diff options
author | Michael Chan <mchan@broadcom.com> | 2013-08-06 15:50:11 -0700 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2013-08-07 10:44:07 -0700 |
commit | 25bfb1dd4ba3b2d9a49ce9d9b0cd7be1840e15ed (patch) | |
tree | 2fb6b38275eb8e8853bf518f9d301d72bf1533d5 /drivers/net/ethernet/broadcom/bnx2.c | |
parent | 28fb4eb4b7f29abaef3e79be5fc049a904221698 (diff) |
bnx2: Add pci shutdown handler.
WoL and power state changes will now be done in the shutdown handler.
open/close/ethtool will no longer change the power state. NVRAM
operations can now be permitted whether the device is up or down.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2.c')
-rw-r--r-- | drivers/net/ethernet/broadcom/bnx2.c | 47 |
1 files changed, 25 insertions, 22 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index 27a128ce8c7b..88f5ab132834 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -6302,7 +6302,6 @@ bnx2_open(struct net_device *dev) netif_carrier_off(dev); - bnx2_set_power_state(bp, PCI_D0); bnx2_disable_int(bp); rc = bnx2_setup_int_mode(bp, disable_msi); @@ -6709,7 +6708,6 @@ bnx2_close(struct net_device *dev) bnx2_del_napi(bp); bp->link_up = 0; netif_carrier_off(bp->dev); - bnx2_set_power_state(bp, PCI_D3hot); return 0; } @@ -7144,9 +7142,6 @@ bnx2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, struct bnx2 *bp = netdev_priv(dev); int rc; - if (!netif_running(dev)) - return -EAGAIN; - /* parameters already validated in ethtool_get_eeprom */ rc = bnx2_nvram_read(bp, eeprom->offset, eebuf, eeprom->len); @@ -7161,9 +7156,6 @@ bnx2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, struct bnx2 *bp = netdev_priv(dev); int rc; - if (!netif_running(dev)) - return -EAGAIN; - /* parameters already validated in ethtool_set_eeprom */ rc = bnx2_nvram_write(bp, eeprom->offset, eebuf, eeprom->len); @@ -7523,8 +7515,6 @@ bnx2_self_test(struct net_device *dev, struct ethtool_test *etest, u64 *buf) { struct bnx2 *bp = netdev_priv(dev); - bnx2_set_power_state(bp, PCI_D0); - memset(buf, 0, sizeof(u64) * BNX2_NUM_TESTS); if (etest->flags & ETH_TEST_FL_OFFLINE) { int i; @@ -7573,8 +7563,6 @@ bnx2_self_test(struct net_device *dev, struct ethtool_test *etest, u64 *buf) etest->flags |= ETH_TEST_FL_FAILED; } - if (!netif_running(bp->dev)) - bnx2_set_power_state(bp, PCI_D3hot); } static void @@ -7646,8 +7634,6 @@ bnx2_set_phys_id(struct net_device *dev, enum ethtool_phys_id_state state) switch (state) { case ETHTOOL_ID_ACTIVE: - bnx2_set_power_state(bp, PCI_D0); - bp->leds_save = BNX2_RD(bp, BNX2_MISC_CFG); BNX2_WR(bp, BNX2_MISC_CFG, BNX2_MISC_CFG_LEDMODE_MAC); return 1; /* cycle on/off once per second */ @@ -7668,9 +7654,6 @@ bnx2_set_phys_id(struct net_device *dev, enum ethtool_phys_id_state state) case ETHTOOL_ID_INACTIVE: BNX2_WR(bp, BNX2_EMAC_LED, 0); BNX2_WR(bp, BNX2_MISC_CFG, bp->leds_save); - - if (!netif_running(dev)) - bnx2_set_power_state(bp, PCI_D3hot); break; } @@ -8118,8 +8101,6 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) goto err_out_release; } - bnx2_set_power_state(bp, PCI_D0); - /* Configure byte swap and enable write to the reg_window registers. * Rely on CPU to do target byte swapping on big endian systems * The chip's target access swapping will not swap all accesses @@ -8705,10 +8686,9 @@ static pci_ers_result_t bnx2_io_slot_reset(struct pci_dev *pdev) pci_restore_state(pdev); pci_save_state(pdev); - if (netif_running(dev)) { - bnx2_set_power_state(bp, PCI_D0); + if (netif_running(dev)) err = bnx2_init_nic(bp, 1); - } + if (!err) result = PCI_ERS_RESULT_RECOVERED; } @@ -8752,6 +8732,28 @@ static void bnx2_io_resume(struct pci_dev *pdev) rtnl_unlock(); } +static void bnx2_shutdown(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2 *bp; + + if (!dev) + return; + + bp = netdev_priv(dev); + if (!bp) + return; + + rtnl_lock(); + if (netif_running(dev)) + dev_close(bp->dev); + + if (system_state == SYSTEM_POWER_OFF) + bnx2_set_power_state(bp, PCI_D3hot); + + rtnl_unlock(); +} + static const struct pci_error_handlers bnx2_err_handler = { .error_detected = bnx2_io_error_detected, .slot_reset = bnx2_io_slot_reset, @@ -8765,6 +8767,7 @@ static struct pci_driver bnx2_pci_driver = { .remove = bnx2_remove_one, .driver.pm = BNX2_PM_OPS, .err_handler = &bnx2_err_handler, + .shutdown = bnx2_shutdown, }; module_pci_driver(bnx2_pci_driver); |