e1000e: access multiple PHY registers on same page at the same time

Doing a PHY page select can take a long time, relatively speaking. This
can cause a significant delay when updating a number of PHY registers on
the same page by unnecessarily setting the page for each PHY access. For
example when going to Sx, all the PHY wakeup registers (WUC, RAR[], MTA[],
SHRAR[], IP4AT[], IP6AT[], etc.) on 82577/8/9 need to be updated which
takes a long time which can cause issues when suspending.

This patch introduces new PHY ops function pointers to allow callers to
set the page directly and do any number of PHY accesses on that page.
This feature is currently only implemented for 82577, 82578 and 82579
PHYs for both the normally addressed registers as well as the special-
case addressing of the PHY wakeup registers on page 800. For the latter
registers, the existing function for accessing the wakeup registers has
been divided up into three- 1) enable access to the wakeup register page,
2) perform the register access and 3) disable access to the wakeup register
page. The two functions that enable/disable access to the wakeup register
page are necessarily available to the caller so that the caller can restore
the value of the Port Control (a.k.a. Wakeup Enable) register after the
wakeup register accesses are done.

All instances of writing to multiple PHY registers on the same page are
updated to use this new method and to acquire any PHY locking mechanism
before setting the page and performing the register accesses, and release
the locking mechanism afterward.

Some affiliated magic number cleanup is done as well.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 43 insertions, 68 deletions

diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index bc99458e0398..51cf7159b388 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -3833,6 +3833,8 @@ static void e1000_update_phy_info(unsigned long data)
 /**
  * e1000e_update_phy_stats - Update the PHY statistics counters
  * @adapter: board private structure
+ *
+ * Read/clear the upper 16-bit PHY registers and read/accumulate lower
  **/
 static void e1000e_update_phy_stats(struct e1000_adapter *adapter)
 {
@@ -3844,89 +3846,61 @@ static void e1000e_update_phy_stats(struct e1000_adapter *adapter)
 	if (ret_val)
 		return;
 
-	hw->phy.addr = 1;
-
-#define HV_PHY_STATS_PAGE	778
 	/*
 	 * A page set is expensive so check if already on desired page.
 	 * If not, set to the page with the PHY status registers.
 	 */
+	hw->phy.addr = 1;
 	ret_val = e1000e_read_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
 					   &phy_data);
 	if (ret_val)
 		goto release;
-	if (phy_data != (HV_PHY_STATS_PAGE << IGP_PAGE_SHIFT)) {
-		ret_val = e1000e_write_phy_reg_mdic(hw,
-						    IGP01E1000_PHY_PAGE_SELECT,
-						    (HV_PHY_STATS_PAGE <<
-						     IGP_PAGE_SHIFT));
+	if (phy_data != (HV_STATS_PAGE << IGP_PAGE_SHIFT)) {
+		ret_val = hw->phy.ops.set_page(hw,
+					       HV_STATS_PAGE << IGP_PAGE_SHIFT);
 		if (ret_val)
 			goto release;
 	}
 
-	/* Read/clear the upper 16-bit registers and read/accumulate lower */
-
 	/* Single Collision Count */
-	e1000e_read_phy_reg_mdic(hw, HV_SCC_UPPER & MAX_PHY_REG_ADDRESS,
-				 &phy_data);
-	ret_val = e1000e_read_phy_reg_mdic(hw,
-					   HV_SCC_LOWER & MAX_PHY_REG_ADDRESS,
-					   &phy_data);
+	hw->phy.ops.read_reg_page(hw, HV_SCC_UPPER, &phy_data);
+	ret_val = hw->phy.ops.read_reg_page(hw, HV_SCC_LOWER, &phy_data);
 	if (!ret_val)
 		adapter->stats.scc += phy_data;
 
 	/* Excessive Collision Count */
-	e1000e_read_phy_reg_mdic(hw, HV_ECOL_UPPER & MAX_PHY_REG_ADDRESS,
-				 &phy_data);
-	ret_val = e1000e_read_phy_reg_mdic(hw,
-					   HV_ECOL_LOWER & MAX_PHY_REG_ADDRESS,
-					   &phy_data);
+	hw->phy.ops.read_reg_page(hw, HV_ECOL_UPPER, &phy_data);
+	ret_val = hw->phy.ops.read_reg_page(hw, HV_ECOL_LOWER, &phy_data);
 	if (!ret_val)
 		adapter->stats.ecol += phy_data;
 
 	/* Multiple Collision Count */
-	e1000e_read_phy_reg_mdic(hw, HV_MCC_UPPER & MAX_PHY_REG_ADDRESS,
-				 &phy_data);
-	ret_val = e1000e_read_phy_reg_mdic(hw,
-					   HV_MCC_LOWER & MAX_PHY_REG_ADDRESS,
-					   &phy_data);
+	hw->phy.ops.read_reg_page(hw, HV_MCC_UPPER, &phy_data);
+	ret_val = hw->phy.ops.read_reg_page(hw, HV_MCC_LOWER, &phy_data);
 	if (!ret_val)
 		adapter->stats.mcc += phy_data;
 
 	/* Late Collision Count */
-	e1000e_read_phy_reg_mdic(hw, HV_LATECOL_UPPER & MAX_PHY_REG_ADDRESS,
-				 &phy_data);
-	ret_val = e1000e_read_phy_reg_mdic(hw,
-					   HV_LATECOL_LOWER &
-					   MAX_PHY_REG_ADDRESS,
-					   &phy_data);
+	hw->phy.ops.read_reg_page(hw, HV_LATECOL_UPPER, &phy_data);
+	ret_val = hw->phy.ops.read_reg_page(hw, HV_LATECOL_LOWER, &phy_data);
 	if (!ret_val)
 		adapter->stats.latecol += phy_data;
 
 	/* Collision Count - also used for adaptive IFS */
-	e1000e_read_phy_reg_mdic(hw, HV_COLC_UPPER & MAX_PHY_REG_ADDRESS,
-				 &phy_data);
-	ret_val = e1000e_read_phy_reg_mdic(hw,
-					   HV_COLC_LOWER & MAX_PHY_REG_ADDRESS,
-					   &phy_data);
+	hw->phy.ops.read_reg_page(hw, HV_COLC_UPPER, &phy_data);
+	ret_val = hw->phy.ops.read_reg_page(hw, HV_COLC_LOWER, &phy_data);
 	if (!ret_val)
 		hw->mac.collision_delta = phy_data;
 
 	/* Defer Count */
-	e1000e_read_phy_reg_mdic(hw, HV_DC_UPPER & MAX_PHY_REG_ADDRESS,
-				 &phy_data);
-	ret_val = e1000e_read_phy_reg_mdic(hw,
-					   HV_DC_LOWER & MAX_PHY_REG_ADDRESS,
-					   &phy_data);
+	hw->phy.ops.read_reg_page(hw, HV_DC_UPPER, &phy_data);
+	ret_val = hw->phy.ops.read_reg_page(hw, HV_DC_LOWER, &phy_data);
 	if (!ret_val)
 		adapter->stats.dc += phy_data;
 
 	/* Transmit with no CRS */
-	e1000e_read_phy_reg_mdic(hw, HV_TNCRS_UPPER & MAX_PHY_REG_ADDRESS,
-				 &phy_data);
-	ret_val = e1000e_read_phy_reg_mdic(hw,
-					   HV_TNCRS_LOWER & MAX_PHY_REG_ADDRESS,
-					   &phy_data);
+	hw->phy.ops.read_reg_page(hw, HV_TNCRS_UPPER, &phy_data);
+	ret_val = hw->phy.ops.read_reg_page(hw, HV_TNCRS_LOWER, &phy_data);
 	if (!ret_val)
 		adapter->stats.tncrs += phy_data;
 
@@ -5154,21 +5128,34 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
 {
 	struct e1000_hw *hw = &adapter->hw;
 	u32 i, mac_reg;
-	u16 phy_reg;
+	u16 phy_reg, wuc_enable;
 	int retval = 0;
 
 	/* copy MAC RARs to PHY RARs */
 	e1000_copy_rx_addrs_to_phy_ich8lan(hw);
 
-	/* copy MAC MTA to PHY MTA */
+	retval = hw->phy.ops.acquire(hw);
+	if (retval) {
+		e_err("Could not acquire PHY\n");
+		return retval;
+	}
+
+	/* Enable access to wakeup registers on and set page to BM_WUC_PAGE */
+	retval = e1000_enable_phy_wakeup_reg_access_bm(hw, &wuc_enable);
+	if (retval)
+		goto out;
+
+	/* copy MAC MTA to PHY MTA - only needed for pchlan */
 	for (i = 0; i < adapter->hw.mac.mta_reg_count; i++) {
 		mac_reg = E1000_READ_REG_ARRAY(hw, E1000_MTA, i);
-		e1e_wphy(hw, BM_MTA(i), (u16)(mac_reg & 0xFFFF));
-		e1e_wphy(hw, BM_MTA(i) + 1, (u16)((mac_reg >> 16) & 0xFFFF));
+		hw->phy.ops.write_reg_page(hw, BM_MTA(i),
+					   (u16)(mac_reg & 0xFFFF));
+		hw->phy.ops.write_reg_page(hw, BM_MTA(i) + 1,
+					   (u16)((mac_reg >> 16) & 0xFFFF));
 	}
 
 	/* configure PHY Rx Control register */
-	e1e_rphy(&adapter->hw, BM_RCTL, &phy_reg);
+	hw->phy.ops.read_reg_page(&adapter->hw, BM_RCTL, &phy_reg);
 	mac_reg = er32(RCTL);
 	if (mac_reg & E1000_RCTL_UPE)
 		phy_reg |= BM_RCTL_UPE;
@@ -5185,31 +5172,19 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
 	mac_reg = er32(CTRL);
 	if (mac_reg & E1000_CTRL_RFCE)
 		phy_reg |= BM_RCTL_RFCE;
-	e1e_wphy(&adapter->hw, BM_RCTL, phy_reg);
+	hw->phy.ops.write_reg_page(&adapter->hw, BM_RCTL, phy_reg);
 
 	/* enable PHY wakeup in MAC register */
 	ew32(WUFC, wufc);
 	ew32(WUC, E1000_WUC_PHY_WAKE | E1000_WUC_PME_EN);
 
 	/* configure and enable PHY wakeup in PHY registers */
-	e1e_wphy(&adapter->hw, BM_WUFC, wufc);
-	e1e_wphy(&adapter->hw, BM_WUC, E1000_WUC_PME_EN);
+	hw->phy.ops.write_reg_page(&adapter->hw, BM_WUFC, wufc);
+	hw->phy.ops.write_reg_page(&adapter->hw, BM_WUC, E1000_WUC_PME_EN);
 
 	/* activate PHY wakeup */
-	retval = hw->phy.ops.acquire(hw);
-	if (retval) {
-		e_err("Could not acquire PHY\n");
-		return retval;
-	}
-	e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
-	                         (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
-	retval = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, &phy_reg);
-	if (retval) {
-		e_err("Could not read PHY page 769\n");
-		goto out;
-	}
-	phy_reg |= BM_WUC_ENABLE_BIT | BM_WUC_HOST_WU_BIT;
-	retval = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
+	wuc_enable |= BM_WUC_ENABLE_BIT | BM_WUC_HOST_WU_BIT;
+	retval = e1000_disable_phy_wakeup_reg_access_bm(hw, &wuc_enable);
 	if (retval)
 		e_err("Could not set PHY Host Wakeup bit\n");
 out: