diff options
author | Doug Berger <opendmb@gmail.com> | 2017-03-21 14:01:06 -0700 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2017-03-30 09:35:14 +0200 |
commit | 85f00dac91a1047b57e600df9636c8408f70001f (patch) | |
tree | 532f15b0f9f16676c56c6816c21ef96eb4af220b /drivers/net/ethernet/broadcom/genet | |
parent | fdcee7c1e2f8c6f46f26010b133ed963b620da2b (diff) |
net: bcmgenet: remove bcmgenet_internal_phy_setup()
[ Upstream commit 31739eae738ccbe8b9d627c3f2251017ca03f4d2 ]
Commit 6ac3ce8295e6 ("net: bcmgenet: Remove excessive PHY reset")
removed the bcmgenet_mii_reset() function from bcmgenet_power_up() and
bcmgenet_internal_phy_setup() functions. In so doing it broke the reset
of the internal PHY devices used by the GENETv1-GENETv3 which required
this reset before the UniMAC was enabled. It also broke the internal
GPHY devices used by the GENETv4 because the config_init that installed
the AFE workaround was no longer occurring after the reset of the GPHY
performed by bcmgenet_phy_power_set() in bcmgenet_internal_phy_setup().
In addition the code in bcmgenet_internal_phy_setup() related to the
"enable APD" comment goes with the bcmgenet_mii_reset() so it should
have also been removed.
Commit bd4060a6108b ("net: bcmgenet: Power on integrated GPHY in
bcmgenet_power_up()") moved the bcmgenet_phy_power_set() call to the
bcmgenet_power_up() function, but failed to remove it from the
bcmgenet_internal_phy_setup() function. Had it done so, the
bcmgenet_internal_phy_setup() function would have been empty and could
have been removed at that time.
Commit 5dbebbb44a6a ("net: bcmgenet: Software reset EPHY after power on")
was submitted to correct the functional problems introduced by
commit 6ac3ce8295e6 ("net: bcmgenet: Remove excessive PHY reset"). It
was included in v4.4 and made available on 4.3-stable. Unfortunately,
it didn't fully revert the commit because this bcmgenet_mii_reset()
doesn't apply the soft reset to the internal GPHY used by GENETv4 like
the previous one did. This prevents the restoration of the AFE work-
arounds for internal GPHY devices after the bcmgenet_phy_power_set() in
bcmgenet_internal_phy_setup().
This commit takes the alternate approach of removing the unnecessary
bcmgenet_internal_phy_setup() function which shouldn't have been in v4.3
so that when bcmgenet_mii_reset() was restored it should have only gone
into bcmgenet_power_up(). This will avoid the problems while also
removing the redundancy (and hopefully some of the confusion).
Fixes: 6ac3ce8295e6 ("net: bcmgenet: Remove excessive PHY reset")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/net/ethernet/broadcom/genet')
-rw-r--r-- | drivers/net/ethernet/broadcom/genet/bcmmii.c | 15 |
1 files changed, 0 insertions, 15 deletions
diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c index 8bdfe53754ba..e96d1f95bb47 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmmii.c +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c @@ -220,20 +220,6 @@ void bcmgenet_phy_power_set(struct net_device *dev, bool enable) udelay(60); } -static void bcmgenet_internal_phy_setup(struct net_device *dev) -{ - struct bcmgenet_priv *priv = netdev_priv(dev); - u32 reg; - - /* Power up PHY */ - bcmgenet_phy_power_set(dev, true); - /* enable APD */ - reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT); - reg |= EXT_PWR_DN_EN_LD; - bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT); - bcmgenet_mii_reset(dev); -} - static void bcmgenet_moca_phy_setup(struct bcmgenet_priv *priv) { u32 reg; @@ -281,7 +267,6 @@ int bcmgenet_mii_config(struct net_device *dev) if (priv->internal_phy) { phy_name = "internal PHY"; - bcmgenet_internal_phy_setup(dev); } else if (priv->phy_interface == PHY_INTERFACE_MODE_MOCA) { phy_name = "MoCA"; bcmgenet_moca_phy_setup(priv); |