3c*/acenic/typhoon: Move 3Com Ethernet drivers

Moves the 3Com drivers into drivers/net/ethernet/3com/ and the necessary
Kconfig and Makefile changes.

Did not move the following drivers becuase they use a non-3Com
chipset: 3c503, 3c505, 3c507, 3c523 and 3c527

CC: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
CC: David Dillow <dave@thedillows.org>
CC: Jes Sorensen <jes@trained-monkey.org>
CC: Alan Cox <alan@linux.intel.com>
CC: David Hinds <dahinds@users.sourceforge.net>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: David Dillow <dave@thedillows.org>

1 files changed, 0 insertions, 1584 deletions

diff --git a/drivers/net/3c515.c b/drivers/net/3c515.c
deleted file mode 100644
index d2bb4b254c57..000000000000
--- a/drivers/net/3c515.c
+++ /dev/null
@@ -1,1584 +0,0 @@
-/*
-	Written 1997-1998 by Donald Becker.
-
-	This software may be used and distributed according to the terms
-	of the GNU General Public License, incorporated herein by reference.
-
-	This driver is for the 3Com ISA EtherLink XL "Corkscrew" 3c515 ethercard.
-
-	The author may be reached as becker@scyld.com, or C/O
-	Scyld Computing Corporation
-	410 Severn Ave., Suite 210
-	Annapolis MD 21403
-
-
-	2000/2/2- Added support for kernel-level ISAPnP
-		by Stephen Frost <sfrost@snowman.net> and Alessandro Zummo
-	Cleaned up for 2.3.x/softnet by Jeff Garzik and Alan Cox.
-
-	2001/11/17 - Added ethtool support (jgarzik)
-
-	2002/10/28 - Locking updates for 2.5 (alan@lxorguk.ukuu.org.uk)
-
-*/
-
-#define DRV_NAME		"3c515"
-#define DRV_VERSION		"0.99t-ac"
-#define DRV_RELDATE		"28-Oct-2002"
-
-static char *version =
-DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " becker@scyld.com and others\n";
-
-#define CORKSCREW 1
-
-/* "Knobs" that adjust features and parameters. */
-/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
-   Setting to > 1512 effectively disables this feature. */
-static int rx_copybreak = 200;
-
-/* Allow setting MTU to a larger size, bypassing the normal ethernet setup. */
-static const int mtu = 1500;
-
-/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
-static int max_interrupt_work = 20;
-
-/* Enable the automatic media selection code -- usually set. */
-#define AUTOMEDIA 1
-
-/* Allow the use of fragment bus master transfers instead of only
-   programmed-I/O for Vortex cards.  Full-bus-master transfers are always
-   enabled by default on Boomerang cards.  If VORTEX_BUS_MASTER is defined,
-   the feature may be turned on using 'options'. */
-#define VORTEX_BUS_MASTER
-
-/* A few values that may be tweaked. */
-/* Keep the ring sizes a power of two for efficiency. */
-#define TX_RING_SIZE	16
-#define RX_RING_SIZE	16
-#define PKT_BUF_SZ		1536	/* Size of each temporary Rx buffer. */
-
-#include <linux/module.h>
-#include <linux/isapnp.h>
-#include <linux/kernel.h>
-#include <linux/netdevice.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/in.h>
-#include <linux/ioport.h>
-#include <linux/skbuff.h>
-#include <linux/etherdevice.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/ethtool.h>
-#include <linux/bitops.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-
-#define NEW_MULTICAST
-#include <linux/delay.h>
-
-#define MAX_UNITS 8
-
-MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
-MODULE_DESCRIPTION("3Com 3c515 Corkscrew driver");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
-
-/* "Knobs" for adjusting internal parameters. */
-/* Put out somewhat more debugging messages. (0 - no msg, 1 minimal msgs). */
-#define DRIVER_DEBUG 1
-/* Some values here only for performance evaluation and path-coverage
-   debugging. */
-static int rx_nocopy, rx_copy, queued_packet;
-
-/* Number of times to check to see if the Tx FIFO has space, used in some
-   limited cases. */
-#define WAIT_TX_AVAIL 200
-
-/* Operational parameter that usually are not changed. */
-#define TX_TIMEOUT  ((4*HZ)/10)	/* Time in jiffies before concluding Tx hung */
-
-/* The size here is somewhat misleading: the Corkscrew also uses the ISA
-   aliased registers at <base>+0x400.
-   */
-#define CORKSCREW_TOTAL_SIZE 0x20
-
-#ifdef DRIVER_DEBUG
-static int corkscrew_debug = DRIVER_DEBUG;
-#else
-static int corkscrew_debug = 1;
-#endif
-
-#define CORKSCREW_ID 10
-
-/*
-				Theory of Operation
-
-I. Board Compatibility
-
-This device driver is designed for the 3Com 3c515 ISA Fast EtherLink XL,
-3Com's ISA bus adapter for Fast Ethernet.  Due to the unique I/O port layout,
-it's not practical to integrate this driver with the other EtherLink drivers.
-
-II. Board-specific settings
-
-The Corkscrew has an EEPROM for configuration, but no special settings are
-needed for Linux.
-
-III. Driver operation
-
-The 3c515 series use an interface that's very similar to the 3c900 "Boomerang"
-PCI cards, with the bus master interface extensively modified to work with
-the ISA bus.
-
-The card is capable of full-bus-master transfers with separate
-lists of transmit and receive descriptors, similar to the AMD LANCE/PCnet,
-DEC Tulip and Intel Speedo3.
-
-This driver uses a "RX_COPYBREAK" scheme rather than a fixed intermediate
-receive buffer.  This scheme allocates full-sized skbuffs as receive
-buffers.  The value RX_COPYBREAK is used as the copying breakpoint: it is
-chosen to trade-off the memory wasted by passing the full-sized skbuff to
-the queue layer for all frames vs. the copying cost of copying a frame to a
-correctly-sized skbuff.
-
-
-IIIC. Synchronization
-The driver runs as two independent, single-threaded flows of control.  One
-is the send-packet routine, which enforces single-threaded use by the netif
-layer.  The other thread is the interrupt handler, which is single
-threaded by the hardware and other software.
-
-IV. Notes
-
-Thanks to Terry Murphy of 3Com for providing documentation and a development
-board.
-
-The names "Vortex", "Boomerang" and "Corkscrew" are the internal 3Com
-project names.  I use these names to eliminate confusion -- 3Com product
-numbers and names are very similar and often confused.
-
-The new chips support both ethernet (1.5K) and FDDI (4.5K) frame sizes!
-This driver only supports ethernet frames because of the recent MTU limit
-of 1.5K, but the changes to support 4.5K are minimal.
-*/
-
-/* Operational definitions.
-   These are not used by other compilation units and thus are not
-   exported in a ".h" file.
-
-   First the windows.  There are eight register windows, with the command
-   and status registers available in each.
-   */
-#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD)
-#define EL3_CMD 0x0e
-#define EL3_STATUS 0x0e
-
-/* The top five bits written to EL3_CMD are a command, the lower
-   11 bits are the parameter, if applicable.
-   Note that 11 parameters bits was fine for ethernet, but the new chips
-   can handle FDDI length frames (~4500 octets) and now parameters count
-   32-bit 'Dwords' rather than octets. */
-
-enum corkscrew_cmd {
-	TotalReset = 0 << 11, SelectWindow = 1 << 11, StartCoax = 2 << 11,
-	RxDisable = 3 << 11, RxEnable = 4 << 11, RxReset = 5 << 11,
-	UpStall = 6 << 11, UpUnstall = (6 << 11) + 1, DownStall = (6 << 11) + 2,
-	DownUnstall = (6 << 11) + 3, RxDiscard = 8 << 11, TxEnable = 9 << 11,
-	TxDisable = 10 << 11, TxReset = 11 << 11, FakeIntr = 12 << 11,
-	AckIntr = 13 << 11, SetIntrEnb = 14 << 11, SetStatusEnb = 15 << 11,
-	SetRxFilter = 16 << 11, SetRxThreshold = 17 << 11,
-	SetTxThreshold = 18 << 11, SetTxStart = 19 << 11, StartDMAUp = 20 << 11,
-	StartDMADown = (20 << 11) + 1, StatsEnable = 21 << 11,
-	StatsDisable = 22 << 11, StopCoax = 23 << 11,
-};
-
-/* The SetRxFilter command accepts the following classes: */
-enum RxFilter {
-	RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8
-};
-
-/* Bits in the general status register. */
-enum corkscrew_status {
-	IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004,
-	TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020,
-	IntReq = 0x0040, StatsFull = 0x0080,
-	DMADone = 1 << 8, DownComplete = 1 << 9, UpComplete = 1 << 10,
-	DMAInProgress = 1 << 11,	/* DMA controller is still busy. */
-	CmdInProgress = 1 << 12,	/* EL3_CMD is still busy. */
-};
-
-/* Register window 1 offsets, the window used in normal operation.
-   On the Corkscrew this window is always mapped at offsets 0x10-0x1f. */
-enum Window1 {
-	TX_FIFO = 0x10, RX_FIFO = 0x10, RxErrors = 0x14,
-	RxStatus = 0x18, Timer = 0x1A, TxStatus = 0x1B,
-	TxFree = 0x1C,		/* Remaining free bytes in Tx buffer. */
-};
-enum Window0 {
-	Wn0IRQ = 0x08,
-#if defined(CORKSCREW)
-	Wn0EepromCmd = 0x200A,	/* Corkscrew EEPROM command register. */
-	Wn0EepromData = 0x200C,	/* Corkscrew EEPROM results register. */
-#else
-	Wn0EepromCmd = 10,	/* Window 0: EEPROM command register. */
-	Wn0EepromData = 12,	/* Window 0: EEPROM results register. */
-#endif
-};
-enum Win0_EEPROM_bits {
-	EEPROM_Read = 0x80, EEPROM_WRITE = 0x40, EEPROM_ERASE = 0xC0,
-	EEPROM_EWENB = 0x30,	/* Enable erasing/writing for 10 msec. */
-	EEPROM_EWDIS = 0x00,	/* Disable EWENB before 10 msec timeout. */
-};
-
-/* EEPROM locations. */
-enum eeprom_offset {
-	PhysAddr01 = 0, PhysAddr23 = 1, PhysAddr45 = 2, ModelID = 3,
-	EtherLink3ID = 7,
-};
-
-enum Window3 {			/* Window 3: MAC/config bits. */
-	Wn3_Config = 0, Wn3_MAC_Ctrl = 6, Wn3_Options = 8,
-};
-enum wn3_config {
-	Ram_size = 7,
-	Ram_width = 8,
-	Ram_speed = 0x30,
-	Rom_size = 0xc0,
-	Ram_split_shift = 16,
-	Ram_split = 3 << Ram_split_shift,
-	Xcvr_shift = 20,
-	Xcvr = 7 << Xcvr_shift,
-	Autoselect = 0x1000000,
-};
-
-enum Window4 {
-	Wn4_NetDiag = 6, Wn4_Media = 10,	/* Window 4: Xcvr/media bits. */
-};
-enum Win4_Media_bits {
-	Media_SQE = 0x0008,	/* Enable SQE error counting for AUI. */
-	Media_10TP = 0x00C0,	/* Enable link beat and jabber for 10baseT. */
-	Media_Lnk = 0x0080,	/* Enable just link beat for 100TX/100FX. */
-	Media_LnkBeat = 0x0800,
-};
-enum Window7 {			/* Window 7: Bus Master control. */
-	Wn7_MasterAddr = 0, Wn7_MasterLen = 6, Wn7_MasterStatus = 12,
-};
-
-/* Boomerang-style bus master control registers.  Note ISA aliases! */
-enum MasterCtrl {
-	PktStatus = 0x400, DownListPtr = 0x404, FragAddr = 0x408, FragLen =
-	    0x40c,
-	TxFreeThreshold = 0x40f, UpPktStatus = 0x410, UpListPtr = 0x418,
-};
-
-/* The Rx and Tx descriptor lists.
-   Caution Alpha hackers: these types are 32 bits!  Note also the 8 byte
-   alignment contraint on tx_ring[] and rx_ring[]. */
-struct boom_rx_desc {
-	u32 next;
-	s32 status;
-	u32 addr;
-	s32 length;
-};
-
-/* Values for the Rx status entry. */
-enum rx_desc_status {
-	RxDComplete = 0x00008000, RxDError = 0x4000,
-	/* See boomerang_rx() for actual error bits */
-};
-
-struct boom_tx_desc {
-	u32 next;
-	s32 status;
-	u32 addr;
-	s32 length;
-};
-
-struct corkscrew_private {
-	const char *product_name;
-	struct list_head list;
-	struct net_device *our_dev;
-	/* The Rx and Tx rings are here to keep them quad-word-aligned. */
-	struct boom_rx_desc rx_ring[RX_RING_SIZE];
-	struct boom_tx_desc tx_ring[TX_RING_SIZE];
-	/* The addresses of transmit- and receive-in-place skbuffs. */
-	struct sk_buff *rx_skbuff[RX_RING_SIZE];
-	struct sk_buff *tx_skbuff[TX_RING_SIZE];
-	unsigned int cur_rx, cur_tx;	/* The next free ring entry */
-	unsigned int dirty_rx, dirty_tx;/* The ring entries to be free()ed. */
-	struct sk_buff *tx_skb;	/* Packet being eaten by bus master ctrl.  */
-	struct timer_list timer;	/* Media selection timer. */
-	int capabilities	;	/* Adapter capabilities word. */
-	int options;			/* User-settable misc. driver options. */
-	int last_rx_packets;		/* For media autoselection. */
-	unsigned int available_media:8,	/* From Wn3_Options */
-		media_override:3,	/* Passed-in media type. */
-		default_media:3,	/* Read from the EEPROM. */
-		full_duplex:1, autoselect:1, bus_master:1,	/* Vortex can only do a fragment bus-m. */
-		full_bus_master_tx:1, full_bus_master_rx:1,	/* Boomerang  */
-		tx_full:1;
-	spinlock_t lock;
-	struct device *dev;
-};
-
-/* The action to take with a media selection timer tick.
-   Note that we deviate from the 3Com order by checking 10base2 before AUI.
- */
-enum xcvr_types {
-	XCVR_10baseT = 0, XCVR_AUI, XCVR_10baseTOnly, XCVR_10base2, XCVR_100baseTx,
-	XCVR_100baseFx, XCVR_MII = 6, XCVR_Default = 8,
-};
-
-static struct media_table {
-	char *name;
-	unsigned int media_bits:16,	/* Bits to set in Wn4_Media register. */
-		mask:8,			/* The transceiver-present bit in Wn3_Config. */
-		next:8;			/* The media type to try next. */
-	short wait;			/* Time before we check media status. */
-} media_tbl[] = {
-	{ "10baseT", Media_10TP, 0x08, XCVR_10base2, (14 * HZ) / 10 },
-	{ "10Mbs AUI", Media_SQE, 0x20, XCVR_Default, (1 * HZ) / 10},
-	{ "undefined", 0, 0x80, XCVR_10baseT, 10000},
-	{ "10base2", 0, 0x10, XCVR_AUI, (1 * HZ) / 10},
-	{ "100baseTX", Media_Lnk, 0x02, XCVR_100baseFx, (14 * HZ) / 10},
-	{ "100baseFX", Media_Lnk, 0x04, XCVR_MII, (14 * HZ) / 10},
-	{ "MII", 0, 0x40, XCVR_10baseT, 3 * HZ},
-	{ "undefined", 0, 0x01, XCVR_10baseT, 10000},
-	{ "Default", 0, 0xFF, XCVR_10baseT, 10000},
-};
-
-#ifdef __ISAPNP__
-static struct isapnp_device_id corkscrew_isapnp_adapters[] = {
-	{	ISAPNP_ANY_ID, ISAPNP_ANY_ID,
-		ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5051),
-		(long) "3Com Fast EtherLink ISA" },
-	{ }	/* terminate list */
-};
-
-MODULE_DEVICE_TABLE(isapnp, corkscrew_isapnp_adapters);
-
-static int nopnp;
-#endif /* __ISAPNP__ */
-
-static struct net_device *corkscrew_scan(int unit);
-static int corkscrew_setup(struct net_device *dev, int ioaddr,
-			    struct pnp_dev *idev, int card_number);
-static int corkscrew_open(struct net_device *dev);
-static void corkscrew_timer(unsigned long arg);
-static netdev_tx_t corkscrew_start_xmit(struct sk_buff *skb,
-					struct net_device *dev);
-static int corkscrew_rx(struct net_device *dev);
-static void corkscrew_timeout(struct net_device *dev);
-static int boomerang_rx(struct net_device *dev);
-static irqreturn_t corkscrew_interrupt(int irq, void *dev_id);
-static int corkscrew_close(struct net_device *dev);
-static void update_stats(int addr, struct net_device *dev);
-static struct net_device_stats *corkscrew_get_stats(struct net_device *dev);
-static void set_rx_mode(struct net_device *dev);
-static const struct ethtool_ops netdev_ethtool_ops;
-
-
-/*
-   Unfortunately maximizing the shared code between the integrated and
-   module version of the driver results in a complicated set of initialization
-   procedures.
-   init_module() -- modules /  tc59x_init()  -- built-in
-		The wrappers for corkscrew_scan()
-   corkscrew_scan()  		 The common routine that scans for PCI and EISA cards
-   corkscrew_found_device() Allocate a device structure when we find a card.
-					Different versions exist for modules and built-in.
-   corkscrew_probe1()		Fill in the device structure -- this is separated
-					so that the modules code can put it in dev->init.
-*/
-/* This driver uses 'options' to pass the media type, full-duplex flag, etc. */
-/* Note: this is the only limit on the number of cards supported!! */
-static int options[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1, };
-
-#ifdef MODULE
-static int debug = -1;
-
-module_param(debug, int, 0);
-module_param_array(options, int, NULL, 0);
-module_param(rx_copybreak, int, 0);
-module_param(max_interrupt_work, int, 0);
-MODULE_PARM_DESC(debug, "3c515 debug level (0-6)");
-MODULE_PARM_DESC(options, "3c515: Bits 0-2: media type, bit 3: full duplex, bit 4: bus mastering");
-MODULE_PARM_DESC(rx_copybreak, "3c515 copy breakpoint for copy-only-tiny-frames");
-MODULE_PARM_DESC(max_interrupt_work, "3c515 maximum events handled per interrupt");
-
-/* A list of all installed Vortex devices, for removing the driver module. */
-/* we will need locking (and refcounting) if we ever use it for more */
-static LIST_HEAD(root_corkscrew_dev);
-
-int init_module(void)
-{
-	int found = 0;
-	if (debug >= 0)
-		corkscrew_debug = debug;
-	if (corkscrew_debug)
-		pr_debug("%s", version);
-	while (corkscrew_scan(-1))
-		found++;
-	return found ? 0 : -ENODEV;
-}
-
-#else
-struct net_device *tc515_probe(int unit)
-{
-	struct net_device *dev = corkscrew_scan(unit);
-	static int printed;
-
-	if (!dev)
-		return ERR_PTR(-ENODEV);
-
-	if (corkscrew_debug > 0 && !printed) {
-		printed = 1;
-		pr_debug("%s", version);
-	}
-
-	return dev;
-}
-#endif				/* not MODULE */
-
-static int check_device(unsigned ioaddr)
-{
-	int timer;
-
-	if (!request_region(ioaddr, CORKSCREW_TOTAL_SIZE, "3c515"))
-		return 0;
-	/* Check the resource configuration for a matching ioaddr. */
-	if ((inw(ioaddr + 0x2002) & 0x1f0) != (ioaddr & 0x1f0)) {
-		release_region(ioaddr, CORKSCREW_TOTAL_SIZE);
-		return 0;
-	}
-	/* Verify by reading the device ID from the EEPROM. */
-	outw(EEPROM_Read + 7, ioaddr + Wn0EepromCmd);
-	/* Pause for at least 162 us. for the read to take place. */
-	for (timer = 4; timer >= 0; timer--) {
-		udelay(162);
-		if ((inw(ioaddr + Wn0EepromCmd) & 0x0200) == 0)
-			break;
-	}
-	if (inw(ioaddr + Wn0EepromData) != 0x6d50) {
-		release_region(ioaddr, CORKSCREW_TOTAL_SIZE);
-		return 0;
-	}
-	return 1;
-}
-
-static void cleanup_card(struct net_device *dev)
-{
-	struct corkscrew_private *vp = netdev_priv(dev);
-	list_del_init(&vp->list);
-	if (dev->dma)
-		free_dma(dev->dma);
-	outw(TotalReset, dev->base_addr + EL3_CMD);
-	release_region(dev->base_addr, CORKSCREW_TOTAL_SIZE);
-	if (vp->dev)
-		pnp_device_detach(to_pnp_dev(vp->dev));
-}
-
-static struct net_device *corkscrew_scan(int unit)
-{
-	struct net_device *dev;
-	static int cards_found = 0;
-	static int ioaddr;
-	int err;
-#ifdef __ISAPNP__
-	short i;
-	static int pnp_cards;
-#endif
-
-	dev = alloc_etherdev(sizeof(struct corkscrew_private));
-	if (!dev)
-		return ERR_PTR(-ENOMEM);
-
-	if (unit >= 0) {
-		sprintf(dev->name, "eth%d", unit);
-		netdev_boot_setup_check(dev);
-	}
-
-#ifdef __ISAPNP__
-	if(nopnp == 1)
-		goto no_pnp;
-	for(i=0; corkscrew_isapnp_adapters[i].vendor != 0; i++) {
-		struct pnp_dev *idev = NULL;
-		int irq;
-		while((idev = pnp_find_dev(NULL,
-					   corkscrew_isapnp_adapters[i].vendor,
-					   corkscrew_isapnp_adapters[i].function,
-					   idev))) {
-
-			if (pnp_device_attach(idev) < 0)
-				continue;
-			if (pnp_activate_dev(idev) < 0) {
-				pr_warning("pnp activate failed (out of resources?)\n");
-				pnp_device_detach(idev);
-				continue;
-			}
-			if (!pnp_port_valid(idev, 0) || !pnp_irq_valid(idev, 0)) {
-				pnp_device_detach(idev);
-				continue;
-			}
-			ioaddr = pnp_port_start(idev, 0);
-			irq = pnp_irq(idev, 0);
-			if (!check_device(ioaddr)) {
-				pnp_device_detach(idev);
-				continue;
-			}
-			if(corkscrew_debug)
-				pr_debug("ISAPNP reports %s at i/o 0x%x, irq %d\n",
-					(char*) corkscrew_isapnp_adapters[i].driver_data, ioaddr, irq);
-			pr_info("3c515 Resource configuration register %#4.4x, DCR %4.4x.\n",
-		     		inl(ioaddr + 0x2002), inw(ioaddr + 0x2000));
-			/* irq = inw(ioaddr + 0x2002) & 15; */ /* Use the irq from isapnp */
-			SET_NETDEV_DEV(dev, &idev->dev);
-			pnp_cards++;
-			err = corkscrew_setup(dev, ioaddr, idev, cards_found++);
-			if (!err)
-				return dev;
-			cleanup_card(dev);
-		}
-	}
-no_pnp:
-#endif /* __ISAPNP__ */
-
-	/* Check all locations on the ISA bus -- evil! */
-	for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x20) {
-		if (!check_device(ioaddr))
-			continue;
-
-		pr_info("3c515 Resource configuration register %#4.4x, DCR %4.4x.\n",
-		     inl(ioaddr + 0x2002), inw(ioaddr + 0x2000));
-		err = corkscrew_setup(dev, ioaddr, NULL, cards_found++);
-		if (!err)
-			return dev;
-		cleanup_card(dev);
-	}
-	free_netdev(dev);
-	return NULL;
-}
-
-
-static const struct net_device_ops netdev_ops = {
-	.ndo_open		= corkscrew_open,
-	.ndo_stop		= corkscrew_close,
-	.ndo_start_xmit		= corkscrew_start_xmit,
-	.ndo_tx_timeout		= corkscrew_timeout,
-	.ndo_get_stats		= corkscrew_get_stats,
-	.ndo_set_multicast_list = set_rx_mode,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_set_mac_address 	= eth_mac_addr,
-	.ndo_validate_addr	= eth_validate_addr,
-};
-
-
-static int corkscrew_setup(struct net_device *dev, int ioaddr,
-			    struct pnp_dev *idev, int card_number)
-{
-	struct corkscrew_private *vp = netdev_priv(dev);
-	unsigned int eeprom[0x40], checksum = 0;	/* EEPROM contents */
-	int i;
-	int irq;
-
-#ifdef __ISAPNP__
-	if (idev) {
-		irq = pnp_irq(idev, 0);
-		vp->dev = &idev->dev;
-	} else {
-		irq = inw(ioaddr + 0x2002) & 15;
-	}
-#else
-	irq = inw(ioaddr + 0x2002) & 15;
-#endif
-
-	dev->base_addr = ioaddr;
-	dev->irq = irq;
-	dev->dma = inw(ioaddr + 0x2000) & 7;
-	vp->product_name = "3c515";
-	vp->options = dev->mem_start;
-	vp->our_dev = dev;
-
-	if (!vp->options) {
-		 if (card_number >= MAX_UNITS)
-			vp->options = -1;
-		else
-			vp->options = options[card_number];
-	}
-
-	if (vp->options >= 0) {
-		vp->media_override = vp->options & 7;
-		if (vp->media_override == 2)
-			vp->media_override = 0;
-		vp->full_duplex = (vp->options & 8) ? 1 : 0;
-		vp->bus_master = (vp->options & 16) ? 1 : 0;
-	} else {
-		vp->media_override = 7;
-		vp->full_duplex = 0;
-		vp->bus_master = 0;
-	}
-#ifdef MODULE
-	list_add(&vp->list, &root_corkscrew_dev);
-#endif
-
-	pr_info("%s: 3Com %s at %#3x,", dev->name, vp->product_name, ioaddr);
-
-	spin_lock_init(&vp->lock);
-
-	/* Read the station address from the EEPROM. */
-	EL3WINDOW(0);
-	for (i = 0; i < 0x18; i++) {
-		__be16 *phys_addr = (__be16 *) dev->dev_addr;
-		int timer;
-		outw(EEPROM_Read + i, ioaddr + Wn0EepromCmd);
-		/* Pause for at least 162 us. for the read to take place. */
-		for (timer = 4; timer >= 0; timer--) {
-			udelay(162);
-			if ((inw(ioaddr + Wn0EepromCmd) & 0x0200) == 0)
-				break;
-		}
-		eeprom[i] = inw(ioaddr + Wn0EepromData);
-		checksum ^= eeprom[i];
-		if (i < 3)
-			phys_addr[i] = htons(eeprom[i]);
-	}
-	checksum = (checksum ^ (checksum >> 8)) & 0xff;
-	if (checksum != 0x00)
-		pr_cont(" ***INVALID CHECKSUM %4.4x*** ", checksum);
-	pr_cont(" %pM", dev->dev_addr);
-	if (eeprom[16] == 0x11c7) {	/* Corkscrew */
-		if (request_dma(dev->dma, "3c515")) {
-			pr_cont(", DMA %d allocation failed", dev->dma);
-			dev->dma = 0;
-		} else
-			pr_cont(", DMA %d", dev->dma);
-	}
-	pr_cont(", IRQ %d\n", dev->irq);
-	/* Tell them about an invalid IRQ. */
-	if (corkscrew_debug && (dev->irq <= 0 || dev->irq > 15))
-		pr_warning(" *** Warning: this IRQ is unlikely to work! ***\n");
-
-	{
-		static const char * const ram_split[] = {
-			"5:3", "3:1", "1:1", "3:5"
-		};
-		__u32 config;
-		EL3WINDOW(3);
-		vp->available_media = inw(ioaddr + Wn3_Options);
-		config = inl(ioaddr + Wn3_Config);
-		if (corkscrew_debug > 1)
-			pr_info("  Internal config register is %4.4x, transceivers %#x.\n",
-				config, inw(ioaddr + Wn3_Options));
-		pr_info("  %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
-			8 << config & Ram_size,
-			config & Ram_width ? "word" : "byte",
-			ram_split[(config & Ram_split) >> Ram_split_shift],
-			config & Autoselect ? "autoselect/" : "",
-			media_tbl[(config & Xcvr) >> Xcvr_shift].name);
-		vp->default_media = (config & Xcvr) >> Xcvr_shift;
-		vp->autoselect = config & Autoselect ? 1 : 0;
-		dev->if_port = vp->default_media;
-	}
-	if (vp->media_override != 7) {
-		pr_info("  Media override to transceiver type %d (%s).\n",
-		       vp->media_override,
-		       media_tbl[vp->media_override].name);
-		dev->if_port = vp->media_override;
-	}
-
-	vp->capabilities = eeprom[16];
-	vp->full_bus_master_tx = (vp->capabilities & 0x20) ? 1 : 0;
-	/* Rx is broken at 10mbps, so we always disable it. */
-	/* vp->full_bus_master_rx = 0; */
-	vp->full_bus_master_rx = (vp->capabilities & 0x20) ? 1 : 0;
-
-	/* The 3c51x-specific entries in the device structure. */
-	dev->netdev_ops = &netdev_ops;
-	dev->watchdog_timeo = (400 * HZ) / 1000;
-	dev->ethtool_ops = &netdev_ethtool_ops;
-
-	return register_netdev(dev);
-}
-
-
-static int corkscrew_open(struct net_device *dev)
-{
-	int ioaddr = dev->base_addr;
-	struct corkscrew_private *vp = netdev_priv(dev);
-	__u32 config;
-	int i;
-
-	/* Before initializing select the active media port. */
-	EL3WINDOW(3);
-	if (vp->full_duplex)
-		outb(0x20, ioaddr + Wn3_MAC_Ctrl);	/* Set the full-duplex bit. */
-	config = inl(ioaddr + Wn3_Config);
-
-	if (vp->media_override != 7) {
-		if (corkscrew_debug > 1)
-			pr_info("%s: Media override to transceiver %d (%s).\n",
-				dev->name, vp->media_override,
-				media_tbl[vp->media_override].name);
-		dev->if_port = vp->media_override;
-	} else if (vp->autoselect) {
-		/* Find first available media type, starting with 100baseTx. */
-		dev->if_port = 4;
-		while (!(vp->available_media & media_tbl[dev->if_port].mask))
-			dev->if_port = media_tbl[dev->if_port].next;
-
-		if (corkscrew_debug > 1)
-			pr_debug("%s: Initial media type %s.\n",
-			       dev->name, media_tbl[dev->if_port].name);
-
-		init_timer(&vp->timer);
-		vp->timer.expires = jiffies + media_tbl[dev->if_port].wait;
-		vp->timer.data = (unsigned long) dev;
-		vp->timer.function = corkscrew_timer;	/* timer handler */
-		add_timer(&vp->timer);
-	} else
-		dev->if_port = vp->default_media;
-
-	config = (config & ~Xcvr) | (dev->if_port << Xcvr_shift);
-	outl(config, ioaddr + Wn3_Config);
-
-	if (corkscrew_debug > 1) {
-		pr_debug("%s: corkscrew_open() InternalConfig %8.8x.\n",
-		       dev->name, config);
-	}
-
-	outw(TxReset, ioaddr + EL3_CMD);
-	for (i = 20; i >= 0; i--)
-		if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress))
-			break;
-
-	outw(RxReset, ioaddr + EL3_CMD);
-	/* Wait a few ticks for the RxReset command to complete. */
-	for (i = 20; i >= 0; i--)
-		if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress))
-			break;
-
-	outw(SetStatusEnb | 0x00, ioaddr + EL3_CMD);
-
-	/* Use the now-standard shared IRQ implementation. */
-	if (vp->capabilities == 0x11c7) {
-		/* Corkscrew: Cannot share ISA resources. */
-		if (dev->irq == 0 ||
-		    dev->dma == 0 ||
-		    request_irq(dev->irq, corkscrew_interrupt, 0,
-				vp->product_name, dev))
-			return -EAGAIN;
-		enable_dma(dev->dma);
-		set_dma_mode(dev->dma, DMA_MODE_CASCADE);
-	} else if (request_irq(dev->irq, corkscrew_interrupt, IRQF_SHARED,
-			       vp->product_name, dev)) {
-		return -EAGAIN;
-	}
-
-	if (corkscrew_debug > 1) {
-		EL3WINDOW(4);
-		pr_debug("%s: corkscrew_open() irq %d media status %4.4x.\n",
-		       dev->name, dev->irq, inw(ioaddr + Wn4_Media));
-	}
-
-	/* Set the station address and mask in window 2 each time opened. */
-	EL3WINDOW(2);
-	for (i = 0; i < 6; i++)
-		outb(dev->dev_addr[i], ioaddr + i);
-	for (; i < 12; i += 2)
-		outw(0, ioaddr + i);
-
-	if (dev->if_port == 3)
-		/* Start the thinnet transceiver. We should really wait 50ms... */
-		outw(StartCoax, ioaddr + EL3_CMD);
-	EL3WINDOW(4);
-	outw((inw(ioaddr + Wn4_Media) & ~(Media_10TP | Media_SQE)) |
-	     media_tbl[dev->if_port].media_bits, ioaddr + Wn4_Media);
-
-	/* Switch to the stats window, and clear all stats by reading. */
-	outw(StatsDisable, ioaddr + EL3_CMD);
-	EL3WINDOW(6);
-	for (i = 0; i < 10; i++)
-		inb(ioaddr + i);
-	inw(ioaddr + 10);
-	inw(ioaddr + 12);
-	/* New: On the Vortex we must also clear the BadSSD counter. */
-	EL3WINDOW(4);
-	inb(ioaddr + 12);
-	/* ..and on the Boomerang we enable the extra statistics bits. */
-	outw(0x0040, ioaddr + Wn4_NetDiag);
-
-	/* Switch to register set 7 for normal use. */
-	EL3WINDOW(7);
-
-	if (vp->full_bus_master_rx) {	/* Boomerang bus master. */
-		vp->cur_rx = vp->dirty_rx = 0;
-		if (corkscrew_debug > 2)
-			pr_debug("%s:  Filling in the Rx ring.\n", dev->name);
-		for (i = 0; i < RX_RING_SIZE; i++) {
-			struct sk_buff *skb;
-			if (i < (RX_RING_SIZE - 1))
-				vp->rx_ring[i].next =
-				    isa_virt_to_bus(&vp->rx_ring[i + 1]);
-			else
-				vp->rx_ring[i].next = 0;
-			vp->rx_ring[i].status = 0;	/* Clear complete bit. */
-			vp->rx_ring[i].length = PKT_BUF_SZ | 0x80000000;
-			skb = dev_alloc_skb(PKT_BUF_SZ);
-			vp->rx_skbuff[i] = skb;
-			if (skb == NULL)
-				break;	/* Bad news!  */
-			skb->dev = dev;	/* Mark as being used by this device. */
-			skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
-			vp->rx_ring[i].addr = isa_virt_to_bus(skb->data);
-		}
-		if (i != 0)
-			vp->rx_ring[i - 1].next =
-				isa_virt_to_bus(&vp->rx_ring[0]);	/* Wrap the ring. */
-		outl(isa_virt_to_bus(&vp->rx_ring[0]), ioaddr + UpListPtr);
-	}
-	if (vp->full_bus_master_tx) {	/* Boomerang bus master Tx. */
-		vp->cur_tx = vp->dirty_tx = 0;
-		outb(PKT_BUF_SZ >> 8, ioaddr + TxFreeThreshold);	/* Room for a packet. */
-		/* Clear the Tx ring. */
-		for (i = 0; i < TX_RING_SIZE; i++)
-			vp->tx_skbuff[i] = NULL;
-		outl(0, ioaddr + DownListPtr);
-	}
-	/* Set receiver mode: presumably accept b-case and phys addr only. */
-	set_rx_mode(dev);
-	outw(StatsEnable, ioaddr + EL3_CMD);	/* Turn on statistics. */
-
-	netif_start_queue(dev);
-
-	outw(RxEnable, ioaddr + EL3_CMD);	/* Enable the receiver. */
-	outw(TxEnable, ioaddr + EL3_CMD);	/* Enable transmitter. */
-	/* Allow status bits to be seen. */
-	outw(SetStatusEnb | AdapterFailure | IntReq | StatsFull |
-	     (vp->full_bus_master_tx ? DownComplete : TxAvailable) |
-	     (vp->full_bus_master_rx ? UpComplete : RxComplete) |
-	     (vp->bus_master ? DMADone : 0), ioaddr + EL3_CMD);
-	/* Ack all pending events, and set active indicator mask. */
-	outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
-	     ioaddr + EL3_CMD);
-	outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull
-	     | (vp->bus_master ? DMADone : 0) | UpComplete | DownComplete,
-	     ioaddr + EL3_CMD);
-
-	return 0;
-}
-
-static void corkscrew_timer(unsigned long data)
-{
-#ifdef AUTOMEDIA
-	struct net_device *dev = (struct net_device *) data;
-	struct corkscrew_private *vp = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-	unsigned long flags;
-	int ok = 0;
-
-	if (corkscrew_debug > 1)
-		pr_debug("%s: Media selection timer tick happened, %s.\n",
-		       dev->name, media_tbl[dev->if_port].name);
-
-	spin_lock_irqsave(&vp->lock, flags);
-
-	{
-		int old_window = inw(ioaddr + EL3_CMD) >> 13;
-		int media_status;
-		EL3WINDOW(4);
-		media_status = inw(ioaddr + Wn4_Media);
-		switch (dev->if_port) {
-		case 0:
-		case 4:
-		case 5:	/* 10baseT, 100baseTX, 100baseFX  */
-			if (media_status & Media_LnkBeat) {
-				ok = 1;
-				if (corkscrew_debug > 1)
-					pr_debug("%s: Media %s has link beat, %x.\n",
-						dev->name,
-						media_tbl[dev->if_port].name,
-						media_status);
-			} else if (corkscrew_debug > 1)
-				pr_debug("%s: Media %s is has no link beat, %x.\n",
-					dev->name,
-					media_tbl[dev->if_port].name,
-					media_status);
-
-			break;
-		default:	/* Other media types handled by Tx timeouts. */
-			if (corkscrew_debug > 1)
-				pr_debug("%s: Media %s is has no indication, %x.\n",
-					dev->name,
-					media_tbl[dev->if_port].name,
-					media_status);
-			ok = 1;
-		}
-		if (!ok) {
-			__u32 config;
-
-			do {
-				dev->if_port =
-				    media_tbl[dev->if_port].next;
-			}
-			while (!(vp->available_media & media_tbl[dev->if_port].mask));
-
-			if (dev->if_port == 8) {	/* Go back to default. */
-				dev->if_port = vp->default_media;
-				if (corkscrew_debug > 1)
-					pr_debug("%s: Media selection failing, using default %s port.\n",
-						dev->name,
-						media_tbl[dev->if_port].name);
-			} else {
-				if (corkscrew_debug > 1)
-					pr_debug("%s: Media selection failed, now trying %s port.\n",
-						dev->name,
-						media_tbl[dev->if_port].name);
-				vp->timer.expires = jiffies + media_tbl[dev->if_port].wait;
-				add_timer(&vp->timer);
-			}
-			outw((media_status & ~(Media_10TP | Media_SQE)) |
-			     media_tbl[dev->if_port].media_bits,
-			     ioaddr + Wn4_Media);
-
-			EL3WINDOW(3);
-			config = inl(ioaddr + Wn3_Config);
-			config = (config & ~Xcvr) | (dev->if_port << Xcvr_shift);
-			outl(config, ioaddr + Wn3_Config);
-
-			outw(dev->if_port == 3 ? StartCoax : StopCoax,
-			     ioaddr + EL3_CMD);
-		}
-		EL3WINDOW(old_window);
-	}
-
-	spin_unlock_irqrestore(&vp->lock, flags);
-	if (corkscrew_debug > 1)
-		pr_debug("%s: Media selection timer finished, %s.\n",
-		       dev->name, media_tbl[dev->if_port].name);
-
-#endif				/* AUTOMEDIA */
-}
-
-static void corkscrew_timeout(struct net_device *dev)
-{
-	int i;
-	struct corkscrew_private *vp = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-
-	pr_warning("%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
-	       dev->name, inb(ioaddr + TxStatus),
-	       inw(ioaddr + EL3_STATUS));
-	/* Slight code bloat to be user friendly. */
-	if ((inb(ioaddr + TxStatus) & 0x88) == 0x88)
-		pr_warning("%s: Transmitter encountered 16 collisions --"
-		       " network cable problem?\n", dev->name);
-#ifndef final_version
-	pr_debug("  Flags; bus-master %d, full %d; dirty %d current %d.\n",
-	       vp->full_bus_master_tx, vp->tx_full, vp->dirty_tx,
-	       vp->cur_tx);
-	pr_debug("  Down list %8.8x vs. %p.\n", inl(ioaddr + DownListPtr),
-	       &vp->tx_ring[0]);
-	for (i = 0; i < TX_RING_SIZE; i++) {
-		pr_debug("  %d: %p  length %8.8x status %8.8x\n", i,
-		       &vp->tx_ring[i],
-		       vp->tx_ring[i].length, vp->tx_ring[i].status);
-	}
-#endif
-	/* Issue TX_RESET and TX_START commands. */
-	outw(TxReset, ioaddr + EL3_CMD);
-	for (i = 20; i >= 0; i--)
-		if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress))
-			break;
-	outw(TxEnable, ioaddr + EL3_CMD);
-	dev->trans_start = jiffies; /* prevent tx timeout */
-	dev->stats.tx_errors++;
-	dev->stats.tx_dropped++;
-	netif_wake_queue(dev);
-}
-
-static netdev_tx_t corkscrew_start_xmit(struct sk_buff *skb,
-					struct net_device *dev)
-{
-	struct corkscrew_private *vp = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-
-	/* Block a timer-based transmit from overlapping. */
-
-	netif_stop_queue(dev);
-
-	if (vp->full_bus_master_tx) {	/* BOOMERANG bus-master */
-		/* Calculate the next Tx descriptor entry. */
-		int entry = vp->cur_tx % TX_RING_SIZE;
-		struct boom_tx_desc *prev_entry;
-		unsigned long flags;
-		int i;
-
-		if (vp->tx_full)	/* No room to transmit with */
-			return NETDEV_TX_BUSY;
-		if (vp->cur_tx != 0)
-			prev_entry = &vp->tx_ring[(vp->cur_tx - 1) % TX_RING_SIZE];
-		else
-			prev_entry = NULL;
-		if (corkscrew_debug > 3)
-			pr_debug("%s: Trying to send a packet, Tx index %d.\n",
-				dev->name, vp->cur_tx);
-		/* vp->tx_full = 1; */
-		vp->tx_skbuff[entry] = skb;
-		vp->tx_ring[entry].next = 0;
-		vp->tx_ring[entry].addr = isa_virt_to_bus(skb->data);
-		vp->tx_ring[entry].length = skb->len | 0x80000000;
-		vp->tx_ring[entry].status = skb->len | 0x80000000;
-
-		spin_lock_irqsave(&vp->lock, flags);
-		outw(DownStall, ioaddr + EL3_CMD);
-		/* Wait for the stall to complete. */
-		for (i = 20; i >= 0; i--)
-			if ((inw(ioaddr + EL3_STATUS) & CmdInProgress) == 0)
-				break;
-		if (prev_entry)
-			prev_entry->next = isa_virt_to_bus(&vp->tx_ring[entry]);
-		if (inl(ioaddr + DownListPtr) == 0) {
-			outl(isa_virt_to_bus(&vp->tx_ring[entry]),
-			     ioaddr + DownListPtr);
-			queued_packet++;
-		}
-		outw(DownUnstall, ioaddr + EL3_CMD);
-		spin_unlock_irqrestore(&vp->lock, flags);
-
-		vp->cur_tx++;
-		if (vp->cur_tx - vp->dirty_tx > TX_RING_SIZE - 1)
-			vp->tx_full = 1;
-		else {		/* Clear previous interrupt enable. */
-			if (prev_entry)
-				prev_entry->status &= ~0x80000000;
-			netif_wake_queue(dev);
-		}
-		return NETDEV_TX_OK;
-	}
-	/* Put out the doubleword header... */
-	outl(skb->len, ioaddr + TX_FIFO);
-	dev->stats.tx_bytes += skb->len;
-#ifdef VORTEX_BUS_MASTER
-	if (vp->bus_master) {
-		/* Set the bus-master controller to transfer the packet. */
-		outl((int) (skb->data), ioaddr + Wn7_MasterAddr);
-		outw((skb->len + 3) & ~3, ioaddr + Wn7_MasterLen);
-		vp->tx_skb = skb;
-		outw(StartDMADown, ioaddr + EL3_CMD);
-		/* queue will be woken at the DMADone interrupt. */
-	} else {
-		/* ... and the packet rounded to a doubleword. */
-		outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
-		dev_kfree_skb(skb);
-		if (inw(ioaddr + TxFree) > 1536) {
-			netif_wake_queue(dev);
-		} else
-			/* Interrupt us when the FIFO has room for max-sized packet. */
-			outw(SetTxThreshold + (1536 >> 2),
-			     ioaddr + EL3_CMD);
-	}
-#else
-	/* ... and the packet rounded to a doubleword. */
-	outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
-	dev_kfree_skb(skb);
-	if (inw(ioaddr + TxFree) > 1536) {
-		netif_wake_queue(dev);
-	} else
-		/* Interrupt us when the FIFO has room for max-sized packet. */
-		outw(SetTxThreshold + (1536 >> 2), ioaddr + EL3_CMD);
-#endif				/* bus master */
-
-
-	/* Clear the Tx status stack. */
-	{
-		short tx_status;
-		int i = 4;
-
-		while (--i > 0 && (tx_status = inb(ioaddr + TxStatus)) > 0) {
-			if (tx_status & 0x3C) {	/* A Tx-disabling error occurred.  */
-				if (corkscrew_debug > 2)
-					pr_debug("%s: Tx error, status %2.2x.\n",
-						dev->name, tx_status);
-				if (tx_status & 0x04)
-					dev->stats.tx_fifo_errors++;
-				if (tx_status & 0x38)
-					dev->stats.tx_aborted_errors++;
-				if (tx_status & 0x30) {
-					int j;
-					outw(TxReset, ioaddr + EL3_CMD);
-					for (j = 20; j >= 0; j--)
-						if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress))
-							break;
-				}
-				outw(TxEnable, ioaddr + EL3_CMD);
-			}
-			outb(0x00, ioaddr + TxStatus);	/* Pop the status stack. */
-		}
-	}
-	return NETDEV_TX_OK;
-}
-
-/* The interrupt handler does all of the Rx thread work and cleans up
-   after the Tx thread. */
-
-static irqreturn_t corkscrew_interrupt(int irq, void *dev_id)
-{
-	/* Use the now-standard shared IRQ implementation. */
-	struct net_device *dev = dev_id;
-	struct corkscrew_private *lp = netdev_priv(dev);
-	int ioaddr, status;
-	int latency;
-	int i = max_interrupt_work;
-
-	ioaddr = dev->base_addr;
-	latency = inb(ioaddr + Timer);
-
-	spin_lock(&lp->lock);
-
-	status = inw(ioaddr + EL3_STATUS);
-
-	if (corkscrew_debug > 4)
-		pr_debug("%s: interrupt, status %4.4x, timer %d.\n",
-			dev->name, status, latency);
-	if ((status & 0xE000) != 0xE000) {
-		static int donedidthis;
-		/* Some interrupt controllers store a bogus interrupt from boot-time.
-		   Ignore a single early interrupt, but don't hang the machine for
-		   other interrupt problems. */
-		if (donedidthis++ > 100) {
-			pr_err("%s: Bogus interrupt, bailing. Status %4.4x, start=%d.\n",
-				   dev->name, status, netif_running(dev));
-			free_irq(dev->irq, dev);
-			dev->irq = -1;
-		}
-	}
-
-	do {
-		if (corkscrew_debug > 5)
-			pr_debug("%s: In interrupt loop, status %4.4x.\n",
-			       dev->name, status);
-		if (status & RxComplete)
-			corkscrew_rx(dev);
-
-		if (status & TxAvailable) {
-			if (corkscrew_debug > 5)
-				pr_debug("	TX room bit was handled.\n");
-			/* There's room in the FIFO for a full-sized packet. */
-			outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
-			netif_wake_queue(dev);
-		}
-		if (status & DownComplete) {
-			unsigned int dirty_tx = lp->dirty_tx;
-
-			while (lp->cur_tx - dirty_tx > 0) {
-				int entry = dirty_tx % TX_RING_SIZE;
-				if (inl(ioaddr + DownListPtr) == isa_virt_to_bus(&lp->tx_ring[entry]))
-					break;	/* It still hasn't been processed. */
-				if (lp->tx_skbuff[entry]) {
-					dev_kfree_skb_irq(lp->tx_skbuff[entry]);
-					lp->tx_skbuff[entry] = NULL;
-				}
-				dirty_tx++;
-			}
-			lp->dirty_tx = dirty_tx;
-			outw(AckIntr | DownComplete, ioaddr + EL3_CMD);
-			if (lp->tx_full && (lp->cur_tx - dirty_tx <= TX_RING_SIZE - 1)) {
-				lp->tx_full = 0;
-				netif_wake_queue(dev);
-			}
-		}
-#ifdef VORTEX_BUS_MASTER
-		if (status & DMADone) {
-			outw(0x1000, ioaddr + Wn7_MasterStatus);	/* Ack the event. */
-			dev_kfree_skb_irq(lp->tx_skb);	/* Release the transferred buffer */
-			netif_wake_queue(dev);
-		}
-#endif
-		if (status & UpComplete) {
-			boomerang_rx(dev);
-			outw(AckIntr | UpComplete, ioaddr + EL3_CMD);
-		}
-		if (status & (AdapterFailure | RxEarly | StatsFull)) {
-			/* Handle all uncommon interrupts at once. */
-			if (status & RxEarly) {	/* Rx early is unused. */
-				corkscrew_rx(dev);
-				outw(AckIntr | RxEarly, ioaddr + EL3_CMD);
-			}
-			if (status & StatsFull) {	/* Empty statistics. */
-				static int DoneDidThat;
-				if (corkscrew_debug > 4)
-					pr_debug("%s: Updating stats.\n", dev->name);
-				update_stats(ioaddr, dev);
-				/* DEBUG HACK: Disable statistics as an interrupt source. */
-				/* This occurs when we have the wrong media type! */
-				if (DoneDidThat == 0 && inw(ioaddr + EL3_STATUS) & StatsFull) {
-					int win, reg;
-					pr_notice("%s: Updating stats failed, disabling stats as an interrupt source.\n",
-						dev->name);
-					for (win = 0; win < 8; win++) {
-						EL3WINDOW(win);
-						pr_notice("Vortex window %d:", win);
-						for (reg = 0; reg < 16; reg++)
-							pr_cont(" %2.2x", inb(ioaddr + reg));
-						pr_cont("\n");
-					}
-					EL3WINDOW(7);
-					outw(SetIntrEnb | TxAvailable |
-					     RxComplete | AdapterFailure |
-					     UpComplete | DownComplete |
-					     TxComplete, ioaddr + EL3_CMD);
-					DoneDidThat++;
-				}
-			}
-			if (status & AdapterFailure) {
-				/* Adapter failure requires Rx reset and reinit. */
-				outw(RxReset, ioaddr + EL3_CMD);
-				/* Set the Rx filter to the current state. */
-				set_rx_mode(dev);
-				outw(RxEnable, ioaddr + EL3_CMD);	/* Re-enable the receiver. */
-				outw(AckIntr | AdapterFailure,
-				     ioaddr + EL3_CMD);
-			}
-		}
-
-		if (--i < 0) {
-			pr_err("%s: Too much work in interrupt, status %4.4x. Disabling functions (%4.4x).\n",
-				dev->name, status, SetStatusEnb | ((~status) & 0x7FE));
-			/* Disable all pending interrupts. */
-			outw(SetStatusEnb | ((~status) & 0x7FE), ioaddr + EL3_CMD);
-			outw(AckIntr | 0x7FF, ioaddr + EL3_CMD);
-			break;
-		}
-		/* Acknowledge the IRQ. */
-		outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
-
-	} while ((status = inw(ioaddr + EL3_STATUS)) & (IntLatch | RxComplete));
-
-	spin_unlock(&lp->lock);
-
-	if (corkscrew_debug > 4)
-		pr_debug("%s: exiting interrupt, status %4.4x.\n", dev->name, status);
-	return IRQ_HANDLED;
-}
-
-static int corkscrew_rx(struct net_device *dev)
-{
-	int ioaddr = dev->base_addr;
-	int i;
-	short rx_status;
-
-	if (corkscrew_debug > 5)
-		pr_debug("   In rx_packet(), status %4.4x, rx_status %4.4x.\n",
-		     inw(ioaddr + EL3_STATUS), inw(ioaddr + RxStatus));
-	while ((rx_status = inw(ioaddr + RxStatus)) > 0) {
-		if (rx_status & 0x4000) {	/* Error, update stats. */
-			unsigned char rx_error = inb(ioaddr + RxErrors);
-			if (corkscrew_debug > 2)
-				pr_debug(" Rx error: status %2.2x.\n",
-				       rx_error);
-			dev->stats.rx_errors++;
-			if (rx_error & 0x01)
-				dev->stats.rx_over_errors++;
-			if (rx_error & 0x02)
-				dev->stats.rx_length_errors++;
-			if (rx_error & 0x04)
-				dev->stats.rx_frame_errors++;
-			if (rx_error & 0x08)
-				dev->stats.rx_crc_errors++;
-			if (rx_error & 0x10)
-				dev->stats.rx_length_errors++;
-		} else {
-			/* The packet length: up to 4.5K!. */
-			short pkt_len = rx_status & 0x1fff;
-			struct sk_buff *skb;
-
-			skb = dev_alloc_skb(pkt_len + 5 + 2);
-			if (corkscrew_debug > 4)
-				pr_debug("Receiving packet size %d status %4.4x.\n",
-				     pkt_len, rx_status);
-			if (skb != NULL) {
-				skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
-				/* 'skb_put()' points to the start of sk_buff data area. */
-				insl(ioaddr + RX_FIFO,
-				     skb_put(skb, pkt_len),
-				     (pkt_len + 3) >> 2);
-				outw(RxDiscard, ioaddr + EL3_CMD);	/* Pop top Rx packet. */
-				skb->protocol = eth_type_trans(skb, dev);
-				netif_rx(skb);
-				dev->stats.rx_packets++;
-				dev->stats.rx_bytes += pkt_len;
-				/* Wait a limited time to go to next packet. */
-				for (i = 200; i >= 0; i--)
-					if (! (inw(ioaddr + EL3_STATUS) & CmdInProgress))
-						break;
-				continue;
-			} else if (corkscrew_debug)
-				pr_debug("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, pkt_len);
-		}
-		outw(RxDiscard, ioaddr + EL3_CMD);
-		dev->stats.rx_dropped++;
-		/* Wait a limited time to skip this packet. */
-		for (i = 200; i >= 0; i--)
-			if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress))
-				break;
-	}
-	return 0;
-}
-
-static int boomerang_rx(struct net_device *dev)
-{
-	struct corkscrew_private *vp = netdev_priv(dev);
-	int entry = vp->cur_rx % RX_RING_SIZE;
-	int ioaddr = dev->base_addr;
-	int rx_status;
-
-	if (corkscrew_debug > 5)
-		pr_debug("   In boomerang_rx(), status %4.4x, rx_status %4.4x.\n",
-			inw(ioaddr + EL3_STATUS), inw(ioaddr + RxStatus));
-	while ((rx_status = vp->rx_ring[entry].status) & RxDComplete) {
-		if (rx_status & RxDError) {	/* Error, update stats. */
-			unsigned char rx_error = rx_status >> 16;
-			if (corkscrew_debug > 2)
-				pr_debug(" Rx error: status %2.2x.\n",
-				       rx_error);
-			dev->stats.rx_errors++;
-			if (rx_error & 0x01)
-				dev->stats.rx_over_errors++;
-			if (rx_error & 0x02)
-				dev->stats.rx_length_errors++;
-			if (rx_error & 0x04)
-				dev->stats.rx_frame_errors++;
-			if (rx_error & 0x08)
-				dev->stats.rx_crc_errors++;
-			if (rx_error & 0x10)
-				dev->stats.rx_length_errors++;
-		} else {
-			/* The packet length: up to 4.5K!. */
-			short pkt_len = rx_status & 0x1fff;
-			struct sk_buff *skb;
-
-			dev->stats.rx_bytes += pkt_len;
-			if (corkscrew_debug > 4)
-				pr_debug("Receiving packet size %d status %4.4x.\n",
-				     pkt_len, rx_status);
-
-			/* Check if the packet is long enough to just accept without
-			   copying to a properly sized skbuff. */
-			if (pkt_len < rx_copybreak &&
-			    (skb = dev_alloc_skb(pkt_len + 4)) != NULL) {
-				skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
-				/* 'skb_put()' points to the start of sk_buff data area. */
-				memcpy(skb_put(skb, pkt_len),
-				       isa_bus_to_virt(vp->rx_ring[entry].
-						   addr), pkt_len);
-				rx_copy++;
-			} else {
-				void *temp;
-				/* Pass up the skbuff already on the Rx ring. */
-				skb = vp->rx_skbuff[entry];
-				vp->rx_skbuff[entry] = NULL;
-				temp = skb_put(skb, pkt_len);
-				/* Remove this checking code for final release. */
-				if (isa_bus_to_virt(vp->rx_ring[entry].addr) != temp)
-					pr_warning("%s: Warning -- the skbuff addresses do not match"
-					     " in boomerang_rx: %p vs. %p / %p.\n",
-					     dev->name,
-					     isa_bus_to_virt(vp->
-							 rx_ring[entry].
-							 addr), skb->head,
-					     temp);
-				rx_nocopy++;
-			}
-			skb->protocol = eth_type_trans(skb, dev);
-			netif_rx(skb);
-			dev->stats.rx_packets++;
-		}
-		entry = (++vp->cur_rx) % RX_RING_SIZE;
-	}
-	/* Refill the Rx ring buffers. */
-	for (; vp->cur_rx - vp->dirty_rx > 0; vp->dirty_rx++) {
-		struct sk_buff *skb;
-		entry = vp->dirty_rx % RX_RING_SIZE;
-		if (vp->rx_skbuff[entry] == NULL) {
-			skb = dev_alloc_skb(PKT_BUF_SZ);
-			if (skb == NULL)
-				break;	/* Bad news!  */
-			skb->dev = dev;	/* Mark as being used by this device. */
-			skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
-			vp->rx_ring[entry].addr = isa_virt_to_bus(skb->data);
-			vp->rx_skbuff[entry] = skb;
-		}
-		vp->rx_ring[entry].status = 0;	/* Clear complete bit. */
-	}
-	return 0;
-}
-
-static int corkscrew_close(struct net_device *dev)
-{
-	struct corkscrew_private *vp = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-	int i;
-
-	netif_stop_queue(dev);
-
-	if (corkscrew_debug > 1) {
-		pr_debug("%s: corkscrew_close() status %4.4x, Tx status %2.2x.\n",
-		     dev->name, inw(ioaddr + EL3_STATUS),
-		     inb(ioaddr + TxStatus));
-		pr_debug("%s: corkscrew close stats: rx_nocopy %d rx_copy %d tx_queued %d.\n",
-			dev->name, rx_nocopy, rx_copy, queued_packet);
-	}
-
-	del_timer(&vp->timer);
-
-	/* Turn off statistics ASAP.  We update lp->stats below. */
-	outw(StatsDisable, ioaddr + EL3_CMD);
-
-	/* Disable the receiver and transmitter. */
-	outw(RxDisable, ioaddr + EL3_CMD);
-	outw(TxDisable, ioaddr + EL3_CMD);
-
-	if (dev->if_port == XCVR_10base2)
-		/* Turn off thinnet power.  Green! */
-		outw(StopCoax, ioaddr + EL3_CMD);
-
-	free_irq(dev->irq, dev);
-
-	outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD);
-
-	update_stats(ioaddr, dev);
-	if (vp->full_bus_master_rx) {	/* Free Boomerang bus master Rx buffers. */
-		outl(0, ioaddr + UpListPtr);
-		for (i = 0; i < RX_RING_SIZE; i++)
-			if (vp->rx_skbuff[i]) {
-				dev_kfree_skb(vp->rx_skbuff[i]);
-				vp->rx_skbuff[i] = NULL;
-			}
-	}
-	if (vp->full_bus_master_tx) {	/* Free Boomerang bus master Tx buffers. */
-		outl(0, ioaddr + DownListPtr);
-		for (i = 0; i < TX_RING_SIZE; i++)
-			if (vp->tx_skbuff[i]) {
-				dev_kfree_skb(vp->tx_skbuff[i]);
-				vp->tx_skbuff[i] = NULL;
-			}
-	}
-
-	return 0;
-}
-
-static struct net_device_stats *corkscrew_get_stats(struct net_device *dev)
-{
-	struct corkscrew_private *vp = netdev_priv(dev);
-	unsigned long flags;
-
-	if (netif_running(dev)) {
-		spin_lock_irqsave(&vp->lock, flags);
-		update_stats(dev->base_addr, dev);
-		spin_unlock_irqrestore(&vp->lock, flags);
-	}
-	return &dev->stats;
-}
-
-/*  Update statistics.
-	Unlike with the EL3 we need not worry about interrupts changing
-	the window setting from underneath us, but we must still guard
-	against a race condition with a StatsUpdate interrupt updating the
-	table.  This is done by checking that the ASM (!) code generated uses
-	atomic updates with '+='.
-	*/
-static void update_stats(int ioaddr, struct net_device *dev)
-{
-	/* Unlike the 3c5x9 we need not turn off stats updates while reading. */
-	/* Switch to the stats window, and read everything. */
-	EL3WINDOW(6);
-	dev->stats.tx_carrier_errors += inb(ioaddr + 0);
-	dev->stats.tx_heartbeat_errors += inb(ioaddr + 1);
-	/* Multiple collisions. */ inb(ioaddr + 2);
-	dev->stats.collisions += inb(ioaddr + 3);
-	dev->stats.tx_window_errors += inb(ioaddr + 4);
-	dev->stats.rx_fifo_errors += inb(ioaddr + 5);
-	dev->stats.tx_packets += inb(ioaddr + 6);
-	dev->stats.tx_packets += (inb(ioaddr + 9) & 0x30) << 4;
-						/* Rx packets   */ inb(ioaddr + 7);
-						/* Must read to clear */
-	/* Tx deferrals */ inb(ioaddr + 8);
-	/* Don't bother with register 9, an extension of registers 6&7.
-	   If we do use the 6&7 values the atomic update assumption above
-	   is invalid. */
-	inw(ioaddr + 10);	/* Total Rx and Tx octets. */
-	inw(ioaddr + 12);
-	/* New: On the Vortex we must also clear the BadSSD counter. */
-	EL3WINDOW(4);
-	inb(ioaddr + 12);
-
-	/* We change back to window 7 (not 1) with the Vortex. */
-	EL3WINDOW(7);
-}
-
-/* This new version of set_rx_mode() supports v1.4 kernels.
-   The Vortex chip has no documented multicast filter, so the only
-   multicast setting is to receive all multicast frames.  At least
-   the chip has a very clean way to set the mode, unlike many others. */
-static void set_rx_mode(struct net_device *dev)
-{
-	int ioaddr = dev->base_addr;
-	short new_mode;
-
-	if (dev->flags & IFF_PROMISC) {
-		if (corkscrew_debug > 3)
-			pr_debug("%s: Setting promiscuous mode.\n",
-			       dev->name);
-		new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm;
-	} else if (!netdev_mc_empty(dev) || dev->flags & IFF_ALLMULTI) {
-		new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast;
-	} else
-		new_mode = SetRxFilter | RxStation | RxBroadcast;
-
-	outw(new_mode, ioaddr + EL3_CMD);
-}
-
-static void netdev_get_drvinfo(struct net_device *dev,
-			       struct ethtool_drvinfo *info)
-{
-	strcpy(info->driver, DRV_NAME);
-	strcpy(info->version, DRV_VERSION);
-	sprintf(info->bus_info, "ISA 0x%lx", dev->base_addr);
-}
-
-static u32 netdev_get_msglevel(struct net_device *dev)
-{
-	return corkscrew_debug;
-}
-
-static void netdev_set_msglevel(struct net_device *dev, u32 level)
-{
-	corkscrew_debug = level;
-}
-
-static const struct ethtool_ops netdev_ethtool_ops = {
-	.get_drvinfo		= netdev_get_drvinfo,
-	.get_msglevel		= netdev_get_msglevel,
-	.set_msglevel		= netdev_set_msglevel,
-};
-
-
-#ifdef MODULE
-void cleanup_module(void)
-{
-	while (!list_empty(&root_corkscrew_dev)) {
-		struct net_device *dev;
-		struct corkscrew_private *vp;
-
-		vp = list_entry(root_corkscrew_dev.next,
-				struct corkscrew_private, list);
-		dev = vp->our_dev;
-		unregister_netdev(dev);
-		cleanup_card(dev);
-		free_netdev(dev);
-	}
-}
-#endif				/* MODULE */