net/ethernet: sc92031 is not Realtek

While the SC92031 could be found on fake "Realtek" NICs, it has no
relationship to Realtek, and is actually from Silan.

Create a new subdirectory for silan and move sc92031 there.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 0 insertions, 1622 deletions

diff --git a/drivers/net/ethernet/realtek/Kconfig b/drivers/net/ethernet/realtek/Kconfig
index 84083ec6e612..0578859a3c73 100644
--- a/drivers/net/ethernet/realtek/Kconfig
+++ b/drivers/net/ethernet/realtek/Kconfig
@@ -115,16 +115,4 @@ config R8169
 	  To compile this driver as a module, choose M here: the module
 	  will be called r8169.  This is recommended.
 
-config SC92031
-	tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
-	depends on PCI && EXPERIMENTAL
-	select CRC32
-	---help---
-	  This is a driver for the Fast Ethernet PCI network cards based on
-	  the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
-	  have one of these, say Y here.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called sc92031.  This is recommended.
-
 endif # NET_VENDOR_REALTEK
diff --git a/drivers/net/ethernet/realtek/Makefile b/drivers/net/ethernet/realtek/Makefile
index e48cfb6ac42d..71b1da30ecb5 100644
--- a/drivers/net/ethernet/realtek/Makefile
+++ b/drivers/net/ethernet/realtek/Makefile
@@ -6,4 +6,3 @@ obj-$(CONFIG_8139CP) += 8139cp.o
 obj-$(CONFIG_8139TOO) += 8139too.o
 obj-$(CONFIG_ATP) += atp.o
 obj-$(CONFIG_R8169) += r8169.o
-obj-$(CONFIG_SC92031) += sc92031.o
diff --git a/drivers/net/ethernet/realtek/sc92031.c b/drivers/net/ethernet/realtek/sc92031.c
deleted file mode 100644
index a284d6440538..000000000000
--- a/drivers/net/ethernet/realtek/sc92031.c
+++ /dev/null
@@ -1,1609 +0,0 @@
-/*  Silan SC92031 PCI Fast Ethernet Adapter driver
- *
- *  Based on vendor drivers:
- *  Silan Fast Ethernet Netcard Driver:
- *    MODULE_AUTHOR ("gaoyonghong");
- *    MODULE_DESCRIPTION ("SILAN Fast Ethernet driver");
- *    MODULE_LICENSE("GPL");
- *  8139D Fast Ethernet driver:
- *    (C) 2002 by gaoyonghong
- *    MODULE_AUTHOR ("gaoyonghong");
- *    MODULE_DESCRIPTION ("Rsltek 8139D PCI Fast Ethernet Adapter driver");
- *    MODULE_LICENSE("GPL");
- *  Both are almost identical and seem to be based on pci-skeleton.c
- *
- *  Rewritten for 2.6 by Cesar Eduardo Barros
- *
- *  A datasheet for this chip can be found at
- *  http://www.silan.com.cn/english/product/pdf/SC92031AY.pdf 
- */
-
-/* Note about set_mac_address: I don't know how to change the hardware
- * matching, so you need to enable IFF_PROMISC when using it.
- */
-
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/crc32.h>
-
-#include <asm/irq.h>
-
-#define SC92031_NAME "sc92031"
-
-/* BAR 0 is MMIO, BAR 1 is PIO */
-#ifndef SC92031_USE_BAR
-#define SC92031_USE_BAR 0
-#endif
-
-/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). */
-static int multicast_filter_limit = 64;
-module_param(multicast_filter_limit, int, 0);
-MODULE_PARM_DESC(multicast_filter_limit,
-	"Maximum number of filtered multicast addresses");
-
-static int media;
-module_param(media, int, 0);
-MODULE_PARM_DESC(media, "Media type (0x00 = autodetect,"
-	" 0x01 = 10M half, 0x02 = 10M full,"
-	" 0x04 = 100M half, 0x08 = 100M full)");
-
-/* Size of the in-memory receive ring. */
-#define  RX_BUF_LEN_IDX  3 /* 0==8K, 1==16K, 2==32K, 3==64K ,4==128K*/
-#define  RX_BUF_LEN	(8192 << RX_BUF_LEN_IDX)
-
-/* Number of Tx descriptor registers. */
-#define  NUM_TX_DESC	   4
-
-/* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/
-#define  MAX_ETH_FRAME_SIZE	  1536
-
-/* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */
-#define  TX_BUF_SIZE       MAX_ETH_FRAME_SIZE
-#define  TX_BUF_TOT_LEN    (TX_BUF_SIZE * NUM_TX_DESC)
-
-/* The following settings are log_2(bytes)-4:  0 == 16 bytes .. 6==1024, 7==end of packet. */
-#define  RX_FIFO_THRESH    7     /* Rx buffer level before first PCI xfer.  */
-
-/* Time in jiffies before concluding the transmitter is hung. */
-#define  TX_TIMEOUT     (4*HZ)
-
-#define  SILAN_STATS_NUM    2    /* number of ETHTOOL_GSTATS */
-
-/* media options */
-#define  AUTOSELECT    0x00
-#define  M10_HALF      0x01
-#define  M10_FULL      0x02
-#define  M100_HALF     0x04
-#define  M100_FULL     0x08
-
- /* Symbolic offsets to registers. */
-enum  silan_registers {
-   Config0    = 0x00,         // Config0
-   Config1    = 0x04,         // Config1
-   RxBufWPtr  = 0x08,         // Rx buffer writer poiter
-   IntrStatus = 0x0C,         // Interrupt status
-   IntrMask   = 0x10,         // Interrupt mask
-   RxbufAddr  = 0x14,         // Rx buffer start address
-   RxBufRPtr  = 0x18,         // Rx buffer read pointer
-   Txstatusall = 0x1C,        // Transmit status of all descriptors
-   TxStatus0  = 0x20,	      // Transmit status (Four 32bit registers).
-   TxAddr0    = 0x30,         // Tx descriptors (also four 32bit).
-   RxConfig   = 0x40,         // Rx configuration
-   MAC0	      = 0x44,	      // Ethernet hardware address.
-   MAR0	      = 0x4C,	      // Multicast filter.
-   RxStatus0  = 0x54,         // Rx status
-   TxConfig   = 0x5C,         // Tx configuration
-   PhyCtrl    = 0x60,         // physical control
-   FlowCtrlConfig = 0x64,     // flow control
-   Miicmd0    = 0x68,         // Mii command0 register
-   Miicmd1    = 0x6C,         // Mii command1 register
-   Miistatus  = 0x70,         // Mii status register
-   Timercnt   = 0x74,         // Timer counter register
-   TimerIntr  = 0x78,         // Timer interrupt register
-   PMConfig   = 0x7C,         // Power Manager configuration
-   CRC0       = 0x80,         // Power Manager CRC ( Two 32bit regisers)
-   Wakeup0    = 0x88,         // power Manager wakeup( Eight 64bit regiser)
-   LSBCRC0    = 0xC8,         // power Manager LSBCRC(Two 32bit regiser)
-   TestD0     = 0xD0,
-   TestD4     = 0xD4,
-   TestD8     = 0xD8,
-};
-
-#define MII_JAB             16
-#define MII_OutputStatus    24
-
-#define PHY_16_JAB_ENB      0x1000
-#define PHY_16_PORT_ENB     0x1
-
-enum IntrStatusBits {
-   LinkFail       = 0x80000000,
-   LinkOK         = 0x40000000,
-   TimeOut        = 0x20000000,
-   RxOverflow     = 0x0040,
-   RxOK           = 0x0020,
-   TxOK           = 0x0001,
-   IntrBits = LinkFail|LinkOK|TimeOut|RxOverflow|RxOK|TxOK,
-};
-
-enum TxStatusBits {
-   TxCarrierLost = 0x20000000,
-   TxAborted     = 0x10000000,
-   TxOutOfWindow = 0x08000000,
-   TxNccShift    = 22,
-   EarlyTxThresShift = 16,
-   TxStatOK      = 0x8000,
-   TxUnderrun    = 0x4000,
-   TxOwn         = 0x2000,
-};
-
-enum RxStatusBits {
-   RxStatesOK   = 0x80000,
-   RxBadAlign   = 0x40000,
-   RxHugeFrame  = 0x20000,
-   RxSmallFrame = 0x10000,
-   RxCRCOK      = 0x8000,
-   RxCrlFrame   = 0x4000,
-   Rx_Broadcast = 0x2000,
-   Rx_Multicast = 0x1000,
-   RxAddrMatch  = 0x0800,
-   MiiErr       = 0x0400,
-};
-
-enum RxConfigBits {
-   RxFullDx    = 0x80000000,
-   RxEnb       = 0x40000000,
-   RxSmall     = 0x20000000,
-   RxHuge      = 0x10000000,
-   RxErr       = 0x08000000,
-   RxAllphys   = 0x04000000,
-   RxMulticast = 0x02000000,
-   RxBroadcast = 0x01000000,
-   RxLoopBack  = (1 << 23) | (1 << 22),
-   LowThresholdShift  = 12,
-   HighThresholdShift = 2,
-};
-
-enum TxConfigBits {
-   TxFullDx       = 0x80000000,
-   TxEnb          = 0x40000000,
-   TxEnbPad       = 0x20000000,
-   TxEnbHuge      = 0x10000000,
-   TxEnbFCS       = 0x08000000,
-   TxNoBackOff    = 0x04000000,
-   TxEnbPrem      = 0x02000000,
-   TxCareLostCrs  = 0x1000000,
-   TxExdCollNum   = 0xf00000,
-   TxDataRate     = 0x80000,
-};
-
-enum PhyCtrlconfigbits {
-   PhyCtrlAne         = 0x80000000,
-   PhyCtrlSpd100      = 0x40000000,
-   PhyCtrlSpd10       = 0x20000000,
-   PhyCtrlPhyBaseAddr = 0x1f000000,
-   PhyCtrlDux         = 0x800000,
-   PhyCtrlReset       = 0x400000,
-};
-
-enum FlowCtrlConfigBits {
-   FlowCtrlFullDX = 0x80000000,
-   FlowCtrlEnb    = 0x40000000,
-};
-
-enum Config0Bits {
-   Cfg0_Reset  = 0x80000000,
-   Cfg0_Anaoff = 0x40000000,
-   Cfg0_LDPS   = 0x20000000,
-};
-
-enum Config1Bits {
-   Cfg1_EarlyRx = 1 << 31,
-   Cfg1_EarlyTx = 1 << 30,
-
-   //rx buffer size
-   Cfg1_Rcv8K   = 0x0,
-   Cfg1_Rcv16K  = 0x1,
-   Cfg1_Rcv32K  = 0x3,
-   Cfg1_Rcv64K  = 0x7,
-   Cfg1_Rcv128K = 0xf,
-};
-
-enum MiiCmd0Bits {
-   Mii_Divider = 0x20000000,
-   Mii_WRITE   = 0x400000,
-   Mii_READ    = 0x200000,
-   Mii_SCAN    = 0x100000,
-   Mii_Tamod   = 0x80000,
-   Mii_Drvmod  = 0x40000,
-   Mii_mdc     = 0x20000,
-   Mii_mdoen   = 0x10000,
-   Mii_mdo     = 0x8000,
-   Mii_mdi     = 0x4000,
-};
-
-enum MiiStatusBits {
-    Mii_StatusBusy = 0x80000000,
-};
-
-enum PMConfigBits {
-   PM_Enable  = 1 << 31,
-   PM_LongWF  = 1 << 30,
-   PM_Magic   = 1 << 29,
-   PM_LANWake = 1 << 28,
-   PM_LWPTN   = (1 << 27 | 1<< 26),
-   PM_LinkUp  = 1 << 25,
-   PM_WakeUp  = 1 << 24,
-};
-
-/* Locking rules:
- * priv->lock protects most of the fields of priv and most of the
- * hardware registers. It does not have to protect against softirqs
- * between sc92031_disable_interrupts and sc92031_enable_interrupts;
- * it also does not need to be used in ->open and ->stop while the
- * device interrupts are off.
- * Not having to protect against softirqs is very useful due to heavy
- * use of mdelay() at _sc92031_reset.
- * Functions prefixed with _sc92031_ must be called with the lock held;
- * functions prefixed with sc92031_ must be called without the lock held.
- * Use mmiowb() before unlocking if the hardware was written to.
- */
-
-/* Locking rules for the interrupt:
- * - the interrupt and the tasklet never run at the same time
- * - neither run between sc92031_disable_interrupts and
- *   sc92031_enable_interrupt
- */
-
-struct sc92031_priv {
-	spinlock_t		lock;
-	/* iomap.h cookie */
-	void __iomem		*port_base;
-	/* pci device structure */
-	struct pci_dev		*pdev;
-	/* tasklet */
-	struct tasklet_struct	tasklet;
-
-	/* CPU address of rx ring */
-	void			*rx_ring;
-	/* PCI address of rx ring */
-	dma_addr_t		rx_ring_dma_addr;
-	/* PCI address of rx ring read pointer */
-	dma_addr_t		rx_ring_tail;
-
-	/* tx ring write index */
-	unsigned		tx_head;
-	/* tx ring read index */
-	unsigned		tx_tail;
-	/* CPU address of tx bounce buffer */
-	void			*tx_bufs;
-	/* PCI address of tx bounce buffer */
-	dma_addr_t		tx_bufs_dma_addr;
-
-	/* copies of some hardware registers */
-	u32			intr_status;
-	atomic_t		intr_mask;
-	u32			rx_config;
-	u32			tx_config;
-	u32			pm_config;
-
-	/* copy of some flags from dev->flags */
-	unsigned int		mc_flags;
-
-	/* for ETHTOOL_GSTATS */
-	u64			tx_timeouts;
-	u64			rx_loss;
-
-	/* for dev->get_stats */
-	long			rx_value;
-};
-
-/* I don't know which registers can be safely read; however, I can guess
- * MAC0 is one of them. */
-static inline void _sc92031_dummy_read(void __iomem *port_base)
-{
-	ioread32(port_base + MAC0);
-}
-
-static u32 _sc92031_mii_wait(void __iomem *port_base)
-{
-	u32 mii_status;
-
-	do {
-		udelay(10);
-		mii_status = ioread32(port_base + Miistatus);
-	} while (mii_status & Mii_StatusBusy);
-
-	return mii_status;
-}
-
-static u32 _sc92031_mii_cmd(void __iomem *port_base, u32 cmd0, u32 cmd1)
-{
-	iowrite32(Mii_Divider, port_base + Miicmd0);
-
-	_sc92031_mii_wait(port_base);
-
-	iowrite32(cmd1, port_base + Miicmd1);
-	iowrite32(Mii_Divider | cmd0, port_base + Miicmd0);
-
-	return _sc92031_mii_wait(port_base);
-}
-
-static void _sc92031_mii_scan(void __iomem *port_base)
-{
-	_sc92031_mii_cmd(port_base, Mii_SCAN, 0x1 << 6);
-}
-
-static u16 _sc92031_mii_read(void __iomem *port_base, unsigned reg)
-{
-	return _sc92031_mii_cmd(port_base, Mii_READ, reg << 6) >> 13;
-}
-
-static void _sc92031_mii_write(void __iomem *port_base, unsigned reg, u16 val)
-{
-	_sc92031_mii_cmd(port_base, Mii_WRITE, (reg << 6) | ((u32)val << 11));
-}
-
-static void sc92031_disable_interrupts(struct net_device *dev)
-{
-	struct sc92031_priv *priv = netdev_priv(dev);
-	void __iomem *port_base = priv->port_base;
-
-	/* tell the tasklet/interrupt not to enable interrupts */
-	atomic_set(&priv->intr_mask, 0);
-	wmb();
-
-	/* stop interrupts */
-	iowrite32(0, port_base + IntrMask);
-	_sc92031_dummy_read(port_base);
-	mmiowb();
-
-	/* wait for any concurrent interrupt/tasklet to finish */
-	synchronize_irq(dev->irq);
-	tasklet_disable(&priv->tasklet);
-}
-
-static void sc92031_enable_interrupts(struct net_device *dev)
-{
-	struct sc92031_priv *priv = netdev_priv(dev);
-	void __iomem *port_base = priv->port_base;
-
-	tasklet_enable(&priv->tasklet);
-
-	atomic_set(&priv->intr_mask, IntrBits);
-	wmb();
-
-	iowrite32(IntrBits, port_base + IntrMask);
-	mmiowb();
-}
-
-static void _sc92031_disable_tx_rx(struct net_device *dev)
-{
-	struct sc92031_priv *priv = netdev_priv(dev);
-	void __iomem *port_base = priv->port_base;
-
-	priv->rx_config &= ~RxEnb;
-	priv->tx_config &= ~TxEnb;
-	iowrite32(priv->rx_config, port_base + RxConfig);
-	iowrite32(priv->tx_config, port_base + TxConfig);
-}
-
-static void _sc92031_enable_tx_rx(struct net_device *dev)
-{
-	struct sc92031_priv *priv = netdev_priv(dev);
-	void __iomem *port_base = priv->port_base;
-
-	priv->rx_config |= RxEnb;
-	priv->tx_config |= TxEnb;
-	iowrite32(priv->rx_config, port_base + RxConfig);
-	iowrite32(priv->tx_config, port_base + TxConfig);
-}
-
-static void _sc92031_tx_clear(struct net_device *dev)
-{
-	struct sc92031_priv *priv = netdev_priv(dev);
-
-	while (priv->tx_head - priv->tx_tail > 0) {
-		priv->tx_tail++;
-		dev->stats.tx_dropped++;
-	}
-	priv->tx_head = priv->tx_tail = 0;
-}
-
-static void _sc92031_set_mar(struct net_device *dev)
-{
-	struct sc92031_priv *priv = netdev_priv(dev);
-	void __iomem *port_base = priv->port_base;
-	u32 mar0 = 0, mar1 = 0;
-
-	if ((dev->flags & IFF_PROMISC) ||
-	    netdev_mc_count(dev) > multicast_filter_limit ||
-	    (dev->flags & IFF_ALLMULTI))
-		mar0 = mar1 = 0xffffffff;
-	else if (dev->flags & IFF_MULTICAST) {
-		struct netdev_hw_addr *ha;
-
-		netdev_for_each_mc_addr(ha, dev) {
-			u32 crc;
-			unsigned bit = 0;
-
-			crc = ~ether_crc(ETH_ALEN, ha->addr);
-			crc >>= 24;
-
-			if (crc & 0x01)	bit |= 0x02;
-			if (crc & 0x02)	bit |= 0x01;
-			if (crc & 0x10)	bit |= 0x20;
-			if (crc & 0x20)	bit |= 0x10;
-			if (crc & 0x40)	bit |= 0x08;
-			if (crc & 0x80)	bit |= 0x04;
-
-			if (bit > 31)
-				mar0 |= 0x1 << (bit - 32);
-			else
-				mar1 |= 0x1 << bit;
-		}
-	}
-
-	iowrite32(mar0, port_base + MAR0);
-	iowrite32(mar1, port_base + MAR0 + 4);
-}
-
-static void _sc92031_set_rx_config(struct net_device *dev)
-{
-	struct sc92031_priv *priv = netdev_priv(dev);
-	void __iomem *port_base = priv->port_base;
-	unsigned int old_mc_flags;
-	u32 rx_config_bits = 0;
-
-	old_mc_flags = priv->mc_flags;
-
-	if (dev->flags & IFF_PROMISC)
-		rx_config_bits |= RxSmall | RxHuge | RxErr | RxBroadcast
-				| RxMulticast | RxAllphys;
-
-	if (dev->flags & (IFF_ALLMULTI | IFF_MULTICAST))
-		rx_config_bits |= RxMulticast;
-
-	if (dev->flags & IFF_BROADCAST)
-		rx_config_bits |= RxBroadcast;
-
-	priv->rx_config &= ~(RxSmall | RxHuge | RxErr | RxBroadcast
-			| RxMulticast | RxAllphys);
-	priv->rx_config |= rx_config_bits;
-
-	priv->mc_flags = dev->flags & (IFF_PROMISC | IFF_ALLMULTI
-			| IFF_MULTICAST | IFF_BROADCAST);
-
-	if (netif_carrier_ok(dev) && priv->mc_flags != old_mc_flags)
-		iowrite32(priv->rx_config, port_base + RxConfig);
-}
-
-static bool _sc92031_check_media(struct net_device *dev)
-{
-	struct sc92031_priv *priv = netdev_priv(dev);
-	void __iomem *port_base = priv->port_base;
-	u16 bmsr;
-
-	bmsr = _sc92031_mii_read(port_base, MII_BMSR);
-	rmb();
-	if (bmsr & BMSR_LSTATUS) {
-		bool speed_100, duplex_full;
-		u32 flow_ctrl_config = 0;
-		u16 output_status = _sc92031_mii_read(port_base,
-				MII_OutputStatus);
-		_sc92031_mii_scan(port_base);
-
-		speed_100 = output_status & 0x2;
-		duplex_full = output_status & 0x4;
-
-		/* Initial Tx/Rx configuration */
-		priv->rx_config = (0x40 << LowThresholdShift) | (0x1c0 << HighThresholdShift);
-		priv->tx_config = 0x48800000;
-
-		/* NOTE: vendor driver had dead code here to enable tx padding */
-
-		if (!speed_100)
-			priv->tx_config |= 0x80000;
-
-		// configure rx mode
-		_sc92031_set_rx_config(dev);
-
-		if (duplex_full) {
-			priv->rx_config |= RxFullDx;
-			priv->tx_config |= TxFullDx;
-			flow_ctrl_config = FlowCtrlFullDX | FlowCtrlEnb;
-		} else {
-			priv->rx_config &= ~RxFullDx;
-			priv->tx_config &= ~TxFullDx;
-		}
-
-		_sc92031_set_mar(dev);
-		_sc92031_set_rx_config(dev);
-		_sc92031_enable_tx_rx(dev);
-		iowrite32(flow_ctrl_config, port_base + FlowCtrlConfig);
-
-		netif_carrier_on(dev);
-
-		if (printk_ratelimit())
-			printk(KERN_INFO "%s: link up, %sMbps, %s-duplex\n",
-				dev->name,
-				speed_100 ? "100" : "10",
-				duplex_full ? "full" : "half");
-		return true;
-	} else {
-		_sc92031_mii_scan(port_base);
-
-		netif_carrier_off(dev);
-
-		_sc92031_disable_tx_rx(dev);
-
-		if (printk_ratelimit())
-			printk(KERN_INFO "%s: link down\n", dev->name);
-		return false;
-	}
-}
-
-static void _sc92031_phy_reset(struct net_device *dev)
-{
-	struct sc92031_priv *priv = netdev_priv(dev);
-	void __iomem *port_base = priv->port_base;
-	u32 phy_ctrl;
-
-	phy_ctrl = ioread32(port_base + PhyCtrl);
-	phy_ctrl &= ~(PhyCtrlDux | PhyCtrlSpd100 | PhyCtrlSpd10);
-	phy_ctrl |= PhyCtrlAne | PhyCtrlReset;
-
-	switch (media) {
-	default:
-	case AUTOSELECT:
-		phy_ctrl |= PhyCtrlDux | PhyCtrlSpd100 | PhyCtrlSpd10;
-		break;
-	case M10_HALF:
-		phy_ctrl |= PhyCtrlSpd10;
-		break;
-	case M10_FULL:
-		phy_ctrl |= PhyCtrlDux | PhyCtrlSpd10;
-		break;
-	case M100_HALF:
-		phy_ctrl |= PhyCtrlSpd100;
-		break;
-	case M100_FULL:
-		phy_ctrl |= PhyCtrlDux | PhyCtrlSpd100;
-		break;
-	}
-
-	iowrite32(phy_ctrl, port_base + PhyCtrl);
-	mdelay(10);
-
-	phy_ctrl &= ~PhyCtrlReset;
-	iowrite32(phy_ctrl, port_base + PhyCtrl);
-	mdelay(1);
-
-	_sc92031_mii_write(port_base, MII_JAB,
-			PHY_16_JAB_ENB | PHY_16_PORT_ENB);
-	_sc92031_mii_scan(port_base);
-
-	netif_carrier_off(dev);
-	netif_stop_queue(dev);
-}
-
-static void _sc92031_reset(struct net_device *dev)
-{
-	struct sc92031_priv *priv = netdev_priv(dev);
-	void __iomem *port_base = priv->port_base;
-
-	/* disable PM */
-	iowrite32(0, port_base + PMConfig);
-
-	/* soft reset the chip */
-	iowrite32(Cfg0_Reset, port_base + Config0);
-	mdelay(200);
-
-	iowrite32(0, port_base + Config0);
-	mdelay(10);
-
-	/* disable interrupts */
-	iowrite32(0, port_base + IntrMask);
-
-	/* clear multicast address */
-	iowrite32(0, port_base + MAR0);
-	iowrite32(0, port_base + MAR0 + 4);
-
-	/* init rx ring */
-	iowrite32(priv->rx_ring_dma_addr, port_base + RxbufAddr);
-	priv->rx_ring_tail = priv->rx_ring_dma_addr;
-
-	/* init tx ring */
-	_sc92031_tx_clear(dev);
-
-	/* clear old register values */
-	priv->intr_status = 0;
-	atomic_set(&priv->intr_mask, 0);
-	priv->rx_config = 0;
-	priv->tx_config = 0;
-	priv->mc_flags = 0;
-
-	/* configure rx buffer size */
-	/* NOTE: vendor driver had dead code here to enable early tx/rx */
-	iowrite32(Cfg1_Rcv64K, port_base + Config1);
-
-	_sc92031_phy_reset(dev);
-	_sc92031_check_media(dev);
-
-	/* calculate rx fifo overflow */
-	priv->rx_value = 0;
-
-	/* enable PM */
-	iowrite32(priv->pm_config, port_base + PMConfig);
-
-	/* clear intr register */
-	ioread32(port_base + IntrStatus);
-}
-
-static void _sc92031_tx_tasklet(struct net_device *dev)
-{
-	struct sc92031_priv *priv = netdev_priv(dev);
-	void __iomem *port_base = priv->port_base;
-
-	unsigned old_tx_tail;
-	unsigned entry;
-	u32 tx_status;
-
-	old_tx_tail = priv->tx_tail;
-	while (priv->tx_head - priv->tx_tail > 0) {
-		entry = priv->tx_tail % NUM_TX_DESC;
-		tx_status = ioread32(port_base + TxStatus0 + entry * 4);
-
-		if (!(tx_status & (TxStatOK | TxUnderrun | TxAborted)))
-			break;
-
-		priv->tx_tail++;
-
-		if (tx_status & TxStatOK) {
-			dev->stats.tx_bytes += tx_status & 0x1fff;
-			dev->stats.tx_packets++;
-			/* Note: TxCarrierLost is always asserted at 100mbps. */
-			dev->stats.collisions += (tx_status >> 22) & 0xf;
-		}
-
-		if (tx_status & (TxOutOfWindow | TxAborted)) {
-			dev->stats.tx_errors++;
-
-			if (tx_status & TxAborted)
-				dev->stats.tx_aborted_errors++;
-
-			if (tx_status & TxCarrierLost)
-				dev->stats.tx_carrier_errors++;
-
-			if (tx_status & TxOutOfWindow)
-				dev->stats.tx_window_errors++;
-		}
-
-		if (tx_status & TxUnderrun)
-			dev->stats.tx_fifo_errors++;
-	}
-
-	if (priv->tx_tail != old_tx_tail)
-		if (netif_queue_stopped(dev))
-			netif_wake_queue(dev);
-}
-
-static void _sc92031_rx_tasklet_error(struct net_device *dev,
-				      u32 rx_status, unsigned rx_size)
-{
-	if(rx_size > (MAX_ETH_FRAME_SIZE + 4) || rx_size < 16) {
-		dev->stats.rx_errors++;
-		dev->stats.rx_length_errors++;
-	}
-
-	if (!(rx_status & RxStatesOK)) {
-		dev->stats.rx_errors++;
-
-		if (rx_status & (RxHugeFrame | RxSmallFrame))
-			dev->stats.rx_length_errors++;
-
-		if (rx_status & RxBadAlign)
-			dev->stats.rx_frame_errors++;
-
-		if (!(rx_status & RxCRCOK))
-			dev->stats.rx_crc_errors++;
-	} else {
-		struct sc92031_priv *priv = netdev_priv(dev);
-		priv->rx_loss++;
-	}
-}
-
-static void _sc92031_rx_tasklet(struct net_device *dev)
-{
-	struct sc92031_priv *priv = netdev_priv(dev);
-	void __iomem *port_base = priv->port_base;
-
-	dma_addr_t rx_ring_head;
-	unsigned rx_len;
-	unsigned rx_ring_offset;
-	void *rx_ring = priv->rx_ring;
-
-	rx_ring_head = ioread32(port_base + RxBufWPtr);
-	rmb();
-
-	/* rx_ring_head is only 17 bits in the RxBufWPtr register.
-	 * we need to change it to 32 bits physical address
-	 */
-	rx_ring_head &= (dma_addr_t)(RX_BUF_LEN - 1);
-	rx_ring_head |= priv->rx_ring_dma_addr & ~(dma_addr_t)(RX_BUF_LEN - 1);
-	if (rx_ring_head < priv->rx_ring_dma_addr)
-		rx_ring_head += RX_BUF_LEN;
-
-	if (rx_ring_head >= priv->rx_ring_tail)
-		rx_len = rx_ring_head - priv->rx_ring_tail;
-	else
-		rx_len = RX_BUF_LEN - (priv->rx_ring_tail - rx_ring_head);
-
-	if (!rx_len)
-		return;
-
-	if (unlikely(rx_len > RX_BUF_LEN)) {
-		if (printk_ratelimit())
-			printk(KERN_ERR "%s: rx packets length > rx buffer\n",
-					dev->name);
-		return;
-	}
-
-	rx_ring_offset = (priv->rx_ring_tail - priv->rx_ring_dma_addr) % RX_BUF_LEN;
-
-	while (rx_len) {
-		u32 rx_status;
-		unsigned rx_size, rx_size_align, pkt_size;
-		struct sk_buff *skb;
-
-		rx_status = le32_to_cpup((__le32 *)(rx_ring + rx_ring_offset));
-		rmb();
-
-		rx_size = rx_status >> 20;
-		rx_size_align = (rx_size + 3) & ~3;	// for 4 bytes aligned
-		pkt_size = rx_size - 4;	// Omit the four octet CRC from the length.
-
-		rx_ring_offset = (rx_ring_offset + 4) % RX_BUF_LEN;
-
-		if (unlikely(rx_status == 0 ||
-			     rx_size > (MAX_ETH_FRAME_SIZE + 4) ||
-			     rx_size < 16 ||
-			     !(rx_status & RxStatesOK))) {
-			_sc92031_rx_tasklet_error(dev, rx_status, rx_size);
-			break;
-		}
-
-		if (unlikely(rx_size_align + 4 > rx_len)) {
-			if (printk_ratelimit())
-				printk(KERN_ERR "%s: rx_len is too small\n", dev->name);
-			break;
-		}
-
-		rx_len -= rx_size_align + 4;
-
-		skb = netdev_alloc_skb_ip_align(dev, pkt_size);
-		if (unlikely(!skb)) {
-			if (printk_ratelimit())
-				printk(KERN_ERR "%s: Couldn't allocate a skb_buff for a packet of size %u\n",
-						dev->name, pkt_size);
-			goto next;
-		}
-
-		if ((rx_ring_offset + pkt_size) > RX_BUF_LEN) {
-			memcpy(skb_put(skb, RX_BUF_LEN - rx_ring_offset),
-				rx_ring + rx_ring_offset, RX_BUF_LEN - rx_ring_offset);
-			memcpy(skb_put(skb, pkt_size - (RX_BUF_LEN - rx_ring_offset)),
-				rx_ring, pkt_size - (RX_BUF_LEN - rx_ring_offset));
-		} else {
-			memcpy(skb_put(skb, pkt_size), rx_ring + rx_ring_offset, pkt_size);
-		}
-
-		skb->protocol = eth_type_trans(skb, dev);
-		netif_rx(skb);
-
-		dev->stats.rx_bytes += pkt_size;
-		dev->stats.rx_packets++;
-
-		if (rx_status & Rx_Multicast)
-			dev->stats.multicast++;
-
-	next:
-		rx_ring_offset = (rx_ring_offset + rx_size_align) % RX_BUF_LEN;
-	}
-	mb();
-
-	priv->rx_ring_tail = rx_ring_head;
-	iowrite32(priv->rx_ring_tail, port_base + RxBufRPtr);
-}
-
-static void _sc92031_link_tasklet(struct net_device *dev)
-{
-	if (_sc92031_check_media(dev))
-		netif_wake_queue(dev);
-	else {
-		netif_stop_queue(dev);
-		dev->stats.tx_carrier_errors++;
-	}
-}
-
-static void sc92031_tasklet(unsigned long data)
-{
-	struct net_device *dev = (struct net_device *)data;
-	struct sc92031_priv *priv = netdev_priv(dev);
-	void __iomem *port_base = priv->port_base;
-	u32 intr_status, intr_mask;
-
-	intr_status = priv->intr_status;
-
-	spin_lock(&priv->lock);
-
-	if (unlikely(!netif_running(dev)))
-		goto out;
-
-	if (intr_status & TxOK)
-		_sc92031_tx_tasklet(dev);
-
-	if (intr_status & RxOK)
-		_sc92031_rx_tasklet(dev);
-
-	if (intr_status & RxOverflow)
-		dev->stats.rx_errors++;
-
-	if (intr_status & TimeOut) {
-		dev->stats.rx_errors++;
-		dev->stats.rx_length_errors++;
-	}
-
-	if (intr_status & (LinkFail | LinkOK))
-		_sc92031_link_tasklet(dev);
-
-out:
-	intr_mask = atomic_read(&priv->intr_mask);
-	rmb();
-
-	iowrite32(intr_mask, port_base + IntrMask);
-	mmiowb();
-
-	spin_unlock(&priv->lock);
-}
-
-static irqreturn_t sc92031_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	struct sc92031_priv *priv = netdev_priv(dev);
-	void __iomem *port_base = priv->port_base;
-	u32 intr_status, intr_mask;
-
-	/* mask interrupts before clearing IntrStatus */
-	iowrite32(0, port_base + IntrMask);
-	_sc92031_dummy_read(port_base);
-
-	intr_status = ioread32(port_base + IntrStatus);
-	if (unlikely(intr_status == 0xffffffff))
-		return IRQ_NONE;	// hardware has gone missing
-
-	intr_status &= IntrBits;
-	if (!intr_status)
-		goto out_none;
-
-	priv->intr_status = intr_status;
-	tasklet_schedule(&priv->tasklet);
-
-	return IRQ_HANDLED;
-
-out_none:
-	intr_mask = atomic_read(&priv->intr_mask);
-	rmb();
-
-	iowrite32(intr_mask, port_base + IntrMask);
-	mmiowb();
-
-	return IRQ_NONE;
-}
-
-static struct net_device_stats *sc92031_get_stats(struct net_device *dev)
-{
-	struct sc92031_priv *priv = netdev_priv(dev);
-	void __iomem *port_base = priv->port_base;
-
-	// FIXME I do not understand what is this trying to do.
-	if (netif_running(dev)) {
-		int temp;
-
-		spin_lock_bh(&priv->lock);
-
-		/* Update the error count. */
-		temp = (ioread32(port_base + RxStatus0) >> 16) & 0xffff;
-
-		if (temp == 0xffff) {
-			priv->rx_value += temp;
-			dev->stats.rx_fifo_errors = priv->rx_value;
-		} else
-			dev->stats.rx_fifo_errors = temp + priv->rx_value;
-
-		spin_unlock_bh(&priv->lock);
-	}
-
-	return &dev->stats;
-}
-
-static netdev_tx_t sc92031_start_xmit(struct sk_buff *skb,
-				      struct net_device *dev)
-{
-	struct sc92031_priv *priv = netdev_priv(dev);
-	void __iomem *port_base = priv->port_base;
-	unsigned len;
-	unsigned entry;
-	u32 tx_status;
-
-	if (unlikely(skb->len > TX_BUF_SIZE)) {
-		dev->stats.tx_dropped++;
-		goto out;
-	}
-
-	spin_lock(&priv->lock);
-
-	if (unlikely(!netif_carrier_ok(dev))) {
-		dev->stats.tx_dropped++;
-		goto out_unlock;
-	}
-
-	BUG_ON(priv->tx_head - priv->tx_tail >= NUM_TX_DESC);
-
-	entry = priv->tx_head++ % NUM_TX_DESC;
-
-	skb_copy_and_csum_dev(skb, priv->tx_bufs + entry * TX_BUF_SIZE);
-
-	len = skb->len;
-	if (len < ETH_ZLEN) {
-		memset(priv->tx_bufs + entry * TX_BUF_SIZE + len,
-				0, ETH_ZLEN - len);
-		len = ETH_ZLEN;
-	}
-
-	wmb();
-
-	if (len < 100)
-		tx_status = len;
-	else if (len < 300)
-		tx_status = 0x30000 | len;
-	else
-		tx_status = 0x50000 | len;
-
-	iowrite32(priv->tx_bufs_dma_addr + entry * TX_BUF_SIZE,
-			port_base + TxAddr0 + entry * 4);
-	iowrite32(tx_status, port_base + TxStatus0 + entry * 4);
-	mmiowb();
-
-	if (priv->tx_head - priv->tx_tail >= NUM_TX_DESC)
-		netif_stop_queue(dev);
-
-out_unlock:
-	spin_unlock(&priv->lock);
-
-out:
-	dev_kfree_skb(skb);
-
-	return NETDEV_TX_OK;
-}
-
-static int sc92031_open(struct net_device *dev)
-{
-	int err;
-	struct sc92031_priv *priv = netdev_priv(dev);
-	struct pci_dev *pdev = priv->pdev;
-
-	priv->rx_ring = pci_alloc_consistent(pdev, RX_BUF_LEN,
-			&priv->rx_ring_dma_addr);
-	if (unlikely(!priv->rx_ring)) {
-		err = -ENOMEM;
-		goto out_alloc_rx_ring;
-	}
-
-	priv->tx_bufs = pci_alloc_consistent(pdev, TX_BUF_TOT_LEN,
-			&priv->tx_bufs_dma_addr);
-	if (unlikely(!priv->tx_bufs)) {
-		err = -ENOMEM;
-		goto out_alloc_tx_bufs;
-	}
-	priv->tx_head = priv->tx_tail = 0;
-
-	err = request_irq(pdev->irq, sc92031_interrupt,
-			IRQF_SHARED, dev->name, dev);
-	if (unlikely(err < 0))
-		goto out_request_irq;
-
-	priv->pm_config = 0;
-
-	/* Interrupts already disabled by sc92031_stop or sc92031_probe */
-	spin_lock_bh(&priv->lock);
-
-	_sc92031_reset(dev);
-	mmiowb();
-
-	spin_unlock_bh(&priv->lock);
-	sc92031_enable_interrupts(dev);
-
-	if (netif_carrier_ok(dev))
-		netif_start_queue(dev);
-	else
-		netif_tx_disable(dev);
-
-	return 0;
-
-out_request_irq:
-	pci_free_consistent(pdev, TX_BUF_TOT_LEN, priv->tx_bufs,
-			priv->tx_bufs_dma_addr);
-out_alloc_tx_bufs:
-	pci_free_consistent(pdev, RX_BUF_LEN, priv->rx_ring,
-			priv->rx_ring_dma_addr);
-out_alloc_rx_ring:
-	return err;
-}
-
-static int sc92031_stop(struct net_device *dev)
-{
-	struct sc92031_priv *priv = netdev_priv(dev);
-	struct pci_dev *pdev = priv->pdev;
-
-	netif_tx_disable(dev);
-
-	/* Disable interrupts, stop Tx and Rx. */
-	sc92031_disable_interrupts(dev);
-
-	spin_lock_bh(&priv->lock);
-
-	_sc92031_disable_tx_rx(dev);
-	_sc92031_tx_clear(dev);
-	mmiowb();
-
-	spin_unlock_bh(&priv->lock);
-
-	free_irq(pdev->irq, dev);
-	pci_free_consistent(pdev, TX_BUF_TOT_LEN, priv->tx_bufs,
-			priv->tx_bufs_dma_addr);
-	pci_free_consistent(pdev, RX_BUF_LEN, priv->rx_ring,
-			priv->rx_ring_dma_addr);
-
-	return 0;
-}
-
-static void sc92031_set_multicast_list(struct net_device *dev)
-{
-	struct sc92031_priv *priv = netdev_priv(dev);
-
-	spin_lock_bh(&priv->lock);
-
-	_sc92031_set_mar(dev);
-	_sc92031_set_rx_config(dev);
-	mmiowb();
-
-	spin_unlock_bh(&priv->lock);
-}
-
-static void sc92031_tx_timeout(struct net_device *dev)
-{
-	struct sc92031_priv *priv = netdev_priv(dev);
-
-	/* Disable interrupts by clearing the interrupt mask.*/
-	sc92031_disable_interrupts(dev);
-
-	spin_lock(&priv->lock);
-
-	priv->tx_timeouts++;
-
-	_sc92031_reset(dev);
-	mmiowb();
-
-	spin_unlock(&priv->lock);
-
-	/* enable interrupts */
-	sc92031_enable_interrupts(dev);
-
-	if (netif_carrier_ok(dev))
-		netif_wake_queue(dev);
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void sc92031_poll_controller(struct net_device *dev)
-{
-	disable_irq(dev->irq);
-	if (sc92031_interrupt(dev->irq, dev) != IRQ_NONE)
-		sc92031_tasklet((unsigned long)dev);
-	enable_irq(dev->irq);
-}
-#endif
-
-static int sc92031_ethtool_get_settings(struct net_device *dev,
-		struct ethtool_cmd *cmd)
-{
-	struct sc92031_priv *priv = netdev_priv(dev);
-	void __iomem *port_base = priv->port_base;
-	u8 phy_address;
-	u32 phy_ctrl;
-	u16 output_status;
-
-	spin_lock_bh(&priv->lock);
-
-	phy_address = ioread32(port_base + Miicmd1) >> 27;
-	phy_ctrl = ioread32(port_base + PhyCtrl);
-
-	output_status = _sc92031_mii_read(port_base, MII_OutputStatus);
-	_sc92031_mii_scan(port_base);
-	mmiowb();
-
-	spin_unlock_bh(&priv->lock);
-
-	cmd->supported = SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full
-			| SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full
-			| SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII;
-
-	cmd->advertising = ADVERTISED_TP | ADVERTISED_MII;
-
-	if ((phy_ctrl & (PhyCtrlDux | PhyCtrlSpd100 | PhyCtrlSpd10))
-			== (PhyCtrlDux | PhyCtrlSpd100 | PhyCtrlSpd10))
-		cmd->advertising |= ADVERTISED_Autoneg;
-
-	if ((phy_ctrl & PhyCtrlSpd10) == PhyCtrlSpd10)
-		cmd->advertising |= ADVERTISED_10baseT_Half;
-
-	if ((phy_ctrl & (PhyCtrlSpd10 | PhyCtrlDux))
-			== (PhyCtrlSpd10 | PhyCtrlDux))
-		cmd->advertising |= ADVERTISED_10baseT_Full;
-
-	if ((phy_ctrl & PhyCtrlSpd100) == PhyCtrlSpd100)
-		cmd->advertising |= ADVERTISED_100baseT_Half;
-
-	if ((phy_ctrl & (PhyCtrlSpd100 | PhyCtrlDux))
-			== (PhyCtrlSpd100 | PhyCtrlDux))
-		cmd->advertising |= ADVERTISED_100baseT_Full;
-
-	if (phy_ctrl & PhyCtrlAne)
-		cmd->advertising |= ADVERTISED_Autoneg;
-
-	ethtool_cmd_speed_set(cmd,
-			      (output_status & 0x2) ? SPEED_100 : SPEED_10);
-	cmd->duplex = (output_status & 0x4) ? DUPLEX_FULL : DUPLEX_HALF;
-	cmd->port = PORT_MII;
-	cmd->phy_address = phy_address;
-	cmd->transceiver = XCVR_INTERNAL;
-	cmd->autoneg = (phy_ctrl & PhyCtrlAne) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
-
-	return 0;
-}
-
-static int sc92031_ethtool_set_settings(struct net_device *dev,
-		struct ethtool_cmd *cmd)
-{
-	struct sc92031_priv *priv = netdev_priv(dev);
-	void __iomem *port_base = priv->port_base;
-	u32 speed = ethtool_cmd_speed(cmd);
-	u32 phy_ctrl;
-	u32 old_phy_ctrl;
-
-	if (!(speed == SPEED_10 || speed == SPEED_100))
-		return -EINVAL;
-	if (!(cmd->duplex == DUPLEX_HALF || cmd->duplex == DUPLEX_FULL))
-		return -EINVAL;
-	if (!(cmd->port == PORT_MII))
-		return -EINVAL;
-	if (!(cmd->phy_address == 0x1f))
-		return -EINVAL;
-	if (!(cmd->transceiver == XCVR_INTERNAL))
-		return -EINVAL;
-	if (!(cmd->autoneg == AUTONEG_DISABLE || cmd->autoneg == AUTONEG_ENABLE))
-		return -EINVAL;
-
-	if (cmd->autoneg == AUTONEG_ENABLE) {
-		if (!(cmd->advertising & (ADVERTISED_Autoneg
-				| ADVERTISED_100baseT_Full
-				| ADVERTISED_100baseT_Half
-				| ADVERTISED_10baseT_Full
-				| ADVERTISED_10baseT_Half)))
-			return -EINVAL;
-
-		phy_ctrl = PhyCtrlAne;
-
-		// FIXME: I'm not sure what the original code was trying to do
-		if (cmd->advertising & ADVERTISED_Autoneg)
-			phy_ctrl |= PhyCtrlDux | PhyCtrlSpd100 | PhyCtrlSpd10;
-		if (cmd->advertising & ADVERTISED_100baseT_Full)
-			phy_ctrl |= PhyCtrlDux | PhyCtrlSpd100;
-		if (cmd->advertising & ADVERTISED_100baseT_Half)
-			phy_ctrl |= PhyCtrlSpd100;
-		if (cmd->advertising & ADVERTISED_10baseT_Full)
-			phy_ctrl |= PhyCtrlSpd10 | PhyCtrlDux;
-		if (cmd->advertising & ADVERTISED_10baseT_Half)
-			phy_ctrl |= PhyCtrlSpd10;
-	} else {
-		// FIXME: Whole branch guessed
-		phy_ctrl = 0;
-
-		if (speed == SPEED_10)
-			phy_ctrl |= PhyCtrlSpd10;
-		else /* cmd->speed == SPEED_100 */
-			phy_ctrl |= PhyCtrlSpd100;
-
-		if (cmd->duplex == DUPLEX_FULL)
-			phy_ctrl |= PhyCtrlDux;
-	}
-
-	spin_lock_bh(&priv->lock);
-
-	old_phy_ctrl = ioread32(port_base + PhyCtrl);
-	phy_ctrl |= old_phy_ctrl & ~(PhyCtrlAne | PhyCtrlDux
-			| PhyCtrlSpd100 | PhyCtrlSpd10);
-	if (phy_ctrl != old_phy_ctrl)
-		iowrite32(phy_ctrl, port_base + PhyCtrl);
-
-	spin_unlock_bh(&priv->lock);
-
-	return 0;
-}
-
-static void sc92031_ethtool_get_wol(struct net_device *dev,
-		struct ethtool_wolinfo *wolinfo)
-{
-	struct sc92031_priv *priv = netdev_priv(dev);
-	void __iomem *port_base = priv->port_base;
-	u32 pm_config;
-
-	spin_lock_bh(&priv->lock);
-	pm_config = ioread32(port_base + PMConfig);
-	spin_unlock_bh(&priv->lock);
-
-	// FIXME: Guessed
-	wolinfo->supported = WAKE_PHY | WAKE_MAGIC
-			| WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;
-	wolinfo->wolopts = 0;
-
-	if (pm_config & PM_LinkUp)
-		wolinfo->wolopts |= WAKE_PHY;
-
-	if (pm_config & PM_Magic)
-		wolinfo->wolopts |= WAKE_MAGIC;
-
-	if (pm_config & PM_WakeUp)
-		// FIXME: Guessed
-		wolinfo->wolopts |= WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;
-}
-
-static int sc92031_ethtool_set_wol(struct net_device *dev,
-		struct ethtool_wolinfo *wolinfo)
-{
-	struct sc92031_priv *priv = netdev_priv(dev);
-	void __iomem *port_base = priv->port_base;
-	u32 pm_config;
-
-	spin_lock_bh(&priv->lock);
-
-	pm_config = ioread32(port_base + PMConfig)
-			& ~(PM_LinkUp | PM_Magic | PM_WakeUp);
-
-	if (wolinfo->wolopts & WAKE_PHY)
-		pm_config |= PM_LinkUp;
-
-	if (wolinfo->wolopts & WAKE_MAGIC)
-		pm_config |= PM_Magic;
-
-	// FIXME: Guessed
-	if (wolinfo->wolopts & (WAKE_UCAST | WAKE_MCAST | WAKE_BCAST))
-		pm_config |= PM_WakeUp;
-
-	priv->pm_config = pm_config;
-	iowrite32(pm_config, port_base + PMConfig);
-	mmiowb();
-
-	spin_unlock_bh(&priv->lock);
-
-	return 0;
-}
-
-static int sc92031_ethtool_nway_reset(struct net_device *dev)
-{
-	int err = 0;
-	struct sc92031_priv *priv = netdev_priv(dev);
-	void __iomem *port_base = priv->port_base;
-	u16 bmcr;
-
-	spin_lock_bh(&priv->lock);
-
-	bmcr = _sc92031_mii_read(port_base, MII_BMCR);
-	if (!(bmcr & BMCR_ANENABLE)) {
-		err = -EINVAL;
-		goto out;
-	}
-
-	_sc92031_mii_write(port_base, MII_BMCR, bmcr | BMCR_ANRESTART);
-
-out:
-	_sc92031_mii_scan(port_base);
-	mmiowb();
-
-	spin_unlock_bh(&priv->lock);
-
-	return err;
-}
-
-static const char sc92031_ethtool_stats_strings[SILAN_STATS_NUM][ETH_GSTRING_LEN] = {
-	"tx_timeout",
-	"rx_loss",
-};
-
-static void sc92031_ethtool_get_strings(struct net_device *dev,
-		u32 stringset, u8 *data)
-{
-	if (stringset == ETH_SS_STATS)
-		memcpy(data, sc92031_ethtool_stats_strings,
-				SILAN_STATS_NUM * ETH_GSTRING_LEN);
-}
-
-static int sc92031_ethtool_get_sset_count(struct net_device *dev, int sset)
-{
-	switch (sset) {
-	case ETH_SS_STATS:
-		return SILAN_STATS_NUM;
-	default:
-		return -EOPNOTSUPP;
-	}
-}
-
-static void sc92031_ethtool_get_ethtool_stats(struct net_device *dev,
-		struct ethtool_stats *stats, u64 *data)
-{
-	struct sc92031_priv *priv = netdev_priv(dev);
-
-	spin_lock_bh(&priv->lock);
-	data[0] = priv->tx_timeouts;
-	data[1] = priv->rx_loss;
-	spin_unlock_bh(&priv->lock);
-}
-
-static const struct ethtool_ops sc92031_ethtool_ops = {
-	.get_settings		= sc92031_ethtool_get_settings,
-	.set_settings		= sc92031_ethtool_set_settings,
-	.get_wol		= sc92031_ethtool_get_wol,
-	.set_wol		= sc92031_ethtool_set_wol,
-	.nway_reset		= sc92031_ethtool_nway_reset,
-	.get_link		= ethtool_op_get_link,
-	.get_strings		= sc92031_ethtool_get_strings,
-	.get_sset_count		= sc92031_ethtool_get_sset_count,
-	.get_ethtool_stats	= sc92031_ethtool_get_ethtool_stats,
-};
-
-
-static const struct net_device_ops sc92031_netdev_ops = {
-	.ndo_get_stats		= sc92031_get_stats,
-	.ndo_start_xmit		= sc92031_start_xmit,
-	.ndo_open		= sc92031_open,
-	.ndo_stop		= sc92031_stop,
-	.ndo_set_rx_mode	= sc92031_set_multicast_list,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address 	= eth_mac_addr,
-	.ndo_tx_timeout		= sc92031_tx_timeout,
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	.ndo_poll_controller	= sc92031_poll_controller,
-#endif
-};
-
-static int __devinit sc92031_probe(struct pci_dev *pdev,
-		const struct pci_device_id *id)
-{
-	int err;
-	void __iomem* port_base;
-	struct net_device *dev;
-	struct sc92031_priv *priv;
-	u32 mac0, mac1;
-	unsigned long base_addr;
-
-	err = pci_enable_device(pdev);
-	if (unlikely(err < 0))
-		goto out_enable_device;
-
-	pci_set_master(pdev);
-
-	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
-	if (unlikely(err < 0))
-		goto out_set_dma_mask;
-
-	err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
-	if (unlikely(err < 0))
-		goto out_set_dma_mask;
-
-	err = pci_request_regions(pdev, SC92031_NAME);
-	if (unlikely(err < 0))
-		goto out_request_regions;
-
-	port_base = pci_iomap(pdev, SC92031_USE_BAR, 0);
-	if (unlikely(!port_base)) {
-		err = -EIO;
-		goto out_iomap;
-	}
-
-	dev = alloc_etherdev(sizeof(struct sc92031_priv));
-	if (unlikely(!dev)) {
-		err = -ENOMEM;
-		goto out_alloc_etherdev;
-	}
-
-	pci_set_drvdata(pdev, dev);
-	SET_NETDEV_DEV(dev, &pdev->dev);
-
-#if SC92031_USE_BAR == 0
-	dev->mem_start = pci_resource_start(pdev, SC92031_USE_BAR);
-	dev->mem_end = pci_resource_end(pdev, SC92031_USE_BAR);
-#elif SC92031_USE_BAR == 1
-	dev->base_addr = pci_resource_start(pdev, SC92031_USE_BAR);
-#endif
-	dev->irq = pdev->irq;
-
-	/* faked with skb_copy_and_csum_dev */
-	dev->features = NETIF_F_SG | NETIF_F_HIGHDMA |
-		NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
-
-	dev->netdev_ops		= &sc92031_netdev_ops;
-	dev->watchdog_timeo	= TX_TIMEOUT;
-	dev->ethtool_ops	= &sc92031_ethtool_ops;
-
-	priv = netdev_priv(dev);
-	spin_lock_init(&priv->lock);
-	priv->port_base = port_base;
-	priv->pdev = pdev;
-	tasklet_init(&priv->tasklet, sc92031_tasklet, (unsigned long)dev);
-	/* Fudge tasklet count so the call to sc92031_enable_interrupts at
-	 * sc92031_open will work correctly */
-	tasklet_disable_nosync(&priv->tasklet);
-
-	/* PCI PM Wakeup */
-	iowrite32((~PM_LongWF & ~PM_LWPTN) | PM_Enable, port_base + PMConfig);
-
-	mac0 = ioread32(port_base + MAC0);
-	mac1 = ioread32(port_base + MAC0 + 4);
-	dev->dev_addr[0] = dev->perm_addr[0] = mac0 >> 24;
-	dev->dev_addr[1] = dev->perm_addr[1] = mac0 >> 16;
-	dev->dev_addr[2] = dev->perm_addr[2] = mac0 >> 8;
-	dev->dev_addr[3] = dev->perm_addr[3] = mac0;
-	dev->dev_addr[4] = dev->perm_addr[4] = mac1 >> 8;
-	dev->dev_addr[5] = dev->perm_addr[5] = mac1;
-
-	err = register_netdev(dev);
-	if (err < 0)
-		goto out_register_netdev;
-
-#if SC92031_USE_BAR == 0
-	base_addr = dev->mem_start;
-#elif SC92031_USE_BAR == 1
-	base_addr = dev->base_addr;
-#endif
-	printk(KERN_INFO "%s: SC92031 at 0x%lx, %pM, IRQ %d\n", dev->name,
-			base_addr, dev->dev_addr, dev->irq);
-
-	return 0;
-
-out_register_netdev:
-	free_netdev(dev);
-out_alloc_etherdev:
-	pci_iounmap(pdev, port_base);
-out_iomap:
-	pci_release_regions(pdev);
-out_request_regions:
-out_set_dma_mask:
-	pci_disable_device(pdev);
-out_enable_device:
-	return err;
-}
-
-static void __devexit sc92031_remove(struct pci_dev *pdev)
-{
-	struct net_device *dev = pci_get_drvdata(pdev);
-	struct sc92031_priv *priv = netdev_priv(dev);
-	void __iomem* port_base = priv->port_base;
-
-	unregister_netdev(dev);
-	free_netdev(dev);
-	pci_iounmap(pdev, port_base);
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
-}
-
-static int sc92031_suspend(struct pci_dev *pdev, pm_message_t state)
-{
-	struct net_device *dev = pci_get_drvdata(pdev);
-	struct sc92031_priv *priv = netdev_priv(dev);
-
-	pci_save_state(pdev);
-
-	if (!netif_running(dev))
-		goto out;
-
-	netif_device_detach(dev);
-
-	/* Disable interrupts, stop Tx and Rx. */
-	sc92031_disable_interrupts(dev);
-
-	spin_lock_bh(&priv->lock);
-
-	_sc92031_disable_tx_rx(dev);
-	_sc92031_tx_clear(dev);
-	mmiowb();
-
-	spin_unlock_bh(&priv->lock);
-
-out:
-	pci_set_power_state(pdev, pci_choose_state(pdev, state));
-
-	return 0;
-}
-
-static int sc92031_resume(struct pci_dev *pdev)
-{
-	struct net_device *dev = pci_get_drvdata(pdev);
-	struct sc92031_priv *priv = netdev_priv(dev);
-
-	pci_restore_state(pdev);
-	pci_set_power_state(pdev, PCI_D0);
-
-	if (!netif_running(dev))
-		goto out;
-
-	/* Interrupts already disabled by sc92031_suspend */
-	spin_lock_bh(&priv->lock);
-
-	_sc92031_reset(dev);
-	mmiowb();
-
-	spin_unlock_bh(&priv->lock);
-	sc92031_enable_interrupts(dev);
-
-	netif_device_attach(dev);
-
-	if (netif_carrier_ok(dev))
-		netif_wake_queue(dev);
-	else
-		netif_tx_disable(dev);
-
-out:
-	return 0;
-}
-
-static DEFINE_PCI_DEVICE_TABLE(sc92031_pci_device_id_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_SILAN, 0x2031) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_SILAN, 0x8139) },
-	{ PCI_DEVICE(0x1088, 0x2031) },
-	{ 0, }
-};
-MODULE_DEVICE_TABLE(pci, sc92031_pci_device_id_table);
-
-static struct pci_driver sc92031_pci_driver = {
-	.name		= SC92031_NAME,
-	.id_table	= sc92031_pci_device_id_table,
-	.probe		= sc92031_probe,
-	.remove		= __devexit_p(sc92031_remove),
-	.suspend	= sc92031_suspend,
-	.resume		= sc92031_resume,
-};
-
-static int __init sc92031_init(void)
-{
-	return pci_register_driver(&sc92031_pci_driver);
-}
-
-static void __exit sc92031_exit(void)
-{
-	pci_unregister_driver(&sc92031_pci_driver);
-}
-
-module_init(sc92031_init);
-module_exit(sc92031_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Cesar Eduardo Barros <cesarb@cesarb.net>");
-MODULE_DESCRIPTION("Silan SC92031 PCI Fast Ethernet Adapter driver");