diff options
| author | Bruce Allan <bruce.w.allan@intel.com> | 2010-06-16 13:25:55 +0000 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2010-06-18 22:12:14 -0700 |
| commit | 3af50481eee6bb278da9050266ff31804e7a57d6 (patch) | |
| tree | 34350fe19d0b53382060e126cdda662376d1b38a /drivers/net/e1000e | |
| parent | 20c0da65d72598ced2bfd4d4ca9a5aca1c93f5b9 (diff) | |
e1000e: cleanup ethtool loopback setup code
Refactor the loopback setup code to first handle the only 10/100 PHY
supported by the driver if applicable and then handle the 1Gig PHYs in a
switch statement for PHY-specific setups.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/e1000e')
| -rw-r--r-- | drivers/net/e1000e/ethtool.c | 74 |
1 files changed, 42 insertions, 32 deletions
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index 2c521218102b..86c6a26c0a39 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -1263,33 +1263,36 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) hw->mac.autoneg = 0; - /* Workaround: K1 must be disabled for stable 1Gbps operation */ - if (hw->mac.type == e1000_pchlan) - e1000_configure_k1_ich8lan(hw, false); - - if (hw->phy.type == e1000_phy_m88) { - /* Auto-MDI/MDIX Off */ - e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, 0x0808); - /* reset to update Auto-MDI/MDIX */ - e1e_wphy(hw, PHY_CONTROL, 0x9140); - /* autoneg off */ - e1e_wphy(hw, PHY_CONTROL, 0x8140); - } else if (hw->phy.type == e1000_phy_gg82563) - e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x1CC); - - ctrl_reg = er32(CTRL); - - switch (hw->phy.type) { - case e1000_phy_ife: + if (hw->phy.type == e1000_phy_ife) { /* force 100, set loopback */ e1e_wphy(hw, PHY_CONTROL, 0x6100); /* Now set up the MAC to the same speed/duplex as the PHY. */ + ctrl_reg = er32(CTRL); ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */ ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ E1000_CTRL_SPD_100 |/* Force Speed to 100 */ E1000_CTRL_FD); /* Force Duplex to FULL */ + + ew32(CTRL, ctrl_reg); + udelay(500); + + return 0; + } + + /* Specific PHY configuration for loopback */ + switch (hw->phy.type) { + case e1000_phy_m88: + /* Auto-MDI/MDIX Off */ + e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, 0x0808); + /* reset to update Auto-MDI/MDIX */ + e1e_wphy(hw, PHY_CONTROL, 0x9140); + /* autoneg off */ + e1e_wphy(hw, PHY_CONTROL, 0x8140); + break; + case e1000_phy_gg82563: + e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x1CC); break; case e1000_phy_bm: /* Set Default MAC Interface speed to 1GB */ @@ -1312,23 +1315,30 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) /* Set Early Link Enable */ e1e_rphy(hw, PHY_REG(769, 20), &phy_reg); e1e_wphy(hw, PHY_REG(769, 20), phy_reg | 0x0400); - /* fall through */ + break; + case e1000_phy_82577: + case e1000_phy_82578: + /* Workaround: K1 must be disabled for stable 1Gbps operation */ + e1000_configure_k1_ich8lan(hw, false); + break; default: - /* force 1000, set loopback */ - e1e_wphy(hw, PHY_CONTROL, 0x4140); - mdelay(250); + break; + } - /* Now set up the MAC to the same speed/duplex as the PHY. */ - ctrl_reg = er32(CTRL); - ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */ - ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ - E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ - E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */ - E1000_CTRL_FD); /* Force Duplex to FULL */ + /* force 1000, set loopback */ + e1e_wphy(hw, PHY_CONTROL, 0x4140); + mdelay(250); - if (adapter->flags & FLAG_IS_ICH) - ctrl_reg |= E1000_CTRL_SLU; /* Set Link Up */ - } + /* Now set up the MAC to the same speed/duplex as the PHY. */ + ctrl_reg = er32(CTRL); + ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */ + ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ + E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ + E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */ + E1000_CTRL_FD); /* Force Duplex to FULL */ + + if (adapter->flags & FLAG_IS_ICH) + ctrl_reg |= E1000_CTRL_SLU; /* Set Link Up */ if (hw->phy.media_type == e1000_media_type_copper && hw->phy.type == e1000_phy_m88) { |