Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (59 commits)
  mtd: mtdpart: disallow reading OOB past the end of the partition
  mtd: pxa3xx_nand: NULL dereference in pxa3xx_nand_probe
  UBI: use mtd->writebufsize to set minimal I/O unit size
  mtd: initialize writebufsize in the MTD object of a partition
  mtd: onenand: add mtd->writebufsize initialization
  mtd: nand: add mtd->writebufsize initialization
  mtd: cfi: add writebufsize initialization
  mtd: add writebufsize field to mtd_info struct
  mtd: OneNAND: OMAP2/3: prevent regulator sleeping while OneNAND is in use
  mtd: OneNAND: add enable / disable methods to onenand_chip
  mtd: m25p80: Fix JEDEC ID for AT26DF321
  mtd: txx9ndfmc: limit transfer bytes to 512 (ECC provides 6 bytes max)
  mtd: cfi_cmdset_0002: add support for Samsung K8D3x16UxC NOR chips
  mtd: cfi_cmdset_0002: add support for Samsung K8D6x16UxM NOR chips
  mtd: nand: ams-delta: drop omap_read/write, use ioremap
  mtd: m25p80: add debugging trace in sst_write
  mtd: nand: ams-delta: select for built-in by default
  mtd: OneNAND: lighten scary initial bad block messages
  mtd: OneNAND: OMAP2/3: add support for command line partitioning
  mtd: nand: rearrange ONFI revision checking, add ONFI 2.3
  ...

Fix up trivial conflict in drivers/mtd/Kconfig as per DavidW.

2 files changed, 29 insertions, 5 deletions

diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 5ebe280225d6..f49e49dc5928 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -672,7 +672,33 @@ static int io_init(struct ubi_device *ubi)
 		ubi->nor_flash = 1;
 	}
 
-	ubi->min_io_size = ubi->mtd->writesize;
+	/*
+	 * Set UBI min. I/O size (@ubi->min_io_size). We use @mtd->writebufsize
+	 * for these purposes, not @mtd->writesize. At the moment this does not
+	 * matter for NAND, because currently @mtd->writebufsize is equivalent to
+	 * @mtd->writesize for all NANDs. However, some CFI NOR flashes may
+	 * have @mtd->writebufsize which is multiple of @mtd->writesize.
+	 *
+	 * The reason we use @mtd->writebufsize for @ubi->min_io_size is that
+	 * UBI and UBIFS recovery algorithms rely on the fact that if there was
+	 * an unclean power cut, then we can find offset of the last corrupted
+	 * node, align the offset to @ubi->min_io_size, read the rest of the
+	 * eraseblock starting from this offset, and check whether there are
+	 * only 0xFF bytes. If yes, then we are probably dealing with a
+	 * corruption caused by a power cut, if not, then this is probably some
+	 * severe corruption.
+	 *
+	 * Thus, we have to use the maximum write unit size of the flash, which
+	 * is @mtd->writebufsize, because @mtd->writesize is the minimum write
+	 * size, not the maximum.
+	 */
+	if (ubi->mtd->type == MTD_NANDFLASH)
+		ubi_assert(ubi->mtd->writebufsize == ubi->mtd->writesize);
+	else if (ubi->mtd->type == MTD_NORFLASH)
+		ubi_assert(ubi->mtd->writebufsize % ubi->mtd->writesize == 0);
+
+	ubi->min_io_size = ubi->mtd->writebufsize;
+
 	ubi->hdrs_min_io_size = ubi->mtd->writesize >> ubi->mtd->subpage_sft;
 
 	/*
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index fcdb7f65fe0b..0b8141fc5c26 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -425,12 +425,11 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
 
 	/* Read both LEB 0 and LEB 1 into memory */
 	ubi_rb_for_each_entry(rb, seb, &sv->root, u.rb) {
-		leb[seb->lnum] = vmalloc(ubi->vtbl_size);
+		leb[seb->lnum] = vzalloc(ubi->vtbl_size);
 		if (!leb[seb->lnum]) {
 			err = -ENOMEM;
 			goto out_free;
 		}
-		memset(leb[seb->lnum], 0, ubi->vtbl_size);
 
 		err = ubi_io_read_data(ubi, leb[seb->lnum], seb->pnum, 0,
 				       ubi->vtbl_size);
@@ -516,10 +515,9 @@ static struct ubi_vtbl_record *create_empty_lvol(struct ubi_device *ubi,
 	int i;
 	struct ubi_vtbl_record *vtbl;
 
-	vtbl = vmalloc(ubi->vtbl_size);
+	vtbl = vzalloc(ubi->vtbl_size);
 	if (!vtbl)
 		return ERR_PTR(-ENOMEM);
-	memset(vtbl, 0, ubi->vtbl_size);
 
 	for (i = 0; i < ubi->vtbl_slots; i++)
 		memcpy(&vtbl[i], &empty_vtbl_record, UBI_VTBL_RECORD_SIZE);