Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) New ipset extensions for matching on destination MAC addresses, from
    Stefano Brivio.

 2) Add ipv4 ttl and tos, plus ipv6 flow label and hop limit offloads to
    nfp driver. From Stefano Brivio.

 3) Implement GRO for plain UDP sockets, from Paolo Abeni.

 4) Lots of work from Michał Mirosław to eliminate the VLAN_TAG_PRESENT
    bit so that we could support the entire vlan_tci value.

 5) Rework the IPSEC policy lookups to better optimize more usecases,
    from Florian Westphal.

 6) Infrastructure changes eliminating direct manipulation of SKB lists
    wherever possible, and to always use the appropriate SKB list
    helpers. This work is still ongoing...

 7) Lots of PHY driver and state machine improvements and
    simplifications, from Heiner Kallweit.

 8) Various TSO deferral refinements, from Eric Dumazet.

 9) Add ntuple filter support to aquantia driver, from Dmitry Bogdanov.

10) Batch dropping of XDP packets in tuntap, from Jason Wang.

11) Lots of cleanups and improvements to the r8169 driver from Heiner
    Kallweit, including support for ->xmit_more. This driver has been
    getting some much needed love since he started working on it.

12) Lots of new forwarding selftests from Petr Machata.

13) Enable VXLAN learning in mlxsw driver, from Ido Schimmel.

14) Packed ring support for virtio, from Tiwei Bie.

15) Add new Aquantia AQtion USB driver, from Dmitry Bezrukov.

16) Add XDP support to dpaa2-eth driver, from Ioana Ciocoi Radulescu.

17) Implement coalescing on TCP backlog queue, from Eric Dumazet.

18) Implement carrier change in tun driver, from Nicolas Dichtel.

19) Support msg_zerocopy in UDP, from Willem de Bruijn.

20) Significantly improve garbage collection of neighbor objects when
    the table has many PERMANENT entries, from David Ahern.

21) Remove egdev usage from nfp and mlx5, and remove the facility
    completely from the tree as it no longer has any users. From Oz
    Shlomo and others.

22) Add a NETDEV_PRE_CHANGEADDR so that drivers can veto the change and
    therefore abort the operation before the commit phase (which is the
    NETDEV_CHANGEADDR event). From Petr Machata.

23) Add indirect call wrappers to avoid retpoline overhead, and use them
    in the GRO code paths. From Paolo Abeni.

24) Add support for netlink FDB get operations, from Roopa Prabhu.

25) Support bloom filter in mlxsw driver, from Nir Dotan.

26) Add SKB extension infrastructure. This consolidates the handling of
    the auxiliary SKB data used by IPSEC and bridge netfilter, and is
    designed to support the needs to MPTCP which could be integrated in
    the future.

27) Lots of XDP TX optimizations in mlx5 from Tariq Toukan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1845 commits)
  net: dccp: fix kernel crash on module load
  drivers/net: appletalk/cops: remove redundant if statement and mask
  bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw
  net/net_namespace: Check the return value of register_pernet_subsys()
  net/netlink_compat: Fix a missing check of nla_parse_nested
  ieee802154: lowpan_header_create check must check daddr
  net/mlx4_core: drop useless LIST_HEAD
  mlxsw: spectrum: drop useless LIST_HEAD
  net/mlx5e: drop useless LIST_HEAD
  iptunnel: Set tun_flags in the iptunnel_metadata_reply from src
  net/mlx5e: fix semicolon.cocci warnings
  staging: octeon: fix build failure with XFRM enabled
  net: Revert recent Spectre-v1 patches.
  can: af_can: Fix Spectre v1 vulnerability
  packet: validate address length if non-zero
  nfc: af_nfc: Fix Spectre v1 vulnerability
  phonet: af_phonet: Fix Spectre v1 vulnerability
  net: core: Fix Spectre v1 vulnerability
  net: minor cleanup in skb_ext_add()
  net: drop the unused helper skb_ext_get()
  ...

1 files changed, 34 insertions, 2 deletions

diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 045f0845e665..97d0933d9bd9 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -63,6 +63,7 @@ enum xcan_reg {
 	XCAN_FSR_OFFSET		= 0x00E8, /* RX FIFO Status */
 	XCAN_TXMSG_BASE_OFFSET	= 0x0100, /* TX Message Space */
 	XCAN_RXMSG_BASE_OFFSET	= 0x1100, /* RX Message Space */
+	XCAN_RXMSG_2_BASE_OFFSET	= 0x2100, /* RX Message Space */
 };
 
 #define XCAN_FRAME_ID_OFFSET(frame_base)	((frame_base) + 0x00)
@@ -75,6 +76,8 @@ enum xcan_reg {
 					 XCAN_CANFD_FRAME_SIZE * (n))
 #define XCAN_RXMSG_FRAME_OFFSET(n)	(XCAN_RXMSG_BASE_OFFSET + \
 					 XCAN_CANFD_FRAME_SIZE * (n))
+#define XCAN_RXMSG_2_FRAME_OFFSET(n)	(XCAN_RXMSG_2_BASE_OFFSET + \
+					 XCAN_CANFD_FRAME_SIZE * (n))
 
 /* the single TX mailbox used by this driver on CAN FD HW */
 #define XCAN_TX_MAILBOX_IDX		0
@@ -152,6 +155,7 @@ enum xcan_reg {
  * instead of the regular FIFO at 0x50
  */
 #define XCAN_FLAG_RX_FIFO_MULTI	0x0010
+#define XCAN_FLAG_CANFD_2	0x0020
 
 struct xcan_devtype_data {
 	unsigned int flags;
@@ -221,6 +225,18 @@ static const struct can_bittiming_const xcan_bittiming_const_canfd = {
 	.brp_inc = 1,
 };
 
+static const struct can_bittiming_const xcan_bittiming_const_canfd2 = {
+	.name = DRIVER_NAME,
+	.tseg1_min = 1,
+	.tseg1_max = 256,
+	.tseg2_min = 1,
+	.tseg2_max = 128,
+	.sjw_max = 128,
+	.brp_min = 1,
+	.brp_max = 256,
+	.brp_inc = 1,
+};
+
 /**
  * xcan_write_reg_le - Write a value to the device register little endian
  * @priv:	Driver private data structure
@@ -612,7 +628,7 @@ static int xcan_start_xmit_mailbox(struct sk_buff *skb, struct net_device *ndev)
  *
  * Return: NETDEV_TX_OK on success and NETDEV_TX_BUSY when the tx queue is full
  */
-static int xcan_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+static netdev_tx_t xcan_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 {
 	struct xcan_priv *priv = netdev_priv(ndev);
 	int ret;
@@ -973,7 +989,10 @@ static int xcan_rx_fifo_get_next_frame(struct xcan_priv *priv)
 		if (!(fsr & XCAN_FSR_FL_MASK))
 			return -ENOENT;
 
-		offset = XCAN_RXMSG_FRAME_OFFSET(fsr & XCAN_FSR_RI_MASK);
+		if (priv->devtype.flags & XCAN_FLAG_CANFD_2)
+			offset = XCAN_RXMSG_2_FRAME_OFFSET(fsr & XCAN_FSR_RI_MASK);
+		else
+			offset = XCAN_RXMSG_FRAME_OFFSET(fsr & XCAN_FSR_RI_MASK);
 
 	} else {
 		/* check if RX FIFO is empty */
@@ -1430,11 +1449,24 @@ static const struct xcan_devtype_data xcan_canfd_data = {
 	.bus_clk_name = "s_axi_aclk",
 };
 
+static const struct xcan_devtype_data xcan_canfd2_data = {
+	.flags = XCAN_FLAG_EXT_FILTERS |
+		 XCAN_FLAG_RXMNF |
+		 XCAN_FLAG_TX_MAILBOXES |
+		 XCAN_FLAG_CANFD_2 |
+		 XCAN_FLAG_RX_FIFO_MULTI,
+	.bittiming_const = &xcan_bittiming_const_canfd2,
+	.btr_ts2_shift = XCAN_BTR_TS2_SHIFT_CANFD,
+	.btr_sjw_shift = XCAN_BTR_SJW_SHIFT_CANFD,
+	.bus_clk_name = "s_axi_aclk",
+};
+
 /* Match table for OF platform binding */
 static const struct of_device_id xcan_of_match[] = {
 	{ .compatible = "xlnx,zynq-can-1.0", .data = &xcan_zynq_data },
 	{ .compatible = "xlnx,axi-can-1.00.a", .data = &xcan_axi_data },
 	{ .compatible = "xlnx,canfd-1.0", .data = &xcan_canfd_data },
+	{ .compatible = "xlnx,canfd-2.0", .data = &xcan_canfd2_data },
 	{ /* end of list */ },
 };
 MODULE_DEVICE_TABLE(of, xcan_of_match);