Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking changes from David Miller:

1) Allow to dump, monitor, and change the bridge multicast database
   using netlink.  From Cong Wang.

2) RFC 5961 TCP blind data injection attack mitigation, from Eric
   Dumazet.

3) Networking user namespace support from Eric W. Biederman.

4) tuntap/virtio-net multiqueue support by Jason Wang.

5) Support for checksum offload of encapsulated packets (basically,
   tunneled traffic can still be checksummed by HW).  From Joseph
   Gasparakis.

6) Allow BPF filter access to VLAN tags, from Eric Dumazet and
   Daniel Borkmann.

7) Bridge port parameters over netlink and BPDU blocking support
   from Stephen Hemminger.

8) Improve data access patterns during inet socket demux by rearranging
   socket layout, from Eric Dumazet.

9) TIPC protocol updates and cleanups from Ying Xue, Paul Gortmaker, and
   Jon Maloy.

10) Update TCP socket hash sizing to be more in line with current day
    realities.  The existing heurstics were choosen a decade ago.
    From Eric Dumazet.

11) Fix races, queue bloat, and excessive wakeups in ATM and
    associated drivers, from Krzysztof Mazur and David Woodhouse.

12) Support DOVE (Distributed Overlay Virtual Ethernet) extensions
    in VXLAN driver, from David Stevens.

13) Add "oops_only" mode to netconsole, from Amerigo Wang.

14) Support set and query of VEB/VEPA bridge mode via PF_BRIDGE, also
    allow DCB netlink to work on namespaces other than the initial
    namespace.  From John Fastabend.

15) Support PTP in the Tigon3 driver, from Matt Carlson.

16) tun/vhost zero copy fixes and improvements, plus turn it on
    by default, from Michael S. Tsirkin.

17) Support per-association statistics in SCTP, from Michele
    Baldessari.

And many, many, driver updates, cleanups, and improvements.  Too
numerous to mention individually.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits)
  net/mlx4_en: Add support for destination MAC in steering rules
  net/mlx4_en: Use generic etherdevice.h functions.
  net: ethtool: Add destination MAC address to flow steering API
  bridge: add support of adding and deleting mdb entries
  bridge: notify mdb changes via netlink
  ndisc: Unexport ndisc_{build,send}_skb().
  uapi: add missing netconf.h to export list
  pkt_sched: avoid requeues if possible
  solos-pci: fix double-free of TX skb in DMA mode
  bnx2: Fix accidental reversions.
  bna: Driver Version Updated to 3.1.2.1
  bna: Firmware update
  bna: Add RX State
  bna: Rx Page Based Allocation
  bna: TX Intr Coalescing Fix
  bna: Tx and Rx Optimizations
  bna: Code Cleanup and Enhancements
  ath9k: check pdata variable before dereferencing it
  ath5k: RX timestamp is reported at end of frame
  ath9k_htc: RX timestamp is reported at end of frame
  ...

1 files changed, 23 insertions, 43 deletions

diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
index 4dd18a1f45d2..e73c2c355993 100644
--- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c
+++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
@@ -26,8 +26,7 @@
 
 *******************************************************************************/
 
-/*
- * 80003ES2LAN Gigabit Ethernet Controller (Copper)
+/* 80003ES2LAN Gigabit Ethernet Controller (Copper)
  * 80003ES2LAN Gigabit Ethernet Controller (Serdes)
  */
 
@@ -80,7 +79,8 @@
 							   1 = 50-80M
 							   2 = 80-110M
 							   3 = 110-140M
-							   4 = >140M */
+							   4 = >140M
+							*/
 
 /* Kumeran Mode Control Register (Page 193, Register 16) */
 #define GG82563_KMCR_PASS_FALSE_CARRIER		 0x0800
@@ -95,8 +95,7 @@
 /* In-Band Control Register (Page 194, Register 18) */
 #define GG82563_ICR_DIS_PADDING			 0x0010 /* Disable Padding */
 
-/*
- * A table for the GG82563 cable length where the range is defined
+/* A table for the GG82563 cable length where the range is defined
  * with a lower bound at "index" and the upper bound at
  * "index + 5".
  */
@@ -183,8 +182,7 @@ static s32 e1000_init_nvm_params_80003es2lan(struct e1000_hw *hw)
 	size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
 			  E1000_EECD_SIZE_EX_SHIFT);
 
-	/*
-	 * Added to a constant, "size" becomes the left-shift value
+	/* Added to a constant, "size" becomes the left-shift value
 	 * for setting word_size.
 	 */
 	size += NVM_WORD_SIZE_BASE_SHIFT;
@@ -375,8 +373,7 @@ static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask)
 		if (!(swfw_sync & (fwmask | swmask)))
 			break;
 
-		/*
-		 * Firmware currently using resource (fwmask)
+		/* Firmware currently using resource (fwmask)
 		 * or other software thread using resource (swmask)
 		 */
 		e1000e_put_hw_semaphore(hw);
@@ -442,8 +439,7 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
 	if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
 		page_select = GG82563_PHY_PAGE_SELECT;
 	} else {
-		/*
-		 * Use Alternative Page Select register to access
+		/* Use Alternative Page Select register to access
 		 * registers 30 and 31
 		 */
 		page_select = GG82563_PHY_PAGE_SELECT_ALT;
@@ -457,8 +453,7 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
 	}
 
 	if (hw->dev_spec.e80003es2lan.mdic_wa_enable) {
-		/*
-		 * The "ready" bit in the MDIC register may be incorrectly set
+		/* The "ready" bit in the MDIC register may be incorrectly set
 		 * before the device has completed the "Page Select" MDI
 		 * transaction.  So we wait 200us after each MDI command...
 		 */
@@ -513,8 +508,7 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
 	if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
 		page_select = GG82563_PHY_PAGE_SELECT;
 	} else {
-		/*
-		 * Use Alternative Page Select register to access
+		/* Use Alternative Page Select register to access
 		 * registers 30 and 31
 		 */
 		page_select = GG82563_PHY_PAGE_SELECT_ALT;
@@ -528,8 +522,7 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
 	}
 
 	if (hw->dev_spec.e80003es2lan.mdic_wa_enable) {
-		/*
-		 * The "ready" bit in the MDIC register may be incorrectly set
+		/* The "ready" bit in the MDIC register may be incorrectly set
 		 * before the device has completed the "Page Select" MDI
 		 * transaction.  So we wait 200us after each MDI command...
 		 */
@@ -618,8 +611,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
 	u16 phy_data;
 	bool link;
 
-	/*
-	 * Clear Auto-Crossover to force MDI manually.  M88E1000 requires MDI
+	/* Clear Auto-Crossover to force MDI manually.  M88E1000 requires MDI
 	 * forced whenever speed and duplex are forced.
 	 */
 	ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
@@ -657,8 +649,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
 			return ret_val;
 
 		if (!link) {
-			/*
-			 * We didn't get link.
+			/* We didn't get link.
 			 * Reset the DSP and cross our fingers.
 			 */
 			ret_val = e1000e_phy_reset_dsp(hw);
@@ -677,8 +668,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	/*
-	 * Resetting the phy means we need to verify the TX_CLK corresponds
+	/* Resetting the phy means we need to verify the TX_CLK corresponds
 	 * to the link speed.  10Mbps -> 2.5MHz, else 25MHz.
 	 */
 	phy_data &= ~GG82563_MSCR_TX_CLK_MASK;
@@ -687,8 +677,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
 	else
 		phy_data |= GG82563_MSCR_TX_CLK_100MBPS_25;
 
-	/*
-	 * In addition, we must re-enable CRS on Tx for both half and full
+	/* In addition, we must re-enable CRS on Tx for both half and full
 	 * duplex.
 	 */
 	phy_data |= GG82563_MSCR_ASSERT_CRS_ON_TX;
@@ -766,8 +755,7 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
 	s32 ret_val;
 	u16 kum_reg_data;
 
-	/*
-	 * Prevent the PCI-E bus from sticking if there is no TLP connection
+	/* Prevent the PCI-E bus from sticking if there is no TLP connection
 	 * on the last TLP read/write transaction when MAC is reset.
 	 */
 	ret_val = e1000e_disable_pcie_master(hw);
@@ -899,8 +887,7 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
 			hw->dev_spec.e80003es2lan.mdic_wa_enable = false;
 	}
 
-	/*
-	 * Clear all of the statistics registers (clear on read).  It is
+	/* Clear all of the statistics registers (clear on read).  It is
 	 * important that we do this after we have tried to establish link
 	 * because the symbol error count will increment wildly if there
 	 * is no link.
@@ -945,8 +932,7 @@ static void e1000_initialize_hw_bits_80003es2lan(struct e1000_hw *hw)
 		reg |= (1 << 28);
 	ew32(TARC(1), reg);
 
-	/*
-	 * Disable IPv6 extension header parsing because some malformed
+	/* Disable IPv6 extension header parsing because some malformed
 	 * IPv6 headers can hang the Rx.
 	 */
 	reg = er32(RFCTL);
@@ -979,8 +965,7 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	/*
-	 * Options:
+	/* Options:
 	 *   MDI/MDI-X = 0 (default)
 	 *   0 - Auto for all speeds
 	 *   1 - MDI mode
@@ -1006,8 +991,7 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
 		break;
 	}
 
-	/*
-	 * Options:
+	/* Options:
 	 *   disable_polarity_correction = 0 (default)
 	 *       Automatic Correction for Reversed Cable Polarity
 	 *   0 - Disabled
@@ -1065,8 +1049,7 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	/*
-	 * Do not init these registers when the HW is in IAMT mode, since the
+	/* Do not init these registers when the HW is in IAMT mode, since the
 	 * firmware will have already initialized them.  We only initialize
 	 * them if the HW is not in IAMT mode.
 	 */
@@ -1087,8 +1070,7 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
 			return ret_val;
 	}
 
-	/*
-	 * Workaround: Disable padding in Kumeran interface in the MAC
+	/* Workaround: Disable padding in Kumeran interface in the MAC
 	 * and in the PHY to avoid CRC errors.
 	 */
 	ret_val = e1e_rphy(hw, GG82563_PHY_INBAND_CTRL, &data);
@@ -1121,8 +1103,7 @@ static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw)
 	ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
 	ew32(CTRL, ctrl);
 
-	/*
-	 * Set the mac to wait the maximum time between each
+	/* Set the mac to wait the maximum time between each
 	 * iteration and increase the max iterations when
 	 * polling the phy; this fixes erroneous timeouts at 10Mbps.
 	 */
@@ -1352,8 +1333,7 @@ static s32 e1000_read_mac_addr_80003es2lan(struct e1000_hw *hw)
 {
 	s32 ret_val = 0;
 
-	/*
-	 * If there's an alternate MAC address place it in RAR0
+	/* If there's an alternate MAC address place it in RAR0
 	 * so that it will override the Si installed default perm
 	 * address.
 	 */