Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 862 insertions, 0 deletions

diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c
new file mode 100644
index 000000000000..942a2819576c
--- /dev/null
+++ b/drivers/net/arm/etherh.c
@@ -0,0 +1,862 @@
+/*
+ *  linux/drivers/acorn/net/etherh.c
+ *
+ *  Copyright (C) 2000-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * NS8390 I-cubed EtherH and ANT EtherM specific driver
+ * Thanks to I-Cubed for information on their cards.
+ * EtherM conversion (C) 1999 Chris Kemp and Tim Watterton
+ * EtherM integration (C) 2000 Aleph One Ltd (Tak-Shing Chan)
+ * EtherM integration re-engineered by Russell King.
+ *
+ * Changelog:
+ *  08-12-1996	RMK	1.00	Created
+ *		RMK	1.03	Added support for EtherLan500 cards
+ *  23-11-1997	RMK	1.04	Added media autodetection
+ *  16-04-1998	RMK	1.05	Improved media autodetection
+ *  10-02-2000	RMK	1.06	Updated for 2.3.43
+ *  13-05-2000	RMK	1.07	Updated for 2.3.99-pre8
+ *  12-10-1999  CK/TEW		EtherM driver first release
+ *  21-12-2000	TTC		EtherH/EtherM integration
+ *  25-12-2000	RMK	1.08	Clean integration of EtherM into this driver.
+ *  03-01-2002	RMK	1.09	Always enable IRQs if we're in the nic slot.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+
+#include <asm/system.h>
+#include <asm/ecard.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include "../8390.h"
+
+#define NET_DEBUG  0
+#define DEBUG_INIT 2
+
+#define DRV_NAME	"etherh"
+#define DRV_VERSION	"1.11"
+
+static unsigned int net_debug = NET_DEBUG;
+
+struct etherh_priv {
+	void __iomem	*ioc_fast;
+	void __iomem	*memc;
+	void __iomem	*dma_base;
+	unsigned int	id;
+	void __iomem	*ctrl_port;
+	unsigned char	ctrl;
+	u32		supported;
+};
+
+struct etherh_data {
+	unsigned long	ns8390_offset;
+	unsigned long	dataport_offset;
+	unsigned long	ctrlport_offset;
+	int		ctrl_ioc;
+	const char	name[16];
+	u32		supported;
+	unsigned char	tx_start_page;
+	unsigned char	stop_page;
+};
+
+MODULE_AUTHOR("Russell King");
+MODULE_DESCRIPTION("EtherH/EtherM driver");
+MODULE_LICENSE("GPL");
+
+static char version[] __initdata =
+	"EtherH/EtherM Driver (c) 2002-2004 Russell King " DRV_VERSION "\n";
+
+#define ETHERH500_DATAPORT	0x800	/* MEMC */
+#define ETHERH500_NS8390	0x000	/* MEMC */
+#define ETHERH500_CTRLPORT	0x800	/* IOC  */
+
+#define ETHERH600_DATAPORT	0x040	/* MEMC */
+#define ETHERH600_NS8390	0x800	/* MEMC */
+#define ETHERH600_CTRLPORT	0x200	/* MEMC */
+
+#define ETHERH_CP_IE		1
+#define ETHERH_CP_IF		2
+#define ETHERH_CP_HEARTBEAT	2
+
+#define ETHERH_TX_START_PAGE	1
+#define ETHERH_STOP_PAGE	127
+
+/*
+ * These came from CK/TEW
+ */
+#define ETHERM_DATAPORT		0x200	/* MEMC */
+#define ETHERM_NS8390		0x800	/* MEMC */
+#define ETHERM_CTRLPORT		0x23c	/* MEMC */
+
+#define ETHERM_TX_START_PAGE	64
+#define ETHERM_STOP_PAGE	127
+
+/* ------------------------------------------------------------------------ */
+
+#define etherh_priv(dev) \
+ ((struct etherh_priv *)(((char *)netdev_priv(dev)) + sizeof(struct ei_device)))
+
+static inline void etherh_set_ctrl(struct etherh_priv *eh, unsigned char mask)
+{
+	unsigned char ctrl = eh->ctrl | mask;
+	eh->ctrl = ctrl;
+	writeb(ctrl, eh->ctrl_port);
+}
+
+static inline void etherh_clr_ctrl(struct etherh_priv *eh, unsigned char mask)
+{
+	unsigned char ctrl = eh->ctrl & ~mask;
+	eh->ctrl = ctrl;
+	writeb(ctrl, eh->ctrl_port);
+}
+
+static inline unsigned int etherh_get_stat(struct etherh_priv *eh)
+{
+	return readb(eh->ctrl_port);
+}
+
+
+
+
+static void etherh_irq_enable(ecard_t *ec, int irqnr)
+{
+	struct etherh_priv *eh = ec->irq_data;
+
+	etherh_set_ctrl(eh, ETHERH_CP_IE);
+}
+
+static void etherh_irq_disable(ecard_t *ec, int irqnr)
+{
+	struct etherh_priv *eh = ec->irq_data;
+
+	etherh_clr_ctrl(eh, ETHERH_CP_IE);
+}
+
+static expansioncard_ops_t etherh_ops = {
+	.irqenable	= etherh_irq_enable,
+	.irqdisable	= etherh_irq_disable,
+};
+
+
+
+
+static void
+etherh_setif(struct net_device *dev)
+{
+	struct ei_device *ei_local = netdev_priv(dev);
+	unsigned long flags;
+	void __iomem *addr;
+
+	local_irq_save(flags);
+
+	/* set the interface type */
+	switch (etherh_priv(dev)->id) {
+	case PROD_I3_ETHERLAN600:
+	case PROD_I3_ETHERLAN600A:
+		addr = (void *)dev->base_addr + EN0_RCNTHI;
+
+		switch (dev->if_port) {
+		case IF_PORT_10BASE2:
+			writeb((readb(addr) & 0xf8) | 1, addr);
+			break;
+		case IF_PORT_10BASET:
+			writeb((readb(addr) & 0xf8), addr);
+			break;
+		}
+		break;
+
+	case PROD_I3_ETHERLAN500:
+		switch (dev->if_port) {
+		case IF_PORT_10BASE2:
+			etherh_clr_ctrl(etherh_priv(dev), ETHERH_CP_IF);
+			break;
+
+		case IF_PORT_10BASET:
+			etherh_set_ctrl(etherh_priv(dev), ETHERH_CP_IF);
+			break;
+		}
+		break;
+
+	default:
+		break;
+	}
+
+	local_irq_restore(flags);
+}
+
+static int
+etherh_getifstat(struct net_device *dev)
+{
+	struct ei_device *ei_local = netdev_priv(dev);
+	void __iomem *addr;
+	int stat = 0;
+
+	switch (etherh_priv(dev)->id) {
+	case PROD_I3_ETHERLAN600:
+	case PROD_I3_ETHERLAN600A:
+		addr = (void *)dev->base_addr + EN0_RCNTHI;
+		switch (dev->if_port) {
+		case IF_PORT_10BASE2:
+			stat = 1;
+			break;
+		case IF_PORT_10BASET:
+			stat = readb(addr) & 4;
+			break;
+		}
+		break;
+
+	case PROD_I3_ETHERLAN500:
+		switch (dev->if_port) {
+		case IF_PORT_10BASE2:
+			stat = 1;
+			break;
+		case IF_PORT_10BASET:
+			stat = etherh_get_stat(etherh_priv(dev)) & ETHERH_CP_HEARTBEAT;
+			break;
+		}
+		break;
+
+	default:
+		stat = 0;
+		break;
+	}
+
+	return stat != 0;
+}
+
+/*
+ * Configure the interface.  Note that we ignore the other
+ * parts of ifmap, since its mostly meaningless for this driver.
+ */
+static int etherh_set_config(struct net_device *dev, struct ifmap *map)
+{
+	switch (map->port) {
+	case IF_PORT_10BASE2:
+	case IF_PORT_10BASET:
+		/*
+		 * If the user explicitly sets the interface
+		 * media type, turn off automedia detection.
+		 */
+		dev->flags &= ~IFF_AUTOMEDIA;
+		dev->if_port = map->port;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	etherh_setif(dev);
+
+	return 0;
+}
+
+/*
+ * Reset the 8390 (hard reset).  Note that we can't actually do this.
+ */
+static void
+etherh_reset(struct net_device *dev)
+{
+	struct ei_device *ei_local = netdev_priv(dev);
+	void __iomem *addr = (void *)dev->base_addr;
+
+	writeb(E8390_NODMA+E8390_PAGE0+E8390_STOP, addr);
+
+	/*
+	 * See if we need to change the interface type.
+	 * Note that we use 'interface_num' as a flag
+	 * to indicate that we need to change the media.
+	 */
+	if (dev->flags & IFF_AUTOMEDIA && ei_local->interface_num) {
+		ei_local->interface_num = 0;
+
+		if (dev->if_port == IF_PORT_10BASET)
+			dev->if_port = IF_PORT_10BASE2;
+		else
+			dev->if_port = IF_PORT_10BASET;
+
+		etherh_setif(dev);
+	}
+}
+
+/*
+ * Write a block of data out to the 8390
+ */
+static void
+etherh_block_output (struct net_device *dev, int count, const unsigned char *buf, int start_page)
+{
+	struct ei_device *ei_local = netdev_priv(dev);
+	unsigned long dma_start;
+	void __iomem *dma_base, *addr;
+
+	if (ei_local->dmaing) {
+		printk(KERN_ERR "%s: DMAing conflict in etherh_block_input: "
+			" DMAstat %d irqlock %d\n", dev->name,
+			ei_local->dmaing, ei_local->irqlock);
+		return;
+	}
+
+	/*
+	 * Make sure we have a round number of bytes if we're in word mode.
+	 */
+	if (count & 1 && ei_local->word16)
+		count++;
+
+	ei_local->dmaing = 1;
+
+	addr = (void *)dev->base_addr;
+	dma_base = etherh_priv(dev)->dma_base;
+
+	count = (count + 1) & ~1;
+	writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD);
+
+	writeb (0x42, addr + EN0_RCNTLO);
+	writeb (0x00, addr + EN0_RCNTHI);
+	writeb (0x42, addr + EN0_RSARLO);
+	writeb (0x00, addr + EN0_RSARHI);
+	writeb (E8390_RREAD | E8390_START, addr + E8390_CMD);
+
+	udelay (1);
+
+	writeb (ENISR_RDC, addr + EN0_ISR);
+	writeb (count, addr + EN0_RCNTLO);
+	writeb (count >> 8, addr + EN0_RCNTHI);
+	writeb (0, addr + EN0_RSARLO);
+	writeb (start_page, addr + EN0_RSARHI);
+	writeb (E8390_RWRITE | E8390_START, addr + E8390_CMD);
+
+	if (ei_local->word16)
+		writesw (dma_base, buf, count >> 1);
+	else
+		writesb (dma_base, buf, count);
+
+	dma_start = jiffies;
+
+	while ((readb (addr + EN0_ISR) & ENISR_RDC) == 0)
+		if (jiffies - dma_start > 2*HZ/100) { /* 20ms */
+			printk(KERN_ERR "%s: timeout waiting for TX RDC\n",
+				dev->name);
+			etherh_reset (dev);
+			NS8390_init (dev, 1);
+			break;
+		}
+
+	writeb (ENISR_RDC, addr + EN0_ISR);
+	ei_local->dmaing = 0;
+}
+
+/*
+ * Read a block of data from the 8390
+ */
+static void
+etherh_block_input (struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
+{
+	struct ei_device *ei_local = netdev_priv(dev);
+	unsigned char *buf;
+	void __iomem *dma_base, *addr;
+
+	if (ei_local->dmaing) {
+		printk(KERN_ERR "%s: DMAing conflict in etherh_block_input: "
+			" DMAstat %d irqlock %d\n", dev->name,
+			ei_local->dmaing, ei_local->irqlock);
+		return;
+	}
+
+	ei_local->dmaing = 1;
+
+	addr = (void *)dev->base_addr;
+	dma_base = etherh_priv(dev)->dma_base;
+
+	buf = skb->data;
+	writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD);
+	writeb (count, addr + EN0_RCNTLO);
+	writeb (count >> 8, addr + EN0_RCNTHI);
+	writeb (ring_offset, addr + EN0_RSARLO);
+	writeb (ring_offset >> 8, addr + EN0_RSARHI);
+	writeb (E8390_RREAD | E8390_START, addr + E8390_CMD);
+
+	if (ei_local->word16) {
+		readsw (dma_base, buf, count >> 1);
+		if (count & 1)
+			buf[count - 1] = readb (dma_base);
+	} else
+		readsb (dma_base, buf, count);
+
+	writeb (ENISR_RDC, addr + EN0_ISR);
+	ei_local->dmaing = 0;
+}
+
+/*
+ * Read a header from the 8390
+ */
+static void
+etherh_get_header (struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
+{
+	struct ei_device *ei_local = netdev_priv(dev);
+	void __iomem *dma_base, *addr;
+
+	if (ei_local->dmaing) {
+		printk(KERN_ERR "%s: DMAing conflict in etherh_get_header: "
+			" DMAstat %d irqlock %d\n", dev->name,
+			ei_local->dmaing, ei_local->irqlock);
+		return;
+	}
+
+	ei_local->dmaing = 1;
+
+	addr = (void *)dev->base_addr;
+	dma_base = etherh_priv(dev)->dma_base;
+
+	writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD);
+	writeb (sizeof (*hdr), addr + EN0_RCNTLO);
+	writeb (0, addr + EN0_RCNTHI);
+	writeb (0, addr + EN0_RSARLO);
+	writeb (ring_page, addr + EN0_RSARHI);
+	writeb (E8390_RREAD | E8390_START, addr + E8390_CMD);
+
+	if (ei_local->word16)
+		readsw (dma_base, hdr, sizeof (*hdr) >> 1);
+	else
+		readsb (dma_base, hdr, sizeof (*hdr));
+
+	writeb (ENISR_RDC, addr + EN0_ISR);
+	ei_local->dmaing = 0;
+}
+
+/*
+ * Open/initialize the board.  This is called (in the current kernel)
+ * sometime after booting when the 'ifconfig' program is run.
+ *
+ * This routine should set everything up anew at each open, even
+ * registers that "should" only need to be set once at boot, so that
+ * there is non-reboot way to recover if something goes wrong.
+ */
+static int
+etherh_open(struct net_device *dev)
+{
+	struct ei_device *ei_local = netdev_priv(dev);
+
+	if (!is_valid_ether_addr(dev->dev_addr)) {
+		printk(KERN_WARNING "%s: invalid ethernet MAC address\n",
+			dev->name);
+		return -EINVAL;
+	}
+
+	if (request_irq(dev->irq, ei_interrupt, 0, dev->name, dev))
+		return -EAGAIN;
+
+	/*
+	 * Make sure that we aren't going to change the
+	 * media type on the next reset - we are about to
+	 * do automedia manually now.
+	 */
+	ei_local->interface_num = 0;
+
+	/*
+	 * If we are doing automedia detection, do it now.
+	 * This is more reliable than the 8390's detection.
+	 */
+	if (dev->flags & IFF_AUTOMEDIA) {
+		dev->if_port = IF_PORT_10BASET;
+		etherh_setif(dev);
+		mdelay(1);
+		if (!etherh_getifstat(dev)) {
+			dev->if_port = IF_PORT_10BASE2;
+			etherh_setif(dev);
+		}
+	} else
+		etherh_setif(dev);
+
+	etherh_reset(dev);
+	ei_open(dev);
+
+	return 0;
+}
+
+/*
+ * The inverse routine to etherh_open().
+ */
+static int
+etherh_close(struct net_device *dev)
+{
+	ei_close (dev);
+	free_irq (dev->irq, dev);
+	return 0;
+}
+
+/*
+ * Initialisation
+ */
+
+static void __init etherh_banner(void)
+{
+	static int version_printed;
+
+	if (net_debug && version_printed++ == 0)
+		printk(KERN_INFO "%s", version);
+}
+
+/*
+ * Read the ethernet address string from the on board rom.
+ * This is an ascii string...
+ */
+static int __init etherh_addr(char *addr, struct expansion_card *ec)
+{
+	struct in_chunk_dir cd;
+	char *s;
+	
+	if (!ecard_readchunk(&cd, ec, 0xf5, 0)) {
+		printk(KERN_ERR "%s: unable to read podule description string\n",
+		       ec->dev.bus_id);
+		goto no_addr;
+	}
+
+	s = strchr(cd.d.string, '(');
+	if (s) {
+		int i;
+
+		for (i = 0; i < 6; i++) {
+			addr[i] = simple_strtoul(s + 1, &s, 0x10);
+			if (*s != (i == 5? ')' : ':'))
+				break;
+		}
+
+		if (i == 6)
+			return 0;
+	}
+
+	printk(KERN_ERR "%s: unable to parse MAC address: %s\n",
+	       ec->dev.bus_id, cd.d.string);
+
+ no_addr:
+	return -ENODEV;
+}
+
+/*
+ * Create an ethernet address from the system serial number.
+ */
+static int __init etherm_addr(char *addr)
+{
+	unsigned int serial;
+
+	if (system_serial_low == 0 && system_serial_high == 0)
+		return -ENODEV;
+
+	serial = system_serial_low | system_serial_high;
+
+	addr[0] = 0;
+	addr[1] = 0;
+	addr[2] = 0xa4;
+	addr[3] = 0x10 + (serial >> 24);
+	addr[4] = serial >> 16;
+	addr[5] = serial >> 8;
+	return 0;
+}
+
+static void etherh_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+	strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
+	strlcpy(info->version, DRV_VERSION, sizeof(info->version));
+	strlcpy(info->bus_info, dev->class_dev.dev->bus_id,
+		sizeof(info->bus_info));
+}
+
+static int etherh_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	cmd->supported	= etherh_priv(dev)->supported;
+	cmd->speed	= SPEED_10;
+	cmd->duplex	= DUPLEX_HALF;
+	cmd->port	= dev->if_port == IF_PORT_10BASET ? PORT_TP : PORT_BNC;
+	cmd->autoneg	= dev->flags & IFF_AUTOMEDIA ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+	return 0;
+}
+
+static int etherh_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	switch (cmd->autoneg) {
+	case AUTONEG_ENABLE:
+		dev->flags |= IFF_AUTOMEDIA;
+		break;
+
+	case AUTONEG_DISABLE:
+		switch (cmd->port) {
+		case PORT_TP:
+			dev->if_port = IF_PORT_10BASET;
+			break;
+
+		case PORT_BNC:
+			dev->if_port = IF_PORT_10BASE2;
+			break;
+
+		default:
+			return -EINVAL;
+		}
+		dev->flags &= ~IFF_AUTOMEDIA;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	etherh_setif(dev);
+
+	return 0;
+}
+
+static struct ethtool_ops etherh_ethtool_ops = {
+	.get_settings	= etherh_get_settings,
+	.set_settings	= etherh_set_settings,
+	.get_drvinfo	= etherh_get_drvinfo,
+};
+
+static u32 etherh_regoffsets[16];
+static u32 etherm_regoffsets[16];
+
+static int __init
+etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
+{
+	const struct etherh_data *data = id->data;
+	struct ei_device *ei_local;
+	struct net_device *dev;
+	struct etherh_priv *eh;
+	int i, ret;
+
+	etherh_banner();
+
+	ret = ecard_request_resources(ec);
+	if (ret)
+		goto out;
+
+	dev = __alloc_ei_netdev(sizeof(struct etherh_priv));
+	if (!dev) {
+		ret = -ENOMEM;
+		goto release;
+	}
+
+	SET_MODULE_OWNER(dev);
+	SET_NETDEV_DEV(dev, &ec->dev);
+
+	dev->open		= etherh_open;
+	dev->stop		= etherh_close;
+	dev->set_config		= etherh_set_config;
+	dev->irq		= ec->irq;
+	dev->ethtool_ops	= &etherh_ethtool_ops;
+
+	if (data->supported & SUPPORTED_Autoneg)
+		dev->flags |= IFF_AUTOMEDIA;
+	if (data->supported & SUPPORTED_TP) {
+		dev->flags |= IFF_PORTSEL;
+		dev->if_port = IF_PORT_10BASET;
+	} else if (data->supported & SUPPORTED_BNC) {
+		dev->flags |= IFF_PORTSEL;
+		dev->if_port = IF_PORT_10BASE2;
+	} else
+		dev->if_port = IF_PORT_UNKNOWN;
+
+	eh = etherh_priv(dev);
+	eh->supported		= data->supported;
+	eh->ctrl		= 0;
+	eh->id			= ec->cid.product;
+	eh->memc		= ioremap(ecard_resource_start(ec, ECARD_RES_MEMC), PAGE_SIZE);
+	if (!eh->memc) {
+		ret = -ENOMEM;
+		goto free;
+	}
+
+	eh->ctrl_port = eh->memc;
+	if (data->ctrl_ioc) {
+		eh->ioc_fast = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST), PAGE_SIZE);
+		if (!eh->ioc_fast) {
+			ret = -ENOMEM;
+			goto free;
+		}
+		eh->ctrl_port = eh->ioc_fast;
+	}
+
+	dev->base_addr = (unsigned long)eh->memc + data->ns8390_offset;
+	eh->dma_base = eh->memc + data->dataport_offset;
+	eh->ctrl_port += data->ctrlport_offset;
+
+	/*
+	 * IRQ and control port handling - only for non-NIC slot cards.
+	 */
+	if (ec->slot_no != 8) {
+		ec->ops		= &etherh_ops;
+		ec->irq_data	= eh;
+	} else {
+		/*
+		 * If we're in the NIC slot, make sure the IRQ is enabled
+		 */
+		etherh_set_ctrl(eh, ETHERH_CP_IE);
+	}
+
+	ei_local = netdev_priv(dev);
+	spin_lock_init(&ei_local->page_lock);
+
+	if (ec->cid.product == PROD_ANT_ETHERM) {
+		etherm_addr(dev->dev_addr);
+		ei_local->reg_offset = etherm_regoffsets;
+	} else {
+		etherh_addr(dev->dev_addr, ec);
+		ei_local->reg_offset = etherh_regoffsets;
+	}
+
+	ei_local->name          = dev->name;
+	ei_local->word16        = 1;
+	ei_local->tx_start_page = data->tx_start_page;
+	ei_local->rx_start_page = ei_local->tx_start_page + TX_PAGES;
+	ei_local->stop_page     = data->stop_page;
+	ei_local->reset_8390    = etherh_reset;
+	ei_local->block_input   = etherh_block_input;
+	ei_local->block_output  = etherh_block_output;
+	ei_local->get_8390_hdr  = etherh_get_header;
+	ei_local->interface_num = 0;
+
+	etherh_reset(dev);
+	NS8390_init(dev, 0);
+
+	ret = register_netdev(dev);
+	if (ret)
+		goto free;
+
+	printk(KERN_INFO "%s: %s in slot %d, ",
+		dev->name, data->name, ec->slot_no);
+
+	for (i = 0; i < 6; i++)
+		printk("%2.2x%c", dev->dev_addr[i], i == 5 ? '\n' : ':');
+
+	ecard_set_drvdata(ec, dev);
+
+	return 0;
+
+ free:
+	if (eh->ioc_fast)
+		iounmap(eh->ioc_fast);
+	if (eh->memc)
+		iounmap(eh->memc);
+	free_netdev(dev);
+ release:
+	ecard_release_resources(ec);
+ out:
+	return ret;
+}
+
+static void __devexit etherh_remove(struct expansion_card *ec)
+{
+	struct net_device *dev = ecard_get_drvdata(ec);
+	struct etherh_priv *eh = etherh_priv(dev);
+
+	ecard_set_drvdata(ec, NULL);
+
+	unregister_netdev(dev);
+	ec->ops = NULL;
+
+	if (eh->ioc_fast)
+		iounmap(eh->ioc_fast);
+	iounmap(eh->memc);
+
+	free_netdev(dev);
+
+	ecard_release_resources(ec);
+}
+
+static struct etherh_data etherm_data = {
+	.ns8390_offset		= ETHERM_NS8390,
+	.dataport_offset	= ETHERM_NS8390 + ETHERM_DATAPORT,
+	.ctrlport_offset	= ETHERM_NS8390 + ETHERM_CTRLPORT,
+	.name			= "ANT EtherM",
+	.supported		= SUPPORTED_10baseT_Half,
+	.tx_start_page		= ETHERM_TX_START_PAGE,
+	.stop_page		= ETHERM_STOP_PAGE,
+};
+
+static struct etherh_data etherlan500_data = {
+	.ns8390_offset		= ETHERH500_NS8390,
+	.dataport_offset	= ETHERH500_NS8390 + ETHERH500_DATAPORT,
+	.ctrlport_offset	= ETHERH500_CTRLPORT,
+	.ctrl_ioc		= 1,
+	.name			= "i3 EtherH 500",
+	.supported		= SUPPORTED_10baseT_Half,
+	.tx_start_page		= ETHERH_TX_START_PAGE,
+	.stop_page		= ETHERH_STOP_PAGE,
+};
+
+static struct etherh_data etherlan600_data = {
+	.ns8390_offset		= ETHERH600_NS8390,
+	.dataport_offset	= ETHERH600_NS8390 + ETHERH600_DATAPORT,
+	.ctrlport_offset	= ETHERH600_NS8390 + ETHERH600_CTRLPORT,
+	.name			= "i3 EtherH 600",
+	.supported		= SUPPORTED_10baseT_Half | SUPPORTED_TP | SUPPORTED_BNC | SUPPORTED_Autoneg,
+	.tx_start_page		= ETHERH_TX_START_PAGE,
+	.stop_page		= ETHERH_STOP_PAGE,
+};
+
+static struct etherh_data etherlan600a_data = {
+	.ns8390_offset		= ETHERH600_NS8390,
+	.dataport_offset	= ETHERH600_NS8390 + ETHERH600_DATAPORT,
+	.ctrlport_offset	= ETHERH600_NS8390 + ETHERH600_CTRLPORT,
+	.name			= "i3 EtherH 600A",
+	.supported		= SUPPORTED_10baseT_Half | SUPPORTED_TP | SUPPORTED_BNC | SUPPORTED_Autoneg,
+	.tx_start_page		= ETHERH_TX_START_PAGE,
+	.stop_page		= ETHERH_STOP_PAGE,
+};
+
+static const struct ecard_id etherh_ids[] = {
+	{ MANU_ANT, PROD_ANT_ETHERM,      &etherm_data       },
+	{ MANU_I3,  PROD_I3_ETHERLAN500,  &etherlan500_data  },
+	{ MANU_I3,  PROD_I3_ETHERLAN600,  &etherlan600_data  },
+	{ MANU_I3,  PROD_I3_ETHERLAN600A, &etherlan600a_data },
+	{ 0xffff,   0xffff }
+};
+
+static struct ecard_driver etherh_driver = {
+	.probe		= etherh_probe,
+	.remove		= __devexit_p(etherh_remove),
+	.id_table	= etherh_ids,
+	.drv = {
+		.name	= DRV_NAME,
+	},
+};
+
+static int __init etherh_init(void)
+{
+	int i;
+
+	for (i = 0; i < 16; i++) {
+		etherh_regoffsets[i] = i << 2;
+		etherm_regoffsets[i] = i << 5;
+	}
+
+	return ecard_register_driver(&etherh_driver);
+}
+
+static void __exit etherh_exit(void)
+{
+	ecard_remove_driver(&etherh_driver);
+}
+
+module_init(etherh_init);
+module_exit(etherh_exit);