3c*/acenic/typhoon: Move 3Com Ethernet drivers

Moves the 3Com drivers into drivers/net/ethernet/3com/ and the necessary
Kconfig and Makefile changes.

Did not move the following drivers becuase they use a non-3Com
chipset: 3c503, 3c505, 3c507, 3c523 and 3c527

CC: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
CC: David Dillow <dave@thedillows.org>
CC: Jes Sorensen <jes@trained-monkey.org>
CC: Alan Cox <alan@linux.intel.com>
CC: David Hinds <dahinds@users.sourceforge.net>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: David Dillow <dave@thedillows.org>

1 files changed, 0 insertions, 896 deletions

diff --git a/drivers/net/3c501.c b/drivers/net/3c501.c
deleted file mode 100644
index 5420f6de27df..000000000000
--- a/drivers/net/3c501.c
+++ /dev/null
@@ -1,896 +0,0 @@
-/* 3c501.c: A 3Com 3c501 Ethernet driver for Linux. */
-/*
-    Written 1992,1993,1994  Donald Becker
-
-    Copyright 1993 United States Government as represented by the
-    Director, National Security Agency.  This software may be used and
-    distributed according to the terms of the GNU General Public License,
-    incorporated herein by reference.
-
-    This is a device driver for the 3Com Etherlink 3c501.
-    Do not purchase this card, even as a joke.  It's performance is horrible,
-    and it breaks in many ways.
-
-    The original author may be reached as becker@scyld.com, or C/O
-	Scyld Computing Corporation
-	410 Severn Ave., Suite 210
-	Annapolis MD 21403
-
-    Fixed (again!) the missing interrupt locking on TX/RX shifting.
-	Alan Cox <alan@lxorguk.ukuu.org.uk>
-
-    Removed calls to init_etherdev since they are no longer needed, and
-    cleaned up modularization just a bit. The driver still allows only
-    the default address for cards when loaded as a module, but that's
-    really less braindead than anyone using a 3c501 board. :)
-		    19950208 (invid@msen.com)
-
-    Added traps for interrupts hitting the window as we clear and TX load
-    the board. Now getting 150K/second FTP with a 3c501 card. Still playing
-    with a TX-TX optimisation to see if we can touch 180-200K/second as seems
-    theoretically maximum.
-		19950402 Alan Cox <alan@lxorguk.ukuu.org.uk>
-
-    Cleaned up for 2.3.x because we broke SMP now.
-		20000208 Alan Cox <alan@lxorguk.ukuu.org.uk>
-
-    Check up pass for 2.5. Nothing significant changed
-		20021009 Alan Cox <alan@lxorguk.ukuu.org.uk>
-
-    Fixed zero fill corner case
-		20030104 Alan Cox <alan@lxorguk.ukuu.org.uk>
-
-
-   For the avoidance of doubt the "preferred form" of this code is one which
-   is in an open non patent encumbered format. Where cryptographic key signing
-   forms part of the process of creating an executable the information
-   including keys needed to generate an equivalently functional executable
-   are deemed to be part of the source code.
-
-*/
-
-
-/**
- * DOC: 3c501 Card Notes
- *
- *  Some notes on this thing if you have to hack it.  [Alan]
- *
- *  Some documentation is available from 3Com. Due to the boards age
- *  standard responses when you ask for this will range from 'be serious'
- *  to 'give it to a museum'. The documentation is incomplete and mostly
- *  of historical interest anyway.
- *
- *  The basic system is a single buffer which can be used to receive or
- *  transmit a packet. A third command mode exists when you are setting
- *  things up.
- *
- *  If it's transmitting it's not receiving and vice versa. In fact the
- *  time to get the board back into useful state after an operation is
- *  quite large.
- *
- *  The driver works by keeping the board in receive mode waiting for a
- *  packet to arrive. When one arrives it is copied out of the buffer
- *  and delivered to the kernel. The card is reloaded and off we go.
- *
- *  When transmitting lp->txing is set and the card is reset (from
- *  receive mode) [possibly losing a packet just received] to command
- *  mode. A packet is loaded and transmit mode triggered. The interrupt
- *  handler runs different code for transmit interrupts and can handle
- *  returning to receive mode or retransmissions (yes you have to help
- *  out with those too).
- *
- * DOC: Problems
- *
- *  There are a wide variety of undocumented error returns from the card
- *  and you basically have to kick the board and pray if they turn up. Most
- *  only occur under extreme load or if you do something the board doesn't
- *  like (eg touching a register at the wrong time).
- *
- *  The driver is less efficient than it could be. It switches through
- *  receive mode even if more transmits are queued. If this worries you buy
- *  a real Ethernet card.
- *
- *  The combination of slow receive restart and no real multicast
- *  filter makes the board unusable with a kernel compiled for IP
- *  multicasting in a real multicast environment. That's down to the board,
- *  but even with no multicast programs running a multicast IP kernel is
- *  in group 224.0.0.1 and you will therefore be listening to all multicasts.
- *  One nv conference running over that Ethernet and you can give up.
- *
- */
-
-#define DRV_NAME	"3c501"
-#define DRV_VERSION	"2002/10/09"
-
-
-static const char version[] =
-	DRV_NAME ".c: " DRV_VERSION " Alan Cox (alan@lxorguk.ukuu.org.uk).\n";
-
-/*
- *	Braindamage remaining:
- *	The 3c501 board.
- */
-
-#include <linux/module.h>
-
-#include <linux/kernel.h>
-#include <linux/fcntl.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/spinlock.h>
-#include <linux/ethtool.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/init.h>
-
-#include "3c501.h"
-
-/*
- *	The boilerplate probe code.
- */
-
-static int io = 0x280;
-static int irq = 5;
-static int mem_start;
-
-/**
- * el1_probe:		-	probe for a 3c501
- * @dev: The device structure passed in to probe.
- *
- * This can be called from two places. The network layer will probe using
- * a device structure passed in with the probe information completed. For a
- * modular driver we use #init_module to fill in our own structure and probe
- * for it.
- *
- * Returns 0 on success. ENXIO if asked not to probe and ENODEV if asked to
- * probe and failing to find anything.
- */
-
-struct net_device * __init el1_probe(int unit)
-{
-	struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
-	static const unsigned ports[] = { 0x280, 0x300, 0};
-	const unsigned *port;
-	int err = 0;
-
-	if (!dev)
-		return ERR_PTR(-ENOMEM);
-
-	if (unit >= 0) {
-		sprintf(dev->name, "eth%d", unit);
-		netdev_boot_setup_check(dev);
-		io = dev->base_addr;
-		irq = dev->irq;
-		mem_start = dev->mem_start & 7;
-	}
-
-	if (io > 0x1ff) {	/* Check a single specified location. */
-		err = el1_probe1(dev, io);
-	} else if (io != 0) {
-		err = -ENXIO;		/* Don't probe at all. */
-	} else {
-		for (port = ports; *port && el1_probe1(dev, *port); port++)
-			;
-		if (!*port)
-			err = -ENODEV;
-	}
-	if (err)
-		goto out;
-	err = register_netdev(dev);
-	if (err)
-		goto out1;
-	return dev;
-out1:
-	release_region(dev->base_addr, EL1_IO_EXTENT);
-out:
-	free_netdev(dev);
-	return ERR_PTR(err);
-}
-
-static const struct net_device_ops el_netdev_ops = {
-	.ndo_open		= el_open,
-	.ndo_stop		= el1_close,
-	.ndo_start_xmit 	= el_start_xmit,
-	.ndo_tx_timeout		= el_timeout,
-	.ndo_set_multicast_list = set_multicast_list,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_set_mac_address 	= eth_mac_addr,
-	.ndo_validate_addr	= eth_validate_addr,
-};
-
-/**
- *	el1_probe1:
- *	@dev: The device structure to use
- *	@ioaddr: An I/O address to probe at.
- *
- *	The actual probe. This is iterated over by #el1_probe in order to
- *	check all the applicable device locations.
- *
- *	Returns 0 for a success, in which case the device is activated,
- *	EAGAIN if the IRQ is in use by another driver, and ENODEV if the
- *	board cannot be found.
- */
-
-static int __init el1_probe1(struct net_device *dev, int ioaddr)
-{
-	struct net_local *lp;
-	const char *mname;		/* Vendor name */
-	unsigned char station_addr[6];
-	int autoirq = 0;
-	int i;
-
-	/*
-	 *	Reserve I/O resource for exclusive use by this driver
-	 */
-
-	if (!request_region(ioaddr, EL1_IO_EXTENT, DRV_NAME))
-		return -ENODEV;
-
-	/*
-	 *	Read the station address PROM data from the special port.
-	 */
-
-	for (i = 0; i < 6; i++) {
-		outw(i, ioaddr + EL1_DATAPTR);
-		station_addr[i] = inb(ioaddr + EL1_SAPROM);
-	}
-	/*
-	 *	Check the first three octets of the S.A. for 3Com's prefix, or
-	 *	for the Sager NP943 prefix.
-	 */
-
-	if (station_addr[0] == 0x02 && station_addr[1] == 0x60 &&
-	    station_addr[2] == 0x8c)
-		mname = "3c501";
-	else if (station_addr[0] == 0x00 && station_addr[1] == 0x80 &&
-		 station_addr[2] == 0xC8)
-		mname = "NP943";
-	else {
-		release_region(ioaddr, EL1_IO_EXTENT);
-		return -ENODEV;
-	}
-
-	/*
-	 *	We auto-IRQ by shutting off the interrupt line and letting it
-	 *	float high.
-	 */
-
-	dev->irq = irq;
-
-	if (dev->irq < 2) {
-		unsigned long irq_mask;
-
-		irq_mask = probe_irq_on();
-		inb(RX_STATUS);		/* Clear pending interrupts. */
-		inb(TX_STATUS);
-		outb(AX_LOOP + 1, AX_CMD);
-
-		outb(0x00, AX_CMD);
-
-		mdelay(20);
-		autoirq = probe_irq_off(irq_mask);
-
-		if (autoirq == 0) {
-			pr_warning("%s probe at %#x failed to detect IRQ line.\n",
-				mname, ioaddr);
-			release_region(ioaddr, EL1_IO_EXTENT);
-			return -EAGAIN;
-		}
-	}
-
-	outb(AX_RESET+AX_LOOP, AX_CMD);			/* Loopback mode. */
-	dev->base_addr = ioaddr;
-	memcpy(dev->dev_addr, station_addr, ETH_ALEN);
-
-	if (mem_start & 0xf)
-		el_debug = mem_start & 0x7;
-	if (autoirq)
-		dev->irq = autoirq;
-
-	pr_info("%s: %s EtherLink at %#lx, using %sIRQ %d.\n",
-			dev->name, mname, dev->base_addr,
-			autoirq ? "auto":"assigned ", dev->irq);
-
-#ifdef CONFIG_IP_MULTICAST
-	pr_warning("WARNING: Use of the 3c501 in a multicast kernel is NOT recommended.\n");
-#endif
-
-	if (el_debug)
-		pr_debug("%s", version);
-
-	lp = netdev_priv(dev);
-	memset(lp, 0, sizeof(struct net_local));
-	spin_lock_init(&lp->lock);
-
-	/*
-	 *	The EL1-specific entries in the device structure.
-	 */
-
-	dev->netdev_ops = &el_netdev_ops;
-	dev->watchdog_timeo = HZ;
-	dev->ethtool_ops = &netdev_ethtool_ops;
-	return 0;
-}
-
-/**
- *	el1_open:
- *	@dev: device that is being opened
- *
- *	When an ifconfig is issued which changes the device flags to include
- *	IFF_UP this function is called. It is only called when the change
- *	occurs, not when the interface remains up. #el1_close will be called
- *	when it goes down.
- *
- *	Returns 0 for a successful open, or -EAGAIN if someone has run off
- *	with our interrupt line.
- */
-
-static int el_open(struct net_device *dev)
-{
-	int retval;
-	int ioaddr = dev->base_addr;
-	struct net_local *lp = netdev_priv(dev);
-	unsigned long flags;
-
-	if (el_debug > 2)
-		pr_debug("%s: Doing el_open()...\n", dev->name);
-
-	retval = request_irq(dev->irq, el_interrupt, 0, dev->name, dev);
-	if (retval)
-		return retval;
-
-	spin_lock_irqsave(&lp->lock, flags);
-	el_reset(dev);
-	spin_unlock_irqrestore(&lp->lock, flags);
-
-	lp->txing = 0;		/* Board in RX mode */
-	outb(AX_RX, AX_CMD);	/* Aux control, irq and receive enabled */
-	netif_start_queue(dev);
-	return 0;
-}
-
-/**
- * el_timeout:
- * @dev: The 3c501 card that has timed out
- *
- * Attempt to restart the board. This is basically a mixture of extreme
- * violence and prayer
- *
- */
-
-static void el_timeout(struct net_device *dev)
-{
-	struct net_local *lp = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-
-	if (el_debug)
-		pr_debug("%s: transmit timed out, txsr %#2x axsr=%02x rxsr=%02x.\n",
-			dev->name, inb(TX_STATUS),
-			inb(AX_STATUS), inb(RX_STATUS));
-	dev->stats.tx_errors++;
-	outb(TX_NORM, TX_CMD);
-	outb(RX_NORM, RX_CMD);
-	outb(AX_OFF, AX_CMD);	/* Just trigger a false interrupt. */
-	outb(AX_RX, AX_CMD);	/* Aux control, irq and receive enabled */
-	lp->txing = 0;		/* Ripped back in to RX */
-	netif_wake_queue(dev);
-}
-
-
-/**
- * el_start_xmit:
- * @skb: The packet that is queued to be sent
- * @dev: The 3c501 card we want to throw it down
- *
- * Attempt to send a packet to a 3c501 card. There are some interesting
- * catches here because the 3c501 is an extremely old and therefore
- * stupid piece of technology.
- *
- * If we are handling an interrupt on the other CPU we cannot load a packet
- * as we may still be attempting to retrieve the last RX packet buffer.
- *
- * When a transmit times out we dump the card into control mode and just
- * start again. It happens enough that it isn't worth logging.
- *
- * We avoid holding the spin locks when doing the packet load to the board.
- * The device is very slow, and its DMA mode is even slower. If we held the
- * lock while loading 1500 bytes onto the controller we would drop a lot of
- * serial port characters. This requires we do extra locking, but we have
- * no real choice.
- */
-
-static netdev_tx_t el_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct net_local *lp = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-	unsigned long flags;
-
-	/*
-	 *	Avoid incoming interrupts between us flipping txing and flipping
-	 *	mode as the driver assumes txing is a faithful indicator of card
-	 *	state
-	 */
-
-	spin_lock_irqsave(&lp->lock, flags);
-
-	/*
-	 *	Avoid timer-based retransmission conflicts.
-	 */
-
-	netif_stop_queue(dev);
-
-	do {
-		int len = skb->len;
-		int pad = 0;
-		int gp_start;
-		unsigned char *buf = skb->data;
-
-		if (len < ETH_ZLEN)
-			pad = ETH_ZLEN - len;
-
-		gp_start = 0x800 - (len + pad);
-
-		lp->tx_pkt_start = gp_start;
-		lp->collisions = 0;
-
-		dev->stats.tx_bytes += skb->len;
-
-		/*
-		 *	Command mode with status cleared should [in theory]
-		 *	mean no more interrupts can be pending on the card.
-		 */
-
-		outb_p(AX_SYS, AX_CMD);
-		inb_p(RX_STATUS);
-		inb_p(TX_STATUS);
-
-		lp->loading = 1;
-		lp->txing = 1;
-
-		/*
-		 *	Turn interrupts back on while we spend a pleasant
-		 *	afternoon loading bytes into the board
-		 */
-
-		spin_unlock_irqrestore(&lp->lock, flags);
-
-		/* Set rx packet area to 0. */
-		outw(0x00, RX_BUF_CLR);
-		/* aim - packet will be loaded into buffer start */
-		outw(gp_start, GP_LOW);
-		/* load buffer (usual thing each byte increments the pointer) */
-		outsb(DATAPORT, buf, len);
-		if (pad) {
-			while (pad--)		/* Zero fill buffer tail */
-				outb(0, DATAPORT);
-		}
-		/* the board reuses the same register */
-		outw(gp_start, GP_LOW);
-
-		if (lp->loading != 2) {
-			/* fire ... Trigger xmit.  */
-			outb(AX_XMIT, AX_CMD);
-			lp->loading = 0;
-			if (el_debug > 2)
-				pr_debug(" queued xmit.\n");
-			dev_kfree_skb(skb);
-			return NETDEV_TX_OK;
-		}
-		/* A receive upset our load, despite our best efforts */
-		if (el_debug > 2)
-			pr_debug("%s: burped during tx load.\n", dev->name);
-		spin_lock_irqsave(&lp->lock, flags);
-	} while (1);
-}
-
-/**
- * el_interrupt:
- * @irq: Interrupt number
- * @dev_id: The 3c501 that burped
- *
- * Handle the ether interface interrupts. The 3c501 needs a lot more
- * hand holding than most cards. In particular we get a transmit interrupt
- * with a collision error because the board firmware isn't capable of rewinding
- * its own transmit buffer pointers. It can however count to 16 for us.
- *
- * On the receive side the card is also very dumb. It has no buffering to
- * speak of. We simply pull the packet out of its PIO buffer (which is slow)
- * and queue it for the kernel. Then we reset the card for the next packet.
- *
- * We sometimes get surprise interrupts late both because the SMP IRQ delivery
- * is message passing and because the card sometimes seems to deliver late. I
- * think if it is part way through a receive and the mode is changed it carries
- * on receiving and sends us an interrupt. We have to band aid all these cases
- * to get a sensible 150kBytes/second performance. Even then you want a small
- * TCP window.
- */
-
-static irqreturn_t el_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	struct net_local *lp;
-	int ioaddr;
-	int axsr;			/* Aux. status reg. */
-
-	ioaddr = dev->base_addr;
-	lp = netdev_priv(dev);
-
-	spin_lock(&lp->lock);
-
-	/*
-	 *	What happened ?
-	 */
-
-	axsr = inb(AX_STATUS);
-
-	/*
-	 *	Log it
-	 */
-
-	if (el_debug > 3)
-		pr_debug("%s: el_interrupt() aux=%#02x\n", dev->name, axsr);
-
-	if (lp->loading == 1 && !lp->txing)
-		pr_warning("%s: Inconsistent state loading while not in tx\n",
-			dev->name);
-
-	if (lp->txing) {
-		/*
-		 *	Board in transmit mode. May be loading. If we are
-		 *	loading we shouldn't have got this.
-		 */
-		int txsr = inb(TX_STATUS);
-
-		if (lp->loading == 1) {
-			if (el_debug > 2)
-				pr_debug("%s: Interrupt while loading [txsr=%02x gp=%04x rp=%04x]\n",
-					dev->name, txsr, inw(GP_LOW), inw(RX_LOW));
-
-			/* Force a reload */
-			lp->loading = 2;
-			spin_unlock(&lp->lock);
-			goto out;
-		}
-		if (el_debug > 6)
-			pr_debug("%s: txsr=%02x gp=%04x rp=%04x\n", dev->name,
-					txsr, inw(GP_LOW), inw(RX_LOW));
-
-		if ((axsr & 0x80) && (txsr & TX_READY) == 0) {
-			/*
-			 *	FIXME: is there a logic to whether to keep
-			 *	on trying or reset immediately ?
-			 */
-			if (el_debug > 1)
-				pr_debug("%s: Unusual interrupt during Tx, txsr=%02x axsr=%02x gp=%03x rp=%03x.\n",
-					dev->name, txsr, axsr,
-					inw(ioaddr + EL1_DATAPTR),
-					inw(ioaddr + EL1_RXPTR));
-			lp->txing = 0;
-			netif_wake_queue(dev);
-		} else if (txsr & TX_16COLLISIONS) {
-			/*
-			 *	Timed out
-			 */
-			if (el_debug)
-				pr_debug("%s: Transmit failed 16 times, Ethernet jammed?\n", dev->name);
-			outb(AX_SYS, AX_CMD);
-			lp->txing = 0;
-			dev->stats.tx_aborted_errors++;
-			netif_wake_queue(dev);
-		} else if (txsr & TX_COLLISION) {
-			/*
-			 *	Retrigger xmit.
-			 */
-
-			if (el_debug > 6)
-				pr_debug("%s: retransmitting after a collision.\n", dev->name);
-			/*
-			 *	Poor little chip can't reset its own start
-			 *	pointer
-			 */
-
-			outb(AX_SYS, AX_CMD);
-			outw(lp->tx_pkt_start, GP_LOW);
-			outb(AX_XMIT, AX_CMD);
-			dev->stats.collisions++;
-			spin_unlock(&lp->lock);
-			goto out;
-		} else {
-			/*
-			 *	It worked.. we will now fall through and receive
-			 */
-			dev->stats.tx_packets++;
-			if (el_debug > 6)
-				pr_debug("%s: Tx succeeded %s\n", dev->name,
-					(txsr & TX_RDY) ? "." : "but tx is busy!");
-			/*
-			 *	This is safe the interrupt is atomic WRT itself.
-			 */
-			lp->txing = 0;
-			/* In case more to transmit */
-			netif_wake_queue(dev);
-		}
-	} else {
-		/*
-		 *	In receive mode.
-		 */
-
-		int rxsr = inb(RX_STATUS);
-		if (el_debug > 5)
-			pr_debug("%s: rxsr=%02x txsr=%02x rp=%04x\n",
-				dev->name, rxsr, inb(TX_STATUS), inw(RX_LOW));
-		/*
-		 *	Just reading rx_status fixes most errors.
-		 */
-		if (rxsr & RX_MISSED)
-			dev->stats.rx_missed_errors++;
-		else if (rxsr & RX_RUNT) {
-			/* Handled to avoid board lock-up. */
-			dev->stats.rx_length_errors++;
-			if (el_debug > 5)
-				pr_debug("%s: runt.\n", dev->name);
-		} else if (rxsr & RX_GOOD) {
-			/*
-			 *	Receive worked.
-			 */
-			el_receive(dev);
-		} else {
-			/*
-			 *	Nothing?  Something is broken!
-			 */
-			if (el_debug > 2)
-				pr_debug("%s: No packet seen, rxsr=%02x **resetting 3c501***\n",
-					dev->name, rxsr);
-			el_reset(dev);
-		}
-	}
-
-	/*
-	 *	Move into receive mode
-	 */
-
-	outb(AX_RX, AX_CMD);
-	outw(0x00, RX_BUF_CLR);
-	inb(RX_STATUS);		/* Be certain that interrupts are cleared. */
-	inb(TX_STATUS);
-	spin_unlock(&lp->lock);
-out:
-	return IRQ_HANDLED;
-}
-
-
-/**
- * el_receive:
- * @dev: Device to pull the packets from
- *
- * We have a good packet. Well, not really "good", just mostly not broken.
- * We must check everything to see if it is good. In particular we occasionally
- * get wild packet sizes from the card. If the packet seems sane we PIO it
- * off the card and queue it for the protocol layers.
- */
-
-static void el_receive(struct net_device *dev)
-{
-	int ioaddr = dev->base_addr;
-	int pkt_len;
-	struct sk_buff *skb;
-
-	pkt_len = inw(RX_LOW);
-
-	if (el_debug > 4)
-		pr_debug(" el_receive %d.\n", pkt_len);
-
-	if (pkt_len < 60 || pkt_len > 1536) {
-		if (el_debug)
-			pr_debug("%s: bogus packet, length=%d\n",
-						dev->name, pkt_len);
-		dev->stats.rx_over_errors++;
-		return;
-	}
-
-	/*
-	 *	Command mode so we can empty the buffer
-	 */
-
-	outb(AX_SYS, AX_CMD);
-	skb = dev_alloc_skb(pkt_len+2);
-
-	/*
-	 *	Start of frame
-	 */
-
-	outw(0x00, GP_LOW);
-	if (skb == NULL) {
-		pr_info("%s: Memory squeeze, dropping packet.\n", dev->name);
-		dev->stats.rx_dropped++;
-		return;
-	} else {
-		skb_reserve(skb, 2);	/* Force 16 byte alignment */
-		/*
-		 *	The read increments through the bytes. The interrupt
-		 *	handler will fix the pointer when it returns to
-		 *	receive mode.
-		 */
-		insb(DATAPORT, skb_put(skb, pkt_len), pkt_len);
-		skb->protocol = eth_type_trans(skb, dev);
-		netif_rx(skb);
-		dev->stats.rx_packets++;
-		dev->stats.rx_bytes += pkt_len;
-	}
-}
-
-/**
- * el_reset: Reset a 3c501 card
- * @dev: The 3c501 card about to get zapped
- *
- * Even resetting a 3c501 isn't simple. When you activate reset it loses all
- * its configuration. You must hold the lock when doing this. The function
- * cannot take the lock itself as it is callable from the irq handler.
- */
-
-static void  el_reset(struct net_device *dev)
-{
-	struct net_local *lp = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-
-	if (el_debug > 2)
-		pr_info("3c501 reset...\n");
-	outb(AX_RESET, AX_CMD);		/* Reset the chip */
-	/* Aux control, irq and loopback enabled */
-	outb(AX_LOOP, AX_CMD);
-	{
-		int i;
-		for (i = 0; i < 6; i++)	/* Set the station address. */
-			outb(dev->dev_addr[i], ioaddr + i);
-	}
-
-	outw(0, RX_BUF_CLR);		/* Set rx packet area to 0. */
-	outb(TX_NORM, TX_CMD);		/* tx irq on done, collision */
-	outb(RX_NORM, RX_CMD);		/* Set Rx commands. */
-	inb(RX_STATUS);			/* Clear status. */
-	inb(TX_STATUS);
-	lp->txing = 0;
-}
-
-/**
- * el1_close:
- * @dev: 3c501 card to shut down
- *
- * Close a 3c501 card. The IFF_UP flag has been cleared by the user via
- * the SIOCSIFFLAGS ioctl. We stop any further transmissions being queued,
- * and then disable the interrupts. Finally we reset the chip. The effects
- * of the rest will be cleaned up by #el1_open. Always returns 0 indicating
- * a success.
- */
-
-static int el1_close(struct net_device *dev)
-{
-	int ioaddr = dev->base_addr;
-
-	if (el_debug > 2)
-		pr_info("%s: Shutting down Ethernet card at %#x.\n",
-						dev->name, ioaddr);
-
-	netif_stop_queue(dev);
-
-	/*
-	 *	Free and disable the IRQ.
-	 */
-
-	free_irq(dev->irq, dev);
-	outb(AX_RESET, AX_CMD);		/* Reset the chip */
-
-	return 0;
-}
-
-/**
- * set_multicast_list:
- * @dev: The device to adjust
- *
- * Set or clear the multicast filter for this adaptor to use the best-effort
- * filtering supported. The 3c501 supports only three modes of filtering.
- * It always receives broadcasts and packets for itself. You can choose to
- * optionally receive all packets, or all multicast packets on top of this.
- */
-
-static void set_multicast_list(struct net_device *dev)
-{
-	int ioaddr = dev->base_addr;
-
-	if (dev->flags & IFF_PROMISC) {
-		outb(RX_PROM, RX_CMD);
-		inb(RX_STATUS);
-	} else if (!netdev_mc_empty(dev) || dev->flags & IFF_ALLMULTI) {
-		/* Multicast or all multicast is the same */
-		outb(RX_MULT, RX_CMD);
-		inb(RX_STATUS);		/* Clear status. */
-	} else {
-		outb(RX_NORM, RX_CMD);
-		inb(RX_STATUS);
-	}
-}
-
-
-static void netdev_get_drvinfo(struct net_device *dev,
-			       struct ethtool_drvinfo *info)
-{
-	strcpy(info->driver, DRV_NAME);
-	strcpy(info->version, DRV_VERSION);
-	sprintf(info->bus_info, "ISA 0x%lx", dev->base_addr);
-}
-
-static u32 netdev_get_msglevel(struct net_device *dev)
-{
-	return debug;
-}
-
-static void netdev_set_msglevel(struct net_device *dev, u32 level)
-{
-	debug = level;
-}
-
-static const struct ethtool_ops netdev_ethtool_ops = {
-	.get_drvinfo		= netdev_get_drvinfo,
-	.get_msglevel		= netdev_get_msglevel,
-	.set_msglevel		= netdev_set_msglevel,
-};
-
-#ifdef MODULE
-
-static struct net_device *dev_3c501;
-
-module_param(io, int, 0);
-module_param(irq, int, 0);
-MODULE_PARM_DESC(io, "EtherLink I/O base address");
-MODULE_PARM_DESC(irq, "EtherLink IRQ number");
-
-/**
- * init_module:
- *
- * When the driver is loaded as a module this function is called. We fake up
- * a device structure with the base I/O and interrupt set as if it were being
- * called from Space.c. This minimises the extra code that would otherwise
- * be required.
- *
- * Returns 0 for success or -EIO if a card is not found. Returning an error
- * here also causes the module to be unloaded
- */
-
-int __init init_module(void)
-{
-	dev_3c501 = el1_probe(-1);
-	if (IS_ERR(dev_3c501))
-		return PTR_ERR(dev_3c501);
-	return 0;
-}
-
-/**
- * cleanup_module:
- *
- * The module is being unloaded. We unhook our network device from the system
- * and then free up the resources we took when the card was found.
- */
-
-void __exit cleanup_module(void)
-{
-	struct net_device *dev = dev_3c501;
-	unregister_netdev(dev);
-	release_region(dev->base_addr, EL1_IO_EXTENT);
-	free_netdev(dev);
-}
-
-#endif /* MODULE */
-
-MODULE_AUTHOR("Donald Becker, Alan Cox");
-MODULE_DESCRIPTION("Support for the ancient 3Com 3c501 ethernet card");
-MODULE_LICENSE("GPL");
-