Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) BBR TCP congestion control, from Neal Cardwell, Yuchung Cheng and
    co. at Google. https://lwn.net/Articles/701165/

 2) Do TCP Small Queues for retransmits, from Eric Dumazet.

 3) Support collect_md mode for all IPV4 and IPV6 tunnels, from Alexei
    Starovoitov.

 4) Allow cls_flower to classify packets in ip tunnels, from Amir Vadai.

 5) Support DSA tagging in older mv88e6xxx switches, from Andrew Lunn.

 6) Support GMAC protocol in iwlwifi mwm, from Ayala Beker.

 7) Support ndo_poll_controller in mlx5, from Calvin Owens.

 8) Move VRF processing to an output hook and allow l3mdev to be
    loopback, from David Ahern.

 9) Support SOCK_DESTROY for UDP sockets. Also from David Ahern.

10) Congestion control in RXRPC, from David Howells.

11) Support geneve RX offload in ixgbe, from Emil Tantilov.

12) When hitting pressure for new incoming TCP data SKBs, perform a
    partial rathern than a full purge of the OFO queue (which could be
    huge). From Eric Dumazet.

13) Convert XFRM state and policy lookups to RCU, from Florian Westphal.

14) Support RX network flow classification to igb, from Gangfeng Huang.

15) Hardware offloading of eBPF in nfp driver, from Jakub Kicinski.

16) New skbmod packet action, from Jamal Hadi Salim.

17) Remove some inefficiencies in snmp proc output, from Jia He.

18) Add FIB notifications to properly propagate route changes to
    hardware which is doing forwarding offloading. From Jiri Pirko.

19) New dsa driver for qca8xxx chips, from John Crispin.

20) Implement RFC7559 ipv6 router solicitation backoff, from Maciej
    Żenczykowski.

21) Add L3 mode to ipvlan, from Mahesh Bandewar.

22) Support 802.1ad in mlx4, from Moshe Shemesh.

23) Support hardware LRO in mediatek driver, from Nelson Chang.

24) Add TC offloading to mlx5, from Or Gerlitz.

25) Convert various drivers to ethtool ksettings interfaces, from
    Philippe Reynes.

26) TX max rate limiting for cxgb4, from Rahul Lakkireddy.

27) NAPI support for ath10k, from Rajkumar Manoharan.

28) Support XDP in mlx5, from Rana Shahout and Saeed Mahameed.

29) UDP replicast support in TIPC, from Richard Alpe.

30) Per-queue statistics for qed driver, from Sudarsana Reddy Kalluru.

31) Support BQL in thunderx driver, from Sunil Goutham.

32) TSO support in alx driver, from Tobias Regnery.

33) Add stream parser engine and use it in kcm.

34) Support async DHCP replies in ipconfig module, from Uwe
    Kleine-König.

35) DSA port fast aging for mv88e6xxx driver, from Vivien Didelot.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1715 commits)
  mlxsw: switchx2: Fix misuse of hard_header_len
  mlxsw: spectrum: Fix misuse of hard_header_len
  net/faraday: Stop NCSI device on shutdown
  net/ncsi: Introduce ncsi_stop_dev()
  net/ncsi: Rework the channel monitoring
  net/ncsi: Allow to extend NCSI request properties
  net/ncsi: Rework request index allocation
  net/ncsi: Don't probe on the reserved channel ID (0x1f)
  net/ncsi: Introduce NCSI_RESERVED_CHANNEL
  net/ncsi: Avoid unused-value build warning from ia64-linux-gcc
  net: Add netdev all_adj_list refcnt propagation to fix panic
  net: phy: Add Edge-rate driver for Microsemi PHYs.
  vmxnet3: Wake queue from reset work
  i40e: avoid NULL pointer dereference and recursive errors on early PCI error
  qed: Add RoCE ll2 & GSI support
  qed: Add support for memory registeration verbs
  qed: Add support for QP verbs
  qed: PD,PKEY and CQ verb support
  qed: Add support for RoCE hw init
  qede: Add qedr framework
  ...

1 files changed, 109 insertions, 26 deletions

diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci.c b/drivers/net/ethernet/mellanox/mlxsw/pci.c
index 1d1360c178bb..e742bd4e8894 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/pci.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/pci.c
@@ -1156,6 +1156,16 @@ mlxsw_pci_config_profile_swid_config(struct mlxsw_pci *mlxsw_pci,
 
 #define MLXSW_RESOURCES_TABLE_END_ID 0xffff
 #define MLXSW_MAX_SPAN_ID 0x2420
+#define MLXSW_MAX_LAG_ID 0x2520
+#define MLXSW_MAX_PORTS_IN_LAG_ID 0x2521
+#define MLXSW_KVD_SIZE_ID 0x1001
+#define MLXSW_KVD_SINGLE_MIN_SIZE_ID 0x1002
+#define MLXSW_KVD_DOUBLE_MIN_SIZE_ID 0x1003
+#define MLXSW_MAX_VIRTUAL_ROUTERS_ID 0x2C01
+#define MLXSW_MAX_SYSTEM_PORT_ID 0x2502
+#define MLXSW_MAX_VLAN_GROUPS_ID 0x2906
+#define MLXSW_MAX_REGIONS_ID 0x2901
+#define MLXSW_MAX_RIF_ID 0x2C02
 #define MLXSW_RESOURCES_QUERY_MAX_QUERIES 100
 #define MLXSW_RESOURCES_PER_QUERY 32
 
@@ -1167,6 +1177,46 @@ static void mlxsw_pci_resources_query_parse(int id, u64 val,
 		resources->max_span = val;
 		resources->max_span_valid = 1;
 		break;
+	case MLXSW_MAX_LAG_ID:
+		resources->max_lag = val;
+		resources->max_lag_valid = 1;
+		break;
+	case MLXSW_MAX_PORTS_IN_LAG_ID:
+		resources->max_ports_in_lag = val;
+		resources->max_ports_in_lag_valid = 1;
+		break;
+	case MLXSW_KVD_SIZE_ID:
+		resources->kvd_size = val;
+		resources->kvd_size_valid = 1;
+		break;
+	case MLXSW_KVD_SINGLE_MIN_SIZE_ID:
+		resources->kvd_single_min_size = val;
+		resources->kvd_single_min_size_valid = 1;
+		break;
+	case MLXSW_KVD_DOUBLE_MIN_SIZE_ID:
+		resources->kvd_double_min_size = val;
+		resources->kvd_double_min_size_valid = 1;
+		break;
+	case MLXSW_MAX_VIRTUAL_ROUTERS_ID:
+		resources->max_virtual_routers = val;
+		resources->max_virtual_routers_valid = 1;
+		break;
+	case MLXSW_MAX_SYSTEM_PORT_ID:
+		resources->max_system_ports = val;
+		resources->max_system_ports_valid = 1;
+		break;
+	case MLXSW_MAX_VLAN_GROUPS_ID:
+		resources->max_vlan_groups = val;
+		resources->max_vlan_groups_valid = 1;
+		break;
+	case MLXSW_MAX_REGIONS_ID:
+		resources->max_regions = val;
+		resources->max_regions_valid = 1;
+		break;
+	case MLXSW_MAX_RIF_ID:
+		resources->max_rif = val;
+		resources->max_rif_valid = 1;
+		break;
 	default:
 		break;
 	}
@@ -1209,10 +1259,52 @@ static int mlxsw_pci_resources_query(struct mlxsw_pci *mlxsw_pci, char *mbox,
 	return -EIO;
 }
 
+static int mlxsw_pci_profile_get_kvd_sizes(const struct mlxsw_config_profile *profile,
+					   struct mlxsw_resources *resources)
+{
+	u32 singles_size, doubles_size, linear_size;
+
+	if (!resources->kvd_single_min_size_valid ||
+	    !resources->kvd_double_min_size_valid ||
+	    !profile->used_kvd_split_data)
+		return -EIO;
+
+	linear_size = profile->kvd_linear_size;
+
+	/* The hash part is what left of the kvd without the
+	 * linear part. It is split to the single size and
+	 * double size by the parts ratio from the profile.
+	 * Both sizes must be a multiplications of the
+	 * granularity from the profile.
+	 */
+	doubles_size = (resources->kvd_size - linear_size);
+	doubles_size *= profile->kvd_hash_double_parts;
+	doubles_size /= (profile->kvd_hash_double_parts +
+			 profile->kvd_hash_single_parts);
+	doubles_size /= profile->kvd_hash_granularity;
+	doubles_size *= profile->kvd_hash_granularity;
+	singles_size = resources->kvd_size - doubles_size -
+		       linear_size;
+
+	/* Check results are legal. */
+	if (singles_size < resources->kvd_single_min_size ||
+	    doubles_size < resources->kvd_double_min_size ||
+	    resources->kvd_size < linear_size)
+		return -EIO;
+
+	resources->kvd_single_size = singles_size;
+	resources->kvd_double_size = doubles_size;
+	resources->kvd_linear_size = linear_size;
+
+	return 0;
+}
+
 static int mlxsw_pci_config_profile(struct mlxsw_pci *mlxsw_pci, char *mbox,
-				    const struct mlxsw_config_profile *profile)
+				    const struct mlxsw_config_profile *profile,
+				    struct mlxsw_resources *resources)
 {
 	int i;
+	int err;
 
 	mlxsw_cmd_mbox_zero(mbox);
 
@@ -1222,18 +1314,6 @@ static int mlxsw_pci_config_profile(struct mlxsw_pci *mlxsw_pci, char *mbox,
 		mlxsw_cmd_mbox_config_profile_max_vepa_channels_set(
 			mbox, profile->max_vepa_channels);
 	}
-	if (profile->used_max_lag) {
-		mlxsw_cmd_mbox_config_profile_set_max_lag_set(
-			mbox, 1);
-		mlxsw_cmd_mbox_config_profile_max_lag_set(
-			mbox, profile->max_lag);
-	}
-	if (profile->used_max_port_per_lag) {
-		mlxsw_cmd_mbox_config_profile_set_max_port_per_lag_set(
-			mbox, 1);
-		mlxsw_cmd_mbox_config_profile_max_port_per_lag_set(
-			mbox, profile->max_port_per_lag);
-	}
 	if (profile->used_max_mid) {
 		mlxsw_cmd_mbox_config_profile_set_max_mid_set(
 			mbox, 1);
@@ -1310,19 +1390,22 @@ static int mlxsw_pci_config_profile(struct mlxsw_pci *mlxsw_pci, char *mbox,
 		mlxsw_cmd_mbox_config_profile_adaptive_routing_group_cap_set(
 			mbox, profile->adaptive_routing_group_cap);
 	}
-	if (profile->used_kvd_sizes) {
-		mlxsw_cmd_mbox_config_profile_set_kvd_linear_size_set(
-			mbox, 1);
-		mlxsw_cmd_mbox_config_profile_kvd_linear_size_set(
-			mbox, profile->kvd_linear_size);
-		mlxsw_cmd_mbox_config_profile_set_kvd_hash_single_size_set(
-			mbox, 1);
-		mlxsw_cmd_mbox_config_profile_kvd_hash_single_size_set(
-			mbox, profile->kvd_hash_single_size);
+	if (resources->kvd_size_valid) {
+		err = mlxsw_pci_profile_get_kvd_sizes(profile, resources);
+		if (err)
+			return err;
+
+		mlxsw_cmd_mbox_config_profile_set_kvd_linear_size_set(mbox, 1);
+		mlxsw_cmd_mbox_config_profile_kvd_linear_size_set(mbox,
+						resources->kvd_linear_size);
+		mlxsw_cmd_mbox_config_profile_set_kvd_hash_single_size_set(mbox,
+									   1);
+		mlxsw_cmd_mbox_config_profile_kvd_hash_single_size_set(mbox,
+						resources->kvd_single_size);
 		mlxsw_cmd_mbox_config_profile_set_kvd_hash_double_size_set(
-			mbox, 1);
-		mlxsw_cmd_mbox_config_profile_kvd_hash_double_size_set(
-			mbox, profile->kvd_hash_double_size);
+								mbox, 1);
+		mlxsw_cmd_mbox_config_profile_kvd_hash_double_size_set(mbox,
+						resources->kvd_double_size);
 	}
 
 	for (i = 0; i < MLXSW_CONFIG_PROFILE_SWID_COUNT; i++)
@@ -1524,7 +1607,7 @@ static int mlxsw_pci_init(void *bus_priv, struct mlxsw_core *mlxsw_core,
 	if (err)
 		goto err_query_resources;
 
-	err = mlxsw_pci_config_profile(mlxsw_pci, mbox, profile);
+	err = mlxsw_pci_config_profile(mlxsw_pci, mbox, profile, resources);
 	if (err)
 		goto err_config_profile;