summaryrefslogtreecommitdiff
path: root/drivers/net/arm
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/arm
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/net/arm')
-rw-r--r--drivers/net/arm/Kconfig46
-rw-r--r--drivers/net/arm/Makefile10
-rw-r--r--drivers/net/arm/am79c961a.c750
-rw-r--r--drivers/net/arm/am79c961a.h148
-rw-r--r--drivers/net/arm/ether00.c1017
-rw-r--r--drivers/net/arm/ether1.c1110
-rw-r--r--drivers/net/arm/ether1.h281
-rw-r--r--drivers/net/arm/ether3.c936
-rw-r--r--drivers/net/arm/ether3.h177
-rw-r--r--drivers/net/arm/etherh.c862
10 files changed, 5337 insertions, 0 deletions
diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
new file mode 100644
index 000000000000..470364deded0
--- /dev/null
+++ b/drivers/net/arm/Kconfig
@@ -0,0 +1,46 @@
+#
+# Acorn Network device configuration
+# These are for Acorn's Expansion card network interfaces
+#
+config ARM_AM79C961A
+ bool "ARM EBSA110 AM79C961A support"
+ depends on NET_ETHERNET && ARM && ARCH_EBSA110
+ select CRC32
+ help
+ If you wish to compile a kernel for the EBSA-110, then you should
+ always answer Y to this.
+
+config ARM_ETHER1
+ tristate "Acorn Ether1 support"
+ depends on NET_ETHERNET && ARM && ARCH_ACORN
+ help
+ If you have an Acorn system with one of these (AKA25) network cards,
+ you should say Y to this option if you wish to use it with Linux.
+
+config ARM_ETHER3
+ tristate "Acorn/ANT Ether3 support"
+ depends on NET_ETHERNET && ARM && ARCH_ACORN
+ help
+ If you have an Acorn system with one of these network cards, you
+ should say Y to this option if you wish to use it with Linux.
+
+config ARM_ETHERH
+ tristate "I-cubed EtherH/ANT EtherM support"
+ depends on NET_ETHERNET && ARM && ARCH_ACORN
+ select CRC32
+ help
+ If you have an Acorn system with one of these network cards, you
+ should say Y to this option if you wish to use it with Linux.
+
+config ARM_ETHER00
+ tristate "Altera Ether00 support"
+ depends on NET_ETHERNET && ARM && ARCH_CAMELOT
+ help
+ This is the driver for Altera's ether00 ethernet mac IP core. Say
+ Y here if you want to build support for this into the kernel. It
+ is also available as a module (say M here) that can be inserted/
+ removed from the kernel at the same time as the PLD is configured.
+ If this driver is running on an epxa10 development board then it
+ will generate a suitable hw address based on the board serial
+ number (MTD support is required for this). Otherwise you will
+ need to set a suitable hw address using ifconfig.
diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile
new file mode 100644
index 000000000000..b0d706834d89
--- /dev/null
+++ b/drivers/net/arm/Makefile
@@ -0,0 +1,10 @@
+# File: drivers/net/arm/Makefile
+#
+# Makefile for the ARM network device drivers
+#
+
+obj-$(CONFIG_ARM_AM79C961A) += am79c961a.o
+obj-$(CONFIG_ARM_ETHER00) += ether00.o
+obj-$(CONFIG_ARM_ETHERH) += etherh.o
+obj-$(CONFIG_ARM_ETHER3) += ether3.o
+obj-$(CONFIG_ARM_ETHER1) += ether1.o
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c
new file mode 100644
index 000000000000..9b659e3c8d67
--- /dev/null
+++ b/drivers/net/arm/am79c961a.c
@@ -0,0 +1,750 @@
+/*
+ * linux/drivers/net/am79c961.c
+ *
+ * by Russell King <rmk@arm.linux.org.uk> 1995-2001.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Derived from various things including skeleton.c
+ *
+ * This is a special driver for the am79c961A Lance chip used in the
+ * Intel (formally Digital Equipment Corp) EBSA110 platform. Please
+ * note that this can not be built as a module (it doesn't make sense).
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/crc32.h>
+#include <linux/bitops.h>
+
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+
+#define TX_BUFFERS 15
+#define RX_BUFFERS 25
+
+#include "am79c961a.h"
+
+static irqreturn_t
+am79c961_interrupt (int irq, void *dev_id, struct pt_regs *regs);
+
+static unsigned int net_debug = NET_DEBUG;
+
+static const char version[] =
+ "am79c961 ethernet driver (C) 1995-2001 Russell King v0.04\n";
+
+/* --------------------------------------------------------------------------- */
+
+#ifdef __arm__
+static void write_rreg(u_long base, u_int reg, u_int val)
+{
+ __asm__(
+ "str%?h %1, [%2] @ NET_RAP\n\t"
+ "str%?h %0, [%2, #-4] @ NET_RDP"
+ :
+ : "r" (val), "r" (reg), "r" (ISAIO_BASE + 0x0464));
+}
+
+static inline unsigned short read_rreg(u_long base_addr, u_int reg)
+{
+ unsigned short v;
+ __asm__(
+ "str%?h %1, [%2] @ NET_RAP\n\t"
+ "ldr%?h %0, [%2, #-4] @ NET_RDP"
+ : "=r" (v)
+ : "r" (reg), "r" (ISAIO_BASE + 0x0464));
+ return v;
+}
+
+static inline void write_ireg(u_long base, u_int reg, u_int val)
+{
+ __asm__(
+ "str%?h %1, [%2] @ NET_RAP\n\t"
+ "str%?h %0, [%2, #8] @ NET_IDP"
+ :
+ : "r" (val), "r" (reg), "r" (ISAIO_BASE + 0x0464));
+}
+
+static inline unsigned short read_ireg(u_long base_addr, u_int reg)
+{
+ u_short v;
+ __asm__(
+ "str%?h %1, [%2] @ NAT_RAP\n\t"
+ "str%?h %0, [%2, #8] @ NET_IDP\n\t"
+ : "=r" (v)
+ : "r" (reg), "r" (ISAIO_BASE + 0x0464));
+ return v;
+}
+
+#define am_writeword(dev,off,val) __raw_writew(val, ISAMEM_BASE + ((off) << 1))
+#define am_readword(dev,off) __raw_readw(ISAMEM_BASE + ((off) << 1))
+
+static inline void
+am_writebuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned int length)
+{
+ offset = ISAMEM_BASE + (offset << 1);
+ length = (length + 1) & ~1;
+ if ((int)buf & 2) {
+ __asm__ __volatile__("str%?h %2, [%0], #4"
+ : "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8)));
+ buf += 2;
+ length -= 2;
+ }
+ while (length > 8) {
+ unsigned int tmp, tmp2;
+ __asm__ __volatile__(
+ "ldm%?ia %1!, {%2, %3}\n\t"
+ "str%?h %2, [%0], #4\n\t"
+ "mov%? %2, %2, lsr #16\n\t"
+ "str%?h %2, [%0], #4\n\t"
+ "str%?h %3, [%0], #4\n\t"
+ "mov%? %3, %3, lsr #16\n\t"
+ "str%?h %3, [%0], #4"
+ : "=&r" (offset), "=&r" (buf), "=r" (tmp), "=r" (tmp2)
+ : "0" (offset), "1" (buf));
+ length -= 8;
+ }
+ while (length > 0) {
+ __asm__ __volatile__("str%?h %2, [%0], #4"
+ : "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8)));
+ buf += 2;
+ length -= 2;
+ }
+}
+
+static inline void
+am_readbuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned int length)
+{
+ offset = ISAMEM_BASE + (offset << 1);
+ length = (length + 1) & ~1;
+ if ((int)buf & 2) {
+ unsigned int tmp;
+ __asm__ __volatile__(
+ "ldr%?h %2, [%0], #4\n\t"
+ "str%?b %2, [%1], #1\n\t"
+ "mov%? %2, %2, lsr #8\n\t"
+ "str%?b %2, [%1], #1"
+ : "=&r" (offset), "=&r" (buf), "=r" (tmp): "0" (offset), "1" (buf));
+ length -= 2;
+ }
+ while (length > 8) {
+ unsigned int tmp, tmp2, tmp3;
+ __asm__ __volatile__(
+ "ldr%?h %2, [%0], #4\n\t"
+ "ldr%?h %3, [%0], #4\n\t"
+ "orr%? %2, %2, %3, lsl #16\n\t"
+ "ldr%?h %3, [%0], #4\n\t"
+ "ldr%?h %4, [%0], #4\n\t"
+ "orr%? %3, %3, %4, lsl #16\n\t"
+ "stm%?ia %1!, {%2, %3}"
+ : "=&r" (offset), "=&r" (buf), "=r" (tmp), "=r" (tmp2), "=r" (tmp3)
+ : "0" (offset), "1" (buf));
+ length -= 8;
+ }
+ while (length > 0) {
+ unsigned int tmp;
+ __asm__ __volatile__(
+ "ldr%?h %2, [%0], #4\n\t"
+ "str%?b %2, [%1], #1\n\t"
+ "mov%? %2, %2, lsr #8\n\t"
+ "str%?b %2, [%1], #1"
+ : "=&r" (offset), "=&r" (buf), "=r" (tmp) : "0" (offset), "1" (buf));
+ length -= 2;
+ }
+}
+#else
+#error Not compatible
+#endif
+
+static int
+am79c961_ramtest(struct net_device *dev, unsigned int val)
+{
+ unsigned char *buffer = kmalloc (65536, GFP_KERNEL);
+ int i, error = 0, errorcount = 0;
+
+ if (!buffer)
+ return 0;
+ memset (buffer, val, 65536);
+ am_writebuffer(dev, 0, buffer, 65536);
+ memset (buffer, val ^ 255, 65536);
+ am_readbuffer(dev, 0, buffer, 65536);
+ for (i = 0; i < 65536; i++) {
+ if (buffer[i] != val && !error) {
+ printk ("%s: buffer error (%02X %02X) %05X - ", dev->name, val, buffer[i], i);
+ error = 1;
+ errorcount ++;
+ } else if (error && buffer[i] == val) {
+ printk ("%05X\n", i);
+ error = 0;
+ }
+ }
+ if (error)
+ printk ("10000\n");
+ kfree (buffer);
+ return errorcount;
+}
+
+static void
+am79c961_init_for_open(struct net_device *dev)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ unsigned long flags;
+ unsigned char *p;
+ u_int hdr_addr, first_free_addr;
+ int i;
+
+ /*
+ * Stop the chip.
+ */
+ spin_lock_irqsave(priv->chip_lock, flags);
+ write_rreg (dev->base_addr, CSR0, CSR0_BABL|CSR0_CERR|CSR0_MISS|CSR0_MERR|CSR0_TINT|CSR0_RINT|CSR0_STOP);
+ spin_unlock_irqrestore(priv->chip_lock, flags);
+
+ write_ireg (dev->base_addr, 5, 0x00a0); /* Receive address LED */
+ write_ireg (dev->base_addr, 6, 0x0081); /* Collision LED */
+ write_ireg (dev->base_addr, 7, 0x0090); /* XMIT LED */
+ write_ireg (dev->base_addr, 2, 0x0000); /* MODE register selects media */
+
+ for (i = LADRL; i <= LADRH; i++)
+ write_rreg (dev->base_addr, i, 0);
+
+ for (i = PADRL, p = dev->dev_addr; i <= PADRH; i++, p += 2)
+ write_rreg (dev->base_addr, i, p[0] | (p[1] << 8));
+
+ i = MODE_PORT_10BT;
+ if (dev->flags & IFF_PROMISC)
+ i |= MODE_PROMISC;
+
+ write_rreg (dev->base_addr, MODE, i);
+ write_rreg (dev->base_addr, POLLINT, 0);
+ write_rreg (dev->base_addr, SIZERXR, -RX_BUFFERS);
+ write_rreg (dev->base_addr, SIZETXR, -TX_BUFFERS);
+
+ first_free_addr = RX_BUFFERS * 8 + TX_BUFFERS * 8 + 16;
+ hdr_addr = 0;
+
+ priv->rxhead = 0;
+ priv->rxtail = 0;
+ priv->rxhdr = hdr_addr;
+
+ for (i = 0; i < RX_BUFFERS; i++) {
+ priv->rxbuffer[i] = first_free_addr;
+ am_writeword (dev, hdr_addr, first_free_addr);
+ am_writeword (dev, hdr_addr + 2, RMD_OWN);
+ am_writeword (dev, hdr_addr + 4, (-1600));
+ am_writeword (dev, hdr_addr + 6, 0);
+ first_free_addr += 1600;
+ hdr_addr += 8;
+ }
+ priv->txhead = 0;
+ priv->txtail = 0;
+ priv->txhdr = hdr_addr;
+ for (i = 0; i < TX_BUFFERS; i++) {
+ priv->txbuffer[i] = first_free_addr;
+ am_writeword (dev, hdr_addr, first_free_addr);
+ am_writeword (dev, hdr_addr + 2, TMD_STP|TMD_ENP);
+ am_writeword (dev, hdr_addr + 4, 0xf000);
+ am_writeword (dev, hdr_addr + 6, 0);
+ first_free_addr += 1600;
+ hdr_addr += 8;
+ }
+
+ write_rreg (dev->base_addr, BASERXL, priv->rxhdr);
+ write_rreg (dev->base_addr, BASERXH, 0);
+ write_rreg (dev->base_addr, BASETXL, priv->txhdr);
+ write_rreg (dev->base_addr, BASERXH, 0);
+ write_rreg (dev->base_addr, CSR0, CSR0_STOP);
+ write_rreg (dev->base_addr, CSR3, CSR3_IDONM|CSR3_BABLM|CSR3_DXSUFLO);
+ write_rreg (dev->base_addr, CSR4, CSR4_APAD_XMIT|CSR4_MFCOM|CSR4_RCVCCOM|CSR4_TXSTRTM|CSR4_JABM);
+ write_rreg (dev->base_addr, CSR0, CSR0_IENA|CSR0_STRT);
+}
+
+static void am79c961_timer(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *)data;
+ struct dev_priv *priv = netdev_priv(dev);
+ unsigned int lnkstat, carrier;
+
+ lnkstat = read_ireg(dev->base_addr, ISALED0) & ISALED0_LNKST;
+ carrier = netif_carrier_ok(dev);
+
+ if (lnkstat && !carrier)
+ netif_carrier_on(dev);
+ else if (!lnkstat && carrier)
+ netif_carrier_off(dev);
+
+ mod_timer(&priv->timer, jiffies + 5*HZ);
+}
+
+/*
+ * Open/initialize the board.
+ */
+static int
+am79c961_open(struct net_device *dev)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ int ret;
+
+ memset (&priv->stats, 0, sizeof (priv->stats));
+
+ ret = request_irq(dev->irq, am79c961_interrupt, 0, dev->name, dev);
+ if (ret)
+ return ret;
+
+ am79c961_init_for_open(dev);
+
+ netif_carrier_off(dev);
+
+ priv->timer.expires = jiffies;
+ add_timer(&priv->timer);
+
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+/*
+ * The inverse routine to am79c961_open().
+ */
+static int
+am79c961_close(struct net_device *dev)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ unsigned long flags;
+
+ del_timer_sync(&priv->timer);
+
+ netif_stop_queue(dev);
+ netif_carrier_off(dev);
+
+ spin_lock_irqsave(priv->chip_lock, flags);
+ write_rreg (dev->base_addr, CSR0, CSR0_STOP);
+ write_rreg (dev->base_addr, CSR3, CSR3_MASKALL);
+ spin_unlock_irqrestore(priv->chip_lock, flags);
+
+ free_irq (dev->irq, dev);
+
+ return 0;
+}
+
+/*
+ * Get the current statistics.
+ */
+static struct net_device_stats *am79c961_getstats (struct net_device *dev)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ return &priv->stats;
+}
+
+static void am79c961_mc_hash(struct dev_mc_list *dmi, unsigned short *hash)
+{
+ if (dmi->dmi_addrlen == ETH_ALEN && dmi->dmi_addr[0] & 0x01) {
+ int idx, bit;
+ u32 crc;
+
+ crc = ether_crc_le(ETH_ALEN, dmi->dmi_addr);
+
+ idx = crc >> 30;
+ bit = (crc >> 26) & 15;
+
+ hash[idx] |= 1 << bit;
+ }
+}
+
+/*
+ * Set or clear promiscuous/multicast mode filter for this adapter.
+ */
+static void am79c961_setmulticastlist (struct net_device *dev)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ unsigned long flags;
+ unsigned short multi_hash[4], mode;
+ int i, stopped;
+
+ mode = MODE_PORT_10BT;
+
+ if (dev->flags & IFF_PROMISC) {
+ mode |= MODE_PROMISC;
+ } else if (dev->flags & IFF_ALLMULTI) {
+ memset(multi_hash, 0xff, sizeof(multi_hash));
+ } else {
+ struct dev_mc_list *dmi;
+
+ memset(multi_hash, 0x00, sizeof(multi_hash));
+
+ for (dmi = dev->mc_list; dmi; dmi = dmi->next)
+ am79c961_mc_hash(dmi, multi_hash);
+ }
+
+ spin_lock_irqsave(priv->chip_lock, flags);
+
+ stopped = read_rreg(dev->base_addr, CSR0) & CSR0_STOP;
+
+ if (!stopped) {
+ /*
+ * Put the chip into suspend mode
+ */
+ write_rreg(dev->base_addr, CTRL1, CTRL1_SPND);
+
+ /*
+ * Spin waiting for chip to report suspend mode
+ */
+ while ((read_rreg(dev->base_addr, CTRL1) & CTRL1_SPND) == 0) {
+ spin_unlock_irqrestore(priv->chip_lock, flags);
+ nop();
+ spin_lock_irqsave(priv->chip_lock, flags);
+ }
+ }
+
+ /*
+ * Update the multicast hash table
+ */
+ for (i = 0; i < sizeof(multi_hash) / sizeof(multi_hash[0]); i++)
+ write_rreg(dev->base_addr, i + LADRL, multi_hash[i]);
+
+ /*
+ * Write the mode register
+ */
+ write_rreg(dev->base_addr, MODE, mode);
+
+ if (!stopped) {
+ /*
+ * Put the chip back into running mode
+ */
+ write_rreg(dev->base_addr, CTRL1, 0);
+ }
+
+ spin_unlock_irqrestore(priv->chip_lock, flags);
+}
+
+static void am79c961_timeout(struct net_device *dev)
+{
+ printk(KERN_WARNING "%s: transmit timed out, network cable problem?\n",
+ dev->name);
+
+ /*
+ * ought to do some setup of the tx side here
+ */
+
+ netif_wake_queue(dev);
+}
+
+/*
+ * Transmit a packet
+ */
+static int
+am79c961_sendpacket(struct sk_buff *skb, struct net_device *dev)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+ unsigned int hdraddr, bufaddr;
+ unsigned int head;
+ unsigned long flags;
+
+ head = priv->txhead;
+ hdraddr = priv->txhdr + (head << 3);
+ bufaddr = priv->txbuffer[head];
+ head += 1;
+ if (head >= TX_BUFFERS)
+ head = 0;
+
+ am_writebuffer (dev, bufaddr, skb->data, skb->len);
+ am_writeword (dev, hdraddr + 4, -skb->len);
+ am_writeword (dev, hdraddr + 2, TMD_OWN|TMD_STP|TMD_ENP);
+ priv->txhead = head;
+
+ spin_lock_irqsave(priv->chip_lock, flags);
+ write_rreg (dev->base_addr, CSR0, CSR0_TDMD|CSR0_IENA);
+ dev->trans_start = jiffies;
+ spin_unlock_irqrestore(priv->chip_lock, flags);
+
+ /*
+ * If the next packet is owned by the ethernet device,
+ * then the tx ring is full and we can't add another
+ * packet.
+ */
+ if (am_readword(dev, priv->txhdr + (priv->txhead << 3) + 2) & TMD_OWN)
+ netif_stop_queue(dev);
+
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+/*
+ * If we have a good packet(s), get it/them out of the buffers.
+ */
+static void
+am79c961_rx(struct net_device *dev, struct dev_priv *priv)
+{
+ do {
+ struct sk_buff *skb;
+ u_int hdraddr;
+ u_int pktaddr;
+ u_int status;
+ int len;
+
+ hdraddr = priv->rxhdr + (priv->rxtail << 3);
+ pktaddr = priv->rxbuffer[priv->rxtail];
+
+ status = am_readword (dev, hdraddr + 2);
+ if (status & RMD_OWN) /* do we own it? */
+ break;
+
+ priv->rxtail ++;
+ if (priv->rxtail >= RX_BUFFERS)
+ priv->rxtail = 0;
+
+ if ((status & (RMD_ERR|RMD_STP|RMD_ENP)) != (RMD_STP|RMD_ENP)) {
+ am_writeword (dev, hdraddr + 2, RMD_OWN);
+ priv->stats.rx_errors ++;
+ if (status & RMD_ERR) {
+ if (status & RMD_FRAM)
+ priv->stats.rx_frame_errors ++;
+ if (status & RMD_CRC)
+ priv->stats.rx_crc_errors ++;
+ } else if (status & RMD_STP)
+ priv->stats.rx_length_errors ++;
+ continue;
+ }
+
+ len = am_readword(dev, hdraddr + 6);
+ skb = dev_alloc_skb(len + 2);
+
+ if (skb) {
+ skb->dev = dev;
+ skb_reserve(skb, 2);
+
+ am_readbuffer(dev, pktaddr, skb_put(skb, len), len);
+ am_writeword(dev, hdraddr + 2, RMD_OWN);
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+ dev->last_rx = jiffies;
+ priv->stats.rx_bytes += len;
+ priv->stats.rx_packets ++;
+ } else {
+ am_writeword (dev, hdraddr + 2, RMD_OWN);
+ printk (KERN_WARNING "%s: memory squeeze, dropping packet.\n", dev->name);
+ priv->stats.rx_dropped ++;
+ break;
+ }
+ } while (1);
+}
+
+/*
+ * Update stats for the transmitted packet
+ */
+static void
+am79c961_tx(struct net_device *dev, struct dev_priv *priv)
+{
+ do {
+ short len;
+ u_int hdraddr;
+ u_int status;
+
+ hdraddr = priv->txhdr + (priv->txtail << 3);
+ status = am_readword (dev, hdraddr + 2);
+ if (status & TMD_OWN)
+ break;
+
+ priv->txtail ++;
+ if (priv->txtail >= TX_BUFFERS)
+ priv->txtail = 0;
+
+ if (status & TMD_ERR) {
+ u_int status2;
+
+ priv->stats.tx_errors ++;
+
+ status2 = am_readword (dev, hdraddr + 6);
+
+ /*
+ * Clear the error byte
+ */
+ am_writeword (dev, hdraddr + 6, 0);
+
+ if (status2 & TST_RTRY)
+ priv->stats.collisions += 16;
+ if (status2 & TST_LCOL)
+ priv->stats.tx_window_errors ++;
+ if (status2 & TST_LCAR)
+ priv->stats.tx_carrier_errors ++;
+ if (status2 & TST_UFLO)
+ priv->stats.tx_fifo_errors ++;
+ continue;
+ }
+ priv->stats.tx_packets ++;
+ len = am_readword (dev, hdraddr + 4);
+ priv->stats.tx_bytes += -len;
+ } while (priv->txtail != priv->txhead);
+
+ netif_wake_queue(dev);
+}
+
+static irqreturn_t
+am79c961_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *)dev_id;
+ struct dev_priv *priv = netdev_priv(dev);
+ u_int status, n = 100;
+ int handled = 0;
+
+ do {
+ status = read_rreg(dev->base_addr, CSR0);
+ write_rreg(dev->base_addr, CSR0, status &
+ (CSR0_IENA|CSR0_TINT|CSR0_RINT|
+ CSR0_MERR|CSR0_MISS|CSR0_CERR|CSR0_BABL));
+
+ if (status & CSR0_RINT) {
+ handled = 1;
+ am79c961_rx(dev, priv);
+ }
+ if (status & CSR0_TINT) {
+ handled = 1;
+ am79c961_tx(dev, priv);
+ }
+ if (status & CSR0_MISS) {
+ handled = 1;
+ priv->stats.rx_dropped ++;
+ }
+ if (status & CSR0_CERR) {
+ handled = 1;
+ mod_timer(&priv->timer, jiffies);
+ }
+ } while (--n && status & (CSR0_RINT | CSR0_TINT));
+
+ return IRQ_RETVAL(handled);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void am79c961_poll_controller(struct net_device *dev)
+{
+ unsigned long flags;
+ local_irq_save(flags);
+ am79c961_interrupt(dev->irq, dev, NULL);
+ local_irq_restore(flags);
+}
+#endif
+
+/*
+ * Initialise the chip. Note that we always expect
+ * to be entered with interrupts enabled.
+ */
+static int
+am79c961_hw_init(struct net_device *dev)
+{
+ struct dev_priv *priv = netdev_priv(dev);
+
+ spin_lock_irq(&priv->chip_lock);
+ write_rreg (dev->base_addr, CSR0, CSR0_STOP);
+ write_rreg (dev->base_addr, CSR3, CSR3_MASKALL);
+ spin_unlock_irq(&priv->chip_lock);
+
+ am79c961_ramtest(dev, 0x66);
+ am79c961_ramtest(dev, 0x99);
+
+ return 0;
+}
+
+static void __init am79c961_banner(void)
+{
+ static unsigned version_printed;
+
+ if (net_debug && version_printed++ == 0)
+ printk(KERN_INFO "%s", version);
+}
+
+static int __init am79c961_init(void)
+{
+ struct net_device *dev;
+ struct dev_priv *priv;
+ int i, ret;
+
+ dev = alloc_etherdev(sizeof(struct dev_priv));
+ ret = -ENOMEM;
+ if (!dev)
+ goto out;
+
+ priv = netdev_priv(dev);
+
+ /*
+ * Fixed address and IRQ lines here.
+ * The PNP initialisation should have been
+ * done by the ether bootp loader.
+ */
+ dev->base_addr = 0x220;
+ dev->irq = IRQ_EBSA110_ETHERNET;
+
+ ret = -ENODEV;
+ if (!request_region(dev->base_addr, 0x18, dev->name))
+ goto nodev;
+
+ /*
+ * Reset the device.
+ */
+ inb(dev->base_addr + NET_RESET);
+ udelay(5);
+
+ /*
+ * Check the manufacturer part of the
+ * ether address.
+ */
+ if (inb(dev->base_addr) != 0x08 ||
+ inb(dev->base_addr + 2) != 0x00 ||
+ inb(dev->base_addr + 4) != 0x2b)
+ goto release;
+
+ am79c961_banner();
+ printk(KERN_INFO "%s: ether address ", dev->name);
+
+ /* Retrive and print the ethernet address. */
+ for (i = 0; i < 6; i++) {
+ dev->dev_addr[i] = inb(dev->base_addr + i * 2) & 0xff;
+ printk (i == 5 ? "%02x\n" : "%02x:", dev->dev_addr[i]);
+ }
+
+ spin_lock_init(&priv->chip_lock);
+ init_timer(&priv->timer);
+ priv->timer.data = (unsigned long)dev;
+ priv->timer.function = am79c961_timer;
+
+ if (am79c961_hw_init(dev))
+ goto release;
+
+ dev->open = am79c961_open;
+ dev->stop = am79c961_close;
+ dev->hard_start_xmit = am79c961_sendpacket;
+ dev->get_stats = am79c961_getstats;
+ dev->set_multicast_list = am79c961_setmulticastlist;
+ dev->tx_timeout = am79c961_timeout;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = am79c961_poll_controller;
+#endif
+
+ ret = register_netdev(dev);
+ if (ret == 0)
+ return 0;
+
+release:
+ release_region(dev->base_addr, 0x18);
+nodev:
+ free_netdev(dev);
+out:
+ return ret;
+}
+
+__initcall(am79c961_init);
diff --git a/drivers/net/arm/am79c961a.h b/drivers/net/arm/am79c961a.h
new file mode 100644
index 000000000000..1e9b05050cbe
--- /dev/null
+++ b/drivers/net/arm/am79c961a.h
@@ -0,0 +1,148 @@
+/*
+ * linux/drivers/net/am79c961.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _LINUX_am79c961a_H
+#define _LINUX_am79c961a_H
+
+/* use 0 for production, 1 for verification, >2 for debug. debug flags: */
+#define DEBUG_TX 2
+#define DEBUG_RX 4
+#define DEBUG_INT 8
+#define DEBUG_IC 16
+#ifndef NET_DEBUG
+#define NET_DEBUG 0
+#endif
+
+#define NET_UID 0
+#define NET_RDP 0x10
+#define NET_RAP 0x12
+#define NET_RESET 0x14
+#define NET_IDP 0x16
+
+/*
+ * RAP registers
+ */
+#define CSR0 0
+#define CSR0_INIT 0x0001
+#define CSR0_STRT 0x0002
+#define CSR0_STOP 0x0004
+#define CSR0_TDMD 0x0008
+#define CSR0_TXON 0x0010
+#define CSR0_RXON 0x0020
+#define CSR0_IENA 0x0040
+#define CSR0_INTR 0x0080
+#define CSR0_IDON 0x0100
+#define CSR0_TINT 0x0200
+#define CSR0_RINT 0x0400
+#define CSR0_MERR 0x0800
+#define CSR0_MISS 0x1000
+#define CSR0_CERR 0x2000
+#define CSR0_BABL 0x4000
+#define CSR0_ERR 0x8000
+
+#define CSR3 3
+#define CSR3_EMBA 0x0008
+#define CSR3_DXMT2PD 0x0010
+#define CSR3_LAPPEN 0x0020
+#define CSR3_DXSUFLO 0x0040
+#define CSR3_IDONM 0x0100
+#define CSR3_TINTM 0x0200
+#define CSR3_RINTM 0x0400
+#define CSR3_MERRM 0x0800
+#define CSR3_MISSM 0x1000
+#define CSR3_BABLM 0x4000
+#define CSR3_MASKALL 0x5F00
+
+#define CSR4 4
+#define CSR4_JABM 0x0001
+#define CSR4_JAB 0x0002
+#define CSR4_TXSTRTM 0x0004
+#define CSR4_TXSTRT 0x0008
+#define CSR4_RCVCCOM 0x0010
+#define CSR4_RCVCCO 0x0020
+#define CSR4_MFCOM 0x0100
+#define CSR4_MFCO 0x0200
+#define CSR4_ASTRP_RCV 0x0400
+#define CSR4_APAD_XMIT 0x0800
+
+#define CTRL1 5
+#define CTRL1_SPND 0x0001
+
+#define LADRL 8
+#define LADRM1 9
+#define LADRM2 10
+#define LADRH 11
+#define PADRL 12
+#define PADRM 13
+#define PADRH 14
+
+#define MODE 15
+#define MODE_DISRX 0x0001
+#define MODE_DISTX 0x0002
+#define MODE_LOOP 0x0004
+#define MODE_DTCRC 0x0008
+#define MODE_COLL 0x0010
+#define MODE_DRETRY 0x0020
+#define MODE_INTLOOP 0x0040
+#define MODE_PORT_AUI 0x0000
+#define MODE_PORT_10BT 0x0080
+#define MODE_DRXPA 0x2000
+#define MODE_DRXBA 0x4000
+#define MODE_PROMISC 0x8000
+
+#define BASERXL 24
+#define BASERXH 25
+#define BASETXL 30
+#define BASETXH 31
+
+#define POLLINT 47
+
+#define SIZERXR 76
+#define SIZETXR 78
+
+#define CSR_MFC 112
+
+#define RMD_ENP 0x0100
+#define RMD_STP 0x0200
+#define RMD_CRC 0x0800
+#define RMD_FRAM 0x2000
+#define RMD_ERR 0x4000
+#define RMD_OWN 0x8000
+
+#define TMD_ENP 0x0100
+#define TMD_STP 0x0200
+#define TMD_MORE 0x1000
+#define TMD_ERR 0x4000
+#define TMD_OWN 0x8000
+
+#define TST_RTRY 0x0400
+#define TST_LCAR 0x0800
+#define TST_LCOL 0x1000
+#define TST_UFLO 0x4000
+#define TST_BUFF 0x8000
+
+#define ISALED0 0x0004
+#define ISALED0_LNKST 0x8000
+
+struct dev_priv {
+ struct net_device_stats stats;
+ unsigned long rxbuffer[RX_BUFFERS];
+ unsigned long txbuffer[TX_BUFFERS];
+ unsigned char txhead;
+ unsigned char txtail;
+ unsigned char rxhead;
+ unsigned char rxtail;
+ unsigned long rxhdr;
+ unsigned long txhdr;
+ spinlock_t chip_lock;
+ struct timer_list timer;
+};
+
+extern int am79c961_probe (struct net_device *dev);
+
+#endif
diff --git a/drivers/net/arm/ether00.c b/drivers/net/arm/ether00.c
new file mode 100644
index 000000000000..4f1f4e31bda5
--- /dev/null
+++ b/drivers/net/arm/ether00.c
@@ -0,0 +1,1017 @@
+/*
+ * drivers/net/ether00.c
+ *
+ * Copyright (C) 2001 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* includes */
+#include <linux/config.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/etherdevice.h>
+#include <linux/module.h>
+#include <linux/tqueue.h>
+#include <linux/mtd/mtd.h>
+#include <linux/pld/pld_hotswap.h>
+#include <asm/arch/excalibur.h>
+#include <asm/arch/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/sizes.h>
+
+#include <asm/arch/ether00.h>
+#include <asm/arch/tdkphy.h>
+
+
+MODULE_AUTHOR("Clive Davies");
+MODULE_DESCRIPTION("Altera Ether00 IP core driver");
+MODULE_LICENSE("GPL");
+
+#define PKT_BUF_SZ 1540 /* Size of each rx buffer */
+#define ETH_NR 4 /* Number of MACs this driver supports */
+
+#define DEBUG(x)
+
+#define __dma_va(x) (unsigned int)((unsigned int)priv->dma_data+(((unsigned int)(x))&(EXC_SPSRAM_BLOCK0_SIZE-1)))
+#define __dma_pa(x) (unsigned int)(EXC_SPSRAM_BLOCK0_BASE+(((unsigned int)(x))-(unsigned int)priv->dma_data))
+
+#define ETHER00_BASE 0
+#define ETHER00_TYPE
+#define ETHER00_NAME "ether00"
+#define MAC_REG_SIZE 0x400 /* size of MAC register area */
+
+
+
+/* typedefs */
+
+/* The definition of the driver control structure */
+
+#define RX_NUM_BUFF 10
+#define RX_NUM_FDESC 10
+#define TX_NUM_FDESC 10
+
+struct tx_fda_ent{
+ FDA_DESC fd;
+ BUF_DESC bd;
+ BUF_DESC pad;
+};
+struct rx_fda_ent{
+ FDA_DESC fd;
+ BUF_DESC bd;
+ BUF_DESC pad;
+};
+struct rx_blist_ent{
+ FDA_DESC fd;
+ BUF_DESC bd;
+ BUF_DESC pad;
+};
+struct net_priv
+{
+ struct net_device_stats stats;
+ struct sk_buff* skb;
+ void* dma_data;
+ struct rx_blist_ent* rx_blist_vp;
+ struct rx_fda_ent* rx_fda_ptr;
+ struct tx_fda_ent* tx_fdalist_vp;
+ struct tq_struct tq_memupdate;
+ unsigned char memupdate_scheduled;
+ unsigned char rx_disabled;
+ unsigned char queue_stopped;
+ spinlock_t rx_lock;
+};
+
+static const char vendor_id[2]={0x07,0xed};
+
+#ifdef ETHER00_DEBUG
+
+/* Dump (most) registers for debugging puposes */
+
+static void dump_regs(struct net_device *dev){
+ struct net_priv* priv=dev->priv;
+ unsigned int* i;
+
+ printk("\n RX free descriptor area:\n");
+
+ for(i=(unsigned int*)priv->rx_fda_ptr;
+ i<((unsigned int*)(priv->rx_fda_ptr+RX_NUM_FDESC));){
+ printk("%#8x %#8x %#8x %#8x\n",*i,*(i+1),*(i+2),*(i+3));
+ i+=4;
+ }
+
+ printk("\n RX buffer list:\n");
+
+ for(i=(unsigned int*)priv->rx_blist_vp;
+ i<((unsigned int*)(priv->rx_blist_vp+RX_NUM_BUFF));){
+ printk("%#8x %#8x %#8x %#8x\n",*i,*(i+1),*(i+2),*(i+3));
+ i+=4;
+ }
+
+ printk("\n TX frame descriptor list:\n");
+
+ for(i=(unsigned int*)priv->tx_fdalist_vp;
+ i<((unsigned int*)(priv->tx_fdalist_vp+TX_NUM_FDESC));){
+ printk("%#8x %#8x %#8x %#8x\n",*i,*(i+1),*(i+2),*(i+3));
+ i+=4;
+ }
+
+ printk("\ndma ctl=%#x\n",readw(ETHER_DMA_CTL(dev->base_addr)));
+ printk("txfrmptr=%#x\n",readw(ETHER_TXFRMPTR(dev->base_addr)));
+ printk("txthrsh=%#x\n",readw(ETHER_TXTHRSH(dev->base_addr)));
+ printk("txpollctr=%#x\n",readw(ETHER_TXPOLLCTR(dev->base_addr)));
+ printk("blfrmptr=%#x\n",readw(ETHER_BLFRMPTR(dev->base_addr)));
+ printk("rxfragsize=%#x\n",readw(ETHER_RXFRAGSIZE(dev->base_addr)));
+ printk("tx_int_en=%#x\n",readw(ETHER_INT_EN(dev->base_addr)));
+ printk("fda_bas=%#x\n",readw(ETHER_FDA_BAS(dev->base_addr)));
+ printk("fda_lim=%#x\n",readw(ETHER_FDA_LIM(dev->base_addr)));
+ printk("int_src=%#x\n",readw(ETHER_INT_SRC(dev->base_addr)));
+ printk("pausecnt=%#x\n",readw(ETHER_PAUSECNT(dev->base_addr)));
+ printk("rempaucnt=%#x\n",readw(ETHER_REMPAUCNT(dev->base_addr)));
+ printk("txconfrmstat=%#x\n",readw(ETHER_TXCONFRMSTAT(dev->base_addr)));
+ printk("mac_ctl=%#x\n",readw(ETHER_MAC_CTL(dev->base_addr)));
+ printk("arc_ctl=%#x\n",readw(ETHER_ARC_CTL(dev->base_addr)));
+ printk("tx_ctl=%#x\n",readw(ETHER_TX_CTL(dev->base_addr)));
+}
+#endif /* ETHER00_DEBUG */
+
+
+static int ether00_write_phy(struct net_device *dev, short address, short value)
+{
+ volatile int count = 1024;
+ writew(value,ETHER_MD_DATA(dev->base_addr));
+ writew( ETHER_MD_CA_BUSY_MSK |
+ ETHER_MD_CA_WR_MSK |
+ (address & ETHER_MD_CA_ADDR_MSK),
+ ETHER_MD_CA(dev->base_addr));
+
+ /* Wait for the command to complete */
+ while((readw(ETHER_MD_CA(dev->base_addr)) & ETHER_MD_CA_BUSY_MSK)&&count){
+ count--;
+ }
+ if (!count){
+ printk("Write to phy failed, addr=%#x, data=%#x\n",address, value);
+ return -EIO;
+ }
+ return 0;
+}
+
+static int ether00_read_phy(struct net_device *dev, short address)
+{
+ volatile int count = 1024;
+ writew( ETHER_MD_CA_BUSY_MSK |
+ (address & ETHER_MD_CA_ADDR_MSK),
+ ETHER_MD_CA(dev->base_addr));
+
+ /* Wait for the command to complete */
+ while((readw(ETHER_MD_CA(dev->base_addr)) & ETHER_MD_CA_BUSY_MSK)&&count){
+ count--;
+ }
+ if (!count){
+ printk(KERN_WARNING "Read from phy timed out\n");
+ return -EIO;
+ }
+ return readw(ETHER_MD_DATA(dev->base_addr));
+}
+
+static void ether00_phy_int(int irq_num, void* dev_id, struct pt_regs* regs)
+{
+ struct net_device* dev=dev_id;
+ int irq_status;
+
+ irq_status=ether00_read_phy(dev, PHY_IRQ_CONTROL);
+
+ if(irq_status & PHY_IRQ_CONTROL_ANEG_COMP_INT_MSK){
+ /*
+ * Autonegotiation complete on epxa10db. The mac doesn't
+ * twig if we're in full duplex so we need to check the
+ * phy status register and configure the mac accordingly
+ */
+ if(ether00_read_phy(dev, PHY_STATUS)&(PHY_STATUS_10T_F_MSK|PHY_STATUS_100_X_F_MSK)){
+ int tmp;
+ tmp=readl(ETHER_MAC_CTL(dev->base_addr));
+ writel(tmp|ETHER_MAC_CTL_FULLDUP_MSK,ETHER_MAC_CTL(dev->base_addr));
+ }
+ }
+
+ if(irq_status&PHY_IRQ_CONTROL_LS_CHG_INT_MSK){
+
+ if(ether00_read_phy(dev, PHY_STATUS)& PHY_STATUS_LINK_MSK){
+ /* Link is up */
+ netif_carrier_on(dev);
+ //printk("Carrier on\n");
+ }else{
+ netif_carrier_off(dev);
+ //printk("Carrier off\n");
+
+ }
+ }
+
+}
+
+static void setup_blist_entry(struct sk_buff* skb,struct rx_blist_ent* blist_ent_ptr){
+ /* Make the buffer consistent with the cache as the mac is going to write
+ * directly into it*/
+ blist_ent_ptr->fd.FDSystem=(unsigned int)skb;
+ blist_ent_ptr->bd.BuffData=(char*)__pa(skb->data);
+ consistent_sync(skb->data,PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
+ /* align IP on 16 Byte (DMA_CTL set to skip 2 bytes) */
+ skb_reserve(skb,2);
+ blist_ent_ptr->bd.BuffLength=PKT_BUF_SZ-2;
+ blist_ent_ptr->fd.FDLength=1;
+ blist_ent_ptr->fd.FDCtl=FDCTL_COWNSFD_MSK;
+ blist_ent_ptr->bd.BDCtl=BDCTL_COWNSBD_MSK;
+}
+
+
+static int ether00_mem_init(struct net_device* dev)
+{
+ struct net_priv* priv=dev->priv;
+ struct tx_fda_ent *tx_fd_ptr,*tx_end_ptr;
+ struct rx_blist_ent* blist_ent_ptr;
+ int i;
+
+ /*
+ * Grab a block of on chip SRAM to contain the control stuctures for
+ * the ethernet MAC. This uncached becuase it needs to be accesses by both
+ * bus masters (cpu + mac). However, it shouldn't matter too much in terms
+ * of speed as its on chip memory
+ */
+ priv->dma_data=ioremap_nocache(EXC_SPSRAM_BLOCK0_BASE,EXC_SPSRAM_BLOCK0_SIZE );
+ if (!priv->dma_data)
+ return -ENOMEM;
+
+ priv->rx_fda_ptr=(struct rx_fda_ent*)priv->dma_data;
+ /*
+ * Now share it out amongst the Frame descriptors and the buffer list
+ */
+ priv->rx_blist_vp=(struct rx_blist_ent*)((unsigned int)priv->dma_data+RX_NUM_FDESC*sizeof(struct rx_fda_ent));
+
+ /*
+ *Initalise the FDA list
+ */
+ /* set ownership to the controller */
+ memset(priv->rx_fda_ptr,0x80,RX_NUM_FDESC*sizeof(struct rx_fda_ent));
+
+ /*
+ *Initialise the buffer list
+ */
+ blist_ent_ptr=priv->rx_blist_vp;
+ i=0;
+ while(blist_ent_ptr<(priv->rx_blist_vp+RX_NUM_BUFF)){
+ struct sk_buff *skb;
+ blist_ent_ptr->fd.FDLength=1;
+ skb=dev_alloc_skb(PKT_BUF_SZ);
+ if(skb){
+ setup_blist_entry(skb,blist_ent_ptr);
+ blist_ent_ptr->fd.FDNext=(FDA_DESC*)__dma_pa(blist_ent_ptr+1);
+ blist_ent_ptr->bd.BDStat=i++;
+ blist_ent_ptr++;
+ }
+ else
+ {
+ printk("Failed to initalise buffer list\n");
+ }
+
+ }
+ blist_ent_ptr--;
+ blist_ent_ptr->fd.FDNext=(FDA_DESC*)__dma_pa(priv->rx_blist_vp);
+
+ priv->tx_fdalist_vp=(struct tx_fda_ent*)(priv->rx_blist_vp+RX_NUM_BUFF);
+
+ /* Initialise the buffers to be a circular list. The mac will then go poll
+ * the list until it finds a frame ready to transmit */
+ tx_end_ptr=priv->tx_fdalist_vp+TX_NUM_FDESC;
+ for(tx_fd_ptr=priv->tx_fdalist_vp;tx_fd_ptr<tx_end_ptr;tx_fd_ptr++){
+ tx_fd_ptr->fd.FDNext=(FDA_DESC*)__dma_pa((tx_fd_ptr+1));
+ tx_fd_ptr->fd.FDCtl=1;
+ tx_fd_ptr->fd.FDStat=0;
+ tx_fd_ptr->fd.FDLength=1;
+
+ }
+ /* Change the last FDNext pointer to make a circular list */
+ tx_fd_ptr--;
+ tx_fd_ptr->fd.FDNext=(FDA_DESC*)__dma_pa(priv->tx_fdalist_vp);
+
+ /* Point the device at the chain of Rx and Tx Buffers */
+ writel((unsigned int)__dma_pa(priv->rx_fda_ptr),ETHER_FDA_BAS(dev->base_addr));
+ writel((RX_NUM_FDESC-1)*sizeof(struct rx_fda_ent),ETHER_FDA_LIM(dev->base_addr));
+ writel((unsigned int)__dma_pa(priv->rx_blist_vp),ETHER_BLFRMPTR(dev->base_addr));
+
+ writel((unsigned int)__dma_pa(priv->tx_fdalist_vp),ETHER_TXFRMPTR(dev->base_addr));
+
+ return 0;
+}
+
+
+void ether00_mem_update(void* dev_id)
+{
+ struct net_device* dev=dev_id;
+ struct net_priv* priv=dev->priv;
+ struct sk_buff* skb;
+ struct tx_fda_ent *fda_ptr=priv->tx_fdalist_vp;
+ struct rx_blist_ent* blist_ent_ptr;
+ unsigned long flags;
+
+ priv->tq_memupdate.sync=0;
+ //priv->tq_memupdate.list=
+ priv->memupdate_scheduled=0;
+
+ /* Transmit interrupt */
+ while(fda_ptr<(priv->tx_fdalist_vp+TX_NUM_FDESC)){
+ if(!(FDCTL_COWNSFD_MSK&fda_ptr->fd.FDCtl) && (ETHER_TX_STAT_COMP_MSK&fda_ptr->fd.FDStat)){
+ priv->stats.tx_packets++;
+ priv->stats.tx_bytes+=fda_ptr->bd.BuffLength;
+ skb=(struct sk_buff*)fda_ptr->fd.FDSystem;
+ //printk("%d:txcln:fda=%#x skb=%#x\n",jiffies,fda_ptr,skb);
+ dev_kfree_skb(skb);
+ fda_ptr->fd.FDSystem=0;
+ fda_ptr->fd.FDStat=0;
+ fda_ptr->fd.FDCtl=0;
+ }
+ fda_ptr++;
+ }
+ /* Fill in any missing buffers from the received queue */
+ spin_lock_irqsave(&priv->rx_lock,flags);
+ blist_ent_ptr=priv->rx_blist_vp;
+ while(blist_ent_ptr<(priv->rx_blist_vp+RX_NUM_BUFF)){
+ /* fd.FDSystem of 0 indicates we failed to allocate the buffer in the ISR */
+ if(!blist_ent_ptr->fd.FDSystem){
+ struct sk_buff *skb;
+ skb=dev_alloc_skb(PKT_BUF_SZ);
+ blist_ent_ptr->fd.FDSystem=(unsigned int)skb;
+ if(skb){
+ setup_blist_entry(skb,blist_ent_ptr);
+ }
+ else
+ {
+ break;
+ }
+ }
+ blist_ent_ptr++;
+ }
+ spin_unlock_irqrestore(&priv->rx_lock,flags);
+ if(priv->queue_stopped){
+ //printk("%d:cln:start q\n",jiffies);
+ netif_start_queue(dev);
+ }
+ if(priv->rx_disabled){
+ //printk("%d:enable_irq\n",jiffies);
+ priv->rx_disabled=0;
+ writel(ETHER_RX_CTL_RXEN_MSK,ETHER_RX_CTL(dev->base_addr));
+
+ }
+}
+
+
+static void ether00_int( int irq_num, void* dev_id, struct pt_regs* regs)
+{
+ struct net_device* dev=dev_id;
+ struct net_priv* priv=dev->priv;
+
+ unsigned int interruptValue;
+
+ interruptValue=readl(ETHER_INT_SRC(dev->base_addr));
+
+ //printk("INT_SRC=%x\n",interruptValue);
+
+ if(!(readl(ETHER_INT_SRC(dev->base_addr)) & ETHER_INT_SRC_IRQ_MSK))
+ {
+ return; /* Interrupt wasn't caused by us!! */
+ }
+
+ if(readl(ETHER_INT_SRC(dev->base_addr))&
+ (ETHER_INT_SRC_INTMACRX_MSK |
+ ETHER_INT_SRC_FDAEX_MSK |
+ ETHER_INT_SRC_BLEX_MSK)) {
+ struct rx_blist_ent* blist_ent_ptr;
+ struct rx_fda_ent* fda_ent_ptr;
+ struct sk_buff* skb;
+
+ fda_ent_ptr=priv->rx_fda_ptr;
+ spin_lock(&priv->rx_lock);
+ while(fda_ent_ptr<(priv->rx_fda_ptr+RX_NUM_FDESC)){
+ int result;
+
+ if(!(fda_ent_ptr->fd.FDCtl&FDCTL_COWNSFD_MSK))
+ {
+ /* This frame is ready for processing */
+ /*find the corresponding buffer in the bufferlist */
+ blist_ent_ptr=priv->rx_blist_vp+fda_ent_ptr->bd.BDStat;
+ skb=(struct sk_buff*)blist_ent_ptr->fd.FDSystem;
+
+ /* Pass this skb up the stack */
+ skb->dev=dev;
+ skb_put(skb,fda_ent_ptr->fd.FDLength);
+ skb->protocol=eth_type_trans(skb,dev);
+ skb->ip_summed=CHECKSUM_UNNECESSARY;
+ result=netif_rx(skb);
+ /* Update statistics */
+ priv->stats.rx_packets++;
+ priv->stats.rx_bytes+=fda_ent_ptr->fd.FDLength;
+
+ /* Free the FDA entry */
+ fda_ent_ptr->bd.BDStat=0xff;
+ fda_ent_ptr->fd.FDCtl=FDCTL_COWNSFD_MSK;
+
+ /* Allocate a new skb and point the bd entry to it */
+ blist_ent_ptr->fd.FDSystem=0;
+ skb=dev_alloc_skb(PKT_BUF_SZ);
+ //printk("allocskb=%#x\n",skb);
+ if(skb){
+ setup_blist_entry(skb,blist_ent_ptr);
+
+ }
+ else if(!priv->memupdate_scheduled){
+ int tmp;
+ /* There are no buffers at the moment, so schedule */
+ /* the background task to sort this out */
+ schedule_task(&priv->tq_memupdate);
+ priv->memupdate_scheduled=1;
+ printk(KERN_DEBUG "%s:No buffers",dev->name);
+ /* If this interrupt was due to a lack of buffers then
+ * we'd better stop the receiver too */
+ if(interruptValue&ETHER_INT_SRC_BLEX_MSK){
+ priv->rx_disabled=1;
+ tmp=readl(ETHER_INT_SRC(dev->base_addr));
+ writel(tmp&~ETHER_RX_CTL_RXEN_MSK,ETHER_RX_CTL(dev->base_addr));
+ printk(KERN_DEBUG "%s:Halting rx",dev->name);
+ }
+
+ }
+
+ }
+ fda_ent_ptr++;
+ }
+ spin_unlock(&priv->rx_lock);
+
+ /* Clear the interrupts */
+ writel(ETHER_INT_SRC_INTMACRX_MSK | ETHER_INT_SRC_FDAEX_MSK
+ | ETHER_INT_SRC_BLEX_MSK,ETHER_INT_SRC(dev->base_addr));
+
+ }
+
+ if(readl(ETHER_INT_SRC(dev->base_addr))&ETHER_INT_SRC_INTMACTX_MSK){
+
+ if(!priv->memupdate_scheduled){
+ schedule_task(&priv->tq_memupdate);
+ priv->memupdate_scheduled=1;
+ }
+ /* Clear the interrupt */
+ writel(ETHER_INT_SRC_INTMACTX_MSK,ETHER_INT_SRC(dev->base_addr));
+ }
+
+ if (readl(ETHER_INT_SRC(dev->base_addr)) & (ETHER_INT_SRC_SWINT_MSK|
+ ETHER_INT_SRC_INTEARNOT_MSK|
+ ETHER_INT_SRC_INTLINK_MSK|
+ ETHER_INT_SRC_INTEXBD_MSK|
+ ETHER_INT_SRC_INTTXCTLCMP_MSK))
+ {
+ /*
+ * Not using any of these so they shouldn't happen
+ *
+ * In the cased of INTEXBD - if you allocate more
+ * than 28 decsriptors you may need to think about this
+ */
+ printk("Not using this interrupt\n");
+ }
+
+ if (readl(ETHER_INT_SRC(dev->base_addr)) &
+ (ETHER_INT_SRC_INTSBUS_MSK |
+ ETHER_INT_SRC_INTNRABT_MSK
+ |ETHER_INT_SRC_DMPARERR_MSK))
+ {
+ /*
+ * Hardware errors, we can either ignore them and hope they go away
+ *or reset the device, I'll try the first for now to see if they happen
+ */
+ printk("Hardware error\n");
+ }
+}
+
+static void ether00_setup_ethernet_address(struct net_device* dev)
+{
+ int tmp;
+
+ dev->addr_len=6;
+ writew(0,ETHER_ARC_ADR(dev->base_addr));
+ writel((dev->dev_addr[0]<<24) |
+ (dev->dev_addr[1]<<16) |
+ (dev->dev_addr[2]<<8) |
+ dev->dev_addr[3],
+ ETHER_ARC_DATA(dev->base_addr));
+
+ writew(4,ETHER_ARC_ADR(dev->base_addr));
+ tmp=readl(ETHER_ARC_DATA(dev->base_addr));
+ tmp&=0xffff;
+ tmp|=(dev->dev_addr[4]<<24) | (dev->dev_addr[5]<<16);
+ writel(tmp, ETHER_ARC_DATA(dev->base_addr));
+ /* Enable this entry in the ARC */
+
+ writel(1,ETHER_ARC_ENA(dev->base_addr));
+
+ return;
+}
+
+
+static void ether00_reset(struct net_device *dev)
+{
+ /* reset the controller */
+ writew(ETHER_MAC_CTL_RESET_MSK,ETHER_MAC_CTL(dev->base_addr));
+
+ /*
+ * Make sure we're not going to send anything
+ */
+
+ writew(ETHER_TX_CTL_TXHALT_MSK,ETHER_TX_CTL(dev->base_addr));
+
+ /*
+ * Make sure we're not going to receive anything
+ */
+ writew(ETHER_RX_CTL_RXHALT_MSK,ETHER_RX_CTL(dev->base_addr));
+
+ /*
+ * Disable Interrupts for now, and set the burst size to 8 bytes
+ */
+
+ writel(ETHER_DMA_CTL_INTMASK_MSK |
+ ((8 << ETHER_DMA_CTL_DMBURST_OFST) & ETHER_DMA_CTL_DMBURST_MSK)
+ |(2<<ETHER_DMA_CTL_RXALIGN_OFST),
+ ETHER_DMA_CTL(dev->base_addr));
+
+
+ /*
+ * Set TxThrsh - start transmitting a packet after 1514
+ * bytes or when a packet is complete, whichever comes first
+ */
+ writew(1514,ETHER_TXTHRSH(dev->base_addr));
+
+ /*
+ * Set TxPollCtr. Each cycle is
+ * 61.44 microseconds with a 33 MHz bus
+ */
+ writew(1,ETHER_TXPOLLCTR(dev->base_addr));
+
+ /*
+ * Set Rx_Ctl - Turn off reception and let RxData turn it
+ * on later
+ */
+ writew(ETHER_RX_CTL_RXHALT_MSK,ETHER_RX_CTL(dev->base_addr));
+
+}
+
+
+static void ether00_set_multicast(struct net_device* dev)
+{
+ int count=dev->mc_count;
+
+ /* Set promiscuous mode if it's asked for. */
+
+ if (dev->flags&IFF_PROMISC){
+
+ writew( ETHER_ARC_CTL_COMPEN_MSK |
+ ETHER_ARC_CTL_BROADACC_MSK |
+ ETHER_ARC_CTL_GROUPACC_MSK |
+ ETHER_ARC_CTL_STATIONACC_MSK,
+ ETHER_ARC_CTL(dev->base_addr));
+ return;
+ }
+
+ /*
+ * Get all multicast packets if required, or if there are too
+ * many addresses to fit in hardware
+ */
+ if (dev->flags & IFF_ALLMULTI){
+ writew( ETHER_ARC_CTL_COMPEN_MSK |
+ ETHER_ARC_CTL_GROUPACC_MSK |
+ ETHER_ARC_CTL_BROADACC_MSK,
+ ETHER_ARC_CTL(dev->base_addr));
+ return;
+ }
+ if (dev->mc_count > (ETHER_ARC_SIZE - 1)){
+
+ printk(KERN_WARNING "Too many multicast addresses for hardware to filter - receiving all multicast packets\n");
+ writew( ETHER_ARC_CTL_COMPEN_MSK |
+ ETHER_ARC_CTL_GROUPACC_MSK |
+ ETHER_ARC_CTL_BROADACC_MSK,
+ ETHER_ARC_CTL(dev->base_addr));
+ return;
+ }
+
+ if(dev->mc_count){
+ struct dev_mc_list *mc_list_ent=dev->mc_list;
+ unsigned int temp,i;
+ DEBUG(printk("mc_count=%d mc_list=%#x\n",dev-> mc_count, dev->mc_list));
+ DEBUG(printk("mc addr=%02#x%02x%02x%02x%02x%02x\n",
+ mc_list_ent->dmi_addr[5],
+ mc_list_ent->dmi_addr[4],
+ mc_list_ent->dmi_addr[3],
+ mc_list_ent->dmi_addr[2],
+ mc_list_ent->dmi_addr[1],
+ mc_list_ent->dmi_addr[0]);)
+
+ /*
+ * The first 6 bytes are the MAC address, so
+ * don't change them!
+ */
+ writew(4,ETHER_ARC_ADR(dev->base_addr));
+ temp=readl(ETHER_ARC_DATA(dev->base_addr));
+ temp&=0xffff0000;
+
+ /* Disable the current multicast stuff */
+ writel(1,ETHER_ARC_ENA(dev->base_addr));
+
+ for(;;){
+ temp|=mc_list_ent->dmi_addr[1] |
+ mc_list_ent->dmi_addr[0]<<8;
+ writel(temp,ETHER_ARC_DATA(dev->base_addr));
+
+ i=readl(ETHER_ARC_ADR(dev->base_addr));
+ writew(i+4,ETHER_ARC_ADR(dev->base_addr));
+
+ temp=mc_list_ent->dmi_addr[5]|
+ mc_list_ent->dmi_addr[4]<<8 |
+ mc_list_ent->dmi_addr[3]<<16 |
+ mc_list_ent->dmi_addr[2]<<24;
+ writel(temp,ETHER_ARC_DATA(dev->base_addr));
+
+ count--;
+ if(!mc_list_ent->next || !count){
+ break;
+ }
+ DEBUG(printk("mc_list_next=%#x\n",mc_list_ent->next);)
+ mc_list_ent=mc_list_ent->next;
+
+
+ i=readl(ETHER_ARC_ADR(dev->base_addr));
+ writel(i+4,ETHER_ARC_ADR(dev->base_addr));
+
+ temp=mc_list_ent->dmi_addr[3]|
+ mc_list_ent->dmi_addr[2]<<8 |
+ mc_list_ent->dmi_addr[1]<<16 |
+ mc_list_ent->dmi_addr[0]<<24;
+ writel(temp,ETHER_ARC_DATA(dev->base_addr));
+
+ i=readl(ETHER_ARC_ADR(dev->base_addr));
+ writel(i+4,ETHER_ARC_ADR(dev->base_addr));
+
+ temp=mc_list_ent->dmi_addr[4]<<16 |
+ mc_list_ent->dmi_addr[5]<<24;
+
+ writel(temp,ETHER_ARC_DATA(dev->base_addr));
+
+ count--;
+ if(!mc_list_ent->next || !count){
+ break;
+ }
+ mc_list_ent=mc_list_ent->next;
+ }
+
+
+ if(count)
+ printk(KERN_WARNING "Multicast list size error\n");
+
+
+ writew( ETHER_ARC_CTL_BROADACC_MSK|
+ ETHER_ARC_CTL_COMPEN_MSK,
+ ETHER_ARC_CTL(dev->base_addr));
+
+ }
+
+ /* enable the active ARC enties */
+ writew((1<<(count+2))-1,ETHER_ARC_ENA(dev->base_addr));
+}
+
+
+static int ether00_open(struct net_device* dev)
+{
+ int result,tmp;
+ struct net_priv* priv;
+
+ if (!is_valid_ether_addr(dev->dev_addr))
+ return -EINVAL;
+
+ /* Install interrupt handlers */
+ result=request_irq(dev->irq,ether00_int,0,"ether00",dev);
+ if(result)
+ goto open_err1;
+
+ result=request_irq(2,ether00_phy_int,0,"ether00_phy",dev);
+ if(result)
+ goto open_err2;
+
+ ether00_reset(dev);
+ result=ether00_mem_init(dev);
+ if(result)
+ goto open_err3;
+
+
+ ether00_setup_ethernet_address(dev);
+
+ ether00_set_multicast(dev);
+
+ result=ether00_write_phy(dev,PHY_CONTROL, PHY_CONTROL_ANEGEN_MSK | PHY_CONTROL_RANEG_MSK);
+ if(result)
+ goto open_err4;
+ result=ether00_write_phy(dev,PHY_IRQ_CONTROL, PHY_IRQ_CONTROL_LS_CHG_IE_MSK |
+ PHY_IRQ_CONTROL_ANEG_COMP_IE_MSK);
+ if(result)
+ goto open_err4;
+
+ /* Start the device enable interrupts */
+ writew(ETHER_RX_CTL_RXEN_MSK
+// | ETHER_RX_CTL_STRIPCRC_MSK
+ | ETHER_RX_CTL_ENGOOD_MSK
+ | ETHER_RX_CTL_ENRXPAR_MSK| ETHER_RX_CTL_ENLONGERR_MSK
+ | ETHER_RX_CTL_ENOVER_MSK| ETHER_RX_CTL_ENCRCERR_MSK,
+ ETHER_RX_CTL(dev->base_addr));
+
+ writew(ETHER_TX_CTL_TXEN_MSK|
+ ETHER_TX_CTL_ENEXDEFER_MSK|
+ ETHER_TX_CTL_ENLCARR_MSK|
+ ETHER_TX_CTL_ENEXCOLL_MSK|
+ ETHER_TX_CTL_ENLATECOLL_MSK|
+ ETHER_TX_CTL_ENTXPAR_MSK|
+ ETHER_TX_CTL_ENCOMP_MSK,
+ ETHER_TX_CTL(dev->base_addr));
+
+ tmp=readl(ETHER_DMA_CTL(dev->base_addr));
+ writel(tmp&~ETHER_DMA_CTL_INTMASK_MSK,ETHER_DMA_CTL(dev->base_addr));
+
+ return 0;
+
+ open_err4:
+ ether00_reset(dev);
+ open_err3:
+ free_irq(2,dev);
+ open_err2:
+ free_irq(dev->irq,dev);
+ open_err1:
+ return result;
+
+}
+
+
+static int ether00_tx(struct sk_buff* skb, struct net_device* dev)
+{
+ struct net_priv *priv=dev->priv;
+ struct tx_fda_ent *fda_ptr;
+ int i;
+
+
+ /*
+ * Find an empty slot in which to stick the frame
+ */
+ fda_ptr=(struct tx_fda_ent*)__dma_va(readl(ETHER_TXFRMPTR(dev->base_addr)));
+ i=0;
+ while(i<TX_NUM_FDESC){
+ if (fda_ptr->fd.FDStat||(fda_ptr->fd.FDCtl & FDCTL_COWNSFD_MSK)){
+ fda_ptr =(struct tx_fda_ent*) __dma_va((struct tx_fda_ent*)fda_ptr->fd.FDNext);
+ }
+ else {
+ break;
+ }
+ i++;
+ }
+
+ /* Write the skb data from the cache*/
+ consistent_sync(skb->data,skb->len,PCI_DMA_TODEVICE);
+ fda_ptr->bd.BuffData=(char*)__pa(skb->data);
+ fda_ptr->bd.BuffLength=(unsigned short)skb->len;
+ /* Save the pointer to the skb for freeing later */
+ fda_ptr->fd.FDSystem=(unsigned int)skb;
+ fda_ptr->fd.FDStat=0;
+ /* Pass ownership of the buffers to the controller */
+ fda_ptr->fd.FDCtl=1;
+ fda_ptr->fd.FDCtl|=FDCTL_COWNSFD_MSK;
+
+ /* If the next buffer in the list is full, stop the queue */
+ fda_ptr=(struct tx_fda_ent*)__dma_va(fda_ptr->fd.FDNext);
+ if ((fda_ptr->fd.FDStat)||(fda_ptr->fd.FDCtl & FDCTL_COWNSFD_MSK)){
+ netif_stop_queue(dev);
+ priv->queue_stopped=1;
+ }
+
+ return 0;
+}
+
+static struct net_device_stats *ether00_stats(struct net_device* dev)
+{
+ struct net_priv *priv=dev->priv;
+ return &priv->stats;
+}
+
+
+static int ether00_stop(struct net_device* dev)
+{
+ struct net_priv *priv=dev->priv;
+ int tmp;
+
+ /* Stop/disable the device. */
+ tmp=readw(ETHER_RX_CTL(dev->base_addr));
+ tmp&=~(ETHER_RX_CTL_RXEN_MSK | ETHER_RX_CTL_ENGOOD_MSK);
+ tmp|=ETHER_RX_CTL_RXHALT_MSK;
+ writew(tmp,ETHER_RX_CTL(dev->base_addr));
+
+ tmp=readl(ETHER_TX_CTL(dev->base_addr));
+ tmp&=~ETHER_TX_CTL_TXEN_MSK;
+ tmp|=ETHER_TX_CTL_TXHALT_MSK;
+ writel(tmp,ETHER_TX_CTL(dev->base_addr));
+
+ /* Free up system resources */
+ free_irq(dev->irq,dev);
+ free_irq(2,dev);
+ iounmap(priv->dma_data);
+
+ return 0;
+}
+
+
+static void ether00_get_ethernet_address(struct net_device* dev)
+{
+ struct mtd_info *mymtd=NULL;
+ int i;
+ size_t retlen;
+
+ /*
+ * For the Epxa10 dev board (camelot), the ethernet MAC
+ * address is of the form 00:aa:aa:00:xx:xx where
+ * 00:aa:aa is the Altera vendor ID and xx:xx is the
+ * last 2 bytes of the board serial number, as programmed
+ * into the OTP area of the flash device on EBI1. If this
+ * isn't an expa10 dev board, or there's no mtd support to
+ * read the serial number from flash then we'll force the
+ * use to set their own mac address using ifconfig.
+ */
+
+#ifdef CONFIG_ARCH_CAMELOT
+#ifdef CONFIG_MTD
+ /* get the mtd_info structure for the first mtd device*/
+ for(i=0;i<MAX_MTD_DEVICES;i++){
+ mymtd=get_mtd_device(NULL,i);
+ if(!mymtd||!strcmp(mymtd->name,"EPXA10DB flash"))
+ break;
+ }
+
+ if(!mymtd || !mymtd->read_user_prot_reg){
+ printk(KERN_WARNING "%s: Failed to read MAC address from flash\n",dev->name);
+ }else{
+ mymtd->read_user_prot_reg(mymtd,2,1,&retlen,&dev->dev_addr[5]);
+ mymtd->read_user_prot_reg(mymtd,3,1,&retlen,&dev->dev_addr[4]);
+ dev->dev_addr[3]=0;
+ dev->dev_addr[2]=vendor_id[1];
+ dev->dev_addr[1]=vendor_id[0];
+ dev->dev_addr[0]=0;
+ }
+#else
+ printk(KERN_WARNING "%s: MTD support required to read MAC address from EPXA10 dev board\n", dev->name);
+#endif
+#endif
+
+ if (!is_valid_ether_addr(dev->dev_addr))
+ printk("%s: Invalid ethernet MAC address. Please set using "
+ "ifconfig\n", dev->name);
+
+}
+
+/*
+ * Keep a mapping of dev_info addresses -> port lines to use when
+ * removing ports dev==NULL indicates unused entry
+ */
+
+
+static struct net_device* dev_list[ETH_NR];
+
+static int ether00_add_device(struct pldhs_dev_info* dev_info,void* dev_ps_data)
+{
+ struct net_device *dev;
+ struct net_priv *priv;
+ void *map_addr;
+ int result;
+ int i;
+
+ i=0;
+ while(dev_list[i] && i < ETH_NR)
+ i++;
+
+ if(i==ETH_NR){
+ printk(KERN_WARNING "ether00: Maximum number of ports reached\n");
+ return 0;
+ }
+
+
+ if (!request_mem_region(dev_info->base_addr, MAC_REG_SIZE, "ether00"))
+ return -EBUSY;
+
+ dev = alloc_etherdev(sizeof(struct net_priv));
+ if(!dev) {
+ result = -ENOMEM;
+ goto out_release;
+ }
+ priv = dev->priv;
+
+ priv->tq_memupdate.routine=ether00_mem_update;
+ priv->tq_memupdate.data=(void*) dev;
+
+ spin_lock_init(&priv->rx_lock);
+
+ map_addr=ioremap_nocache(dev_info->base_addr,SZ_4K);
+ if(!map_addr){
+ result = -ENOMEM;
+ out_kfree;
+ }
+
+ dev->open=ether00_open;
+ dev->stop=ether00_stop;
+ dev->set_multicast_list=ether00_set_multicast;
+ dev->hard_start_xmit=ether00_tx;
+ dev->get_stats=ether00_stats;
+
+ ether00_get_ethernet_address(dev);
+
+ SET_MODULE_OWNER(dev);
+
+ dev->base_addr=(unsigned int)map_addr;
+ dev->irq=dev_info->irq;
+ dev->features=NETIF_F_DYNALLOC | NETIF_F_HW_CSUM;
+
+ result=register_netdev(dev);
+ if(result){
+ printk("Ether00: Error %i registering driver\n",result);
+ goto out_unmap;
+ }
+ printk("registered ether00 device at %#x\n",dev_info->base_addr);
+
+ dev_list[i]=dev;
+
+ return result;
+
+ out_unmap:
+ iounmap(map_addr);
+ out_kfree:
+ free_netdev(dev);
+ out_release:
+ release_mem_region(dev_info->base_addr, MAC_REG_SIZE);
+ return result;
+}
+
+
+static int ether00_remove_devices(void)
+{
+ int i;
+
+ for(i=0;i<ETH_NR;i++){
+ if(dev_list[i]){
+ netif_device_detach(dev_list[i]);
+ unregister_netdev(dev_list[i]);
+ iounmap((void*)dev_list[i]->base_addr);
+ release_mem_region(dev_list[i]->base_addr, MAC_REG_SIZE);
+ free_netdev(dev_list[i]);
+ dev_list[i]=0;
+ }
+ }
+ return 0;
+}
+
+static struct pld_hotswap_ops ether00_pldhs_ops={
+ .name = ETHER00_NAME,
+ .add_device = ether00_add_device,
+ .remove_devices = ether00_remove_devices,
+};
+
+
+static void __exit ether00_cleanup_module(void)
+{
+ int result;
+ result=ether00_remove_devices();
+ if(result)
+ printk(KERN_WARNING "ether00: failed to remove all devices\n");
+
+ pldhs_unregister_driver(ETHER00_NAME);
+}
+module_exit(ether00_cleanup_module);
+
+
+static int __init ether00_mod_init(void)
+{
+ printk("mod init\n");
+ return pldhs_register_driver(&ether00_pldhs_ops);
+
+}
+
+module_init(ether00_mod_init);
+
diff --git a/drivers/net/arm/ether1.c b/drivers/net/arm/ether1.c
new file mode 100644
index 000000000000..36475eb2727f
--- /dev/null
+++ b/drivers/net/arm/ether1.c
@@ -0,0 +1,1110 @@
+/*
+ * linux/drivers/acorn/net/ether1.c
+ *
+ * Copyright (C) 1996-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Acorn ether1 driver (82586 chip) for Acorn machines
+ *
+ * We basically keep two queues in the cards memory - one for transmit
+ * and one for receive. Each has a head and a tail. The head is where
+ * we/the chip adds packets to be transmitted/received, and the tail
+ * is where the transmitter has got to/where the receiver will stop.
+ * Both of these queues are circular, and since the chip is running
+ * all the time, we have to be careful when we modify the pointers etc
+ * so that the buffer memory contents is valid all the time.
+ *
+ * Change log:
+ * 1.00 RMK Released
+ * 1.01 RMK 19/03/1996 Transfers the last odd byte onto/off of the card now.
+ * 1.02 RMK 25/05/1997 Added code to restart RU if it goes not ready
+ * 1.03 RMK 14/09/1997 Cleaned up the handling of a reset during the TX interrupt.
+ * Should prevent lockup.
+ * 1.04 RMK 17/09/1997 Added more info when initialsation of chip goes wrong.
+ * TDR now only reports failure when chip reports non-zero
+ * TDR time-distance.
+ * 1.05 RMK 31/12/1997 Removed calls to dev_tint for 2.1
+ * 1.06 RMK 10/02/2000 Updated for 2.3.43
+ * 1.07 RMK 13/05/2000 Updated for 2.3.99-pre8
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/bitops.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/ecard.h>
+
+#define __ETHER1_C
+#include "ether1.h"
+
+static unsigned int net_debug = NET_DEBUG;
+
+#define BUFFER_SIZE 0x10000
+#define TX_AREA_START 0x00100
+#define TX_AREA_END 0x05000
+#define RX_AREA_START 0x05000
+#define RX_AREA_END 0x0fc00
+
+static int ether1_open(struct net_device *dev);
+static int ether1_sendpacket(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t ether1_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static int ether1_close(struct net_device *dev);
+static struct net_device_stats *ether1_getstats(struct net_device *dev);
+static void ether1_setmulticastlist(struct net_device *dev);
+static void ether1_timeout(struct net_device *dev);
+
+/* ------------------------------------------------------------------------- */
+
+static char version[] __initdata = "ether1 ethernet driver (c) 2000 Russell King v1.07\n";
+
+#define BUS_16 16
+#define BUS_8 8
+
+/* ------------------------------------------------------------------------- */
+
+#define DISABLEIRQS 1
+#define NORMALIRQS 0
+
+#define ether1_readw(dev, addr, type, offset, svflgs) ether1_inw_p (dev, addr + (int)(&((type *)0)->offset), svflgs)
+#define ether1_writew(dev, val, addr, type, offset, svflgs) ether1_outw_p (dev, val, addr + (int)(&((type *)0)->offset), svflgs)
+
+static inline unsigned short
+ether1_inw_p (struct net_device *dev, int addr, int svflgs)
+{
+ unsigned long flags;
+ unsigned short ret;
+
+ if (svflgs)
+ local_irq_save (flags);
+
+ writeb(addr >> 12, REG_PAGE);
+ ret = readw(ETHER1_RAM + ((addr & 4095) << 1));
+ if (svflgs)
+ local_irq_restore (flags);
+ return ret;
+}
+
+static inline void
+ether1_outw_p (struct net_device *dev, unsigned short val, int addr, int svflgs)
+{
+ unsigned long flags;
+
+ if (svflgs)
+ local_irq_save (flags);
+
+ writeb(addr >> 12, REG_PAGE);
+ writew(val, ETHER1_RAM + ((addr & 4095) << 1));
+ if (svflgs)
+ local_irq_restore (flags);
+}
+
+/*
+ * Some inline assembler to allow fast transfers on to/off of the card.
+ * Since this driver depends on some features presented by the ARM
+ * specific architecture, and that you can't configure this driver
+ * without specifiing ARM mode, this is not a problem.
+ *
+ * This routine is essentially an optimised memcpy from the card's
+ * onboard RAM to kernel memory.
+ */
+static void
+ether1_writebuffer (struct net_device *dev, void *data, unsigned int start, unsigned int length)
+{
+ unsigned int page, thislen, offset;
+ void __iomem *addr;
+
+ offset = start & 4095;
+ page = start >> 12;
+ addr = ETHER1_RAM + (offset << 1);
+
+ if (offset + length > 4096)
+ thislen = 4096 - offset;
+ else
+ thislen = length;
+
+ do {
+ int used;
+
+ writeb(page, REG_PAGE);
+ length -= thislen;
+
+ __asm__ __volatile__(
+ "subs %3, %3, #2\n\
+ bmi 2f\n\
+1: ldr %0, [%1], #2\n\
+ mov %0, %0, lsl #16\n\
+ orr %0, %0, %0, lsr #16\n\
+ str %0, [%2], #4\n\
+ subs %3, %3, #2\n\
+ bmi 2f\n\
+ ldr %0, [%1], #2\n\
+ mov %0, %0, lsl #16\n\
+ orr %0, %0, %0, lsr #16\n\
+ str %0, [%2], #4\n\
+ subs %3, %3, #2\n\
+ bmi 2f\n\
+ ldr %0, [%1], #2\n\
+ mov %0, %0, lsl #16\n\
+ orr %0, %0, %0, lsr #16\n\
+ str %0, [%2], #4\n\
+ subs %3, %3, #2\n\
+ bmi 2f\n\
+ ldr %0, [%1], #2\n\
+ mov %0, %0, lsl #16\n\
+ orr %0, %0, %0, lsr #16\n\
+ str %0, [%2], #4\n\
+ subs %3, %3, #2\n\
+ bpl 1b\n\
+2: adds %3, %3, #1\n\
+ ldreqb %0, [%1]\n\
+ streqb %0, [%2]"
+ : "=&r" (used), "=&r" (data)
+ : "r" (addr), "r" (thislen), "1" (data));
+
+ addr = ETHER1_RAM;
+
+ thislen = length;
+ if (thislen > 4096)
+ thislen = 4096;
+ page++;
+ } while (thislen);
+}
+
+static void
+ether1_readbuffer (struct net_device *dev, void *data, unsigned int start, unsigned int length)
+{
+ unsigned int page, thislen, offset;
+ void __iomem *addr;
+
+ offset = start & 4095;
+ page = start >> 12;
+ addr = ETHER1_RAM + (offset << 1);
+
+ if (offset + length > 4096)
+ thislen = 4096 - offset;
+ else
+ thislen = length;
+
+ do {
+ int used;
+
+ writeb(page, REG_PAGE);
+ length -= thislen;
+
+ __asm__ __volatile__(
+ "subs %3, %3, #2\n\
+ bmi 2f\n\
+1: ldr %0, [%2], #4\n\
+ strb %0, [%1], #1\n\
+ mov %0, %0, lsr #8\n\
+ strb %0, [%1], #1\n\
+ subs %3, %3, #2\n\
+ bmi 2f\n\
+ ldr %0, [%2], #4\n\
+ strb %0, [%1], #1\n\
+ mov %0, %0, lsr #8\n\
+ strb %0, [%1], #1\n\
+ subs %3, %3, #2\n\
+ bmi 2f\n\
+ ldr %0, [%2], #4\n\
+ strb %0, [%1], #1\n\
+ mov %0, %0, lsr #8\n\
+ strb %0, [%1], #1\n\
+ subs %3, %3, #2\n\
+ bmi 2f\n\
+ ldr %0, [%2], #4\n\
+ strb %0, [%1], #1\n\
+ mov %0, %0, lsr #8\n\
+ strb %0, [%1], #1\n\
+ subs %3, %3, #2\n\
+ bpl 1b\n\
+2: adds %3, %3, #1\n\
+ ldreqb %0, [%2]\n\
+ streqb %0, [%1]"
+ : "=&r" (used), "=&r" (data)
+ : "r" (addr), "r" (thislen), "1" (data));
+
+ addr = ETHER1_RAM;
+
+ thislen = length;
+ if (thislen > 4096)
+ thislen = 4096;
+ page++;
+ } while (thislen);
+}
+
+static int __init
+ether1_ramtest(struct net_device *dev, unsigned char byte)
+{
+ unsigned char *buffer = kmalloc (BUFFER_SIZE, GFP_KERNEL);
+ int i, ret = BUFFER_SIZE;
+ int max_errors = 15;
+ int bad = -1;
+ int bad_start = 0;
+
+ if (!buffer)
+ return 1;
+
+ memset (buffer, byte, BUFFER_SIZE);
+ ether1_writebuffer (dev, buffer, 0, BUFFER_SIZE);
+ memset (buffer, byte ^ 0xff, BUFFER_SIZE);
+ ether1_readbuffer (dev, buffer, 0, BUFFER_SIZE);
+
+ for (i = 0; i < BUFFER_SIZE; i++) {
+ if (buffer[i] != byte) {
+ if (max_errors >= 0 && bad != buffer[i]) {
+ if (bad != -1)
+ printk ("\n");
+ printk (KERN_CRIT "%s: RAM failed with (%02X instead of %02X) at 0x%04X",
+ dev->name, buffer[i], byte, i);
+ ret = -ENODEV;
+ max_errors --;
+ bad = buffer[i];
+ bad_start = i;
+ }
+ } else {
+ if (bad != -1) {
+ if (bad_start == i - 1)
+ printk ("\n");
+ else
+ printk (" - 0x%04X\n", i - 1);
+ bad = -1;
+ }
+ }
+ }
+
+ if (bad != -1)
+ printk (" - 0x%04X\n", BUFFER_SIZE);
+ kfree (buffer);
+
+ return ret;
+}
+
+static int
+ether1_reset (struct net_device *dev)
+{
+ writeb(CTRL_RST|CTRL_ACK, REG_CONTROL);
+ return BUS_16;
+}
+
+static int __init
+ether1_init_2(struct net_device *dev)
+{
+ int i;
+ dev->mem_start = 0;
+
+ i = ether1_ramtest (dev, 0x5a);
+
+ if (i > 0)
+ i = ether1_ramtest (dev, 0x1e);
+
+ if (i <= 0)
+ return -ENODEV;
+
+ dev->mem_end = i;
+ return 0;
+}
+
+/*
+ * These are the structures that are loaded into the ether RAM card to
+ * initialise the 82586
+ */
+
+/* at 0x0100 */
+#define NOP_ADDR (TX_AREA_START)
+#define NOP_SIZE (0x06)
+static nop_t init_nop = {
+ 0,
+ CMD_NOP,
+ NOP_ADDR
+};
+
+/* at 0x003a */
+#define TDR_ADDR (0x003a)
+#define TDR_SIZE (0x08)
+static tdr_t init_tdr = {
+ 0,
+ CMD_TDR | CMD_INTR,
+ NOP_ADDR,
+ 0
+};
+
+/* at 0x002e */
+#define MC_ADDR (0x002e)
+#define MC_SIZE (0x0c)
+static mc_t init_mc = {
+ 0,
+ CMD_SETMULTICAST,
+ TDR_ADDR,
+ 0,
+ { { 0, } }
+};
+
+/* at 0x0022 */
+#define SA_ADDR (0x0022)
+#define SA_SIZE (0x0c)
+static sa_t init_sa = {
+ 0,
+ CMD_SETADDRESS,
+ MC_ADDR,
+ { 0, }
+};
+
+/* at 0x0010 */
+#define CFG_ADDR (0x0010)
+#define CFG_SIZE (0x12)
+static cfg_t init_cfg = {
+ 0,
+ CMD_CONFIG,
+ SA_ADDR,
+ 8,
+ 8,
+ CFG8_SRDY,
+ CFG9_PREAMB8 | CFG9_ADDRLENBUF | CFG9_ADDRLEN(6),
+ 0,
+ 0x60,
+ 0,
+ CFG13_RETRY(15) | CFG13_SLOTH(2),
+ 0,
+};
+
+/* at 0x0000 */
+#define SCB_ADDR (0x0000)
+#define SCB_SIZE (0x10)
+static scb_t init_scb = {
+ 0,
+ SCB_CMDACKRNR | SCB_CMDACKCNA | SCB_CMDACKFR | SCB_CMDACKCX,
+ CFG_ADDR,
+ RX_AREA_START,
+ 0,
+ 0,
+ 0,
+ 0
+};
+
+/* at 0xffee */
+#define ISCP_ADDR (0xffee)
+#define ISCP_SIZE (0x08)
+static iscp_t init_iscp = {
+ 1,
+ SCB_ADDR,
+ 0x0000,
+ 0x0000
+};
+
+/* at 0xfff6 */
+#define SCP_ADDR (0xfff6)
+#define SCP_SIZE (0x0a)
+static scp_t init_scp = {
+ SCP_SY_16BBUS,
+ { 0, 0 },
+ ISCP_ADDR,
+ 0
+};
+
+#define RFD_SIZE (0x16)
+static rfd_t init_rfd = {
+ 0,
+ 0,
+ 0,
+ 0,
+ { 0, },
+ { 0, },
+ 0
+};
+
+#define RBD_SIZE (0x0a)
+static rbd_t init_rbd = {
+ 0,
+ 0,
+ 0,
+ 0,
+ ETH_FRAME_LEN + 8
+};
+
+#define TX_SIZE (0x08)
+#define TBD_SIZE (0x08)
+
+static int
+ether1_init_for_open (struct net_device *dev)
+{
+ int i, status, addr, next, next2;
+ int failures = 0;
+ unsigned long timeout;
+
+ writeb(CTRL_RST|CTRL_ACK, REG_CONTROL);
+
+ for (i = 0; i < 6; i++)
+ init_sa.sa_addr[i] = dev->dev_addr[i];
+
+ /* load data structures into ether1 RAM */
+ ether1_writebuffer (dev, &init_scp, SCP_ADDR, SCP_SIZE);
+ ether1_writebuffer (dev, &init_iscp, ISCP_ADDR, ISCP_SIZE);
+ ether1_writebuffer (dev, &init_scb, SCB_ADDR, SCB_SIZE);
+ ether1_writebuffer (dev, &init_cfg, CFG_ADDR, CFG_SIZE);
+ ether1_writebuffer (dev, &init_sa, SA_ADDR, SA_SIZE);
+ ether1_writebuffer (dev, &init_mc, MC_ADDR, MC_SIZE);
+ ether1_writebuffer (dev, &init_tdr, TDR_ADDR, TDR_SIZE);
+ ether1_writebuffer (dev, &init_nop, NOP_ADDR, NOP_SIZE);
+
+ if (ether1_readw(dev, CFG_ADDR, cfg_t, cfg_command, NORMALIRQS) != CMD_CONFIG) {
+ printk (KERN_ERR "%s: detected either RAM fault or compiler bug\n",
+ dev->name);
+ return 1;
+ }
+
+ /*
+ * setup circularly linked list of { rfd, rbd, buffer }, with
+ * all rfds circularly linked, rbds circularly linked.
+ * First rfd is linked to scp, first rbd is linked to first
+ * rfd. Last rbd has a suspend command.
+ */
+ addr = RX_AREA_START;
+ do {
+ next = addr + RFD_SIZE + RBD_SIZE + ETH_FRAME_LEN + 10;
+ next2 = next + RFD_SIZE + RBD_SIZE + ETH_FRAME_LEN + 10;
+
+ if (next2 >= RX_AREA_END) {
+ next = RX_AREA_START;
+ init_rfd.rfd_command = RFD_CMDEL | RFD_CMDSUSPEND;
+ priv(dev)->rx_tail = addr;
+ } else
+ init_rfd.rfd_command = 0;
+ if (addr == RX_AREA_START)
+ init_rfd.rfd_rbdoffset = addr + RFD_SIZE;
+ else
+ init_rfd.rfd_rbdoffset = 0;
+ init_rfd.rfd_link = next;
+ init_rbd.rbd_link = next + RFD_SIZE;
+ init_rbd.rbd_bufl = addr + RFD_SIZE + RBD_SIZE;
+
+ ether1_writebuffer (dev, &init_rfd, addr, RFD_SIZE);
+ ether1_writebuffer (dev, &init_rbd, addr + RFD_SIZE, RBD_SIZE);
+ addr = next;
+ } while (next2 < RX_AREA_END);
+
+ priv(dev)->tx_link = NOP_ADDR;
+ priv(dev)->tx_head = NOP_ADDR + NOP_SIZE;
+ priv(dev)->tx_tail = TDR_ADDR;
+ priv(dev)->rx_head = RX_AREA_START;
+
+ /* release reset & give 586 a prod */
+ priv(dev)->resetting = 1;
+ priv(dev)->initialising = 1;
+ writeb(CTRL_RST, REG_CONTROL);
+ writeb(0, REG_CONTROL);
+ writeb(CTRL_CA, REG_CONTROL);
+
+ /* 586 should now unset iscp.busy */
+ timeout = jiffies + HZ/2;
+ while (ether1_readw(dev, ISCP_ADDR, iscp_t, iscp_busy, DISABLEIRQS) == 1) {
+ if (time_after(jiffies, timeout)) {
+ printk (KERN_WARNING "%s: can't initialise 82586: iscp is busy\n", dev->name);
+ return 1;
+ }
+ }
+
+ /* check status of commands that we issued */
+ timeout += HZ/10;
+ while (((status = ether1_readw(dev, CFG_ADDR, cfg_t, cfg_status, DISABLEIRQS))
+ & STAT_COMPLETE) == 0) {
+ if (time_after(jiffies, timeout))
+ break;
+ }
+
+ if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) {
+ printk (KERN_WARNING "%s: can't initialise 82586: config status %04X\n", dev->name, status);
+ printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name,
+ ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS),
+ ether1_readw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS),
+ ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS),
+ ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS));
+ failures += 1;
+ }
+
+ timeout += HZ/10;
+ while (((status = ether1_readw(dev, SA_ADDR, sa_t, sa_status, DISABLEIRQS))
+ & STAT_COMPLETE) == 0) {
+ if (time_after(jiffies, timeout))
+ break;
+ }
+
+ if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) {
+ printk (KERN_WARNING "%s: can't initialise 82586: set address status %04X\n", dev->name, status);
+ printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name,
+ ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS),
+ ether1_readw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS),
+ ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS),
+ ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS));
+ failures += 1;
+ }
+
+ timeout += HZ/10;
+ while (((status = ether1_readw(dev, MC_ADDR, mc_t, mc_status, DISABLEIRQS))
+ & STAT_COMPLETE) == 0) {
+ if (time_after(jiffies, timeout))
+ break;
+ }
+
+ if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) {
+ printk (KERN_WARNING "%s: can't initialise 82586: set multicast status %04X\n", dev->name, status);
+ printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name,
+ ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS),
+ ether1_readw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS),
+ ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS),
+ ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS));
+ failures += 1;
+ }
+
+ timeout += HZ;
+ while (((status = ether1_readw(dev, TDR_ADDR, tdr_t, tdr_status, DISABLEIRQS))
+ & STAT_COMPLETE) == 0) {
+ if (time_after(jiffies, timeout))
+ break;
+ }
+
+ if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) {
+ printk (KERN_WARNING "%s: can't tdr (ignored)\n", dev->name);
+ printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name,
+ ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS),
+ ether1_readw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS),
+ ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS),
+ ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS));
+ } else {
+ status = ether1_readw(dev, TDR_ADDR, tdr_t, tdr_result, DISABLEIRQS);
+ if (status & TDR_XCVRPROB)
+ printk (KERN_WARNING "%s: i/f failed tdr: transceiver problem\n", dev->name);
+ else if ((status & (TDR_SHORT|TDR_OPEN)) && (status & TDR_TIME)) {
+#ifdef FANCY
+ printk (KERN_WARNING "%s: i/f failed tdr: cable %s %d.%d us away\n", dev->name,
+ status & TDR_SHORT ? "short" : "open", (status & TDR_TIME) / 10,
+ (status & TDR_TIME) % 10);
+#else
+ printk (KERN_WARNING "%s: i/f failed tdr: cable %s %d clks away\n", dev->name,
+ status & TDR_SHORT ? "short" : "open", (status & TDR_TIME));
+#endif
+ }
+ }
+
+ if (failures)
+ ether1_reset (dev);
+ return failures ? 1 : 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static int
+ether1_txalloc (struct net_device *dev, int size)
+{
+ int start, tail;
+
+ size = (size + 1) & ~1;
+ tail = priv(dev)->tx_tail;
+
+ if (priv(dev)->tx_head + size > TX_AREA_END) {
+ if (tail > priv(dev)->tx_head)
+ return -1;
+ start = TX_AREA_START;
+ if (start + size > tail)
+ return -1;
+ priv(dev)->tx_head = start + size;
+ } else {
+ if (priv(dev)->tx_head < tail && (priv(dev)->tx_head + size) > tail)
+ return -1;
+ start = priv(dev)->tx_head;
+ priv(dev)->tx_head += size;
+ }
+
+ return start;
+}
+
+static int
+ether1_open (struct net_device *dev)
+{
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+ printk(KERN_WARNING "%s: invalid ethernet MAC address\n",
+ dev->name);
+ return -EINVAL;
+ }
+
+ if (request_irq(dev->irq, ether1_interrupt, 0, "ether1", dev))
+ return -EAGAIN;
+
+ memset (&priv(dev)->stats, 0, sizeof (struct net_device_stats));
+
+ if (ether1_init_for_open (dev)) {
+ free_irq (dev->irq, dev);
+ return -EAGAIN;
+ }
+
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+static void
+ether1_timeout(struct net_device *dev)
+{
+ printk(KERN_WARNING "%s: transmit timeout, network cable problem?\n",
+ dev->name);
+ printk(KERN_WARNING "%s: resetting device\n", dev->name);
+
+ ether1_reset (dev);
+
+ if (ether1_init_for_open (dev))
+ printk (KERN_ERR "%s: unable to restart interface\n", dev->name);
+
+ priv(dev)->stats.tx_errors++;
+ netif_wake_queue(dev);
+}
+
+static int
+ether1_sendpacket (struct sk_buff *skb, struct net_device *dev)
+{
+ int tmp, tst, nopaddr, txaddr, tbdaddr, dataddr;
+ unsigned long flags;
+ tx_t tx;
+ tbd_t tbd;
+ nop_t nop;
+
+ if (priv(dev)->restart) {
+ printk(KERN_WARNING "%s: resetting device\n", dev->name);
+
+ ether1_reset(dev);
+
+ if (ether1_init_for_open(dev))
+ printk(KERN_ERR "%s: unable to restart interface\n", dev->name);
+ else
+ priv(dev)->restart = 0;
+ }
+
+ if (skb->len < ETH_ZLEN) {
+ skb = skb_padto(skb, ETH_ZLEN);
+ if (skb == NULL)
+ goto out;
+ }
+
+ /*
+ * insert packet followed by a nop
+ */
+ txaddr = ether1_txalloc (dev, TX_SIZE);
+ tbdaddr = ether1_txalloc (dev, TBD_SIZE);
+ dataddr = ether1_txalloc (dev, skb->len);
+ nopaddr = ether1_txalloc (dev, NOP_SIZE);
+
+ tx.tx_status = 0;
+ tx.tx_command = CMD_TX | CMD_INTR;
+ tx.tx_link = nopaddr;
+ tx.tx_tbdoffset = tbdaddr;
+ tbd.tbd_opts = TBD_EOL | skb->len;
+ tbd.tbd_link = I82586_NULL;
+ tbd.tbd_bufl = dataddr;
+ tbd.tbd_bufh = 0;
+ nop.nop_status = 0;
+ nop.nop_command = CMD_NOP;
+ nop.nop_link = nopaddr;
+
+ local_irq_save(flags);
+ ether1_writebuffer (dev, &tx, txaddr, TX_SIZE);
+ ether1_writebuffer (dev, &tbd, tbdaddr, TBD_SIZE);
+ ether1_writebuffer (dev, skb->data, dataddr, skb->len);
+ ether1_writebuffer (dev, &nop, nopaddr, NOP_SIZE);
+ tmp = priv(dev)->tx_link;
+ priv(dev)->tx_link = nopaddr;
+
+ /* now reset the previous nop pointer */
+ ether1_writew(dev, txaddr, tmp, nop_t, nop_link, NORMALIRQS);
+
+ local_irq_restore(flags);
+
+ /* handle transmit */
+ dev->trans_start = jiffies;
+
+ /* check to see if we have room for a full sized ether frame */
+ tmp = priv(dev)->tx_head;
+ tst = ether1_txalloc (dev, TX_SIZE + TBD_SIZE + NOP_SIZE + ETH_FRAME_LEN);
+ priv(dev)->tx_head = tmp;
+ dev_kfree_skb (skb);
+
+ if (tst == -1)
+ netif_stop_queue(dev);
+
+ out:
+ return 0;
+}
+
+static void
+ether1_xmit_done (struct net_device *dev)
+{
+ nop_t nop;
+ int caddr, tst;
+
+ caddr = priv(dev)->tx_tail;
+
+again:
+ ether1_readbuffer (dev, &nop, caddr, NOP_SIZE);
+
+ switch (nop.nop_command & CMD_MASK) {
+ case CMD_TDR:
+ /* special case */
+ if (ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS)
+ != (unsigned short)I82586_NULL) {
+ ether1_writew(dev, SCB_CMDCUCSTART | SCB_CMDRXSTART, SCB_ADDR, scb_t,
+ scb_command, NORMALIRQS);
+ writeb(CTRL_CA, REG_CONTROL);
+ }
+ priv(dev)->tx_tail = NOP_ADDR;
+ return;
+
+ case CMD_NOP:
+ if (nop.nop_link == caddr) {
+ if (priv(dev)->initialising == 0)
+ printk (KERN_WARNING "%s: strange command complete with no tx command!\n", dev->name);
+ else
+ priv(dev)->initialising = 0;
+ return;
+ }
+ if (caddr == nop.nop_link)
+ return;
+ caddr = nop.nop_link;
+ goto again;
+
+ case CMD_TX:
+ if (nop.nop_status & STAT_COMPLETE)
+ break;
+ printk (KERN_ERR "%s: strange command complete without completed command\n", dev->name);
+ priv(dev)->restart = 1;
+ return;
+
+ default:
+ printk (KERN_WARNING "%s: strange command %d complete! (offset %04X)", dev->name,
+ nop.nop_command & CMD_MASK, caddr);
+ priv(dev)->restart = 1;
+ return;
+ }
+
+ while (nop.nop_status & STAT_COMPLETE) {
+ if (nop.nop_status & STAT_OK) {
+ priv(dev)->stats.tx_packets ++;
+ priv(dev)->stats.collisions += (nop.nop_status & STAT_COLLISIONS);
+ } else {
+ priv(dev)->stats.tx_errors ++;
+
+ if (nop.nop_status & STAT_COLLAFTERTX)
+ priv(dev)->stats.collisions ++;
+ if (nop.nop_status & STAT_NOCARRIER)
+ priv(dev)->stats.tx_carrier_errors ++;
+ if (nop.nop_status & STAT_TXLOSTCTS)
+ printk (KERN_WARNING "%s: cts lost\n", dev->name);
+ if (nop.nop_status & STAT_TXSLOWDMA)
+ priv(dev)->stats.tx_fifo_errors ++;
+ if (nop.nop_status & STAT_COLLEXCESSIVE)
+ priv(dev)->stats.collisions += 16;
+ }
+
+ if (nop.nop_link == caddr) {
+ printk (KERN_ERR "%s: tx buffer chaining error: tx command points to itself\n", dev->name);
+ break;
+ }
+
+ caddr = nop.nop_link;
+ ether1_readbuffer (dev, &nop, caddr, NOP_SIZE);
+ if ((nop.nop_command & CMD_MASK) != CMD_NOP) {
+ printk (KERN_ERR "%s: tx buffer chaining error: no nop after tx command\n", dev->name);
+ break;
+ }
+
+ if (caddr == nop.nop_link)
+ break;
+
+ caddr = nop.nop_link;
+ ether1_readbuffer (dev, &nop, caddr, NOP_SIZE);
+ if ((nop.nop_command & CMD_MASK) != CMD_TX) {
+ printk (KERN_ERR "%s: tx buffer chaining error: no tx command after nop\n", dev->name);
+ break;
+ }
+ }
+ priv(dev)->tx_tail = caddr;
+
+ caddr = priv(dev)->tx_head;
+ tst = ether1_txalloc (dev, TX_SIZE + TBD_SIZE + NOP_SIZE + ETH_FRAME_LEN);
+ priv(dev)->tx_head = caddr;
+ if (tst != -1)
+ netif_wake_queue(dev);
+}
+
+static void
+ether1_recv_done (struct net_device *dev)
+{
+ int status;
+ int nexttail, rbdaddr;
+ rbd_t rbd;
+
+ do {
+ status = ether1_readw(dev, priv(dev)->rx_head, rfd_t, rfd_status, NORMALIRQS);
+ if ((status & RFD_COMPLETE) == 0)
+ break;
+
+ rbdaddr = ether1_readw(dev, priv(dev)->rx_head, rfd_t, rfd_rbdoffset, NORMALIRQS);
+ ether1_readbuffer (dev, &rbd, rbdaddr, RBD_SIZE);
+
+ if ((rbd.rbd_status & (RBD_EOF | RBD_ACNTVALID)) == (RBD_EOF | RBD_ACNTVALID)) {
+ int length = rbd.rbd_status & RBD_ACNT;
+ struct sk_buff *skb;
+
+ length = (length + 1) & ~1;
+ skb = dev_alloc_skb (length + 2);
+
+ if (skb) {
+ skb->dev = dev;
+ skb_reserve (skb, 2);
+
+ ether1_readbuffer (dev, skb_put (skb, length), rbd.rbd_bufl, length);
+
+ skb->protocol = eth_type_trans (skb, dev);
+ netif_rx (skb);
+ priv(dev)->stats.rx_packets ++;
+ } else
+ priv(dev)->stats.rx_dropped ++;
+ } else {
+ printk(KERN_WARNING "%s: %s\n", dev->name,
+ (rbd.rbd_status & RBD_EOF) ? "oversized packet" : "acnt not valid");
+ priv(dev)->stats.rx_dropped ++;
+ }
+
+ nexttail = ether1_readw(dev, priv(dev)->rx_tail, rfd_t, rfd_link, NORMALIRQS);
+ /* nexttail should be rx_head */
+ if (nexttail != priv(dev)->rx_head)
+ printk(KERN_ERR "%s: receiver buffer chaining error (%04X != %04X)\n",
+ dev->name, nexttail, priv(dev)->rx_head);
+ ether1_writew(dev, RFD_CMDEL | RFD_CMDSUSPEND, nexttail, rfd_t, rfd_command, NORMALIRQS);
+ ether1_writew(dev, 0, priv(dev)->rx_tail, rfd_t, rfd_command, NORMALIRQS);
+ ether1_writew(dev, 0, priv(dev)->rx_tail, rfd_t, rfd_status, NORMALIRQS);
+ ether1_writew(dev, 0, priv(dev)->rx_tail, rfd_t, rfd_rbdoffset, NORMALIRQS);
+
+ priv(dev)->rx_tail = nexttail;
+ priv(dev)->rx_head = ether1_readw(dev, priv(dev)->rx_head, rfd_t, rfd_link, NORMALIRQS);
+ } while (1);
+}
+
+static irqreturn_t
+ether1_interrupt (int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *)dev_id;
+ int status;
+
+ status = ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS);
+
+ if (status) {
+ ether1_writew(dev, status & (SCB_STRNR | SCB_STCNA | SCB_STFR | SCB_STCX),
+ SCB_ADDR, scb_t, scb_command, NORMALIRQS);
+ writeb(CTRL_CA | CTRL_ACK, REG_CONTROL);
+ if (status & SCB_STCX) {
+ ether1_xmit_done (dev);
+ }
+ if (status & SCB_STCNA) {
+ if (priv(dev)->resetting == 0)
+ printk (KERN_WARNING "%s: CU went not ready ???\n", dev->name);
+ else
+ priv(dev)->resetting += 1;
+ if (ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS)
+ != (unsigned short)I82586_NULL) {
+ ether1_writew(dev, SCB_CMDCUCSTART, SCB_ADDR, scb_t, scb_command, NORMALIRQS);
+ writeb(CTRL_CA, REG_CONTROL);
+ }
+ if (priv(dev)->resetting == 2)
+ priv(dev)->resetting = 0;
+ }
+ if (status & SCB_STFR) {
+ ether1_recv_done (dev);
+ }
+ if (status & SCB_STRNR) {
+ if (ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS) & SCB_STRXSUSP) {
+ printk (KERN_WARNING "%s: RU went not ready: RU suspended\n", dev->name);
+ ether1_writew(dev, SCB_CMDRXRESUME, SCB_ADDR, scb_t, scb_command, NORMALIRQS);
+ writeb(CTRL_CA, REG_CONTROL);
+ priv(dev)->stats.rx_dropped ++; /* we suspended due to lack of buffer space */
+ } else
+ printk(KERN_WARNING "%s: RU went not ready: %04X\n", dev->name,
+ ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS));
+ printk (KERN_WARNING "RU ptr = %04X\n", ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset,
+ NORMALIRQS));
+ }
+ } else
+ writeb(CTRL_ACK, REG_CONTROL);
+
+ return IRQ_HANDLED;
+}
+
+static int
+ether1_close (struct net_device *dev)
+{
+ ether1_reset (dev);
+
+ free_irq(dev->irq, dev);
+
+ return 0;
+}
+
+static struct net_device_stats *
+ether1_getstats (struct net_device *dev)
+{
+ return &priv(dev)->stats;
+}
+
+/*
+ * Set or clear the multicast filter for this adaptor.
+ * num_addrs == -1 Promiscuous mode, receive all packets.
+ * num_addrs == 0 Normal mode, clear multicast list.
+ * num_addrs > 0 Multicast mode, receive normal and MC packets, and do
+ * best-effort filtering.
+ */
+static void
+ether1_setmulticastlist (struct net_device *dev)
+{
+}
+
+/* ------------------------------------------------------------------------- */
+
+static void __init ether1_banner(void)
+{
+ static unsigned int version_printed = 0;
+
+ if (net_debug && version_printed++ == 0)
+ printk(KERN_INFO "%s", version);
+}
+
+static int __devinit
+ether1_probe(struct expansion_card *ec, const struct ecard_id *id)
+{
+ struct net_device *dev;
+ int i, ret = 0;
+
+ ether1_banner();
+
+ ret = ecard_request_resources(ec);
+ if (ret)
+ goto out;
+
+ dev = alloc_etherdev(sizeof(struct ether1_priv));
+ if (!dev) {
+ ret = -ENOMEM;
+ goto release;
+ }
+
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &ec->dev);
+
+ dev->irq = ec->irq;
+ priv(dev)->base = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST),
+ ecard_resource_len(ec, ECARD_RES_IOCFAST));
+ if (!priv(dev)->base) {
+ ret = -ENOMEM;
+ goto free;
+ }
+
+ if ((priv(dev)->bus_type = ether1_reset(dev)) == 0) {
+ ret = -ENODEV;
+ goto free;
+ }
+
+ for (i = 0; i < 6; i++)
+ dev->dev_addr[i] = readb(IDPROM_ADDRESS + (i << 2));
+
+ if (ether1_init_2(dev)) {
+ ret = -ENODEV;
+ goto free;
+ }
+
+ dev->open = ether1_open;
+ dev->stop = ether1_close;
+ dev->hard_start_xmit = ether1_sendpacket;
+ dev->get_stats = ether1_getstats;
+ dev->set_multicast_list = ether1_setmulticastlist;
+ dev->tx_timeout = ether1_timeout;
+ dev->watchdog_timeo = 5 * HZ / 100;
+
+ ret = register_netdev(dev);
+ if (ret)
+ goto free;
+
+ printk(KERN_INFO "%s: ether1 in slot %d, ",
+ dev->name, ec->slot_no);
+
+ for (i = 0; i < 6; i++)
+ printk ("%2.2x%c", dev->dev_addr[i], i == 5 ? '\n' : ':');
+
+ ecard_set_drvdata(ec, dev);
+ return 0;
+
+ free:
+ if (priv(dev)->base)
+ iounmap(priv(dev)->base);
+ free_netdev(dev);
+ release:
+ ecard_release_resources(ec);
+ out:
+ return ret;
+}
+
+static void __devexit ether1_remove(struct expansion_card *ec)
+{
+ struct net_device *dev = ecard_get_drvdata(ec);
+
+ ecard_set_drvdata(ec, NULL);
+
+ unregister_netdev(dev);
+ iounmap(priv(dev)->base);
+ free_netdev(dev);
+ ecard_release_resources(ec);
+}
+
+static const struct ecard_id ether1_ids[] = {
+ { MANU_ACORN, PROD_ACORN_ETHER1 },
+ { 0xffff, 0xffff }
+};
+
+static struct ecard_driver ether1_driver = {
+ .probe = ether1_probe,
+ .remove = __devexit_p(ether1_remove),
+ .id_table = ether1_ids,
+ .drv = {
+ .name = "ether1",
+ },
+};
+
+static int __init ether1_init(void)
+{
+ return ecard_register_driver(&ether1_driver);
+}
+
+static void __exit ether1_exit(void)
+{
+ ecard_remove_driver(&ether1_driver);
+}
+
+module_init(ether1_init);
+module_exit(ether1_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/arm/ether1.h b/drivers/net/arm/ether1.h
new file mode 100644
index 000000000000..c8a4b2389d85
--- /dev/null
+++ b/drivers/net/arm/ether1.h
@@ -0,0 +1,281 @@
+/*
+ * linux/drivers/acorn/net/ether1.h
+ *
+ * Copyright (C) 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Network driver for Acorn Ether1 cards.
+ */
+
+#ifndef _LINUX_ether1_H
+#define _LINUX_ether1_H
+
+#ifdef __ETHER1_C
+/* use 0 for production, 1 for verification, >2 for debug */
+#ifndef NET_DEBUG
+#define NET_DEBUG 0
+#endif
+
+#define priv(dev) ((struct ether1_priv *)netdev_priv(dev))
+
+/* Page register */
+#define REG_PAGE (priv(dev)->base + 0x0000)
+
+/* Control register */
+#define REG_CONTROL (priv(dev)->base + 0x0004)
+#define CTRL_RST 0x01
+#define CTRL_LOOPBACK 0x02
+#define CTRL_CA 0x04
+#define CTRL_ACK 0x08
+
+#define ETHER1_RAM (priv(dev)->base + 0x2000)
+
+/* HW address */
+#define IDPROM_ADDRESS (priv(dev)->base + 0x0024)
+
+struct ether1_priv {
+ void __iomem *base;
+ struct net_device_stats stats;
+ unsigned int tx_link;
+ unsigned int tx_head;
+ volatile unsigned int tx_tail;
+ volatile unsigned int rx_head;
+ volatile unsigned int rx_tail;
+ unsigned char bus_type;
+ unsigned char resetting;
+ unsigned char initialising : 1;
+ unsigned char restart : 1;
+};
+
+#define I82586_NULL (-1)
+
+typedef struct { /* tdr */
+ unsigned short tdr_status;
+ unsigned short tdr_command;
+ unsigned short tdr_link;
+ unsigned short tdr_result;
+#define TDR_TIME (0x7ff)
+#define TDR_SHORT (1 << 12)
+#define TDR_OPEN (1 << 13)
+#define TDR_XCVRPROB (1 << 14)
+#define TDR_LNKOK (1 << 15)
+} tdr_t;
+
+typedef struct { /* transmit */
+ unsigned short tx_status;
+ unsigned short tx_command;
+ unsigned short tx_link;
+ unsigned short tx_tbdoffset;
+} tx_t;
+
+typedef struct { /* tbd */
+ unsigned short tbd_opts;
+#define TBD_CNT (0x3fff)
+#define TBD_EOL (1 << 15)
+ unsigned short tbd_link;
+ unsigned short tbd_bufl;
+ unsigned short tbd_bufh;
+} tbd_t;
+
+typedef struct { /* rfd */
+ unsigned short rfd_status;
+#define RFD_NOEOF (1 << 6)
+#define RFD_FRAMESHORT (1 << 7)
+#define RFD_DMAOVRN (1 << 8)
+#define RFD_NORESOURCES (1 << 9)
+#define RFD_ALIGNERROR (1 << 10)
+#define RFD_CRCERROR (1 << 11)
+#define RFD_OK (1 << 13)
+#define RFD_FDCONSUMED (1 << 14)
+#define RFD_COMPLETE (1 << 15)
+ unsigned short rfd_command;
+#define RFD_CMDSUSPEND (1 << 14)
+#define RFD_CMDEL (1 << 15)
+ unsigned short rfd_link;
+ unsigned short rfd_rbdoffset;
+ unsigned char rfd_dest[6];
+ unsigned char rfd_src[6];
+ unsigned short rfd_len;
+} rfd_t;
+
+typedef struct { /* rbd */
+ unsigned short rbd_status;
+#define RBD_ACNT (0x3fff)
+#define RBD_ACNTVALID (1 << 14)
+#define RBD_EOF (1 << 15)
+ unsigned short rbd_link;
+ unsigned short rbd_bufl;
+ unsigned short rbd_bufh;
+ unsigned short rbd_len;
+} rbd_t;
+
+typedef struct { /* nop */
+ unsigned short nop_status;
+ unsigned short nop_command;
+ unsigned short nop_link;
+} nop_t;
+
+typedef struct { /* set multicast */
+ unsigned short mc_status;
+ unsigned short mc_command;
+ unsigned short mc_link;
+ unsigned short mc_cnt;
+ unsigned char mc_addrs[1][6];
+} mc_t;
+
+typedef struct { /* set address */
+ unsigned short sa_status;
+ unsigned short sa_command;
+ unsigned short sa_link;
+ unsigned char sa_addr[6];
+} sa_t;
+
+typedef struct { /* config command */
+ unsigned short cfg_status;
+ unsigned short cfg_command;
+ unsigned short cfg_link;
+ unsigned char cfg_bytecnt; /* size foll data: 4 - 12 */
+ unsigned char cfg_fifolim; /* FIFO threshold */
+ unsigned char cfg_byte8;
+#define CFG8_SRDY (1 << 6)
+#define CFG8_SAVEBADF (1 << 7)
+ unsigned char cfg_byte9;
+#define CFG9_ADDRLEN(x) (x)
+#define CFG9_ADDRLENBUF (1 << 3)
+#define CFG9_PREAMB2 (0 << 4)
+#define CFG9_PREAMB4 (1 << 4)
+#define CFG9_PREAMB8 (2 << 4)
+#define CFG9_PREAMB16 (3 << 4)
+#define CFG9_ILOOPBACK (1 << 6)
+#define CFG9_ELOOPBACK (1 << 7)
+ unsigned char cfg_byte10;
+#define CFG10_LINPRI(x) (x)
+#define CFG10_ACR(x) (x << 4)
+#define CFG10_BOFMET (1 << 7)
+ unsigned char cfg_ifs;
+ unsigned char cfg_slotl;
+ unsigned char cfg_byte13;
+#define CFG13_SLOTH(x) (x)
+#define CFG13_RETRY(x) (x << 4)
+ unsigned char cfg_byte14;
+#define CFG14_PROMISC (1 << 0)
+#define CFG14_DISBRD (1 << 1)
+#define CFG14_MANCH (1 << 2)
+#define CFG14_TNCRS (1 << 3)
+#define CFG14_NOCRC (1 << 4)
+#define CFG14_CRC16 (1 << 5)
+#define CFG14_BTSTF (1 << 6)
+#define CFG14_FLGPAD (1 << 7)
+ unsigned char cfg_byte15;
+#define CFG15_CSTF(x) (x)
+#define CFG15_ICSS (1 << 3)
+#define CFG15_CDTF(x) (x << 4)
+#define CFG15_ICDS (1 << 7)
+ unsigned short cfg_minfrmlen;
+} cfg_t;
+
+typedef struct { /* scb */
+ unsigned short scb_status; /* status of 82586 */
+#define SCB_STRXMASK (7 << 4) /* Receive unit status */
+#define SCB_STRXIDLE (0 << 4) /* Idle */
+#define SCB_STRXSUSP (1 << 4) /* Suspended */
+#define SCB_STRXNRES (2 << 4) /* No resources */
+#define SCB_STRXRDY (4 << 4) /* Ready */
+#define SCB_STCUMASK (7 << 8) /* Command unit status */
+#define SCB_STCUIDLE (0 << 8) /* Idle */
+#define SCB_STCUSUSP (1 << 8) /* Suspended */
+#define SCB_STCUACTV (2 << 8) /* Active */
+#define SCB_STRNR (1 << 12) /* Receive unit not ready */
+#define SCB_STCNA (1 << 13) /* Command unit not ready */
+#define SCB_STFR (1 << 14) /* Frame received */
+#define SCB_STCX (1 << 15) /* Command completed */
+ unsigned short scb_command; /* Next command */
+#define SCB_CMDRXSTART (1 << 4) /* Start (at rfa_offset) */
+#define SCB_CMDRXRESUME (2 << 4) /* Resume reception */
+#define SCB_CMDRXSUSPEND (3 << 4) /* Suspend reception */
+#define SCB_CMDRXABORT (4 << 4) /* Abort reception */
+#define SCB_CMDCUCSTART (1 << 8) /* Start (at cbl_offset) */
+#define SCB_CMDCUCRESUME (2 << 8) /* Resume execution */
+#define SCB_CMDCUCSUSPEND (3 << 8) /* Suspend execution */
+#define SCB_CMDCUCABORT (4 << 8) /* Abort execution */
+#define SCB_CMDACKRNR (1 << 12) /* Ack RU not ready */
+#define SCB_CMDACKCNA (1 << 13) /* Ack CU not ready */
+#define SCB_CMDACKFR (1 << 14) /* Ack Frame received */
+#define SCB_CMDACKCX (1 << 15) /* Ack Command complete */
+ unsigned short scb_cbl_offset; /* Offset of first command unit */
+ unsigned short scb_rfa_offset; /* Offset of first receive frame area */
+ unsigned short scb_crc_errors; /* Properly aligned frame with CRC error*/
+ unsigned short scb_aln_errors; /* Misaligned frames */
+ unsigned short scb_rsc_errors; /* Frames lost due to no space */
+ unsigned short scb_ovn_errors; /* Frames lost due to slow bus */
+} scb_t;
+
+typedef struct { /* iscp */
+ unsigned short iscp_busy; /* set by CPU before CA */
+ unsigned short iscp_offset; /* offset of SCB */
+ unsigned short iscp_basel; /* base of SCB */
+ unsigned short iscp_baseh;
+} iscp_t;
+
+ /* this address must be 0xfff6 */
+typedef struct { /* scp */
+ unsigned short scp_sysbus; /* bus size */
+#define SCP_SY_16BBUS 0x00
+#define SCP_SY_8BBUS 0x01
+ unsigned short scp_junk[2]; /* junk */
+ unsigned short scp_iscpl; /* lower 16 bits of iscp */
+ unsigned short scp_iscph; /* upper 16 bits of iscp */
+} scp_t;
+
+/* commands */
+#define CMD_NOP 0
+#define CMD_SETADDRESS 1
+#define CMD_CONFIG 2
+#define CMD_SETMULTICAST 3
+#define CMD_TX 4
+#define CMD_TDR 5
+#define CMD_DUMP 6
+#define CMD_DIAGNOSE 7
+
+#define CMD_MASK 7
+
+#define CMD_INTR (1 << 13)
+#define CMD_SUSP (1 << 14)
+#define CMD_EOL (1 << 15)
+
+#define STAT_COLLISIONS (15)
+#define STAT_COLLEXCESSIVE (1 << 5)
+#define STAT_COLLAFTERTX (1 << 6)
+#define STAT_TXDEFERRED (1 << 7)
+#define STAT_TXSLOWDMA (1 << 8)
+#define STAT_TXLOSTCTS (1 << 9)
+#define STAT_NOCARRIER (1 << 10)
+#define STAT_FAIL (1 << 11)
+#define STAT_ABORTED (1 << 12)
+#define STAT_OK (1 << 13)
+#define STAT_BUSY (1 << 14)
+#define STAT_COMPLETE (1 << 15)
+#endif
+#endif
+
+/*
+ * Ether1 card definitions:
+ *
+ * FAST accesses:
+ * +0 Page register
+ * 16 pages
+ * +4 Control
+ * '1' = reset
+ * '2' = loopback
+ * '4' = CA
+ * '8' = int ack
+ *
+ * RAM at address + 0x2000
+ * Pod. Prod id = 3
+ * Words after ID block [base + 8 words]
+ * +0 pcb issue (0x0c and 0xf3 invalid)
+ * +1 - +6 eth hw address
+ */
diff --git a/drivers/net/arm/ether3.c b/drivers/net/arm/ether3.c
new file mode 100644
index 000000000000..1cc53abc3a39
--- /dev/null
+++ b/drivers/net/arm/ether3.c
@@ -0,0 +1,936 @@
+/*
+ * linux/drivers/acorn/net/ether3.c
+ *
+ * Copyright (C) 1995-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * SEEQ nq8005 ethernet driver for Acorn/ANT Ether3 card
+ * for Acorn machines
+ *
+ * By Russell King, with some suggestions from borris@ant.co.uk
+ *
+ * Changelog:
+ * 1.04 RMK 29/02/1996 Won't pass packets that are from our ethernet
+ * address up to the higher levels - they're
+ * silently ignored. I/F can now be put into
+ * multicast mode. Receiver routine optimised.
+ * 1.05 RMK 30/02/1996 Now claims interrupt at open when part of
+ * the kernel rather than when a module.
+ * 1.06 RMK 02/03/1996 Various code cleanups
+ * 1.07 RMK 13/10/1996 Optimised interrupt routine and transmit
+ * routines.
+ * 1.08 RMK 14/10/1996 Fixed problem with too many packets,
+ * prevented the kernel message about dropped
+ * packets appearing too many times a second.
+ * Now does not disable all IRQs, only the IRQ
+ * used by this card.
+ * 1.09 RMK 10/11/1996 Only enables TX irq when buffer space is low,
+ * but we still service the TX queue if we get a
+ * RX interrupt.
+ * 1.10 RMK 15/07/1997 Fixed autoprobing of NQ8004.
+ * 1.11 RMK 16/11/1997 Fixed autoprobing of NQ8005A.
+ * 1.12 RMK 31/12/1997 Removed reference to dev_tint for Linux 2.1.
+ * RMK 27/06/1998 Changed asm/delay.h to linux/delay.h.
+ * 1.13 RMK 29/06/1998 Fixed problem with transmission of packets.
+ * Chip seems to have a bug in, whereby if the
+ * packet starts two bytes from the end of the
+ * buffer, it corrupts the receiver chain, and
+ * never updates the transmit status correctly.
+ * 1.14 RMK 07/01/1998 Added initial code for ETHERB addressing.
+ * 1.15 RMK 30/04/1999 More fixes to the transmit routine for buggy
+ * hardware.
+ * 1.16 RMK 10/02/2000 Updated for 2.3.43
+ * 1.17 RMK 13/05/2000 Updated for 2.3.99-pre8
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+
+#include <asm/system.h>
+#include <asm/ecard.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+static char version[] __initdata = "ether3 ethernet driver (c) 1995-2000 R.M.King v1.17\n";
+
+#include "ether3.h"
+
+static unsigned int net_debug = NET_DEBUG;
+
+static void ether3_setmulticastlist(struct net_device *dev);
+static int ether3_rx(struct net_device *dev, unsigned int maxcnt);
+static void ether3_tx(struct net_device *dev);
+static int ether3_open (struct net_device *dev);
+static int ether3_sendpacket (struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t ether3_interrupt (int irq, void *dev_id, struct pt_regs *regs);
+static int ether3_close (struct net_device *dev);
+static struct net_device_stats *ether3_getstats (struct net_device *dev);
+static void ether3_setmulticastlist (struct net_device *dev);
+static void ether3_timeout(struct net_device *dev);
+
+#define BUS_16 2
+#define BUS_8 1
+#define BUS_UNKNOWN 0
+
+/* --------------------------------------------------------------------------- */
+
+typedef enum {
+ buffer_write,
+ buffer_read
+} buffer_rw_t;
+
+/*
+ * ether3 read/write. Slow things down a bit...
+ * The SEEQ8005 doesn't like us writing to its registers
+ * too quickly.
+ */
+static inline void ether3_outb(int v, const void __iomem *r)
+{
+ writeb(v, r);
+ udelay(1);
+}
+
+static inline void ether3_outw(int v, const void __iomem *r)
+{
+ writew(v, r);
+ udelay(1);
+}
+#define ether3_inb(r) ({ unsigned int __v = readb((r)); udelay(1); __v; })
+#define ether3_inw(r) ({ unsigned int __v = readw((r)); udelay(1); __v; })
+
+static int
+ether3_setbuffer(struct net_device *dev, buffer_rw_t read, int start)
+{
+ int timeout = 1000;
+
+ ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1);
+ ether3_outw(priv(dev)->regs.command | CMD_FIFOWRITE, REG_COMMAND);
+
+ while ((ether3_inw(REG_STATUS) & STAT_FIFOEMPTY) == 0) {
+ if (!timeout--) {
+ printk("%s: setbuffer broken\n", dev->name);
+ priv(dev)->broken = 1;
+ return 1;
+ }
+ udelay(1);
+ }
+
+ if (read == buffer_read) {
+ ether3_outw(start, REG_DMAADDR);
+ ether3_outw(priv(dev)->regs.command | CMD_FIFOREAD, REG_COMMAND);
+ } else {
+ ether3_outw(priv(dev)->regs.command | CMD_FIFOWRITE, REG_COMMAND);
+ ether3_outw(start, REG_DMAADDR);
+ }
+ return 0;
+}
+
+/*
+ * write data to the buffer memory
+ */
+#define ether3_writebuffer(dev,data,length) \
+ writesw(REG_BUFWIN, (data), (length) >> 1)
+
+#define ether3_writeword(dev,data) \
+ writew((data), REG_BUFWIN)
+
+#define ether3_writelong(dev,data) { \
+ void __iomem *reg_bufwin = REG_BUFWIN; \
+ writew((data), reg_bufwin); \
+ writew((data) >> 16, reg_bufwin); \
+}
+
+/*
+ * read data from the buffer memory
+ */
+#define ether3_readbuffer(dev,data,length) \
+ readsw(REG_BUFWIN, (data), (length) >> 1)
+
+#define ether3_readword(dev) \
+ readw(REG_BUFWIN)
+
+#define ether3_readlong(dev) \
+ readw(REG_BUFWIN) | (readw(REG_BUFWIN) << 16)
+
+/*
+ * Switch LED off...
+ */
+static void ether3_ledoff(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *)data;
+ ether3_outw(priv(dev)->regs.config2 |= CFG2_CTRLO, REG_CONFIG2);
+}
+
+/*
+ * switch LED on...
+ */
+static inline void ether3_ledon(struct net_device *dev)
+{
+ del_timer(&priv(dev)->timer);
+ priv(dev)->timer.expires = jiffies + HZ / 50; /* leave on for 1/50th second */
+ priv(dev)->timer.data = (unsigned long)dev;
+ priv(dev)->timer.function = ether3_ledoff;
+ add_timer(&priv(dev)->timer);
+ if (priv(dev)->regs.config2 & CFG2_CTRLO)
+ ether3_outw(priv(dev)->regs.config2 &= ~CFG2_CTRLO, REG_CONFIG2);
+}
+
+/*
+ * Read the ethernet address string from the on board rom.
+ * This is an ascii string!!!
+ */
+static int __init
+ether3_addr(char *addr, struct expansion_card *ec)
+{
+ struct in_chunk_dir cd;
+ char *s;
+
+ if (ecard_readchunk(&cd, ec, 0xf5, 0) && (s = strchr(cd.d.string, '('))) {
+ int i;
+ for (i = 0; i<6; i++) {
+ addr[i] = simple_strtoul(s + 1, &s, 0x10);
+ if (*s != (i==5?')' : ':' ))
+ break;
+ }
+ if (i == 6)
+ return 0;
+ }
+ /* I wonder if we should even let the user continue in this case
+ * - no, it would be better to disable the device
+ */
+ printk(KERN_ERR "ether3: Couldn't read a valid MAC address from card.\n");
+ return -ENODEV;
+}
+
+/* --------------------------------------------------------------------------- */
+
+static int __init
+ether3_ramtest(struct net_device *dev, unsigned char byte)
+{
+ unsigned char *buffer = kmalloc(RX_END, GFP_KERNEL);
+ int i,ret = 0;
+ int max_errors = 4;
+ int bad = -1;
+
+ if (!buffer)
+ return 1;
+
+ memset(buffer, byte, RX_END);
+ ether3_setbuffer(dev, buffer_write, 0);
+ ether3_writebuffer(dev, buffer, TX_END);
+ ether3_setbuffer(dev, buffer_write, RX_START);
+ ether3_writebuffer(dev, buffer + RX_START, RX_LEN);
+ memset(buffer, byte ^ 0xff, RX_END);
+ ether3_setbuffer(dev, buffer_read, 0);
+ ether3_readbuffer(dev, buffer, TX_END);
+ ether3_setbuffer(dev, buffer_read, RX_START);
+ ether3_readbuffer(dev, buffer + RX_START, RX_LEN);
+
+ for (i = 0; i < RX_END; i++) {
+ if (buffer[i] != byte) {
+ if (max_errors > 0 && bad != buffer[i]) {
+ printk("%s: RAM failed with (%02X instead of %02X) at 0x%04X",
+ dev->name, buffer[i], byte, i);
+ ret = 2;
+ max_errors--;
+ bad = i;
+ }
+ } else {
+ if (bad != -1) {
+ if (bad != i - 1)
+ printk(" - 0x%04X\n", i - 1);
+ printk("\n");
+ bad = -1;
+ }
+ }
+ }
+ if (bad != -1)
+ printk(" - 0xffff\n");
+ kfree(buffer);
+
+ return ret;
+}
+
+/* ------------------------------------------------------------------------------- */
+
+static int __init ether3_init_2(struct net_device *dev)
+{
+ int i;
+
+ priv(dev)->regs.config1 = CFG1_RECVCOMPSTAT0|CFG1_DMABURST8;
+ priv(dev)->regs.config2 = CFG2_CTRLO|CFG2_RECVCRC|CFG2_ERRENCRC;
+ priv(dev)->regs.command = 0;
+
+ /*
+ * Set up our hardware address
+ */
+ ether3_outw(priv(dev)->regs.config1 | CFG1_BUFSELSTAT0, REG_CONFIG1);
+ for (i = 0; i < 6; i++)
+ ether3_outb(dev->dev_addr[i], REG_BUFWIN);
+
+ if (dev->flags & IFF_PROMISC)
+ priv(dev)->regs.config1 |= CFG1_RECVPROMISC;
+ else if (dev->flags & IFF_MULTICAST)
+ priv(dev)->regs.config1 |= CFG1_RECVSPECBRMULTI;
+ else
+ priv(dev)->regs.config1 |= CFG1_RECVSPECBROAD;
+
+ /*
+ * There is a problem with the NQ8005 in that it occasionally loses the
+ * last two bytes. To get round this problem, we receive the CRC as
+ * well. That way, if we do lose the last two, then it doesn't matter.
+ */
+ ether3_outw(priv(dev)->regs.config1 | CFG1_TRANSEND, REG_CONFIG1);
+ ether3_outw((TX_END>>8) - 1, REG_BUFWIN);
+ ether3_outw(priv(dev)->rx_head, REG_RECVPTR);
+ ether3_outw(0, REG_TRANSMITPTR);
+ ether3_outw(priv(dev)->rx_head >> 8, REG_RECVEND);
+ ether3_outw(priv(dev)->regs.config2, REG_CONFIG2);
+ ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1);
+ ether3_outw(priv(dev)->regs.command, REG_COMMAND);
+
+ i = ether3_ramtest(dev, 0x5A);
+ if(i)
+ return i;
+ i = ether3_ramtest(dev, 0x1E);
+ if(i)
+ return i;
+
+ ether3_setbuffer(dev, buffer_write, 0);
+ ether3_writelong(dev, 0);
+ return 0;
+}
+
+static void
+ether3_init_for_open(struct net_device *dev)
+{
+ int i;
+
+ memset(&priv(dev)->stats, 0, sizeof(struct net_device_stats));
+
+ /* Reset the chip */
+ ether3_outw(CFG2_RESET, REG_CONFIG2);
+ udelay(4);
+
+ priv(dev)->regs.command = 0;
+ ether3_outw(CMD_RXOFF|CMD_TXOFF, REG_COMMAND);
+ while (ether3_inw(REG_STATUS) & (STAT_RXON|STAT_TXON))
+ barrier();
+
+ ether3_outw(priv(dev)->regs.config1 | CFG1_BUFSELSTAT0, REG_CONFIG1);
+ for (i = 0; i < 6; i++)
+ ether3_outb(dev->dev_addr[i], REG_BUFWIN);
+
+ priv(dev)->tx_head = 0;
+ priv(dev)->tx_tail = 0;
+ priv(dev)->regs.config2 |= CFG2_CTRLO;
+ priv(dev)->rx_head = RX_START;
+
+ ether3_outw(priv(dev)->regs.config1 | CFG1_TRANSEND, REG_CONFIG1);
+ ether3_outw((TX_END>>8) - 1, REG_BUFWIN);
+ ether3_outw(priv(dev)->rx_head, REG_RECVPTR);
+ ether3_outw(priv(dev)->rx_head >> 8, REG_RECVEND);
+ ether3_outw(0, REG_TRANSMITPTR);
+ ether3_outw(priv(dev)->regs.config2, REG_CONFIG2);
+ ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1);
+
+ ether3_setbuffer(dev, buffer_write, 0);
+ ether3_writelong(dev, 0);
+
+ priv(dev)->regs.command = CMD_ENINTRX | CMD_ENINTTX;
+ ether3_outw(priv(dev)->regs.command | CMD_RXON, REG_COMMAND);
+}
+
+static inline int
+ether3_probe_bus_8(struct net_device *dev, int val)
+{
+ int write_low, write_high, read_low, read_high;
+
+ write_low = val & 255;
+ write_high = val >> 8;
+
+ printk(KERN_DEBUG "ether3_probe: write8 [%02X:%02X]", write_high, write_low);
+
+ ether3_outb(write_low, REG_RECVPTR);
+ ether3_outb(write_high, REG_RECVPTR + 4);
+
+ read_low = ether3_inb(REG_RECVPTR);
+ read_high = ether3_inb(REG_RECVPTR + 4);
+
+ printk(", read8 [%02X:%02X]\n", read_high, read_low);
+
+ return read_low == write_low && read_high == write_high;
+}
+
+static inline int
+ether3_probe_bus_16(struct net_device *dev, int val)
+{
+ int read_val;
+
+ ether3_outw(val, REG_RECVPTR);
+ read_val = ether3_inw(REG_RECVPTR);
+
+ printk(KERN_DEBUG "ether3_probe: write16 [%04X], read16 [%04X]\n", val, read_val);
+
+ return read_val == val;
+}
+
+/*
+ * Open/initialize the board. This is called (in the current kernel)
+ * sometime after booting when the 'ifconfig' program is run.
+ *
+ * This routine should set everything up anew at each open, even
+ * registers that "should" only need to be set once at boot, so that
+ * there is non-reboot way to recover if something goes wrong.
+ */
+static int
+ether3_open(struct net_device *dev)
+{
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+ printk(KERN_WARNING "%s: invalid ethernet MAC address\n",
+ dev->name);
+ return -EINVAL;
+ }
+
+ if (request_irq(dev->irq, ether3_interrupt, 0, "ether3", dev))
+ return -EAGAIN;
+
+ ether3_init_for_open(dev);
+
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+/*
+ * The inverse routine to ether3_open().
+ */
+static int
+ether3_close(struct net_device *dev)
+{
+ netif_stop_queue(dev);
+
+ disable_irq(dev->irq);
+
+ ether3_outw(CMD_RXOFF|CMD_TXOFF, REG_COMMAND);
+ priv(dev)->regs.command = 0;
+ while (ether3_inw(REG_STATUS) & (STAT_RXON|STAT_TXON))
+ barrier();
+ ether3_outb(0x80, REG_CONFIG2 + 4);
+ ether3_outw(0, REG_COMMAND);
+
+ free_irq(dev->irq, dev);
+
+ return 0;
+}
+
+/*
+ * Get the current statistics. This may be called with the card open or
+ * closed.
+ */
+static struct net_device_stats *ether3_getstats(struct net_device *dev)
+{
+ return &priv(dev)->stats;
+}
+
+/*
+ * Set or clear promiscuous/multicast mode filter for this adaptor.
+ *
+ * We don't attempt any packet filtering. The card may have a SEEQ 8004
+ * in which does not have the other ethernet address registers present...
+ */
+static void ether3_setmulticastlist(struct net_device *dev)
+{
+ priv(dev)->regs.config1 &= ~CFG1_RECVPROMISC;
+
+ if (dev->flags & IFF_PROMISC) {
+ /* promiscuous mode */
+ priv(dev)->regs.config1 |= CFG1_RECVPROMISC;
+ } else if (dev->flags & IFF_ALLMULTI) {
+ priv(dev)->regs.config1 |= CFG1_RECVSPECBRMULTI;
+ } else
+ priv(dev)->regs.config1 |= CFG1_RECVSPECBROAD;
+
+ ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1);
+}
+
+static void ether3_timeout(struct net_device *dev)
+{
+ unsigned long flags;
+
+ del_timer(&priv(dev)->timer);
+
+ local_irq_save(flags);
+ printk(KERN_ERR "%s: transmit timed out, network cable problem?\n", dev->name);
+ printk(KERN_ERR "%s: state: { status=%04X cfg1=%04X cfg2=%04X }\n", dev->name,
+ ether3_inw(REG_STATUS), ether3_inw(REG_CONFIG1), ether3_inw(REG_CONFIG2));
+ printk(KERN_ERR "%s: { rpr=%04X rea=%04X tpr=%04X }\n", dev->name,
+ ether3_inw(REG_RECVPTR), ether3_inw(REG_RECVEND), ether3_inw(REG_TRANSMITPTR));
+ printk(KERN_ERR "%s: tx head=%X tx tail=%X\n", dev->name,
+ priv(dev)->tx_head, priv(dev)->tx_tail);
+ ether3_setbuffer(dev, buffer_read, priv(dev)->tx_tail);
+ printk(KERN_ERR "%s: packet status = %08X\n", dev->name, ether3_readlong(dev));
+ local_irq_restore(flags);
+
+ priv(dev)->regs.config2 |= CFG2_CTRLO;
+ priv(dev)->stats.tx_errors += 1;
+ ether3_outw(priv(dev)->regs.config2, REG_CONFIG2);
+ priv(dev)->tx_head = priv(dev)->tx_tail = 0;
+
+ netif_wake_queue(dev);
+}
+
+/*
+ * Transmit a packet
+ */
+static int
+ether3_sendpacket(struct sk_buff *skb, struct net_device *dev)
+{
+ unsigned long flags;
+ unsigned int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
+ unsigned int ptr, next_ptr;
+
+ if (priv(dev)->broken) {
+ dev_kfree_skb(skb);
+ priv(dev)->stats.tx_dropped ++;
+ netif_start_queue(dev);
+ return 0;
+ }
+
+ length = (length + 1) & ~1;
+ if (length != skb->len) {
+ skb = skb_padto(skb, length);
+ if (skb == NULL)
+ goto out;
+ }
+
+ next_ptr = (priv(dev)->tx_head + 1) & 15;
+
+ local_irq_save(flags);
+
+ if (priv(dev)->tx_tail == next_ptr) {
+ local_irq_restore(flags);
+ return 1; /* unable to queue */
+ }
+
+ dev->trans_start = jiffies;
+ ptr = 0x600 * priv(dev)->tx_head;
+ priv(dev)->tx_head = next_ptr;
+ next_ptr *= 0x600;
+
+#define TXHDR_FLAGS (TXHDR_TRANSMIT|TXHDR_CHAINCONTINUE|TXHDR_DATAFOLLOWS|TXHDR_ENSUCCESS)
+
+ ether3_setbuffer(dev, buffer_write, next_ptr);
+ ether3_writelong(dev, 0);
+ ether3_setbuffer(dev, buffer_write, ptr);
+ ether3_writelong(dev, 0);
+ ether3_writebuffer(dev, skb->data, length);
+ ether3_writeword(dev, htons(next_ptr));
+ ether3_writeword(dev, TXHDR_CHAINCONTINUE >> 16);
+ ether3_setbuffer(dev, buffer_write, ptr);
+ ether3_writeword(dev, htons((ptr + length + 4)));
+ ether3_writeword(dev, TXHDR_FLAGS >> 16);
+ ether3_ledon(dev);
+
+ if (!(ether3_inw(REG_STATUS) & STAT_TXON)) {
+ ether3_outw(ptr, REG_TRANSMITPTR);
+ ether3_outw(priv(dev)->regs.command | CMD_TXON, REG_COMMAND);
+ }
+
+ next_ptr = (priv(dev)->tx_head + 1) & 15;
+ local_irq_restore(flags);
+
+ dev_kfree_skb(skb);
+
+ if (priv(dev)->tx_tail == next_ptr)
+ netif_stop_queue(dev);
+
+ out:
+ return 0;
+}
+
+static irqreturn_t
+ether3_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *)dev_id;
+ unsigned int status, handled = IRQ_NONE;
+
+#if NET_DEBUG > 1
+ if(net_debug & DEBUG_INT)
+ printk("eth3irq: %d ", irq);
+#endif
+
+ status = ether3_inw(REG_STATUS);
+
+ if (status & STAT_INTRX) {
+ ether3_outw(CMD_ACKINTRX | priv(dev)->regs.command, REG_COMMAND);
+ ether3_rx(dev, 12);
+ handled = IRQ_HANDLED;
+ }
+
+ if (status & STAT_INTTX) {
+ ether3_outw(CMD_ACKINTTX | priv(dev)->regs.command, REG_COMMAND);
+ ether3_tx(dev);
+ handled = IRQ_HANDLED;
+ }
+
+#if NET_DEBUG > 1
+ if(net_debug & DEBUG_INT)
+ printk("done\n");
+#endif
+ return handled;
+}
+
+/*
+ * If we have a good packet(s), get it/them out of the buffers.
+ */
+static int ether3_rx(struct net_device *dev, unsigned int maxcnt)
+{
+ unsigned int next_ptr = priv(dev)->rx_head, received = 0;
+
+ ether3_ledon(dev);
+
+ do {
+ unsigned int this_ptr, status;
+ unsigned char addrs[16];
+
+ /*
+ * read the first 16 bytes from the buffer.
+ * This contains the status bytes etc and ethernet addresses,
+ * and we also check the source ethernet address to see if
+ * it originated from us.
+ */
+ {
+ unsigned int temp_ptr;
+ ether3_setbuffer(dev, buffer_read, next_ptr);
+ temp_ptr = ether3_readword(dev);
+ status = ether3_readword(dev);
+ if ((status & (RXSTAT_DONE | RXHDR_CHAINCONTINUE | RXHDR_RECEIVE)) !=
+ (RXSTAT_DONE | RXHDR_CHAINCONTINUE) || !temp_ptr)
+ break;
+
+ this_ptr = next_ptr + 4;
+ next_ptr = ntohs(temp_ptr);
+ }
+ ether3_setbuffer(dev, buffer_read, this_ptr);
+ ether3_readbuffer(dev, addrs+2, 12);
+
+if (next_ptr < RX_START || next_ptr >= RX_END) {
+ int i;
+ printk("%s: bad next pointer @%04X: ", dev->name, priv(dev)->rx_head);
+ printk("%02X %02X %02X %02X ", next_ptr >> 8, next_ptr & 255, status & 255, status >> 8);
+ for (i = 2; i < 14; i++)
+ printk("%02X ", addrs[i]);
+ printk("\n");
+ next_ptr = priv(dev)->rx_head;
+ break;
+}
+ /*
+ * ignore our own packets...
+ */
+ if (!(*(unsigned long *)&dev->dev_addr[0] ^ *(unsigned long *)&addrs[2+6]) &&
+ !(*(unsigned short *)&dev->dev_addr[4] ^ *(unsigned short *)&addrs[2+10])) {
+ maxcnt ++; /* compensate for loopedback packet */
+ ether3_outw(next_ptr >> 8, REG_RECVEND);
+ } else
+ if (!(status & (RXSTAT_OVERSIZE|RXSTAT_CRCERROR|RXSTAT_DRIBBLEERROR|RXSTAT_SHORTPACKET))) {
+ unsigned int length = next_ptr - this_ptr;
+ struct sk_buff *skb;
+
+ if (next_ptr <= this_ptr)
+ length += RX_END - RX_START;
+
+ skb = dev_alloc_skb(length + 2);
+ if (skb) {
+ unsigned char *buf;
+
+ skb->dev = dev;
+ skb_reserve(skb, 2);
+ buf = skb_put(skb, length);
+ ether3_readbuffer(dev, buf + 12, length - 12);
+ ether3_outw(next_ptr >> 8, REG_RECVEND);
+ *(unsigned short *)(buf + 0) = *(unsigned short *)(addrs + 2);
+ *(unsigned long *)(buf + 2) = *(unsigned long *)(addrs + 4);
+ *(unsigned long *)(buf + 6) = *(unsigned long *)(addrs + 8);
+ *(unsigned short *)(buf + 10) = *(unsigned short *)(addrs + 12);
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+ received ++;
+ } else
+ goto dropping;
+ } else {
+ struct net_device_stats *stats = &priv(dev)->stats;
+ ether3_outw(next_ptr >> 8, REG_RECVEND);
+ if (status & RXSTAT_OVERSIZE) stats->rx_over_errors ++;
+ if (status & RXSTAT_CRCERROR) stats->rx_crc_errors ++;
+ if (status & RXSTAT_DRIBBLEERROR) stats->rx_fifo_errors ++;
+ if (status & RXSTAT_SHORTPACKET) stats->rx_length_errors ++;
+ stats->rx_errors++;
+ }
+ }
+ while (-- maxcnt);
+
+done:
+ priv(dev)->stats.rx_packets += received;
+ priv(dev)->rx_head = next_ptr;
+ /*
+ * If rx went off line, then that means that the buffer may be full. We
+ * have dropped at least one packet.
+ */
+ if (!(ether3_inw(REG_STATUS) & STAT_RXON)) {
+ priv(dev)->stats.rx_dropped ++;
+ ether3_outw(next_ptr, REG_RECVPTR);
+ ether3_outw(priv(dev)->regs.command | CMD_RXON, REG_COMMAND);
+ }
+
+ return maxcnt;
+
+dropping:{
+ static unsigned long last_warned;
+
+ ether3_outw(next_ptr >> 8, REG_RECVEND);
+ /*
+ * Don't print this message too many times...
+ */
+ if (time_after(jiffies, last_warned + 10 * HZ)) {
+ last_warned = jiffies;
+ printk("%s: memory squeeze, dropping packet.\n", dev->name);
+ }
+ priv(dev)->stats.rx_dropped ++;
+ goto done;
+ }
+}
+
+/*
+ * Update stats for the transmitted packet(s)
+ */
+static void ether3_tx(struct net_device *dev)
+{
+ unsigned int tx_tail = priv(dev)->tx_tail;
+ int max_work = 14;
+
+ do {
+ unsigned long status;
+
+ /*
+ * Read the packet header
+ */
+ ether3_setbuffer(dev, buffer_read, tx_tail * 0x600);
+ status = ether3_readlong(dev);
+
+ /*
+ * Check to see if this packet has been transmitted
+ */
+ if ((status & (TXSTAT_DONE | TXHDR_TRANSMIT)) !=
+ (TXSTAT_DONE | TXHDR_TRANSMIT))
+ break;
+
+ /*
+ * Update errors
+ */
+ if (!(status & (TXSTAT_BABBLED | TXSTAT_16COLLISIONS)))
+ priv(dev)->stats.tx_packets++;
+ else {
+ priv(dev)->stats.tx_errors ++;
+ if (status & TXSTAT_16COLLISIONS)
+ priv(dev)->stats.collisions += 16;
+ if (status & TXSTAT_BABBLED)
+ priv(dev)->stats.tx_fifo_errors ++;
+ }
+
+ tx_tail = (tx_tail + 1) & 15;
+ } while (--max_work);
+
+ if (priv(dev)->tx_tail != tx_tail) {
+ priv(dev)->tx_tail = tx_tail;
+ netif_wake_queue(dev);
+ }
+}
+
+static void __init ether3_banner(void)
+{
+ static unsigned version_printed = 0;
+
+ if (net_debug && version_printed++ == 0)
+ printk(KERN_INFO "%s", version);
+}
+
+static int __devinit
+ether3_probe(struct expansion_card *ec, const struct ecard_id *id)
+{
+ const struct ether3_data *data = id->data;
+ struct net_device *dev;
+ int i, bus_type, ret;
+
+ ether3_banner();
+
+ ret = ecard_request_resources(ec);
+ if (ret)
+ goto out;
+
+ dev = alloc_etherdev(sizeof(struct dev_priv));
+ if (!dev) {
+ ret = -ENOMEM;
+ goto release;
+ }
+
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &ec->dev);
+
+ priv(dev)->base = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC),
+ ecard_resource_len(ec, ECARD_RES_MEMC));
+ if (!priv(dev)->base) {
+ ret = -ENOMEM;
+ goto free;
+ }
+
+ ec->irqaddr = priv(dev)->base + data->base_offset;
+ ec->irqmask = 0xf0;
+
+ priv(dev)->seeq = priv(dev)->base + data->base_offset;
+ dev->irq = ec->irq;
+
+ ether3_addr(dev->dev_addr, ec);
+
+ init_timer(&priv(dev)->timer);
+
+ /* Reset card...
+ */
+ ether3_outb(0x80, REG_CONFIG2 + 4);
+ bus_type = BUS_UNKNOWN;
+ udelay(4);
+
+ /* Test using Receive Pointer (16-bit register) to find out
+ * how the ether3 is connected to the bus...
+ */
+ if (ether3_probe_bus_8(dev, 0x100) &&
+ ether3_probe_bus_8(dev, 0x201))
+ bus_type = BUS_8;
+
+ if (bus_type == BUS_UNKNOWN &&
+ ether3_probe_bus_16(dev, 0x101) &&
+ ether3_probe_bus_16(dev, 0x201))
+ bus_type = BUS_16;
+
+ switch (bus_type) {
+ case BUS_UNKNOWN:
+ printk(KERN_ERR "%s: unable to identify bus width\n", dev->name);
+ ret = -ENODEV;
+ goto free;
+
+ case BUS_8:
+ printk(KERN_ERR "%s: %s found, but is an unsupported "
+ "8-bit card\n", dev->name, data->name);
+ ret = -ENODEV;
+ goto free;
+
+ default:
+ break;
+ }
+
+ if (ether3_init_2(dev)) {
+ ret = -ENODEV;
+ goto free;
+ }
+
+ dev->open = ether3_open;
+ dev->stop = ether3_close;
+ dev->hard_start_xmit = ether3_sendpacket;
+ dev->get_stats = ether3_getstats;
+ dev->set_multicast_list = ether3_setmulticastlist;
+ dev->tx_timeout = ether3_timeout;
+ dev->watchdog_timeo = 5 * HZ / 100;
+
+ ret = register_netdev(dev);
+ if (ret)
+ goto free;
+
+ printk("%s: %s in slot %d, ", dev->name, data->name, ec->slot_no);
+ for (i = 0; i < 6; i++)
+ printk("%2.2x%c", dev->dev_addr[i], i == 5 ? '\n' : ':');
+
+ ecard_set_drvdata(ec, dev);
+ return 0;
+
+ free:
+ if (priv(dev)->base)
+ iounmap(priv(dev)->base);
+ free_netdev(dev);
+ release:
+ ecard_release_resources(ec);
+ out:
+ return ret;
+}
+
+static void __devexit ether3_remove(struct expansion_card *ec)
+{
+ struct net_device *dev = ecard_get_drvdata(ec);
+
+ ecard_set_drvdata(ec, NULL);
+
+ unregister_netdev(dev);
+ iounmap(priv(dev)->base);
+ free_netdev(dev);
+ ecard_release_resources(ec);
+}
+
+static struct ether3_data ether3 = {
+ .name = "ether3",
+ .base_offset = 0,
+};
+
+static struct ether3_data etherb = {
+ .name = "etherb",
+ .base_offset = 0x800,
+};
+
+static const struct ecard_id ether3_ids[] = {
+ { MANU_ANT2, PROD_ANT_ETHER3, &ether3 },
+ { MANU_ANT, PROD_ANT_ETHER3, &ether3 },
+ { MANU_ANT, PROD_ANT_ETHERB, &etherb },
+ { 0xffff, 0xffff }
+};
+
+static struct ecard_driver ether3_driver = {
+ .probe = ether3_probe,
+ .remove = __devexit_p(ether3_remove),
+ .id_table = ether3_ids,
+ .drv = {
+ .name = "ether3",
+ },
+};
+
+static int __init ether3_init(void)
+{
+ return ecard_register_driver(&ether3_driver);
+}
+
+static void __exit ether3_exit(void)
+{
+ ecard_remove_driver(&ether3_driver);
+}
+
+module_init(ether3_init);
+module_exit(ether3_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/arm/ether3.h b/drivers/net/arm/ether3.h
new file mode 100644
index 000000000000..1921a3a07da7
--- /dev/null
+++ b/drivers/net/arm/ether3.h
@@ -0,0 +1,177 @@
+/*
+ * linux/drivers/acorn/net/ether3.h
+ *
+ * Copyright (C) 1995-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * network driver for Acorn/ANT Ether3 cards
+ */
+
+#ifndef _LINUX_ether3_H
+#define _LINUX_ether3_H
+
+/* use 0 for production, 1 for verification, >2 for debug. debug flags: */
+#define DEBUG_TX 2
+#define DEBUG_RX 4
+#define DEBUG_INT 8
+#define DEBUG_IC 16
+#ifndef NET_DEBUG
+#define NET_DEBUG 0
+#endif
+
+#define priv(dev) ((struct dev_priv *)netdev_priv(dev))
+
+/* Command register definitions & bits */
+#define REG_COMMAND (priv(dev)->seeq + 0x0000)
+#define CMD_ENINTDMA 0x0001
+#define CMD_ENINTRX 0x0002
+#define CMD_ENINTTX 0x0004
+#define CMD_ENINTBUFWIN 0x0008
+#define CMD_ACKINTDMA 0x0010
+#define CMD_ACKINTRX 0x0020
+#define CMD_ACKINTTX 0x0040
+#define CMD_ACKINTBUFWIN 0x0080
+#define CMD_DMAON 0x0100
+#define CMD_RXON 0x0200
+#define CMD_TXON 0x0400
+#define CMD_DMAOFF 0x0800
+#define CMD_RXOFF 0x1000
+#define CMD_TXOFF 0x2000
+#define CMD_FIFOREAD 0x4000
+#define CMD_FIFOWRITE 0x8000
+
+/* status register */
+#define REG_STATUS (priv(dev)->seeq + 0x0000)
+#define STAT_ENINTSTAT 0x0001
+#define STAT_ENINTRX 0x0002
+#define STAT_ENINTTX 0x0004
+#define STAT_ENINTBUFWIN 0x0008
+#define STAT_INTDMA 0x0010
+#define STAT_INTRX 0x0020
+#define STAT_INTTX 0x0040
+#define STAT_INTBUFWIN 0x0080
+#define STAT_DMAON 0x0100
+#define STAT_RXON 0x0200
+#define STAT_TXON 0x0400
+#define STAT_FIFOFULL 0x2000
+#define STAT_FIFOEMPTY 0x4000
+#define STAT_FIFODIR 0x8000
+
+/* configuration register 1 */
+#define REG_CONFIG1 (priv(dev)->seeq + 0x0040)
+#define CFG1_BUFSELSTAT0 0x0000
+#define CFG1_BUFSELSTAT1 0x0001
+#define CFG1_BUFSELSTAT2 0x0002
+#define CFG1_BUFSELSTAT3 0x0003
+#define CFG1_BUFSELSTAT4 0x0004
+#define CFG1_BUFSELSTAT5 0x0005
+#define CFG1_ADDRPROM 0x0006
+#define CFG1_TRANSEND 0x0007
+#define CFG1_LOCBUFMEM 0x0008
+#define CFG1_INTVECTOR 0x0009
+#define CFG1_RECVSPECONLY 0x0000
+#define CFG1_RECVSPECBROAD 0x4000
+#define CFG1_RECVSPECBRMULTI 0x8000
+#define CFG1_RECVPROMISC 0xC000
+
+/* The following aren't in 8004 */
+#define CFG1_DMABURSTCONT 0x0000
+#define CFG1_DMABURST800NS 0x0010
+#define CFG1_DMABURST1600NS 0x0020
+#define CFG1_DMABURST3200NS 0x0030
+#define CFG1_DMABURST1 0x0000
+#define CFG1_DMABURST4 0x0040
+#define CFG1_DMABURST8 0x0080
+#define CFG1_DMABURST16 0x00C0
+#define CFG1_RECVCOMPSTAT0 0x0100
+#define CFG1_RECVCOMPSTAT1 0x0200
+#define CFG1_RECVCOMPSTAT2 0x0400
+#define CFG1_RECVCOMPSTAT3 0x0800
+#define CFG1_RECVCOMPSTAT4 0x1000
+#define CFG1_RECVCOMPSTAT5 0x2000
+
+/* configuration register 2 */
+#define REG_CONFIG2 (priv(dev)->seeq + 0x0080)
+#define CFG2_BYTESWAP 0x0001
+#define CFG2_ERRENCRC 0x0008
+#define CFG2_ERRENDRIBBLE 0x0010
+#define CFG2_ERRSHORTFRAME 0x0020
+#define CFG2_SLOTSELECT 0x0040
+#define CFG2_PREAMSELECT 0x0080
+#define CFG2_ADDRLENGTH 0x0100
+#define CFG2_RECVCRC 0x0200
+#define CFG2_XMITNOCRC 0x0400
+#define CFG2_LOOPBACK 0x0800
+#define CFG2_CTRLO 0x1000
+#define CFG2_RESET 0x8000
+
+#define REG_RECVEND (priv(dev)->seeq + 0x00c0)
+
+#define REG_BUFWIN (priv(dev)->seeq + 0x0100)
+
+#define REG_RECVPTR (priv(dev)->seeq + 0x0140)
+
+#define REG_TRANSMITPTR (priv(dev)->seeq + 0x0180)
+
+#define REG_DMAADDR (priv(dev)->seeq + 0x01c0)
+
+/*
+ * Cards transmit/receive headers
+ */
+#define TX_NEXT (0xffff)
+#define TXHDR_ENBABBLEINT (1 << 16)
+#define TXHDR_ENCOLLISIONINT (1 << 17)
+#define TXHDR_EN16COLLISION (1 << 18)
+#define TXHDR_ENSUCCESS (1 << 19)
+#define TXHDR_DATAFOLLOWS (1 << 21)
+#define TXHDR_CHAINCONTINUE (1 << 22)
+#define TXHDR_TRANSMIT (1 << 23)
+#define TXSTAT_BABBLED (1 << 24)
+#define TXSTAT_COLLISION (1 << 25)
+#define TXSTAT_16COLLISIONS (1 << 26)
+#define TXSTAT_DONE (1 << 31)
+
+#define RX_NEXT (0xffff)
+#define RXHDR_CHAINCONTINUE (1 << 6)
+#define RXHDR_RECEIVE (1 << 7)
+#define RXSTAT_OVERSIZE (1 << 8)
+#define RXSTAT_CRCERROR (1 << 9)
+#define RXSTAT_DRIBBLEERROR (1 << 10)
+#define RXSTAT_SHORTPACKET (1 << 11)
+#define RXSTAT_DONE (1 << 15)
+
+
+#define TX_START 0x0000
+#define TX_END 0x6000
+#define RX_START 0x6000
+#define RX_LEN 0xA000
+#define RX_END 0x10000
+/* must be a power of 2 and greater than MAX_TX_BUFFERED */
+#define MAX_TXED 16
+#define MAX_TX_BUFFERED 10
+
+struct dev_priv {
+ void __iomem *base;
+ void __iomem *seeq;
+ struct {
+ unsigned int command;
+ unsigned int config1;
+ unsigned int config2;
+ } regs;
+ unsigned char tx_head; /* buffer nr to insert next packet */
+ unsigned char tx_tail; /* buffer nr of transmitting packet */
+ unsigned int rx_head; /* address to fetch next packet from */
+ struct net_device_stats stats;
+ struct timer_list timer;
+ int broken; /* 0 = ok, 1 = something went wrong */
+};
+
+struct ether3_data {
+ const char name[8];
+ unsigned long base_offset;
+};
+
+#endif
diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c
new file mode 100644
index 000000000000..942a2819576c
--- /dev/null
+++ b/drivers/net/arm/etherh.c
@@ -0,0 +1,862 @@
+/*
+ * linux/drivers/acorn/net/etherh.c
+ *
+ * Copyright (C) 2000-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * NS8390 I-cubed EtherH and ANT EtherM specific driver
+ * Thanks to I-Cubed for information on their cards.
+ * EtherM conversion (C) 1999 Chris Kemp and Tim Watterton
+ * EtherM integration (C) 2000 Aleph One Ltd (Tak-Shing Chan)
+ * EtherM integration re-engineered by Russell King.
+ *
+ * Changelog:
+ * 08-12-1996 RMK 1.00 Created
+ * RMK 1.03 Added support for EtherLan500 cards
+ * 23-11-1997 RMK 1.04 Added media autodetection
+ * 16-04-1998 RMK 1.05 Improved media autodetection
+ * 10-02-2000 RMK 1.06 Updated for 2.3.43
+ * 13-05-2000 RMK 1.07 Updated for 2.3.99-pre8
+ * 12-10-1999 CK/TEW EtherM driver first release
+ * 21-12-2000 TTC EtherH/EtherM integration
+ * 25-12-2000 RMK 1.08 Clean integration of EtherM into this driver.
+ * 03-01-2002 RMK 1.09 Always enable IRQs if we're in the nic slot.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+
+#include <asm/system.h>
+#include <asm/ecard.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include "../8390.h"
+
+#define NET_DEBUG 0
+#define DEBUG_INIT 2
+
+#define DRV_NAME "etherh"
+#define DRV_VERSION "1.11"
+
+static unsigned int net_debug = NET_DEBUG;
+
+struct etherh_priv {
+ void __iomem *ioc_fast;
+ void __iomem *memc;
+ void __iomem *dma_base;
+ unsigned int id;
+ void __iomem *ctrl_port;
+ unsigned char ctrl;
+ u32 supported;
+};
+
+struct etherh_data {
+ unsigned long ns8390_offset;
+ unsigned long dataport_offset;
+ unsigned long ctrlport_offset;
+ int ctrl_ioc;
+ const char name[16];
+ u32 supported;
+ unsigned char tx_start_page;
+ unsigned char stop_page;
+};
+
+MODULE_AUTHOR("Russell King");
+MODULE_DESCRIPTION("EtherH/EtherM driver");
+MODULE_LICENSE("GPL");
+
+static char version[] __initdata =
+ "EtherH/EtherM Driver (c) 2002-2004 Russell King " DRV_VERSION "\n";
+
+#define ETHERH500_DATAPORT 0x800 /* MEMC */
+#define ETHERH500_NS8390 0x000 /* MEMC */
+#define ETHERH500_CTRLPORT 0x800 /* IOC */
+
+#define ETHERH600_DATAPORT 0x040 /* MEMC */
+#define ETHERH600_NS8390 0x800 /* MEMC */
+#define ETHERH600_CTRLPORT 0x200 /* MEMC */
+
+#define ETHERH_CP_IE 1
+#define ETHERH_CP_IF 2
+#define ETHERH_CP_HEARTBEAT 2
+
+#define ETHERH_TX_START_PAGE 1
+#define ETHERH_STOP_PAGE 127
+
+/*
+ * These came from CK/TEW
+ */
+#define ETHERM_DATAPORT 0x200 /* MEMC */
+#define ETHERM_NS8390 0x800 /* MEMC */
+#define ETHERM_CTRLPORT 0x23c /* MEMC */
+
+#define ETHERM_TX_START_PAGE 64
+#define ETHERM_STOP_PAGE 127
+
+/* ------------------------------------------------------------------------ */
+
+#define etherh_priv(dev) \
+ ((struct etherh_priv *)(((char *)netdev_priv(dev)) + sizeof(struct ei_device)))
+
+static inline void etherh_set_ctrl(struct etherh_priv *eh, unsigned char mask)
+{
+ unsigned char ctrl = eh->ctrl | mask;
+ eh->ctrl = ctrl;
+ writeb(ctrl, eh->ctrl_port);
+}
+
+static inline void etherh_clr_ctrl(struct etherh_priv *eh, unsigned char mask)
+{
+ unsigned char ctrl = eh->ctrl & ~mask;
+ eh->ctrl = ctrl;
+ writeb(ctrl, eh->ctrl_port);
+}
+
+static inline unsigned int etherh_get_stat(struct etherh_priv *eh)
+{
+ return readb(eh->ctrl_port);
+}
+
+
+
+
+static void etherh_irq_enable(ecard_t *ec, int irqnr)
+{
+ struct etherh_priv *eh = ec->irq_data;
+
+ etherh_set_ctrl(eh, ETHERH_CP_IE);
+}
+
+static void etherh_irq_disable(ecard_t *ec, int irqnr)
+{
+ struct etherh_priv *eh = ec->irq_data;
+
+ etherh_clr_ctrl(eh, ETHERH_CP_IE);
+}
+
+static expansioncard_ops_t etherh_ops = {
+ .irqenable = etherh_irq_enable,
+ .irqdisable = etherh_irq_disable,
+};
+
+
+
+
+static void
+etherh_setif(struct net_device *dev)
+{
+ struct ei_device *ei_local = netdev_priv(dev);
+ unsigned long flags;
+ void __iomem *addr;
+
+ local_irq_save(flags);
+
+ /* set the interface type */
+ switch (etherh_priv(dev)->id) {
+ case PROD_I3_ETHERLAN600:
+ case PROD_I3_ETHERLAN600A:
+ addr = (void *)dev->base_addr + EN0_RCNTHI;
+
+ switch (dev->if_port) {
+ case IF_PORT_10BASE2:
+ writeb((readb(addr) & 0xf8) | 1, addr);
+ break;
+ case IF_PORT_10BASET:
+ writeb((readb(addr) & 0xf8), addr);
+ break;
+ }
+ break;
+
+ case PROD_I3_ETHERLAN500:
+ switch (dev->if_port) {
+ case IF_PORT_10BASE2:
+ etherh_clr_ctrl(etherh_priv(dev), ETHERH_CP_IF);
+ break;
+
+ case IF_PORT_10BASET:
+ etherh_set_ctrl(etherh_priv(dev), ETHERH_CP_IF);
+ break;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ local_irq_restore(flags);
+}
+
+static int
+etherh_getifstat(struct net_device *dev)
+{
+ struct ei_device *ei_local = netdev_priv(dev);
+ void __iomem *addr;
+ int stat = 0;
+
+ switch (etherh_priv(dev)->id) {
+ case PROD_I3_ETHERLAN600:
+ case PROD_I3_ETHERLAN600A:
+ addr = (void *)dev->base_addr + EN0_RCNTHI;
+ switch (dev->if_port) {
+ case IF_PORT_10BASE2:
+ stat = 1;
+ break;
+ case IF_PORT_10BASET:
+ stat = readb(addr) & 4;
+ break;
+ }
+ break;
+
+ case PROD_I3_ETHERLAN500:
+ switch (dev->if_port) {
+ case IF_PORT_10BASE2:
+ stat = 1;
+ break;
+ case IF_PORT_10BASET:
+ stat = etherh_get_stat(etherh_priv(dev)) & ETHERH_CP_HEARTBEAT;
+ break;
+ }
+ break;
+
+ default:
+ stat = 0;
+ break;
+ }
+
+ return stat != 0;
+}
+
+/*
+ * Configure the interface. Note that we ignore the other
+ * parts of ifmap, since its mostly meaningless for this driver.
+ */
+static int etherh_set_config(struct net_device *dev, struct ifmap *map)
+{
+ switch (map->port) {
+ case IF_PORT_10BASE2:
+ case IF_PORT_10BASET:
+ /*
+ * If the user explicitly sets the interface
+ * media type, turn off automedia detection.
+ */
+ dev->flags &= ~IFF_AUTOMEDIA;
+ dev->if_port = map->port;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ etherh_setif(dev);
+
+ return 0;
+}
+
+/*
+ * Reset the 8390 (hard reset). Note that we can't actually do this.
+ */
+static void
+etherh_reset(struct net_device *dev)
+{
+ struct ei_device *ei_local = netdev_priv(dev);
+ void __iomem *addr = (void *)dev->base_addr;
+
+ writeb(E8390_NODMA+E8390_PAGE0+E8390_STOP, addr);
+
+ /*
+ * See if we need to change the interface type.
+ * Note that we use 'interface_num' as a flag
+ * to indicate that we need to change the media.
+ */
+ if (dev->flags & IFF_AUTOMEDIA && ei_local->interface_num) {
+ ei_local->interface_num = 0;
+
+ if (dev->if_port == IF_PORT_10BASET)
+ dev->if_port = IF_PORT_10BASE2;
+ else
+ dev->if_port = IF_PORT_10BASET;
+
+ etherh_setif(dev);
+ }
+}
+
+/*
+ * Write a block of data out to the 8390
+ */
+static void
+etherh_block_output (struct net_device *dev, int count, const unsigned char *buf, int start_page)
+{
+ struct ei_device *ei_local = netdev_priv(dev);
+ unsigned long dma_start;
+ void __iomem *dma_base, *addr;
+
+ if (ei_local->dmaing) {
+ printk(KERN_ERR "%s: DMAing conflict in etherh_block_input: "
+ " DMAstat %d irqlock %d\n", dev->name,
+ ei_local->dmaing, ei_local->irqlock);
+ return;
+ }
+
+ /*
+ * Make sure we have a round number of bytes if we're in word mode.
+ */
+ if (count & 1 && ei_local->word16)
+ count++;
+
+ ei_local->dmaing = 1;
+
+ addr = (void *)dev->base_addr;
+ dma_base = etherh_priv(dev)->dma_base;
+
+ count = (count + 1) & ~1;
+ writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD);
+
+ writeb (0x42, addr + EN0_RCNTLO);
+ writeb (0x00, addr + EN0_RCNTHI);
+ writeb (0x42, addr + EN0_RSARLO);
+ writeb (0x00, addr + EN0_RSARHI);
+ writeb (E8390_RREAD | E8390_START, addr + E8390_CMD);
+
+ udelay (1);
+
+ writeb (ENISR_RDC, addr + EN0_ISR);
+ writeb (count, addr + EN0_RCNTLO);
+ writeb (count >> 8, addr + EN0_RCNTHI);
+ writeb (0, addr + EN0_RSARLO);
+ writeb (start_page, addr + EN0_RSARHI);
+ writeb (E8390_RWRITE | E8390_START, addr + E8390_CMD);
+
+ if (ei_local->word16)
+ writesw (dma_base, buf, count >> 1);
+ else
+ writesb (dma_base, buf, count);
+
+ dma_start = jiffies;
+
+ while ((readb (addr + EN0_ISR) & ENISR_RDC) == 0)
+ if (jiffies - dma_start > 2*HZ/100) { /* 20ms */
+ printk(KERN_ERR "%s: timeout waiting for TX RDC\n",
+ dev->name);
+ etherh_reset (dev);
+ NS8390_init (dev, 1);
+ break;
+ }
+
+ writeb (ENISR_RDC, addr + EN0_ISR);
+ ei_local->dmaing = 0;
+}
+
+/*
+ * Read a block of data from the 8390
+ */
+static void
+etherh_block_input (struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
+{
+ struct ei_device *ei_local = netdev_priv(dev);
+ unsigned char *buf;
+ void __iomem *dma_base, *addr;
+
+ if (ei_local->dmaing) {
+ printk(KERN_ERR "%s: DMAing conflict in etherh_block_input: "
+ " DMAstat %d irqlock %d\n", dev->name,
+ ei_local->dmaing, ei_local->irqlock);
+ return;
+ }
+
+ ei_local->dmaing = 1;
+
+ addr = (void *)dev->base_addr;
+ dma_base = etherh_priv(dev)->dma_base;
+
+ buf = skb->data;
+ writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD);
+ writeb (count, addr + EN0_RCNTLO);
+ writeb (count >> 8, addr + EN0_RCNTHI);
+ writeb (ring_offset, addr + EN0_RSARLO);
+ writeb (ring_offset >> 8, addr + EN0_RSARHI);
+ writeb (E8390_RREAD | E8390_START, addr + E8390_CMD);
+
+ if (ei_local->word16) {
+ readsw (dma_base, buf, count >> 1);
+ if (count & 1)
+ buf[count - 1] = readb (dma_base);
+ } else
+ readsb (dma_base, buf, count);
+
+ writeb (ENISR_RDC, addr + EN0_ISR);
+ ei_local->dmaing = 0;
+}
+
+/*
+ * Read a header from the 8390
+ */
+static void
+etherh_get_header (struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
+{
+ struct ei_device *ei_local = netdev_priv(dev);
+ void __iomem *dma_base, *addr;
+
+ if (ei_local->dmaing) {
+ printk(KERN_ERR "%s: DMAing conflict in etherh_get_header: "
+ " DMAstat %d irqlock %d\n", dev->name,
+ ei_local->dmaing, ei_local->irqlock);
+ return;
+ }
+
+ ei_local->dmaing = 1;
+
+ addr = (void *)dev->base_addr;
+ dma_base = etherh_priv(dev)->dma_base;
+
+ writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD);
+ writeb (sizeof (*hdr), addr + EN0_RCNTLO);
+ writeb (0, addr + EN0_RCNTHI);
+ writeb (0, addr + EN0_RSARLO);
+ writeb (ring_page, addr + EN0_RSARHI);
+ writeb (E8390_RREAD | E8390_START, addr + E8390_CMD);
+
+ if (ei_local->word16)
+ readsw (dma_base, hdr, sizeof (*hdr) >> 1);
+ else
+ readsb (dma_base, hdr, sizeof (*hdr));
+
+ writeb (ENISR_RDC, addr + EN0_ISR);
+ ei_local->dmaing = 0;
+}
+
+/*
+ * Open/initialize the board. This is called (in the current kernel)
+ * sometime after booting when the 'ifconfig' program is run.
+ *
+ * This routine should set everything up anew at each open, even
+ * registers that "should" only need to be set once at boot, so that
+ * there is non-reboot way to recover if something goes wrong.
+ */
+static int
+etherh_open(struct net_device *dev)
+{
+ struct ei_device *ei_local = netdev_priv(dev);
+
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+ printk(KERN_WARNING "%s: invalid ethernet MAC address\n",
+ dev->name);
+ return -EINVAL;
+ }
+
+ if (request_irq(dev->irq, ei_interrupt, 0, dev->name, dev))
+ return -EAGAIN;
+
+ /*
+ * Make sure that we aren't going to change the
+ * media type on the next reset - we are about to
+ * do automedia manually now.
+ */
+ ei_local->interface_num = 0;
+
+ /*
+ * If we are doing automedia detection, do it now.
+ * This is more reliable than the 8390's detection.
+ */
+ if (dev->flags & IFF_AUTOMEDIA) {
+ dev->if_port = IF_PORT_10BASET;
+ etherh_setif(dev);
+ mdelay(1);
+ if (!etherh_getifstat(dev)) {
+ dev->if_port = IF_PORT_10BASE2;
+ etherh_setif(dev);
+ }
+ } else
+ etherh_setif(dev);
+
+ etherh_reset(dev);
+ ei_open(dev);
+
+ return 0;
+}
+
+/*
+ * The inverse routine to etherh_open().
+ */
+static int
+etherh_close(struct net_device *dev)
+{
+ ei_close (dev);
+ free_irq (dev->irq, dev);
+ return 0;
+}
+
+/*
+ * Initialisation
+ */
+
+static void __init etherh_banner(void)
+{
+ static int version_printed;
+
+ if (net_debug && version_printed++ == 0)
+ printk(KERN_INFO "%s", version);
+}
+
+/*
+ * Read the ethernet address string from the on board rom.
+ * This is an ascii string...
+ */
+static int __init etherh_addr(char *addr, struct expansion_card *ec)
+{
+ struct in_chunk_dir cd;
+ char *s;
+
+ if (!ecard_readchunk(&cd, ec, 0xf5, 0)) {
+ printk(KERN_ERR "%s: unable to read podule description string\n",
+ ec->dev.bus_id);
+ goto no_addr;
+ }
+
+ s = strchr(cd.d.string, '(');
+ if (s) {
+ int i;
+
+ for (i = 0; i < 6; i++) {
+ addr[i] = simple_strtoul(s + 1, &s, 0x10);
+ if (*s != (i == 5? ')' : ':'))
+ break;
+ }
+
+ if (i == 6)
+ return 0;
+ }
+
+ printk(KERN_ERR "%s: unable to parse MAC address: %s\n",
+ ec->dev.bus_id, cd.d.string);
+
+ no_addr:
+ return -ENODEV;
+}
+
+/*
+ * Create an ethernet address from the system serial number.
+ */
+static int __init etherm_addr(char *addr)
+{
+ unsigned int serial;
+
+ if (system_serial_low == 0 && system_serial_high == 0)
+ return -ENODEV;
+
+ serial = system_serial_low | system_serial_high;
+
+ addr[0] = 0;
+ addr[1] = 0;
+ addr[2] = 0xa4;
+ addr[3] = 0x10 + (serial >> 24);
+ addr[4] = serial >> 16;
+ addr[5] = serial >> 8;
+ return 0;
+}
+
+static void etherh_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
+ strlcpy(info->version, DRV_VERSION, sizeof(info->version));
+ strlcpy(info->bus_info, dev->class_dev.dev->bus_id,
+ sizeof(info->bus_info));
+}
+
+static int etherh_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ cmd->supported = etherh_priv(dev)->supported;
+ cmd->speed = SPEED_10;
+ cmd->duplex = DUPLEX_HALF;
+ cmd->port = dev->if_port == IF_PORT_10BASET ? PORT_TP : PORT_BNC;
+ cmd->autoneg = dev->flags & IFF_AUTOMEDIA ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+ return 0;
+}
+
+static int etherh_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ switch (cmd->autoneg) {
+ case AUTONEG_ENABLE:
+ dev->flags |= IFF_AUTOMEDIA;
+ break;
+
+ case AUTONEG_DISABLE:
+ switch (cmd->port) {
+ case PORT_TP:
+ dev->if_port = IF_PORT_10BASET;
+ break;
+
+ case PORT_BNC:
+ dev->if_port = IF_PORT_10BASE2;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ dev->flags &= ~IFF_AUTOMEDIA;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ etherh_setif(dev);
+
+ return 0;
+}
+
+static struct ethtool_ops etherh_ethtool_ops = {
+ .get_settings = etherh_get_settings,
+ .set_settings = etherh_set_settings,
+ .get_drvinfo = etherh_get_drvinfo,
+};
+
+static u32 etherh_regoffsets[16];
+static u32 etherm_regoffsets[16];
+
+static int __init
+etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
+{
+ const struct etherh_data *data = id->data;
+ struct ei_device *ei_local;
+ struct net_device *dev;
+ struct etherh_priv *eh;
+ int i, ret;
+
+ etherh_banner();
+
+ ret = ecard_request_resources(ec);
+ if (ret)
+ goto out;
+
+ dev = __alloc_ei_netdev(sizeof(struct etherh_priv));
+ if (!dev) {
+ ret = -ENOMEM;
+ goto release;
+ }
+
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &ec->dev);
+
+ dev->open = etherh_open;
+ dev->stop = etherh_close;
+ dev->set_config = etherh_set_config;
+ dev->irq = ec->irq;
+ dev->ethtool_ops = &etherh_ethtool_ops;
+
+ if (data->supported & SUPPORTED_Autoneg)
+ dev->flags |= IFF_AUTOMEDIA;
+ if (data->supported & SUPPORTED_TP) {
+ dev->flags |= IFF_PORTSEL;
+ dev->if_port = IF_PORT_10BASET;
+ } else if (data->supported & SUPPORTED_BNC) {
+ dev->flags |= IFF_PORTSEL;
+ dev->if_port = IF_PORT_10BASE2;
+ } else
+ dev->if_port = IF_PORT_UNKNOWN;
+
+ eh = etherh_priv(dev);
+ eh->supported = data->supported;
+ eh->ctrl = 0;
+ eh->id = ec->cid.product;
+ eh->memc = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC), PAGE_SIZE);
+ if (!eh->memc) {
+ ret = -ENOMEM;
+ goto free;
+ }
+
+ eh->ctrl_port = eh->memc;
+ if (data->ctrl_ioc) {
+ eh->ioc_fast = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST), PAGE_SIZE);
+ if (!eh->ioc_fast) {
+ ret = -ENOMEM;
+ goto free;
+ }
+ eh->ctrl_port = eh->ioc_fast;
+ }
+
+ dev->base_addr = (unsigned long)eh->memc + data->ns8390_offset;
+ eh->dma_base = eh->memc + data->dataport_offset;
+ eh->ctrl_port += data->ctrlport_offset;
+
+ /*
+ * IRQ and control port handling - only for non-NIC slot cards.
+ */
+ if (ec->slot_no != 8) {
+ ec->ops = &etherh_ops;
+ ec->irq_data = eh;
+ } else {
+ /*
+ * If we're in the NIC slot, make sure the IRQ is enabled
+ */
+ etherh_set_ctrl(eh, ETHERH_CP_IE);
+ }
+
+ ei_local = netdev_priv(dev);
+ spin_lock_init(&ei_local->page_lock);
+
+ if (ec->cid.product == PROD_ANT_ETHERM) {
+ etherm_addr(dev->dev_addr);
+ ei_local->reg_offset = etherm_regoffsets;
+ } else {
+ etherh_addr(dev->dev_addr, ec);
+ ei_local->reg_offset = etherh_regoffsets;
+ }
+
+ ei_local->name = dev->name;
+ ei_local->word16 = 1;
+ ei_local->tx_start_page = data->tx_start_page;
+ ei_local->rx_start_page = ei_local->tx_start_page + TX_PAGES;
+ ei_local->stop_page = data->stop_page;
+ ei_local->reset_8390 = etherh_reset;
+ ei_local->block_input = etherh_block_input;
+ ei_local->block_output = etherh_block_output;
+ ei_local->get_8390_hdr = etherh_get_header;
+ ei_local->interface_num = 0;
+
+ etherh_reset(dev);
+ NS8390_init(dev, 0);
+
+ ret = register_netdev(dev);
+ if (ret)
+ goto free;
+
+ printk(KERN_INFO "%s: %s in slot %d, ",
+ dev->name, data->name, ec->slot_no);
+
+ for (i = 0; i < 6; i++)
+ printk("%2.2x%c", dev->dev_addr[i], i == 5 ? '\n' : ':');
+
+ ecard_set_drvdata(ec, dev);
+
+ return 0;
+
+ free:
+ if (eh->ioc_fast)
+ iounmap(eh->ioc_fast);
+ if (eh->memc)
+ iounmap(eh->memc);
+ free_netdev(dev);
+ release:
+ ecard_release_resources(ec);
+ out:
+ return ret;
+}
+
+static void __devexit etherh_remove(struct expansion_card *ec)
+{
+ struct net_device *dev = ecard_get_drvdata(ec);
+ struct etherh_priv *eh = etherh_priv(dev);
+
+ ecard_set_drvdata(ec, NULL);
+
+ unregister_netdev(dev);
+ ec->ops = NULL;
+
+ if (eh->ioc_fast)
+ iounmap(eh->ioc_fast);
+ iounmap(eh->memc);
+
+ free_netdev(dev);
+
+ ecard_release_resources(ec);
+}
+
+static struct etherh_data etherm_data = {
+ .ns8390_offset = ETHERM_NS8390,
+ .dataport_offset = ETHERM_NS8390 + ETHERM_DATAPORT,
+ .ctrlport_offset = ETHERM_NS8390 + ETHERM_CTRLPORT,
+ .name = "ANT EtherM",
+ .supported = SUPPORTED_10baseT_Half,
+ .tx_start_page = ETHERM_TX_START_PAGE,
+ .stop_page = ETHERM_STOP_PAGE,
+};
+
+static struct etherh_data etherlan500_data = {
+ .ns8390_offset = ETHERH500_NS8390,
+ .dataport_offset = ETHERH500_NS8390 + ETHERH500_DATAPORT,
+ .ctrlport_offset = ETHERH500_CTRLPORT,
+ .ctrl_ioc = 1,
+ .name = "i3 EtherH 500",
+ .supported = SUPPORTED_10baseT_Half,
+ .tx_start_page = ETHERH_TX_START_PAGE,
+ .stop_page = ETHERH_STOP_PAGE,
+};
+
+static struct etherh_data etherlan600_data = {
+ .ns8390_offset = ETHERH600_NS8390,
+ .dataport_offset = ETHERH600_NS8390 + ETHERH600_DATAPORT,
+ .ctrlport_offset = ETHERH600_NS8390 + ETHERH600_CTRLPORT,
+ .name = "i3 EtherH 600",
+ .supported = SUPPORTED_10baseT_Half | SUPPORTED_TP | SUPPORTED_BNC | SUPPORTED_Autoneg,
+ .tx_start_page = ETHERH_TX_START_PAGE,
+ .stop_page = ETHERH_STOP_PAGE,
+};
+
+static struct etherh_data etherlan600a_data = {
+ .ns8390_offset = ETHERH600_NS8390,
+ .dataport_offset = ETHERH600_NS8390 + ETHERH600_DATAPORT,
+ .ctrlport_offset = ETHERH600_NS8390 + ETHERH600_CTRLPORT,
+ .name = "i3 EtherH 600A",
+ .supported = SUPPORTED_10baseT_Half | SUPPORTED_TP | SUPPORTED_BNC | SUPPORTED_Autoneg,
+ .tx_start_page = ETHERH_TX_START_PAGE,
+ .stop_page = ETHERH_STOP_PAGE,
+};
+
+static const struct ecard_id etherh_ids[] = {
+ { MANU_ANT, PROD_ANT_ETHERM, &etherm_data },
+ { MANU_I3, PROD_I3_ETHERLAN500, &etherlan500_data },
+ { MANU_I3, PROD_I3_ETHERLAN600, &etherlan600_data },
+ { MANU_I3, PROD_I3_ETHERLAN600A, &etherlan600a_data },
+ { 0xffff, 0xffff }
+};
+
+static struct ecard_driver etherh_driver = {
+ .probe = etherh_probe,
+ .remove = __devexit_p(etherh_remove),
+ .id_table = etherh_ids,
+ .drv = {
+ .name = DRV_NAME,
+ },
+};
+
+static int __init etherh_init(void)
+{
+ int i;
+
+ for (i = 0; i < 16; i++) {
+ etherh_regoffsets[i] = i << 2;
+ etherm_regoffsets[i] = i << 5;
+ }
+
+ return ecard_register_driver(&etherh_driver);
+}
+
+static void __exit etherh_exit(void)
+{
+ ecard_remove_driver(&etherh_driver);
+}
+
+module_init(etherh_init);
+module_exit(etherh_exit);