma;
+ goto out_ior;
}
/* Disable master reset, enable NAND clock */
@@ -735,6 +730,32 @@ static int cafe_nand_probe(struct pci_dev *pdev,
cafe_writel(cafe, 0x7006, GLOBAL_CTRL);
cafe_writel(cafe, 0x700a, GLOBAL_CTRL);
+ /* Enable NAND IRQ in global IRQ mask register */
+ cafe_writel(cafe, 0x80000007, GLOBAL_IRQ_MASK);
+ cafe_dev_dbg(&cafe->pdev->dev, "Control %x, IRQ mask %x\n",
+ cafe_readl(cafe, GLOBAL_CTRL),
+ cafe_readl(cafe, GLOBAL_IRQ_MASK));
+
+ /* Do not use the DMA for the nand_scan_ident() */
+ old_dma = usedma;
+ usedma = 0;
+
+ /* Scan to find existence of the device */
+ if (nand_scan_ident(mtd, 2, NULL)) {
+ err = -ENXIO;
+ goto out_irq;
+ }
+
+ cafe->dmabuf = dma_alloc_coherent(&cafe->pdev->dev,
+ 2112 + sizeof(struct nand_buffers) +
+ mtd->writesize + mtd->oobsize,
+ &cafe->dmaaddr, GFP_KERNEL);
+ if (!cafe->dmabuf) {
+ err = -ENOMEM;
+ goto out_irq;
+ }
+ cafe->nand.buffers = nbuf = (void *)cafe->dmabuf + 2112;
+
/* Set up DMA address */
cafe_writel(cafe, cafe->dmaaddr & 0xffffffff, NAND_DMA_ADDR0);
if (sizeof(cafe->dmaaddr) > 4)
@@ -746,16 +767,13 @@ static int cafe_nand_probe(struct pci_dev *pdev,
cafe_dev_dbg(&cafe->pdev->dev, "Set DMA address to %x (virt %p)\n",
cafe_readl(cafe, NAND_DMA_ADDR0), cafe->dmabuf);
- /* Enable NAND IRQ in global IRQ mask register */
- cafe_writel(cafe, 0x80000007, GLOBAL_IRQ_MASK);
- cafe_dev_dbg(&cafe->pdev->dev, "Control %x, IRQ mask %x\n",
- cafe_readl(cafe, GLOBAL_CTRL), cafe_readl(cafe, GLOBAL_IRQ_MASK));
+ /* this driver does not need the @ecccalc and @ecccode */
+ nbuf->ecccalc = NULL;
+ nbuf->ecccode = NULL;
+ nbuf->databuf = (uint8_t *)(nbuf + 1);
- /* Scan to find existence of the device */
- if (nand_scan_ident(mtd, 2, NULL)) {
- err = -ENXIO;
- goto out_irq;
- }
+ /* Restore the DMA flag */
+ usedma = old_dma;
cafe->ctl2 = 1<<27; /* Reed-Solomon ECC */
if (mtd->writesize == 2048)
@@ -773,7 +791,7 @@ static int cafe_nand_probe(struct pci_dev *pdev,
} else {
printk(KERN_WARNING "Unexpected NAND flash writesize %d. Aborting\n",
mtd->writesize);
- goto out_irq;
+ goto out_free_dma;
}
cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
cafe->nand.ecc.size = mtd->writesize;
@@ -790,7 +808,7 @@ static int cafe_nand_probe(struct pci_dev *pdev,
err = nand_scan_tail(mtd);
if (err)
- goto out_irq;
+ goto out_free_dma;
pci_set_drvdata(pdev, mtd);
@@ -799,12 +817,15 @@ static int cafe_nand_probe(struct pci_dev *pdev,
goto out;
+ out_free_dma:
+ dma_free_coherent(&cafe->pdev->dev,
+ 2112 + sizeof(struct nand_buffers) +
+ mtd->writesize + mtd->oobsize,
+ cafe->dmabuf, cafe->dmaaddr);
out_irq:
/* Disable NAND IRQ in global IRQ mask register */
cafe_writel(cafe, ~1 & cafe_readl(cafe, GLOBAL_IRQ_MASK), GLOBAL_IRQ_MASK);
free_irq(pdev->irq, mtd);
- out_free_dma:
- dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr);
out_ior:
pci_iounmap(pdev, cafe->mmio);
out_free_mtd:
@@ -824,7 +845,10 @@ static void cafe_nand_remove(struct pci_dev *pdev)
nand_release(mtd);
free_rs(cafe->rs);
pci_iounmap(pdev, cafe->mmio);
- dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr);
+ dma_free_coherent(&cafe->pdev->dev,
+ 2112 + sizeof(struct nand_buffers) +
+ mtd->writesize + mtd->oobsize,
+ cafe->dmabuf, cafe->dmaaddr);
kfree(mtd);
}
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 8eb6a36f125a..4615d79fc93f 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -24,7 +24,6 @@
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/err.h>
diff --git a/drivers/mtd/nand/denali_dt.c b/drivers/mtd/nand/denali_dt.c
index babb02c4b220..35cb17f57800 100644
--- a/drivers/mtd/nand/denali_dt.c
+++ b/drivers/mtd/nand/denali_dt.c
@@ -30,24 +30,6 @@ struct denali_dt {
struct clk *clk;
};
-static void __iomem *request_and_map(struct device *dev,
- const struct resource *res)
-{
- void __iomem *ptr;
-
- if (!devm_request_mem_region(dev, res->start, resource_size(res),
- "denali-dt")) {
- dev_err(dev, "unable to request %s\n", res->name);
- return NULL;
- }
-
- ptr = devm_ioremap_nocache(dev, res->start, resource_size(res));
- if (!ptr)
- dev_err(dev, "ioremap_nocache of %s failed!", res->name);
-
- return ptr;
-}
-
static const struct of_device_id denali_nand_dt_ids[] = {
{ .compatible = "denali,denali-nand-dt" },
{ /* sentinel */ }
@@ -78,13 +60,6 @@ static int denali_dt_probe(struct platform_device *ofdev)
return -ENOMEM;
denali = &dt->denali;
- denali_reg = platform_get_resource_byname(ofdev, IORESOURCE_MEM, "denali_reg");
- nand_data = platform_get_resource_byname(ofdev, IORESOURCE_MEM, "nand_data");
- if (!denali_reg || !nand_data) {
- dev_err(&ofdev->dev, "resources not completely defined\n");
- return -EINVAL;
- }
-
denali->platform = DT;
denali->dev = &ofdev->dev;
denali->irq = platform_get_irq(ofdev, 0);
@@ -93,13 +68,15 @@ static int denali_dt_probe(struct platform_device *ofdev)
return denali->irq;
}
- denali->flash_reg = request_and_map(&ofdev->dev, denali_reg);
- if (!denali->flash_reg)
- return -ENOMEM;
+ denali_reg = platform_get_resource_byname(ofdev, IORESOURCE_MEM, "denali_reg");
+ denali->flash_reg = devm_ioremap_resource(&ofdev->dev, denali_reg);
+ if (IS_ERR(denali->flash_reg))
+ return PTR_ERR(denali->flash_reg);
- denali->flash_mem = request_and_map(&ofdev->dev, nand_data);
- if (!denali->flash_mem)
- return -ENOMEM;
+ nand_data = platform_get_resource_byname(ofdev, IORESOURCE_MEM, "nand_data");
+ denali->flash_mem = devm_ioremap_resource(&ofdev->dev, nand_data);
+ if (IS_ERR(denali->flash_mem))
+ return PTR_ERR(denali->flash_mem);
if (!of_property_read_u32(ofdev->dev.of_node,
"dma-mask", (u32 *)&denali_dma_mask)) {
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index fec31d71b84e..f68a7bccecdc 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -698,7 +698,8 @@ static void doc2001plus_command(struct mtd_info *mtd, unsigned command, int colu
/* Serially input address */
if (column != -1) {
/* Adjust columns for 16 bit buswidth */
- if (this->options & NAND_BUSWIDTH_16)
+ if (this->options & NAND_BUSWIDTH_16 &&
+ !nand_opcode_8bits(command))
column >>= 1;
WriteDOC(column, docptr, Mplus_FlashAddress);
}
@@ -1438,7 +1439,7 @@ static int __init doc_probe(unsigned long physadr)
int reg, len, numchips;
int ret = 0;
- if (!request_mem_region(physadr, DOC_IOREMAP_LEN, NULL))
+ if (!request_mem_region(physadr, DOC_IOREMAP_LEN, "DiskOnChip"))
return -EBUSY;
virtadr = ioremap(physadr, DOC_IOREMAP_LEN);
if (!virtadr) {
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index bcf60800c3ce..ec549cd9849f 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -24,7 +24,6 @@
#include <linux/module.h>
#include <linux/types.h>
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/ioport.h>
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index 50d9161c4faf..cb45d2f8e208 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -22,7 +22,6 @@
#include <linux/module.h>
#include <linux/types.h>
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/of_address.h>
#include <linux/slab.h>
diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c
index 8e6148aa4539..117ce333fdd4 100644
--- a/drivers/mtd/nand/gpio.c
+++ b/drivers/mtd/nand/gpio.c
@@ -18,7 +18,6 @@
#include <linux/kernel.h>
#include <linux/err.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/platform_device.h>
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index ca6369fe91ff..bb77f750e75a 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -27,6 +27,7 @@
#include <linux/of_device.h>
#include <linux/of_mtd.h>
#include "gpmi-nand.h"
+#include "bch-regs.h"
/* Resource names for the GPMI NAND driver. */
#define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME "gpmi-nand"
@@ -985,7 +986,7 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
int ret;
dev_dbg(this->dev, "page number is : %d\n", page);
- ret = read_page_prepare(this, buf, mtd->writesize,
+ ret = read_page_prepare(this, buf, nfc_geo->payload_size,
this->payload_virt, this->payload_phys,
nfc_geo->payload_size,
&payload_virt, &payload_phys);
@@ -999,7 +1000,7 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
/* go! */
ret = gpmi_read_page(this, payload_phys, auxiliary_phys);
- read_page_end(this, buf, mtd->writesize,
+ read_page_end(this, buf, nfc_geo->payload_size,
this->payload_virt, this->payload_phys,
nfc_geo->payload_size,
payload_virt, payload_phys);
@@ -1041,7 +1042,7 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
}
- read_page_swap_end(this, buf, mtd->writesize,
+ read_page_swap_end(this, buf, nfc_geo->payload_size,
this->payload_virt, this->payload_phys,
nfc_geo->payload_size,
payload_virt, payload_phys);
@@ -1049,6 +1050,90 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
return max_bitflips;
}
+/* Fake a virtual small page for the subpage read */
+static int gpmi_ecc_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
+ uint32_t offs, uint32_t len, uint8_t *buf, int page)
+{
+ struct gpmi_nand_data *this = chip->priv;
+ void __iomem *bch_regs = this->resources.bch_regs;
+ struct bch_geometry old_geo = this->bch_geometry;
+ struct bch_geometry *geo = &this->bch_geometry;
+ int size = chip->ecc.size; /* ECC chunk size */
+ int meta, n, page_size;
+ u32 r1_old, r2_old, r1_new, r2_new;
+ unsigned int max_bitflips;
+ int first, last, marker_pos;
+ int ecc_parity_size;
+ int col = 0;
+
+ /* The size of ECC parity */
+ ecc_parity_size = geo->gf_len * geo->ecc_strength / 8;
+
+ /* Align it with the chunk size */
+ first = offs / size;
+ last = (offs + len - 1) / size;
+
+ /*
+ * Find the chunk which contains the Block Marker. If this chunk is
+ * in the range of [first, last], we have to read out the whole page.
+ * Why? since we had swapped the data at the position of Block Marker
+ * to the metadata which is bound with the chunk 0.
+ */
+ marker_pos = geo->block_mark_byte_offset / size;
+ if (last >= marker_pos && first <= marker_pos) {
+ dev_dbg(this->dev, "page:%d, first:%d, last:%d, marker at:%d\n",
+ page, first, last, marker_pos);
+ return gpmi_ecc_read_page(mtd, chip, buf, 0, page);
+ }
+
+ meta = geo->metadata_size;
+ if (first) {
+ col = meta + (size + ecc_parity_size) * first;
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, col, -1);
+
+ meta = 0;
+ buf = buf + first * size;
+ }
+
+ /* Save the old environment */
+ r1_old = r1_new = readl(bch_regs + HW_BCH_FLASH0LAYOUT0);
+ r2_old = r2_new = readl(bch_regs + HW_BCH_FLASH0LAYOUT1);
+
+ /* change the BCH registers and bch_geometry{} */
+ n = last - first + 1;
+ page_size = meta + (size + ecc_parity_size) * n;
+
+ r1_new &= ~(BM_BCH_FLASH0LAYOUT0_NBLOCKS |
+ BM_BCH_FLASH0LAYOUT0_META_SIZE);
+ r1_new |= BF_BCH_FLASH0LAYOUT0_NBLOCKS(n - 1)
+ | BF_BCH_FLASH0LAYOUT0_META_SIZE(meta);
+ writel(r1_new, bch_regs + HW_BCH_FLASH0LAYOUT0);
+
+ r2_new &= ~BM_BCH_FLASH0LAYOUT1_PAGE_SIZE;
+ r2_new |= BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size);
+ writel(r2_new, bch_regs + HW_BCH_FLASH0LAYOUT1);
+
+ geo->ecc_chunk_count = n;
+ geo->payload_size = n * size;
+ geo->page_size = page_size;
+ geo->auxiliary_status_offset = ALIGN(meta, 4);
+
+ dev_dbg(this->dev, "page:%d(%d:%d)%d, chunk:(%d:%d), BCH PG size:%d\n",
+ page, offs, len, col, first, n, page_size);
+
+ /* Read the subpage now */
+ this->swap_block_mark = false;
+ max_bitflips = gpmi_ecc_read_page(mtd, chip, buf, 0, page);
+
+ /* Restore */
+ writel(r1_old, bch_regs + HW_BCH_FLASH0LAYOUT0);
+ writel(r2_old, bch_regs + HW_BCH_FLASH0LAYOUT1);
+ this->bch_geometry = old_geo;
+ this->swap_block_mark = true;
+
+ return max_bitflips;
+}
+
static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, int oob_required)
{
@@ -1566,6 +1651,17 @@ static int gpmi_init_last(struct gpmi_nand_data *this)
ecc->layout = &gpmi_hw_ecclayout;
/*
+ * We only enable the subpage read when:
+ * (1) the chip is imx6, and
+ * (2) the size of the ECC parity is byte aligned.
+ */
+ if (GPMI_IS_MX6Q(this) &&
+ ((bch_geo->gf_len * bch_geo->ecc_strength) % 8) == 0) {
+ ecc->read_subpage = gpmi_ecc_read_subpage;
+ chip->options |= NAND_SUBPAGE_READ;
+ }
+
+ /*
* Can we enable the extra features? such as EDO or Sync mode.
*
* We do not check the return value now. That's means if we fail in
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
index 31ee7cfbc12b..e78841a2dcc3 100644
--- a/drivers/mtd/nand/mpc5121_nfc.c
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -30,7 +30,6 @@
#include <linux/gfp.h>
#include <linux/delay.h>
#include <linux/err.h>
-#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/mtd/mtd.h>
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index e9a4835c4dd9..dba262bf766f 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -1501,6 +1501,8 @@ static int mxcnd_probe(struct platform_device *pdev)
init_completion(&host->op_completion);
host->irq = platform_get_irq(pdev, 0);
+ if (host->irq < 0)
+ return host->irq;
/*
* Use host->devtype_data->irq_control() here instead of irq_control()
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 9715a7ba164a..9d01c4df838c 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -589,7 +589,8 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
/* Serially input address */
if (column != -1) {
/* Adjust columns for 16 bit buswidth */
- if (chip->options & NAND_BUSWIDTH_16)
+ if (chip->options & NAND_BUSWIDTH_16 &&
+ !nand_opcode_8bits(command))
column >>= 1;
chip->cmd_ctrl(mtd, column, ctrl);
ctrl &= ~NAND_CTRL_CHANGE;
@@ -680,7 +681,8 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
/* Serially input address */
if (column != -1) {
/* Adjust columns for 16 bit buswidth */
- if (chip->options & NAND_BUSWIDTH_16)
+ if (chip->options & NAND_BUSWIDTH_16 &&
+ !nand_opcode_8bits(command))
column >>= 1;
chip->cmd_ctrl(mtd, column, ctrl);
ctrl &= ~NAND_CTRL_CHANGE;
@@ -1160,9 +1162,11 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
* @data_offs: offset of requested data within the page
* @readlen: data length
* @bufpoi: buffer to store read data
+ * @page: page number to read
*/
static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
- uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
+ uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi,
+ int page)
{
int start_step, end_step, num_steps;
uint32_t *eccpos = chip->ecc.layout->eccpos;
@@ -1170,13 +1174,14 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
int data_col_addr, i, gaps = 0;
int datafrag_len, eccfrag_len, aligned_len, aligned_pos;
int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
- int index = 0;
+ int index;
unsigned int max_bitflips = 0;
/* Column address within the page aligned to ECC size (256bytes) */
start_step = data_offs / chip->ecc.size;
end_step = (data_offs + readlen - 1) / chip->ecc.size;
num_steps = end_step - start_step + 1;
+ index = start_step * chip->ecc.bytes;
/* Data size aligned to ECC ecc.size */
datafrag_len = num_steps * chip->ecc.size;
@@ -1213,8 +1218,6 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
* Send the command to read the particular ECC bytes take care
* about buswidth alignment in read_buf.
*/
- index = start_step * chip->ecc.bytes;
-
aligned_pos = eccpos[index] & ~(busw - 1);
aligned_len = eccfrag_len;
if (eccpos[index] & (busw - 1))
@@ -1538,7 +1541,8 @@ read_retry:
else if (!aligned && NAND_HAS_SUBPAGE_READ(chip) &&
!oob)
ret = chip->ecc.read_subpage(mtd, chip,
- col, bytes, bufpoi);
+ col, bytes, bufpoi,
+ page);
else
ret = chip->ecc.read_page(mtd, chip, bufpoi,
oob_required, page);
@@ -2000,7 +2004,7 @@ static int nand_write_page_raw_syndrome(struct mtd_info *mtd,
oob += chip->ecc.prepad;
}
- chip->read_buf(mtd, oob, eccbytes);
+ chip->write_buf(mtd, oob, eccbytes);
oob += eccbytes;
if (chip->ecc.postpad) {
@@ -3063,7 +3067,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
int *busw)
{
struct nand_onfi_params *p = &chip->onfi_params;
- int i;
+ int i, j;
int val;
/* Try ONFI for unknown chip or LP */
@@ -3072,18 +3076,10 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I')
return 0;
- /*
- * ONFI must be probed in 8-bit mode or with NAND_BUSWIDTH_AUTO, not
- * with NAND_BUSWIDTH_16
- */
- if (chip->options & NAND_BUSWIDTH_16) {
- pr_err("ONFI cannot be probed in 16-bit mode; aborting\n");
- return 0;
- }
-
chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
for (i = 0; i < 3; i++) {
- chip->read_buf(mtd, (uint8_t *)p, sizeof(*p));
+ for (j = 0; j < sizeof(*p); j++)
+ ((uint8_t *)p)[j] = chip->read_byte(mtd);
if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 254) ==
le16_to_cpu(p->crc)) {
break;
@@ -3169,6 +3165,87 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
}
/*
+ * Check if the NAND chip is JEDEC compliant, returns 1 if it is, 0 otherwise.
+ */
+static int nand_flash_detect_jedec(struct mtd_info *mtd, struct nand_chip *chip,
+ int *busw)
+{
+ struct nand_jedec_params *p = &chip->jedec_params;
+ struct jedec_ecc_info *ecc;
+ int val;
+ int i, j;
+
+ /* Try JEDEC for unknown chip or LP */
+ chip->cmdfunc(mtd, NAND_CMD_READID, 0x40, -1);
+ if (chip->read_byte(mtd) != 'J' || chip->read_byte(mtd) != 'E' ||
+ chip->read_byte(mtd) != 'D' || chip->read_byte(mtd) != 'E' ||
+ chip->read_byte(mtd) != 'C')
+ return 0;
+
+ chip->cmdfunc(mtd, NAND_CMD_PARAM, 0x40, -1);
+ for (i = 0; i < 3; i++) {
+ for (j = 0; j < sizeof(*p); j++)
+ ((uint8_t *)p)[j] = chip->read_byte(mtd);
+
+ if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 510) ==
+ le16_to_cpu(p->crc))
+ break;
+ }
+
+ if (i == 3) {
+ pr_err("Could not find valid JEDEC parameter page; aborting\n");
+ return 0;
+ }
+
+ /* Check version */
+ val = le16_to_cpu(p->revision);
+ if (val & (1 << 2))
+ chip->jedec_version = 10;
+ else if (val & (1 << 1))
+ chip->jedec_version = 1; /* vendor specific version */
+
+ if (!chip->jedec_version) {
+ pr_info("unsupported JEDEC version: %d\n", val);
+ return 0;
+ }
+
+ sanitize_string(p->manufacturer, sizeof(p->manufacturer));
+ sanitize_string(p->model, sizeof(p->model));
+ if (!mtd->name)
+ mtd->name = p->model;
+
+ mtd->writesize = le32_to_cpu(p->byte_per_page);
+
+ /* Please reference to the comment for nand_flash_detect_onfi. */
+ mtd->erasesize = 1 << (fls(le32_to_cpu(p->pages_per_block)) - 1);
+ mtd->erasesize *= mtd->writesize;
+
+ mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
+
+ /* Please reference to the comment for nand_flash_detect_onfi. */
+ chip->chipsize = 1 << (fls(le32_to_cpu(p->blocks_per_lun)) - 1);
+ chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count;
+ chip->bits_per_cell = p->bits_per_cell;
+
+ if (jedec_feature(chip) & JEDEC_FEATURE_16_BIT_BUS)
+ *busw = NAND_BUSWIDTH_16;
+ else
+ *busw = 0;
+
+ /* ECC info */
+ ecc = &p->ecc_info[0];
+
+ if (ecc->codeword_size >= 9) {
+ chip->ecc_strength_ds = ecc->ecc_bits;
+ chip->ecc_step_ds = 1 << ecc->codeword_size;
+ } else {
+ pr_warn("Invalid codeword size\n");
+ }
+
+ return 1;
+}
+
+/*
* nand_id_has_period - Check if an ID string has a given wraparound period
* @id_data: the ID string
* @arrlen: the length of the @id_data array
@@ -3474,10 +3551,10 @@ static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip,
*/
static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
struct nand_chip *chip,
- int busw,
int *maf_id, int *dev_id,
struct nand_flash_dev *type)
{
+ int busw;
int i, maf_idx;
u8 id_data[8];
@@ -3533,6 +3610,10 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
/* Check is chip is ONFI compliant */
if (nand_flash_detect_onfi(mtd, chip, &busw))
goto ident_done;
+
+ /* Check if the chip is JEDEC compliant */
+ if (nand_flash_detect_jedec(mtd, chip, &busw))
+ goto ident_done;
}
if (!type->name)
@@ -3612,8 +3693,17 @@ ident_done:
pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n",
*maf_id, *dev_id);
- pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
- chip->onfi_version ? chip->onfi_params.model : type->name);
+
+ if (chip->onfi_version)
+ pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
+ chip->onfi_params.model);
+ else if (chip->jedec_version)
+ pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
+ chip->jedec_params.model);
+ else
+ pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
+ type->name);
+
pr_info("%dMiB, %s, page size: %d, OOB size: %d\n",
(int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC",
mtd->writesize, mtd->oobsize);
@@ -3634,18 +3724,16 @@ ident_done:
int nand_scan_ident(struct mtd_info *mtd, int maxchips,
struct nand_flash_dev *table)
{
- int i, busw, nand_maf_id, nand_dev_id;
+ int i, nand_maf_id, nand_dev_id;
struct nand_chip *chip = mtd->priv;
struct nand_flash_dev *type;
- /* Get buswidth to select the correct functions */
- busw = chip->options & NAND_BUSWIDTH_16;
/* Set the default functions */
- nand_set_defaults(chip, busw);
+ nand_set_defaults(chip, chip->options & NAND_BUSWIDTH_16);
/* Read the flash type */
- type = nand_get_flash_type(mtd, chip, busw,
- &nand_maf_id, &nand_dev_id, table);
+ type = nand_get_flash_type(mtd, chip, &nand_maf_id,
+ &nand_dev_id, table);
if (IS_ERR(type)) {
if (!(chip->options & NAND_SCAN_SILENT_NODEV))
@@ -3696,15 +3784,26 @@ int nand_scan_tail(struct mtd_info *mtd)
int i;
struct nand_chip *chip = mtd->priv;
struct nand_ecc_ctrl *ecc = &chip->ecc;
+ struct nand_buffers *nbuf;
/* New bad blocks should be marked in OOB, flash-based BBT, or both */
BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
!(chip->bbt_options & NAND_BBT_USE_FLASH));
- if (!(chip->options & NAND_OWN_BUFFERS))
- chip->buffers = kmalloc(sizeof(*chip->buffers), GFP_KERNEL);
- if (!chip->buffers)
- return -ENOMEM;
+ if (!(chip->options & NAND_OWN_BUFFERS)) {
+ nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize
+ + mtd->oobsize * 3, GFP_KERNEL);
+ if (!nbuf)
+ return -ENOMEM;
+ nbuf->ecccalc = (uint8_t *)(nbuf + 1);
+ nbuf->ecccode = nbuf->ecccalc + mtd->oobsize;
+ nbuf->databuf = nbuf->ecccode + mtd->oobsize;
+
+ chip->buffers = nbuf;
+ } else {
+ if (!chip->buffers)
+ return -ENOMEM;
+ }
/* Set the internal oob buffer location, just after the page data */
chip->oob_poi = chip->buffers->databuf + mtd->writesize;
@@ -3825,7 +3924,7 @@ int nand_scan_tail(struct mtd_info *mtd)
case NAND_ECC_SOFT_BCH:
if (!mtd_nand_has_bch()) {
- pr_warn("CONFIG_MTD_ECC_BCH not enabled\n");
+ pr_warn("CONFIG_MTD_NAND_ECC_BCH not enabled\n");
BUG();
}
ecc->calculate = nand_bch_calculate_ecc;
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index daa2faacd7d0..3d7c89fc1031 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -43,6 +43,9 @@ struct nand_flash_dev nand_flash_ids[] = {
{"TC58NVG6D2 64G 3.3V 8-bit",
{ .id = {0x98, 0xde, 0x94, 0x82, 0x76, 0x56, 0x04, 0x20} },
SZ_8K, SZ_8K, SZ_2M, 0, 8, 640, NAND_ECC_INFO(40, SZ_1K) },
+ {"SDTNRGAMA 64G 3.3V 8-bit",
+ { .id = {0x45, 0xde, 0x94, 0x93, 0x76, 0x50} },
+ SZ_16K, SZ_8K, SZ_4M, 0, 6, 1280, NAND_ECC_INFO(40, SZ_1K) },
LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS),
LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
diff --git a/drivers/mtd/nand/nuc900_nand.c b/drivers/mtd/nand/nuc900_nand.c
index 9ee09a8177c6..e8a5fffd6ab2 100644
--- a/drivers/mtd/nand/nuc900_nand.c
+++ b/drivers/mtd/nand/nuc900_nand.c
@@ -10,7 +10,6 @@
*/
#include <linux/slab.h>
-#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@@ -152,7 +151,8 @@ static void nuc900_nand_command_lp(struct mtd_info *mtd, unsigned int command,
if (column != -1 || page_addr != -1) {
if (column != -1) {
- if (chip->options & NAND_BUSWIDTH_16)
+ if (chip->options & NAND_BUSWIDTH_16 &&
+ !nand_opcode_8bits(command))
column >>= 1;
write_addr_reg(nand, column);
write_addr_reg(nand, column >> 8 | ENDADDR);
@@ -225,7 +225,7 @@ static void nuc900_nand_enable(struct nuc900_nand *nand)
val = __raw_readl(nand->reg + REG_FMICSR);
if (!(val & NAND_EN))
- __raw_writel(val | NAND_EN, REG_FMICSR);
+ __raw_writel(val | NAND_EN, nand->reg + REG_FMICSR);
val = __raw_readl(nand->reg + REG_SMCSR);
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index bf642ceef681..1ff49b80bdaf 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -118,14 +118,9 @@
#define OMAP24XX_DMA_GPMC 4
-#define BCH8_MAX_ERROR 8 /* upto 8 bit correctable */
-#define BCH4_MAX_ERROR 4 /* upto 4 bit correctable */
-
#define SECTOR_BYTES 512
/* 4 bit padding to make byte aligned, 56 = 52 + 4 */
#define BCH4_BIT_PAD 4
-#define BCH8_ECC_MAX ((SECTOR_BYTES + BCH8_ECC_OOB_BYTES) * 8)
-#define BCH4_ECC_MAX ((SECTOR_BYTES + BCH4_ECC_OOB_BYTES) * 8)
/* GPMC ecc engine settings for read */
#define BCH_WRAPMODE_1 1 /* BCH wrap mode 1 */
@@ -159,7 +154,7 @@ struct omap_nand_info {
int gpmc_cs;
unsigned long phys_base;
- unsigned long mem_size;
+ enum omap_ecc ecc_opt;
struct completion comp;
struct dma_chan *dma;
int gpmc_irq_fifo;
@@ -172,7 +167,6 @@ struct omap_nand_info {
int buf_len;
struct gpmc_nand_regs reg;
/* fields specific for BCHx_HW ECC scheme */
- bool is_elm_used;
struct device *elm_dev;
struct device_node *of_node;
};
@@ -1043,9 +1037,8 @@ static int omap_dev_ready(struct mtd_info *mtd)
}
}
-#if defined(CONFIG_MTD_NAND_ECC_BCH) || defined(CONFIG_MTD_NAND_OMAP_BCH)
/**
- * omap3_enable_hwecc_bch - Program OMAP3 GPMC to perform BCH ECC correction
+ * omap_enable_hwecc_bch - Program GPMC to perform BCH ECC calculation
* @mtd: MTD device structure
* @mode: Read/Write mode
*
@@ -1056,50 +1049,73 @@ static int omap_dev_ready(struct mtd_info *mtd)
* eccsize0 = 0 (no additional protected byte in spare area)
* eccsize1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
*/
-static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode)
+static void __maybe_unused omap_enable_hwecc_bch(struct mtd_info *mtd, int mode)
{
- int nerrors;
+ unsigned int bch_type;
unsigned int dev_width, nsectors;
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
+ enum omap_ecc ecc_opt = info->ecc_opt;
struct nand_chip *chip = mtd->priv;
u32 val, wr_mode;
unsigned int ecc_size1, ecc_size0;
- /* Using wrapping mode 6 for writing */
- wr_mode = BCH_WRAPMODE_6;
-
- /*
- * ECC engine enabled for valid ecc_size0 nibbles
- * and disabled for ecc_size1 nibbles.
- */
- ecc_size0 = BCH_ECC_SIZE0;
- ecc_size1 = BCH_ECC_SIZE1;
-
- /* Perform ecc calculation on 512-byte sector */
- nsectors = 1;
-
- /* Update number of error correction */
- nerrors = info->nand.ecc.strength;
-
- /* Multi sector reading/writing for NAND flash with page size < 4096 */
- if (info->is_elm_used && (mtd->writesize <= 4096)) {
+ /* GPMC configurations for calculating ECC */
+ switch (ecc_opt) {
+ case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
+ bch_type = 0;
+ nsectors = 1;
+ if (mode == NAND_ECC_READ) {
+ wr_mode = BCH_WRAPMODE_6;
+ ecc_size0 = BCH_ECC_SIZE0;
+ ecc_size1 = BCH_ECC_SIZE1;
+ } else {
+ wr_mode = BCH_WRAPMODE_6;
+ ecc_size0 = BCH_ECC_SIZE0;
+ ecc_size1 = BCH_ECC_SIZE1;
+ }
+ break;
+ case OMAP_ECC_BCH4_CODE_HW:
+ bch_type = 0;
+ nsectors = chip->ecc.steps;
if (mode == NAND_ECC_READ) {
- /* Using wrapping mode 1 for reading */
- wr_mode = BCH_WRAPMODE_1;
-
- /*
- * ECC engine enabled for ecc_size0 nibbles
- * and disabled for ecc_size1 nibbles.
- */
- ecc_size0 = (nerrors == 8) ?
- BCH8R_ECC_SIZE0 : BCH4R_ECC_SIZE0;
- ecc_size1 = (nerrors == 8) ?
- BCH8R_ECC_SIZE1 : BCH4R_ECC_SIZE1;
+ wr_mode = BCH_WRAPMODE_1;
+ ecc_size0 = BCH4R_ECC_SIZE0;
+ ecc_size1 = BCH4R_ECC_SIZE1;
+ } else {
+ wr_mode = BCH_WRAPMODE_6;
+ ecc_size0 = BCH_ECC_SIZE0;
+ ecc_size1 = BCH_ECC_SIZE1;
}
-
- /* Perform ecc calculation for one page (< 4096) */
- nsectors = info->nand.ecc.steps;
+ break;
+ case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+ bch_type = 1;
+ nsectors = 1;
+ if (mode == NAND_ECC_READ) {
+ wr_mode = BCH_WRAPMODE_6;
+ ecc_size0 = BCH_ECC_SIZE0;
+ ecc_size1 = BCH_ECC_SIZE1;
+ } else {
+ wr_mode = BCH_WRAPMODE_6;
+ ecc_size0 = BCH_ECC_SIZE0;
+ ecc_size1 = BCH_ECC_SIZE1;
+ }
+ break;
+ case OMAP_ECC_BCH8_CODE_HW:
+ bch_type = 1;
+ nsectors = chip->ecc.steps;
+ if (mode == NAND_ECC_READ) {
+ wr_mode = BCH_WRAPMODE_1;
+ ecc_size0 = BCH8R_ECC_SIZE0;
+ ecc_size1 = BCH8R_ECC_SIZE1;
+ } else {
+ wr_mode = BCH_WRAPMODE_6;
+ ecc_size0 = BCH_ECC_SIZE0;
+ ecc_size1 = BCH_ECC_SIZE1;
+ }
+ break;
+ default:
+ return;
}
writel(ECC1, info->reg.gpmc_ecc_control);
@@ -1112,7 +1128,7 @@ static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode)
/* BCH configuration */
val = ((1 << 16) | /* enable BCH */
- (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */
+ (bch_type << 12) | /* BCH4/BCH8/BCH16 */
(wr_mode << 8) | /* wrap mode */
(dev_width << 7) | /* bus width */
(((nsectors-1) & 0x7) << 4) | /* number of sectors */
@@ -1124,132 +1140,40 @@ static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode)
/* Clear ecc and enable bits */
writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control);
}
-#endif
-
-#ifdef CONFIG_MTD_NAND_ECC_BCH
-/**
- * omap3_calculate_ecc_bch4 - Generate 7 bytes of ECC bytes
- * @mtd: MTD device structure
- * @dat: The pointer to data on which ecc is computed
- * @ecc_code: The ecc_code buffer
- */
-static int omap3_calculate_ecc_bch4(struct mtd_info *mtd, const u_char *dat,
- u_char *ecc_code)
-{
- struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
- mtd);
- unsigned long nsectors, val1, val2;
- int i;
-
- nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
-
- for (i = 0; i < nsectors; i++) {
- /* Read hw-computed remainder */
- val1 = readl(info->reg.gpmc_bch_result0[i]);
- val2 = readl(info->reg.gpmc_bch_result1[i]);
-
- /*
- * Add constant polynomial to remainder, in order to get an ecc
- * sequence of 0xFFs for a buffer filled with 0xFFs; and
- * left-justify the resulting polynomial.
- */
- *ecc_code++ = 0x28 ^ ((val2 >> 12) & 0xFF);
- *ecc_code++ = 0x13 ^ ((val2 >> 4) & 0xFF);
- *ecc_code++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF));
- *ecc_code++ = 0x39 ^ ((val1 >> 20) & 0xFF);
- *ecc_code++ = 0x96 ^ ((val1 >> 12) & 0xFF);
- *ecc_code++ = 0xac ^ ((val1 >> 4) & 0xFF);
- *ecc_code++ = 0x7f ^ ((val1 & 0xF) << 4);
- }
-
- return 0;
-}
+static u8 bch4_polynomial[] = {0x28, 0x13, 0xcc, 0x39, 0x96, 0xac, 0x7f};
+static u8 bch8_polynomial[] = {0xef, 0x51, 0x2e, 0x09, 0xed, 0x93, 0x9a, 0xc2,
+ 0x97, 0x79, 0xe5, 0x24, 0xb5};
/**
- * omap3_calculate_ecc_bch8 - Generate 13 bytes of ECC bytes
- * @mtd: MTD device structure
- * @dat: The pointer to data on which ecc is computed
- * @ecc_code: The ecc_code buffer
- */
-static int omap3_calculate_ecc_bch8(struct mtd_info *mtd, const u_char *dat,
- u_char *ecc_code)
-{
- struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
- mtd);
- unsigned long nsectors, val1, val2, val3, val4;
- int i;
-
- nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
-
- for (i = 0; i < nsectors; i++) {
-
- /* Read hw-computed remainder */
- val1 = readl(info->reg.gpmc_bch_result0[i]);
- val2 = readl(info->reg.gpmc_bch_result1[i]);
- val3 = readl(info->reg.gpmc_bch_result2[i]);
- val4 = readl(info->reg.gpmc_bch_result3[i]);
-
- /*
- * Add constant polynomial to remainder, in order to get an ecc
- * sequence of 0xFFs for a buffer filled with 0xFFs.
- */
- *ecc_code++ = 0xef ^ (val4 & 0xFF);
- *ecc_code++ = 0x51 ^ ((val3 >> 24) & 0xFF);
- *ecc_code++ = 0x2e ^ ((val3 >> 16) & 0xFF);
- *ecc_code++ = 0x09 ^ ((val3 >> 8) & 0xFF);
- *ecc_code++ = 0xed ^ (val3 & 0xFF);
- *ecc_code++ = 0x93 ^ ((val2 >> 24) & 0xFF);
- *ecc_code++ = 0x9a ^ ((val2 >> 16) & 0xFF);
- *ecc_code++ = 0xc2 ^ ((val2 >> 8) & 0xFF);
- *ecc_code++ = 0x97 ^ (val2 & 0xFF);
- *ecc_code++ = 0x79 ^ ((val1 >> 24) & 0xFF);
- *ecc_code++ = 0xe5 ^ ((val1 >> 16) & 0xFF);
- *ecc_code++ = 0x24 ^ ((val1 >> 8) & 0xFF);
- *ecc_code++ = 0xb5 ^ (val1 & 0xFF);
- }
-
- return 0;
-}
-#endif /* CONFIG_MTD_NAND_ECC_BCH */
-
-#ifdef CONFIG_MTD_NAND_OMAP_BCH
-/**
- * omap3_calculate_ecc_bch - Generate bytes of ECC bytes
+ * omap_calculate_ecc_bch - Generate bytes of ECC bytes
* @mtd: MTD device structure
* @dat: The pointer to data on which ecc is computed
* @ecc_code: The ecc_code buffer
*
* Support calculating of BCH4/8 ecc vectors for the page
*/
-static int omap3_calculate_ecc_bch(struct mtd_info *mtd, const u_char *dat,
- u_char *ecc_code)
+static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info *mtd,
+ const u_char *dat, u_char *ecc_calc)
{
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
+ int eccbytes = info->nand.ecc.bytes;
+ struct gpmc_nand_regs *gpmc_regs = &info->reg;
+ u8 *ecc_code;
unsigned long nsectors, bch_val1, bch_val2, bch_val3, bch_val4;
- int i, eccbchtsel;
+ int i;
nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
- /*
- * find BCH scheme used
- * 0 -> BCH4
- * 1 -> BCH8
- */
- eccbchtsel = ((readl(info->reg.gpmc_ecc_config) >> 12) & 0x3);
-
for (i = 0; i < nsectors; i++) {
-
- /* Read hw-computed remainder */
- bch_val1 = readl(info->reg.gpmc_bch_result0[i]);
- bch_val2 = readl(info->reg.gpmc_bch_result1[i]);
- if (eccbchtsel) {
- bch_val3 = readl(info->reg.gpmc_bch_result2[i]);
- bch_val4 = readl(info->reg.gpmc_bch_result3[i]);
- }
-
- if (eccbchtsel) {
- /* BCH8 ecc scheme */
+ ecc_code = ecc_calc;
+ switch (info->ecc_opt) {
+ case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+ case OMAP_ECC_BCH8_CODE_HW:
+ bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]);
+ bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]);
+ bch_val3 = readl(gpmc_regs->gpmc_bch_result2[i]);
+ bch_val4 = readl(gpmc_regs->gpmc_bch_result3[i]);
*ecc_code++ = (bch_val4 & 0xFF);
*ecc_code++ = ((bch_val3 >> 24) & 0xFF);
*ecc_code++ = ((bch_val3 >> 16) & 0xFF);
@@ -1263,14 +1187,11 @@ static int omap3_calculate_ecc_bch(struct mtd_info *mtd, const u_char *dat,
*ecc_code++ = ((bch_val1 >> 16) & 0xFF);
*ecc_code++ = ((bch_val1 >> 8) & 0xFF);
*ecc_code++ = (bch_val1 & 0xFF);
- /*
- * Setting 14th byte to zero to handle
- * erased page & maintain compatibility
- * with RBL
- */
- *ecc_code++ = 0x0;
- } else {
- /* BCH4 ecc scheme */
+ break;
+ case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
+ case OMAP_ECC_BCH4_CODE_HW:
+ bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]);
+ bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]);
*ecc_code++ = ((bch_val2 >> 12) & 0xFF);
*ecc_code++ = ((bch_val2 >> 4) & 0xFF);
*ecc_code++ = ((bch_val2 & 0xF) << 4) |
@@ -1279,12 +1200,38 @@ static int omap3_calculate_ecc_bch(struct mtd_info *mtd, const u_char *dat,
*ecc_code++ = ((bch_val1 >> 12) & 0xFF);
*ecc_code++ = ((bch_val1 >> 4) & 0xFF);
*ecc_code++ = ((bch_val1 & 0xF) << 4);
- /*
- * Setting 8th byte to zero to handle
- * erased page
- */
- *ecc_code++ = 0x0;
+ break;
+ default:
+ return -EINVAL;
}
+
+ /* ECC scheme specific syndrome customizations */
+ switch (info->ecc_opt) {
+ case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
+ /* Add constant polynomial to remainder, so that
+ * ECC of blank pages results in 0x0 on reading back */
+ for (i = 0; i < eccbytes; i++)
+ ecc_calc[i] ^= bch4_polynomial[i];
+ break;
+ case OMAP_ECC_BCH4_CODE_HW:
+ /* Set 8th ECC byte as 0x0 for ROM compatibility */
+ ecc_calc[eccbytes - 1] = 0x0;
+ break;
+ case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+ /* Add constant polynomial to remainder, so that
+ * ECC of blank pages results in 0x0 on reading back */
+ for (i = 0; i < eccbytes; i++)
+ ecc_calc[i] ^= bch8_polynomial[i];
+ break;
+ case OMAP_ECC_BCH8_CODE_HW:
+ /* Set 14th ECC byte as 0x0 for ROM compatibility */
+ ecc_calc[eccbytes - 1] = 0x0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ecc_calc += eccbytes;
}
return 0;
@@ -1329,6 +1276,7 @@ static int erased_sector_bitflips(u_char *data, u_char *oob,
return flip_bits;
}
+#ifdef CONFIG_MTD_NAND_OMAP_BCH
/**
* omap_elm_correct_data - corrects page data area in case error reported
* @mtd: MTD device structure
@@ -1337,55 +1285,46 @@ static int erased_sector_bitflips(u_char *data, u_char *oob,
* @calc_ecc: ecc read from HW ECC registers
*
* Calculated ecc vector reported as zero in case of non-error pages.
- * In case of error/erased pages non-zero error vector is reported.
- * In case of non-zero ecc vector, check read_ecc at fixed offset
- * (x = 13/7 in case of BCH8/4 == 0) to find page programmed or not.
- * To handle bit flips in this data, count the number of 0's in
- * read_ecc[x] and check if it greater than 4. If it is less, it is
- * programmed page, else erased page.
- *
- * 1. If page is erased, check with standard ecc vector (ecc vector
- * for erased page to find any bit flip). If check fails, bit flip
- * is present in erased page. Count the bit flips in erased page and
- * if it falls under correctable level, report page with 0xFF and
- * update the correctable bit information.
- * 2. If error is reported on programmed page, update elm error
- * vector and correct the page with ELM error correction routine.
- *
+ * In case of non-zero ecc vector, first filter out erased-pages, and
+ * then process data via ELM to detect bit-flips.
*/
static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data,
u_char *read_ecc, u_char *calc_ecc)
{
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
+ struct nand_ecc_ctrl *ecc = &info->nand.ecc;
int eccsteps = info->nand.ecc.steps;
int i , j, stat = 0;
- int eccsize, eccflag, ecc_vector_size;
+ int eccflag, actual_eccbytes;
struct elm_errorvec err_vec[ERROR_VECTOR_MAX];
u_char *ecc_vec = calc_ecc;
u_char *spare_ecc = read_ecc;
u_char *erased_ecc_vec;
- enum bch_ecc type;
+ u_char *buf;
+ int bitflip_count;
bool is_error_reported = false;
+ u32 bit_pos, byte_pos, error_max, pos;
+ int err;
- /* Initialize elm error vector to zero */
- memset(err_vec, 0, sizeof(err_vec));
-
- if (info->nand.ecc.strength == BCH8_MAX_ERROR) {
- type = BCH8_ECC;
- erased_ecc_vec = bch8_vector;
- } else {
- type = BCH4_ECC;
+ switch (info->ecc_opt) {
+ case OMAP_ECC_BCH4_CODE_HW:
+ /* omit 7th ECC byte reserved for ROM code compatibility */
+ actual_eccbytes = ecc->bytes - 1;
erased_ecc_vec = bch4_vector;
+ break;
+ case OMAP_ECC_BCH8_CODE_HW:
+ /* omit 14th ECC byte reserved for ROM code compatibility */
+ actual_eccbytes = ecc->bytes - 1;
+ erased_ecc_vec = bch8_vector;
+ break;
+ default:
+ pr_err("invalid driver configuration\n");
+ return -EINVAL;
}
- ecc_vector_size = info->nand.ecc.bytes;
-
- /*
- * Remove extra byte padding for BCH8 RBL
- * compatibility and erased page handling
- */
- eccsize = ecc_vector_size - 1;
+ /* Initialize elm error vector to zero */
+ memset(err_vec, 0, sizeof(err_vec));
for (i = 0; i < eccsteps ; i++) {
eccflag = 0; /* initialize eccflag */
@@ -1394,8 +1333,7 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data,
* Check any error reported,
* In case of error, non zero ecc reported.
*/
-
- for (j = 0; (j < eccsize); j++) {
+ for (j = 0; j < actual_eccbytes; j++) {
if (calc_ecc[j] != 0) {
eccflag = 1; /* non zero ecc, error present */
break;
@@ -1403,50 +1341,43 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data,
}
if (eccflag == 1) {
- /*
- * Set threshold to minimum of 4, half of ecc.strength/2
- * to allow max bit flip in byte to 4
- */
- unsigned int threshold = min_t(unsigned int, 4,
- info->nand.ecc.strength / 2);
-
- /*
- * Check data area is programmed by counting
- * number of 0's at fixed offset in spare area.
- * Checking count of 0's against threshold.
- * In case programmed page expects at least threshold
- * zeros in byte.
- * If zeros are less than threshold for programmed page/
- * zeros are more than threshold erased page, either
- * case page reported as uncorrectable.
- */
- if (hweight8(~read_ecc[eccsize]) >= threshold) {
+ if (memcmp(calc_ecc, erased_ecc_vec,
+ actual_eccbytes) == 0) {
/*
- * Update elm error vector as
- * data area is programmed
+ * calc_ecc[] matches pattern for ECC(all 0xff)
+ * so this is definitely an erased-page
*/
- err_vec[i].error_reported = true;
- is_error_reported = true;
} else {
- /* Error reported in erased page */
- int bitflip_count;
- u_char *buf = &data[info->nand.ecc.size * i];
-
- if (memcmp(calc_ecc, erased_ecc_vec, eccsize)) {
- bitflip_count = erased_sector_bitflips(
- buf, read_ecc, info);
-
- if (bitflip_count)
- stat += bitflip_count;
- else
- return -EINVAL;
+ buf = &data[info->nand.ecc.size * i];
+ /*
+ * count number of 0-bits in read_buf.
+ * This check can be removed once a similar
+ * check is introduced in generic NAND driver
+ */
+ bitflip_count = erased_sector_bitflips(
+ buf, read_ecc, info);
+ if (bitflip_count) {
+ /*
+ * number of 0-bits within ECC limits
+ * So this may be an erased-page
+ */
+ stat += bitflip_count;
+ } else {
+ /*
+ * Too many 0-bits. It may be a
+ * - programmed-page, OR
+ * - erased-page with many bit-flips
+ * So this page requires check by ELM
+ */
+ err_vec[i].error_reported = true;
+ is_error_reported = true;
}
}
}
/* Update the ecc vector */
- calc_ecc += ecc_vector_size;
- read_ecc += ecc_vector_size;
+ calc_ecc += ecc->bytes;
+ read_ecc += ecc->bytes;
}
/* Check if any error reported */
@@ -1456,23 +1387,26 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data,
/* Decode BCH error using ELM module */
elm_decode_bch_error_page(info->elm_dev, ecc_vec, err_vec);
+ err = 0;
for (i = 0; i < eccsteps; i++) {
- if (err_vec[i].error_reported) {
+ if (err_vec[i].error_uncorrectable) {
+ pr_err("nand: uncorrectable bit-flips found\n");
+ err = -EBADMSG;
+ } else if (err_vec[i].error_reported) {
for (j = 0; j < err_vec[i].error_count; j++) {
- u32 bit_pos, byte_pos, error_max, pos;
-
- if (type == BCH8_ECC)
- error_max = BCH8_ECC_MAX;
- else
- error_max = BCH4_ECC_MAX;
-
- if (info->nand.ecc.strength == BCH8_MAX_ERROR)
- pos = err_vec[i].error_loc[j];
- else
- /* Add 4 to take care 4 bit padding */
+ switch (info->ecc_opt) {
+ case OMAP_ECC_BCH4_CODE_HW:
+ /* Add 4 bits to take care of padding */
pos = err_vec[i].error_loc[j] +
BCH4_BIT_PAD;
-
+ break;
+ case OMAP_ECC_BCH8_CODE_HW:
+ pos = err_vec[i].error_loc[j];
+ break;
+ default:
+ return -EINVAL;
+ }
+ error_max = (ecc->size + actual_eccbytes) * 8;
/* Calculate bit position of error */
bit_pos = pos % 8;
@@ -1480,13 +1414,22 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data,
byte_pos = (error_max - pos - 1) / 8;
if (pos < error_max) {
- if (byte_pos < 512)
+ if (byte_pos < 512) {
+ pr_debug("bitflip@dat[%d]=%x\n",
+ byte_pos, data[byte_pos]);
data[byte_pos] ^= 1 << bit_pos;
- else
+ } else {
+ pr_debug("bitflip@oob[%d]=%x\n",
+ (byte_pos - 512),
+ spare_ecc[byte_pos - 512]);
spare_ecc[byte_pos - 512] ^=
1 << bit_pos;
+ }
+ } else {
+ pr_err("invalid bit-flip @ %d:%d\n",
+ byte_pos, bit_pos);
+ err = -EBADMSG;
}
- /* else, not interested to correct ecc */
}
}
@@ -1494,16 +1437,11 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data,
stat += err_vec[i].error_count;
/* Update page data with sector size */
- data += info->nand.ecc.size;
- spare_ecc += ecc_vector_size;
+ data += ecc->size;
+ spare_ecc += ecc->bytes;
}
- for (i = 0; i < eccsteps; i++)
- /* Return error if uncorrectable error present */
- if (err_vec[i].error_uncorrectable)
- return -EINVAL;
-
- return stat;
+ return (err) ? err : stat;
}
/**
@@ -1601,7 +1539,8 @@ static int is_elm_present(struct omap_nand_info *info,
struct device_node *elm_node, enum bch_ecc bch_type)
{
struct platform_device *pdev;
- info->is_elm_used = false;
+ struct nand_ecc_ctrl *ecc = &info->nand.ecc;
+ int err;
/* check whether elm-id is passed via DT */
if (!elm_node) {
pr_err("nand: error: ELM DT node not found\n");
@@ -1615,10 +1554,10 @@ static int is_elm_present(struct omap_nand_info *info,
}
/* ELM module available, now configure it */
info->elm_dev = &pdev->dev;
- if (elm_config(info->elm_dev, bch_type))
- return -ENODEV;
- info->is_elm_used = true;
- return 0;
+ err = elm_config(info->elm_dev, bch_type,
+ (info->mtd.writesize / ecc->size), ecc->size, ecc->bytes);
+
+ return err;
}
#endif /* CONFIG_MTD_NAND_ECC_BCH */
@@ -1657,6 +1596,7 @@ static int omap_nand_probe(struct platform_device *pdev)
info->gpmc_cs = pdata->cs;
info->reg = pdata->reg;
info->of_node = pdata->of_node;
+ info->ecc_opt = pdata->ecc_opt;
mtd = &info->mtd;
mtd->priv = &info->nand;
mtd->name = dev_name(&pdev->dev);
@@ -1666,27 +1606,11 @@ static int omap_nand_probe(struct platform_device *pdev)
nand_chip->options |= NAND_SKIP_BBTSCAN;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (res == NULL) {
- err = -EINVAL;
- dev_err(&pdev->dev, "error getting memory resource\n");
- goto return_error;
- }
+ nand_chip->IO_ADDR_R = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(nand_chip->IO_ADDR_R))
+ return PTR_ERR(nand_chip->IO_ADDR_R);
info->phys_base = res->start;
- info->mem_size = resource_size(res);
-
- if (!devm_request_mem_region(&pdev->dev, info->phys_base,
- info->mem_size, pdev->dev.driver->name)) {
- err = -EBUSY;
- goto return_error;
- }
-
- nand_chip->IO_ADDR_R = devm_ioremap(&pdev->dev, info->phys_base,
- info->mem_size);
- if (!nand_chip->IO_ADDR_R) {
- err = -ENOMEM;
- goto return_error;
- }
nand_chip->controller = &info->controller;
@@ -1812,7 +1736,7 @@ static int omap_nand_probe(struct platform_device *pdev)
/* populate MTD interface based on ECC scheme */
nand_chip->ecc.layout = &omap_oobinfo;
ecclayout = &omap_oobinfo;
- switch (pdata->ecc_opt) {
+ switch (info->ecc_opt) {
case OMAP_ECC_HAM1_CODE_HW:
pr_info("nand: using OMAP_ECC_HAM1_CODE_HW\n");
nand_chip->ecc.mode = NAND_ECC_HW;
@@ -1844,9 +1768,9 @@ static int omap_nand_probe(struct platform_device *pdev)
nand_chip->ecc.size = 512;
nand_chip->ecc.bytes = 7;
nand_chip->ecc.strength = 4;
- nand_chip->ecc.hwctl = omap3_enable_hwecc_bch;
+ nand_chip->ecc.hwctl = omap_enable_hwecc_bch;
nand_chip->ecc.correct = nand_bch_correct_data;
- nand_chip->ecc.calculate = omap3_calculate_ecc_bch4;
+ nand_chip->ecc.calculate = omap_calculate_ecc_bch;
/* define ECC layout */
ecclayout->eccbytes = nand_chip->ecc.bytes *
(mtd->writesize /
@@ -1884,9 +1808,9 @@ static int omap_nand_probe(struct platform_device *pdev)
/* 14th bit is kept reserved for ROM-code compatibility */
nand_chip->ecc.bytes = 7 + 1;
nand_chip->ecc.strength = 4;
- nand_chip->ecc.hwctl = omap3_enable_hwecc_bch;
+ nand_chip->ecc.hwctl = omap_enable_hwecc_bch;
nand_chip->ecc.correct = omap_elm_correct_data;
- nand_chip->ecc.calculate = omap3_calculate_ecc_bch;
+ nand_chip->ecc.calculate = omap_calculate_ecc_bch;
nand_chip->ecc.read_page = omap_read_page_bch;
nand_chip->ecc.write_page = omap_write_page_bch;
/* define ECC layout */
@@ -1919,9 +1843,9 @@ static int omap_nand_probe(struct platform_device *pdev)
nand_chip->ecc.size = 512;
nand_chip->ecc.bytes = 13;
nand_chip->ecc.strength = 8;
- nand_chip->ecc.hwctl = omap3_enable_hwecc_bch;
+ nand_chip->ecc.hwctl = omap_enable_hwecc_bch;
nand_chip->ecc.correct = nand_bch_correct_data;
- nand_chip->ecc.calculate = omap3_calculate_ecc_bch8;
+ nand_chip->ecc.calculate = omap_calculate_ecc_bch;
/* define ECC layout */
ecclayout->eccbytes = nand_chip->ecc.bytes *
(mtd->writesize /
@@ -1960,9 +1884,9 @@ static int omap_nand_probe(struct platform_device *pdev)
/* 14th bit is kept reserved for ROM-code compatibility */
nand_chip->ecc.bytes = 13 + 1;
nand_chip->ecc.strength = 8;
- nand_chip->ecc.hwctl = omap3_enable_hwecc_bch;
+ nand_chip->ecc.hwctl = omap_enable_hwecc_bch;
nand_chip->ecc.correct = omap_elm_correct_data;
- nand_chip->ecc.calculate = omap3_calculate_ecc_bch;
+ nand_chip->ecc.calculate = omap_calculate_ecc_bch;
nand_chip->ecc.read_page = omap_read_page_bch;
nand_chip->ecc.write_page = omap_write_page_bch;
/* This ECC scheme requires ELM H/W block */
diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c
index 90f871acb0ef..2c98f9da7471 100644
--- a/drivers/mtd/nand/pasemi_nand.c
+++ b/drivers/mtd/nand/pasemi_nand.c
@@ -23,7 +23,6 @@
#undef DEBUG
#include <linux/slab.h>
-#include <linux/init.h>
#include <linux/module.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 2a7a0b27ac38..7588fe2c127f 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -38,7 +38,6 @@
#include <linux/platform_data/mtd-nand-pxa3xx.h>
-#define NAND_DEV_READY_TIMEOUT 50
#define CHIP_DELAY_TIMEOUT (2 * HZ/10)
#define NAND_STOP_DELAY (2 * HZ/50)
#define PAGE_CHUNK_SIZE (2048)
@@ -1531,7 +1530,7 @@ KEEP_CONFIG:
if (!ret) {
dev_err(&info->pdev->dev,
"ECC strength %d at page size %d is not supported\n",
- chip->ecc_strength_ds, mtd->writesize);
+ ecc_strength, mtd->writesize);
return -ENODEV;
}
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index f0918e7411d9..79acbb8691b5 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -29,7 +29,6 @@
#include <linux/module.h>
#include <linux/types.h>
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/io.h>