freescale: Move the Freescale drivers

Move the Freescale drivers into drivers/net/ethernet/freescale/ and
make the necessary Kconfig and Makefile changes.

CC: Sandeep Gopalpet <sandeep.kumar@freescale.com>
CC: Andy Fleming <afleming@freescale.com>
CC: Shlomi Gridish <gridish@freescale.com>
CC: Li Yang <leoli@freescale.com>
CC: Pantelis Antoniou <pantelis.antoniou@gmail.com>
CC: Vitaly Bordug <vbordug@ru.mvista.com>
CC: Dan Malek <dmalek@jlc.net>
CC: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 148 insertions, 0 deletions

diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h
new file mode 100644
index 000000000000..8b2c6d797e6d
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fec.h
@@ -0,0 +1,148 @@
+/****************************************************************************/
+
+/*
+ *	fec.h  --  Fast Ethernet Controller for Motorola ColdFire SoC
+ *		   processors.
+ *
+ *	(C) Copyright 2000-2005, Greg Ungerer (gerg@snapgear.com)
+ *	(C) Copyright 2000-2001, Lineo (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef FEC_H
+#define	FEC_H
+/****************************************************************************/
+
+#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+    defined(CONFIG_M520x) || defined(CONFIG_M532x) || \
+    defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28)
+/*
+ *	Just figures, Motorola would have to change the offsets for
+ *	registers in the same peripheral device on different models
+ *	of the ColdFire!
+ */
+#define FEC_IEVENT		0x004 /* Interrupt event reg */
+#define FEC_IMASK		0x008 /* Interrupt mask reg */
+#define FEC_R_DES_ACTIVE	0x010 /* Receive descriptor reg */
+#define FEC_X_DES_ACTIVE	0x014 /* Transmit descriptor reg */
+#define FEC_ECNTRL		0x024 /* Ethernet control reg */
+#define FEC_MII_DATA		0x040 /* MII manage frame reg */
+#define FEC_MII_SPEED		0x044 /* MII speed control reg */
+#define FEC_MIB_CTRLSTAT	0x064 /* MIB control/status reg */
+#define FEC_R_CNTRL		0x084 /* Receive control reg */
+#define FEC_X_CNTRL		0x0c4 /* Transmit Control reg */
+#define FEC_ADDR_LOW		0x0e4 /* Low 32bits MAC address */
+#define FEC_ADDR_HIGH		0x0e8 /* High 16bits MAC address */
+#define FEC_OPD			0x0ec /* Opcode + Pause duration */
+#define FEC_HASH_TABLE_HIGH	0x118 /* High 32bits hash table */
+#define FEC_HASH_TABLE_LOW	0x11c /* Low 32bits hash table */
+#define FEC_GRP_HASH_TABLE_HIGH	0x120 /* High 32bits hash table */
+#define FEC_GRP_HASH_TABLE_LOW	0x124 /* Low 32bits hash table */
+#define FEC_X_WMRK		0x144 /* FIFO transmit water mark */
+#define FEC_R_BOUND		0x14c /* FIFO receive bound reg */
+#define FEC_R_FSTART		0x150 /* FIFO receive start reg */
+#define FEC_R_DES_START		0x180 /* Receive descriptor ring */
+#define FEC_X_DES_START		0x184 /* Transmit descriptor ring */
+#define FEC_R_BUFF_SIZE		0x188 /* Maximum receive buff size */
+#define FEC_MIIGSK_CFGR		0x300 /* MIIGSK Configuration reg */
+#define FEC_MIIGSK_ENR		0x308 /* MIIGSK Enable reg */
+
+#else
+
+#define FEC_ECNTRL		0x000 /* Ethernet control reg */
+#define FEC_IEVENT		0x004 /* Interrupt even reg */
+#define FEC_IMASK		0x008 /* Interrupt mask reg */
+#define FEC_IVEC		0x00c /* Interrupt vec status reg */
+#define FEC_R_DES_ACTIVE	0x010 /* Receive descriptor reg */
+#define FEC_X_DES_ACTIVE	0x014 /* Transmit descriptor reg */
+#define FEC_MII_DATA		0x040 /* MII manage frame reg */
+#define FEC_MII_SPEED		0x044 /* MII speed control reg */
+#define FEC_R_BOUND		0x08c /* FIFO receive bound reg */
+#define FEC_R_FSTART		0x090 /* FIFO receive start reg */
+#define FEC_X_WMRK		0x0a4 /* FIFO transmit water mark */
+#define FEC_X_FSTART		0x0ac /* FIFO transmit start reg */
+#define FEC_R_CNTRL		0x104 /* Receive control reg */
+#define FEC_MAX_FRM_LEN		0x108 /* Maximum frame length reg */
+#define FEC_X_CNTRL		0x144 /* Transmit Control reg */
+#define FEC_ADDR_LOW		0x3c0 /* Low 32bits MAC address */
+#define FEC_ADDR_HIGH		0x3c4 /* High 16bits MAC address */
+#define FEC_GRP_HASH_TABLE_HIGH	0x3c8 /* High 32bits hash table */
+#define FEC_GRP_HASH_TABLE_LOW	0x3cc /* Low 32bits hash table */
+#define FEC_R_DES_START		0x3d0 /* Receive descriptor ring */
+#define FEC_X_DES_START		0x3d4 /* Transmit descriptor ring */
+#define FEC_R_BUFF_SIZE		0x3d8 /* Maximum receive buff size */
+#define FEC_FIFO_RAM		0x400 /* FIFO RAM buffer */
+
+#endif /* CONFIG_M5272 */
+
+
+/*
+ *	Define the buffer descriptor structure.
+ */
+#if defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28)
+struct bufdesc {
+	unsigned short cbd_datlen;	/* Data length */
+	unsigned short cbd_sc;	/* Control and status info */
+	unsigned long cbd_bufaddr;	/* Buffer address */
+};
+#else
+struct bufdesc {
+	unsigned short	cbd_sc;			/* Control and status info */
+	unsigned short	cbd_datlen;		/* Data length */
+	unsigned long	cbd_bufaddr;		/* Buffer address */
+};
+#endif
+
+/*
+ *	The following definitions courtesy of commproc.h, which where
+ *	Copyright (c) 1997 Dan Malek (dmalek@jlc.net).
+ */
+#define BD_SC_EMPTY     ((ushort)0x8000)        /* Receive is empty */
+#define BD_SC_READY     ((ushort)0x8000)        /* Transmit is ready */
+#define BD_SC_WRAP      ((ushort)0x2000)        /* Last buffer descriptor */
+#define BD_SC_INTRPT    ((ushort)0x1000)        /* Interrupt on change */
+#define BD_SC_CM        ((ushort)0x0200)        /* Continuous mode */
+#define BD_SC_ID        ((ushort)0x0100)        /* Rec'd too many idles */
+#define BD_SC_P         ((ushort)0x0100)        /* xmt preamble */
+#define BD_SC_BR        ((ushort)0x0020)        /* Break received */
+#define BD_SC_FR        ((ushort)0x0010)        /* Framing error */
+#define BD_SC_PR        ((ushort)0x0008)        /* Parity error */
+#define BD_SC_OV        ((ushort)0x0002)        /* Overrun */
+#define BD_SC_CD        ((ushort)0x0001)        /* ?? */
+
+/* Buffer descriptor control/status used by Ethernet receive.
+*/
+#define BD_ENET_RX_EMPTY        ((ushort)0x8000)
+#define BD_ENET_RX_WRAP         ((ushort)0x2000)
+#define BD_ENET_RX_INTR         ((ushort)0x1000)
+#define BD_ENET_RX_LAST         ((ushort)0x0800)
+#define BD_ENET_RX_FIRST        ((ushort)0x0400)
+#define BD_ENET_RX_MISS         ((ushort)0x0100)
+#define BD_ENET_RX_LG           ((ushort)0x0020)
+#define BD_ENET_RX_NO           ((ushort)0x0010)
+#define BD_ENET_RX_SH           ((ushort)0x0008)
+#define BD_ENET_RX_CR           ((ushort)0x0004)
+#define BD_ENET_RX_OV           ((ushort)0x0002)
+#define BD_ENET_RX_CL           ((ushort)0x0001)
+#define BD_ENET_RX_STATS        ((ushort)0x013f)        /* All status bits */
+
+/* Buffer descriptor control/status used by Ethernet transmit.
+*/
+#define BD_ENET_TX_READY        ((ushort)0x8000)
+#define BD_ENET_TX_PAD          ((ushort)0x4000)
+#define BD_ENET_TX_WRAP         ((ushort)0x2000)
+#define BD_ENET_TX_INTR         ((ushort)0x1000)
+#define BD_ENET_TX_LAST         ((ushort)0x0800)
+#define BD_ENET_TX_TC           ((ushort)0x0400)
+#define BD_ENET_TX_DEF          ((ushort)0x0200)
+#define BD_ENET_TX_HB           ((ushort)0x0100)
+#define BD_ENET_TX_LC           ((ushort)0x0080)
+#define BD_ENET_TX_RL           ((ushort)0x0040)
+#define BD_ENET_TX_RCMASK       ((ushort)0x003c)
+#define BD_ENET_TX_UN           ((ushort)0x0002)
+#define BD_ENET_TX_CSL          ((ushort)0x0001)
+#define BD_ENET_TX_STATS        ((ushort)0x03ff)        /* All status bits */
+
+
+/****************************************************************************/
+#endif /* FEC_H */