e1000: consolidate managability enabling/disabling

Several bugs existed in how we handle manageability issues all
over the driver.  This patch consolidates all the managability
release and init code in two single functions and call them from
appropriate locations. This fixes several BMC packet redirect issues
and powerup/down hiccups.

Originally from Jesse Brandeburg <jesse.brandeburg@intel.com>, rewritten
to use feature flags by me.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 69 insertions, 59 deletions

diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 0816de267610..7a51283f4939 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -464,6 +464,52 @@ e1000_get_hw_control(struct e1000_adapter *adapter)
 	}
 }
 
+static void
+e1000_init_manageability(struct e1000_adapter *adapter)
+{
+	if (adapter->en_mng_pt) {
+		uint32_t manc = E1000_READ_REG(&adapter->hw, MANC);
+
+		/* disable hardware interception of ARP */
+		manc &= ~(E1000_MANC_ARP_EN);
+
+		/* enable receiving management packets to the host */
+		/* this will probably generate destination unreachable messages
+		 * from the host OS, but the packets will be handled on SMBUS */
+		if (adapter->hw.has_manc2h) {
+			uint32_t manc2h = E1000_READ_REG(&adapter->hw, MANC2H);
+
+			manc |= E1000_MANC_EN_MNG2HOST;
+#define E1000_MNG2HOST_PORT_623 (1 << 5)
+#define E1000_MNG2HOST_PORT_664 (1 << 6)
+			manc2h |= E1000_MNG2HOST_PORT_623;
+			manc2h |= E1000_MNG2HOST_PORT_664;
+			E1000_WRITE_REG(&adapter->hw, MANC2H, manc2h);
+		}
+
+		E1000_WRITE_REG(&adapter->hw, MANC, manc);
+	}
+}
+
+static void
+e1000_release_manageability(struct e1000_adapter *adapter)
+{
+	if (adapter->en_mng_pt) {
+		uint32_t manc = E1000_READ_REG(&adapter->hw, MANC);
+
+		/* re-enable hardware interception of ARP */
+		manc |= E1000_MANC_ARP_EN;
+
+		if (adapter->hw.has_manc2h)
+			manc &= ~E1000_MANC_EN_MNG2HOST;
+
+		/* don't explicitly have to mess with MANC2H since
+		 * MANC has an enable disable that gates MANC2H */
+
+		E1000_WRITE_REG(&adapter->hw, MANC, manc);
+	}
+}
+
 int
 e1000_up(struct e1000_adapter *adapter)
 {
@@ -475,6 +521,7 @@ e1000_up(struct e1000_adapter *adapter)
 	e1000_set_multi(netdev);
 
 	e1000_restore_vlan(adapter);
+	e1000_init_manageability(adapter);
 
 	e1000_configure_tx(adapter);
 	e1000_setup_rctl(adapter);
@@ -614,7 +661,7 @@ e1000_reinit_locked(struct e1000_adapter *adapter)
 void
 e1000_reset(struct e1000_adapter *adapter)
 {
-	uint32_t pba, manc;
+	uint32_t pba;
 	uint16_t fc_high_water_mark = E1000_FC_HIGH_DIFF;
 
 	/* Repartition Pba for greater than 9k mtu
@@ -705,14 +752,7 @@ e1000_reset(struct e1000_adapter *adapter)
 		                    phy_data);
 	}
 
-	if ((adapter->en_mng_pt) &&
-	    (adapter->hw.mac_type >= e1000_82540) &&
-	    (adapter->hw.mac_type < e1000_82571) &&
-	    (adapter->hw.media_type == e1000_media_type_copper)) {
-		manc = E1000_READ_REG(&adapter->hw, MANC);
-		manc |= (E1000_MANC_ARP_EN | E1000_MANC_EN_MNG2HOST);
-		E1000_WRITE_REG(&adapter->hw, MANC, manc);
-	}
+	e1000_release_manageability(adapter);
 }
 
 /**
@@ -1078,22 +1118,13 @@ e1000_remove(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
-	uint32_t manc;
 #ifdef CONFIG_E1000_NAPI
 	int i;
 #endif
 
 	flush_scheduled_work();
 
-	if (adapter->hw.mac_type >= e1000_82540 &&
-	    adapter->hw.mac_type < e1000_82571 &&
-	    adapter->hw.media_type == e1000_media_type_copper) {
-		manc = E1000_READ_REG(&adapter->hw, MANC);
-		if (manc & E1000_MANC_SMBUS_EN) {
-			manc |= E1000_MANC_ARP_EN;
-			E1000_WRITE_REG(&adapter->hw, MANC, manc);
-		}
-	}
+	e1000_release_manageability(adapter);
 
 	/* Release control of h/w to f/w.  If f/w is AMT enabled, this
 	 * would have already happened in close and is redundant. */
@@ -5011,7 +5042,7 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
-	uint32_t ctrl, ctrl_ext, rctl, manc, status;
+	uint32_t ctrl, ctrl_ext, rctl, status;
 	uint32_t wufc = adapter->wol;
 #ifdef CONFIG_PM
 	int retval = 0;
@@ -5080,16 +5111,12 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state)
 		pci_enable_wake(pdev, PCI_D3cold, 0);
 	}
 
-	if (adapter->hw.mac_type >= e1000_82540 &&
-	    adapter->hw.mac_type < e1000_82571 &&
-	    adapter->hw.media_type == e1000_media_type_copper) {
-		manc = E1000_READ_REG(&adapter->hw, MANC);
-		if (manc & E1000_MANC_SMBUS_EN) {
-			manc |= E1000_MANC_ARP_EN;
-			E1000_WRITE_REG(&adapter->hw, MANC, manc);
-			pci_enable_wake(pdev, PCI_D3hot, 1);
-			pci_enable_wake(pdev, PCI_D3cold, 1);
-		}
+	e1000_release_manageability(adapter);
+
+	/* make sure adapter isn't asleep if manageability is enabled */
+	if (adapter->en_mng_pt) {
+		pci_enable_wake(pdev, PCI_D3hot, 1);
+		pci_enable_wake(pdev, PCI_D3cold, 1);
 	}
 
 	if (adapter->hw.phy_type == e1000_phy_igp_3)
@@ -5115,7 +5142,7 @@ e1000_resume(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
-	uint32_t manc, err;
+	uint32_t err;
 
 	pci_set_power_state(pdev, PCI_D0);
 	e1000_pci_restore_state(adapter);
@@ -5135,19 +5162,13 @@ e1000_resume(struct pci_dev *pdev)
 	e1000_reset(adapter);
 	E1000_WRITE_REG(&adapter->hw, WUS, ~0);
 
+	e1000_init_manageability(adapter);
+
 	if (netif_running(netdev))
 		e1000_up(adapter);
 
 	netif_device_attach(netdev);
 
-	if (adapter->hw.mac_type >= e1000_82540 &&
-	    adapter->hw.mac_type < e1000_82571 &&
-	    adapter->hw.media_type == e1000_media_type_copper) {
-		manc = E1000_READ_REG(&adapter->hw, MANC);
-		manc &= ~(E1000_MANC_ARP_EN);
-		E1000_WRITE_REG(&adapter->hw, MANC, manc);
-	}
-
 	/* If the controller is 82573 and f/w is AMT, do not set
 	 * DRV_LOAD until the interface is up.  For all other cases,
 	 * let the f/w know that the h/w is now under the control
@@ -5248,7 +5269,8 @@ static void e1000_io_resume(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev->priv;
-	uint32_t manc, swsm;
+
+	e1000_init_manageability(adapter);
 
 	if (netif_running(netdev)) {
 		if (e1000_up(adapter)) {
@@ -5259,26 +5281,14 @@ static void e1000_io_resume(struct pci_dev *pdev)
 
 	netif_device_attach(netdev);
 
-	if (adapter->hw.mac_type >= e1000_82540 &&
-	    adapter->hw.mac_type < e1000_82571 &&
-	    adapter->hw.media_type == e1000_media_type_copper) {
-		manc = E1000_READ_REG(&adapter->hw, MANC);
-		manc &= ~(E1000_MANC_ARP_EN);
-		E1000_WRITE_REG(&adapter->hw, MANC, manc);
-	}
-
-	switch (adapter->hw.mac_type) {
-	case e1000_82573:
-		swsm = E1000_READ_REG(&adapter->hw, SWSM);
-		E1000_WRITE_REG(&adapter->hw, SWSM,
-				swsm | E1000_SWSM_DRV_LOAD);
-		break;
-	default:
-		break;
-	}
+	/* If the controller is 82573 and f/w is AMT, do not set
+	 * DRV_LOAD until the interface is up.  For all other cases,
+	 * let the f/w know that the h/w is now under the control
+	 * of the driver. */
+	if (adapter->hw.mac_type != e1000_82573 ||
+	    !e1000_check_mng_mode(&adapter->hw))
+		e1000_get_hw_control(adapter);
 
-	if (netif_running(netdev))
-		mod_timer(&adapter->watchdog_timer, jiffies);
 }
 
 /* e1000_main.c */