summaryrefslogtreecommitdiff
path: root/drivers/net/cs89x0.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/cs89x0.c
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/net/cs89x0.c')
-rw-r--r--drivers/net/cs89x0.c1866
1 files changed, 1866 insertions, 0 deletions
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
new file mode 100644
index 000000000000..5c5f540da26a
--- /dev/null
+++ b/drivers/net/cs89x0.c
@@ -0,0 +1,1866 @@
+/* cs89x0.c: A Crystal Semiconductor (Now Cirrus Logic) CS89[02]0
+ * driver for linux.
+ */
+
+/*
+ Written 1996 by Russell Nelson, with reference to skeleton.c
+ written 1993-1994 by Donald Becker.
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License, incorporated herein by reference.
+
+ The author may be reached at nelson@crynwr.com, Crynwr
+ Software, 521 Pleasant Valley Rd., Potsdam, NY 13676
+
+ Changelog:
+
+ Mike Cruse : mcruse@cti-ltd.com
+ : Changes for Linux 2.0 compatibility.
+ : Added dev_id parameter in net_interrupt(),
+ : request_irq() and free_irq(). Just NULL for now.
+
+ Mike Cruse : Added MOD_INC_USE_COUNT and MOD_DEC_USE_COUNT macros
+ : in net_open() and net_close() so kerneld would know
+ : that the module is in use and wouldn't eject the
+ : driver prematurely.
+
+ Mike Cruse : Rewrote init_module() and cleanup_module using 8390.c
+ : as an example. Disabled autoprobing in init_module(),
+ : not a good thing to do to other devices while Linux
+ : is running from all accounts.
+
+ Russ Nelson : Jul 13 1998. Added RxOnly DMA support.
+
+ Melody Lee : Aug 10 1999. Changes for Linux 2.2.5 compatibility.
+ : email: ethernet@crystal.cirrus.com
+
+ Alan Cox : Removed 1.2 support, added 2.1 extra counters.
+
+ Andrew Morton : andrewm@uow.edu.au
+ : Kernel 2.3.48
+ : Handle kmalloc() failures
+ : Other resource allocation fixes
+ : Add SMP locks
+ : Integrate Russ Nelson's ALLOW_DMA functionality back in.
+ : If ALLOW_DMA is true, make DMA runtime selectable
+ : Folded in changes from Cirrus (Melody Lee
+ : <klee@crystal.cirrus.com>)
+ : Don't call netif_wake_queue() in net_send_packet()
+ : Fixed an out-of-mem bug in dma_rx()
+ : Updated Documentation/networking/cs89x0.txt
+
+ Andrew Morton : andrewm@uow.edu.au / Kernel 2.3.99-pre1
+ : Use skb_reserve to longword align IP header (two places)
+ : Remove a delay loop from dma_rx()
+ : Replace '100' with HZ
+ : Clean up a couple of skb API abuses
+ : Added 'cs89x0_dma=N' kernel boot option
+ : Correctly initialise lp->lock in non-module compile
+
+ Andrew Morton : andrewm@uow.edu.au / Kernel 2.3.99-pre4-1
+ : MOD_INC/DEC race fix (see
+ : http://www.uwsg.indiana.edu/hypermail/linux/kernel/0003.3/1532.html)
+
+ Andrew Morton : andrewm@uow.edu.au / Kernel 2.4.0-test7-pre2
+ : Enhanced EEPROM support to cover more devices,
+ : abstracted IRQ mapping to support CONFIG_ARCH_CLPS7500 arch
+ : (Jason Gunthorpe <jgg@ualberta.ca>)
+
+ Andrew Morton : Kernel 2.4.0-test11-pre4
+ : Use dev->name in request_*() (Andrey Panin)
+ : Fix an error-path memleak in init_module()
+ : Preserve return value from request_irq()
+ : Fix type of `media' module parm (Keith Owens)
+ : Use SET_MODULE_OWNER()
+ : Tidied up strange request_irq() abuse in net_open().
+
+ Andrew Morton : Kernel 2.4.3-pre1
+ : Request correct number of pages for DMA (Hugh Dickens)
+ : Select PP_ChipID _after_ unregister_netdev in cleanup_module()
+ : because unregister_netdev() calls get_stats.
+ : Make `version[]' __initdata
+ : Uninlined the read/write reg/word functions.
+
+ Oskar Schirmer : oskar@scara.com
+ : HiCO.SH4 (superh) support added (irq#1, cs89x0_media=)
+
+ Deepak Saxena : dsaxena@plexity.net
+ : Intel IXDP2x01 (XScale ixp2x00 NPU) platform support
+
+*/
+
+/* Always include 'config.h' first in case the user wants to turn on
+ or override something. */
+#include <linux/config.h>
+#include <linux/module.h>
+
+/*
+ * Set this to zero to disable DMA code
+ *
+ * Note that even if DMA is turned off we still support the 'dma' and 'use_dma'
+ * module options so we don't break any startup scripts.
+ */
+#ifndef CONFIG_ARCH_IXDP2X01
+#define ALLOW_DMA 0
+#else
+#define ALLOW_DMA 1
+#endif
+
+/*
+ * Set this to zero to remove all the debug statements via
+ * dead code elimination
+ */
+#define DEBUGGING 1
+
+/*
+ Sources:
+
+ Crynwr packet driver epktisa.
+
+ Crystal Semiconductor data sheets.
+
+*/
+
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#if ALLOW_DMA
+#include <asm/dma.h>
+#endif
+
+#include "cs89x0.h"
+
+static char version[] __initdata =
+"cs89x0.c: v2.4.3-pre1 Russell Nelson <nelson@crynwr.com>, Andrew Morton <andrewm@uow.edu.au>\n";
+
+#define DRV_NAME "cs89x0"
+
+/* First, a few definitions that the brave might change.
+ A zero-terminated list of I/O addresses to be probed. Some special flags..
+ Addr & 1 = Read back the address port, look for signature and reset
+ the page window before probing
+ Addr & 3 = Reset the page window and probe
+ The CLPS eval board has the Cirrus chip at 0x80090300, in ARM IO space,
+ but it is possible that a Cirrus board could be plugged into the ISA
+ slots. */
+/* The cs8900 has 4 IRQ pins, software selectable. cs8900_irq_map maps
+ them to system IRQ numbers. This mapping is card specific and is set to
+ the configuration of the Cirrus Eval board for this chip. */
+#ifdef CONFIG_ARCH_CLPS7500
+static unsigned int netcard_portlist[] __initdata =
+ { 0x80090303, 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
+static unsigned int cs8900_irq_map[] = {12,0,0,0};
+#elif defined(CONFIG_SH_HICOSH4)
+static unsigned int netcard_portlist[] __initdata =
+ { 0x0300, 0};
+static unsigned int cs8900_irq_map[] = {1,0,0,0};
+#elif defined(CONFIG_ARCH_IXDP2X01)
+#include <asm/irq.h>
+static unsigned int netcard_portlist[] __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
+static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
+#else
+static unsigned int netcard_portlist[] __initdata =
+ { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
+static unsigned int cs8900_irq_map[] = {10,11,12,5};
+#endif
+
+#if DEBUGGING
+static unsigned int net_debug = DEBUGGING;
+#else
+#define net_debug 0 /* gcc will remove all the debug code for us */
+#endif
+
+/* The number of low I/O ports used by the ethercard. */
+#define NETCARD_IO_EXTENT 16
+
+/* we allow the user to override various values normally set in the EEPROM */
+#define FORCE_RJ45 0x0001 /* pick one of these three */
+#define FORCE_AUI 0x0002
+#define FORCE_BNC 0x0004
+
+#define FORCE_AUTO 0x0010 /* pick one of these three */
+#define FORCE_HALF 0x0020
+#define FORCE_FULL 0x0030
+
+/* Information that need to be kept for each board. */
+struct net_local {
+ struct net_device_stats stats;
+ int chip_type; /* one of: CS8900, CS8920, CS8920M */
+ char chip_revision; /* revision letter of the chip ('A'...) */
+ int send_cmd; /* the proper send command: TX_NOW, TX_AFTER_381, or TX_AFTER_ALL */
+ int auto_neg_cnf; /* auto-negotiation word from EEPROM */
+ int adapter_cnf; /* adapter configuration from EEPROM */
+ int isa_config; /* ISA configuration from EEPROM */
+ int irq_map; /* IRQ map from EEPROM */
+ int rx_mode; /* what mode are we in? 0, RX_MULTCAST_ACCEPT, or RX_ALL_ACCEPT */
+ int curr_rx_cfg; /* a copy of PP_RxCFG */
+ int linectl; /* either 0 or LOW_RX_SQUELCH, depending on configuration. */
+ int send_underrun; /* keep track of how many underruns in a row we get */
+ int force; /* force various values; see FORCE* above. */
+ spinlock_t lock;
+#if ALLOW_DMA
+ int use_dma; /* Flag: we're using dma */
+ int dma; /* DMA channel */
+ int dmasize; /* 16 or 64 */
+ unsigned char *dma_buff; /* points to the beginning of the buffer */
+ unsigned char *end_dma_buff; /* points to the end of the buffer */
+ unsigned char *rx_dma_ptr; /* points to the next packet */
+#endif
+};
+
+/* Index to functions, as function prototypes. */
+
+static int cs89x0_probe1(struct net_device *dev, int ioaddr, int modular);
+static int net_open(struct net_device *dev);
+static int net_send_packet(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t net_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static void set_multicast_list(struct net_device *dev);
+static void net_timeout(struct net_device *dev);
+static void net_rx(struct net_device *dev);
+static int net_close(struct net_device *dev);
+static struct net_device_stats *net_get_stats(struct net_device *dev);
+static void reset_chip(struct net_device *dev);
+static int get_eeprom_data(struct net_device *dev, int off, int len, int *buffer);
+static int get_eeprom_cksum(int off, int len, int *buffer);
+static int set_mac_address(struct net_device *dev, void *addr);
+static void count_rx_errors(int status, struct net_local *lp);
+#if ALLOW_DMA
+static void get_dma_channel(struct net_device *dev);
+static void release_dma_buff(struct net_local *lp);
+#endif
+
+/* Example routines you must write ;->. */
+#define tx_done(dev) 1
+
+/*
+ * Permit 'cs89x0_dma=N' in the kernel boot environment
+ */
+#if !defined(MODULE) && (ALLOW_DMA != 0)
+static int g_cs89x0_dma;
+
+static int __init dma_fn(char *str)
+{
+ g_cs89x0_dma = simple_strtol(str,NULL,0);
+ return 1;
+}
+
+__setup("cs89x0_dma=", dma_fn);
+#endif /* !defined(MODULE) && (ALLOW_DMA != 0) */
+
+#ifndef MODULE
+static int g_cs89x0_media__force;
+
+static int __init media_fn(char *str)
+{
+ if (!strcmp(str, "rj45")) g_cs89x0_media__force = FORCE_RJ45;
+ else if (!strcmp(str, "aui")) g_cs89x0_media__force = FORCE_AUI;
+ else if (!strcmp(str, "bnc")) g_cs89x0_media__force = FORCE_BNC;
+ return 1;
+}
+
+__setup("cs89x0_media=", media_fn);
+
+
+/* Check for a network adaptor of this type, and return '0' iff one exists.
+ If dev->base_addr == 0, probe all likely locations.
+ If dev->base_addr == 1, always return failure.
+ If dev->base_addr == 2, allocate space for the device and return success
+ (detachable devices only).
+ Return 0 on success.
+ */
+
+struct net_device * __init cs89x0_probe(int unit)
+{
+ struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
+ unsigned *port;
+ int err = 0;
+ int irq;
+ int io;
+
+ if (!dev)
+ return ERR_PTR(-ENODEV);
+
+ sprintf(dev->name, "eth%d", unit);
+ netdev_boot_setup_check(dev);
+ io = dev->base_addr;
+ irq = dev->irq;
+
+ if (net_debug)
+ printk("cs89x0:cs89x0_probe(0x%x)\n", io);
+
+ if (io > 0x1ff) { /* Check a single specified location. */
+ err = cs89x0_probe1(dev, io, 0);
+ } else if (io != 0) { /* Don't probe at all. */
+ err = -ENXIO;
+ } else {
+ for (port = netcard_portlist; *port; port++) {
+ if (cs89x0_probe1(dev, *port, 0) == 0)
+ break;
+ dev->irq = irq;
+ }
+ if (!*port)
+ err = -ENODEV;
+ }
+ if (err)
+ goto out;
+ err = register_netdev(dev);
+ if (err)
+ goto out1;
+ return dev;
+out1:
+ outw(PP_ChipID, dev->base_addr + ADD_PORT);
+ release_region(dev->base_addr, NETCARD_IO_EXTENT);
+out:
+ free_netdev(dev);
+ printk(KERN_WARNING "cs89x0: no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP\n");
+ return ERR_PTR(err);
+}
+#endif
+
+static int
+readreg(struct net_device *dev, int portno)
+{
+ outw(portno, dev->base_addr + ADD_PORT);
+ return inw(dev->base_addr + DATA_PORT);
+}
+
+static void
+writereg(struct net_device *dev, int portno, int value)
+{
+ outw(portno, dev->base_addr + ADD_PORT);
+ outw(value, dev->base_addr + DATA_PORT);
+}
+
+static int
+readword(struct net_device *dev, int portno)
+{
+ return inw(dev->base_addr + portno);
+}
+
+static void
+writeword(struct net_device *dev, int portno, int value)
+{
+ outw(value, dev->base_addr + portno);
+}
+
+static int __init
+wait_eeprom_ready(struct net_device *dev)
+{
+ int timeout = jiffies;
+ /* check to see if the EEPROM is ready, a timeout is used -
+ just in case EEPROM is ready when SI_BUSY in the
+ PP_SelfST is clear */
+ while(readreg(dev, PP_SelfST) & SI_BUSY)
+ if (jiffies - timeout >= 40)
+ return -1;
+ return 0;
+}
+
+static int __init
+get_eeprom_data(struct net_device *dev, int off, int len, int *buffer)
+{
+ int i;
+
+ if (net_debug > 3) printk("EEPROM data from %x for %x:\n",off,len);
+ for (i = 0; i < len; i++) {
+ if (wait_eeprom_ready(dev) < 0) return -1;
+ /* Now send the EEPROM read command and EEPROM location to read */
+ writereg(dev, PP_EECMD, (off + i) | EEPROM_READ_CMD);
+ if (wait_eeprom_ready(dev) < 0) return -1;
+ buffer[i] = readreg(dev, PP_EEData);
+ if (net_debug > 3) printk("%04x ", buffer[i]);
+ }
+ if (net_debug > 3) printk("\n");
+ return 0;
+}
+
+static int __init
+get_eeprom_cksum(int off, int len, int *buffer)
+{
+ int i, cksum;
+
+ cksum = 0;
+ for (i = 0; i < len; i++)
+ cksum += buffer[i];
+ cksum &= 0xffff;
+ if (cksum == 0)
+ return 0;
+ return -1;
+}
+
+/* This is the real probe routine. Linux has a history of friendly device
+ probes on the ISA bus. A good device probes avoids doing writes, and
+ verifies that the correct device exists and functions.
+ Return 0 on success.
+ */
+
+static int __init
+cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
+{
+ struct net_local *lp = netdev_priv(dev);
+ static unsigned version_printed;
+ int i;
+ unsigned rev_type = 0;
+ int eeprom_buff[CHKSUM_LEN];
+ int retval;
+
+ SET_MODULE_OWNER(dev);
+ /* Initialize the device structure. */
+ if (!modular) {
+ memset(lp, 0, sizeof(*lp));
+ spin_lock_init(&lp->lock);
+#ifndef MODULE
+#if ALLOW_DMA
+ if (g_cs89x0_dma) {
+ lp->use_dma = 1;
+ lp->dma = g_cs89x0_dma;
+ lp->dmasize = 16; /* Could make this an option... */
+ }
+#endif
+ lp->force = g_cs89x0_media__force;
+#endif
+ }
+
+ /* Grab the region so we can find another board if autoIRQ fails. */
+ /* WTF is going on here? */
+ if (!request_region(ioaddr & ~3, NETCARD_IO_EXTENT, DRV_NAME)) {
+ printk(KERN_ERR "%s: request_region(0x%x, 0x%x) failed\n",
+ DRV_NAME, ioaddr, NETCARD_IO_EXTENT);
+ retval = -EBUSY;
+ goto out1;
+ }
+
+#ifdef CONFIG_SH_HICOSH4
+ /* truely reset the chip */
+ outw(0x0114, ioaddr + ADD_PORT);
+ outw(0x0040, ioaddr + DATA_PORT);
+#endif
+
+ /* if they give us an odd I/O address, then do ONE write to
+ the address port, to get it back to address zero, where we
+ expect to find the EISA signature word. An IO with a base of 0x3
+ will skip the test for the ADD_PORT. */
+ if (ioaddr & 1) {
+ if (net_debug > 1)
+ printk(KERN_INFO "%s: odd ioaddr 0x%x\n", dev->name, ioaddr);
+ if ((ioaddr & 2) != 2)
+ if ((inw((ioaddr & ~3)+ ADD_PORT) & ADD_MASK) != ADD_SIG) {
+ printk(KERN_ERR "%s: bad signature 0x%x\n",
+ dev->name, inw((ioaddr & ~3)+ ADD_PORT));
+ retval = -ENODEV;
+ goto out2;
+ }
+ }
+printk("PP_addr=0x%x\n", inw(ioaddr + ADD_PORT));
+
+ ioaddr &= ~3;
+ outw(PP_ChipID, ioaddr + ADD_PORT);
+
+ if (inw(ioaddr + DATA_PORT) != CHIP_EISA_ID_SIG) {
+ printk(KERN_ERR "%s: incorrect signature 0x%x\n",
+ dev->name, inw(ioaddr + DATA_PORT));
+ retval = -ENODEV;
+ goto out2;
+ }
+
+ /* Fill in the 'dev' fields. */
+ dev->base_addr = ioaddr;
+
+ /* get the chip type */
+ rev_type = readreg(dev, PRODUCT_ID_ADD);
+ lp->chip_type = rev_type &~ REVISON_BITS;
+ lp->chip_revision = ((rev_type & REVISON_BITS) >> 8) + 'A';
+
+ /* Check the chip type and revision in order to set the correct send command
+ CS8920 revision C and CS8900 revision F can use the faster send. */
+ lp->send_cmd = TX_AFTER_381;
+ if (lp->chip_type == CS8900 && lp->chip_revision >= 'F')
+ lp->send_cmd = TX_NOW;
+ if (lp->chip_type != CS8900 && lp->chip_revision >= 'C')
+ lp->send_cmd = TX_NOW;
+
+ if (net_debug && version_printed++ == 0)
+ printk(version);
+
+ printk(KERN_INFO "%s: cs89%c0%s rev %c found at %#3lx ",
+ dev->name,
+ lp->chip_type==CS8900?'0':'2',
+ lp->chip_type==CS8920M?"M":"",
+ lp->chip_revision,
+ dev->base_addr);
+
+ reset_chip(dev);
+
+ /* Here we read the current configuration of the chip. If there
+ is no Extended EEPROM then the idea is to not disturb the chip
+ configuration, it should have been correctly setup by automatic
+ EEPROM read on reset. So, if the chip says it read the EEPROM
+ the driver will always do *something* instead of complain that
+ adapter_cnf is 0. */
+
+#ifdef CONFIG_SH_HICOSH4
+ if (1) {
+ /* For the HiCO.SH4 board, things are different: we don't
+ have EEPROM, but there is some data in flash, so we go
+ get it there directly (MAC). */
+ __u16 *confd;
+ short cnt;
+ if (((* (volatile __u32 *) 0xa0013ff0) & 0x00ffffff)
+ == 0x006c3000) {
+ confd = (__u16*) 0xa0013fc0;
+ } else {
+ confd = (__u16*) 0xa001ffc0;
+ }
+ cnt = (*confd++ & 0x00ff) >> 1;
+ while (--cnt > 0) {
+ __u16 j = *confd++;
+
+ switch (j & 0x0fff) {
+ case PP_IA:
+ for (i = 0; i < ETH_ALEN/2; i++) {
+ dev->dev_addr[i*2] = confd[i] & 0xFF;
+ dev->dev_addr[i*2+1] = confd[i] >> 8;
+ }
+ break;
+ }
+ j = (j >> 12) + 1;
+ confd += j;
+ cnt -= j;
+ }
+ } else
+#endif
+
+ if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) ==
+ (EEPROM_OK|EEPROM_PRESENT)) {
+ /* Load the MAC. */
+ for (i=0; i < ETH_ALEN/2; i++) {
+ unsigned int Addr;
+ Addr = readreg(dev, PP_IA+i*2);
+ dev->dev_addr[i*2] = Addr & 0xFF;
+ dev->dev_addr[i*2+1] = Addr >> 8;
+ }
+
+ /* Load the Adapter Configuration.
+ Note: Barring any more specific information from some
+ other source (ie EEPROM+Schematics), we would not know
+ how to operate a 10Base2 interface on the AUI port.
+ However, since we do read the status of HCB1 and use
+ settings that always result in calls to control_dc_dc(dev,0)
+ a BNC interface should work if the enable pin
+ (dc/dc converter) is on HCB1. It will be called AUI
+ however. */
+
+ lp->adapter_cnf = 0;
+ i = readreg(dev, PP_LineCTL);
+ /* Preserve the setting of the HCB1 pin. */
+ if ((i & (HCB1 | HCB1_ENBL)) == (HCB1 | HCB1_ENBL))
+ lp->adapter_cnf |= A_CNF_DC_DC_POLARITY;
+ /* Save the sqelch bit */
+ if ((i & LOW_RX_SQUELCH) == LOW_RX_SQUELCH)
+ lp->adapter_cnf |= A_CNF_EXTND_10B_2 | A_CNF_LOW_RX_SQUELCH;
+ /* Check if the card is in 10Base-t only mode */
+ if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == 0)
+ lp->adapter_cnf |= A_CNF_10B_T | A_CNF_MEDIA_10B_T;
+ /* Check if the card is in AUI only mode */
+ if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == AUI_ONLY)
+ lp->adapter_cnf |= A_CNF_AUI | A_CNF_MEDIA_AUI;
+ /* Check if the card is in Auto mode. */
+ if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == AUTO_AUI_10BASET)
+ lp->adapter_cnf |= A_CNF_AUI | A_CNF_10B_T |
+ A_CNF_MEDIA_AUI | A_CNF_MEDIA_10B_T | A_CNF_MEDIA_AUTO;
+
+ if (net_debug > 1)
+ printk(KERN_INFO "%s: PP_LineCTL=0x%x, adapter_cnf=0x%x\n",
+ dev->name, i, lp->adapter_cnf);
+
+ /* IRQ. Other chips already probe, see below. */
+ if (lp->chip_type == CS8900)
+ lp->isa_config = readreg(dev, PP_CS8900_ISAINT) & INT_NO_MASK;
+
+ printk( "[Cirrus EEPROM] ");
+ }
+
+ printk("\n");
+
+ /* First check to see if an EEPROM is attached. */
+#ifdef CONFIG_SH_HICOSH4 /* no EEPROM on HiCO, don't hazzle with it here */
+ if (1) {
+ printk(KERN_NOTICE "cs89x0: No EEPROM on HiCO.SH4\n");
+ } else
+#endif
+ if ((readreg(dev, PP_SelfST) & EEPROM_PRESENT) == 0)
+ printk(KERN_WARNING "cs89x0: No EEPROM, relying on command line....\n");
+ else if (get_eeprom_data(dev, START_EEPROM_DATA,CHKSUM_LEN,eeprom_buff) < 0) {
+ printk(KERN_WARNING "\ncs89x0: EEPROM read failed, relying on command line.\n");
+ } else if (get_eeprom_cksum(START_EEPROM_DATA,CHKSUM_LEN,eeprom_buff) < 0) {
+ /* Check if the chip was able to read its own configuration starting
+ at 0 in the EEPROM*/
+ if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) !=
+ (EEPROM_OK|EEPROM_PRESENT))
+ printk(KERN_WARNING "cs89x0: Extended EEPROM checksum bad and no Cirrus EEPROM, relying on command line\n");
+
+ } else {
+ /* This reads an extended EEPROM that is not documented
+ in the CS8900 datasheet. */
+
+ /* get transmission control word but keep the autonegotiation bits */
+ if (!lp->auto_neg_cnf) lp->auto_neg_cnf = eeprom_buff[AUTO_NEG_CNF_OFFSET/2];
+ /* Store adapter configuration */
+ if (!lp->adapter_cnf) lp->adapter_cnf = eeprom_buff[ADAPTER_CNF_OFFSET/2];
+ /* Store ISA configuration */
+ lp->isa_config = eeprom_buff[ISA_CNF_OFFSET/2];
+ dev->mem_start = eeprom_buff[PACKET_PAGE_OFFSET/2] << 8;
+
+ /* eeprom_buff has 32-bit ints, so we can't just memcpy it */
+ /* store the initial memory base address */
+ for (i = 0; i < ETH_ALEN/2; i++) {
+ dev->dev_addr[i*2] = eeprom_buff[i];
+ dev->dev_addr[i*2+1] = eeprom_buff[i] >> 8;
+ }
+ if (net_debug > 1)
+ printk(KERN_DEBUG "%s: new adapter_cnf: 0x%x\n",
+ dev->name, lp->adapter_cnf);
+ }
+
+ /* allow them to force multiple transceivers. If they force multiple, autosense */
+ {
+ int count = 0;
+ if (lp->force & FORCE_RJ45) {lp->adapter_cnf |= A_CNF_10B_T; count++; }
+ if (lp->force & FORCE_AUI) {lp->adapter_cnf |= A_CNF_AUI; count++; }
+ if (lp->force & FORCE_BNC) {lp->adapter_cnf |= A_CNF_10B_2; count++; }
+ if (count > 1) {lp->adapter_cnf |= A_CNF_MEDIA_AUTO; }
+ else if (lp->force & FORCE_RJ45){lp->adapter_cnf |= A_CNF_MEDIA_10B_T; }
+ else if (lp->force & FORCE_AUI) {lp->adapter_cnf |= A_CNF_MEDIA_AUI; }
+ else if (lp->force & FORCE_BNC) {lp->adapter_cnf |= A_CNF_MEDIA_10B_2; }
+ }
+
+ if (net_debug > 1)
+ printk(KERN_DEBUG "%s: after force 0x%x, adapter_cnf=0x%x\n",
+ dev->name, lp->force, lp->adapter_cnf);
+
+ /* FIXME: We don't let you set dc-dc polarity or low RX squelch from the command line: add it here */
+
+ /* FIXME: We don't let you set the IMM bit from the command line: add it to lp->auto_neg_cnf here */
+
+ /* FIXME: we don't set the Ethernet address on the command line. Use
+ ifconfig IFACE hw ether AABBCCDDEEFF */
+
+ printk(KERN_INFO "cs89x0 media %s%s%s",
+ (lp->adapter_cnf & A_CNF_10B_T)?"RJ-45,":"",
+ (lp->adapter_cnf & A_CNF_AUI)?"AUI,":"",
+ (lp->adapter_cnf & A_CNF_10B_2)?"BNC,":"");
+
+ lp->irq_map = 0xffff;
+
+ /* If this is a CS8900 then no pnp soft */
+ if (lp->chip_type != CS8900 &&
+ /* Check if the ISA IRQ has been set */
+ (i = readreg(dev, PP_CS8920_ISAINT) & 0xff,
+ (i != 0 && i < CS8920_NO_INTS))) {
+ if (!dev->irq)
+ dev->irq = i;
+ } else {
+ i = lp->isa_config & INT_NO_MASK;
+ if (lp->chip_type == CS8900) {
+#ifdef CONFIG_ARCH_IXDP2X01
+ i = cs8900_irq_map[0];
+#else
+ /* Translate the IRQ using the IRQ mapping table. */
+ if (i >= sizeof(cs8900_irq_map)/sizeof(cs8900_irq_map[0]))
+ printk("\ncs89x0: invalid ISA interrupt number %d\n", i);
+ else
+ i = cs8900_irq_map[i];
+
+ lp->irq_map = CS8900_IRQ_MAP; /* fixed IRQ map for CS8900 */
+ } else {
+ int irq_map_buff[IRQ_MAP_LEN/2];
+
+ if (get_eeprom_data(dev, IRQ_MAP_EEPROM_DATA,
+ IRQ_MAP_LEN/2,
+ irq_map_buff) >= 0) {
+ if ((irq_map_buff[0] & 0xff) == PNP_IRQ_FRMT)
+ lp->irq_map = (irq_map_buff[0]>>8) | (irq_map_buff[1] << 8);
+ }
+#endif
+ }
+ if (!dev->irq)
+ dev->irq = i;
+ }
+
+ printk(" IRQ %d", dev->irq);
+
+#if ALLOW_DMA
+ if (lp->use_dma) {
+ get_dma_channel(dev);
+ printk(", DMA %d", dev->dma);
+ }
+ else
+#endif
+ {
+ printk(", programmed I/O");
+ }
+
+ /* print the ethernet address. */
+ printk(", MAC");
+ for (i = 0; i < ETH_ALEN; i++)
+ {
+ printk("%c%02x", i ? ':' : ' ', dev->dev_addr[i]);
+ }
+
+ dev->open = net_open;
+ dev->stop = net_close;
+ dev->tx_timeout = net_timeout;
+ dev->watchdog_timeo = HZ;
+ dev->hard_start_xmit = net_send_packet;
+ dev->get_stats = net_get_stats;
+ dev->set_multicast_list = set_multicast_list;
+ dev->set_mac_address = set_mac_address;
+
+ printk("\n");
+ if (net_debug)
+ printk("cs89x0_probe1() successful\n");
+ return 0;
+out2:
+ release_region(ioaddr & ~3, NETCARD_IO_EXTENT);
+out1:
+ return retval;
+}
+
+
+/*********************************
+ * This page contains DMA routines
+**********************************/
+
+#if ALLOW_DMA
+
+#define dma_page_eq(ptr1, ptr2) ((long)(ptr1)>>17 == (long)(ptr2)>>17)
+
+static void
+get_dma_channel(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+
+ if (lp->dma) {
+ dev->dma = lp->dma;
+ lp->isa_config |= ISA_RxDMA;
+ } else {
+ if ((lp->isa_config & ANY_ISA_DMA) == 0)
+ return;
+ dev->dma = lp->isa_config & DMA_NO_MASK;
+ if (lp->chip_type == CS8900)
+ dev->dma += 5;
+ if (dev->dma < 5 || dev->dma > 7) {
+ lp->isa_config &= ~ANY_ISA_DMA;
+ return;
+ }
+ }
+ return;
+}
+
+static void
+write_dma(struct net_device *dev, int chip_type, int dma)
+{
+ struct net_local *lp = netdev_priv(dev);
+ if ((lp->isa_config & ANY_ISA_DMA) == 0)
+ return;
+ if (chip_type == CS8900) {
+ writereg(dev, PP_CS8900_ISADMA, dma-5);
+ } else {
+ writereg(dev, PP_CS8920_ISADMA, dma);
+ }
+}
+
+static void
+set_dma_cfg(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+
+ if (lp->use_dma) {
+ if ((lp->isa_config & ANY_ISA_DMA) == 0) {
+ if (net_debug > 3)
+ printk("set_dma_cfg(): no DMA\n");
+ return;
+ }
+ if (lp->isa_config & ISA_RxDMA) {
+ lp->curr_rx_cfg |= RX_DMA_ONLY;
+ if (net_debug > 3)
+ printk("set_dma_cfg(): RX_DMA_ONLY\n");
+ } else {
+ lp->curr_rx_cfg |= AUTO_RX_DMA; /* not that we support it... */
+ if (net_debug > 3)
+ printk("set_dma_cfg(): AUTO_RX_DMA\n");
+ }
+ }
+}
+
+static int
+dma_bufcfg(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+ if (lp->use_dma)
+ return (lp->isa_config & ANY_ISA_DMA)? RX_DMA_ENBL : 0;
+ else
+ return 0;
+}
+
+static int
+dma_busctl(struct net_device *dev)
+{
+ int retval = 0;
+ struct net_local *lp = netdev_priv(dev);
+ if (lp->use_dma) {
+ if (lp->isa_config & ANY_ISA_DMA)
+ retval |= RESET_RX_DMA; /* Reset the DMA pointer */
+ if (lp->isa_config & DMA_BURST)
+ retval |= DMA_BURST_MODE; /* Does ISA config specify DMA burst ? */
+ if (lp->dmasize == 64)
+ retval |= RX_DMA_SIZE_64K; /* did they ask for 64K? */
+ retval |= MEMORY_ON; /* we need memory enabled to use DMA. */
+ }
+ return retval;
+}
+
+static void
+dma_rx(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+ struct sk_buff *skb;
+ int status, length;
+ unsigned char *bp = lp->rx_dma_ptr;
+
+ status = bp[0] + (bp[1]<<8);
+ length = bp[2] + (bp[3]<<8);
+ bp += 4;
+ if (net_debug > 5) {
+ printk( "%s: receiving DMA packet at %lx, status %x, length %x\n",
+ dev->name, (unsigned long)bp, status, length);
+ }
+ if ((status & RX_OK) == 0) {
+ count_rx_errors(status, lp);
+ goto skip_this_frame;
+ }
+
+ /* Malloc up new buffer. */
+ skb = dev_alloc_skb(length + 2);
+ if (skb == NULL) {
+ if (net_debug) /* I don't think we want to do this to a stressed system */
+ printk("%s: Memory squeeze, dropping packet.\n", dev->name);
+ lp->stats.rx_dropped++;
+
+ /* AKPM: advance bp to the next frame */
+skip_this_frame:
+ bp += (length + 3) & ~3;
+ if (bp >= lp->end_dma_buff) bp -= lp->dmasize*1024;
+ lp->rx_dma_ptr = bp;
+ return;
+ }
+ skb_reserve(skb, 2); /* longword align L3 header */
+ skb->dev = dev;
+
+ if (bp + length > lp->end_dma_buff) {
+ int semi_cnt = lp->end_dma_buff - bp;
+ memcpy(skb_put(skb,semi_cnt), bp, semi_cnt);
+ memcpy(skb_put(skb,length - semi_cnt), lp->dma_buff,
+ length - semi_cnt);
+ } else {
+ memcpy(skb_put(skb,length), bp, length);
+ }
+ bp += (length + 3) & ~3;
+ if (bp >= lp->end_dma_buff) bp -= lp->dmasize*1024;
+ lp->rx_dma_ptr = bp;
+
+ if (net_debug > 3) {
+ printk( "%s: received %d byte DMA packet of type %x\n",
+ dev->name, length,
+ (skb->data[ETH_ALEN+ETH_ALEN] << 8) | skb->data[ETH_ALEN+ETH_ALEN+1]);
+ }
+ skb->protocol=eth_type_trans(skb,dev);
+ netif_rx(skb);
+ dev->last_rx = jiffies;
+ lp->stats.rx_packets++;
+ lp->stats.rx_bytes += length;
+}
+
+#endif /* ALLOW_DMA */
+
+void __init reset_chip(struct net_device *dev)
+{
+#ifndef CONFIG_ARCH_IXDP2X01
+ struct net_local *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+#endif
+ int reset_start_time;
+
+ writereg(dev, PP_SelfCTL, readreg(dev, PP_SelfCTL) | POWER_ON_RESET);
+
+ /* wait 30 ms */
+ msleep(30);
+
+#ifndef CONFIG_ARCH_IXDP2X01
+ if (lp->chip_type != CS8900) {
+ /* Hardware problem requires PNP registers to be reconfigured after a reset */
+ outw(PP_CS8920_ISAINT, ioaddr + ADD_PORT);
+ outb(dev->irq, ioaddr + DATA_PORT);
+ outb(0, ioaddr + DATA_PORT + 1);
+
+ outw(PP_CS8920_ISAMemB, ioaddr + ADD_PORT);
+ outb((dev->mem_start >> 16) & 0xff, ioaddr + DATA_PORT);
+ outb((dev->mem_start >> 8) & 0xff, ioaddr + DATA_PORT + 1);
+ }
+#endif /* IXDP2x01 */
+
+ /* Wait until the chip is reset */
+ reset_start_time = jiffies;
+ while( (readreg(dev, PP_SelfST) & INIT_DONE) == 0 && jiffies - reset_start_time < 2)
+ ;
+}
+
+
+static void
+control_dc_dc(struct net_device *dev, int on_not_off)
+{
+ struct net_local *lp = netdev_priv(dev);
+ unsigned int selfcontrol;
+ int timenow = jiffies;
+ /* control the DC to DC convertor in the SelfControl register.
+ Note: This is hooked up to a general purpose pin, might not
+ always be a DC to DC convertor. */
+
+ selfcontrol = HCB1_ENBL; /* Enable the HCB1 bit as an output */
+ if (((lp->adapter_cnf & A_CNF_DC_DC_POLARITY) != 0) ^ on_not_off)
+ selfcontrol |= HCB1;
+ else
+ selfcontrol &= ~HCB1;
+ writereg(dev, PP_SelfCTL, selfcontrol);
+
+ /* Wait for the DC/DC converter to power up - 500ms */
+ while (jiffies - timenow < HZ)
+ ;
+}
+
+#define DETECTED_NONE 0
+#define DETECTED_RJ45H 1
+#define DETECTED_RJ45F 2
+#define DETECTED_AUI 3
+#define DETECTED_BNC 4
+
+static int
+detect_tp(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+ int timenow = jiffies;
+ int fdx;
+
+ if (net_debug > 1) printk("%s: Attempting TP\n", dev->name);
+
+ /* If connected to another full duplex capable 10-Base-T card the link pulses
+ seem to be lost when the auto detect bit in the LineCTL is set.
+ To overcome this the auto detect bit will be cleared whilst testing the
+ 10-Base-T interface. This would not be necessary for the sparrow chip but
+ is simpler to do it anyway. */
+ writereg(dev, PP_LineCTL, lp->linectl &~ AUI_ONLY);
+ control_dc_dc(dev, 0);
+
+ /* Delay for the hardware to work out if the TP cable is present - 150ms */
+ for (timenow = jiffies; jiffies - timenow < 15; )
+ ;
+ if ((readreg(dev, PP_LineST) & LINK_OK) == 0)
+ return DETECTED_NONE;
+
+ if (lp->chip_type == CS8900) {
+ switch (lp->force & 0xf0) {
+#if 0
+ case FORCE_AUTO:
+ printk("%s: cs8900 doesn't autonegotiate\n",dev->name);
+ return DETECTED_NONE;
+#endif
+ /* CS8900 doesn't support AUTO, change to HALF*/
+ case FORCE_AUTO:
+ lp->force &= ~FORCE_AUTO;
+ lp->force |= FORCE_HALF;
+ break;
+ case FORCE_HALF:
+ break;
+ case FORCE_FULL:
+ writereg(dev, PP_TestCTL, readreg(dev, PP_TestCTL) | FDX_8900);
+ break;
+ }
+ fdx = readreg(dev, PP_TestCTL) & FDX_8900;
+ } else {
+ switch (lp->force & 0xf0) {
+ case FORCE_AUTO:
+ lp->auto_neg_cnf = AUTO_NEG_ENABLE;
+ break;
+ case FORCE_HALF:
+ lp->auto_neg_cnf = 0;
+ break;
+ case FORCE_FULL:
+ lp->auto_neg_cnf = RE_NEG_NOW | ALLOW_FDX;
+ break;
+ }
+
+ writereg(dev, PP_AutoNegCTL, lp->auto_neg_cnf & AUTO_NEG_MASK);
+
+ if ((lp->auto_neg_cnf & AUTO_NEG_BITS) == AUTO_NEG_ENABLE) {
+ printk(KERN_INFO "%s: negotiating duplex...\n",dev->name);
+ while (readreg(dev, PP_AutoNegST) & AUTO_NEG_BUSY) {
+ if (jiffies - timenow > 4000) {
+ printk(KERN_ERR "**** Full / half duplex auto-negotiation timed out ****\n");
+ break;
+ }
+ }
+ }
+ fdx = readreg(dev, PP_AutoNegST) & FDX_ACTIVE;
+ }
+ if (fdx)
+ return DETECTED_RJ45F;
+ else
+ return DETECTED_RJ45H;
+}
+
+/* send a test packet - return true if carrier bits are ok */
+static int
+send_test_pkt(struct net_device *dev)
+{
+ char test_packet[] = { 0,0,0,0,0,0, 0,0,0,0,0,0,
+ 0, 46, /* A 46 in network order */
+ 0, 0, /* DSAP=0 & SSAP=0 fields */
+ 0xf3, 0 /* Control (Test Req + P bit set) */ };
+ long timenow = jiffies;
+
+ writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_TX_ON);
+
+ memcpy(test_packet, dev->dev_addr, ETH_ALEN);
+ memcpy(test_packet+ETH_ALEN, dev->dev_addr, ETH_ALEN);
+
+ writeword(dev, TX_CMD_PORT, TX_AFTER_ALL);
+ writeword(dev, TX_LEN_PORT, ETH_ZLEN);
+
+ /* Test to see if the chip has allocated memory for the packet */
+ while (jiffies - timenow < 5)
+ if (readreg(dev, PP_BusST) & READY_FOR_TX_NOW)
+ break;
+ if (jiffies - timenow >= 5)
+ return 0; /* this shouldn't happen */
+
+ /* Write the contents of the packet */
+ outsw(dev->base_addr + TX_FRAME_PORT,test_packet,(ETH_ZLEN+1) >>1);
+
+ if (net_debug > 1) printk("Sending test packet ");
+ /* wait a couple of jiffies for packet to be received */
+ for (timenow = jiffies; jiffies - timenow < 3; )
+ ;
+ if ((readreg(dev, PP_TxEvent) & TX_SEND_OK_BITS) == TX_OK) {
+ if (net_debug > 1) printk("succeeded\n");
+ return 1;
+ }
+ if (net_debug > 1) printk("failed\n");
+ return 0;
+}
+
+
+static int
+detect_aui(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+
+ if (net_debug > 1) printk("%s: Attempting AUI\n", dev->name);
+ control_dc_dc(dev, 0);
+
+ writereg(dev, PP_LineCTL, (lp->linectl &~ AUTO_AUI_10BASET) | AUI_ONLY);
+
+ if (send_test_pkt(dev))
+ return DETECTED_AUI;
+ else
+ return DETECTED_NONE;
+}
+
+static int
+detect_bnc(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+
+ if (net_debug > 1) printk("%s: Attempting BNC\n", dev->name);
+ control_dc_dc(dev, 1);
+
+ writereg(dev, PP_LineCTL, (lp->linectl &~ AUTO_AUI_10BASET) | AUI_ONLY);
+
+ if (send_test_pkt(dev))
+ return DETECTED_BNC;
+ else
+ return DETECTED_NONE;
+}
+
+
+static void
+write_irq(struct net_device *dev, int chip_type, int irq)
+{
+ int i;
+
+ if (chip_type == CS8900) {
+ /* Search the mapping table for the corresponding IRQ pin. */
+ for (i = 0; i != sizeof(cs8900_irq_map)/sizeof(cs8900_irq_map[0]); i++)
+ if (cs8900_irq_map[i] == irq)
+ break;
+ /* Not found */
+ if (i == sizeof(cs8900_irq_map)/sizeof(cs8900_irq_map[0]))
+ i = 3;
+ writereg(dev, PP_CS8900_ISAINT, i);
+ } else {
+ writereg(dev, PP_CS8920_ISAINT, irq);
+ }
+}
+
+/* Open/initialize the board. This is called (in the current kernel)
+ sometime after booting when the 'ifconfig' program is run.
+
+ This routine should set everything up anew at each open, even
+ registers that "should" only need to be set once at boot, so that
+ there is non-reboot way to recover if something goes wrong.
+ */
+
+/* AKPM: do we need to do any locking here? */
+
+static int
+net_open(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+ int result = 0;
+ int i;
+ int ret;
+
+#ifndef CONFIG_SH_HICOSH4 /* uses irq#1, so this won't work */
+ if (dev->irq < 2) {
+ /* Allow interrupts to be generated by the chip */
+/* Cirrus' release had this: */
+#if 0
+ writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL)|ENABLE_IRQ );
+#endif
+/* And 2.3.47 had this: */
+ writereg(dev, PP_BusCTL, ENABLE_IRQ | MEMORY_ON);
+
+ for (i = 2; i < CS8920_NO_INTS; i++) {
+ if ((1 << i) & lp->irq_map) {
+ if (request_irq(i, net_interrupt, 0, dev->name, dev) == 0) {
+ dev->irq = i;
+ write_irq(dev, lp->chip_type, i);
+ /* writereg(dev, PP_BufCFG, GENERATE_SW_INTERRUPT); */
+ break;
+ }
+ }
+ }
+
+ if (i >= CS8920_NO_INTS) {
+ writereg(dev, PP_BusCTL, 0); /* disable interrupts. */
+ printk(KERN_ERR "cs89x0: can't get an interrupt\n");
+ ret = -EAGAIN;
+ goto bad_out;
+ }
+ }
+ else
+#endif
+ {
+#ifndef CONFIG_ARCH_IXDP2X01
+ if (((1 << dev->irq) & lp->irq_map) == 0) {
+ printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
+ dev->name, dev->irq, lp->irq_map);
+ ret = -EAGAIN;
+ goto bad_out;
+ }
+#endif
+/* FIXME: Cirrus' release had this: */
+ writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL)|ENABLE_IRQ );
+/* And 2.3.47 had this: */
+#if 0
+ writereg(dev, PP_BusCTL, ENABLE_IRQ | MEMORY_ON);
+#endif
+ write_irq(dev, lp->chip_type, dev->irq);
+ ret = request_irq(dev->irq, &net_interrupt, 0, dev->name, dev);
+ if (ret) {
+ if (net_debug)
+ printk(KERN_DEBUG "cs89x0: request_irq(%d) failed\n", dev->irq);
+ goto bad_out;
+ }
+ }
+
+#if ALLOW_DMA
+ if (lp->use_dma) {
+ if (lp->isa_config & ANY_ISA_DMA) {
+ unsigned long flags;
+ lp->dma_buff = (unsigned char *)__get_dma_pages(GFP_KERNEL,
+ get_order(lp->dmasize * 1024));
+
+ if (!lp->dma_buff) {
+ printk(KERN_ERR "%s: cannot get %dK memory for DMA\n", dev->name, lp->dmasize);
+ goto release_irq;
+ }
+ if (net_debug > 1) {
+ printk( "%s: dma %lx %lx\n",
+ dev->name,
+ (unsigned long)lp->dma_buff,
+ (unsigned long)isa_virt_to_bus(lp->dma_buff));
+ }
+ if ((unsigned long) lp->dma_buff >= MAX_DMA_ADDRESS ||
+ !dma_page_eq(lp->dma_buff, lp->dma_buff+lp->dmasize*1024-1)) {
+ printk(KERN_ERR "%s: not usable as DMA buffer\n", dev->name);
+ goto release_irq;
+ }
+ memset(lp->dma_buff, 0, lp->dmasize * 1024); /* Why? */
+ if (request_dma(dev->dma, dev->name)) {
+ printk(KERN_ERR "%s: cannot get dma channel %d\n", dev->name, dev->dma);
+ goto release_irq;
+ }
+ write_dma(dev, lp->chip_type, dev->dma);
+ lp->rx_dma_ptr = lp->dma_buff;
+ lp->end_dma_buff = lp->dma_buff + lp->dmasize*1024;
+ spin_lock_irqsave(&lp->lock, flags);
+ disable_dma(dev->dma);
+ clear_dma_ff(dev->dma);
+ set_dma_mode(dev->dma, 0x14); /* auto_init as well */
+ set_dma_addr(dev->dma, isa_virt_to_bus(lp->dma_buff));
+ set_dma_count(dev->dma, lp->dmasize*1024);
+ enable_dma(dev->dma);
+ spin_unlock_irqrestore(&lp->lock, flags);
+ }
+ }
+#endif /* ALLOW_DMA */
+
+ /* set the Ethernet address */
+ for (i=0; i < ETH_ALEN/2; i++)
+ writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
+
+ /* while we're testing the interface, leave interrupts disabled */
+ writereg(dev, PP_BusCTL, MEMORY_ON);
+
+ /* Set the LineCTL quintuplet based on adapter configuration read from EEPROM */
+ if ((lp->adapter_cnf & A_CNF_EXTND_10B_2) && (lp->adapter_cnf & A_CNF_LOW_RX_SQUELCH))
+ lp->linectl = LOW_RX_SQUELCH;
+ else
+ lp->linectl = 0;
+
+ /* check to make sure that they have the "right" hardware available */
+ switch(lp->adapter_cnf & A_CNF_MEDIA_TYPE) {
+ case A_CNF_MEDIA_10B_T: result = lp->adapter_cnf & A_CNF_10B_T; break;
+ case A_CNF_MEDIA_AUI: result = lp->adapter_cnf & A_CNF_AUI; break;
+ case A_CNF_MEDIA_10B_2: result = lp->adapter_cnf & A_CNF_10B_2; break;
+ default: result = lp->adapter_cnf & (A_CNF_10B_T | A_CNF_AUI | A_CNF_10B_2);
+ }
+ if (!result) {
+ printk(KERN_ERR "%s: EEPROM is configured for unavailable media\n", dev->name);
+ release_irq:
+#if ALLOW_DMA
+ release_dma_buff(lp);
+#endif
+ writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) & ~(SERIAL_TX_ON | SERIAL_RX_ON));
+ free_irq(dev->irq, dev);
+ ret = -EAGAIN;
+ goto bad_out;
+ }
+
+ /* set the hardware to the configured choice */
+ switch(lp->adapter_cnf & A_CNF_MEDIA_TYPE) {
+ case A_CNF_MEDIA_10B_T:
+ result = detect_tp(dev);
+ if (result==DETECTED_NONE) {
+ printk(KERN_WARNING "%s: 10Base-T (RJ-45) has no cable\n", dev->name);
+ if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */
+ result = DETECTED_RJ45H; /* Yes! I don't care if I see a link pulse */
+ }
+ break;
+ case A_CNF_MEDIA_AUI:
+ result = detect_aui(dev);
+ if (result==DETECTED_NONE) {
+ printk(KERN_WARNING "%s: 10Base-5 (AUI) has no cable\n", dev->name);
+ if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */
+ result = DETECTED_AUI; /* Yes! I don't care if I see a carrrier */
+ }
+ break;
+ case A_CNF_MEDIA_10B_2:
+ result = detect_bnc(dev);
+ if (result==DETECTED_NONE) {
+ printk(KERN_WARNING "%s: 10Base-2 (BNC) has no cable\n", dev->name);
+ if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */
+ result = DETECTED_BNC; /* Yes! I don't care if I can xmit a packet */
+ }
+ break;
+ case A_CNF_MEDIA_AUTO:
+ writereg(dev, PP_LineCTL, lp->linectl | AUTO_AUI_10BASET);
+ if (lp->adapter_cnf & A_CNF_10B_T)
+ if ((result = detect_tp(dev)) != DETECTED_NONE)
+ break;
+ if (lp->adapter_cnf & A_CNF_AUI)
+ if ((result = detect_aui(dev)) != DETECTED_NONE)
+ break;
+ if (lp->adapter_cnf & A_CNF_10B_2)
+ if ((result = detect_bnc(dev)) != DETECTED_NONE)
+ break;
+ printk(KERN_ERR "%s: no media detected\n", dev->name);
+ goto release_irq;
+ }
+ switch(result) {
+ case DETECTED_NONE:
+ printk(KERN_ERR "%s: no network cable attached to configured media\n", dev->name);
+ goto release_irq;
+ case DETECTED_RJ45H:
+ printk(KERN_INFO "%s: using half-duplex 10Base-T (RJ-45)\n", dev->name);
+ break;
+ case DETECTED_RJ45F:
+ printk(KERN_INFO "%s: using full-duplex 10Base-T (RJ-45)\n", dev->name);
+ break;
+ case DETECTED_AUI:
+ printk(KERN_INFO "%s: using 10Base-5 (AUI)\n", dev->name);
+ break;
+ case DETECTED_BNC:
+ printk(KERN_INFO "%s: using 10Base-2 (BNC)\n", dev->name);
+ break;
+ }
+
+ /* Turn on both receive and transmit operations */
+ writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_RX_ON | SERIAL_TX_ON);
+
+ /* Receive only error free packets addressed to this card */
+ lp->rx_mode = 0;
+ writereg(dev, PP_RxCTL, DEF_RX_ACCEPT);
+
+ lp->curr_rx_cfg = RX_OK_ENBL | RX_CRC_ERROR_ENBL;
+
+ if (lp->isa_config & STREAM_TRANSFER)
+ lp->curr_rx_cfg |= RX_STREAM_ENBL;
+#if ALLOW_DMA
+ set_dma_cfg(dev);
+#endif
+ writereg(dev, PP_RxCFG, lp->curr_rx_cfg);
+
+ writereg(dev, PP_TxCFG, TX_LOST_CRS_ENBL | TX_SQE_ERROR_ENBL | TX_OK_ENBL |
+ TX_LATE_COL_ENBL | TX_JBR_ENBL | TX_ANY_COL_ENBL | TX_16_COL_ENBL);
+
+ writereg(dev, PP_BufCFG, READY_FOR_TX_ENBL | RX_MISS_COUNT_OVRFLOW_ENBL |
+#if ALLOW_DMA
+ dma_bufcfg(dev) |
+#endif
+ TX_COL_COUNT_OVRFLOW_ENBL | TX_UNDERRUN_ENBL);
+
+ /* now that we've got our act together, enable everything */
+ writereg(dev, PP_BusCTL, ENABLE_IRQ
+ | (dev->mem_start?MEMORY_ON : 0) /* turn memory on */
+#if ALLOW_DMA
+ | dma_busctl(dev)
+#endif
+ );
+ netif_start_queue(dev);
+ if (net_debug > 1)
+ printk("cs89x0: net_open() succeeded\n");
+ return 0;
+bad_out:
+ return ret;
+}
+
+static void net_timeout(struct net_device *dev)
+{
+ /* If we get here, some higher level has decided we are broken.
+ There should really be a "kick me" function call instead. */
+ if (net_debug > 0) printk("%s: transmit timed out, %s?\n", dev->name,
+ tx_done(dev) ? "IRQ conflict ?" : "network cable problem");
+ /* Try to restart the adaptor. */
+ netif_wake_queue(dev);
+}
+
+static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+
+ if (net_debug > 3) {
+ printk("%s: sent %d byte packet of type %x\n",
+ dev->name, skb->len,
+ (skb->data[ETH_ALEN+ETH_ALEN] << 8) | skb->data[ETH_ALEN+ETH_ALEN+1]);
+ }
+
+ /* keep the upload from being interrupted, since we
+ ask the chip to start transmitting before the
+ whole packet has been completely uploaded. */
+
+ spin_lock_irq(&lp->lock);
+ netif_stop_queue(dev);
+
+ /* initiate a transmit sequence */
+ writeword(dev, TX_CMD_PORT, lp->send_cmd);
+ writeword(dev, TX_LEN_PORT, skb->len);
+
+ /* Test to see if the chip has allocated memory for the packet */
+ if ((readreg(dev, PP_BusST) & READY_FOR_TX_NOW) == 0) {
+ /*
+ * Gasp! It hasn't. But that shouldn't happen since
+ * we're waiting for TxOk, so return 1 and requeue this packet.
+ */
+
+ spin_unlock_irq(&lp->lock);
+ if (net_debug) printk("cs89x0: Tx buffer not free!\n");
+ return 1;
+ }
+ /* Write the contents of the packet */
+ outsw(dev->base_addr + TX_FRAME_PORT,skb->data,(skb->len+1) >>1);
+ spin_unlock_irq(&lp->lock);
+ dev->trans_start = jiffies;
+ dev_kfree_skb (skb);
+
+ /*
+ * We DO NOT call netif_wake_queue() here.
+ * We also DO NOT call netif_start_queue().
+ *
+ * Either of these would cause another bottom half run through
+ * net_send_packet() before this packet has fully gone out. That causes
+ * us to hit the "Gasp!" above and the send is rescheduled. it runs like
+ * a dog. We just return and wait for the Tx completion interrupt handler
+ * to restart the netdevice layer
+ */
+
+ return 0;
+}
+
+/* The typical workload of the driver:
+ Handle the network interface interrupts. */
+
+static irqreturn_t net_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+{
+ struct net_device *dev = dev_id;
+ struct net_local *lp;
+ int ioaddr, status;
+ int handled = 0;
+
+ ioaddr = dev->base_addr;
+ lp = netdev_priv(dev);
+
+ /* we MUST read all the events out of the ISQ, otherwise we'll never
+ get interrupted again. As a consequence, we can't have any limit
+ on the number of times we loop in the interrupt handler. The
+ hardware guarantees that eventually we'll run out of events. Of
+ course, if you're on a slow machine, and packets are arriving
+ faster than you can read them off, you're screwed. Hasta la
+ vista, baby! */
+ while ((status = readword(dev, ISQ_PORT))) {
+ if (net_debug > 4)printk("%s: event=%04x\n", dev->name, status);
+ handled = 1;
+ switch(status & ISQ_EVENT_MASK) {
+ case ISQ_RECEIVER_EVENT:
+ /* Got a packet(s). */
+ net_rx(dev);
+ break;
+ case ISQ_TRANSMITTER_EVENT:
+ lp->stats.tx_packets++;
+ netif_wake_queue(dev); /* Inform upper layers. */
+ if ((status & ( TX_OK |
+ TX_LOST_CRS |
+ TX_SQE_ERROR |
+ TX_LATE_COL |
+ TX_16_COL)) != TX_OK) {
+ if ((status & TX_OK) == 0) lp->stats.tx_errors++;
+ if (status & TX_LOST_CRS) lp->stats.tx_carrier_errors++;
+ if (status & TX_SQE_ERROR) lp->stats.tx_heartbeat_errors++;
+ if (status & TX_LATE_COL) lp->stats.tx_window_errors++;
+ if (status & TX_16_COL) lp->stats.tx_aborted_errors++;
+ }
+ break;
+ case ISQ_BUFFER_EVENT:
+ if (status & READY_FOR_TX) {
+ /* we tried to transmit a packet earlier,
+ but inexplicably ran out of buffers.
+ That shouldn't happen since we only ever
+ load one packet. Shrug. Do the right
+ thing anyway. */
+ netif_wake_queue(dev); /* Inform upper layers. */
+ }
+ if (status & TX_UNDERRUN) {
+ if (net_debug > 0) printk("%s: transmit underrun\n", dev->name);
+ lp->send_underrun++;
+ if (lp->send_underrun == 3) lp->send_cmd = TX_AFTER_381;
+ else if (lp->send_underrun == 6) lp->send_cmd = TX_AFTER_ALL;
+ /* transmit cycle is done, although
+ frame wasn't transmitted - this
+ avoids having to wait for the upper
+ layers to timeout on us, in the
+ event of a tx underrun */
+ netif_wake_queue(dev); /* Inform upper layers. */
+ }
+#if ALLOW_DMA
+ if (lp->use_dma && (status & RX_DMA)) {
+ int count = readreg(dev, PP_DmaFrameCnt);
+ while(count) {
+ if (net_debug > 5)
+ printk("%s: receiving %d DMA frames\n", dev->name, count);
+ if (net_debug > 2 && count >1)
+ printk("%s: receiving %d DMA frames\n", dev->name, count);
+ dma_rx(dev);
+ if (--count == 0)
+ count = readreg(dev, PP_DmaFrameCnt);
+ if (net_debug > 2 && count > 0)
+ printk("%s: continuing with %d DMA frames\n", dev->name, count);
+ }
+ }
+#endif
+ break;
+ case ISQ_RX_MISS_EVENT:
+ lp->stats.rx_missed_errors += (status >>6);
+ break;
+ case ISQ_TX_COL_EVENT:
+ lp->stats.collisions += (status >>6);
+ break;
+ }
+ }
+ return IRQ_RETVAL(handled);
+}
+
+static void
+count_rx_errors(int status, struct net_local *lp)
+{
+ lp->stats.rx_errors++;
+ if (status & RX_RUNT) lp->stats.rx_length_errors++;
+ if (status & RX_EXTRA_DATA) lp->stats.rx_length_errors++;
+ if (status & RX_CRC_ERROR) if (!(status & (RX_EXTRA_DATA|RX_RUNT)))
+ /* per str 172 */
+ lp->stats.rx_crc_errors++;
+ if (status & RX_DRIBBLE) lp->stats.rx_frame_errors++;
+ return;
+}
+
+/* We have a good packet(s), get it/them out of the buffers. */
+static void
+net_rx(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+ struct sk_buff *skb;
+ int status, length;
+
+ int ioaddr = dev->base_addr;
+ status = inw(ioaddr + RX_FRAME_PORT);
+ length = inw(ioaddr + RX_FRAME_PORT);
+
+ if ((status & RX_OK) == 0) {
+ count_rx_errors(status, lp);
+ return;
+ }
+
+ /* Malloc up new buffer. */
+ skb = dev_alloc_skb(length + 2);
+ if (skb == NULL) {
+#if 0 /* Again, this seems a cruel thing to do */
+ printk(KERN_WARNING "%s: Memory squeeze, dropping packet.\n", dev->name);
+#endif
+ lp->stats.rx_dropped++;
+ return;
+ }
+ skb_reserve(skb, 2); /* longword align L3 header */
+ skb->dev = dev;
+
+ insw(ioaddr + RX_FRAME_PORT, skb_put(skb, length), length >> 1);
+ if (length & 1)
+ skb->data[length-1] = inw(ioaddr + RX_FRAME_PORT);
+
+ if (net_debug > 3) {
+ printk( "%s: received %d byte packet of type %x\n",
+ dev->name, length,
+ (skb->data[ETH_ALEN+ETH_ALEN] << 8) | skb->data[ETH_ALEN+ETH_ALEN+1]);
+ }
+
+ skb->protocol=eth_type_trans(skb,dev);
+ netif_rx(skb);
+ dev->last_rx = jiffies;
+ lp->stats.rx_packets++;
+ lp->stats.rx_bytes += length;
+}
+
+#if ALLOW_DMA
+static void release_dma_buff(struct net_local *lp)
+{
+ if (lp->dma_buff) {
+ free_pages((unsigned long)(lp->dma_buff), get_order(lp->dmasize * 1024));
+ lp->dma_buff = NULL;
+ }
+}
+#endif
+
+/* The inverse routine to net_open(). */
+static int
+net_close(struct net_device *dev)
+{
+#if ALLOW_DMA
+ struct net_local *lp = netdev_priv(dev);
+#endif
+
+ netif_stop_queue(dev);
+
+ writereg(dev, PP_RxCFG, 0);
+ writereg(dev, PP_TxCFG, 0);
+ writereg(dev, PP_BufCFG, 0);
+ writereg(dev, PP_BusCTL, 0);
+
+ free_irq(dev->irq, dev);
+
+#if ALLOW_DMA
+ if (lp->use_dma && lp->dma) {
+ free_dma(dev->dma);
+ release_dma_buff(lp);
+ }
+#endif
+
+ /* Update the statistics here. */
+ return 0;
+}
+
+/* Get the current statistics. This may be called with the card open or
+ closed. */
+static struct net_device_stats *
+net_get_stats(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&lp->lock, flags);
+ /* Update the statistics from the device registers. */
+ lp->stats.rx_missed_errors += (readreg(dev, PP_RxMiss) >> 6);
+ lp->stats.collisions += (readreg(dev, PP_TxCol) >> 6);
+ spin_unlock_irqrestore(&lp->lock, flags);
+
+ return &lp->stats;
+}
+
+static void set_multicast_list(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&lp->lock, flags);
+ if(dev->flags&IFF_PROMISC)
+ {
+ lp->rx_mode = RX_ALL_ACCEPT;
+ }
+ else if((dev->flags&IFF_ALLMULTI)||dev->mc_list)
+ {
+ /* The multicast-accept list is initialized to accept-all, and we
+ rely on higher-level filtering for now. */
+ lp->rx_mode = RX_MULTCAST_ACCEPT;
+ }
+ else
+ lp->rx_mode = 0;
+
+ writereg(dev, PP_RxCTL, DEF_RX_ACCEPT | lp->rx_mode);
+
+ /* in promiscuous mode, we accept errored packets, so we have to enable interrupts on them also */
+ writereg(dev, PP_RxCFG, lp->curr_rx_cfg |
+ (lp->rx_mode == RX_ALL_ACCEPT? (RX_CRC_ERROR_ENBL|RX_RUNT_ENBL|RX_EXTRA_DATA_ENBL) : 0));
+ spin_unlock_irqrestore(&lp->lock, flags);
+}
+
+
+static int set_mac_address(struct net_device *dev, void *p)
+{
+ int i;
+ struct sockaddr *addr = p;
+
+
+ if (netif_running(dev))
+ return -EBUSY;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+ if (net_debug) {
+ printk("%s: Setting MAC address to ", dev->name);
+ for (i = 0; i < dev->addr_len; i++)
+ printk(" %2.2x", dev->dev_addr[i]);
+ printk(".\n");
+ }
+ /* set the Ethernet address */
+ for (i=0; i < ETH_ALEN/2; i++)
+ writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
+
+ return 0;
+}
+
+#ifdef MODULE
+
+static struct net_device *dev_cs89x0;
+
+/*
+ * Support the 'debug' module parm even if we're compiled for non-debug to
+ * avoid breaking someone's startup scripts
+ */
+
+static int io;
+static int irq;
+static int debug;
+static char media[8];
+static int duplex=-1;
+
+static int use_dma; /* These generate unused var warnings if ALLOW_DMA = 0 */
+static int dma;
+static int dmasize=16; /* or 64 */
+
+module_param(io, int, 0);
+module_param(irq, int, 0);
+module_param(debug, int, 0);
+module_param_string(media, media, sizeof(media), 0);
+module_param(duplex, int, 0);
+module_param(dma , int, 0);
+module_param(dmasize , int, 0);
+module_param(use_dma , int, 0);
+MODULE_PARM_DESC(io, "cs89x0 I/O base address");
+MODULE_PARM_DESC(irq, "cs89x0 IRQ number");
+#if DEBUGGING
+MODULE_PARM_DESC(debug, "cs89x0 debug level (0-6)");
+#else
+MODULE_PARM_DESC(debug, "(ignored)");
+#endif
+MODULE_PARM_DESC(media, "Set cs89x0 adapter(s) media type(s) (rj45,bnc,aui)");
+/* No other value than -1 for duplex seems to be currently interpreted */
+MODULE_PARM_DESC(duplex, "(ignored)");
+#if ALLOW_DMA
+MODULE_PARM_DESC(dma , "cs89x0 ISA DMA channel; ignored if use_dma=0");
+MODULE_PARM_DESC(dmasize , "cs89x0 DMA size in kB (16,64); ignored if use_dma=0");
+MODULE_PARM_DESC(use_dma , "cs89x0 using DMA (0-1)");
+#else
+MODULE_PARM_DESC(dma , "(ignored)");
+MODULE_PARM_DESC(dmasize , "(ignored)");
+MODULE_PARM_DESC(use_dma , "(ignored)");
+#endif
+
+MODULE_AUTHOR("Mike Cruse, Russwll Nelson <nelson@crynwr.com>, Andrew Morton <andrewm@uow.edu.au>");
+MODULE_LICENSE("GPL");
+
+
+/*
+* media=t - specify media type
+ or media=2
+ or media=aui
+ or medai=auto
+* duplex=0 - specify forced half/full/autonegotiate duplex
+* debug=# - debug level
+
+
+* Default Chip Configuration:
+ * DMA Burst = enabled
+ * IOCHRDY Enabled = enabled
+ * UseSA = enabled
+ * CS8900 defaults to half-duplex if not specified on command-line
+ * CS8920 defaults to autoneg if not specified on command-line
+ * Use reset defaults for other config parameters
+
+* Assumptions:
+ * media type specified is supported (circuitry is present)
+ * if memory address is > 1MB, then required mem decode hw is present
+ * if 10B-2, then agent other than driver will enable DC/DC converter
+ (hw or software util)
+
+
+*/
+
+int
+init_module(void)
+{
+ struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
+ struct net_local *lp;
+ int ret = 0;
+
+#if DEBUGGING
+ net_debug = debug;
+#else
+ debug = 0;
+#endif
+ if (!dev)
+ return -ENOMEM;
+
+ dev->irq = irq;
+ dev->base_addr = io;
+ lp = netdev_priv(dev);
+
+#if ALLOW_DMA
+ if (use_dma) {
+ lp->use_dma = use_dma;
+ lp->dma = dma;
+ lp->dmasize = dmasize;
+ }
+#endif
+
+ spin_lock_init(&lp->lock);
+
+ /* boy, they'd better get these right */
+ if (!strcmp(media, "rj45"))
+ lp->adapter_cnf = A_CNF_MEDIA_10B_T | A_CNF_10B_T;
+ else if (!strcmp(media, "aui"))
+ lp->adapter_cnf = A_CNF_MEDIA_AUI | A_CNF_AUI;
+ else if (!strcmp(media, "bnc"))
+ lp->adapter_cnf = A_CNF_MEDIA_10B_2 | A_CNF_10B_2;
+ else
+ lp->adapter_cnf = A_CNF_MEDIA_10B_T | A_CNF_10B_T;
+
+ if (duplex==-1)
+ lp->auto_neg_cnf = AUTO_NEG_ENABLE;
+
+ if (io == 0) {
+ printk(KERN_ERR "cs89x0.c: Module autoprobing not allowed.\n");
+ printk(KERN_ERR "cs89x0.c: Append io=0xNNN\n");
+ ret = -EPERM;
+ goto out;
+ } else if (io <= 0x1ff) {
+ ret = -ENXIO;
+ goto out;
+ }
+
+#if ALLOW_DMA
+ if (use_dma && dmasize != 16 && dmasize != 64) {
+ printk(KERN_ERR "cs89x0.c: dma size must be either 16K or 64K, not %dK\n", dmasize);
+ ret = -EPERM;
+ goto out;
+ }
+#endif
+ ret = cs89x0_probe1(dev, io, 1);
+ if (ret)
+ goto out;
+
+ if (register_netdev(dev) != 0) {
+ printk(KERN_ERR "cs89x0.c: No card found at 0x%x\n", io);
+ ret = -ENXIO;
+ outw(PP_ChipID, dev->base_addr + ADD_PORT);
+ release_region(dev->base_addr, NETCARD_IO_EXTENT);
+ goto out;
+ }
+ dev_cs89x0 = dev;
+ return 0;
+out:
+ free_netdev(dev);
+ return ret;
+}
+
+void
+cleanup_module(void)
+{
+ unregister_netdev(dev_cs89x0);
+ outw(PP_ChipID, dev_cs89x0->base_addr + ADD_PORT);
+ release_region(dev_cs89x0->base_addr, NETCARD_IO_EXTENT);
+ free_netdev(dev_cs89x0);
+}
+#endif /* MODULE */
+
+/*
+ * Local variables:
+ * version-control: t
+ * kept-new-versions: 5
+ * c-indent-level: 8
+ * tab-width: 8
+ * End:
+ *
+ */