Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Support more Realtek wireless chips, from Jes Sorenson.

   2) New BPF types for per-cpu hash and arrap maps, from Alexei
      Starovoitov.

   3) Make several TCP sysctls per-namespace, from Nikolay Borisov.

   4) Allow the use of SO_REUSEPORT in order to do per-thread processing
   of incoming TCP/UDP connections.  The muxing can be done using a
   BPF program which hashes the incoming packet.  From Craig Gallek.

   5) Add a multiplexer for TCP streams, to provide a messaged based
      interface.  BPF programs can be used to determine the message
      boundaries.  From Tom Herbert.

   6) Add 802.1AE MACSEC support, from Sabrina Dubroca.

   7) Avoid factorial complexity when taking down an inetdev interface
      with lots of configured addresses.  We were doing things like
      traversing the entire address less for each address removed, and
      flushing the entire netfilter conntrack table for every address as
      well.

   8) Add and use SKB bulk free infrastructure, from Jesper Brouer.

   9) Allow offloading u32 classifiers to hardware, and implement for
      ixgbe, from John Fastabend.

  10) Allow configuring IRQ coalescing parameters on a per-queue basis,
      from Kan Liang.

  11) Extend ethtool so that larger link mode masks can be supported.
      From David Decotigny.

  12) Introduce devlink, which can be used to configure port link types
      (ethernet vs Infiniband, etc.), port splitting, and switch device
      level attributes as a whole.  From Jiri Pirko.

  13) Hardware offload support for flower classifiers, from Amir Vadai.

  14) Add "Local Checksum Offload".  Basically, for a tunneled packet
      the checksum of the outer header is 'constant' (because with the
      checksum field filled into the inner protocol header, the payload
      of the outer frame checksums to 'zero'), and we can take advantage
      of that in various ways.  From Edward Cree"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits)
  bonding: fix bond_get_stats()
  net: bcmgenet: fix dma api length mismatch
  net/mlx4_core: Fix backward compatibility on VFs
  phy: mdio-thunder: Fix some Kconfig typos
  lan78xx: add ndo_get_stats64
  lan78xx: handle statistics counter rollover
  RDS: TCP: Remove unused constant
  RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket
  net: smc911x: convert pxa dma to dmaengine
  team: remove duplicate set of flag IFF_MULTICAST
  bonding: remove duplicate set of flag IFF_MULTICAST
  net: fix a comment typo
  ethernet: micrel: fix some error codes
  ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it
  bpf, dst: add and use dst_tclassid helper
  bpf: make skb->tc_classid also readable
  net: mvneta: bm: clarify dependencies
  cls_bpf: reset class and reuse major in da
  ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c
  ldmvsw: Add ldmvsw.c driver code
  ...

1 files changed, 30 insertions, 36 deletions

diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index 6d04183ed955..0d40aef928e2 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -70,13 +70,6 @@ config CAN_AT91
 	  This is a driver for the SoC CAN controller in Atmel's AT91SAM9263
 	  and AT91SAM9X5 processors.
 
-config CAN_TI_HECC
-	depends on ARM
-	tristate "TI High End CAN Controller"
-	---help---
-	  Driver for TI HECC (High End CAN Controller) module found on many
-	  TI devices. The device specifications are available from www.ti.com
-
 config CAN_BFIN
 	depends on BF534 || BF536 || BF537 || BF538 || BF539 || BF54x
 	tristate "Analog Devices Blackfin on-chip CAN"
@@ -86,30 +79,12 @@ config CAN_BFIN
 	  To compile this driver as a module, choose M here: the
 	  module will be called bfin_can.
 
-config CAN_JANZ_ICAN3
-	tristate "Janz VMOD-ICAN3 Intelligent CAN controller"
-	depends on MFD_JANZ_CMODIO
-	---help---
-	  Driver for Janz VMOD-ICAN3 Intelligent CAN controller module, which
-	  connects to a MODULbus carrier board.
-
-	  This driver can also be built as a module. If so, the module will be
-	  called janz-ican3.ko.
-
 config CAN_FLEXCAN
 	tristate "Support for Freescale FLEXCAN based chips"
 	depends on ARM || PPC
 	---help---
 	  Say Y here if you want to support for Freescale FlexCAN.
 
-config PCH_CAN
-	tristate "Intel EG20T PCH CAN controller"
-	depends on PCI && (X86_32 || COMPILE_TEST)
-	---help---
-	  This driver is for PCH CAN of Topcliff (Intel EG20T PCH) which
-	  is an IOH for x86 embedded processor (Intel Atom E6xx series).
-	  This driver can access CAN bus.
-
 config CAN_GRCAN
 	tristate "Aeroflex Gaisler GRCAN and GRHCAN CAN devices"
 	depends on OF && HAS_DMA
@@ -119,9 +94,19 @@ config CAN_GRCAN
 	  endian syntheses of the cores would need some modifications on
 	  the hardware level to work.
 
+config CAN_JANZ_ICAN3
+	tristate "Janz VMOD-ICAN3 Intelligent CAN controller"
+	depends on MFD_JANZ_CMODIO
+	---help---
+	  Driver for Janz VMOD-ICAN3 Intelligent CAN controller module, which
+	  connects to a MODULbus carrier board.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called janz-ican3.ko.
+
 config CAN_RCAR
 	tristate "Renesas R-Car CAN controller"
-	depends on ARM
+	depends on ARCH_RENESAS || ARM
 	---help---
 	  Say Y here if you want to use CAN controller found on Renesas R-Car
 	  SoCs.
@@ -139,6 +124,13 @@ config CAN_SUN4I
 	  To compile this driver as a module, choose M here: the module will
 	  be called sun4i_can.
 
+config CAN_TI_HECC
+	depends on ARM
+	tristate "TI High End CAN Controller"
+	---help---
+	  Driver for TI HECC (High End CAN Controller) module found on many
+	  TI devices. The device specifications are available from www.ti.com
+
 config CAN_XILINXCAN
 	tristate "Xilinx CAN"
 	depends on ARCH_ZYNQ || ARM64 || MICROBLAZE || COMPILE_TEST
@@ -147,22 +139,24 @@ config CAN_XILINXCAN
 	  Xilinx CAN driver. This driver supports both soft AXI CAN IP and
 	  Zynq CANPS IP.
 
-source "drivers/net/can/mscan/Kconfig"
-
-source "drivers/net/can/sja1000/Kconfig"
+config PCH_CAN
+	tristate "Intel EG20T PCH CAN controller"
+	depends on PCI && (X86_32 || COMPILE_TEST)
+	---help---
+	  This driver is for PCH CAN of Topcliff (Intel EG20T PCH) which
+	  is an IOH for x86 embedded processor (Intel Atom E6xx series).
+	  This driver can access CAN bus.
 
 source "drivers/net/can/c_can/Kconfig"
-
-source "drivers/net/can/m_can/Kconfig"
-
 source "drivers/net/can/cc770/Kconfig"
-
+source "drivers/net/can/ifi_canfd/Kconfig"
+source "drivers/net/can/m_can/Kconfig"
+source "drivers/net/can/mscan/Kconfig"
+source "drivers/net/can/sja1000/Kconfig"
+source "drivers/net/can/softing/Kconfig"
 source "drivers/net/can/spi/Kconfig"
-
 source "drivers/net/can/usb/Kconfig"
 
-source "drivers/net/can/softing/Kconfig"
-
 endif
 
 config CAN_DEBUG_DEVICES