diff options
| author | Eliezer Tamir <eliezert@broadcom.com> | 2007-11-15 20:09:02 +0200 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2008-01-28 15:03:53 -0800 |
| commit | a2fbb9ea235467b0be6db3cec0132b6c83c0b9fb (patch) | |
| tree | f6717161d5f374e84553f579eb3102bcf9ffdc0f /drivers/net/bnx2x_reg.h | |
| parent | faa4f7969f3340606f46515560ce193d9bd74ea4 (diff) | |
add bnx2x driver for BCM57710
Signed-off-by: Eliezer Tamir <eliezert@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/bnx2x_reg.h')
| -rw-r--r-- | drivers/net/bnx2x_reg.h | 4394 |
1 files changed, 4394 insertions, 0 deletions
diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h new file mode 100644 index 000000000000..86055297ab02 --- /dev/null +++ b/drivers/net/bnx2x_reg.h @@ -0,0 +1,4394 @@ +/* bnx2x_reg.h: Broadcom Everest network driver. + * + * Copyright (c) 2007 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * The registers description starts with the regsister Access type followed + * by size in bits. For example [RW 32]. The access types are: + * R - Read only + * RC - Clear on read + * RW - Read/Write + * ST - Statistics register (clear on read) + * W - Write only + * WB - Wide bus register - the size is over 32 bits and it should be + * read/write in consecutive 32 bits accesses + * WR - Write Clear (write 1 to clear the bit) + * + */ + + +/* [R 19] Interrupt register #0 read */ +#define BRB1_REG_BRB1_INT_STS 0x6011c +/* [RW 4] Parity mask register #0 read/write */ +#define BRB1_REG_BRB1_PRTY_MASK 0x60138 +/* [RW 10] At address BRB1_IND_FREE_LIST_PRS_CRDT initialize free head. At + address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address + BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. */ +#define BRB1_REG_FREE_LIST_PRS_CRDT 0x60200 +/* [RW 23] LL RAM data. */ +#define BRB1_REG_LL_RAM 0x61000 +/* [R 24] The number of full blocks. */ +#define BRB1_REG_NUM_OF_FULL_BLOCKS 0x60090 +/* [ST 32] The number of cycles that the write_full signal towards MAC #0 + was asserted. */ +#define BRB1_REG_NUM_OF_FULL_CYCLES_0 0x600c8 +#define BRB1_REG_NUM_OF_FULL_CYCLES_1 0x600cc +#define BRB1_REG_NUM_OF_FULL_CYCLES_2 0x600d0 +#define BRB1_REG_NUM_OF_FULL_CYCLES_3 0x600d4 +#define BRB1_REG_NUM_OF_FULL_CYCLES_4 0x600d8 +/* [ST 32] The number of cycles that the pause signal towards MAC #0 was + asserted. */ +#define BRB1_REG_NUM_OF_PAUSE_CYCLES_0 0x600b8 +#define BRB1_REG_NUM_OF_PAUSE_CYCLES_1 0x600bc +#define BRB1_REG_NUM_OF_PAUSE_CYCLES_2 0x600c0 +#define BRB1_REG_NUM_OF_PAUSE_CYCLES_3 0x600c4 +/* [RW 10] Write client 0: De-assert pause threshold. */ +#define BRB1_REG_PAUSE_HIGH_THRESHOLD_0 0x60078 +#define BRB1_REG_PAUSE_HIGH_THRESHOLD_1 0x6007c +/* [RW 10] Write client 0: Assert pause threshold. */ +#define BRB1_REG_PAUSE_LOW_THRESHOLD_0 0x60068 +#define BRB1_REG_PAUSE_LOW_THRESHOLD_1 0x6006c +/* [RW 1] Reset the design by software. */ +#define BRB1_REG_SOFT_RESET 0x600dc +/* [R 5] Used to read the value of the XX protection CAM occupancy counter. */ +#define CCM_REG_CAM_OCCUP 0xd0188 +/* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define CCM_REG_CCM_CFC_IFEN 0xd003c +/* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define CCM_REG_CCM_CQM_IFEN 0xd000c +/* [RW 1] If set the Q index; received from the QM is inserted to event ID. + Otherwise 0 is inserted. */ +#define CCM_REG_CCM_CQM_USE_Q 0xd00c0 +/* [RW 11] Interrupt mask register #0 read/write */ +#define CCM_REG_CCM_INT_MASK 0xd01e4 +/* [R 11] Interrupt register #0 read */ +#define CCM_REG_CCM_INT_STS 0xd01d8 +/* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS + REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5). + Is used to determine the number of the AG context REG-pairs written back; + when the input message Reg1WbFlg isn't set. */ +#define CCM_REG_CCM_REG0_SZ 0xd00c4 +/* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define CCM_REG_CCM_STORM0_IFEN 0xd0004 +/* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define CCM_REG_CCM_STORM1_IFEN 0xd0008 +/* [RW 1] CDU AG read Interface enable. If 0 - the request input is + disregarded; valid output is deasserted; all other signals are treated as + usual; if 1 - normal activity. */ +#define CCM_REG_CDU_AG_RD_IFEN 0xd0030 +/* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input + are disregarded; all other signals are treated as usual; if 1 - normal + activity. */ +#define CCM_REG_CDU_AG_WR_IFEN 0xd002c +/* [RW 1] CDU STORM read Interface enable. If 0 - the request input is + disregarded; valid output is deasserted; all other signals are treated as + usual; if 1 - normal activity. */ +#define CCM_REG_CDU_SM_RD_IFEN 0xd0038 +/* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid + input is disregarded; all other signals are treated as usual; if 1 - + normal activity. */ +#define CCM_REG_CDU_SM_WR_IFEN 0xd0034 +/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes + the initial credit value; read returns the current value of the credit + counter. Must be initialized to 1 at start-up. */ +#define CCM_REG_CFC_INIT_CRD 0xd0204 +/* [RW 2] Auxillary counter flag Q number 1. */ +#define CCM_REG_CNT_AUX1_Q 0xd00c8 +/* [RW 2] Auxillary counter flag Q number 2. */ +#define CCM_REG_CNT_AUX2_Q 0xd00cc +/* [RW 28] The CM header value for QM request (primary). */ +#define CCM_REG_CQM_CCM_HDR_P 0xd008c +/* [RW 28] The CM header value for QM request (secondary). */ +#define CCM_REG_CQM_CCM_HDR_S 0xd0090 +/* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define CCM_REG_CQM_CCM_IFEN 0xd0014 +/* [RW 6] QM output initial credit. Max credit available - 32. Write writes + the initial credit value; read returns the current value of the credit + counter. Must be initialized to 32 at start-up. */ +#define CCM_REG_CQM_INIT_CRD 0xd020c +/* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0 + stands for weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define CCM_REG_CQM_P_WEIGHT 0xd00b8 +/* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define CCM_REG_CSDM_IFEN 0xd0018 +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the SDM interface is detected. */ +#define CCM_REG_CSDM_LENGTH_MIS 0xd0170 +/* [RW 28] The CM header for QM formatting in case of an error in the QM + inputs. */ +#define CCM_REG_ERR_CCM_HDR 0xd0094 +/* [RW 8] The Event ID in case the input message ErrorFlg is set. */ +#define CCM_REG_ERR_EVNT_ID 0xd0098 +/* [RW 8] FIC0 output initial credit. Max credit available - 255. Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 64 at start-up. */ +#define CCM_REG_FIC0_INIT_CRD 0xd0210 +/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 64 at start-up. */ +#define CCM_REG_FIC1_INIT_CRD 0xd0214 +/* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1 + - strict priority defined by ~ccm_registers_gr_ag_pr.gr_ag_pr; + ~ccm_registers_gr_ld0_pr.gr_ld0_pr and + ~ccm_registers_gr_ld1_pr.gr_ld1_pr. Groups are according to channels and + outputs to STORM: aggregation; load FIC0; load FIC1 and store. */ +#define CCM_REG_GR_ARB_TYPE 0xd015c +/* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the + highest priority is 3. It is supposed; that the Store channel priority is + the compliment to 4 of the rest priorities - Aggregation channel; Load + (FIC0) channel and Load (FIC1). */ +#define CCM_REG_GR_LD0_PR 0xd0164 +/* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the + highest priority is 3. It is supposed; that the Store channel priority is + the compliment to 4 of the rest priorities - Aggregation channel; Load + (FIC0) channel and Load (FIC1). */ +#define CCM_REG_GR_LD1_PR 0xd0168 +/* [RW 2] General flags index. */ +#define CCM_REG_INV_DONE_Q 0xd0108 +/* [RW 4] The number of double REG-pairs(128 bits); loaded from the STORM + context and sent to STORM; for a specific connection type. The double + REG-pairs are used in order to align to STORM context row size of 128 + bits. The offset of these data in the STORM context is always 0. Index + _(0..15) stands for the connection type (one of 16). */ +#define CCM_REG_N_SM_CTX_LD_0 0xd004c +#define CCM_REG_N_SM_CTX_LD_1 0xd0050 +#define CCM_REG_N_SM_CTX_LD_10 0xd0074 +#define CCM_REG_N_SM_CTX_LD_11 0xd0078 +#define CCM_REG_N_SM_CTX_LD_12 0xd007c +#define CCM_REG_N_SM_CTX_LD_13 0xd0080 +#define CCM_REG_N_SM_CTX_LD_14 0xd0084 +#define CCM_REG_N_SM_CTX_LD_15 0xd0088 +#define CCM_REG_N_SM_CTX_LD_2 0xd0054 +#define CCM_REG_N_SM_CTX_LD_3 0xd0058 +#define CCM_REG_N_SM_CTX_LD_4 0xd005c +/* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define CCM_REG_PBF_IFEN 0xd0028 +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the pbf interface is detected. */ +#define CCM_REG_PBF_LENGTH_MIS 0xd0180 +/* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define CCM_REG_PBF_WEIGHT 0xd00ac +/* [RW 6] The physical queue number of queue number 1 per port index. */ +#define CCM_REG_PHYS_QNUM1_0 0xd0134 +#define CCM_REG_PHYS_QNUM1_1 0xd0138 +/* [RW 6] The physical queue number of queue number 2 per port index. */ +#define CCM_REG_PHYS_QNUM2_0 0xd013c +#define CCM_REG_PHYS_QNUM2_1 0xd0140 +/* [RW 6] The physical queue number of queue number 3 per port index. */ +#define CCM_REG_PHYS_QNUM3_0 0xd0144 +/* [RW 6] The physical queue number of queue number 0 with QOS equal 0 port + index 0. */ +#define CCM_REG_QOS_PHYS_QNUM0_0 0xd0114 +#define CCM_REG_QOS_PHYS_QNUM0_1 0xd0118 +/* [RW 6] The physical queue number of queue number 0 with QOS equal 1 port + index 0. */ +#define CCM_REG_QOS_PHYS_QNUM1_0 0xd011c +#define CCM_REG_QOS_PHYS_QNUM1_1 0xd0120 +/* [RW 6] The physical queue number of queue number 0 with QOS equal 2 port + index 0. */ +#define CCM_REG_QOS_PHYS_QNUM2_0 0xd0124 +/* [RW 1] STORM - CM Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define CCM_REG_STORM_CCM_IFEN 0xd0010 +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the STORM interface is detected. */ +#define CCM_REG_STORM_LENGTH_MIS 0xd016c +/* [RW 1] Input tsem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define CCM_REG_TSEM_IFEN 0xd001c +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the tsem interface is detected. */ +#define CCM_REG_TSEM_LENGTH_MIS 0xd0174 +/* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define CCM_REG_TSEM_WEIGHT 0xd00a0 +/* [RW 1] Input usem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define CCM_REG_USEM_IFEN 0xd0024 +/* [RC 1] Set when message length mismatch (relative to last indication) at + the usem interface is detected. */ +#define CCM_REG_USEM_LENGTH_MIS 0xd017c +/* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define CCM_REG_USEM_WEIGHT 0xd00a8 +/* [RW 1] Input xsem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define CCM_REG_XSEM_IFEN 0xd0020 +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the xsem interface is detected. */ +#define CCM_REG_XSEM_LENGTH_MIS 0xd0178 +/* [RW 3] The weight of the input xsem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define CCM_REG_XSEM_WEIGHT 0xd00a4 +/* [RW 19] Indirect access to the descriptor table of the XX protection + mechanism. The fields are: [5:0] - message length; [12:6] - message + pointer; 18:13] - next pointer. */ +#define CCM_REG_XX_DESCR_TABLE 0xd0300 +/* [R 7] Used to read the value of XX protection Free counter. */ +#define CCM_REG_XX_FREE 0xd0184 +/* [RW 6] Initial value for the credit counter; responsible for fulfilling + of the Input Stage XX protection buffer by the XX protection pending + messages. Max credit available - 127. Write writes the initial credit + value; read returns the current value of the credit counter. Must be + initialized to maximum XX protected message size - 2 at start-up. */ +#define CCM_REG_XX_INIT_CRD 0xd0220 +/* [RW 7] The maximum number of pending messages; which may be stored in XX + protection. At read the ~ccm_registers_xx_free.xx_free counter is read. + At write comprises the start value of the ~ccm_registers_xx_free.xx_free + counter. */ +#define CCM_REG_XX_MSG_NUM 0xd0224 +/* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */ +#define CCM_REG_XX_OVFL_EVNT_ID 0xd0044 +/* [RW 18] Indirect access to the XX table of the XX protection mechanism. + The fields are: [5:0] - tail pointer; 11:6] - Link List size; 17:12] - + header pointer. */ +#define CCM_REG_XX_TABLE 0xd0280 +#define CDU_REG_CDU_CHK_MASK0 0x101000 +#define CDU_REG_CDU_CHK_MASK1 0x101004 +#define CDU_REG_CDU_CONTROL0 0x101008 +#define CDU_REG_CDU_DEBUG 0x101010 +#define CDU_REG_CDU_GLOBAL_PARAMS 0x101020 +/* [RW 7] Interrupt mask register #0 read/write */ +#define CDU_REG_CDU_INT_MASK 0x10103c +/* [R 7] Interrupt register #0 read */ +#define CDU_REG_CDU_INT_STS 0x101030 +/* [RW 5] Parity mask register #0 read/write */ +#define CDU_REG_CDU_PRTY_MASK 0x10104c +/* [RC 32] logging of error data in case of a CDU load error: + {expected_cid[15:0]; xpected_type[2:0]; xpected_region[2:0]; ctive_error; + ype_error; ctual_active; ctual_compressed_context}; */ +#define CDU_REG_ERROR_DATA 0x101014 +/* [WB 216] L1TT ram access. each entry has the following format : + {mrege_regions[7:0]; ffset12[5:0]...offset0[5:0]; + ength12[5:0]...length0[5:0]; d12[3:0]...id0[3:0]} */ +#define CDU_REG_L1TT 0x101800 +/* [WB 24] MATT ram access. each entry has the following + format:{RegionLength[11:0]; egionOffset[11:0]} */ +#define CDU_REG_MATT 0x101100 +/* [R 1] indication the initializing the activity counter by the hardware + was done. */ +#define CFC_REG_AC_INIT_DONE 0x104078 +/* [RW 13] activity counter ram access */ +#define CFC_REG_ACTIVITY_COUNTER 0x104400 +#define CFC_REG_ACTIVITY_COUNTER_SIZE 256 +/* [R 1] indication the initializing the cams by the hardware was done. */ +#define CFC_REG_CAM_INIT_DONE 0x10407c +/* [RW 2] Interrupt mask register #0 read/write */ +#define CFC_REG_CFC_INT_MASK 0x104108 +/* [R 2] Interrupt register #0 read */ +#define CFC_REG_CFC_INT_STS 0x1040fc +/* [RC 2] Interrupt register #0 read clear */ +#define CFC_REG_CFC_INT_STS_CLR 0x104100 +/* [RW 4] Parity mask register #0 read/write */ +#define CFC_REG_CFC_PRTY_MASK 0x104118 +/* [RW 21] CID cam access (21:1 - Data; alid - 0) */ +#define CFC_REG_CID_CAM 0x104800 +#define CFC_REG_CONTROL0 0x104028 +#define CFC_REG_DEBUG0 0x104050 +/* [RW 14] indicates per error (in #cfc_registers_cfc_error_vector.cfc_error + vector) whether the cfc should be disabled upon it */ +#define CFC_REG_DISABLE_ON_ERROR 0x104044 +/* [RC 14] CFC error vector. when the CFC detects an internal error it will + set one of these bits. the bit description can be found in CFC + specifications */ +#define CFC_REG_ERROR_VECTOR 0x10403c +#define CFC_REG_INIT_REG 0x10404c +/* [RW 24] {weight_load_client7[2:0] to weight_load_client0[2:0]}. this + field allows changing the priorities of the weighted-round-robin arbiter + which selects which CFC load client should be served next */ +#define CFC_REG_LCREQ_WEIGHTS 0x104084 +/* [R 1] indication the initializing the link list by the hardware was done. */ +#define CFC_REG_LL_INIT_DONE 0x104074 +/* [R 9] Number of allocated LCIDs which are at empty state */ +#define CFC_REG_NUM_LCIDS_ALLOC 0x104020 +/* [R 9] Number of Arriving LCIDs in Link List Block */ +#define CFC_REG_NUM_LCIDS_ARRIVING 0x104004 +/* [R 9] Number of Inside LCIDs in Link List Block */ +#define CFC_REG_NUM_LCIDS_INSIDE 0x104008 +/* [R 9] Number of Leaving LCIDs in Link List Block */ +#define CFC_REG_NUM_LCIDS_LEAVING 0x104018 +/* [RW 8] The event id for aggregated interrupt 0 */ +#define CSDM_REG_AGG_INT_EVENT_0 0xc2038 +/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */ +#define CSDM_REG_CFC_RSP_START_ADDR 0xc2008 +/* [RW 16] The maximum value of the competion counter #0 */ +#define CSDM_REG_CMP_COUNTER_MAX0 0xc201c +/* [RW 16] The maximum value of the competion counter #1 */ +#define CSDM_REG_CMP_COUNTER_MAX1 0xc2020 +/* [RW 16] The maximum value of the competion counter #2 */ +#define CSDM_REG_CMP_COUNTER_MAX2 0xc2024 +/* [RW 16] The maximum value of the competion counter #3 */ +#define CSDM_REG_CMP_COUNTER_MAX3 0xc2028 +/* [RW 13] The start address in the internal RAM for the completion + counters. */ +#define CSDM_REG_CMP_COUNTER_START_ADDR 0xc200c +/* [RW 32] Interrupt mask register #0 read/write */ +#define CSDM_REG_CSDM_INT_MASK_0 0xc229c +#define CSDM_REG_CSDM_INT_MASK_1 0xc22ac +/* [RW 11] Parity mask register #0 read/write */ +#define CSDM_REG_CSDM_PRTY_MASK 0xc22bc +#define CSDM_REG_ENABLE_IN1 0xc2238 +#define CSDM_REG_ENABLE_IN2 0xc223c +#define CSDM_REG_ENABLE_OUT1 0xc2240 +#define CSDM_REG_ENABLE_OUT2 0xc2244 +/* [RW 4] The initial number of messages that can be sent to the pxp control + interface without receiving any ACK. */ +#define CSDM_REG_INIT_CREDIT_PXP_CTRL 0xc24bc +/* [ST 32] The number of ACK after placement messages received */ +#define CSDM_REG_NUM_OF_ACK_AFTER_PLACE 0xc227c +/* [ST 32] The number of packet end messages received from the parser */ +#define CSDM_REG_NUM_OF_PKT_END_MSG 0xc2274 +/* [ST 32] The number of requests received from the pxp async if */ +#define CSDM_REG_NUM_OF_PXP_ASYNC_REQ 0xc2278 +/* [ST 32] The number of commands received in queue 0 */ +#define CSDM_REG_NUM_OF_Q0_CMD 0xc2248 +/* [ST 32] The number of commands received in queue 10 */ +#define CSDM_REG_NUM_OF_Q10_CMD 0xc226c +/* [ST 32] The number of commands received in queue 11 */ +#define CSDM_REG_NUM_OF_Q11_CMD 0xc2270 +/* [ST 32] The number of commands received in queue 1 */ +#define CSDM_REG_NUM_OF_Q1_CMD 0xc224c +/* [ST 32] The number of commands received in queue 3 */ +#define CSDM_REG_NUM_OF_Q3_CMD 0xc2250 +/* [ST 32] The number of commands received in queue 4 */ +#define CSDM_REG_NUM_OF_Q4_CMD 0xc2254 +/* [ST 32] The number of commands received in queue 5 */ +#define CSDM_REG_NUM_OF_Q5_CMD 0xc2258 +/* [ST 32] The number of commands received in queue 6 */ +#define CSDM_REG_NUM_OF_Q6_CMD 0xc225c +/* [ST 32] The number of commands received in queue 7 */ +#define CSDM_REG_NUM_OF_Q7_CMD 0xc2260 +/* [ST 32] The number of commands received in queue 8 */ +#define CSDM_REG_NUM_OF_Q8_CMD 0xc2264 +/* [ST 32] The number of commands received in queue 9 */ +#define CSDM_REG_NUM_OF_Q9_CMD 0xc2268 +/* [RW 13] The start address in the internal RAM for queue counters */ +#define CSDM_REG_Q_COUNTER_START_ADDR 0xc2010 +/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */ +#define CSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0xc2548 +/* [R 1] parser fifo empty in sdm_sync block */ +#define CSDM_REG_SYNC_PARSER_EMPTY 0xc2550 +/* [R 1] parser serial fifo empty in sdm_sync block */ +#define CSDM_REG_SYNC_SYNC_EMPTY 0xc2558 +/* [RW 32] Tick for timer counter. Applicable only when + ~csdm_registers_timer_tick_enable.timer_tick_enable =1 */ +#define CSDM_REG_TIMER_TICK 0xc2000 +/* [RW 5] The number of time_slots in the arbitration cycle */ +#define CSEM_REG_ARB_CYCLE_SIZE 0x200034 +/* [RW 3] The source that is associated with arbitration element 0. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2 */ +#define CSEM_REG_ARB_ELEMENT0 0x200020 +/* [RW 3] The source that is associated with arbitration element 1. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~csem_registers_arb_element0.arb_element0 */ +#define CSEM_REG_ARB_ELEMENT1 0x200024 +/* [RW 3] The source that is associated with arbitration element 2. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~csem_registers_arb_element0.arb_element0 + and ~csem_registers_arb_element1.arb_element1 */ +#define CSEM_REG_ARB_ELEMENT2 0x200028 +/* [RW 3] The source that is associated with arbitration element 3. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2.Could + not be equal to register ~csem_registers_arb_element0.arb_element0 and + ~csem_registers_arb_element1.arb_element1 and + ~csem_registers_arb_element2.arb_element2 */ +#define CSEM_REG_ARB_ELEMENT3 0x20002c +/* [RW 3] The source that is associated with arbitration element 4. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~csem_registers_arb_element0.arb_element0 + and ~csem_registers_arb_element1.arb_element1 and + ~csem_registers_arb_element2.arb_element2 and + ~csem_registers_arb_element3.arb_element3 */ +#define CSEM_REG_ARB_ELEMENT4 0x200030 +/* [RW 32] Interrupt mask register #0 read/write */ +#define CSEM_REG_CSEM_INT_MASK_0 0x200110 +#define CSEM_REG_CSEM_INT_MASK_1 0x200120 +/* [RW 32] Parity mask register #0 read/write */ +#define CSEM_REG_CSEM_PRTY_MASK_0 0x200130 +#define CSEM_REG_CSEM_PRTY_MASK_1 0x200140 +#define CSEM_REG_ENABLE_IN 0x2000a4 +#define CSEM_REG_ENABLE_OUT 0x2000a8 +/* [RW 32] This address space contains all registers and memories that are + placed in SEM_FAST block. The SEM_FAST registers are described in + appendix B. In order to access the SEM_FAST registers the base address + CSEM_REGISTERS_FAST_MEMORY (Offset: 0x220000) should be added to each + SEM_FAST register offset. */ +#define CSEM_REG_FAST_MEMORY 0x220000 +/* [RW 1] Disables input messages from FIC0 May be updated during run_time + by the microcode */ +#define CSEM_REG_FIC0_DISABLE 0x200224 +/* [RW 1] Disables input messages from FIC1 May be updated during run_time + by the microcode */ +#define CSEM_REG_FIC1_DISABLE 0x200234 +/* [RW 15] Interrupt table Read and write access to it is not possible in + the middle of the work */ +#define CSEM_REG_INT_TABLE 0x200400 +/* [ST 24] Statistics register. The number of messages that entered through + FIC0 */ +#define CSEM_REG_MSG_NUM_FIC0 0x200000 +/* [ST 24] Statistics register. The number of messages that entered through + FIC1 */ +#define CSEM_REG_MSG_NUM_FIC1 0x200004 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC0 */ +#define CSEM_REG_MSG_NUM_FOC0 0x200008 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC1 */ +#define CSEM_REG_MSG_NUM_FOC1 0x20000c +/* [ST 24] Statistics register. The number of messages that were sent to + FOC2 */ +#define CSEM_REG_MSG_NUM_FOC2 0x200010 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC3 */ +#define CSEM_REG_MSG_NUM_FOC3 0x200014 +/* [RW 1] Disables input messages from the passive buffer May be updated + during run_time by the microcode */ +#define CSEM_REG_PAS_DISABLE 0x20024c +/* [WB 128] Debug only. Passive buffer memory */ +#define CSEM_REG_PASSIVE_BUFFER 0x202000 +/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */ +#define CSEM_REG_PRAM 0x240000 +/* [R 16] Valid sleeping threads indication have bit per thread */ +#define CSEM_REG_SLEEP_THREADS_VALID 0x20026c +/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */ +#define CSEM_REG_SLOW_EXT_STORE_EMPTY 0x2002a0 +/* [RW 16] List of free threads . There is a bit per thread. */ +#define CSEM_REG_THREADS_LIST 0x2002e4 +/* [RW 3] The arbitration scheme of time_slot 0 */ +#define CSEM_REG_TS_0_AS 0x200038 +/* [RW 3] The arbitration scheme of time_slot 10 */ +#define CSEM_REG_TS_10_AS 0x200060 +/* [RW 3] The arbitration scheme of time_slot 11 */ +#define CSEM_REG_TS_11_AS 0x200064 +/* [RW 3] The arbitration scheme of time_slot 12 */ +#define CSEM_REG_TS_12_AS 0x200068 +/* [RW 3] The arbitration scheme of time_slot 13 */ +#define CSEM_REG_TS_13_AS 0x20006c +/* [RW 3] The arbitration scheme of time_slot 14 */ +#define CSEM_REG_TS_14_AS 0x200070 +/* [RW 3] The arbitration scheme of time_slot 15 */ +#define CSEM_REG_TS_15_AS 0x200074 +/* [RW 3] The arbitration scheme of time_slot 16 */ +#define CSEM_REG_TS_16_AS 0x200078 +/* [RW 3] The arbitration scheme of time_slot 17 */ +#define CSEM_REG_TS_17_AS 0x20007c +/* [RW 3] The arbitration scheme of time_slot 18 */ +#define CSEM_REG_TS_18_AS 0x200080 +/* [RW 3] The arbitration scheme of time_slot 1 */ +#define CSEM_REG_TS_1_AS 0x20003c +/* [RW 3] The arbitration scheme of time_slot 2 */ +#define CSEM_REG_TS_2_AS 0x200040 +/* [RW 3] The arbitration scheme of time_slot 3 */ +#define CSEM_REG_TS_3_AS 0x200044 +/* [RW 3] The arbitration scheme of time_slot 4 */ +#define CSEM_REG_TS_4_AS 0x200048 +/* [RW 3] The arbitration scheme of time_slot 5 */ +#define CSEM_REG_TS_5_AS 0x20004c +/* [RW 3] The arbitration scheme of time_slot 6 */ +#define CSEM_REG_TS_6_AS 0x200050 +/* [RW 3] The arbitration scheme of time_slot 7 */ +#define CSEM_REG_TS_7_AS 0x200054 +/* [RW 3] The arbitration scheme of time_slot 8 */ +#define CSEM_REG_TS_8_AS 0x200058 +/* [RW 3] The arbitration scheme of time_slot 9 */ +#define CSEM_REG_TS_9_AS 0x20005c +/* [RW 1] Parity mask register #0 read/write */ +#define DBG_REG_DBG_PRTY_MASK 0xc0a8 +/* [RW 2] debug only: These bits indicate the credit for PCI request type 4 + interface; MUST be configured AFTER pci_ext_buffer_strt_addr_lsb/msb are + configured */ +#define DBG_REG_PCI_REQ_CREDIT 0xc120 +/* [RW 32] Commands memory. The address to command X; row Y is to calculated + as 14*X+Y. */ +#define DMAE_REG_CMD_MEM 0x102400 +/* [RW 1] If 0 - the CRC-16c initial value is all zeroes; if 1 - the CRC-16c + initial value is all ones. */ +#define DMAE_REG_CRC16C_INIT 0x10201c +/* [RW 1] If 0 - the CRC-16 T10 initial value is all zeroes; if 1 - the + CRC-16 T10 initial value is all ones. */ +#define DMAE_REG_CRC16T10_INIT 0x102020 +/* [RW 2] Interrupt mask register #0 read/write */ +#define DMAE_REG_DMAE_INT_MASK 0x102054 +/* [RW 4] Parity mask register #0 read/write */ +#define DMAE_REG_DMAE_PRTY_MASK 0x102064 +/* [RW 1] Command 0 go. */ +#define DMAE_REG_GO_C0 0x102080 +/* [RW 1] Command 1 go. */ +#define DMAE_REG_GO_C1 0x102084 +/* [RW 1] Command 10 go. */ +#define DMAE_REG_GO_C10 0x102088 +#define DMAE_REG_GO_C10_SIZE 1 +/* [RW 1] Command 11 go. */ +#define DMAE_REG_GO_C11 0x10208c +#define DMAE_REG_GO_C11_SIZE 1 +/* [RW 1] Command 12 go. */ +#define DMAE_REG_GO_C12 0x102090 +#define DMAE_REG_GO_C12_SIZE 1 +/* [RW 1] Command 13 go. */ +#define DMAE_REG_GO_C13 0x102094 +#define DMAE_REG_GO_C13_SIZE 1 +/* [RW 1] Command 14 go. */ +#define DMAE_REG_GO_C14 0x102098 +#define DMAE_REG_GO_C14_SIZE 1 +/* [RW 1] Command 15 go. */ +#define DMAE_REG_GO_C15 0x10209c +#define DMAE_REG_GO_C15_SIZE 1 +/* [RW 1] Command 10 go. */ +#define DMAE_REG_GO_C10 0x102088 +/* [RW 1] Command 11 go. */ +#define DMAE_REG_GO_C11 0x10208c +/* [RW 1] Command 12 go. */ +#define DMAE_REG_GO_C12 0x102090 +/* [RW 1] Command 13 go. */ +#define DMAE_REG_GO_C13 0x102094 +/* [RW 1] Command 14 go. */ +#define DMAE_REG_GO_C14 0x102098 +/* [RW 1] Command 15 go. */ +#define DMAE_REG_GO_C15 0x10209c +/* [RW 1] Command 2 go. */ +#define DMAE_REG_GO_C2 0x1020a0 +/* [RW 1] Command 3 go. */ +#define DMAE_REG_GO_C3 0x1020a4 +/* [RW 1] Command 4 go. */ +#define DMAE_REG_GO_C4 0x1020a8 +/* [RW 1] Command 5 go. */ +#define DMAE_REG_GO_C5 0x1020ac +/* [RW 1] Command 6 go. */ +#define DMAE_REG_GO_C6 0x1020b0 +/* [RW 1] Command 7 go. */ +#define DMAE_REG_GO_C7 0x1020b4 +/* [RW 1] Command 8 go. */ +#define DMAE_REG_GO_C8 0x1020b8 +/* [RW 1] Command 9 go. */ +#define DMAE_REG_GO_C9 0x1020bc +/* [RW 1] DMAE GRC Interface (Target; aster) enable. If 0 - the acknowledge + input is disregarded; valid is deasserted; all other signals are treated + as usual; if 1 - normal activity. */ +#define DMAE_REG_GRC_IFEN 0x102008 +/* [RW 1] DMAE PCI Interface (Request; ead; rite) enable. If 0 - the + acknowledge input is disregarded; valid is deasserted; full is asserted; + all other signals are treated as usual; if 1 - normal activity. */ +#define DMAE_REG_PCI_IFEN 0x102004 +/* [RW 4] DMAE- PCI Request Interface initial credit. Write writes the + initial value to the credit counter; related to the address. Read returns + the current value of the counter. */ +#define DMAE_REG_PXP_REQ_INIT_CRD 0x1020c0 +/* [RW 8] Aggregation command. */ +#define DORQ_REG_AGG_CMD0 0x170060 +/* [RW 8] Aggregation command. */ +#define DORQ_REG_AGG_CMD1 0x170064 +/* [RW 8] Aggregation command. */ +#define DORQ_REG_AGG_CMD2 0x170068 +/* [RW 8] Aggregation command. */ +#define DORQ_REG_AGG_CMD3 0x17006c +/* [RW 28] UCM Header. */ +#define DORQ_REG_CMHEAD_RX 0x170050 +/* [RW 5] Interrupt mask register #0 read/write */ +#define DORQ_REG_DORQ_INT_MASK 0x170180 +/* [R 5] Interrupt register #0 read */ +#define DORQ_REG_DORQ_INT_STS 0x170174 +/* [RC 5] Interrupt register #0 read clear */ +#define DORQ_REG_DORQ_INT_STS_CLR 0x170178 +/* [RW 2] Parity mask register #0 read/write */ +#define DORQ_REG_DORQ_PRTY_MASK 0x170190 +/* [RW 8] The address to write the DPM CID to STORM. */ +#define DORQ_REG_DPM_CID_ADDR 0x170044 +/* [RW 5] The DPM mode CID extraction offset. */ +#define DORQ_REG_DPM_CID_OFST 0x170030 +/* [RW 12] The threshold of the DQ FIFO to send the almost full interrupt. */ +#define DORQ_REG_DQ_FIFO_AFULL_TH 0x17007c +/* [RW 12] The threshold of the DQ FIFO to send the full interrupt. */ +#define DORQ_REG_DQ_FIFO_FULL_TH 0x170078 +/* [R 13] Current value of the DQ FIFO fill level according to following + pointer. The range is 0 - 256 FIFO rows; where each row stands for the + doorbell. */ +#define DORQ_REG_DQ_FILL_LVLF 0x1700a4 +/* [R 1] DQ FIFO full status. Is set; when FIFO filling level is more or + equal to full threshold; reset on full clear. */ +#define DORQ_REG_DQ_FULL_ST 0x1700c0 +/* [RW 28] The value sent to CM header in the case of CFC load error. */ +#define DORQ_REG_ERR_CMHEAD 0x170058 +#define DORQ_REG_IF_EN 0x170004 +#define DORQ_REG_MODE_ACT 0x170008 +/* [RW 5] The normal mode CID extraction offset. */ +#define DORQ_REG_NORM_CID_OFST 0x17002c +/* [RW 28] TCM Header when only TCP context is loaded. */ +#define DORQ_REG_NORM_CMHEAD_TX 0x17004c +/* [RW 3] The number of simultaneous outstanding requests to Context Fetch + Interface. */ +#define DORQ_REG_OUTST_REQ 0x17003c +#define DORQ_REG_REGN 0x170038 +/* [R 4] Current value of response A counter credit. Initial credit is + configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd + register. */ +#define DORQ_REG_RSPA_CRD_CNT 0x1700ac +/* [R 4] Current value of response B counter credit. Initial credit is + configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd + register. */ +#define DORQ_REG_RSPB_CRD_CNT 0x1700b0 +/* [RW 4] The initial credit at the Doorbell Response Interface. The write + writes the same initial credit to the rspa_crd_cnt and rspb_crd_cnt. The + read reads this written value. */ +#define DORQ_REG_RSP_INIT_CRD 0x170048 +/* [RW 4] Initial activity counter value on the load request; when the + shortcut is done. */ +#define DORQ_REG_SHRT_ACT_CNT 0x170070 +/* [RW 28] TCM Header when both ULP and TCP context is loaded. */ +#define DORQ_REG_SHRT_CMHEAD 0x170054 +#define HC_CONFIG_0_REG_ATTN_BIT_EN_0 (0x1<<4) +#define HC_CONFIG_0_REG_INT_LINE_EN_0 (0x1<<3) +#define HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 (0x1<<2) +#define HC_CONFIG_0_REG_SINGLE_ISR_EN_0 (0x1<<1) +#define HC_REG_AGG_INT_0 0x108050 +#define HC_REG_AGG_INT_1 0x108054 +/* [RW 16] attention bit and attention acknowledge bits status for port 0 + and 1 according to the following address map: addr 0 - attn_bit_0; addr 1 + - attn_ack_bit_0; addr 2 - attn_bit_1; addr 3 - attn_ack_bit_1; */ +#define HC_REG_ATTN_BIT 0x108120 +/* [RW 16] attn bits status index for attn bit msg; addr 0 - function 0; + addr 1 - functin 1 */ +#define HC_REG_ATTN_IDX 0x108100 +/* [RW 32] port 0 lower 32 bits address field for attn messag. */ +#define HC_REG_ATTN_MSG0_ADDR_L 0x108018 +/* [RW 32] port 1 lower 32 bits address field for attn messag. */ +#define HC_REG_ATTN_MSG1_ADDR_L 0x108020 +/* [RW 8] status block number for attn bit msg - function 0; */ +#define HC_REG_ATTN_NUM_P0 0x108038 +/* [RW 8] status block number for attn bit msg - function 1 */ +#define HC_REG_ATTN_NUM_P1 0x10803c +#define HC_REG_CONFIG_0 0x108000 +#define HC_REG_CONFIG_1 0x108004 +/* [RW 3] Parity mask register #0 read/write */ +#define HC_REG_HC_PRTY_MASK 0x1080a0 +/* [RW 17] status block interrupt mask; one in each bit means unmask; zerow + in each bit means mask; bit 0 - default SB; bit 1 - SB_0; bit 2 - SB_1... + bit 16- SB_15; addr 0 - port 0; addr 1 - port 1 */ +#define HC_REG_INT_MASK 0x108108 +/* [RW 16] port 0 attn bit condition monitoring; each bit that is set will + lock a change fron 0 to 1 in the corresponding attention signals that + comes from the AEU */ +#define HC_REG_LEADING_EDGE_0 0x108040 +#define HC_REG_LEADING_EDGE_1 0x108048 +/* [RW 16] all producer and consumer of port 0 according to the following + addresses; U_prod: 0-15; C_prod: 16-31; U_cons: 32-47; C_cons:48-63; + Defoult_prod: U/C/X/T/Attn-64/65/66/67/68; Defoult_cons: + U/C/X/T/Attn-69/70/71/72/73 */ +#define HC_REG_P0_PROD_CONS 0x108200 +/* [RW 16] all producer and consumer of port 1according to the following + addresses; U_prod: 0-15; C_prod: 16-31; U_cons: 32-47; C_cons:48-63; + Defoult_prod: U/C/X/T/Attn-64/65/66/67/68; Defoult_cons: + U/C/X/T/Attn-69/70/71/72/73 */ +#define HC_REG_P1_PROD_CONS 0x108400 +/* [W 1] This register is write only and has 4 addresses as follow: 0 = + clear all PBA bits port 0; 1 = clear all pending interrupts request + port0; 2 = clear all PBA bits port 1; 3 = clear all pending interrupts + request port1; here is no meaning for the data in this register */ +#define HC_REG_PBA_COMMAND 0x108140 +#define HC_REG_PCI_CONFIG_0 0x108010 +#define HC_REG_PCI_CONFIG_1 0x108014 +/* [RW 24] all counters acording to the following address: LSB: 0=read; 1= + read_clear; 0-71 = HW counters (the inside order is the same as the + interrupt table in the spec); 72-219 = SW counters 1 (stops after first + consumer upd) the inside order is: 72-103 - U_non_default_p0; 104-135 + C_non_defaul_p0; 36-145 U/C/X/T/Attn_default_p0; 146-177 + U_non_default_p1; 178-209 C_non_defaul_p1; 10-219 U/C/X/T/Attn_default_p1 + ; 220-367 = SW counters 2 (stops when prod=cons) the inside order is: + 220-251 - U_non_default_p0; 252-283 C_non_defaul_p0; 84-293 + U/C/X/T/Attn_default_p0; 294-325 U_non_default_p1; 326-357 + C_non_defaul_p1; 58-367 U/C/X/T/Attn_default_p1 ; 368-515 = mailbox + counters; (the inside order of the mailbox counter is 368-431 U and C + non_default_p0; 432-441 U/C/X/T/Attn_default_p0; 442-505 U and C + non_default_p1; 506-515 U/C/X/T/Attn_default_p1) */ +#define HC_REG_STATISTIC_COUNTERS 0x109000 +/* [RW 16] port 0 attn bit condition monitoring; each bit that is set will + lock a change fron 1 to 0 in the corresponding attention signals that + comes from the AEU */ +#define HC_REG_TRAILING_EDGE_0 0x108044 +#define HC_REG_TRAILING_EDGE_1 0x10804c +#define HC_REG_UC_RAM_ADDR_0 0x108028 +#define HC_REG_UC_RAM_ADDR_1 0x108030 +/* [RW 16] ustorm address for coalesc now message */ +#define HC_REG_USTORM_ADDR_FOR_COALESCE 0x108068 +#define HC_REG_VQID_0 0x108008 +#define HC_REG_VQID_1 0x10800c +#define MCP_REG_MCPR_NVM_ACCESS_ENABLE 0x86424 +#define MCP_REG_MCPR_NVM_ADDR 0x8640c +#define MCP_REG_MCPR_NVM_CFG4 0x8642c +#define MCP_REG_MCPR_NVM_COMMAND 0x86400 +#define MCP_REG_MCPR_NVM_READ 0x86410 +#define MCP_REG_MCPR_NVM_SW_ARB 0x86420 +#define MCP_REG_MCPR_NVM_WRITE 0x86408 +#define MCP_REG_MCPR_NVM_WRITE1 0x86428 +#define MCP_REG_MCPR_SCRATCH 0xa0000 +/* [R 32] read first 32 bit after inversion of function 0. mapped as + follows: [0] NIG attention for function0; [1] NIG attention for + function1; [2] GPIO1 mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; + [6] GPIO1 function 1; [7] GPIO2 function 1; [8] GPIO3 function 1; [9] + GPIO4 function 1; [10] PCIE glue/PXP VPD event function0; [11] PCIE + glue/PXP VPD event function1; [12] PCIE glue/PXP Expansion ROM event0; + [13] PCIE glue/PXP Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] + MSI/X indication for mcp; [17] MSI/X indication for function 1; [18] BRB + Parity error; [19] BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw + interrupt; [22] SRC Parity error; [23] SRC Hw interrupt; [24] TSDM Parity + error; [25] TSDM Hw interrupt; [26] TCM Parity error; [27] TCM Hw + interrupt; [28] TSEMI Parity error; [29] TSEMI Hw interrupt; [30] PBF + Parity error; [31] PBF Hw interrupt; */ +#define MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 0xa42c +#define MISC_REG_AEU_AFTER_INVERT_1_FUNC_1 0xa430 +/* [R 32] read first 32 bit after inversion of mcp. mapped as follows: [0] + NIG attention for function0; [1] NIG attention for function1; [2] GPIO1 + mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1; + [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10] + PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event + function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP + Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for + mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19] + BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC + Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw + interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI + Parity error; [29] TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw + interrupt; */ +#define MISC_REG_AEU_AFTER_INVERT_1_MCP 0xa434 +/* [R 32] read second 32 bit after inversion of function 0. mapped as + follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM + Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw + interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity + error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw + interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] + NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; + [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw + interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM + Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI + Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM + Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw + interrupt; */ +#define MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 0xa438 +#define MISC_REG_AEU_AFTER_INVERT_2_FUNC_1 0xa43c +/* [R 32] read second 32 bit after inversion of mcp. mapped as follows: [0] + PBClient Parity error; [1] PBClient Hw interrupt; [2] QM Parity error; + [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw interrupt; + [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9] + XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12] + DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity + error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux + PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt; + [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error; + [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt; + [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error; + [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt; */ +#define MISC_REG_AEU_AFTER_INVERT_2_MCP 0xa440 +/* [R 32] read third 32 bit after inversion of function 0. mapped as + follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity + error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; [5] + PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw + interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity + error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) + Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16] + pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20] + MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23] + SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW + timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 + func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General + attn1; */ +#define MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 0xa444 +#define MISC_REG_AEU_AFTER_INVERT_3_FUNC_1 0xa448 +/* [R 32] read third 32 bit after inversion of mcp. mapped as follows: [0] + CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity error; [3] PXP + Hw interrupt; [4] PXPpciClockClient Parity error; [5] PXPpciClockClient + Hw interrupt; [6] CFC Parity error; [7] CFC Hw interrupt; [8] CDU Parity + error; [9] CDU Hw interrupt; [10] DMAE Parity error; [11] DMAE Hw + interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) Hw interrupt; [14] + MISC Parity error; [15] MISC Hw interrupt; [16] pxp_misc_mps_attn; [17] + Flash event; [18] SMB event; [19] MCP attn0; [20] MCP attn1; [21] SW + timers attn_1 func0; [22] SW timers attn_2 func0; [23] SW timers attn_3 + func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW timers attn_1 + func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 func1; [29] SW + timers attn_4 func1; [30] General attn0; [31] General attn1; */ +#define MISC_REG_AEU_AFTER_INVERT_3_MCP 0xa44c +/* [R 32] read fourth 32 bit after inversion of function 0. mapped as + follows: [0] General attn2; [1] General attn3; [2] General attn4; [3] + General attn5; [4] General attn6; [5] General attn7; [6] General attn8; + [7] General attn9; [8] General attn10; [9] General attn11; [10] General + attn12; [11] General attn13; [12] General attn14; [13] General attn15; + [14] General attn16; [15] General attn17; [16] General attn18; [17] + General attn19; [18] General attn20; [19] General attn21; [20] Main power + interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN + Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC + Latched timeout attention; [27] GRC Latched reserved access attention; + [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP + Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ +#define MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 0xa450 +#define MISC_REG_AEU_AFTER_INVERT_4_FUNC_1 0xa454 +/* [R 32] read fourth 32 bit after inversion of mcp. mapped as follows: [0] + General attn2; [1] General attn3; [2] General attn4; [3] General attn5; + [4] General attn6; [5] General attn7; [6] General attn8; [7] General + attn9; [8] General attn10; [9] General attn11; [10] General attn12; [11] + General attn13; [12] General attn14; [13] General attn15; [14] General + attn16; [15] General attn17; [16] General attn18; [17] General attn19; + [18] General attn20; [19] General attn21; [20] Main power interrupt; [21] + RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN Latched attn; [24] + RBCU Latched attn; [25] RBCP Latched attn; [26] GRC Latched timeout + attention; [27] GRC Latched reserved access attention; [28] MCP Latched + rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP Latched + ump_tx_parity; [31] MCP Latched scpad_parity; */ +#define MISC_REG_AEU_AFTER_INVERT_4_MCP 0xa458 +/* [W 11] write to this register results with the clear of the latched + signals; one in d0 clears RBCR latch; one in d1 clears RBCT latch; one in + d2 clears RBCN latch; one in d3 clears RBCU latch; one in d4 clears RBCP + latch; one in d5 clears GRC Latched timeout attention; one in d6 clears + GRC Latched reserved access attention; one in d7 clears Latched + rom_parity; one in d8 clears Latched ump_rx_parity; one in d9 clears + Latched ump_tx_parity; one in d10 clears Latched scpad_parity; read from + this register return zero */ +#define MISC_REG_AEU_CLR_LATCH_SIGNAL 0xa45c +/* [RW 32] first 32b for enabling the output for function 0 output0. mapped + as follows: [0] NIG attention for function0; [1] NIG attention for + function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function + 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8] + GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event + function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP + Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14] + SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X + indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; + [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] + SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] + TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] + TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */ +#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0 0xa06c +#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1 0xa07c +#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_3 0xa09c +/* [RW 32] first 32b for enabling the output for function 1 output0. mapped + as follows: [0] NIG attention for function0; [1] NIG attention for + function1; [2] GPIO1 function 1; [3] GPIO2 function 1; [4] GPIO3 function + 1; [5] GPIO4 function 1; [6] GPIO1 function 1; [7] GPIO2 function 1; [8] + GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event + function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP + Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14] + SPIO4; [15] SPIO5; [16] MSI/X indication for function 1; [17] MSI/X + indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; + [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] + SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] + TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] + TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */ +#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 0xa10c +#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 0xa11c +#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_3 0xa13c +/* [RW 32] first 32b for enabling the output for close the gate nig 0. + mapped as follows: [0] NIG attention for function0; [1] NIG attention for + function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function + 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8] + GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event + function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP + Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14] + SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X + indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; + [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] + SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] + TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] + TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */ +#define MISC_REG_AEU_ENABLE1_NIG_0 0xa0ec +#define MISC_REG_AEU_ENABLE1_NIG_1 0xa18c +/* [RW 32] first 32b for enabling the output for close the gate pxp 0. + mapped as follows: [0] NIG attention for function0; [1] NIG attention for + function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function + 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8] + GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event + function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP + Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14] + SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X + indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; + [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] + SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] + TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] + TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */ +#define MISC_REG_AEU_ENABLE1_PXP_0 0xa0fc +#define MISC_REG_AEU_ENABLE1_PXP_1 0xa19c +/* [RW 32] second 32b for enabling the output for function 0 output0. mapped + as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM + Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw + interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity + error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw + interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] + NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; + [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw + interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM + Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI + Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM + Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw + interrupt; */ +#define MISC_REG_AEU_ENABLE2_FUNC_0_OUT_0 0xa070 +#define MISC_REG_AEU_ENABLE2_FUNC_0_OUT_1 0xa080 +/* [RW 32] second 32b for enabling the output for function 1 output0. mapped + as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM + Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw + interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity + error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw + interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] + NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; + [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw + interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM + Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI + Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM + Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw + interrupt; */ +#define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_0 0xa110 +#define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_1 0xa120 +/* [RW 32] second 32b for enabling the output for close the gate nig 0. + mapped as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; + [2] QM Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] + Timers Hw interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] + XCM Parity error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] + XSEMI Hw interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw + interrupt; [14] NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI + core Parity error; [17] Vaux PCI core Hw interrupt; [18] Debug Parity + error; [19] Debug Hw interrupt; [20] USDM Parity error; [21] USDM Hw + interrupt; [22] UCM Parity error; [23] UCM Hw interrupt; [24] USEMI + Parity error; [25] USEMI Hw interrupt; [26] UPB Parity error; [27] UPB Hw + interrupt; [28] CSDM Parity error; [29] CSDM Hw interrupt; [30] CCM + Parity error; [31] CCM Hw interrupt; */ +#define MISC_REG_AEU_ENABLE2_NIG_0 0xa0f0 +#define MISC_REG_AEU_ENABLE2_NIG_1 0xa190 +/* [RW 32] second 32b for enabling the output for close the gate pxp 0. + mapped as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; + [2] QM Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] + Timers Hw interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] + XCM Parity error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] + XSEMI Hw interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw + interrupt; [14] NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI + core Parity error; [17] Vaux PCI core Hw interrupt; [18] Debug Parity + error; [19] Debug Hw interrupt; [20] USDM Parity error; [21] USDM Hw + interrupt; [22] UCM Parity error; [23] UCM Hw interrupt; [24] USEMI + Parity error; [25] USEMI Hw interrupt; [26] UPB Parity error; [27] UPB Hw + interrupt; [28] CSDM Parity error; [29] CSDM Hw interrupt; [30] CCM + Parity error; [31] CCM Hw interrupt; */ +#define MISC_REG_AEU_ENABLE2_PXP_0 0xa100 +#define MISC_REG_AEU_ENABLE2_PXP_1 0xa1a0 +/* [RW 32] third 32b for enabling the output for function 0 output0. mapped + as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP + Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; + [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw + interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity + error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) + Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16] + pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20] + MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23] + SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW + timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 + func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General + attn1; */ +#define MISC_REG_AEU_ENABLE3_FUNC_0_OUT_0 0xa074 +#define MISC_REG_AEU_ENABLE3_FUNC_0_OUT_1 0xa084 +/* [RW 32] third 32b for enabling the output for function 1 output0. mapped + as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP + Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; + [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw + interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity + error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) + Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16] + pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20] + MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23] + SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW + timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 + func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General + attn1; */ +#define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_0 0xa114 +#define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_1 0xa124 +/* [RW 32] third 32b for enabling the output for close the gate nig 0. + mapped as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] + PXP Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity + error; [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC + Hw interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE + Parity error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] + IGU (HC) Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; + [16] pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; + [20] MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; + [23] SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; + [26] SW timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers + attn_3 func1; [29] SW timers attn_4 func1; [30] General attn0; [31] + General attn1; */ +#define MISC_REG_AEU_ENABLE3_NIG_0 0xa0f4 +#define MISC_REG_AEU_ENABLE3_NIG_1 0xa194 +/* [RW 32] third 32b for enabling the output for close the gate pxp 0. + mapped as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] + PXP Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity + error; [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC + Hw interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE + Parity error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] + IGU (HC) Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; + [16] pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; + [20] MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; + [23] SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; + [26] SW timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers + attn_3 func1; [29] SW timers attn_4 func1; [30] General attn0; [31] + General attn1; */ +#define MISC_REG_AEU_ENABLE3_PXP_0 0xa104 +#define MISC_REG_AEU_ENABLE3_PXP_1 0xa1a4 +/* [RW 32] fourth 32b for enabling the output for function 0 output0.mapped + as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3] + General attn5; [4] General attn6; [5] General attn7; [6] General attn8; + [7] General attn9; [8] General attn10; [9] General attn11; [10] General + attn12; [11] General attn13; [12] General attn14; [13] General attn15; + [14] General attn16; [15] General attn17; [16] General attn18; [17] + General attn19; [18] General attn20; [19] General attn21; [20] Main power + interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN + Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC + Latched timeout attention; [27] GRC Latched reserved access attention; + [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP + Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ +#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0 0xa078 +#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_2 0xa098 +/* [RW 32] fourth 32b for enabling the output for function 1 output0.mapped + as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3] + General attn5; [4] General attn6; [5] General attn7; [6] General attn8; + [7] General attn9; [8] General attn10; [9] General attn11; [10] General + attn12; [11] General attn13; [12] General attn14; [13] General attn15; + [14] General attn16; [15] General attn17; [16] General attn18; [17] + General attn19; [18] General attn20; [19] General attn21; [20] Main power + interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN + Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC + Latched timeout attention; [27] GRC Latched reserved access attention; + [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP + Latched ump_tx_parity; [31] MCP Latched scpad_parity; */ +#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0 0xa118 +#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_2 0xa138 +/* [RW 32] fourth 32b for enabling the output for close the gate nig + 0.mapped as follows: [0] General attn2; [1] General attn3; [2] General + attn4; [3] General attn5; [4] General attn6; [5] General attn7; [6] + General attn8; [7] General attn9; [8] General attn10; [9] General attn11; + [10] General attn12; [11] General attn13; [12] General attn14; [13] + General attn15; [14] General attn16; [15] General attn17; [16] General + attn18; [17] General attn19; [18] General attn20; [19] General attn21; + [20] Main power interrupt; [21] RBCR Latched attn; [22] RBCT Latched + attn; [23] RBCN Latched attn; [24] RBCU Latched attn; [25] RBCP Latched + attn; [26] GRC Latched timeout attention; [27] GRC Latched reserved + access attention; [28] MCP Latched rom_parity; [29] MCP Latched + ump_rx_parity; [30] MCP Latched ump_tx_parity; [31] MCP Latched + scpad_parity; */ +#define MISC_REG_AEU_ENABLE4_NIG_0 0xa0f8 +#define MISC_REG_AEU_ENABLE4_NIG_1 0xa198 +/* [RW 32] fourth 32b for enabling the output for close the gate pxp + 0.mapped as follows: [0] General attn2; [1] General attn3; [2] General + attn4; [3] General attn5; [4] General attn6; [5] General attn7; [6] + General attn8; [7] General attn9; [8] General attn10; [9] General attn11; + [10] General attn12; [11] General attn13; [12] General attn14; [13] + General attn15; [14] General attn16; [15] General attn17; [16] General + attn18; [17] General attn19; [18] General attn20; [19] General attn21; + [20] Main power interrupt; [21] RBCR Latched attn; [22] RBCT Latched + attn; [23] RBCN Latched attn; [24] RBCU Latched attn; [25] RBCP Latched + attn; [26] GRC Latched timeout attention; [27] GRC Latched reserved + access attention; [28] MCP Latched rom_parity; [29] MCP Latched + ump_rx_parity; [30] MCP Latched ump_tx_parity; [31] MCP Latched + scpad_parity; */ +#define MISC_REG_AEU_ENABLE4_PXP_0 0xa108 +#define MISC_REG_AEU_ENABLE4_PXP_1 0xa1a8 +/* [RW 1] set/clr general attention 0; this will set/clr bit 94 in the aeu + 128 bit vector */ +#define MISC_REG_AEU_GENERAL_ATTN_0 0xa000 +#define MISC_REG_AEU_GENERAL_ATTN_1 0xa004 +#define MISC_REG_AEU_GENERAL_ATTN_10 0xa028 +#define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c +#define MISC_REG_AEU_GENERAL_ATTN_12 0xa030 +#define MISC_REG_AEU_GENERAL_ATTN_13 0xa034 +#define MISC_REG_AEU_GENERAL_ATTN_14 0xa038 +#define MISC_REG_AEU_GENERAL_ATTN_15 0xa03c +#define MISC_REG_AEU_GENERAL_ATTN_16 0xa040 +#define MISC_REG_AEU_GENERAL_ATTN_17 0xa044 +#define MISC_REG_AEU_GENERAL_ATTN_18 0xa048 +#define MISC_REG_AEU_GENERAL_ATTN_19 0xa04c +#define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c +#define MISC_REG_AEU_GENERAL_ATTN_2 0xa008 +#define MISC_REG_AEU_GENERAL_ATTN_20 0xa050 +#define MISC_REG_AEU_GENERAL_ATTN_21 0xa054 +#define MISC_REG_AEU_GENERAL_ATTN_3 0xa00c +#define MISC_REG_AEU_GENERAL_ATTN_4 0xa010 +#define MISC_REG_AEU_GENERAL_ATTN_5 0xa014 +#define MISC_REG_AEU_GENERAL_ATTN_6 0xa018 +/* [RW 32] first 32b for inverting the input for function 0; for each bit: + 0= do not invert; 1= invert; mapped as follows: [0] NIG attention for + function0; [1] NIG attention for function1; [2] GPIO1 mcp; [3] GPIO2 mcp; + [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1; [7] GPIO2 function 1; + [8] GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event + function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP + Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14] + SPIO4; [15] SPIO5; [16] MSI/X indication for mcp; [17] MSI/X indication + for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; [20] PRS + Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] SRC Hw + interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] TCM + Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] TSEMI + Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */ +#define MISC_REG_AEU_INVERTER_1_FUNC_0 0xa22c +#define MISC_REG_AEU_INVERTER_1_FUNC_1 0xa23c +/* [RW 32] second 32b for inverting the input for function 0; for each bit: + 0= do not invert; 1= invert. mapped as follows: [0] PBClient Parity + error; [1] PBClient Hw interrupt; [2] QM Parity error; [3] QM Hw + interrupt; [4] Timers Parity error; [5] Timers Hw interrupt; [6] XSDM + Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9] XCM Hw + interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12] + DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity + error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux + PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt; + [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error; + [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt; + [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error; + [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt; */ +#define MISC_REG_AEU_INVERTER_2_FUNC_0 0xa230 +#define MISC_REG_AEU_INVERTER_2_FUNC_1 0xa240 +/* [RW 10] [7:0] = mask 8 attention output signals toward IGU function0; + [9:8] = mask close the gates signals of function 0 toward PXP [8] and NIG + [9]. Zero = mask; one = unmask */ +#define MISC_REG_AEU_MASK_ATTN_FUNC_0 0xa060 +#define MISC_REG_AEU_MASK_ATTN_FUNC_1 0xa064 +/* [R 4] This field indicates the type of the device. '0' - 2 Ports; '1' - 1 + Port. */ +#define MISC_REG_BOND_ID 0xa400 +/* [R 8] These bits indicate the metal revision of the chip. This value + starts at 0x00 for each all-layer tape-out and increments by one for each + tape-out. */ +#define MISC_REG_CHIP_METAL 0xa404 +/* [R 16] These bits indicate the part number for the chip. */ +#define MISC_REG_CHIP_NUM 0xa408 +/* [R 4] These bits indicate the base revision of the chip. This value + starts at 0x0 for the A0 tape-out and increments by one for each + all-layer tape-out. */ +#define MISC_REG_CHIP_REV 0xa40c +/* [RW 1] Setting this bit enables a timer in the GRC block to timeout any + access that does not finish within + ~misc_registers_grc_timout_val.grc_timeout_val cycles. When this bit is + cleared; this timeout is disabled. If this timeout occurs; the GRC shall + assert it attention output. */ +#define MISC_REG_GRC_TIMEOUT_EN 0xa280 +/* [RW 28] 28 LSB of LCPLL first register; reset val = 521. inside order of + the bits is: [2:0] OAC reset value 001) CML output buffer bias control; + 111 for +40%; 011 for +20%; 001 for 0%; 000 for -20%. [5:3] Icp_ctrl + (reset value 001) Charge pump current control; 111 for 720u; 011 for + 600u; 001 for 480u and 000 for 360u. [7:6] Bias_ctrl (reset value 00) + Global bias control; When bit 7 is high bias current will be 10 0gh; When + bit 6 is high bias will be 100w; Valid values are 00; 10; 01. [10:8] + Pll_observe (reset value 010) Bits to control observability. bit 10 is + for test bias; bit 9 is for test CK; bit 8 is test Vc. [12:11] Vth_ctrl + (reset value 00) Comparator threshold control. 00 for 0.6V; 01 for 0.54V + and 10 for 0.66V. [13] pllSeqStart (reset value 0) Enables VCO tuning + sequencer: 1= sequencer disabled; 0= sequencer enabled (inverted + internally). [14] reserved (reset value 0) Reset for VCO sequencer is + connected to RESET input directly. [15] capRetry_en (reset value 0) + enable retry on cap search failure (inverted). [16] freqMonitor_e (reset + value 0) bit to continuously monitor vco freq (inverted). [17] + freqDetRestart_en (reset value 0) bit to enable restart when not freq + locked (inverted). [18] freqDetRetry_en (reset value 0) bit to enable + retry on freq det failure(inverted). [19] pllForceFdone_en (reset value + 0) bit to enable pllForceFdone & pllForceFpass into pllSeq. [20] + pllForceFdone (reset value 0) bit to force freqDone. [21] pllForceFpass + (reset value 0) bit to force freqPass. [22] pllForceDone_en (reset value + 0) bit to enable pllForceCapDone. [23] pllForceCapDone (reset value 0) + bit to force capDone. [24] pllForceCapPass_en (reset value 0) bit to + enable pllForceCapPass. [25] pllForceCapPass (reset value 0) bit to force + capPass. [26] capRestart (reset value 0) bit to force cap sequencer to + restart. [27] capSelectM_en (reset value 0) bit to enable cap select + register bits. */ +#define MISC_REG_LCPLL_CTRL_1 0xa2a4 +#define MISC_REG_LCPLL_CTRL_REG_2 0xa2a8 +/* [RW 4] Interrupt mask register #0 read/write */ +#define MISC_REG_MISC_INT_MASK 0xa388 +/* [RW 1] Parity mask register #0 read/write */ +#define MISC_REG_MISC_PRTY_MASK 0xa398 +/* [RW 32] 32 LSB of storm PLL first register; reset val = 0x 071d2911. + inside order of the bits is: [0] P1 divider[0] (reset value 1); [1] P1 + divider[1] (reset value 0); [2] P1 divider[2] (reset value 0); [3] P1 + divider[3] (reset value 0); [4] P2 divider[0] (reset value 1); [5] P2 + divider[1] (reset value 0); [6] P2 divider[2] (reset value 0); [7] P2 + divider[3] (reset value 0); [8] ph_det_dis (reset value 1); [9] + freq_det_dis (reset value 0); [10] Icpx[0] (reset value 0); [11] Icpx[1] + (reset value 1); [12] Icpx[2] (reset value 0); [13] Icpx[3] (reset value + 1); [14] Icpx[4] (reset value 0); [15] Icpx[5] (reset value 0); [16] + Rx[0] (reset value 1); [17] Rx[1] (reset value 0); [18] vc_en (reset + value 1); [19] vco_rng[0] (reset value 1); [20] vco_rng[1] (reset value + 1); [21] Kvco_xf[0] (reset value 0); [22] Kvco_xf[1] (reset value 0); + [23] Kvco_xf[2] (reset value 0); [24] Kvco_xs[0] (reset value 1); [25] + Kvco_xs[1] (reset value 1); [26] Kvco_xs[2] (reset value 1); [27] + testd_en (reset value 0); [28] testd_sel[0] (reset value 0); [29] + testd_sel[1] (reset value 0); [30] testd_sel[2] (reset value 0); [31] + testa_en (reset value 0); */ +#define MISC_REG_PLL_STORM_CTRL_1 0xa294 +#define MISC_REG_PLL_STORM_CTRL_2 0xa298 +#define MISC_REG_PLL_STORM_CTRL_3 0xa29c +#define MISC_REG_PLL_STORM_CTRL_4 0xa2a0 +/* [RW 32] reset reg#1; rite/read one = the specific block is out of reset; + write/read zero = the specific block is in reset; addr 0-wr- the write + value will be written to the register; addr 1-set - one will be written + to all the bits that have the value of one in the data written (bits that + have the value of zero will not be change) ; addr 2-clear - zero will be + written to all the bits that have the value of one in the data written + (bits that have the value of zero will not be change); addr 3-ignore; + read ignore from all addr except addr 00; inside order of the bits is: + [0] rst_brb1; [1] rst_prs; [2] rst_src; [3] rst_tsdm; [4] rst_tsem; [5] + rst_tcm; [6] rst_rbcr; [7] rst_nig; [8] rst_usdm; [9] rst_ucm; [10] + rst_usem; [11] rst_upb; [12] rst_ccm; [13] rst_csem; [14] rst_csdm; [15] + rst_rbcu; [16] rst_pbf; [17] rst_qm; [18] rst_tm; [19] rst_dorq; [20] + rst_xcm; [21] rst_xsdm; [22] rst_xsem; [23] rst_rbct; [24] rst_cdu; [25] + rst_cfc; [26] rst_pxp; [27] rst_pxpv; [28] rst_rbcp; [29] rst_hc; [30] + rst_dmae; [31] rst_semi_rtc; */ +#define MISC_REG_RESET_REG_1 0xa580 +#define MISC_REG_RESET_REG_2 0xa590 +/* [RW 20] 20 bit GRC address where the scratch-pad of the MCP that is + shared with the driver resides */ +#define MISC_REG_SHARED_MEM_ADDR 0xa2b4 +#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT (0x1<<0) +#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS (0x1<<9) +#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G (0x1<<15) +#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK_STATUS (0xf<<18) +/* [RW 1] Input enable for RX_BMAC0 IF */ +#define NIG_REG_BMAC0_IN_EN 0x100ac +/* [RW 1] output enable for TX_BMAC0 IF */ +#define NIG_REG_BMAC0_OUT_EN 0x100e0 +/* [RW 1] output enable for TX BMAC pause port 0 IF */ +#define NIG_REG_BMAC0_PAUSE_OUT_EN 0x10110 +/* [RW 1] output enable for RX_BMAC0_REGS IF */ +#define NIG_REG_BMAC0_REGS_OUT_EN 0x100e8 +/* [RW 1] output enable for RX BRB1 port0 IF */ +#define NIG_REG_BRB0_OUT_EN 0x100f8 +/* [RW 1] Input enable for TX BRB1 pause port 0 IF */ +#define NIG_REG_BRB0_PAUSE_IN_EN 0x100c4 +/* [RW 1] output enable for RX BRB1 port1 IF */ +#define NIG_REG_BRB1_OUT_EN 0x100fc +/* [RW 1] Input enable for TX BRB1 pause port 1 IF */ +#define NIG_REG_BRB1_PAUSE_IN_EN 0x100c8 +/* [RW 1] output enable for RX BRB1 LP IF */ +#define NIG_REG_BRB_LB_OUT_EN 0x10100 +/* [WB_W 72] Debug packet to LP from RBC; Data spelling:[63:0] data; 64] + error; [67:65]eop_bvalid; [68]eop; [69]sop; [70]port_id; 71]flush */ +#define NIG_REG_DEBUG_PACKET_LB 0x10800 +/* [RW 1] Input enable for TX Debug packet */ +#define NIG_REG_EGRESS_DEBUG_IN_EN 0x100dc +/* [RW 1] If 1 - egress drain mode for port0 is active. In this mode all + packets from PBFare not forwarded to the MAC and just deleted from FIFO. + First packet may be deleted from the middle. And last packet will be + always deleted till the end. */ +#define NIG_REG_EGRESS_DRAIN0_MODE 0x10060 +/* [RW 1] Output enable to EMAC0 */ +#define NIG_REG_EGRESS_EMAC0_OUT_EN 0x10120 +/* [RW 1] MAC configuration for packets of port0. If 1 - all packet outputs + to emac for port0; other way to bmac for port0 */ +#define NIG_REG_EGRESS_EMAC0_PORT 0x10058 +/* [RW 1] Input enable for TX PBF user packet port0 IF */ +#define NIG_REG_EGRESS_PBF0_IN_EN 0x100cc +/* [RW 1] Input enable for TX PBF user packet port1 IF */ +#define NIG_REG_EGRESS_PBF1_IN_EN 0x100d0 +/* [RW 1] Input enable for RX_EMAC0 IF */ +#define NIG_REG_EMAC0_IN_EN 0x100a4 +/* [RW 1] output enable for TX EMAC pause port 0 IF */ +#define NIG_REG_EMAC0_PAUSE_OUT_EN 0x10118 +/* [R 1] status from emac0. This bit is set when MDINT from either the + EXT_MDINT pin or from the Copper PHY is driven low. This condition must + be cleared in the attached PHY device that is driving the MINT pin. */ +#define NIG_REG_EMAC0_STATUS_MISC_MI_INT 0x10494 +/* [WB 48] This address space contains BMAC0 registers. The BMAC registers + are described in appendix A. In order to access the BMAC0 registers; the + base address; NIG_REGISTERS_INGRESS_BMAC0_MEM; Offset: 0x10c00; should be + added to each BMAC register offset */ +#define NIG_REG_INGRESS_BMAC0_MEM 0x10c00 +/* [WB 48] This address space contains BMAC1 registers. The BMAC registers + are described in appendix A. In order to access the BMAC0 registers; the + base address; NIG_REGISTERS_INGRESS_BMAC1_MEM; Offset: 0x11000; should be + added to each BMAC register offset */ +#define NIG_REG_INGRESS_BMAC1_MEM 0x11000 +/* [R 1] FIFO empty in EOP descriptor FIFO of LP in NIG_RX_EOP */ +#define NIG_REG_INGRESS_EOP_LB_EMPTY 0x104e0 +/* [RW 17] Debug only. RX_EOP_DSCR_lb_FIFO in NIG_RX_EOP. Data + packet_length[13:0]; mac_error[14]; trunc_error[15]; parity[16] */ +#define NIG_REG_INGRESS_EOP_LB_FIFO 0x104e4 +/* [RW 1] led 10g for port 0 */ +#define NIG_REG_LED_10G_P0 0x10320 +/* [RW 1] Port0: This bit is set to enable the use of the + ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 field + defined below. If this bit is cleared; then the blink rate will be about + 8Hz. */ +#define NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 0x10318 +/* [RW 12] Port0: Specifies the period of each blink cycle (on + off) for + Traffic LED in milliseconds. Must be a non-zero value. This 12-bit field + is reset to 0x080; giving a default blink period of approximately 8Hz. */ +#define NIG_REG_LED_CONTROL_BLINK_RATE_P0 0x10310 +/* [RW 1] Port0: If set along with the + nig_registers_led_control_override_traffic_p0.led_control_override_traffic_p0 + bit and ~nig_registers_led_control_traffic_p0.led_control_traffic_p0 LED + bit; the Traffic LED will blink with the blink rate specified in + ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and + ~nig_registers_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0 + fields. */ +#define NIG_REG_LED_CONTROL_BLINK_TRAFFIC_P0 0x10308 +/* [RW 1] Port0: If set overrides hardware control of the Traffic LED. The + Traffic LED will then be controlled via bit ~nig_registers_ + led_control_traffic_p0.led_control_traffic_p0 and bit + ~nig_registers_led_control_blink_traffic_p0.led_control_blink_traffic_p0 */ +#define NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 0x102f8 +/* [RW 1] Port0: If set along with the led_control_override_trafic_p0 bit; + turns on the Traffic LED. If the led_control_blink_traffic_p0 bit is also + set; the LED will blink with blink rate specified in + ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and + ~nig_regsters_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0 + fields. */ +#define NIG_REG_LED_CONTROL_TRAFFIC_P0 0x10300 +/* [RW 4] led mode for port0: 0 MAC; 1-3 PHY1; 4 MAC2; 5-7 PHY4; 8-MAC3; + 9-11PHY7; 12 MAC4; 13-15 PHY10; */ +#define NIG_REG_LED_MODE_P0 0x102f0 +#define NIG_REG_LLH0_BRB1_DRV_MASK 0x10244 +/* [RW 1] send to BRB1 if no match on any of RMP rules. */ +#define NIG_REG_LLH0_BRB1_NOT_MCP 0x1025c +/* [RW 32] cm header for llh0 */ +#define NIG_REG_LLH0_CM_HEADER 0x1007c +#define NIG_REG_LLH0_ERROR_MASK 0x1008c +/* [RW 8] event id for llh0 */ +#define NIG_REG_LLH0_EVENT_ID 0x10084 +/* [RW 8] init credit counter for port0 in LLH */ +#define NIG_REG_LLH0_XCM_INIT_CREDIT 0x10554 +#define NIG_REG_LLH0_XCM_MASK 0x10130 +/* [RW 1] send to BRB1 if no match on any of RMP rules. */ +#define NIG_REG_LLH1_BRB1_NOT_MCP 0x102dc +/* [RW 32] cm header for llh1 */ +#define NIG_REG_LLH1_CM_HEADER 0x10080 +#define NIG_REG_LLH1_ERROR_MASK 0x10090 +/* [RW 8] event id for llh1 */ +#define NIG_REG_LLH1_EVENT_ID 0x10088 +/* [RW 8] init credit counter for port1 in LLH */ +#define NIG_REG_LLH1_XCM_INIT_CREDIT 0x10564 +#define NIG_REG_LLH1_XCM_MASK 0x10134 +#define NIG_REG_MASK_INTERRUPT_PORT0 0x10330 +#define NIG_REG_MASK_INTERRUPT_PORT1 0x10334 +/* [RW 1] Output signal from NIG to EMAC0. When set enables the EMAC0 block. */ +#define NIG_REG_NIG_EMAC0_EN 0x1003c +/* [RW 1] Output signal from NIG to TX_EMAC0. When set indicates to the + EMAC0 to strip the CRC from the ingress packets. */ +#define NIG_REG_NIG_INGRESS_EMAC0_NO_CRC 0x10044 +/* [RW 1] Input enable for RX PBF LP IF */ +#define NIG_REG_PBF_LB_IN_EN 0x100b4 +/* [RW 1] output enable for RX parser descriptor IF */ +#define NIG_REG_PRS_EOP_OUT_EN 0x10104 +/* [RW 1] Input enable for RX parser request IF */ +#define NIG_REG_PRS_REQ_IN_EN 0x100b8 +/* [RW 5] control to serdes - CL22 PHY_ADD and CL45 PRTAD */ +#define NIG_REG_SERDES0_CTRL_PHY_ADDR 0x10374 +/* [R 1] status from serdes0 that inputs to interrupt logic of link status */ +#define NIG_REG_SERDES0_STATUS_LINK_STATUS 0x10578 +/* [R 32] Rx statistics : In user packets discarded due to BRB backpressure + for port0 */ +#define NIG_REG_STAT0_BRB_DISCARD 0x105f0 +/* [R 32] Rx statistics : In user packets discarded due to BRB backpressure + for port1 */ +#define NIG_REG_STAT1_BRB_DISCARD 0x10628 +/* [WB_R 64] Rx statistics : User octets received for LP */ +#define NIG_REG_STAT2_BRB_OCTET 0x107e0 +#define NIG_REG_STATUS_INTERRUPT_PORT0 0x10328 +#define NIG_REG_STATUS_INTERRUPT_PORT1 0x1032c +/* [RW 1] output enable for RX_XCM0 IF */ +#define NIG_REG_XCM0_OUT_EN 0x100f0 +/* [RW 1] output enable for RX_XCM1 IF */ +#define NIG_REG_XCM1_OUT_EN 0x100f4 +/* [RW 5] control to xgxs - CL45 DEVAD */ +#define NIG_REG_XGXS0_CTRL_MD_DEVAD 0x1033c +/* [RW 5] control to xgxs - CL22 PHY_ADD and CL45 PRTAD */ +#define NIG_REG_XGXS0_CTRL_PHY_ADDR 0x10340 +/* [R 1] status from xgxs0 that inputs to interrupt logic of link10g. */ +#define NIG_REG_XGXS0_STATUS_LINK10G 0x10680 +/* [R 4] status from xgxs0 that inputs to interrupt logic of link status */ +#define NIG_REG_XGXS0_STATUS_LINK_STATUS 0x10684 +/* [RW 2] selection for XGXS lane of port 0 in NIG_MUX block */ +#define NIG_REG_XGXS_LANE_SEL_P0 0x102e8 +/* [RW 1] selection for port0 for NIG_MUX block : 0 = SerDes; 1 = XGXS */ +#define NIG_REG_XGXS_SERDES0_MODE_SEL 0x102e0 +#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS (0x1<<9) +#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G (0x1<<15) +#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS (0xf<<18) +#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE 18 +/* [RW 1] Disable processing further tasks from port 0 (after ending the + current task in process). */ +#define PBF_REG_DISABLE_NEW_TASK_PROC_P0 0x14005c +/* [RW 1] Disable processing further tasks from port 1 (after ending the + current task in process). */ +#define PBF_REG_DISABLE_NEW_TASK_PROC_P1 0x140060 +/* [RW 1] Disable processing further tasks from port 4 (after ending the + current task in process). */ +#define PBF_REG_DISABLE_NEW_TASK_PROC_P4 0x14006c +#define PBF_REG_IF_ENABLE_REG 0x140044 +/* [RW 1] Init bit. When set the initial credits are copied to the credit + registers (except the port credits). Should be set and then reset after + the configuration of the block has ended. */ +#define PBF_REG_INIT 0x140000 +/* [RW 1] Init bit for port 0. When set the initial credit of port 0 is + copied to the credit register. Should be set and then reset after the + configuration of the port has ended. */ +#define PBF_REG_INIT_P0 0x140004 +/* [RW 1] Init bit for port 1. When set the initial credit of port 1 is + copied to the credit register. Should be set and then reset after the + configuration of the port has ended. */ +#define PBF_REG_INIT_P1 0x140008 +/* [RW 1] Init bit for port 4. When set the initial credit of port 4 is + copied to the credit register. Should be set and then reset after the + configuration of the port has ended. */ +#define PBF_REG_INIT_P4 0x14000c +/* [RW 1] Enable for mac interface 0. */ +#define PBF_REG_MAC_IF0_ENABLE 0x140030 +/* [RW 1] Enable for mac interface 1. */ +#define PBF_REG_MAC_IF1_ENABLE 0x140034 +/* [RW 1] Enable for the loopback interface. */ +#define PBF_REG_MAC_LB_ENABLE 0x140040 +/* [RW 10] Port 0 threshold used by arbiter in 16 byte lines used when pause + not suppoterd. */ +#define PBF_REG_P0_ARB_THRSH 0x1400e4 +/* [R 11] Current credit for port 0 in the tx port buffers in 16 byte lines. */ +#define PBF_REG_P0_CREDIT 0x140200 +/* [RW 11] Initial credit for port 0 in the tx port buffers in 16 byte + lines. */ +#define PBF_REG_P0_INIT_CRD 0x1400d0 +/* [RW 1] Indication that pause is enabled for port 0. */ +#define PBF_REG_P0_PAUSE_ENABLE 0x140014 +/* [R 8] Number of tasks in port 0 task queue. */ +#define PBF_REG_P0_TASK_CNT 0x140204 +/* [R 11] Current credit for port 1 in the tx port buffers in 16 byte lines. */ +#define PBF_REG_P1_CREDIT 0x140208 +/* [RW 11] Initial credit for port 1 in the tx port buffers in 16 byte + lines. */ +#define PBF_REG_P1_INIT_CRD 0x1400d4 +/* [R 8] Number of tasks in port 1 task queue. */ +#define PBF_REG_P1_TASK_CNT 0x14020c +/* [R 11] Current credit for port 4 in the tx port buffers in 16 byte lines. */ +#define PBF_REG_P4_CREDIT 0x140210 +/* [RW 11] Initial credit for port 4 in the tx port buffers in 16 byte + lines. */ +#define PBF_REG_P4_INIT_CRD 0x1400e0 +/* [R 8] Number of tasks in port 4 task queue. */ +#define PBF_REG_P4_TASK_CNT 0x140214 +/* [RW 5] Interrupt mask register #0 read/write */ +#define PBF_REG_PBF_INT_MASK 0x1401d4 +/* [R 5] Interrupt register #0 read */ +#define PBF_REG_PBF_INT_STS 0x1401c8 +#define PB_REG_CONTROL 0 +/* [RW 2] Interrupt mask register #0 read/write */ +#define PB_REG_PB_INT_MASK 0x28 +/* [R 2] Interrupt register #0 read */ +#define PB_REG_PB_INT_STS 0x1c +/* [RW 4] Parity mask register #0 read/write */ +#define PB_REG_PB_PRTY_MASK 0x38 +#define PRS_REG_A_PRSU_20 0x40134 +/* [R 8] debug only: CFC load request current credit. Transaction based. */ +#define PRS_REG_CFC_LD_CURRENT_CREDIT 0x40164 +/* [R 8] debug only: CFC search request current credit. Transaction based. */ +#define PRS_REG_CFC_SEARCH_CURRENT_CREDIT 0x40168 +/* [RW 6] The initial credit for the search message to the CFC interface. + Credit is transaction based. */ +#define PRS_REG_CFC_SEARCH_INITIAL_CREDIT 0x4011c +/* [RW 24] CID for port 0 if no match */ +#define PRS_REG_CID_PORT_0 0x400fc +#define PRS_REG_CID_PORT_1 0x40100 +/* [RW 32] The CM header for flush message where 'load existed' bit in CFC + load response is reset and packet type is 0. Used in packet start message + to TCM. */ +#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_0 0x400dc +#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_1 0x400e0 +#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_2 0x400e4 +#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_3 0x400e8 +#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_4 0x400ec +/* [RW 32] The CM header for flush message where 'load existed' bit in CFC + load response is set and packet type is 0. Used in packet start message + to TCM. */ +#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_0 0x400bc +#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_1 0x400c0 +#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_2 0x400c4 +#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_3 0x400c8 +#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_4 0x400cc +/* [RW 32] The CM header for a match and packet type 1 for loopback port. + Used in packet start message to TCM. */ +#define PRS_REG_CM_HDR_LOOPBACK_TYPE_1 0x4009c +#define PRS_REG_CM_HDR_LOOPBACK_TYPE_2 0x400a0 +#define PRS_REG_CM_HDR_LOOPBACK_TYPE_3 0x400a4 +#define PRS_REG_CM_HDR_LOOPBACK_TYPE_4 0x400a8 +/* [RW 32] The CM header for a match and packet type 0. Used in packet start + message to TCM. */ +#define PRS_REG_CM_HDR_TYPE_0 0x40078 +#define PRS_REG_CM_HDR_TYPE_1 0x4007c +#define PRS_REG_CM_HDR_TYPE_2 0x40080 +#define PRS_REG_CM_HDR_TYPE_3 0x40084 +#define PRS_REG_CM_HDR_TYPE_4 0x40088 +/* [RW 32] The CM header in case there was not a match on the connection */ +#define PRS_REG_CM_NO_MATCH_HDR 0x400b8 +/* [RW 8] The 8-bit event ID for a match and packet type 1. Used in packet + start message to TCM. */ +#define PRS_REG_EVENT_ID_1 0x40054 +#define PRS_REG_EVENT_ID_2 0x40058 +#define PRS_REG_EVENT_ID_3 0x4005c +/* [RW 8] Context region for flush packet with packet type 0. Used in CFC + load request message. */ +#define PRS_REG_FLUSH_REGIONS_TYPE_0 0x40004 +#define PRS_REG_FLUSH_REGIONS_TYPE_1 0x40008 +#define PRS_REG_FLUSH_REGIONS_TYPE_2 0x4000c +#define PRS_REG_FLUSH_REGIONS_TYPE_3 0x40010 +#define PRS_REG_FLUSH_REGIONS_TYPE_4 0x40014 +#define PRS_REG_FLUSH_REGIONS_TYPE_5 0x40018 +#define PRS_REG_FLUSH_REGIONS_TYPE_6 0x4001c +#define PRS_REG_FLUSH_REGIONS_TYPE_7 0x40020 +/* [RW 4] The increment value to send in the CFC load request message */ +#define PRS_REG_INC_VALUE 0x40048 +/* [RW 1] If set indicates not to send messages to CFC on received packets */ +#define PRS_REG_NIC_MODE 0x40138 +/* [RW 8] The 8-bit event ID for cases where there is no match on the + connection. Used in packet start message to TCM. */ +#define PRS_REG_NO_MATCH_EVENT_ID 0x40070 +/* [ST 24] The number of input CFC flush packets */ +#define PRS_REG_NUM_OF_CFC_FLUSH_MESSAGES 0x40128 +/* [ST 32] The number of cycles the Parser halted its operation since it + could not allocate the next serial number */ +#define PRS_REG_NUM_OF_DEAD_CYCLES 0x40130 +/* [ST 24] The number of input packets */ +#define PRS_REG_NUM_OF_PACKETS 0x40124 +/* [ST 24] The number of input transparent flush packets */ +#define PRS_REG_NUM_OF_TRANSPARENT_FLUSH_MESSAGES 0x4012c +/* [RW 8] Context region for received Ethernet packet with a match and + packet type 0. Used in CFC load request message */ +#define PRS_REG_PACKET_REGIONS_TYPE_0 0x40028 +#define PRS_REG_PACKET_REGIONS_TYPE_1 0x4002c +#define PRS_REG_PACKET_REGIONS_TYPE_2 0x40030 +#define PRS_REG_PACKET_REGIONS_TYPE_3 0x40034 +#define PRS_REG_PACKET_REGIONS_TYPE_4 0x40038 +#define PRS_REG_PACKET_REGIONS_TYPE_5 0x4003c +#define PRS_REG_PACKET_REGIONS_TYPE_6 0x40040 +#define PRS_REG_PACKET_REGIONS_TYPE_7 0x40044 +/* [R 2] debug only: Number of pending requests for CAC on port 0. */ +#define PRS_REG_PENDING_BRB_CAC0_RQ 0x40174 +/* [R 2] debug only: Number of pending requests for header parsing. */ +#define PRS_REG_PENDING_BRB_PRS_RQ 0x40170 +/* [R 1] Interrupt register #0 read */ +#define PRS_REG_PRS_INT_STS 0x40188 +/* [RW 8] Parity mask register #0 read/write */ +#define PRS_REG_PRS_PRTY_MASK 0x401a4 +/* [RW 8] Context region for pure acknowledge packets. Used in CFC load + request message */ +#define PRS_REG_PURE_REGIONS 0x40024 +/* [R 32] debug only: Serial number status lsb 32 bits. '1' indicates this + serail number was released by SDM but cannot be used because a previous + serial number was not released. */ +#define PRS_REG_SERIAL_NUM_STATUS_LSB 0x40154 +/* [R 32] debug only: Serial number status msb 32 bits. '1' indicates this + serail number was released by SDM but cannot be used because a previous + serial number was not released. */ +#define PRS_REG_SERIAL_NUM_STATUS_MSB 0x40158 +/* [R 4] debug only: SRC current credit. Transaction based. */ +#define PRS_REG_SRC_CURRENT_CREDIT 0x4016c +/* [R 8] debug only: TCM current credit. Cycle based. */ +#define PRS_REG_TCM_CURRENT_CREDIT 0x40160 +/* [R 8] debug only: TSDM current credit. Transaction based. */ +#define PRS_REG_TSDM_CURRENT_CREDIT 0x4015c +/* [R 6] Debug only: Number of used entries in the data FIFO */ +#define PXP2_REG_HST_DATA_FIFO_STATUS 0x12047c +/* [R 7] Debug only: Number of used entries in the header FIFO */ +#define PXP2_REG_HST_HEADER_FIFO_STATUS 0x120478 +#define PXP2_REG_PGL_CONTROL0 0x120490 +#define PXP2_REG_PGL_CONTROL1 0x120514 +/* [RW 32] Inbound interrupt table for CSDM: bits[31:16]-mask; + its[15:0]-address */ +#define PXP2_REG_PGL_INT_CSDM_0 0x1204f4 +#define PXP2_REG_PGL_INT_CSDM_1 0x1204f8 +#define PXP2_REG_PGL_INT_CSDM_2 0x1204fc +#define PXP2_REG_PGL_INT_CSDM_3 0x120500 +#define PXP2_REG_PGL_INT_CSDM_4 0x120504 +#define PXP2_REG_PGL_INT_CSDM_5 0x120508 +#define PXP2_REG_PGL_INT_CSDM_6 0x12050c +#define PXP2_REG_PGL_INT_CSDM_7 0x120510 +/* [RW 32] Inbound interrupt table for TSDM: bits[31:16]-mask; + its[15:0]-address */ +#define PXP2_REG_PGL_INT_TSDM_0 0x120494 +#define PXP2_REG_PGL_INT_TSDM_1 0x120498 +#define PXP2_REG_PGL_INT_TSDM_2 0x12049c +#define PXP2_REG_PGL_INT_TSDM_3 0x1204a0 +#define PXP2_REG_PGL_INT_TSDM_4 0x1204a4 +#define PXP2_REG_PGL_INT_TSDM_5 0x1204a8 +#define PXP2_REG_PGL_INT_TSDM_6 0x1204ac +#define PXP2_REG_PGL_INT_TSDM_7 0x1204b0 +/* [RW 32] Inbound interrupt table for USDM: bits[31:16]-mask; + its[15:0]-address */ +#define PXP2_REG_PGL_INT_USDM_0 0x1204b4 +#define PXP2_REG_PGL_INT_USDM_1 0x1204b8 +#define PXP2_REG_PGL_INT_USDM_2 0x1204bc +#define PXP2_REG_PGL_INT_USDM_3 0x1204c0 +#define PXP2_REG_PGL_INT_USDM_4 0x1204c4 +#define PXP2_REG_PGL_INT_USDM_5 0x1204c8 +#define PXP2_REG_PGL_INT_USDM_6 0x1204cc +#define PXP2_REG_PGL_INT_USDM_7 0x1204d0 +/* [RW 32] Inbound interrupt table for XSDM: bits[31:16]-mask; + its[15:0]-address */ +#define PXP2_REG_PGL_INT_XSDM_0 0x1204d4 +#define PXP2_REG_PGL_INT_XSDM_1 0x1204d8 +#define PXP2_REG_PGL_INT_XSDM_2 0x1204dc +#define PXP2_REG_PGL_INT_XSDM_3 0x1204e0 +#define PXP2_REG_PGL_INT_XSDM_4 0x1204e4 +#define PXP2_REG_PGL_INT_XSDM_5 0x1204e8 +#define PXP2_REG_PGL_INT_XSDM_6 0x1204ec +#define PXP2_REG_PGL_INT_XSDM_7 0x1204f0 +/* [R 1] this bit indicates that a read request was blocked because of + bus_master_en was deasserted */ +#define PXP2_REG_PGL_READ_BLOCKED 0x120568 +/* [R 6] debug only */ +#define PXP2_REG_PGL_TXR_CDTS 0x120528 +/* [R 18] debug only */ +#define PXP2_REG_PGL_TXW_CDTS 0x12052c +/* [R 1] this bit indicates that a write request was blocked because of + bus_master_en was deasserted */ +#define PXP2_REG_PGL_WRITE_BLOCKED 0x120564 +#define PXP2_REG_PSWRQ_BW_ADD1 0x1201c0 +#define PXP2_REG_PSWRQ_BW_ADD10 0x1201e4 +#define PXP2_REG_PSWRQ_BW_ADD11 0x1201e8 +#define PXP2_REG_PSWRQ_BW_ADD10 0x1201e4 +#define PXP2_REG_PSWRQ_BW_ADD11 0x1201e8 +#define PXP2_REG_PSWRQ_BW_ADD2 0x1201c4 +#define PXP2_REG_PSWRQ_BW_ADD28 0x120228 +#define PXP2_REG_PSWRQ_BW_ADD28 0x120228 +#define PXP2_REG_PSWRQ_BW_ADD3 0x1201c8 +#define PXP2_REG_PSWRQ_BW_ADD6 0x1201d4 +#define PXP2_REG_PSWRQ_BW_ADD7 0x1201d8 +#define PXP2_REG_PSWRQ_BW_ADD8 0x1201dc +#define PXP2_REG_PSWRQ_BW_ADD9 0x1201e0 +#define PXP2_REG_PSWRQ_BW_CREDIT 0x12032c +#define PXP2_REG_PSWRQ_BW_L1 0x1202b0 +#define PXP2_REG_PSWRQ_BW_L10 0x1202d4 +#define PXP2_REG_PSWRQ_BW_L11 0x1202d8 +#define PXP2_REG_PSWRQ_BW_L10 0x1202d4 +#define PXP2_REG_PSWRQ_BW_L11 0x1202d8 +#define PXP2_REG_PSWRQ_BW_L2 0x1202b4 +#define PXP2_REG_PSWRQ_BW_L28 0x120318 +#define PXP2_REG_PSWRQ_BW_L28 0x120318 +#define PXP2_REG_PSWRQ_BW_L3 0x1202b8 +#define PXP2_REG_PSWRQ_BW_L6 0x1202c4 +#define PXP2_REG_PSWRQ_BW_L7 0x1202c8 +#define PXP2_REG_PSWRQ_BW_L8 0x1202cc +#define PXP2_REG_PSWRQ_BW_L9 0x1202d0 +#define PXP2_REG_PSWRQ_BW_RD 0x120324 +#define PXP2_REG_PSWRQ_BW_UB1 0x120238 +#define PXP2_REG_PSWRQ_BW_UB10 0x12025c +#define PXP2_REG_PSWRQ_BW_UB11 0x120260 +#define PXP2_REG_PSWRQ_BW_UB10 0x12025c +#define PXP2_REG_PSWRQ_BW_UB11 0x120260 +#define PXP2_REG_PSWRQ_BW_UB2 0x12023c +#define PXP2_REG_PSWRQ_BW_UB28 0x1202a0 +#define PXP2_REG_PSWRQ_BW_UB28 0x1202a0 +#define PXP2_REG_PSWRQ_BW_UB3 0x120240 +#define PXP2_REG_PSWRQ_BW_UB6 0x12024c +#define PXP2_REG_PSWRQ_BW_UB7 0x120250 +#define PXP2_REG_PSWRQ_BW_UB8 0x120254 +#define PXP2_REG_PSWRQ_BW_UB9 0x120258 +#define PXP2_REG_PSWRQ_BW_WR 0x120328 +#define PXP2_REG_PSWRQ_CDU0_L2P 0x120000 +#define PXP2_REG_PSWRQ_QM0_L2P 0x120038 +#define PXP2_REG_PSWRQ_SRC0_L2P 0x120054 +#define PXP2_REG_PSWRQ_TM0_L2P 0x12001c +/* [RW 25] Interrupt mask register #0 read/write */ +#define PXP2_REG_PXP2_INT_MASK 0x120578 +/* [R 25] Interrupt register #0 read */ +#define PXP2_REG_PXP2_INT_STS 0x12056c +/* [RC 25] Interrupt register #0 read clear */ +#define PXP2_REG_PXP2_INT_STS_CLR 0x120570 +/* [RW 32] Parity mask register #0 read/write */ +#define PXP2_REG_PXP2_PRTY_MASK_0 0x120588 +#define PXP2_REG_PXP2_PRTY_MASK_1 0x120598 +/* [R 1] Debug only: The 'almost full' indication from each fifo (gives + indication about backpressure) */ +#define PXP2_REG_RD_ALMOST_FULL_0 0x120424 +/* [R 8] Debug only: The blocks counter - number of unused block ids */ +#define PXP2_REG_RD_BLK_CNT 0x120418 +/* [RW 8] Debug only: Total number of available blocks in Tetris Buffer. + Must be bigger than 6. Normally should not be changed. */ +#define PXP2_REG_RD_BLK_NUM_CFG 0x12040c +/* [RW 2] CDU byte swapping mode configuration for master read requests */ +#define PXP2_REG_RD_CDURD_SWAP_MODE 0x120404 +/* [RW 1] When '1'; inputs to the PSWRD block are ignored */ +#define PXP2_REG_RD_DISABLE_INPUTS 0x120374 +/* [R 1] PSWRD internal memories initialization is done */ +#define PXP2_REG_RD_INIT_DONE 0x120370 +/* [RW 8] The maximum number of blocks in Tetris Buffer that can be + allocated for vq10 */ +#define PXP2_REG_RD_MAX_BLKS_VQ10 0x1203a0 +/* [RW 8] The maximum number of blocks in Tetris Buffer that can be + allocated for vq11 */ +#define PXP2_REG_RD_MAX_BLKS_VQ11 0x1203a4 +/* [RW 8] The maximum number of blocks in Tetris Buffer that can be + allocated for vq17 */ +#define PXP2_REG_RD_MAX_BLKS_VQ17 0x1203bc +/* [RW 8] The maximum number of blocks in Tetris Buffer that can be + allocated for vq18 */ +#define PXP2_REG_RD_MAX_BLKS_VQ18 0x1203c0 +/* [RW 8] The maximum number of blocks in Tetris Buffer that can be + allocated for vq19 */ +#define PXP2_REG_RD_MAX_BLKS_VQ19 0x1203c4 +/* [RW 8] The maximum number of blocks in Tetris Buffer that can be + allocated for vq22 */ +#define PXP2_REG_RD_MAX_BLKS_VQ22 0x1203d0 +/* [RW 8] The maximum number of blocks in Tetris Buffer that can be + allocated for vq6 */ +#define PXP2_REG_RD_MAX_BLKS_VQ6 0x120390 +/* [RW 8] The maximum number of blocks in Tetris Buffer that can be + allocated for vq9 */ +#define PXP2_REG_RD_MAX_BLKS_VQ9 0x12039c +/* [RW 2] PBF byte swapping mode configuration for master read requests */ +#define PXP2_REG_RD_PBF_SWAP_MODE 0x1203f4 +/* [R 1] Debug only: Indication if delivery ports are idle */ +#define PXP2_REG_RD_PORT_IS_IDLE_0 0x12041c +#define PXP2_REG_RD_PORT_IS_IDLE_1 0x120420 +/* [RW 2] QM byte swapping mode configuration for master read requests */ +#define PXP2_REG_RD_QM_SWAP_MODE 0x1203f8 +/* [R 7] Debug only: The SR counter - number of unused sub request ids */ +#define PXP2_REG_RD_SR_CNT 0x120414 +/* [RW 2] SRC byte swapping mode configuration for master read requests */ +#define PXP2_REG_RD_SRC_SWAP_MODE 0x120400 +/* [RW 7] Debug only: Total number of available PCI read sub-requests. Must + be bigger than 1. Normally should not be changed. */ +#define PXP2_REG_RD_SR_NUM_CFG 0x120408 +/* [RW 1] Signals the PSWRD block to start initializing internal memories */ +#define PXP2_REG_RD_START_INIT 0x12036c +/* [RW 2] TM byte swapping mode configuration for master read requests */ +#define PXP2_REG_RD_TM_SWAP_MODE 0x1203fc +/* [RW 10] Bandwidth addition to VQ0 write requests */ +#define PXP2_REG_RQ_BW_RD_ADD0 0x1201bc +/* [RW 10] Bandwidth addition to VQ12 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD12 0x1201ec +/* [RW 10] Bandwidth addition to VQ13 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD13 0x1201f0 +/* [RW 10] Bandwidth addition to VQ14 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD14 0x1201f4 +/* [RW 10] Bandwidth addition to VQ15 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD15 0x1201f8 +/* [RW 10] Bandwidth addition to VQ16 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD16 0x1201fc +/* [RW 10] Bandwidth addition to VQ17 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD17 0x120200 +/* [RW 10] Bandwidth addition to VQ18 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD18 0x120204 +/* [RW 10] Bandwidth addition to VQ19 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD19 0x120208 +/* [RW 10] Bandwidth addition to VQ20 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD20 0x12020c +/* [RW 10] Bandwidth addition to VQ22 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD22 0x120210 +/* [RW 10] Bandwidth addition to VQ23 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD23 0x120214 +/* [RW 10] Bandwidth addition to VQ24 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD24 0x120218 +/* [RW 10] Bandwidth addition to VQ25 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD25 0x12021c +/* [RW 10] Bandwidth addition to VQ26 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD26 0x120220 +/* [RW 10] Bandwidth addition to VQ27 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD27 0x120224 +/* [RW 10] Bandwidth addition to VQ4 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD4 0x1201cc +/* [RW 10] Bandwidth addition to VQ5 read requests */ +#define PXP2_REG_RQ_BW_RD_ADD5 0x1201d0 +/* [RW 10] Bandwidth Typical L for VQ0 Read requests */ +#define PXP2_REG_RQ_BW_RD_L0 0x1202ac +/* [RW 10] Bandwidth Typical L for VQ12 Read requests */ +#define PXP2_REG_RQ_BW_RD_L12 0x1202dc +/* [RW 10] Bandwidth Typical L for VQ13 Read requests */ +#define PXP2_REG_RQ_BW_RD_L13 0x1202e0 +/* [RW 10] Bandwidth Typical L for VQ14 Read requests */ +#define PXP2_REG_RQ_BW_RD_L14 0x1202e4 +/* [RW 10] Bandwidth Typical L for VQ15 Read requests */ +#define PXP2_REG_RQ_BW_RD_L15 0x1202e8 +/* [RW 10] Bandwidth Typical L for VQ16 Read requests */ +#define PXP2_REG_RQ_BW_RD_L16 0x1202ec +/* [RW 10] Bandwidth Typical L for VQ17 Read requests */ +#define PXP2_REG_RQ_BW_RD_L17 0x1202f0 +/* [RW 10] Bandwidth Typical L for VQ18 Read requests */ +#define PXP2_REG_RQ_BW_RD_L18 0x1202f4 +/* [RW 10] Bandwidth Typical L for VQ19 Read requests */ +#define PXP2_REG_RQ_BW_RD_L19 0x1202f8 +/* [RW 10] Bandwidth Typical L for VQ20 Read requests */ +#define PXP2_REG_RQ_BW_RD_L20 0x1202fc +/* [RW 10] Bandwidth Typical L for VQ22 Read requests */ +#define PXP2_REG_RQ_BW_RD_L22 0x120300 +/* [RW 10] Bandwidth Typical L for VQ23 Read requests */ +#define PXP2_REG_RQ_BW_RD_L23 0x120304 +/* [RW 10] Bandwidth Typical L for VQ24 Read requests */ +#define PXP2_REG_RQ_BW_RD_L24 0x120308 +/* [RW 10] Bandwidth Typical L for VQ25 Read requests */ +#define PXP2_REG_RQ_BW_RD_L25 0x12030c +/* [RW 10] Bandwidth Typical L for VQ26 Read requests */ +#define PXP2_REG_RQ_BW_RD_L26 0x120310 +/* [RW 10] Bandwidth Typical L for VQ27 Read requests */ +#define PXP2_REG_RQ_BW_RD_L27 0x120314 +/* [RW 10] Bandwidth Typical L for VQ4 Read requests */ +#define PXP2_REG_RQ_BW_RD_L4 0x1202bc +/* [RW 10] Bandwidth Typical L for VQ5 Read- currently not used */ +#define PXP2_REG_RQ_BW_RD_L5 0x1202c0 +/* [RW 7] Bandwidth upper bound for VQ0 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND0 0x120234 +/* [RW 7] Bandwidth upper bound for VQ12 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND12 0x120264 +/* [RW 7] Bandwidth upper bound for VQ13 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND13 0x120268 +/* [RW 7] Bandwidth upper bound for VQ14 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND14 0x12026c +/* [RW 7] Bandwidth upper bound for VQ15 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND15 0x120270 +/* [RW 7] Bandwidth upper bound for VQ16 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND16 0x120274 +/* [RW 7] Bandwidth upper bound for VQ17 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND17 0x120278 +/* [RW 7] Bandwidth upper bound for VQ18 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND18 0x12027c +/* [RW 7] Bandwidth upper bound for VQ19 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND19 0x120280 +/* [RW 7] Bandwidth upper bound for VQ20 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND20 0x120284 +/* [RW 7] Bandwidth upper bound for VQ22 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND22 0x120288 +/* [RW 7] Bandwidth upper bound for VQ23 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND23 0x12028c +/* [RW 7] Bandwidth upper bound for VQ24 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND24 0x120290 +/* [RW 7] Bandwidth upper bound for VQ25 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND25 0x120294 +/* [RW 7] Bandwidth upper bound for VQ26 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND26 0x120298 +/* [RW 7] Bandwidth upper bound for VQ27 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND27 0x12029c +/* [RW 7] Bandwidth upper bound for VQ4 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND4 0x120244 +/* [RW 7] Bandwidth upper bound for VQ5 read requests */ +#define PXP2_REG_RQ_BW_RD_UBOUND5 0x120248 +/* [RW 10] Bandwidth addition to VQ29 write requests */ +#define PXP2_REG_RQ_BW_WR_ADD29 0x12022c +/* [RW 10] Bandwidth addition to VQ30 write requests */ +#define PXP2_REG_RQ_BW_WR_ADD30 0x120230 +/* [RW 10] Bandwidth Typical L for VQ29 Write requests */ +#define PXP2_REG_RQ_BW_WR_L29 0x12031c +/* [RW 10] Bandwidth Typical L for VQ30 Write requests */ +#define PXP2_REG_RQ_BW_WR_L30 0x120320 +/* [RW 7] Bandwidth upper bound for VQ29 */ +#define PXP2_REG_RQ_BW_WR_UBOUND29 0x1202a4 +/* [RW 7] Bandwidth upper bound for VQ30 */ +#define PXP2_REG_RQ_BW_WR_UBOUND30 0x1202a8 +/* [RW 2] Endian mode for cdu */ +#define PXP2_REG_RQ_CDU_ENDIAN_M 0x1201a0 +/* [RW 3] page size in L2P table for CDU module; -4k; -8k; -16k; -32k; -64k; + -128k */ +#define PXP2_REG_RQ_CDU_P_SIZE 0x120018 +/* [R 1] 1' indicates that the requester has finished its internal + configuration */ +#define PXP2_REG_RQ_CFG_DONE 0x1201b4 +/* [RW 2] Endian mode for debug */ +#define PXP2_REG_RQ_DBG_ENDIAN_M 0x1201a4 +/* [RW 1] When '1'; requests will enter input buffers but wont get out + towards the glue */ +#define PXP2_REG_RQ_DISABLE_INPUTS 0x120330 +/* [RW 2] Endian mode for hc */ +#define PXP2_REG_RQ_HC_ENDIAN_M 0x1201a8 +/* [WB 53] Onchip address table */ +#define PXP2_REG_RQ_ONCHIP_AT 0x122000 +/* [RW 2] Endian mode for qm */ +#define PXP2_REG_RQ_QM_ENDIAN_M 0x120194 +/* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k; + -128k */ +#define PXP2_REG_RQ_QM_P_SIZE 0x120050 +/* [RW 1] 1' indicates that the RBC has finished configurating the PSWRQ */ +#define PXP2_REG_RQ_RBC_DONE 0x1201b0 +/* [RW 3] Max burst size filed for read requests port 0; 000 - 128B; + 001:256B; 010: 512B; 11:1K:100:2K; 01:4K */ +#define PXP2_REG_RQ_RD_MBS0 0x120160 +/* [RW 2] Endian mode for src */ +#define PXP2_REG_RQ_SRC_ENDIAN_M 0x12019c +/* [RW 3] page size in L2P table for SRC module; -4k; -8k; -16k; -32k; -64k; + -128k */ +#define PXP2_REG_RQ_SRC_P_SIZE 0x12006c +/* [RW 2] Endian mode for tm */ +#define PXP2_REG_RQ_TM_ENDIAN_M 0x120198 +/* [RW 3] page size in L2P table for TM module; -4k; -8k; -16k; -32k; -64k; + -128k */ +#define PXP2_REG_RQ_TM_P_SIZE 0x120034 +/* [R 5] Number of entries in the ufifo; his fifo has l2p completions */ +#define PXP2_REG_RQ_UFIFO_NUM_OF_ENTRY 0x12080c +/* [R 8] Number of entries occupied by vq 0 in pswrq memory */ +#define PXP2_REG_RQ_VQ0_ENTRY_CNT 0x120810 +/* [R 8] Number of entries occupied by vq 10 in pswrq memory */ +#define PXP2_REG_RQ_VQ10_ENTRY_CNT 0x120818 +/* [R 8] Number of entries occupied by vq 11 in pswrq memory */ +#define PXP2_REG_RQ_VQ11_ENTRY_CNT 0x120820 +/* [R 8] Number of entries occupied by vq 12 in pswrq memory */ +#define PXP2_REG_RQ_VQ12_ENTRY_CNT 0x120828 +/* [R 8] Number of entries occupied by vq 13 in pswrq memory */ +#define PXP2_REG_RQ_VQ13_ENTRY_CNT 0x120830 +/* [R 8] Number of entries occupied by vq 14 in pswrq memory */ +#define PXP2_REG_RQ_VQ14_ENTRY_CNT 0x120838 +/* [R 8] Number of entries occupied by vq 15 in pswrq memory */ +#define PXP2_REG_RQ_VQ15_ENTRY_CNT 0x120840 +/* [R 8] Number of entries occupied by vq 16 in pswrq memory */ +#define PXP2_REG_RQ_VQ16_ENTRY_CNT 0x120848 +/* [R 8] Number of entries occupied by vq 17 in pswrq memory */ +#define PXP2_REG_RQ_VQ17_ENTRY_CNT 0x120850 +/* [R 8] Number of entries occupied by vq 18 in pswrq memory */ +#define PXP2_REG_RQ_VQ18_ENTRY_CNT 0x120858 +/* [R 8] Number of entries occupied by vq 19 in pswrq memory */ +#define PXP2_REG_RQ_VQ19_ENTRY_CNT 0x120860 +/* [R 8] Number of entries occupied by vq 1 in pswrq memory */ +#define PXP2_REG_RQ_VQ1_ENTRY_CNT 0x120868 +/* [R 8] Number of entries occupied by vq 20 in pswrq memory */ +#define PXP2_REG_RQ_VQ20_ENTRY_CNT 0x120870 +/* [R 8] Number of entries occupied by vq 21 in pswrq memory */ +#define PXP2_REG_RQ_VQ21_ENTRY_CNT 0x120878 +/* [R 8] Number of entries occupied by vq 22 in pswrq memory */ +#define PXP2_REG_RQ_VQ22_ENTRY_CNT 0x120880 +/* [R 8] Number of entries occupied by vq 23 in pswrq memory */ +#define PXP2_REG_RQ_VQ23_ENTRY_CNT 0x120888 +/* [R 8] Number of entries occupied by vq 24 in pswrq memory */ +#define PXP2_REG_RQ_VQ24_ENTRY_CNT 0x120890 +/* [R 8] Number of entries occupied by vq 25 in pswrq memory */ +#define PXP2_REG_RQ_VQ25_ENTRY_CNT 0x120898 +/* [R 8] Number of entries occupied by vq 26 in pswrq memory */ +#define PXP2_REG_RQ_VQ26_ENTRY_CNT 0x1208a0 +/* [R 8] Number of entries occupied by vq 27 in pswrq memory */ +#define PXP2_REG_RQ_VQ27_ENTRY_CNT 0x1208a8 +/* [R 8] Number of entries occupied by vq 28 in pswrq memory */ +#define PXP2_REG_RQ_VQ28_ENTRY_CNT 0x1208b0 +/* [R 8] Number of entries occupied by vq 29 in pswrq memory */ +#define PXP2_REG_RQ_VQ29_ENTRY_CNT 0x1208b8 +/* [R 8] Number of entries occupied by vq 2 in pswrq memory */ +#define PXP2_REG_RQ_VQ2_ENTRY_CNT 0x1208c0 +/* [R 8] Number of entries occupied by vq 30 in pswrq memory */ +#define PXP2_REG_RQ_VQ30_ENTRY_CNT 0x1208c8 +/* [R 8] Number of entries occupied by vq 31 in pswrq memory */ +#define PXP2_REG_RQ_VQ31_ENTRY_CNT 0x1208d0 +/* [R 8] Number of entries occupied by vq 3 in pswrq memory */ +#define PXP2_REG_RQ_VQ3_ENTRY_CNT 0x1208d8 +/* [R 8] Number of entries occupied by vq 4 in pswrq memory */ +#define PXP2_REG_RQ_VQ4_ENTRY_CNT 0x1208e0 +/* [R 8] Number of entries occupied by vq 5 in pswrq memory */ +#define PXP2_REG_RQ_VQ5_ENTRY_CNT 0x1208e8 +/* [R 8] Number of entries occupied by vq 6 in pswrq memory */ +#define PXP2_REG_RQ_VQ6_ENTRY_CNT 0x1208f0 +/* [R 8] Number of entries occupied by vq 7 in pswrq memory */ +#define PXP2_REG_RQ_VQ7_ENTRY_CNT 0x1208f8 +/* [R 8] Number of entries occupied by vq 8 in pswrq memory */ +#define PXP2_REG_RQ_VQ8_ENTRY_CNT 0x120900 +/* [R 8] Number of entries occupied by vq 9 in pswrq memory */ +#define PXP2_REG_RQ_VQ9_ENTRY_CNT 0x120908 +/* [RW 3] Max burst size filed for write requests port 0; 000 - 128B; + 001:256B; 010: 512B; */ +#define PXP2_REG_RQ_WR_MBS0 0x12015c +/* [RW 10] if Number of entries in dmae fifo will be higer than this + threshold then has_payload indication will be asserted; the default value + should be equal to > write MBS size! */ +#define PXP2_REG_WR_DMAE_TH 0x120368 +/* [R 1] debug only: Indication if PSWHST arbiter is idle */ +#define PXP_REG_HST_ARB_IS_IDLE 0x103004 +/* [R 8] debug only: A bit mask for all PSWHST arbiter clients. '1' means + this client is waiting for the arbiter. */ +#define PXP_REG_HST_CLIENTS_WAITING_TO_ARB 0x103008 +/* [WB 160] Used for initialization of the inbound interrupts memory */ +#define PXP_REG_HST_INBOUND_INT 0x103800 +/* [RW 32] Interrupt mask register #0 read/write */ +#define PXP_REG_PXP_INT_MASK_0 0x103074 +#define PXP_REG_PXP_INT_MASK_1 0x103084 +/* [R 32] Interrupt register #0 read */ +#define PXP_REG_PXP_INT_STS_0 0x103068 +#define PXP_REG_PXP_INT_STS_1 0x103078 +/* [RC 32] Interrupt register #0 read clear */ +#define PXP_REG_PXP_INT_STS_CLR_0 0x10306c +/* [RW 26] Parity mask register #0 read/write */ +#define PXP_REG_PXP_PRTY_MASK 0x103094 +/* [RW 4] The activity counter initial increment value sent in the load + request */ +#define QM_REG_ACTCTRINITVAL_0 0x168040 +#define QM_REG_ACTCTRINITVAL_1 0x168044 +#define QM_REG_ACTCTRINITVAL_2 0x168048 +#define QM_REG_ACTCTRINITVAL_3 0x16804c +/* [RW 32] The base logical address (in bytes) of each physical queue. The + index I represents the physical queue number. The 12 lsbs are ignore and + considered zero so practically there are only 20 bits in this register. */ +#define QM_REG_BASEADDR 0x168900 +/* [RW 16] The byte credit cost for each task. This value is for both ports */ +#define QM_REG_BYTECRDCOST 0x168234 +/* [RW 16] The initial byte credit value for both ports. */ +#define QM_REG_BYTECRDINITVAL 0x168238 +/* [RW 32] A bit per physical queue. If the bit is cleared then the physical + queue uses port 0 else it uses port 1. */ +#define QM_REG_BYTECRDPORT_LSB 0x168228 +/* [RW 32] A bit per physical queue. If the bit is cleared then the physical + queue uses port 0 else it uses port 1. */ +#define QM_REG_BYTECRDPORT_MSB 0x168224 +/* [RW 16] The byte credit value that if above the QM is considered almost + full */ +#define QM_REG_BYTECREDITAFULLTHR 0x168094 +/* [RW 4] The initial credit for interface */ +#define QM_REG_CMINITCRD_0 0x1680cc +#define QM_REG_CMINITCRD_1 0x1680d0 +#define QM_REG_CMINITCRD_2 0x1680d4 +#define QM_REG_CMINITCRD_3 0x1680d8 +#define QM_REG_CMINITCRD_4 0x1680dc +#define QM_REG_CMINITCRD_5 0x1680e0 +#define QM_REG_CMINITCRD_6 0x1680e4 +#define QM_REG_CMINITCRD_7 0x1680e8 +/* [RW 8] A mask bit per CM interface. If this bit is 0 then this interface + is masked */ +#define QM_REG_CMINTEN 0x1680ec +/* [RW 12] A bit vector which indicates which one of the queues are tied to + interface 0 */ +#define QM_REG_CMINTVOQMASK_0 0x1681f4 +#define QM_REG_CMINTVOQMASK_1 0x1681f8 +#define QM_REG_CMINTVOQMASK_2 0x1681fc +#define QM_REG_CMINTVOQMASK_3 0x168200 +#define QM_REG_CMINTVOQMASK_4 0x168204 +#define QM_REG_CMINTVOQMASK_5 0x168208 +#define QM_REG_CMINTVOQMASK_6 0x16820c +#define QM_REG_CMINTVOQMASK_7 0x168210 +/* [RW 20] The number of connections divided by 16 which dictates the size + of each queue per port 0 */ +#define QM_REG_CONNNUM_0 0x168020 +/* [R 6] Keep the fill level of the fifo from write client 4 */ +#define QM_REG_CQM_WRC_FIFOLVL 0x168018 +/* [RW 8] The context regions sent in the CFC load request */ +#define QM_REG_CTXREG_0 0x168030 +#define QM_REG_CTXREG_1 0x168034 +#define QM_REG_CTXREG_2 0x168038 +#define QM_REG_CTXREG_3 0x16803c +/* [RW 12] The VOQ mask used to select the VOQs which needs to be full for + bypass enable */ +#define QM_REG_ENBYPVOQMASK 0x16823c +/* [RW 32] A bit mask per each physical queue. If a bit is set then the + physical queue uses the byte credit */ +#define QM_REG_ENBYTECRD_LSB 0x168220 +/* [RW 32] A bit mask per each physical queue. If a bit is set then the + physical queue uses the byte credit */ +#define QM_REG_ENBYTECRD_MSB 0x16821c +/* [RW 4] If cleared then the secondary interface will not be served by the + RR arbiter */ +#define QM_REG_ENSEC 0x1680f0 +/* [RW 32] A bit vector per each physical queue which selects which function + number to use on PCI access for that queue. */ +#define QM_REG_FUNCNUMSEL_LSB 0x168230 +/* [RW 32] A bit vector per each physical queue which selects which function + number to use on PCI access for that queue. */ +#define QM_REG_FUNCNUMSEL_MSB 0x16822c +/* [RW 32] A mask register to mask the Almost empty signals which will not + be use for the almost empty indication to the HW block */ +#define QM_REG_HWAEMPTYMASK_LSB 0x168218 +/* [RW 32] A mask register to mask the Almost empty signals which will not + be use for the almost empty indication to the HW block */ +#define QM_REG_HWAEMPTYMASK_MSB 0x168214 +/* [RW 4] The number of outstanding request to CFC */ +#define QM_REG_OUTLDREQ 0x168804 +/* [RC 1] A flag to indicate that overflow error occurred in one of the + queues. */ +#define QM_REG_OVFERROR 0x16805c +/* [RC 6] the Q were the qverflow occurs */ +#define QM_REG_OVFQNUM 0x168058 +/* [R 32] Pause state for physical queues 31-0 */ +#define QM_REG_PAUSESTATE0 0x168410 +/* [R 32] Pause state for physical queues 64-32 */ +#define QM_REG_PAUSESTATE1 0x168414 +/* [RW 2] The PCI attributes field used in the PCI request. */ +#define QM_REG_PCIREQAT 0x168054 +/* [R 16] The byte credit of port 0 */ +#define QM_REG_PORT0BYTECRD 0x168300 +/* [R 16] The byte credit of port 1 */ +#define QM_REG_PORT1BYTECRD 0x168304 +/* [WB 54] Pointer Table Memory; The mapping is as follow: ptrtbl[53:30] + read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read bank0; + ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */ +#define QM_REG_PTRTBL 0x168a00 +/* [RW 2] Interrupt mask register #0 read/write */ +#define QM_REG_QM_INT_MASK 0x168444 +/* [R 2] Interrupt register #0 read */ +#define QM_REG_QM_INT_STS 0x168438 +/* [RW 9] Parity mask register #0 read/write */ +#define QM_REG_QM_PRTY_MASK 0x168454 +/* [R 32] Current queues in pipeline: Queues from 32 to 63 */ +#define QM_REG_QSTATUS_HIGH 0x16802c +/* [R 32] Current queues in pipeline: Queues from 0 to 31 */ +#define QM_REG_QSTATUS_LOW 0x168028 +/* [R 24] The number of tasks queued for each queue */ +#define QM_REG_QTASKCTR_0 0x168308 +/* [RW 4] Queue tied to VOQ */ +#define QM_REG_QVOQIDX_0 0x1680f4 +#define QM_REG_QVOQIDX_10 0x16811c +#define QM_REG_QVOQIDX_11 0x168120 +#define QM_REG_QVOQIDX_12 0x168124 +#define QM_REG_QVOQIDX_13 0x168128 +#define QM_REG_QVOQIDX_14 0x16812c +#define QM_REG_QVOQIDX_15 0x168130 +#define QM_REG_QVOQIDX_16 0x168134 +#define QM_REG_QVOQIDX_17 0x168138 +#define QM_REG_QVOQIDX_21 0x168148 +#define QM_REG_QVOQIDX_25 0x168158 +#define QM_REG_QVOQIDX_29 0x168168 +#define QM_REG_QVOQIDX_32 0x168174 +#define QM_REG_QVOQIDX_33 0x168178 +#define QM_REG_QVOQIDX_34 0x16817c +#define QM_REG_QVOQIDX_35 0x168180 +#define QM_REG_QVOQIDX_36 0x168184 +#define QM_REG_QVOQIDX_37 0x168188 +#define QM_REG_QVOQIDX_38 0x16818c +#define QM_REG_QVOQIDX_39 0x168190 +#define QM_REG_QVOQIDX_40 0x168194 +#define QM_REG_QVOQIDX_41 0x168198 +#define QM_REG_QVOQIDX_42 0x16819c +#define QM_REG_QVOQIDX_43 0x1681a0 +#define QM_REG_QVOQIDX_44 0x1681a4 +#define QM_REG_QVOQIDX_45 0x1681a8 +#define QM_REG_QVOQIDX_46 0x1681ac +#define QM_REG_QVOQIDX_47 0x1681b0 +#define QM_REG_QVOQIDX_48 0x1681b4 +#define QM_REG_QVOQIDX_49 0x1681b8 +#define QM_REG_QVOQIDX_5 0x168108 +#define QM_REG_QVOQIDX_50 0x1681bc +#define QM_REG_QVOQIDX_51 0x1681c0 +#define QM_REG_QVOQIDX_52 0x1681c4 +#define QM_REG_QVOQIDX_53 0x1681c8 +#define QM_REG_QVOQIDX_54 0x1681cc +#define QM_REG_QVOQIDX_55 0x1681d0 +#define QM_REG_QVOQIDX_56 0x1681d4 +#define QM_REG_QVOQIDX_57 0x1681d8 +#define QM_REG_QVOQIDX_58 0x1681dc +#define QM_REG_QVOQIDX_59 0x1681e0 +#define QM_REG_QVOQIDX_50 0x1681bc +#define QM_REG_QVOQIDX_51 0x1681c0 +#define QM_REG_QVOQIDX_52 0x1681c4 +#define QM_REG_QVOQIDX_53 0x1681c8 +#define QM_REG_QVOQIDX_54 0x1681cc +#define QM_REG_QVOQIDX_55 0x1681d0 +#define QM_REG_QVOQIDX_56 0x1681d4 +#define QM_REG_QVOQIDX_57 0x1681d8 +#define QM_REG_QVOQIDX_58 0x1681dc +#define QM_REG_QVOQIDX_59 0x1681e0 +#define QM_REG_QVOQIDX_6 0x16810c +#define QM_REG_QVOQIDX_60 0x1681e4 +#define QM_REG_QVOQIDX_61 0x1681e8 +#define QM_REG_QVOQIDX_62 0x1681ec +#define QM_REG_QVOQIDX_63 0x1681f0 +#define QM_REG_QVOQIDX_60 0x1681e4 +#define QM_REG_QVOQIDX_61 0x1681e8 +#define QM_REG_QVOQIDX_62 0x1681ec +#define QM_REG_QVOQIDX_63 0x1681f0 +#define QM_REG_QVOQIDX_7 0x168110 +#define QM_REG_QVOQIDX_8 0x168114 +#define QM_REG_QVOQIDX_9 0x168118 +/* [R 24] Remaining pause timeout for port 0 */ +#define QM_REG_REMAINPAUSETM0 0x168418 +/* [R 24] Remaining pause timeout for port 1 */ +#define QM_REG_REMAINPAUSETM1 0x16841c +/* [RW 1] Initialization bit command */ +#define QM_REG_SOFT_RESET 0x168428 +/* [RW 8] The credit cost per every task in the QM. A value per each VOQ */ +#define QM_REG_TASKCRDCOST_0 0x16809c +#define QM_REG_TASKCRDCOST_1 0x1680a0 +#define QM_REG_TASKCRDCOST_10 0x1680c4 +#define QM_REG_TASKCRDCOST_11 0x1680c8 +#define QM_REG_TASKCRDCOST_2 0x1680a4 +#define QM_REG_TASKCRDCOST_4 0x1680ac +#define QM_REG_TASKCRDCOST_5 0x1680b0 +/* [R 6] Keep the fill level of the fifo from write client 3 */ +#define QM_REG_TQM_WRC_FIFOLVL 0x168010 +/* [R 6] Keep the fill level of the fifo from write client 2 */ +#define QM_REG_UQM_WRC_FIFOLVL 0x168008 +/* [RC 32] Credit update error register */ +#define QM_REG_VOQCRDERRREG 0x168408 +/* [R 16] The credit value for each VOQ */ +#define QM_REG_VOQCREDIT_0 0x1682d0 +#define QM_REG_VOQCREDIT_1 0x1682d4 +#define QM_REG_VOQCREDIT_10 0x1682f8 +#define QM_REG_VOQCREDIT_11 0x1682fc +#define QM_REG_VOQCREDIT_4 0x1682e0 +/* [RW 16] The credit value that if above the QM is considered almost full */ +#define QM_REG_VOQCREDITAFULLTHR 0x168090 +/* [RW 16] The init and maximum credit for each VoQ */ +#define QM_REG_VOQINITCREDIT_0 0x168060 +#define QM_REG_VOQINITCREDIT_1 0x168064 +#define QM_REG_VOQINITCREDIT_10 0x168088 +#define QM_REG_VOQINITCREDIT_11 0x16808c +#define QM_REG_VOQINITCREDIT_2 0x168068 +#define QM_REG_VOQINITCREDIT_4 0x168070 +#define QM_REG_VOQINITCREDIT_5 0x168074 +/* [RW 1] The port of which VOQ belongs */ +#define QM_REG_VOQPORT_1 0x1682a4 +#define QM_REG_VOQPORT_10 0x1682c8 +#define QM_REG_VOQPORT_11 0x1682cc +#define QM_REG_VOQPORT_2 0x1682a8 +/* [RW 32] The physical queue number associated with each VOQ */ +#define QM_REG_VOQQMASK_0_LSB 0x168240 +/* [RW 32] The physical queue number associated with each VOQ */ +#define QM_REG_VOQQMASK_0_MSB 0x168244 +/* [RW 32] The physical queue number associated with each VOQ */ +#define QM_REG_VOQQMASK_1_MSB 0x16824c +/* [RW 32] The physical queue number associated with each VOQ */ +#define QM_REG_VOQQMASK_2_LSB 0x168250 +/* [RW 32] The physical queue number associated with each VOQ */ +#define QM_REG_VOQQMASK_2_MSB 0x168254 +/* [RW 32] The physical queue number associated with each VOQ */ +#define QM_REG_VOQQMASK_3_LSB 0x168258 +/* [RW 32] The physical queue number associated with each VOQ */ +#define QM_REG_VOQQMASK_4_LSB 0x168260 +/* [RW 32] The physical queue number associated with each VOQ */ +#define QM_REG_VOQQMASK_4_MSB 0x168264 +/* [RW 32] The physical queue number associated with each VOQ */ +#define QM_REG_VOQQMASK_5_LSB 0x168268 +/* [RW 32] The physical queue number associated with each VOQ */ +#define QM_REG_VOQQMASK_5_MSB 0x16826c +/* [RW 32] The physical queue number associated with each VOQ */ +#define QM_REG_VOQQMASK_6_LSB 0x168270 +/* [RW 32] The physical queue number associated with each VOQ */ +#define QM_REG_VOQQMASK_6_MSB 0x168274 +/* [RW 32] The physical queue number associated with each VOQ */ +#define QM_REG_VOQQMASK_7_LSB 0x168278 +/* [RW 32] The physical queue number associated with each VOQ */ +#define QM_REG_VOQQMASK_7_MSB 0x16827c +/* [RW 32] The physical queue number associated with each VOQ */ +#define QM_REG_VOQQMASK_8_LSB 0x168280 +/* [RW 32] The physical queue number associated with each VOQ */ +#define QM_REG_VOQQMASK_8_MSB 0x168284 +/* [RW 32] The physical queue number associated with each VOQ */ +#define QM_REG_VOQQMASK_9_LSB 0x168288 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_0 0x16880c +#define QM_REG_WRRWEIGHTS_1 0x168810 +#define QM_REG_WRRWEIGHTS_10 0x168814 +#define QM_REG_WRRWEIGHTS_10_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_11 0x168818 +#define QM_REG_WRRWEIGHTS_11_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_12 0x16881c +#define QM_REG_WRRWEIGHTS_12_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_13 0x168820 +#define QM_REG_WRRWEIGHTS_13_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_14 0x168824 +#define QM_REG_WRRWEIGHTS_14_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_15 0x168828 +#define QM_REG_WRRWEIGHTS_15_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_10 0x168814 +#define QM_REG_WRRWEIGHTS_11 0x168818 +#define QM_REG_WRRWEIGHTS_12 0x16881c +#define QM_REG_WRRWEIGHTS_13 0x168820 +#define QM_REG_WRRWEIGHTS_14 0x168824 +#define QM_REG_WRRWEIGHTS_15 0x168828 +#define QM_REG_WRRWEIGHTS_2 0x16882c +#define QM_REG_WRRWEIGHTS_3 0x168830 +#define QM_REG_WRRWEIGHTS_4 0x168834 +#define QM_REG_WRRWEIGHTS_5 0x168838 +#define QM_REG_WRRWEIGHTS_6 0x16883c +#define QM_REG_WRRWEIGHTS_7 0x168840 +#define QM_REG_WRRWEIGHTS_8 0x168844 +#define QM_REG_WRRWEIGHTS_9 0x168848 +/* [R 6] Keep the fill level of the fifo from write client 1 */ +#define QM_REG_XQM_WRC_FIFOLVL 0x168000 +#define DORQ_DORQ_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define DORQ_DORQ_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define DORQ_DORQ_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define DORQ_DORQ_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define DORQ_DORQ_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define DORQ_DORQ_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define DORQ_DORQ_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define DORQ_DORQ_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define NIG_NIG_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0) +#define NIG_NIG_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0 +#define NIG_NIG_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0) +#define NIG_NIG_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0 +#define NIG_NIG_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0) +#define NIG_NIG_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0 +#define NIG_NIG_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0) +#define NIG_NIG_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0 +#define TCM_TCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0) +#define TCM_TCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0 +#define TCM_TCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0) +#define TCM_TCM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0 +#define TCM_TCM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0) +#define TCM_TCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0 +#define TCM_TCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0) +#define TCM_TCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0 +#define CFC_DEBUG1_REG_WRITE_AC (0x1<<4) +#define CFC_DEBUG1_REG_WRITE_AC_SIZE 4 +/* [R 1] debug only: This bit indicates wheter indicates that external + buffer was wrapped (oldest data was thrown); Relevant only when + ~dbg_registers_debug_target=2 (PCI) & ~dbg_registers_full_mode=1 (wrap); */ +#define DBG_REG_WRAP_ON_EXT_BUFFER 0xc124 +#define DBG_REG_WRAP_ON_EXT_BUFFER_SIZE 1 +/* [R 1] debug only: This bit indicates wheter the internal buffer was + wrapped (oldest data was thrown) Relevant only when + ~dbg_registers_debug_target=0 (internal buffer) */ +#define DBG_REG_WRAP_ON_INT_BUFFER 0xc128 +#define DBG_REG_WRAP_ON_INT_BUFFER_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_0 0x16880c +#define QM_REG_WRRWEIGHTS_0_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_1 0x168810 +#define QM_REG_WRRWEIGHTS_1_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_10 0x168814 +#define QM_REG_WRRWEIGHTS_10_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_11 0x168818 +#define QM_REG_WRRWEIGHTS_11_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_12 0x16881c +#define QM_REG_WRRWEIGHTS_12_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_13 0x168820 +#define QM_REG_WRRWEIGHTS_13_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_14 0x168824 +#define QM_REG_WRRWEIGHTS_14_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_15 0x168828 +#define QM_REG_WRRWEIGHTS_15_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_2 0x16882c +#define QM_REG_WRRWEIGHTS_2_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_3 0x168830 +#define QM_REG_WRRWEIGHTS_3_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_4 0x168834 +#define QM_REG_WRRWEIGHTS_4_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_5 0x168838 +#define QM_REG_WRRWEIGHTS_5_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_6 0x16883c +#define QM_REG_WRRWEIGHTS_6_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_7 0x168840 +#define QM_REG_WRRWEIGHTS_7_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_8 0x168844 +#define QM_REG_WRRWEIGHTS_8_SIZE 1 +/* [RW 32] Wrr weights */ +#define QM_REG_WRRWEIGHTS_9 0x168848 +#define QM_REG_WRRWEIGHTS_9_SIZE 1 +/* [RW 22] Number of free element in the free list of T2 entries - port 0. */ +#define SRC_REG_COUNTFREE0 0x40500 +/* [WB 64] First free element in the free list of T2 entries - port 0. */ +#define SRC_REG_FIRSTFREE0 0x40510 +#define SRC_REG_KEYRSS0_0 0x40408 +#define SRC_REG_KEYRSS1_9 0x40454 +/* [WB 64] Last free element in the free list of T2 entries - port 0. */ +#define SRC_REG_LASTFREE0 0x40530 +/* [RW 5] The number of hash bits used for the search (h); Values can be 8 + to 24. */ +#define SRC_REG_NUMBER_HASH_BITS0 0x40400 +/* [RW 1] Reset internal state machines. */ +#define SRC_REG_SOFT_RST 0x4049c +/* [R 1] Interrupt register #0 read */ +#define SRC_REG_SRC_INT_STS 0x404ac +/* [RW 3] Parity mask register #0 read/write */ +#define SRC_REG_SRC_PRTY_MASK 0x404c8 +/* [R 4] Used to read the value of the XX protection CAM occupancy counter. */ +#define TCM_REG_CAM_OCCUP 0x5017c +/* [RW 1] CDU AG read Interface enable. If 0 - the request input is + disregarded; valid output is deasserted; all other signals are treated as + usual; if 1 - normal activity. */ +#define TCM_REG_CDU_AG_RD_IFEN 0x50034 +/* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input + are disregarded; all other signals are treated as usual; if 1 - normal + activity. */ +#define TCM_REG_CDU_AG_WR_IFEN 0x50030 +/* [RW 1] CDU STORM read Interface enable. If 0 - the request input is + disregarded; valid output is deasserted; all other signals are treated as + usual; if 1 - normal activity. */ +#define TCM_REG_CDU_SM_RD_IFEN 0x5003c +/* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid + input is disregarded; all other signals are treated as usual; if 1 - + normal activity. */ +#define TCM_REG_CDU_SM_WR_IFEN 0x50038 +/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes + the initial credit value; read returns the current value of the credit + counter. Must be initialized to 1 at start-up. */ +#define TCM_REG_CFC_INIT_CRD 0x50204 +/* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_CP_WEIGHT 0x500c0 +/* [RW 1] Input csem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define TCM_REG_CSEM_IFEN 0x5002c +/* [RC 1] Message length mismatch (relative to last indication) at the In#9 + interface. */ +#define TCM_REG_CSEM_LENGTH_MIS 0x50174 +/* [RW 8] The Event ID in case of ErrorFlg is set in the input message. */ +#define TCM_REG_ERR_EVNT_ID 0x500a0 +/* [RW 28] The CM erroneous header for QM and Timers formatting. */ +#define TCM_REG_ERR_TCM_HDR 0x5009c +/* [RW 8] The Event ID for Timers expiration. */ +#define TCM_REG_EXPR_EVNT_ID 0x500a4 +/* [RW 8] FIC0 output initial credit. Max credit available - 255.Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 64 at start-up. */ +#define TCM_REG_FIC0_INIT_CRD 0x5020c +/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 64 at start-up. */ +#define TCM_REG_FIC1_INIT_CRD 0x50210 +/* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1 + - strict priority defined by ~tcm_registers_gr_ag_pr.gr_ag_pr; + ~tcm_registers_gr_ld0_pr.gr_ld0_pr and + ~tcm_registers_gr_ld1_pr.gr_ld1_pr. */ +#define TCM_REG_GR_ARB_TYPE 0x50114 +/* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the + highest priority is 3. It is supposed that the Store channel is the + compliment of the other 3 groups. */ +#define TCM_REG_GR_LD0_PR 0x5011c +/* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the + highest priority is 3. It is supposed that the Store channel is the + compliment of the other 3 groups. */ +#define TCM_REG_GR_LD1_PR 0x50120 +/* [RW 4] The number of double REG-pairs; loaded from the STORM context and + sent to STORM; for a specific connection type. The double REG-pairs are + used to align to STORM context row size of 128 bits. The offset of these + data in the STORM context is always 0. Index _i stands for the connection + type (one of 16). */ +#define TCM_REG_N_SM_CTX_LD_0 0x50050 +#define TCM_REG_N_SM_CTX_LD_1 0x50054 +#define TCM_REG_N_SM_CTX_LD_10 0x50078 +#define TCM_REG_N_SM_CTX_LD_11 0x5007c +#define TCM_REG_N_SM_CTX_LD_12 0x50080 +#define TCM_REG_N_SM_CTX_LD_13 0x50084 +#define TCM_REG_N_SM_CTX_LD_14 0x50088 +#define TCM_REG_N_SM_CTX_LD_15 0x5008c +#define TCM_REG_N_SM_CTX_LD_2 0x50058 +#define TCM_REG_N_SM_CTX_LD_3 0x5005c +#define TCM_REG_N_SM_CTX_LD_4 0x50060 +/* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define TCM_REG_PBF_IFEN 0x50024 +/* [RC 1] Message length mismatch (relative to last indication) at the In#7 + interface. */ +#define TCM_REG_PBF_LENGTH_MIS 0x5016c +/* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_PBF_WEIGHT 0x500b4 +/* [RW 6] The physical queue number 0 per port index. */ +#define TCM_REG_PHYS_QNUM0_0 0x500e0 +#define TCM_REG_PHYS_QNUM0_1 0x500e4 +/* [RW 6] The physical queue number 1 per port index. */ +#define TCM_REG_PHYS_QNUM1_0 0x500e8 +/* [RW 1] Input prs Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define TCM_REG_PRS_IFEN 0x50020 +/* [RC 1] Message length mismatch (relative to last indication) at the In#6 + interface. */ +#define TCM_REG_PRS_LENGTH_MIS 0x50168 +/* [RW 3] The weight of the input prs in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_PRS_WEIGHT 0x500b0 +/* [RW 8] The Event ID for Timers formatting in case of stop done. */ +#define TCM_REG_STOP_EVNT_ID 0x500a8 +/* [RC 1] Message length mismatch (relative to last indication) at the STORM + interface. */ +#define TCM_REG_STORM_LENGTH_MIS 0x50160 +/* [RW 1] STORM - CM Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define TCM_REG_STORM_TCM_IFEN 0x50010 +/* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define TCM_REG_TCM_CFC_IFEN 0x50040 +/* [RW 11] Interrupt mask register #0 read/write */ +#define TCM_REG_TCM_INT_MASK 0x501dc +/* [R 11] Interrupt register #0 read */ +#define TCM_REG_TCM_INT_STS 0x501d0 +/* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS + REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5). + Is used to determine the number of the AG context REG-pairs written back; + when the input message Reg1WbFlg isn't set. */ +#define TCM_REG_TCM_REG0_SZ 0x500d8 +/* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define TCM_REG_TCM_STORM0_IFEN 0x50004 +/* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define TCM_REG_TCM_STORM1_IFEN 0x50008 +/* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define TCM_REG_TCM_TQM_IFEN 0x5000c +/* [RW 1] If set the Q index; received from the QM is inserted to event ID. */ +#define TCM_REG_TCM_TQM_USE_Q 0x500d4 +/* [RW 28] The CM header for Timers expiration command. */ +#define TCM_REG_TM_TCM_HDR 0x50098 +/* [RW 1] Timers - CM Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define TCM_REG_TM_TCM_IFEN 0x5001c +/* [RW 6] QM output initial credit. Max credit available - 32.Write writes + the initial credit value; read returns the current value of the credit + counter. Must be initialized to 32 at start-up. */ +#define TCM_REG_TQM_INIT_CRD 0x5021c +/* [RW 28] The CM header value for QM request (primary). */ +#define TCM_REG_TQM_TCM_HDR_P 0x50090 +/* [RW 28] The CM header value for QM request (secondary). */ +#define TCM_REG_TQM_TCM_HDR_S 0x50094 +/* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define TCM_REG_TQM_TCM_IFEN 0x50014 +/* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define TCM_REG_TSDM_IFEN 0x50018 +/* [RC 1] Message length mismatch (relative to last indication) at the SDM + interface. */ +#define TCM_REG_TSDM_LENGTH_MIS 0x50164 +/* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define TCM_REG_TSDM_WEIGHT 0x500c4 +/* [RW 1] Input usem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define TCM_REG_USEM_IFEN 0x50028 +/* [RC 1] Message length mismatch (relative to last indication) at the In#8 + interface. */ +#define TCM_REG_USEM_LENGTH_MIS 0x50170 +/* [RW 21] Indirect access to the descriptor table of the XX protection + mechanism. The fields are: [5:0] - length of the message; 15:6] - message + pointer; 20:16] - next pointer. */ +#define TCM_REG_XX_DESCR_TABLE 0x50280 +/* [R 6] Use to read the value of XX protection Free counter. */ +#define TCM_REG_XX_FREE 0x50178 +/* [RW 6] Initial value for the credit counter; responsible for fulfilling + of the Input Stage XX protection buffer by the XX protection pending + messages. Max credit available - 127.Write writes the initial credit + value; read returns the current value of the credit counter. Must be + initialized to 19 at start-up. */ +#define TCM_REG_XX_INIT_CRD 0x50220 +/* [RW 6] Maximum link list size (messages locked) per connection in the XX + protection. */ +#define TCM_REG_XX_MAX_LL_SZ 0x50044 +/* [RW 6] The maximum number of pending messages; which may be stored in XX + protection. ~tcm_registers_xx_free.xx_free is read on read. */ +#define TCM_REG_XX_MSG_NUM 0x50224 +/* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */ +#define TCM_REG_XX_OVFL_EVNT_ID 0x50048 +/* [RW 16] Indirect access to the XX table of the XX protection mechanism. + The fields are:[4:0] - tail pointer; [10:5] - Link List size; 15:11] - + header pointer. */ +#define TCM_REG_XX_TABLE 0x50240 +/* [RW 4] Load value for for cfc ac credit cnt. */ +#define TM_REG_CFC_AC_CRDCNT_VAL 0x164208 +/* [RW 4] Load value for cfc cld credit cnt. */ +#define TM_REG_CFC_CLD_CRDCNT_VAL 0x164210 +/* [RW 8] Client0 context region. */ +#define TM_REG_CL0_CONT_REGION 0x164030 +/* [RW 8] Client1 context region. */ +#define TM_REG_CL1_CONT_REGION 0x164034 +/* [RW 8] Client2 context region. */ +#define TM_REG_CL2_CONT_REGION 0x164038 +/* [RW 2] Client in High priority client number. */ +#define TM_REG_CLIN_PRIOR0_CLIENT 0x164024 +/* [RW 4] Load value for clout0 cred cnt. */ +#define TM_REG_CLOUT_CRDCNT0_VAL 0x164220 +/* [RW 4] Load value for clout1 cred cnt. */ +#define TM_REG_CLOUT_CRDCNT1_VAL 0x164228 +/* [RW 4] Load value for clout2 cred cnt. */ +#define TM_REG_CLOUT_CRDCNT2_VAL 0x164230 +/* [RW 1] Enable client0 input. */ +#define TM_REG_EN_CL0_INPUT 0x164008 +/* [RW 1] Enable client1 input. */ +#define TM_REG_EN_CL1_INPUT 0x16400c +/* [RW 1] Enable client2 input. */ +#define TM_REG_EN_CL2_INPUT 0x164010 +/* [RW 1] Enable real time counter. */ +#define TM_REG_EN_REAL_TIME_CNT 0x1640d8 +/* [RW 1] Enable for Timers state machines. */ +#define TM_REG_EN_TIMERS 0x164000 +/* [RW 4] Load value for expiration credit cnt. CFC max number of + outstanding load requests for timers (expiration) context loading. */ +#define TM_REG_EXP_CRDCNT_VAL 0x164238 +/* [RW 18] Linear0 Max active cid. */ +#define TM_REG_LIN0_MAX_ACTIVE_CID 0x164048 +/* [WB 64] Linear0 phy address. */ +#define TM_REG_LIN0_PHY_ADDR 0x164270 +/* [RW 24] Linear0 array scan timeout. */ +#define TM_REG_LIN0_SCAN_TIME 0x16403c +/* [WB 64] Linear1 phy address. */ +#define TM_REG_LIN1_PHY_ADDR 0x164280 +/* [RW 6] Linear timer set_clear fifo threshold. */ +#define TM_REG_LIN_SETCLR_FIFO_ALFULL_THR 0x164070 +/* [RW 2] Load value for pci arbiter credit cnt. */ +#define TM_REG_PCIARB_CRDCNT_VAL 0x164260 +/* [RW 1] Timer software reset - active high. */ +#define TM_REG_TIMER_SOFT_RST 0x164004 +/* [RW 20] The amount of hardware cycles for each timer tick. */ +#define TM_REG_TIMER_TICK_SIZE 0x16401c +/* [RW 8] Timers Context region. */ +#define TM_REG_TM_CONTEXT_REGION 0x164044 +/* [RW 1] Interrupt mask register #0 read/write */ +#define TM_REG_TM_INT_MASK 0x1640fc +/* [R 1] Interrupt register #0 read */ +#define TM_REG_TM_INT_STS 0x1640f0 +/* [RW 8] The event id for aggregated interrupt 0 */ +#define TSDM_REG_AGG_INT_EVENT_0 0x42038 +/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */ +#define TSDM_REG_CFC_RSP_START_ADDR 0x42008 +/* [RW 16] The maximum value of the competion counter #0 */ +#define TSDM_REG_CMP_COUNTER_MAX0 0x4201c +/* [RW 16] The maximum value of the competion counter #1 */ +#define TSDM_REG_CMP_COUNTER_MAX1 0x42020 +/* [RW 16] The maximum value of the competion counter #2 */ +#define TSDM_REG_CMP_COUNTER_MAX2 0x42024 +/* [RW 16] The maximum value of the competion counter #3 */ +#define TSDM_REG_CMP_COUNTER_MAX3 0x42028 +/* [RW 13] The start address in the internal RAM for the completion + counters. */ +#define TSDM_REG_CMP_COUNTER_START_ADDR 0x4200c +#define TSDM_REG_ENABLE_IN1 0x42238 +#define TSDM_REG_ENABLE_IN2 0x4223c +#define TSDM_REG_ENABLE_OUT1 0x42240 +#define TSDM_REG_ENABLE_OUT2 0x42244 +/* [RW 4] The initial number of messages that can be sent to the pxp control + interface without receiving any ACK. */ +#define TSDM_REG_INIT_CREDIT_PXP_CTRL 0x424bc +/* [ST 32] The number of ACK after placement messages received */ +#define TSDM_REG_NUM_OF_ACK_AFTER_PLACE 0x4227c +/* [ST 32] The number of packet end messages received from the parser */ +#define TSDM_REG_NUM_OF_PKT_END_MSG 0x42274 +/* [ST 32] The number of requests received from the pxp async if */ +#define TSDM_REG_NUM_OF_PXP_ASYNC_REQ 0x42278 +/* [ST 32] The number of commands received in queue 0 */ +#define TSDM_REG_NUM_OF_Q0_CMD 0x42248 +/* [ST 32] The number of commands received in queue 10 */ +#define TSDM_REG_NUM_OF_Q10_CMD 0x4226c +/* [ST 32] The number of commands received in queue 11 */ +#define TSDM_REG_NUM_OF_Q11_CMD 0x42270 +/* [ST 32] The number of commands received in queue 1 */ +#define TSDM_REG_NUM_OF_Q1_CMD 0x4224c +/* [ST 32] The number of commands received in queue 3 */ +#define TSDM_REG_NUM_OF_Q3_CMD 0x42250 +/* [ST 32] The number of commands received in queue 4 */ +#define TSDM_REG_NUM_OF_Q4_CMD 0x42254 +/* [ST 32] The number of commands received in queue 5 */ +#define TSDM_REG_NUM_OF_Q5_CMD 0x42258 +/* [ST 32] The number of commands received in queue 6 */ +#define TSDM_REG_NUM_OF_Q6_CMD 0x4225c +/* [ST 32] The number of commands received in queue 7 */ +#define TSDM_REG_NUM_OF_Q7_CMD 0x42260 +/* [ST 32] The number of commands received in queue 8 */ +#define TSDM_REG_NUM_OF_Q8_CMD 0x42264 +/* [ST 32] The number of commands received in queue 9 */ +#define TSDM_REG_NUM_OF_Q9_CMD 0x42268 +/* [RW 13] The start address in the internal RAM for the packet end message */ +#define TSDM_REG_PCK_END_MSG_START_ADDR 0x42014 +/* [RW 13] The start address in the internal RAM for queue counters */ +#define TSDM_REG_Q_COUNTER_START_ADDR 0x42010 +/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */ +#define TSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0x42548 +/* [R 1] parser fifo empty in sdm_sync block */ +#define TSDM_REG_SYNC_PARSER_EMPTY 0x42550 +/* [R 1] parser serial fifo empty in sdm_sync block */ +#define TSDM_REG_SYNC_SYNC_EMPTY 0x42558 +/* [RW 32] Tick for timer counter. Applicable only when + ~tsdm_registers_timer_tick_enable.timer_tick_enable =1 */ +#define TSDM_REG_TIMER_TICK 0x42000 +/* [RW 32] Interrupt mask register #0 read/write */ +#define TSDM_REG_TSDM_INT_MASK_0 0x4229c +#define TSDM_REG_TSDM_INT_MASK_1 0x422ac +/* [RW 11] Parity mask register #0 read/write */ +#define TSDM_REG_TSDM_PRTY_MASK 0x422bc +/* [RW 5] The number of time_slots in the arbitration cycle */ +#define TSEM_REG_ARB_CYCLE_SIZE 0x180034 +/* [RW 3] The source that is associated with arbitration element 0. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2 */ +#define TSEM_REG_ARB_ELEMENT0 0x180020 +/* [RW 3] The source that is associated with arbitration element 1. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~tsem_registers_arb_element0.arb_element0 */ +#define TSEM_REG_ARB_ELEMENT1 0x180024 +/* [RW 3] The source that is associated with arbitration element 2. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~tsem_registers_arb_element0.arb_element0 + and ~tsem_registers_arb_element1.arb_element1 */ +#define TSEM_REG_ARB_ELEMENT2 0x180028 +/* [RW 3] The source that is associated with arbitration element 3. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2.Could + not be equal to register ~tsem_registers_arb_element0.arb_element0 and + ~tsem_registers_arb_element1.arb_element1 and + ~tsem_registers_arb_element2.arb_element2 */ +#define TSEM_REG_ARB_ELEMENT3 0x18002c +/* [RW 3] The source that is associated with arbitration element 4. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~tsem_registers_arb_element0.arb_element0 + and ~tsem_registers_arb_element1.arb_element1 and + ~tsem_registers_arb_element2.arb_element2 and + ~tsem_registers_arb_element3.arb_element3 */ +#define TSEM_REG_ARB_ELEMENT4 0x180030 +#define TSEM_REG_ENABLE_IN 0x1800a4 +#define TSEM_REG_ENABLE_OUT 0x1800a8 +/* [RW 32] This address space contains all registers and memories that are + placed in SEM_FAST block. The SEM_FAST registers are described in + appendix B. In order to access the SEM_FAST registers the base address + TSEM_REGISTERS_FAST_MEMORY (Offset: 0x1a0000) should be added to each + SEM_FAST register offset. */ +#define TSEM_REG_FAST_MEMORY 0x1a0000 +/* [RW 1] Disables input messages from FIC0 May be updated during run_time + by the microcode */ +#define TSEM_REG_FIC0_DISABLE 0x180224 +/* [RW 1] Disables input messages from FIC1 May be updated during run_time + by the microcode */ +#define TSEM_REG_FIC1_DISABLE 0x180234 +/* [RW 15] Interrupt table Read and write access to it is not possible in + the middle of the work */ +#define TSEM_REG_INT_TABLE 0x180400 +/* [ST 24] Statistics register. The number of messages that entered through + FIC0 */ +#define TSEM_REG_MSG_NUM_FIC0 0x180000 +/* [ST 24] Statistics register. The number of messages that entered through + FIC1 */ +#define TSEM_REG_MSG_NUM_FIC1 0x180004 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC0 */ +#define TSEM_REG_MSG_NUM_FOC0 0x180008 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC1 */ +#define TSEM_REG_MSG_NUM_FOC1 0x18000c +/* [ST 24] Statistics register. The number of messages that were sent to + FOC2 */ +#define TSEM_REG_MSG_NUM_FOC2 0x180010 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC3 */ +#define TSEM_REG_MSG_NUM_FOC3 0x180014 +/* [RW 1] Disables input messages from the passive buffer May be updated + during run_time by the microcode */ +#define TSEM_REG_PAS_DISABLE 0x18024c +/* [WB 128] Debug only. Passive buffer memory */ +#define TSEM_REG_PASSIVE_BUFFER 0x181000 +/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */ +#define TSEM_REG_PRAM 0x1c0000 +/* [R 8] Valid sleeping threads indication have bit per thread */ +#define TSEM_REG_SLEEP_THREADS_VALID 0x18026c +/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */ +#define TSEM_REG_SLOW_EXT_STORE_EMPTY 0x1802a0 +/* [RW 8] List of free threads . There is a bit per thread. */ +#define TSEM_REG_THREADS_LIST 0x1802e4 +/* [RW 3] The arbitration scheme of time_slot 0 */ +#define TSEM_REG_TS_0_AS 0x180038 +/* [RW 3] The arbitration scheme of time_slot 10 */ +#define TSEM_REG_TS_10_AS 0x180060 +/* [RW 3] The arbitration scheme of time_slot 11 */ +#define TSEM_REG_TS_11_AS 0x180064 +/* [RW 3] The arbitration scheme of time_slot 12 */ +#define TSEM_REG_TS_12_AS 0x180068 +/* [RW 3] The arbitration scheme of time_slot 13 */ +#define TSEM_REG_TS_13_AS 0x18006c +/* [RW 3] The arbitration scheme of time_slot 14 */ +#define TSEM_REG_TS_14_AS 0x180070 +/* [RW 3] The arbitration scheme of time_slot 15 */ +#define TSEM_REG_TS_15_AS 0x180074 +/* [RW 3] The arbitration scheme of time_slot 16 */ +#define TSEM_REG_TS_16_AS 0x180078 +/* [RW 3] The arbitration scheme of time_slot 17 */ +#define TSEM_REG_TS_17_AS 0x18007c +/* [RW 3] The arbitration scheme of time_slot 18 */ +#define TSEM_REG_TS_18_AS 0x180080 +/* [RW 3] The arbitration scheme of time_slot 1 */ +#define TSEM_REG_TS_1_AS 0x18003c +/* [RW 3] The arbitration scheme of time_slot 2 */ +#define TSEM_REG_TS_2_AS 0x180040 +/* [RW 3] The arbitration scheme of time_slot 3 */ +#define TSEM_REG_TS_3_AS 0x180044 +/* [RW 3] The arbitration scheme of time_slot 4 */ +#define TSEM_REG_TS_4_AS 0x180048 +/* [RW 3] The arbitration scheme of time_slot 5 */ +#define TSEM_REG_TS_5_AS 0x18004c +/* [RW 3] The arbitration scheme of time_slot 6 */ +#define TSEM_REG_TS_6_AS 0x180050 +/* [RW 3] The arbitration scheme of time_slot 7 */ +#define TSEM_REG_TS_7_AS 0x180054 +/* [RW 3] The arbitration scheme of time_slot 8 */ +#define TSEM_REG_TS_8_AS 0x180058 +/* [RW 3] The arbitration scheme of time_slot 9 */ +#define TSEM_REG_TS_9_AS 0x18005c +/* [RW 32] Interrupt mask register #0 read/write */ +#define TSEM_REG_TSEM_INT_MASK_0 0x180100 +#define TSEM_REG_TSEM_INT_MASK_1 0x180110 +/* [RW 32] Parity mask register #0 read/write */ +#define TSEM_REG_TSEM_PRTY_MASK_0 0x180120 +#define TSEM_REG_TSEM_PRTY_MASK_1 0x180130 +/* [R 5] Used to read the XX protection CAM occupancy counter. */ +#define UCM_REG_CAM_OCCUP 0xe0170 +/* [RW 1] CDU AG read Interface enable. If 0 - the request input is + disregarded; valid output is deasserted; all other signals are treated as + usual; if 1 - normal activity. */ +#define UCM_REG_CDU_AG_RD_IFEN 0xe0038 +/* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input + are disregarded; all other signals are treated as usual; if 1 - normal + activity. */ +#define UCM_REG_CDU_AG_WR_IFEN 0xe0034 +/* [RW 1] CDU STORM read Interface enable. If 0 - the request input is + disregarded; valid output is deasserted; all other signals are treated as + usual; if 1 - normal activity. */ +#define UCM_REG_CDU_SM_RD_IFEN 0xe0040 +/* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid + input is disregarded; all other signals are treated as usual; if 1 - + normal activity. */ +#define UCM_REG_CDU_SM_WR_IFEN 0xe003c +/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes + the initial credit value; read returns the current value of the credit + counter. Must be initialized to 1 at start-up. */ +#define UCM_REG_CFC_INIT_CRD 0xe0204 +/* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_CP_WEIGHT 0xe00c4 +/* [RW 1] Input csem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define UCM_REG_CSEM_IFEN 0xe0028 +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the csem interface is detected. */ +#define UCM_REG_CSEM_LENGTH_MIS 0xe0160 +/* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_CSEM_WEIGHT 0xe00b8 +/* [RW 1] Input dorq Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define UCM_REG_DORQ_IFEN 0xe0030 +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the dorq interface is detected. */ +#define UCM_REG_DORQ_LENGTH_MIS 0xe0168 +/* [RW 8] The Event ID in case ErrorFlg input message bit is set. */ +#define UCM_REG_ERR_EVNT_ID 0xe00a4 +/* [RW 28] The CM erroneous header for QM and Timers formatting. */ +#define UCM_REG_ERR_UCM_HDR 0xe00a0 +/* [RW 8] The Event ID for Timers expiration. */ +#define UCM_REG_EXPR_EVNT_ID 0xe00a8 +/* [RW 8] FIC0 output initial credit. Max credit available - 255.Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 64 at start-up. */ +#define UCM_REG_FIC0_INIT_CRD 0xe020c +/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 64 at start-up. */ +#define UCM_REG_FIC1_INIT_CRD 0xe0210 +/* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1 + - strict priority defined by ~ucm_registers_gr_ag_pr.gr_ag_pr; + ~ucm_registers_gr_ld0_pr.gr_ld0_pr and + ~ucm_registers_gr_ld1_pr.gr_ld1_pr. */ +#define UCM_REG_GR_ARB_TYPE 0xe0144 +/* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the + highest priority is 3. It is supposed that the Store channel group is + compliment to the others. */ +#define UCM_REG_GR_LD0_PR 0xe014c +/* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the + highest priority is 3. It is supposed that the Store channel group is + compliment to the others. */ +#define UCM_REG_GR_LD1_PR 0xe0150 +/* [RW 2] The queue index for invalidate counter flag decision. */ +#define UCM_REG_INV_CFLG_Q 0xe00e4 +/* [RW 5] The number of double REG-pairs; loaded from the STORM context and + sent to STORM; for a specific connection type. the double REG-pairs are + used in order to align to STORM context row size of 128 bits. The offset + of these data in the STORM context is always 0. Index _i stands for the + connection type (one of 16). */ +#define UCM_REG_N_SM_CTX_LD_0 0xe0054 +#define UCM_REG_N_SM_CTX_LD_1 0xe0058 +#define UCM_REG_N_SM_CTX_LD_10 0xe007c +#define UCM_REG_N_SM_CTX_LD_11 0xe0080 +#define UCM_REG_N_SM_CTX_LD_12 0xe0084 +#define UCM_REG_N_SM_CTX_LD_13 0xe0088 +#define UCM_REG_N_SM_CTX_LD_14 0xe008c +#define UCM_REG_N_SM_CTX_LD_15 0xe0090 +#define UCM_REG_N_SM_CTX_LD_2 0xe005c +#define UCM_REG_N_SM_CTX_LD_3 0xe0060 +#define UCM_REG_N_SM_CTX_LD_4 0xe0064 +/* [RW 6] The physical queue number 0 per port index (CID[23]) */ +#define UCM_REG_PHYS_QNUM0_0 0xe0110 +#define UCM_REG_PHYS_QNUM0_1 0xe0114 +/* [RW 6] The physical queue number 1 per port index (CID[23]) */ +#define UCM_REG_PHYS_QNUM1_0 0xe0118 +#define UCM_REG_PHYS_QNUM1_1 0xe011c +/* [RW 8] The Event ID for Timers formatting in case of stop done. */ +#define UCM_REG_STOP_EVNT_ID 0xe00ac +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the STORM interface is detected. */ +#define UCM_REG_STORM_LENGTH_MIS 0xe0154 +/* [RW 1] STORM - CM Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define UCM_REG_STORM_UCM_IFEN 0xe0010 +/* [RW 4] Timers output initial credit. Max credit available - 15.Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 4 at start-up. */ +#define UCM_REG_TM_INIT_CRD 0xe021c +/* [RW 28] The CM header for Timers expiration command. */ +#define UCM_REG_TM_UCM_HDR 0xe009c +/* [RW 1] Timers - CM Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define UCM_REG_TM_UCM_IFEN 0xe001c +/* [RW 1] Input tsem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define UCM_REG_TSEM_IFEN 0xe0024 +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the tsem interface is detected. */ +#define UCM_REG_TSEM_LENGTH_MIS 0xe015c +/* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_TSEM_WEIGHT 0xe00b4 +/* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define UCM_REG_UCM_CFC_IFEN 0xe0044 +/* [RW 11] Interrupt mask register #0 read/write */ +#define UCM_REG_UCM_INT_MASK 0xe01d4 +/* [R 11] Interrupt register #0 read */ +#define UCM_REG_UCM_INT_STS 0xe01c8 +/* [RW 2] The size of AG context region 0 in REG-pairs. Designates the MS + REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5). + Is used to determine the number of the AG context REG-pairs written back; + when the Reg1WbFlg isn't set. */ +#define UCM_REG_UCM_REG0_SZ 0xe00dc +/* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define UCM_REG_UCM_STORM0_IFEN 0xe0004 +/* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define UCM_REG_UCM_STORM1_IFEN 0xe0008 +/* [RW 1] CM - Timers Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define UCM_REG_UCM_TM_IFEN 0xe0020 +/* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define UCM_REG_UCM_UQM_IFEN 0xe000c +/* [RW 1] If set the Q index; received from the QM is inserted to event ID. */ +#define UCM_REG_UCM_UQM_USE_Q 0xe00d8 +/* [RW 6] QM output initial credit. Max credit available - 32.Write writes + the initial credit value; read returns the current value of the credit + counter. Must be initialized to 32 at start-up. */ +#define UCM_REG_UQM_INIT_CRD 0xe0220 +/* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0 + stands for weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define UCM_REG_UQM_P_WEIGHT 0xe00cc +/* [RW 28] The CM header value for QM request (primary). */ +#define UCM_REG_UQM_UCM_HDR_P 0xe0094 +/* [RW 28] The CM header value for QM request (secondary). */ +#define UCM_REG_UQM_UCM_HDR_S 0xe0098 +/* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define UCM_REG_UQM_UCM_IFEN 0xe0014 +/* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define UCM_REG_USDM_IFEN 0xe0018 +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the SDM interface is detected. */ +#define UCM_REG_USDM_LENGTH_MIS 0xe0158 +/* [RW 1] Input xsem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define UCM_REG_XSEM_IFEN 0xe002c +/* [RC 1] Set when the message length mismatch (relative to last indication) + at the xsem interface isdetected. */ +#define UCM_REG_XSEM_LENGTH_MIS 0xe0164 +/* [RW 20] Indirect access to the descriptor table of the XX protection + mechanism. The fields are:[5:0] - message length; 14:6] - message + pointer; 19:15] - next pointer. */ +#define UCM_REG_XX_DESCR_TABLE 0xe0280 +/* [R 6] Use to read the XX protection Free counter. */ +#define UCM_REG_XX_FREE 0xe016c +/* [RW 6] Initial value for the credit counter; responsible for fulfilling + of the Input Stage XX protection buffer by the XX protection pending + messages. Write writes the initial credit value; read returns the current + value of the credit counter. Must be initialized to 12 at start-up. */ +#define UCM_REG_XX_INIT_CRD 0xe0224 +/* [RW 6] The maximum number of pending messages; which may be stored in XX + protection. ~ucm_registers_xx_free.xx_free read on read. */ +#define UCM_REG_XX_MSG_NUM 0xe0228 +/* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */ +#define UCM_REG_XX_OVFL_EVNT_ID 0xe004c +/* [RW 16] Indirect access to the XX table of the XX protection mechanism. + The fields are: [4:0] - tail pointer; 10:5] - Link List size; 15:11] - + header pointer. */ +#define UCM_REG_XX_TABLE 0xe0300 +/* [RW 8] The event id for aggregated interrupt 0 */ +#define USDM_REG_AGG_INT_EVENT_0 0xc4038 +#define USDM_REG_AGG_INT_EVENT_1 0xc403c +#define USDM_REG_AGG_INT_EVENT_10 0xc4060 +#define USDM_REG_AGG_INT_EVENT_11 0xc4064 +#define USDM_REG_AGG_INT_EVENT_12 0xc4068 +#define USDM_REG_AGG_INT_EVENT_13 0xc406c +#define USDM_REG_AGG_INT_EVENT_14 0xc4070 +#define USDM_REG_AGG_INT_EVENT_15 0xc4074 +#define USDM_REG_AGG_INT_EVENT_16 0xc4078 +#define USDM_REG_AGG_INT_EVENT_17 0xc407c +#define USDM_REG_AGG_INT_EVENT_18 0xc4080 +#define USDM_REG_AGG_INT_EVENT_19 0xc4084 +/* [RW 1] For each aggregated interrupt index whether the mode is normal (0) + or auto-mask-mode (1) */ +#define USDM_REG_AGG_INT_MODE_0 0xc41b8 +#define USDM_REG_AGG_INT_MODE_1 0xc41bc +#define USDM_REG_AGG_INT_MODE_10 0xc41e0 +#define USDM_REG_AGG_INT_MODE_11 0xc41e4 +#define USDM_REG_AGG_INT_MODE_12 0xc41e8 +#define USDM_REG_AGG_INT_MODE_13 0xc41ec +#define USDM_REG_AGG_INT_MODE_14 0xc41f0 +#define USDM_REG_AGG_INT_MODE_15 0xc41f4 +#define USDM_REG_AGG_INT_MODE_16 0xc41f8 +#define USDM_REG_AGG_INT_MODE_17 0xc41fc +#define USDM_REG_AGG_INT_MODE_18 0xc4200 +#define USDM_REG_AGG_INT_MODE_19 0xc4204 +/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */ +#define USDM_REG_CFC_RSP_START_ADDR 0xc4008 +/* [RW 16] The maximum value of the competion counter #0 */ +#define USDM_REG_CMP_COUNTER_MAX0 0xc401c +/* [RW 16] The maximum value of the competion counter #1 */ +#define USDM_REG_CMP_COUNTER_MAX1 0xc4020 +/* [RW 16] The maximum value of the competion counter #2 */ +#define USDM_REG_CMP_COUNTER_MAX2 0xc4024 +/* [RW 16] The maximum value of the competion counter #3 */ +#define USDM_REG_CMP_COUNTER_MAX3 0xc4028 +/* [RW 13] The start address in the internal RAM for the completion + counters. */ +#define USDM_REG_CMP_COUNTER_START_ADDR 0xc400c +#define USDM_REG_ENABLE_IN1 0xc4238 +#define USDM_REG_ENABLE_IN2 0xc423c +#define USDM_REG_ENABLE_OUT1 0xc4240 +#define USDM_REG_ENABLE_OUT2 0xc4244 +/* [RW 4] The initial number of messages that can be sent to the pxp control + interface without receiving any ACK. */ +#define USDM_REG_INIT_CREDIT_PXP_CTRL 0xc44c0 +/* [ST 32] The number of ACK after placement messages received */ +#define USDM_REG_NUM_OF_ACK_AFTER_PLACE 0xc4280 +/* [ST 32] The number of packet end messages received from the parser */ +#define USDM_REG_NUM_OF_PKT_END_MSG 0xc4278 +/* [ST 32] The number of requests received from the pxp async if */ +#define USDM_REG_NUM_OF_PXP_ASYNC_REQ 0xc427c +/* [ST 32] The number of commands received in queue 0 */ +#define USDM_REG_NUM_OF_Q0_CMD 0xc4248 +/* [ST 32] The number of commands received in queue 10 */ +#define USDM_REG_NUM_OF_Q10_CMD 0xc4270 +/* [ST 32] The number of commands received in queue 11 */ +#define USDM_REG_NUM_OF_Q11_CMD 0xc4274 +/* [ST 32] The number of commands received in queue 1 */ +#define USDM_REG_NUM_OF_Q1_CMD 0xc424c +/* [ST 32] The number of commands received in queue 2 */ +#define USDM_REG_NUM_OF_Q2_CMD 0xc4250 +/* [ST 32] The number of commands received in queue 3 */ +#define USDM_REG_NUM_OF_Q3_CMD 0xc4254 +/* [ST 32] The number of commands received in queue 4 */ +#define USDM_REG_NUM_OF_Q4_CMD 0xc4258 +/* [ST 32] The number of commands received in queue 5 */ +#define USDM_REG_NUM_OF_Q5_CMD 0xc425c +/* [ST 32] The number of commands received in queue 6 */ +#define USDM_REG_NUM_OF_Q6_CMD 0xc4260 +/* [ST 32] The number of commands received in queue 7 */ +#define USDM_REG_NUM_OF_Q7_CMD 0xc4264 +/* [ST 32] The number of commands received in queue 8 */ +#define USDM_REG_NUM_OF_Q8_CMD 0xc4268 +/* [ST 32] The number of commands received in queue 9 */ +#define USDM_REG_NUM_OF_Q9_CMD 0xc426c +/* [RW 13] The start address in the internal RAM for the packet end message */ +#define USDM_REG_PCK_END_MSG_START_ADDR 0xc4014 +/* [RW 13] The start address in the internal RAM for queue counters */ +#define USDM_REG_Q_COUNTER_START_ADDR 0xc4010 +/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */ +#define USDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0xc4550 +/* [R 1] parser fifo empty in sdm_sync block */ +#define USDM_REG_SYNC_PARSER_EMPTY 0xc4558 +/* [R 1] parser serial fifo empty in sdm_sync block */ +#define USDM_REG_SYNC_SYNC_EMPTY 0xc4560 +/* [RW 32] Tick for timer counter. Applicable only when + ~usdm_registers_timer_tick_enable.timer_tick_enable =1 */ +#define USDM_REG_TIMER_TICK 0xc4000 +/* [RW 32] Interrupt mask register #0 read/write */ +#define USDM_REG_USDM_INT_MASK_0 0xc42a0 +#define USDM_REG_USDM_INT_MASK_1 0xc42b0 +/* [RW 11] Parity mask register #0 read/write */ +#define USDM_REG_USDM_PRTY_MASK 0xc42c0 +/* [RW 5] The number of time_slots in the arbitration cycle */ +#define USEM_REG_ARB_CYCLE_SIZE 0x300034 +/* [RW 3] The source that is associated with arbitration element 0. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2 */ +#define USEM_REG_ARB_ELEMENT0 0x300020 +/* [RW 3] The source that is associated with arbitration element 1. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~usem_registers_arb_element0.arb_element0 */ +#define USEM_REG_ARB_ELEMENT1 0x300024 +/* [RW 3] The source that is associated with arbitration element 2. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~usem_registers_arb_element0.arb_element0 + and ~usem_registers_arb_element1.arb_element1 */ +#define USEM_REG_ARB_ELEMENT2 0x300028 +/* [RW 3] The source that is associated with arbitration element 3. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2.Could + not be equal to register ~usem_registers_arb_element0.arb_element0 and + ~usem_registers_arb_element1.arb_element1 and + ~usem_registers_arb_element2.arb_element2 */ +#define USEM_REG_ARB_ELEMENT3 0x30002c +/* [RW 3] The source that is associated with arbitration element 4. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~usem_registers_arb_element0.arb_element0 + and ~usem_registers_arb_element1.arb_element1 and + ~usem_registers_arb_element2.arb_element2 and + ~usem_registers_arb_element3.arb_element3 */ +#define USEM_REG_ARB_ELEMENT4 0x300030 +#define USEM_REG_ENABLE_IN 0x3000a4 +#define USEM_REG_ENABLE_OUT 0x3000a8 +/* [RW 32] This address space contains all registers and memories that are + placed in SEM_FAST block. The SEM_FAST registers are described in + appendix B. In order to access the SEM_FAST registers... the base address + USEM_REGISTERS_FAST_MEMORY (Offset: 0x320000) should be added to each + SEM_FAST register offset. */ +#define USEM_REG_FAST_MEMORY 0x320000 +/* [RW 1] Disables input messages from FIC0 May be updated during run_time + by the microcode */ +#define USEM_REG_FIC0_DISABLE 0x300224 +/* [RW 1] Disables input messages from FIC1 May be updated during run_time + by the microcode */ +#define USEM_REG_FIC1_DISABLE 0x300234 +/* [RW 15] Interrupt table Read and write access to it is not possible in + the middle of the work */ +#define USEM_REG_INT_TABLE 0x300400 +/* [ST 24] Statistics register. The number of messages that entered through + FIC0 */ +#define USEM_REG_MSG_NUM_FIC0 0x300000 +/* [ST 24] Statistics register. The number of messages that entered through + FIC1 */ +#define USEM_REG_MSG_NUM_FIC1 0x300004 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC0 */ +#define USEM_REG_MSG_NUM_FOC0 0x300008 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC1 */ +#define USEM_REG_MSG_NUM_FOC1 0x30000c +/* [ST 24] Statistics register. The number of messages that were sent to + FOC2 */ +#define USEM_REG_MSG_NUM_FOC2 0x300010 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC3 */ +#define USEM_REG_MSG_NUM_FOC3 0x300014 +/* [RW 1] Disables input messages from the passive buffer May be updated + during run_time by the microcode */ +#define USEM_REG_PAS_DISABLE 0x30024c +/* [WB 128] Debug only. Passive buffer memory */ +#define USEM_REG_PASSIVE_BUFFER 0x302000 +/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */ +#define USEM_REG_PRAM 0x340000 +/* [R 16] Valid sleeping threads indication have bit per thread */ +#define USEM_REG_SLEEP_THREADS_VALID 0x30026c +/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */ +#define USEM_REG_SLOW_EXT_STORE_EMPTY 0x3002a0 +/* [RW 16] List of free threads . There is a bit per thread. */ +#define USEM_REG_THREADS_LIST 0x3002e4 +/* [RW 3] The arbitration scheme of time_slot 0 */ +#define USEM_REG_TS_0_AS 0x300038 +/* [RW 3] The arbitration scheme of time_slot 10 */ +#define USEM_REG_TS_10_AS 0x300060 +/* [RW 3] The arbitration scheme of time_slot 11 */ +#define USEM_REG_TS_11_AS 0x300064 +/* [RW 3] The arbitration scheme of time_slot 12 */ +#define USEM_REG_TS_12_AS 0x300068 +/* [RW 3] The arbitration scheme of time_slot 13 */ +#define USEM_REG_TS_13_AS 0x30006c +/* [RW 3] The arbitration scheme of time_slot 14 */ +#define USEM_REG_TS_14_AS 0x300070 +/* [RW 3] The arbitration scheme of time_slot 15 */ +#define USEM_REG_TS_15_AS 0x300074 +/* [RW 3] The arbitration scheme of time_slot 16 */ +#define USEM_REG_TS_16_AS 0x300078 +/* [RW 3] The arbitration scheme of time_slot 17 */ +#define USEM_REG_TS_17_AS 0x30007c +/* [RW 3] The arbitration scheme of time_slot 18 */ +#define USEM_REG_TS_18_AS 0x300080 +/* [RW 3] The arbitration scheme of time_slot 1 */ +#define USEM_REG_TS_1_AS 0x30003c +/* [RW 3] The arbitration scheme of time_slot 2 */ +#define USEM_REG_TS_2_AS 0x300040 +/* [RW 3] The arbitration scheme of time_slot 3 */ +#define USEM_REG_TS_3_AS 0x300044 +/* [RW 3] The arbitration scheme of time_slot 4 */ +#define USEM_REG_TS_4_AS 0x300048 +/* [RW 3] The arbitration scheme of time_slot 5 */ +#define USEM_REG_TS_5_AS 0x30004c +/* [RW 3] The arbitration scheme of time_slot 6 */ +#define USEM_REG_TS_6_AS 0x300050 +/* [RW 3] The arbitration scheme of time_slot 7 */ +#define USEM_REG_TS_7_AS 0x300054 +/* [RW 3] The arbitration scheme of time_slot 8 */ +#define USEM_REG_TS_8_AS 0x300058 +/* [RW 3] The arbitration scheme of time_slot 9 */ +#define USEM_REG_TS_9_AS 0x30005c +/* [RW 32] Interrupt mask register #0 read/write */ +#define USEM_REG_USEM_INT_MASK_0 0x300110 +#define USEM_REG_USEM_INT_MASK_1 0x300120 +/* [RW 32] Parity mask register #0 read/write */ +#define USEM_REG_USEM_PRTY_MASK_0 0x300130 +#define USEM_REG_USEM_PRTY_MASK_1 0x300140 +/* [RW 2] The queue index for registration on Aux1 counter flag. */ +#define XCM_REG_AUX1_Q 0x20134 +/* [RW 2] Per each decision rule the queue index to register to. */ +#define XCM_REG_AUX_CNT_FLG_Q_19 0x201b0 +/* [R 5] Used to read the XX protection CAM occupancy counter. */ +#define XCM_REG_CAM_OCCUP 0x20244 +/* [RW 1] CDU AG read Interface enable. If 0 - the request input is + disregarded; valid output is deasserted; all other signals are treated as + usual; if 1 - normal activity. */ +#define XCM_REG_CDU_AG_RD_IFEN 0x20044 +/* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input + are disregarded; all other signals are treated as usual; if 1 - normal + activity. */ +#define XCM_REG_CDU_AG_WR_IFEN 0x20040 +/* [RW 1] CDU STORM read Interface enable. If 0 - the request input is + disregarded; valid output is deasserted; all other signals are treated as + usual; if 1 - normal activity. */ +#define XCM_REG_CDU_SM_RD_IFEN 0x2004c +/* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid + input is disregarded; all other signals are treated as usual; if 1 - + normal activity. */ +#define XCM_REG_CDU_SM_WR_IFEN 0x20048 +/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes + the initial credit value; read returns the current value of the credit + counter. Must be initialized to 1 at start-up. */ +#define XCM_REG_CFC_INIT_CRD 0x20404 +/* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_CP_WEIGHT 0x200dc +/* [RW 1] Input csem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define XCM_REG_CSEM_IFEN 0x20028 +/* [RC 1] Set at message length mismatch (relative to last indication) at + the csem interface. */ +#define XCM_REG_CSEM_LENGTH_MIS 0x20228 +/* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_CSEM_WEIGHT 0x200c4 +/* [RW 1] Input dorq Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define XCM_REG_DORQ_IFEN 0x20030 +/* [RC 1] Set at message length mismatch (relative to last indication) at + the dorq interface. */ +#define XCM_REG_DORQ_LENGTH_MIS 0x20230 +/* [RW 8] The Event ID in case the ErrorFlg input message bit is set. */ +#define XCM_REG_ERR_EVNT_ID 0x200b0 +/* [RW 28] The CM erroneous header for QM and Timers formatting. */ +#define XCM_REG_ERR_XCM_HDR 0x200ac +/* [RW 8] The Event ID for Timers expiration. */ +#define XCM_REG_EXPR_EVNT_ID 0x200b4 +/* [RW 8] FIC0 output initial credit. Max credit available - 255.Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 64 at start-up. */ +#define XCM_REG_FIC0_INIT_CRD 0x2040c +/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 64 at start-up. */ +#define XCM_REG_FIC1_INIT_CRD 0x20410 +/* [RW 8] The maximum delayed ACK counter value.Must be at least 2. Per port + value. */ +#define XCM_REG_GLB_DEL_ACK_MAX_CNT_0 0x20118 +#define XCM_REG_GLB_DEL_ACK_MAX_CNT_1 0x2011c +/* [RW 28] The delayed ACK timeout in ticks. Per port value. */ +#define XCM_REG_GLB_DEL_ACK_TMR_VAL_0 0x20108 +#define XCM_REG_GLB_DEL_ACK_TMR_VAL_1 0x2010c +/* [RW 1] Arbitratiojn between Input Arbiter groups: 0 - fair Round-Robin; 1 + - strict priority defined by ~xcm_registers_gr_ag_pr.gr_ag_pr; + ~xcm_registers_gr_ld0_pr.gr_ld0_pr and + ~xcm_registers_gr_ld1_pr.gr_ld1_pr. */ +#define XCM_REG_GR_ARB_TYPE 0x2020c +/* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the + highest priority is 3. It is supposed that the Channel group is the + compliment of the other 3 groups. */ +#define XCM_REG_GR_LD0_PR 0x20214 +/* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the + highest priority is 3. It is supposed that the Channel group is the + compliment of the other 3 groups. */ +#define XCM_REG_GR_LD1_PR 0x20218 +/* [RW 1] Input nig0 Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define XCM_REG_NIG0_IFEN 0x20038 +/* [RC 1] Set at message length mismatch (relative to last indication) at + the nig0 interface. */ +#define XCM_REG_NIG0_LENGTH_MIS 0x20238 +/* [RW 1] Input nig1 Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define XCM_REG_NIG1_IFEN 0x2003c +/* [RC 1] Set at message length mismatch (relative to last indication) at + the nig1 interface. */ +#define XCM_REG_NIG1_LENGTH_MIS 0x2023c +/* [RW 3] The weight of the input nig1 in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_NIG1_WEIGHT 0x200d8 +/* [RW 5] The number of double REG-pairs; loaded from the STORM context and + sent to STORM; for a specific connection type. The double REG-pairs are + used in order to align to STORM context row size of 128 bits. The offset + of these data in the STORM context is always 0. Index _i stands for the + connection type (one of 16). */ +#define XCM_REG_N_SM_CTX_LD_0 0x20060 +#define XCM_REG_N_SM_CTX_LD_1 0x20064 +#define XCM_REG_N_SM_CTX_LD_10 0x20088 +#define XCM_REG_N_SM_CTX_LD_11 0x2008c +#define XCM_REG_N_SM_CTX_LD_12 0x20090 +#define XCM_REG_N_SM_CTX_LD_13 0x20094 +#define XCM_REG_N_SM_CTX_LD_14 0x20098 +#define XCM_REG_N_SM_CTX_LD_15 0x2009c +#define XCM_REG_N_SM_CTX_LD_2 0x20068 +#define XCM_REG_N_SM_CTX_LD_3 0x2006c +#define XCM_REG_N_SM_CTX_LD_4 0x20070 +/* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define XCM_REG_PBF_IFEN 0x20034 +/* [RC 1] Set at message length mismatch (relative to last indication) at + the pbf interface. */ +#define XCM_REG_PBF_LENGTH_MIS 0x20234 +/* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_PBF_WEIGHT 0x200d0 +/* [RW 8] The Event ID for Timers formatting in case of stop done. */ +#define XCM_REG_STOP_EVNT_ID 0x200b8 +/* [RC 1] Set at message length mismatch (relative to last indication) at + the STORM interface. */ +#define XCM_REG_STORM_LENGTH_MIS 0x2021c +/* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_STORM_WEIGHT 0x200bc +/* [RW 1] STORM - CM Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define XCM_REG_STORM_XCM_IFEN 0x20010 +/* [RW 4] Timers output initial credit. Max credit available - 15.Write + writes the initial credit value; read returns the current value of the + credit counter. Must be initialized to 4 at start-up. */ +#define XCM_REG_TM_INIT_CRD 0x2041c +/* [RW 28] The CM header for Timers expiration command. */ +#define XCM_REG_TM_XCM_HDR 0x200a8 +/* [RW 1] Timers - CM Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define XCM_REG_TM_XCM_IFEN 0x2001c +/* [RW 1] Input tsem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define XCM_REG_TSEM_IFEN 0x20024 +/* [RC 1] Set at message length mismatch (relative to last indication) at + the tsem interface. */ +#define XCM_REG_TSEM_LENGTH_MIS 0x20224 +/* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_TSEM_WEIGHT 0x200c0 +/* [RW 2] The queue index for registration on UNA greater NXT decision rule. */ +#define XCM_REG_UNA_GT_NXT_Q 0x20120 +/* [RW 1] Input usem Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define XCM_REG_USEM_IFEN 0x2002c +/* [RC 1] Message length mismatch (relative to last indication) at the usem + interface. */ +#define XCM_REG_USEM_LENGTH_MIS 0x2022c +/* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_USEM_WEIGHT 0x200c8 +/* [RW 2] DA counter command; used in case of window update doorbell.The + first index stands for the value DaEnable of that connection. The second + index stands for port number. */ +#define XCM_REG_WU_DA_CNT_CMD00 0x201d4 +/* [RW 2] DA counter command; used in case of window update doorbell.The + first index stands for the value DaEnable of that connection. The second + index stands for port number. */ +#define XCM_REG_WU_DA_CNT_CMD01 0x201d8 +/* [RW 2] DA counter command; used in case of window update doorbell.The + first index stands for the value DaEnable of that connection. The second + index stands for port number. */ +#define XCM_REG_WU_DA_CNT_CMD10 0x201dc +/* [RW 2] DA counter command; used in case of window update doorbell.The + first index stands for the value DaEnable of that connection. The second + index stands for port number. */ +#define XCM_REG_WU_DA_CNT_CMD11 0x201e0 +/* [RW 8] DA counter update value used in case of window update doorbell.The + first index stands for the value DaEnable of that connection. The second + index stands for port number. */ +#define XCM_REG_WU_DA_CNT_UPD_VAL00 0x201e4 +/* [RW 8] DA counter update value; used in case of window update + doorbell.The first index stands for the value DaEnable of that + connection. The second index stands for port number. */ +#define XCM_REG_WU_DA_CNT_UPD_VAL01 0x201e8 +/* [RW 8] DA counter update value; used in case of window update + doorbell.The first index stands for the value DaEnable of that + connection. The second index stands for port number. */ +#define XCM_REG_WU_DA_CNT_UPD_VAL10 0x201ec +/* [RW 8] DA counter update value; used in case of window update + doorbell.The first index stands for the value DaEnable of that + connection. The second index stands for port number. */ +#define XCM_REG_WU_DA_CNT_UPD_VAL11 0x201f0 +/* [RW 1] DA timer command; used in case of window update doorbell.The first + index stands for the value DaEnable of that connection. The second index + stands for port number. */ +#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00 0x201c4 +/* [RW 1] DA timer command; used in case of window update doorbell.The first + index stands for the value DaEnable of that connection. The second index + stands for port number. */ +#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01 0x201c8 +/* [RW 1] DA timer command; used in case of window update doorbell.The first + index stands for the value DaEnable of that connection. The second index + stands for port number. */ +#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD10 0x201cc +/* [RW 1] DA timer command; used in case of window update doorbell.The first + index stands for the value DaEnable of that connection. The second index + stands for port number. */ +#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD11 0x201d0 +/* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define XCM_REG_XCM_CFC_IFEN 0x20050 +/* [RW 14] Interrupt mask register #0 read/write */ +#define XCM_REG_XCM_INT_MASK 0x202b4 +/* [R 14] Interrupt register #0 read */ +#define XCM_REG_XCM_INT_STS 0x202a8 +/* [RW 4] The size of AG context region 0 in REG-pairs. Designates the MS + REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5). + Is used to determine the number of the AG context REG-pairs written back; + when the Reg1WbFlg isn't set. */ +#define XCM_REG_XCM_REG0_SZ 0x200f4 +/* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define XCM_REG_XCM_STORM0_IFEN 0x20004 +/* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define XCM_REG_XCM_STORM1_IFEN 0x20008 +/* [RW 1] CM - Timers Interface enable. If 0 - the valid input is + disregarded; acknowledge output is deasserted; all other signals are + treated as usual; if 1 - normal activity. */ +#define XCM_REG_XCM_TM_IFEN 0x20020 +/* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is + disregarded; valid is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define XCM_REG_XCM_XQM_IFEN 0x2000c +/* [RW 1] If set the Q index; received from the QM is inserted to event ID. */ +#define XCM_REG_XCM_XQM_USE_Q 0x200f0 +/* [RW 4] The value by which CFC updates the activity counter at QM bypass. */ +#define XCM_REG_XQM_BYP_ACT_UPD 0x200fc +/* [RW 6] QM output initial credit. Max credit available - 32.Write writes + the initial credit value; read returns the current value of the credit + counter. Must be initialized to 32 at start-up. */ +#define XCM_REG_XQM_INIT_CRD 0x20420 +/* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0 + stands for weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_XQM_P_WEIGHT 0x200e4 +/* [RW 28] The CM header value for QM request (primary). */ +#define XCM_REG_XQM_XCM_HDR_P 0x200a0 +/* [RW 28] The CM header value for QM request (secondary). */ +#define XCM_REG_XQM_XCM_HDR_S 0x200a4 +/* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define XCM_REG_XQM_XCM_IFEN 0x20014 +/* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded; + acknowledge output is deasserted; all other signals are treated as usual; + if 1 - normal activity. */ +#define XCM_REG_XSDM_IFEN 0x20018 +/* [RC 1] Set at message length mismatch (relative to last indication) at + the SDM interface. */ +#define XCM_REG_XSDM_LENGTH_MIS 0x20220 +/* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for + weight 8 (the most prioritised); 1 stands for weight 1(least + prioritised); 2 stands for weight 2; tc. */ +#define XCM_REG_XSDM_WEIGHT 0x200e0 +/* [RW 17] Indirect access to the descriptor table of the XX protection + mechanism. The fields are: [5:0] - message length; 11:6] - message + pointer; 16:12] - next pointer. */ +#define XCM_REG_XX_DESCR_TABLE 0x20480 +/* [R 6] Used to read the XX protection Free counter. */ +#define XCM_REG_XX_FREE 0x20240 +/* [RW 6] Initial value for the credit counter; responsible for fulfilling + of the Input Stage XX protection buffer by the XX protection pending + messages. Max credit available - 3.Write writes the initial credit value; + read returns the current value of the credit counter. Must be initialized + to 2 at start-up. */ +#define XCM_REG_XX_INIT_CRD 0x20424 +/* [RW 6] The maximum number of pending messages; which may be stored in XX + protection. ~xcm_registers_xx_free.xx_free read on read. */ +#define XCM_REG_XX_MSG_NUM 0x20428 +/* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */ +#define XCM_REG_XX_OVFL_EVNT_ID 0x20058 +/* [RW 15] Indirect access to the XX table of the XX protection mechanism. + The fields are:[4:0] - tail pointer; 9:5] - Link List size; 14:10] - + header pointer. */ +#define XCM_REG_XX_TABLE 0x20500 +/* [RW 8] The event id for aggregated interrupt 0 */ +#define XSDM_REG_AGG_INT_EVENT_0 0x166038 +#define XSDM_REG_AGG_INT_EVENT_1 0x16603c +#define XSDM_REG_AGG_INT_EVENT_10 0x166060 +#define XSDM_REG_AGG_INT_EVENT_11 0x166064 +#define XSDM_REG_AGG_INT_EVENT_12 0x166068 +#define XSDM_REG_AGG_INT_EVENT_13 0x16606c +#define XSDM_REG_AGG_INT_EVENT_14 0x166070 +#define XSDM_REG_AGG_INT_EVENT_15 0x166074 +#define XSDM_REG_AGG_INT_EVENT_16 0x166078 +#define XSDM_REG_AGG_INT_EVENT_17 0x16607c +#define XSDM_REG_AGG_INT_EVENT_18 0x166080 +#define XSDM_REG_AGG_INT_EVENT_19 0x166084 +#define XSDM_REG_AGG_INT_EVENT_2 0x166040 +#define XSDM_REG_AGG_INT_EVENT_20 0x166088 +#define XSDM_REG_AGG_INT_EVENT_21 0x16608c +#define XSDM_REG_AGG_INT_EVENT_22 0x166090 +#define XSDM_REG_AGG_INT_EVENT_23 0x166094 +#define XSDM_REG_AGG_INT_EVENT_24 0x166098 +#define XSDM_REG_AGG_INT_EVENT_25 0x16609c +#define XSDM_REG_AGG_INT_EVENT_26 0x1660a0 +#define XSDM_REG_AGG_INT_EVENT_27 0x1660a4 +#define XSDM_REG_AGG_INT_EVENT_28 0x1660a8 +#define XSDM_REG_AGG_INT_EVENT_29 0x1660ac +/* [RW 1] For each aggregated interrupt index whether the mode is normal (0) + or auto-mask-mode (1) */ +#define XSDM_REG_AGG_INT_MODE_0 0x1661b8 +#define XSDM_REG_AGG_INT_MODE_1 0x1661bc +#define XSDM_REG_AGG_INT_MODE_10 0x1661e0 +#define XSDM_REG_AGG_INT_MODE_11 0x1661e4 +#define XSDM_REG_AGG_INT_MODE_12 0x1661e8 +#define XSDM_REG_AGG_INT_MODE_13 0x1661ec +#define XSDM_REG_AGG_INT_MODE_14 0x1661f0 +#define XSDM_REG_AGG_INT_MODE_15 0x1661f4 +#define XSDM_REG_AGG_INT_MODE_16 0x1661f8 +#define XSDM_REG_AGG_INT_MODE_17 0x1661fc +#define XSDM_REG_AGG_INT_MODE_18 0x166200 +#define XSDM_REG_AGG_INT_MODE_19 0x166204 +/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */ +#define XSDM_REG_CFC_RSP_START_ADDR 0x166008 +/* [RW 16] The maximum value of the competion counter #0 */ +#define XSDM_REG_CMP_COUNTER_MAX0 0x16601c +/* [RW 16] The maximum value of the competion counter #1 */ +#define XSDM_REG_CMP_COUNTER_MAX1 0x166020 +/* [RW 16] The maximum value of the competion counter #2 */ +#define XSDM_REG_CMP_COUNTER_MAX2 0x166024 +/* [RW 16] The maximum value of the competion counter #3 */ +#define XSDM_REG_CMP_COUNTER_MAX3 0x166028 +/* [RW 13] The start address in the internal RAM for the completion + counters. */ +#define XSDM_REG_CMP_COUNTER_START_ADDR 0x16600c +#define XSDM_REG_ENABLE_IN1 0x166238 +#define XSDM_REG_ENABLE_IN2 0x16623c +#define XSDM_REG_ENABLE_OUT1 0x166240 +#define XSDM_REG_ENABLE_OUT2 0x166244 +/* [RW 4] The initial number of messages that can be sent to the pxp control + interface without receiving any ACK. */ +#define XSDM_REG_INIT_CREDIT_PXP_CTRL 0x1664bc +/* [ST 32] The number of ACK after placement messages received */ +#define XSDM_REG_NUM_OF_ACK_AFTER_PLACE 0x16627c +/* [ST 32] The number of packet end messages received from the parser */ +#define XSDM_REG_NUM_OF_PKT_END_MSG 0x166274 +/* [ST 32] The number of requests received from the pxp async if */ +#define XSDM_REG_NUM_OF_PXP_ASYNC_REQ 0x166278 +/* [ST 32] The number of commands received in queue 0 */ +#define XSDM_REG_NUM_OF_Q0_CMD 0x166248 +/* [ST 32] The number of commands received in queue 10 */ +#define XSDM_REG_NUM_OF_Q10_CMD 0x16626c +/* [ST 32] The number of commands received in queue 11 */ +#define XSDM_REG_NUM_OF_Q11_CMD 0x166270 +/* [ST 32] The number of commands received in queue 1 */ +#define XSDM_REG_NUM_OF_Q1_CMD 0x16624c +/* [ST 32] The number of commands received in queue 3 */ +#define XSDM_REG_NUM_OF_Q3_CMD 0x166250 +/* [ST 32] The number of commands received in queue 4 */ +#define XSDM_REG_NUM_OF_Q4_CMD 0x166254 +/* [ST 32] The number of commands received in queue 5 */ +#define XSDM_REG_NUM_OF_Q5_CMD 0x166258 +/* [ST 32] The number of commands received in queue 6 */ +#define XSDM_REG_NUM_OF_Q6_CMD 0x16625c +/* [ST 32] The number of commands received in queue 7 */ +#define XSDM_REG_NUM_OF_Q7_CMD 0x166260 +/* [ST 32] The number of commands received in queue 8 */ +#define XSDM_REG_NUM_OF_Q8_CMD 0x166264 +/* [ST 32] The number of commands received in queue 9 */ +#define XSDM_REG_NUM_OF_Q9_CMD 0x166268 +/* [RW 13] The start address in the internal RAM for queue counters */ +#define XSDM_REG_Q_COUNTER_START_ADDR 0x166010 +/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */ +#define XSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0x166548 +/* [R 1] parser fifo empty in sdm_sync block */ +#define XSDM_REG_SYNC_PARSER_EMPTY 0x166550 +/* [R 1] parser serial fifo empty in sdm_sync block */ +#define XSDM_REG_SYNC_SYNC_EMPTY 0x166558 +/* [RW 32] Tick for timer counter. Applicable only when + ~xsdm_registers_timer_tick_enable.timer_tick_enable =1 */ +#define XSDM_REG_TIMER_TICK 0x166000 +/* [RW 32] Interrupt mask register #0 read/write */ +#define XSDM_REG_XSDM_INT_MASK_0 0x16629c +#define XSDM_REG_XSDM_INT_MASK_1 0x1662ac +/* [RW 11] Parity mask register #0 read/write */ +#define XSDM_REG_XSDM_PRTY_MASK 0x1662bc +/* [RW 5] The number of time_slots in the arbitration cycle */ +#define XSEM_REG_ARB_CYCLE_SIZE 0x280034 +/* [RW 3] The source that is associated with arbitration element 0. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2 */ +#define XSEM_REG_ARB_ELEMENT0 0x280020 +/* [RW 3] The source that is associated with arbitration element 1. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~xsem_registers_arb_element0.arb_element0 */ +#define XSEM_REG_ARB_ELEMENT1 0x280024 +/* [RW 3] The source that is associated with arbitration element 2. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~xsem_registers_arb_element0.arb_element0 + and ~xsem_registers_arb_element1.arb_element1 */ +#define XSEM_REG_ARB_ELEMENT2 0x280028 +/* [RW 3] The source that is associated with arbitration element 3. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2.Could + not be equal to register ~xsem_registers_arb_element0.arb_element0 and + ~xsem_registers_arb_element1.arb_element1 and + ~xsem_registers_arb_element2.arb_element2 */ +#define XSEM_REG_ARB_ELEMENT3 0x28002c +/* [RW 3] The source that is associated with arbitration element 4. Source + decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3- + sleeping thread with priority 1; 4- sleeping thread with priority 2. + Could not be equal to register ~xsem_registers_arb_element0.arb_element0 + and ~xsem_registers_arb_element1.arb_element1 and + ~xsem_registers_arb_element2.arb_element2 and + ~xsem_registers_arb_element3.arb_element3 */ +#define XSEM_REG_ARB_ELEMENT4 0x280030 +#define XSEM_REG_ENABLE_IN 0x2800a4 +#define XSEM_REG_ENABLE_OUT 0x2800a8 +/* [RW 32] This address space contains all registers and memories that are + placed in SEM_FAST block. The SEM_FAST registers are described in + appendix B. In order to access the SEM_FAST registers the base address + XSEM_REGISTERS_FAST_MEMORY (Offset: 0x2a0000) should be added to each + SEM_FAST register offset. */ +#define XSEM_REG_FAST_MEMORY 0x2a0000 +/* [RW 1] Disables input messages from FIC0 May be updated during run_time + by the microcode */ +#define XSEM_REG_FIC0_DISABLE 0x280224 +/* [RW 1] Disables input messages from FIC1 May be updated during run_time + by the microcode */ +#define XSEM_REG_FIC1_DISABLE 0x280234 +/* [RW 15] Interrupt table Read and write access to it is not possible in + the middle of the work */ +#define XSEM_REG_INT_TABLE 0x280400 +/* [ST 24] Statistics register. The number of messages that entered through + FIC0 */ +#define XSEM_REG_MSG_NUM_FIC0 0x280000 +/* [ST 24] Statistics register. The number of messages that entered through + FIC1 */ +#define XSEM_REG_MSG_NUM_FIC1 0x280004 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC0 */ +#define XSEM_REG_MSG_NUM_FOC0 0x280008 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC1 */ +#define XSEM_REG_MSG_NUM_FOC1 0x28000c +/* [ST 24] Statistics register. The number of messages that were sent to + FOC2 */ +#define XSEM_REG_MSG_NUM_FOC2 0x280010 +/* [ST 24] Statistics register. The number of messages that were sent to + FOC3 */ +#define XSEM_REG_MSG_NUM_FOC3 0x280014 +/* [RW 1] Disables input messages from the passive buffer May be updated + during run_time by the microcode */ +#define XSEM_REG_PAS_DISABLE 0x28024c +/* [WB 128] Debug only. Passive buffer memory */ +#define XSEM_REG_PASSIVE_BUFFER 0x282000 +/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */ +#define XSEM_REG_PRAM 0x2c0000 +/* [R 16] Valid sleeping threads indication have bit per thread */ +#define XSEM_REG_SLEEP_THREADS_VALID 0x28026c +/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */ +#define XSEM_REG_SLOW_EXT_STORE_EMPTY 0x2802a0 +/* [RW 16] List of free threads . There is a bit per thread. */ +#define XSEM_REG_THREADS_LIST 0x2802e4 +/* [RW 3] The arbitration scheme of time_slot 0 */ +#define XSEM_REG_TS_0_AS 0x280038 +/* [RW 3] The arbitration scheme of time_slot 10 */ +#define XSEM_REG_TS_10_AS 0x280060 +/* [RW 3] The arbitration scheme of time_slot 11 */ +#define XSEM_REG_TS_11_AS 0x280064 +/* [RW 3] The arbitration scheme of time_slot 12 */ +#define XSEM_REG_TS_12_AS 0x280068 +/* [RW 3] The arbitration scheme of time_slot 13 */ +#define XSEM_REG_TS_13_AS 0x28006c +/* [RW 3] The arbitration scheme of time_slot 14 */ +#define XSEM_REG_TS_14_AS 0x280070 +/* [RW 3] The arbitration scheme of time_slot 15 */ +#define XSEM_REG_TS_15_AS 0x280074 +/* [RW 3] The arbitration scheme of time_slot 16 */ +#define XSEM_REG_TS_16_AS 0x280078 +/* [RW 3] The arbitration scheme of time_slot 17 */ +#define XSEM_REG_TS_17_AS 0x28007c +/* [RW 3] The arbitration scheme of time_slot 18 */ +#define XSEM_REG_TS_18_AS 0x280080 +/* [RW 3] The arbitration scheme of time_slot 1 */ +#define XSEM_REG_TS_1_AS 0x28003c +/* [RW 3] The arbitration scheme of time_slot 2 */ +#define XSEM_REG_TS_2_AS 0x280040 +/* [RW 3] The arbitration scheme of time_slot 3 */ +#define XSEM_REG_TS_3_AS 0x280044 +/* [RW 3] The arbitration scheme of time_slot 4 */ +#define XSEM_REG_TS_4_AS 0x280048 +/* [RW 3] The arbitration scheme of time_slot 5 */ +#define XSEM_REG_TS_5_AS 0x28004c +/* [RW 3] The arbitration scheme of time_slot 6 */ +#define XSEM_REG_TS_6_AS 0x280050 +/* [RW 3] The arbitration scheme of time_slot 7 */ +#define XSEM_REG_TS_7_AS 0x280054 +/* [RW 3] The arbitration scheme of time_slot 8 */ +#define XSEM_REG_TS_8_AS 0x280058 +/* [RW 3] The arbitration scheme of time_slot 9 */ +#define XSEM_REG_TS_9_AS 0x28005c +/* [RW 32] Interrupt mask register #0 read/write */ +#define XSEM_REG_XSEM_INT_MASK_0 0x280110 +#define XSEM_REG_XSEM_INT_MASK_1 0x280120 +/* [RW 32] Parity mask register #0 read/write */ +#define XSEM_REG_XSEM_PRTY_MASK_0 0x280130 +#define XSEM_REG_XSEM_PRTY_MASK_1 0x280140 +#define MCPR_NVM_ACCESS_ENABLE_EN (1L<<0) +#define MCPR_NVM_ACCESS_ENABLE_WR_EN (1L<<1) +#define MCPR_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL<<0) +#define MCPR_NVM_CFG4_FLASH_SIZE (0x7L<<0) +#define MCPR_NVM_COMMAND_DOIT (1L<<4) +#define MCPR_NVM_COMMAND_DONE (1L<<3) +#define MCPR_NVM_COMMAND_FIRST (1L<<7) +#define MCPR_NVM_COMMAND_LAST (1L<<8) +#define MCPR_NVM_COMMAND_WR (1L<<5) +#define MCPR_NVM_COMMAND_WREN (1L<<16) +#define MCPR_NVM_COMMAND_WREN_BITSHIFT 16 +#define MCPR_NVM_COMMAND_WRDI (1L<<17) +#define MCPR_NVM_COMMAND_WRDI_BITSHIFT 17 +#define MCPR_NVM_SW_ARB_ARB_ARB1 (1L<<9) +#define MCPR_NVM_SW_ARB_ARB_REQ_CLR1 (1L<<5) +#define MCPR_NVM_SW_ARB_ARB_REQ_SET1 (1L<<1) +#define BIGMAC_REGISTER_BMAC_CONTROL (0x00<<3) +#define BIGMAC_REGISTER_BMAC_XGXS_CONTROL (0x01<<3) +#define BIGMAC_REGISTER_CNT_MAX_SIZE (0x05<<3) +#define BIGMAC_REGISTER_RX_CONTROL (0x21<<3) +#define BIGMAC_REGISTER_RX_LLFC_MSG_FLDS (0x46<<3) +#define BIGMAC_REGISTER_RX_MAX_SIZE (0x23<<3) +#define BIGMAC_REGISTER_RX_STAT_GR64 (0x26<<3) +#define BIGMAC_REGISTER_RX_STAT_GRIPJ (0x42<<3) +#define BIGMAC_REGISTER_TX_CONTROL (0x07<<3) +#define BIGMAC_REGISTER_TX_MAX_SIZE (0x09<<3) +#define BIGMAC_REGISTER_TX_PAUSE_THRESHOLD (0x0A<<3) +#define BIGMAC_REGISTER_TX_SOURCE_ADDR (0x08<<3) +#define BIGMAC_REGISTER_TX_STAT_GTBYT (0x20<<3) +#define BIGMAC_REGISTER_TX_STAT_GTPKT (0x0C<<3) +#define EMAC_MDIO_COMM_COMMAND_ADDRESS (0L<<26) +#define EMAC_MDIO_COMM_COMMAND_READ_22 (2L<<26) +#define EMAC_MDIO_COMM_COMMAND_READ_45 (3L<<26) +#define EMAC_MDIO_COMM_COMMAND_WRITE_22 (1L<<26) +#define EMAC_MDIO_COMM_COMMAND_WRITE_45 (1L<<26) +#define EMAC_MDIO_COMM_DATA (0xffffL<<0) +#define EMAC_MDIO_COMM_START_BUSY (1L<<29) +#define EMAC_MDIO_MODE_AUTO_POLL (1L<<4) +#define EMAC_MDIO_MODE_CLAUSE_45 (1L<<31) +#define EMAC_MODE_25G_MODE (1L<<5) +#define EMAC_MODE_ACPI_RCVD (1L<<20) +#define EMAC_MODE_HALF_DUPLEX (1L<<1) +#define EMAC_MODE_MPKT (1L<<18) +#define EMAC_MODE_MPKT_RCVD (1L<<19) +#define EMAC_MODE_PORT_GMII (2L<<2) +#define EMAC_MODE_PORT_MII (1L<<2) +#define EMAC_MODE_PORT_MII_10M (3L<<2) +#define EMAC_MODE_RESET (1L<<0) +#define EMAC_REG_EMAC_MAC_MATCH 0x10 +#define EMAC_REG_EMAC_MDIO_COMM 0xac +#define EMAC_REG_EMAC_MDIO_MODE 0xb4 +#define EMAC_REG_EMAC_MODE 0x0 +#define EMAC_REG_EMAC_RX_MODE 0xc8 +#define EMAC_REG_EMAC_RX_MTU_SIZE 0x9c +#define EMAC_REG_EMAC_RX_STAT_AC 0x180 +#define EMAC_REG_EMAC_RX_STAT_AC_28 0x1f4 +#define EMAC_REG_EMAC_RX_STAT_AC_COUNT 23 +#define EMAC_REG_EMAC_TX_MODE 0xbc +#define EMAC_REG_EMAC_TX_STAT_AC 0x280 +#define EMAC_REG_EMAC_TX_STAT_AC_COUNT 22 +#define EMAC_RX_MODE_FLOW_EN (1L<<2) +#define EMAC_RX_MODE_KEEP_VLAN_TAG (1L<<10) +#define EMAC_RX_MODE_PROMISCUOUS (1L<<8) +#define EMAC_RX_MTU_SIZE_JUMBO_ENA (1L<<31) +#define EMAC_TX_MODE_EXT_PAUSE_EN (1L<<3) +#define EMAC_TX_MODE_RESET (1L<<0) +#define MISC_REGISTERS_RESET_REG_1_CLEAR 0x588 +#define MISC_REGISTERS_RESET_REG_1_SET 0x584 +#define MISC_REGISTERS_RESET_REG_2_CLEAR 0x598 +#define MISC_REGISTERS_RESET_REG_2_RST_BMAC0 (0x1<<0) +#define MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE (0x1<<14) +#define MISC_REGISTERS_RESET_REG_2_SET 0x594 +#define MISC_REGISTERS_RESET_REG_3_CLEAR 0x5a8 +#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_IDDQ (0x1<<1) +#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN (0x1<<2) +#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN_SD (0x1<<3) +#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_RSTB_HW (0x1<<0) +#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_IDDQ (0x1<<5) +#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN (0x1<<6) +#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN_SD (0x1<<7) +#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW (0x1<<4) +#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB (0x1<<8) +#define MISC_REGISTERS_RESET_REG_3_SET 0x5a4 +#define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (1<<18) +#define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT (1<<31) +#define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT (1<<9) +#define AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR (1<<8) +#define AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT (1<<7) +#define AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR (1<<6) +#define AEU_INPUTS_ATTN_BITS_CSDM_HW_INTERRUPT (1<<29) +#define AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR (1<<28) +#define AEU_INPUTS_ATTN_BITS_CSEMI_HW_INTERRUPT (1<<1) +#define AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR (1<<0) +#define AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR (1<<18) +#define AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT (1<<11) +#define AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT (1<<13) +#define AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR (1<<12) +#define AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR (1<<12) +#define AEU_INPUTS_ATTN_BITS_MISC_HW_INTERRUPT (1<<15) +#define AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR (1<<14) +#define AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR (1<<20) +#define AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR (1<<0) +#define AEU_INPUTS_ATTN_BITS_PBF_HW_INTERRUPT (1<<31) +#define AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT (1<<3) +#define AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR (1<<2) +#define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT (1<<5) +#define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR (1<<4) +#define AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT (1<<3) +#define AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR (1<<2) +#define AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR (1<<22) +#define AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT (1<<27) +#define AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT (1<<5) +#define AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT (1<<25) +#define AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR (1<<24) +#define AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT (1<<29) +#define AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR (1<<28) +#define AEU_INPUTS_ATTN_BITS_UCM_HW_INTERRUPT (1<<23) +#define AEU_INPUTS_ATTN_BITS_UPB_HW_INTERRUPT (1<<27) +#define AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR (1<<26) +#define AEU_INPUTS_ATTN_BITS_USDM_HW_INTERRUPT (1<<21) +#define AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR (1<<20) +#define AEU_INPUTS_ATTN_BITS_USEMI_HW_INTERRUPT (1<<25) +#define AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR (1<<24) +#define AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR (1<<16) +#define AEU_INPUTS_ATTN_BITS_XCM_HW_INTERRUPT (1<<9) +#define AEU_INPUTS_ATTN_BITS_XSDM_HW_INTERRUPT (1<<7) +#define AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR (1<<6) +#define AEU_INPUTS_ATTN_BITS_XSEMI_HW_INTERRUPT (1<<11) +#define AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR (1<<10) +#define RESERVED_GENERAL_ATTENTION_BIT_0 0 + +#define EVEREST_GEN_ATTN_IN_USE_MASK 0x3e0 +#define EVEREST_LATCHED_ATTN_IN_USE_MASK 0xffe00000 + +#define RESERVED_GENERAL_ATTENTION_BIT_6 6 +#define RESERVED_GENERAL_ATTENTION_BIT_7 7 +#define RESERVED_GENERAL_ATTENTION_BIT_8 8 +#define RESERVED_GENERAL_ATTENTION_BIT_9 9 +#define RESERVED_GENERAL_ATTENTION_BIT_10 10 +#define RESERVED_GENERAL_ATTENTION_BIT_11 11 +#define RESERVED_GENERAL_ATTENTION_BIT_12 12 +#define RESERVED_GENERAL_ATTENTION_BIT_13 13 +#define RESERVED_GENERAL_ATTENTION_BIT_14 14 +#define RESERVED_GENERAL_ATTENTION_BIT_15 15 +#define RESERVED_GENERAL_ATTENTION_BIT_16 16 +#define RESERVED_GENERAL_ATTENTION_BIT_17 17 +#define RESERVED_GENERAL_ATTENTION_BIT_18 18 +#define RESERVED_GENERAL_ATTENTION_BIT_19 19 +#define RESERVED_GENERAL_ATTENTION_BIT_20 20 +#define RESERVED_GENERAL_ATTENTION_BIT_21 21 + +/* storm asserts attention bits */ +#define TSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_7 +#define USTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_8 +#define CSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_9 +#define XSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_10 + +/* mcp error attention bit */ +#define MCP_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_11 + +#define LATCHED_ATTN_RBCR 23 +#define LATCHED_ATTN_RBCT 24 +#define LATCHED_ATTN_RBCN 25 +#define LATCHED_ATTN_RBCU 26 +#define LATCHED_ATTN_RBCP 27 +#define LATCHED_ATTN_TIMEOUT_GRC 28 +#define LATCHED_ATTN_RSVD_GRC 29 +#define LATCHED_ATTN_ROM_PARITY_MCP 30 +#define LATCHED_ATTN_UM_RX_PARITY_MCP 31 +#define LATCHED_ATTN_UM_TX_PARITY_MCP 32 +#define LATCHED_ATTN_SCPAD_PARITY_MCP 33 + +#define GENERAL_ATTEN_WORD(atten_name) ((94 + atten_name) / 32) +#define GENERAL_ATTEN_OFFSET(atten_name) (1 << ((94 + atten_name) % 32)) +/* + * This file defines GRC base address for every block. + * This file is included by chipsim, asm microcode and cpp microcode. + * These values are used in Design.xml on regBase attribute + * Use the base with the generated offsets of specific registers. + */ + +#define GRCBASE_PXPCS 0x000000 +#define GRCBASE_PCICONFIG 0x002000 +#define GRCBASE_PCIREG 0x002400 +#define GRCBASE_EMAC0 0x008000 +#define GRCBASE_EMAC1 0x008400 +#define GRCBASE_DBU 0x008800 +#define GRCBASE_MISC 0x00A000 +#define GRCBASE_DBG 0x00C000 +#define GRCBASE_NIG 0x010000 +#define GRCBASE_XCM 0x020000 +#define GRCBASE_PRS 0x040000 +#define GRCBASE_SRCH 0x040400 +#define GRCBASE_TSDM 0x042000 +#define GRCBASE_TCM 0x050000 +#define GRCBASE_BRB1 0x060000 +#define GRCBASE_MCP 0x080000 +#define GRCBASE_UPB 0x0C1000 +#define GRCBASE_CSDM 0x0C2000 +#define GRCBASE_USDM 0x0C4000 +#define GRCBASE_CCM 0x0D0000 +#define GRCBASE_UCM 0x0E0000 +#define GRCBASE_CDU 0x101000 +#define GRCBASE_DMAE 0x102000 +#define GRCBASE_PXP 0x103000 +#define GRCBASE_CFC 0x104000 +#define GRCBASE_HC 0x108000 +#define GRCBASE_PXP2 0x120000 +#define GRCBASE_PBF 0x140000 +#define GRCBASE_XPB 0x161000 +#define GRCBASE_TIMERS 0x164000 +#define GRCBASE_XSDM 0x166000 +#define GRCBASE_QM 0x168000 +#define GRCBASE_DQ 0x170000 +#define GRCBASE_TSEM 0x180000 +#define GRCBASE_CSEM 0x200000 +#define GRCBASE_XSEM 0x280000 +#define GRCBASE_USEM 0x300000 +#define GRCBASE_MISC_AEU GRCBASE_MISC + + +/*the offset of the configuration space in the pci core register*/ +#define PCICFG_OFFSET 0x2000 +#define PCICFG_VENDOR_ID_OFFSET 0x00 +#define PCICFG_DEVICE_ID_OFFSET 0x02 +#define PCICFG_SUBSYSTEM_VENDOR_ID_OFFSET 0x2c +#define PCICFG_SUBSYSTEM_ID_OFFSET 0x2e +#define PCICFG_INT_LINE 0x3c +#define PCICFG_INT_PIN 0x3d +#define PCICFG_CACHE_LINE_SIZE 0x0c +#define PCICFG_LATENCY_TIMER 0x0d +#define PCICFG_REVESION_ID 0x08 +#define PCICFG_BAR_1_LOW 0x10 +#define PCICFG_BAR_1_HIGH 0x14 +#define PCICFG_BAR_2_LOW 0x18 +#define PCICFG_BAR_2_HIGH 0x1c +#define PCICFG_GRC_ADDRESS 0x78 +#define PCICFG_GRC_DATA 0x80 +#define PCICFG_DEVICE_CONTROL 0xb4 +#define PCICFG_LINK_CONTROL 0xbc + +#define BAR_USTRORM_INTMEM 0x400000 +#define BAR_CSTRORM_INTMEM 0x410000 +#define BAR_XSTRORM_INTMEM 0x420000 +#define BAR_TSTRORM_INTMEM 0x430000 + +#define BAR_IGU_INTMEM 0x440000 + +#define BAR_DOORBELL_OFFSET 0x800000 + +#define BAR_ME_REGISTER 0x450000 + + +#define GRC_CONFIG_2_SIZE_REG 0x408 /* config_2 offset */ +#define PCI_CONFIG_2_BAR1_SIZE (0xfL<<0) +#define PCI_CONFIG_2_BAR1_SIZE_DISABLED (0L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_64K (1L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_128K (2L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_256K (3L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_512K (4L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_1M (5L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_2M (6L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_4M (7L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_8M (8L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_16M (9L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_32M (10L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_64M (11L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_128M (12L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_256M (13L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_512M (14L<<0) +#define PCI_CONFIG_2_BAR1_SIZE_1G (15L<<0) +#define PCI_CONFIG_2_BAR1_64ENA (1L<<4) +#define PCI_CONFIG_2_EXP_ROM_RETRY (1L<<5) +#define PCI_CONFIG_2_CFG_CYCLE_RETRY (1L<<6) +#define PCI_CONFIG_2_FIRST_CFG_DONE (1L<<7) +#define PCI_CONFIG_2_EXP_ROM_SIZE (0xffL<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_DISABLED (0L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_2K (1L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_4K (2L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_8K (3L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_16K (4L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_32K (5L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_64K (6L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_128K (7L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_256K (8L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_512K (9L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_1M (10L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_2M (11L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_4M (12L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_8M (13L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_16M (14L<<8) +#define PCI_CONFIG_2_EXP_ROM_SIZE_32M (15L<<8) +#define PCI_CONFIG_2_BAR_PREFETCH (1L<<16) +#define PCI_CONFIG_2_RESERVED0 (0x7fffL<<17) + +/* config_3 offset */ +#define GRC_CONFIG_3_SIZE_REG (0x40c) +#define PCI_CONFIG_3_STICKY_BYTE (0xffL<<0) +#define PCI_CONFIG_3_FORCE_PME (1L<<24) +#define PCI_CONFIG_3_PME_STATUS (1L<<25) +#define PCI_CONFIG_3_PME_ENABLE (1L<<26) +#define PCI_CONFIG_3_PM_STATE (0x3L<<27) +#define PCI_CONFIG_3_VAUX_PRESET (1L<<30) +#define PCI_CONFIG_3_PCI_POWER (1L<<31) + +/* config_2 offset */ +#define GRC_CONFIG_2_SIZE_REG 0x408 + +#define GRC_BAR2_CONFIG 0x4e0 +#define PCI_CONFIG_2_BAR2_SIZE (0xfL<<0) +#define PCI_CONFIG_2_BAR2_SIZE_DISABLED (0L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_64K (1L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_128K (2L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_256K (3L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_512K (4L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_1M (5L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_2M (6L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_4M (7L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_8M (8L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_16M (9L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_32M (10L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_64M (11L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_128M (12L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_256M (13L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_512M (14L<<0) +#define PCI_CONFIG_2_BAR2_SIZE_1G (15L<<0) +#define PCI_CONFIG_2_BAR2_64ENA (1L<<4) + +#define PCI_PM_DATA_A (0x410) +#define PCI_PM_DATA_B (0x414) +#define PCI_ID_VAL1 (0x434) +#define PCI_ID_VAL2 (0x438) + +#define MDIO_REG_BANK_CL73_IEEEB0 0x0 +#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL 0x0 +#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN 0x0200 +#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN 0x1000 +#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_MAIN_RST 0x8000 + +#define MDIO_REG_BANK_CL73_IEEEB1 0x10 +#define MDIO_CL73_IEEEB1_AN_ADV2 0x01 +#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M 0x0000 +#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX 0x0020 +#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4 0x0040 +#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR 0x0080 + +#define MDIO_REG_BANK_RX0 0x80b0 +#define MDIO_RX0_RX_EQ_BOOST 0x1c +#define MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7 +#define MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL 0x10 + +#define MDIO_REG_BANK_RX1 0x80c0 +#define MDIO_RX1_RX_EQ_BOOST 0x1c +#define MDIO_RX1_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7 +#define MDIO_RX1_RX_EQ_BOOST_OFFSET_CTRL 0x10 + +#define MDIO_REG_BANK_RX2 0x80d0 +#define MDIO_RX2_RX_EQ_BOOST 0x1c +#define MDIO_RX2_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7 +#define MDIO_RX2_RX_EQ_BOOST_OFFSET_CTRL 0x10 + +#define MDIO_REG_BANK_RX3 0x80e0 +#define MDIO_RX3_RX_EQ_BOOST 0x1c +#define MDIO_RX3_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7 +#define MDIO_RX3_RX_EQ_BOOST_OFFSET_CTRL 0x10 + +#define MDIO_REG_BANK_RX_ALL 0x80f0 +#define MDIO_RX_ALL_RX_EQ_BOOST 0x1c +#define MDIO_RX_ALL_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7 +#define MDIO_RX_ALL_RX_EQ_BOOST_OFFSET_CTRL 0x10 + +#define MDIO_REG_BANK_TX0 0x8060 +#define MDIO_TX0_TX_DRIVER 0x17 +#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000 +#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12 +#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00 +#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8 +#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0 +#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4 +#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e +#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1 +#define MDIO_TX0_TX_DRIVER_ICBUF1T 1 + +#define MDIO_REG_BANK_XGXS_BLOCK0 0x8000 +#define MDIO_BLOCK0_XGXS_CONTROL 0x10 + +#define MDIO_REG_BANK_XGXS_BLOCK1 0x8010 +#define MDIO_BLOCK1_LANE_CTRL0 0x15 +#define MDIO_BLOCK1_LANE_CTRL1 0x16 +#define MDIO_BLOCK1_LANE_CTRL2 0x17 +#define MDIO_BLOCK1_LANE_PRBS 0x19 + +#define MDIO_REG_BANK_XGXS_BLOCK2 0x8100 +#define MDIO_XGXS_BLOCK2_RX_LN_SWAP 0x10 +#define MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE 0x8000 +#define MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE 0x4000 +#define MDIO_XGXS_BLOCK2_TX_LN_SWAP 0x11 +#define MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE 0x8000 +#define MDIO_XGXS_BLOCK2_TEST_MODE_LANE 0x15 + +#define MDIO_REG_BANK_GP_STATUS 0x8120 +#define MDIO_GP_STATUS_TOP_AN_STATUS1 0x1B +#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE 0x0001 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE 0x0002 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS 0x0004 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS 0x0008 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE 0x0010 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_LP_NP_BAM_ABLE 0x0020 + +#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE 0x0040 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE 0x0080 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK 0x3f00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M 0x0000 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M 0x0100 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G 0x0200 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G 0x0300 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G 0x0400 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G 0x0500 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG 0x0600 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4 0x0700 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG 0x0800 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G 0x0900 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G 0x0A00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G 0x0B00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G 0x0C00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX 0x0D00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4 0x0E00 + + +#define MDIO_REG_BANK_10G_PARALLEL_DETECT 0x8130 +#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL 0x11 +#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN 0x1 +#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK 0x13 +#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT (0xb71<<1) + +#define MDIO_REG_BANK_SERDES_DIGITAL 0x8300 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1 0x10 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE 0x0001 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_TBI_IF 0x0002 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN 0x0004 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT 0x0008 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET 0x0010 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE 0x0020 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2 0x11 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN 0x0001 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_AN_FST_TMR 0x0040 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1 0x14 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_DUPLEX 0x0004 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_MASK 0x0018 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_SHIFT 3 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_2_5G 0x0018 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_1G 0x0010 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_100M 0x0008 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_10M 0x0000 +#define MDIO_SERDES_DIGITAL_MISC1 0x18 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_MASK 0xE000 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_25M 0x0000 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_100M 0x2000 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_125M 0x4000 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M 0x6000 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_187_5M 0x8000 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL 0x0010 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK 0x000f +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_2_5G 0x0000 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_5G 0x0001 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_6G 0x0002 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_HIG 0x0003 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4 0x0004 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12G 0x0005 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12_5G 0x0006 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G 0x0007 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_15G 0x0008 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_16G 0x0009 + +#define MDIO_REG_BANK_OVER_1G 0x8320 +#define MDIO_OVER_1G_DIGCTL_3_4 0x14 +#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_MASK 0xffe0 +#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_SHIFT 5 +#define MDIO_OVER_1G_UP1 0x19 +#define MDIO_OVER_1G_UP1_2_5G 0x0001 +#define MDIO_OVER_1G_UP1_5G 0x0002 +#define MDIO_OVER_1G_UP1_6G 0x0004 +#define MDIO_OVER_1G_UP1_10G 0x0010 +#define MDIO_OVER_1G_UP1_10GH 0x0008 +#define MDIO_OVER_1G_UP1_12G 0x0020 +#define MDIO_OVER_1G_UP1_12_5G 0x0040 +#define MDIO_OVER_1G_UP1_13G 0x0080 +#define MDIO_OVER_1G_UP1_15G 0x0100 +#define MDIO_OVER_1G_UP1_16G 0x0200 +#define MDIO_OVER_1G_UP2 0x1A +#define MDIO_OVER_1G_UP2_IPREDRIVER_MASK 0x0007 +#define MDIO_OVER_1G_UP2_IDRIVER_MASK 0x0038 +#define MDIO_OVER_1G_UP2_PREEMPHASIS_MASK 0x03C0 +#define MDIO_OVER_1G_UP3 0x1B +#define MDIO_OVER_1G_UP3_HIGIG2 0x0001 +#define MDIO_OVER_1G_LP_UP1 0x1C +#define MDIO_OVER_1G_LP_UP2 0x1D +#define MDIO_OVER_1G_LP_UP2_MR_ADV_OVER_1G_MASK 0x03ff +#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK 0x0780 +#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT 7 +#define MDIO_OVER_1G_LP_UP3 0x1E + +#define MDIO_REG_BANK_BAM_NEXT_PAGE 0x8350 +#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL 0x10 +#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE 0x0001 +#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN 0x0002 + +#define MDIO_REG_BANK_CL73_USERB0 0x8370 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL1 0x12 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN 0x8000 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN 0x4000 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN 0x2000 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL3 0x14 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL3_USE_CL73_HCD_MR 0x0001 + +#define MDIO_REG_BANK_AER_BLOCK 0xFFD0 +#define MDIO_AER_BLOCK_AER_REG 0x1E + +#define MDIO_REG_BANK_COMBO_IEEE0 0xFFE0 +#define MDIO_COMBO_IEEE0_MII_CONTROL 0x10 +#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK 0x2040 +#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_10 0x0000 +#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100 0x2000 +#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000 0x0040 +#define MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX 0x0100 +#define MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN 0x0200 +#define MDIO_COMBO_IEEO_MII_CONTROL_AN_EN 0x1000 +#define MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK 0x4000 +#define MDIO_COMBO_IEEO_MII_CONTROL_RESET 0x8000 +#define MDIO_COMBO_IEEE0_MII_STATUS 0x11 +#define MDIO_COMBO_IEEE0_MII_STATUS_LINK_PASS 0x0004 +#define MDIO_COMBO_IEEE0_MII_STATUS_AUTONEG_COMPLETE 0x0020 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV 0x14 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX 0x0020 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_HALF_DUPLEX 0x0040 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK 0x0180 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE 0x0000 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC 0x0080 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC 0x0100 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH 0x0180 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_NEXT_PAGE 0x8000 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1 0x15 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_NEXT_PAGE 0x8000 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_ACK 0x4000 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_MASK 0x0180 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_NONE\ + 0x0000 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_BOTH\ + 0x0180 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_HALF_DUP_CAP 0x0040 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_FULL_DUP_CAP 0x0020 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE 0x0001 + + +#define EXT_PHY_OPT_PMA_PMD_DEVAD 0x1 +#define EXT_PHY_OPT_WIS_DEVAD 0x2 +#define EXT_PHY_OPT_PCS_DEVAD 0x3 +#define EXT_PHY_OPT_PHY_XS_DEVAD 0x4 +#define EXT_PHY_OPT_CNTL 0x0 +#define EXT_PHY_OPT_PMD_RX_SD 0xa +#define EXT_PHY_OPT_PMD_MISC_CNTL 0xca0a +#define EXT_PHY_OPT_PHY_IDENTIFIER 0xc800 +#define EXT_PHY_OPT_PMD_DIGITAL_CNT 0xc808 +#define EXT_PHY_OPT_PMD_DIGITAL_SATUS 0xc809 +#define EXT_PHY_OPT_CMU_PLL_BYPASS 0xca09 +#define EXT_PHY_OPT_LASI_CNTL 0x9002 +#define EXT_PHY_OPT_RX_ALARM 0x9003 +#define EXT_PHY_OPT_LASI_STATUS 0x9005 +#define EXT_PHY_OPT_PCS_STATUS 0x0020 +#define EXT_PHY_OPT_XGXS_LANE_STATUS 0x0018 + +#define EXT_PHY_KR_PMA_PMD_DEVAD 0x1 +#define EXT_PHY_KR_PCS_DEVAD 0x3 +#define EXT_PHY_KR_AUTO_NEG_DEVAD 0x7 +#define EXT_PHY_KR_CTRL 0x0000 +#define EXT_PHY_KR_CTRL2 0x0007 +#define EXT_PHY_KR_PCS_STATUS 0x0020 +#define EXT_PHY_KR_PMD_CTRL 0x0096 +#define EXT_PHY_KR_LASI_CNTL 0x9002 +#define EXT_PHY_KR_LASI_STATUS 0x9005 +#define EXT_PHY_KR_MISC_CTRL1 0xca85 +#define EXT_PHY_KR_GEN_CTRL 0xca10 +#define EXT_PHY_KR_ROM_CODE 0xca19 + |