diff options
| author | Michael Chan <mchan@broadcom.com> | 2007-07-07 22:48:00 -0700 |
|---|---|---|
| committer | David S. Miller <davem@sunset.davemloft.net> | 2007-07-10 22:18:30 -0700 |
| commit | deaf391b4cc9d9f8e2b2793ebd56da776b54197a (patch) | |
| tree | f834c1aae99c9d97eea7393286d91e5c3e43b13a /drivers/net/bnx2.c | |
| parent | 5faf41535214b68c989a22302c8870f8758cbb8c (diff) | |
[BNX2]: Add bnx2_set_default_link().
Put existing code to setup the default link settings in this new
function. This makes it easier to support the remote PHY feature in
the next few patches.
Also change ETHTOOL_ALL_FIBRE_SPEED to include 2500Mbps if supported.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/bnx2.c')
| -rw-r--r-- | drivers/net/bnx2.c | 43 |
1 files changed, 25 insertions, 18 deletions
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 0f4f76fda26f..56bc41ee9a47 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -1323,7 +1323,9 @@ bnx2_setup_serdes_phy(struct bnx2 *bp) } #define ETHTOOL_ALL_FIBRE_SPEED \ - (ADVERTISED_1000baseT_Full) + (bp->phy_flags & PHY_2_5G_CAPABLE_FLAG) ? \ + (ADVERTISED_2500baseX_Full | ADVERTISED_1000baseT_Full) :\ + (ADVERTISED_1000baseT_Full) #define ETHTOOL_ALL_COPPER_SPEED \ (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \ @@ -1335,6 +1337,27 @@ bnx2_setup_serdes_phy(struct bnx2 *bp) #define PHY_ALL_1000_SPEED (ADVERTISE_1000HALF | ADVERTISE_1000FULL) +static void +bnx2_set_default_link(struct bnx2 *bp) +{ + bp->autoneg = AUTONEG_SPEED | AUTONEG_FLOW_CTRL; + bp->req_line_speed = 0; + if (bp->phy_flags & PHY_SERDES_FLAG) { + u32 reg; + + bp->advertising = ETHTOOL_ALL_FIBRE_SPEED | ADVERTISED_Autoneg; + + reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_CONFIG); + reg &= BNX2_PORT_HW_CFG_CFG_DFLT_LINK_MASK; + if (reg == BNX2_PORT_HW_CFG_CFG_DFLT_LINK_1G) { + bp->autoneg = 0; + bp->req_line_speed = bp->line_speed = SPEED_1000; + bp->req_duplex = DUPLEX_FULL; + } + } else + bp->advertising = ETHTOOL_ALL_COPPER_SPEED | ADVERTISED_Autoneg; +} + static int bnx2_setup_copper_phy(struct bnx2 *bp) { @@ -6374,23 +6397,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) } } - bp->autoneg = AUTONEG_SPEED | AUTONEG_FLOW_CTRL; - bp->req_line_speed = 0; - if (bp->phy_flags & PHY_SERDES_FLAG) { - bp->advertising = ETHTOOL_ALL_FIBRE_SPEED | ADVERTISED_Autoneg; - - reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_CONFIG); - reg &= BNX2_PORT_HW_CFG_CFG_DFLT_LINK_MASK; - if (reg == BNX2_PORT_HW_CFG_CFG_DFLT_LINK_1G) { - bp->autoneg = 0; - bp->req_line_speed = bp->line_speed = SPEED_1000; - bp->req_duplex = DUPLEX_FULL; - } - } - else { - bp->advertising = ETHTOOL_ALL_COPPER_SPEED | ADVERTISED_Autoneg; - } - + bnx2_set_default_link(bp); bp->req_flow_ctrl = FLOW_CTRL_RX | FLOW_CTRL_TX; init_timer(&bp->timer); |