UBI: amend commentaries

Hch asked not to use "unit" for sub-systems, let it be so.
Also some other commentaries modifications.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>

1 files changed, 47 insertions, 47 deletions

diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index cc8fe2934d2b..761952ba125b 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -19,22 +19,22 @@
  */
 
 /*
- * UBI wear-leveling unit.
+ * UBI wear-leveling sub-system.
  *
- * This unit is responsible for wear-leveling. It works in terms of physical
- * eraseblocks and erase counters and knows nothing about logical eraseblocks,
- * volumes, etc. From this unit's perspective all physical eraseblocks are of
- * two types - used and free. Used physical eraseblocks are those that were
- * "get" by the 'ubi_wl_get_peb()' function, and free physical eraseblocks are
- * those that were put by the 'ubi_wl_put_peb()' function.
+ * This sub-system is responsible for wear-leveling. It works in terms of
+ * physical* eraseblocks and erase counters and knows nothing about logical
+ * eraseblocks, volumes, etc. From this sub-system's perspective all physical
+ * eraseblocks are of two types - used and free. Used physical eraseblocks are
+ * those that were "get" by the 'ubi_wl_get_peb()' function, and free physical
+ * eraseblocks are those that were put by the 'ubi_wl_put_peb()' function.
  *
  * Physical eraseblocks returned by 'ubi_wl_get_peb()' have only erase counter
- * header. The rest of the physical eraseblock contains only 0xFF bytes.
+ * header. The rest of the physical eraseblock contains only %0xFF bytes.
  *
- * When physical eraseblocks are returned to the WL unit by means of the
+ * When physical eraseblocks are returned to the WL sub-system by means of the
  * 'ubi_wl_put_peb()' function, they are scheduled for erasure. The erasure is
  * done asynchronously in context of the per-UBI device background thread,
- * which is also managed by the WL unit.
+ * which is also managed by the WL sub-system.
  *
  * The wear-leveling is ensured by means of moving the contents of used
  * physical eraseblocks with low erase counter to free physical eraseblocks
@@ -43,34 +43,36 @@
  * The 'ubi_wl_get_peb()' function accepts data type hints which help to pick
  * an "optimal" physical eraseblock. For example, when it is known that the
  * physical eraseblock will be "put" soon because it contains short-term data,
- * the WL unit may pick a free physical eraseblock with low erase counter, and
- * so forth.
+ * the WL sub-system may pick a free physical eraseblock with low erase
+ * counter, and so forth.
  *
- * If the WL unit fails to erase a physical eraseblock, it marks it as bad.
+ * If the WL sub-system fails to erase a physical eraseblock, it marks it as
+ * bad.
  *
- * This unit is also responsible for scrubbing. If a bit-flip is detected in a
- * physical eraseblock, it has to be moved. Technically this is the same as
- * moving it for wear-leveling reasons.
+ * This sub-system is also responsible for scrubbing. If a bit-flip is detected
+ * in a physical eraseblock, it has to be moved. Technically this is the same
+ * as moving it for wear-leveling reasons.
  *
- * As it was said, for the UBI unit all physical eraseblocks are either "free"
- * or "used". Free eraseblock are kept in the @wl->free RB-tree, while used
- * eraseblocks are kept in a set of different RB-trees: @wl->used,
+ * As it was said, for the UBI sub-system all physical eraseblocks are either
+ * "free" or "used". Free eraseblock are kept in the @wl->free RB-tree, while
+ * used eraseblocks are kept in a set of different RB-trees: @wl->used,
  * @wl->prot.pnum, @wl->prot.aec, and @wl->scrub.
  *
  * Note, in this implementation, we keep a small in-RAM object for each physical
  * eraseblock. This is surely not a scalable solution. But it appears to be good
  * enough for moderately large flashes and it is simple. In future, one may
- * re-work this unit and make it more scalable.
+ * re-work this sub-system and make it more scalable.
  *
- * At the moment this unit does not utilize the sequence number, which was
- * introduced relatively recently. But it would be wise to do this because the
- * sequence number of a logical eraseblock characterizes how old is it. For
+ * At the moment this sub-system does not utilize the sequence number, which
+ * was introduced relatively recently. But it would be wise to do this because
+ * the sequence number of a logical eraseblock characterizes how old is it. For
  * example, when we move a PEB with low erase counter, and we need to pick the
  * target PEB, we pick a PEB with the highest EC if our PEB is "old" and we
  * pick target PEB with an average EC if our PEB is not very "old". This is a
- * room for future re-works of the WL unit.
+ * room for future re-works of the WL sub-system.
  *
- * FIXME: looks too complex, should be simplified (later).
+ * Note: the stuff with protection trees looks too complex and is difficult to
+ * understand. Should be fixed.
  */
 
 #include <linux/slab.h>
@@ -92,20 +94,21 @@
 
 /*
  * Maximum difference between two erase counters. If this threshold is
- * exceeded, the WL unit starts moving data from used physical eraseblocks with
- * low erase counter to free physical eraseblocks with high erase counter.
+ * exceeded, the WL sub-system starts moving data from used physical
+ * eraseblocks with low erase counter to free physical eraseblocks with high
+ * erase counter.
  */
 #define UBI_WL_THRESHOLD CONFIG_MTD_UBI_WL_THRESHOLD
 
 /*
- * When a physical eraseblock is moved, the WL unit has to pick the target
+ * When a physical eraseblock is moved, the WL sub-system has to pick the target
  * physical eraseblock to move to. The simplest way would be just to pick the
  * one with the highest erase counter. But in certain workloads this could lead
  * to an unlimited wear of one or few physical eraseblock. Indeed, imagine a
  * situation when the picked physical eraseblock is constantly erased after the
  * data is written to it. So, we have a constant which limits the highest erase
- * counter of the free physical eraseblock to pick. Namely, the WL unit does
- * not pick eraseblocks with erase counter greater then the lowest erase
+ * counter of the free physical eraseblock to pick. Namely, the WL sub-system
+ * does not pick eraseblocks with erase counter greater then the lowest erase
  * counter plus %WL_FREE_MAX_DIFF.
  */
 #define WL_FREE_MAX_DIFF (2*UBI_WL_THRESHOLD)
@@ -123,11 +126,11 @@
  * @abs_ec: the absolute erase counter value when the protection ends
  * @e: the wear-leveling entry of the physical eraseblock under protection
  *
- * When the WL unit returns a physical eraseblock, the physical eraseblock is
- * protected from being moved for some "time". For this reason, the physical
- * eraseblock is not directly moved from the @wl->free tree to the @wl->used
- * tree. There is one more tree in between where this physical eraseblock is
- * temporarily stored (@wl->prot).
+ * When the WL sub-system returns a physical eraseblock, the physical
+ * eraseblock is protected from being moved for some "time". For this reason,
+ * the physical eraseblock is not directly moved from the @wl->free tree to the
+ * @wl->used tree. There is one more tree in between where this physical
+ * eraseblock is temporarily stored (@wl->prot).
  *
  * All this protection stuff is needed because:
  *  o we don't want to move physical eraseblocks just after we have given them
@@ -175,7 +178,6 @@ struct ubi_wl_prot_entry {
  * @list: a link in the list of pending works
  * @func: worker function
  * @priv: private data of the worker function
- *
  * @e: physical eraseblock to erase
  * @torture: if the physical eraseblock has to be tortured
  *
@@ -1136,7 +1138,7 @@ out_ro:
 }
 
 /**
- * ubi_wl_put_peb - return a physical eraseblock to the wear-leveling unit.
+ * ubi_wl_put_peb - return a PEB to the wear-leveling sub-system.
  * @ubi: UBI device description object
  * @pnum: physical eraseblock to return
  * @torture: if this physical eraseblock has to be tortured
@@ -1175,11 +1177,11 @@ retry:
 		/*
 		 * User is putting the physical eraseblock which was selected
 		 * as the target the data is moved to. It may happen if the EBA
-		 * unit already re-mapped the LEB in 'ubi_eba_copy_leb()' but
-		 * the WL unit has not put the PEB to the "used" tree yet, but
-		 * it is about to do this. So we just set a flag which will
-		 * tell the WL worker that the PEB is not needed anymore and
-		 * should be scheduled for erasure.
+		 * sub-system already re-mapped the LEB in 'ubi_eba_copy_leb()'
+		 * but the WL sub-system has not put the PEB to the "used" tree
+		 * yet, but it is about to do this. So we just set a flag which
+		 * will tell the WL worker that the PEB is not needed anymore
+		 * and should be scheduled for erasure.
 		 */
 		dbg_wl("PEB %d is the target of data moving", pnum);
 		ubi_assert(!ubi->move_to_put);
@@ -1425,8 +1427,7 @@ static void cancel_pending(struct ubi_device *ubi)
 }
 
 /**
- * ubi_wl_init_scan - initialize the wear-leveling unit using scanning
- * information.
+ * ubi_wl_init_scan - initialize the WL sub-system using scanning information.
  * @ubi: UBI device description object
  * @si: scanning information
  *
@@ -1583,13 +1584,12 @@ static void protection_trees_destroy(struct ubi_device *ubi)
 }
 
 /**
- * ubi_wl_close - close the wear-leveling unit.
+ * ubi_wl_close - close the wear-leveling sub-system.
  * @ubi: UBI device description object
  */
 void ubi_wl_close(struct ubi_device *ubi)
 {
-	dbg_wl("close the UBI wear-leveling unit");
-
+	dbg_wl("close the WL sub-system");
 	cancel_pending(ubi);
 	protection_trees_destroy(ubi);
 	tree_destroy(&ubi->used);