diff options
| author | Emil Tantilov <emil.s.tantilov@intel.com> | 2013-08-30 07:55:24 +0000 |
|---|---|---|
| committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2013-09-13 09:51:03 -0700 |
| commit | ed33ff66d8064e7b84459ad8ba49aad4cc67c269 (patch) | |
| tree | 8ba9125a2e53725687aa5b842b903095149cf897 /drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | |
| parent | 91ffdc842b8ac0f96b5283b0f0b72927b7dfa8c7 (diff) | |
ixgbe: limit setting speed to only one at a time for QSFP modules
QSFP+ modules do not support auto negotiation and should advertise only
one speed at a time.
This patch adds logic in ethtool to allow setting and reporting the
advertised speed at either 1Gbps or 10Gbps, but not both. Also limits
the speed set in ixgbe_sfp_link_config_subtask() to highest supported.
Previously the link was set to whatever the supported speeds were.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c')
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 13 |
1 files changed, 13 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 08efc253fb8d..b41db3be9184 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -186,6 +186,11 @@ static int ixgbe_get_settings(struct net_device *netdev, ecmd->advertising |= ADVERTISED_1000baseT_Full; if (supported_link & IXGBE_LINK_SPEED_100_FULL) ecmd->advertising |= ADVERTISED_100baseT_Full; + + if (hw->phy.multispeed_fiber && !autoneg) { + if (supported_link & IXGBE_LINK_SPEED_10GB_FULL) + ecmd->advertising = ADVERTISED_10000baseT_Full; + } } if (autoneg) { @@ -314,6 +319,14 @@ static int ixgbe_set_settings(struct net_device *netdev, if (ecmd->advertising & ~ecmd->supported) return -EINVAL; + /* only allow one speed at a time if no autoneg */ + if (!ecmd->autoneg && hw->phy.multispeed_fiber) { + if (ecmd->advertising == + (ADVERTISED_10000baseT_Full | + ADVERTISED_1000baseT_Full)) + return -EINVAL; + } + old = hw->phy.autoneg_advertised; advertised = 0; if (ecmd->advertising & ADVERTISED_10000baseT_Full) |