net/mlx4: Change QP allocation scheme

When using BF (Blue-Flame), the QPN overrides the VLAN, CV, and SV fields
in the WQE. Thus, BF may only be used for QPNs with bits 6,7 unset.

The current Ethernet driver code reserves a Tx QP range with 256b alignment.

This is wrong because if there are more than 64 Tx QPs in use,
QPNs >= base + 65 will have bits 6/7 set.

This problem is not specific for the Ethernet driver, any entity that
tries to reserve more than 64 BF-enabled QPs should fail. Also, using
ranges is not necessary here and is wasteful.

The new mechanism introduced here will support reservation for
"Eth QPs eligible for BF" for all drivers: bare-metal, multi-PF, and VFs
(when hypervisors support WC in VMs). The flow we use is:

1. In mlx4_en, allocate Tx QPs one by one instead of a range allocation,
   and request "BF enabled QPs" if BF is supported for the function

2. In the ALLOC_RES FW command, change param1 to:
a. param1[23:0]  - number of QPs
b. param1[31-24] - flags controlling QPs reservation

Bit 31 refers to Eth blueflame supported QPs. Those QPs must have
bits 6 and 7 unset in order to be used in Ethernet.

Bits 24-30 of the flags are currently reserved.

When a function tries to allocate a QP, it states the required attributes
for this QP. Those attributes are considered "best-effort". If an attribute,
such as Ethernet BF enabled QP, is a must-have attribute, the function has
to check that attribute is supported before trying to do the allocation.

In a lower layer of the code, mlx4_qp_reserve_range masks out the bits
which are unsupported. If SRIOV is used, the PF validates those attributes
and masks out unsupported attributes as well. In order to notify VFs which
attributes are supported, the VF uses QUERY_FUNC_CAP command. This command's
mailbox is filled by the PF, which notifies which QP allocation attributes
it supports.

Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 19 insertions, 1 deletions

diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c
index 5089f76f060b..1469b5b5be64 100644
--- a/drivers/net/ethernet/mellanox/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c
@@ -266,10 +266,15 @@ int mlx4_QUERY_FUNC_CAP_wrapper(struct mlx4_dev *dev, int slave,
 #define QUERY_FUNC_CAP_MTT_QUOTA_OFFSET		0x64
 #define QUERY_FUNC_CAP_MCG_QUOTA_OFFSET		0x68
 
+#define QUERY_FUNC_CAP_EXTRA_FLAGS_OFFSET	0x6c
+
 #define QUERY_FUNC_CAP_FMR_FLAG			0x80
 #define QUERY_FUNC_CAP_FLAG_RDMA		0x40
 #define QUERY_FUNC_CAP_FLAG_ETH			0x80
 #define QUERY_FUNC_CAP_FLAG_QUOTAS		0x10
+#define QUERY_FUNC_CAP_FLAG_VALID_MAILBOX	0x04
+
+#define QUERY_FUNC_CAP_EXTRA_FLAGS_BF_QP_ALLOC_FLAG	(1UL << 31)
 
 /* when opcode modifier = 1 */
 #define QUERY_FUNC_CAP_PHYS_PORT_OFFSET		0x3
@@ -339,7 +344,7 @@ int mlx4_QUERY_FUNC_CAP_wrapper(struct mlx4_dev *dev, int slave,
 			mlx4_get_active_ports(dev, slave);
 		/* enable rdma and ethernet interfaces, and new quota locations */
 		field = (QUERY_FUNC_CAP_FLAG_ETH | QUERY_FUNC_CAP_FLAG_RDMA |
-			 QUERY_FUNC_CAP_FLAG_QUOTAS);
+			 QUERY_FUNC_CAP_FLAG_QUOTAS | QUERY_FUNC_CAP_FLAG_VALID_MAILBOX);
 		MLX4_PUT(outbox->buf, field, QUERY_FUNC_CAP_FLAGS_OFFSET);
 
 		field = min(
@@ -401,6 +406,8 @@ int mlx4_QUERY_FUNC_CAP_wrapper(struct mlx4_dev *dev, int slave,
 		MLX4_PUT(outbox->buf, size, QUERY_FUNC_CAP_MCG_QUOTA_OFFSET);
 		MLX4_PUT(outbox->buf, size, QUERY_FUNC_CAP_MCG_QUOTA_OFFSET_DEP);
 
+		size = QUERY_FUNC_CAP_EXTRA_FLAGS_BF_QP_ALLOC_FLAG;
+		MLX4_PUT(outbox->buf, size, QUERY_FUNC_CAP_EXTRA_FLAGS_OFFSET);
 	} else
 		err = -EINVAL;
 
@@ -493,6 +500,17 @@ int mlx4_QUERY_FUNC_CAP(struct mlx4_dev *dev, u8 gen_or_port,
 		MLX4_GET(size, outbox, QUERY_FUNC_CAP_RESERVED_EQ_OFFSET);
 		func_cap->reserved_eq = size & 0xFFFFFF;
 
+		func_cap->extra_flags = 0;
+
+		/* Mailbox data from 0x6c and onward should only be treated if
+		 * QUERY_FUNC_CAP_FLAG_VALID_MAILBOX is set in func_cap->flags
+		 */
+		if (func_cap->flags & QUERY_FUNC_CAP_FLAG_VALID_MAILBOX) {
+			MLX4_GET(size, outbox, QUERY_FUNC_CAP_EXTRA_FLAGS_OFFSET);
+			if (size & QUERY_FUNC_CAP_EXTRA_FLAGS_BF_QP_ALLOC_FLAG)
+				func_cap->extra_flags |= MLX4_QUERY_FUNC_FLAGS_BF_RES_QP;
+		}
+
 		goto out;
 	}