Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Some highlights from this development cycle:

   1) Big refactoring of ipv6 route and neigh handling to support
      nexthop objects configurable as units from userspace. From David
      Ahern.

   2) Convert explored_states in BPF verifier into a hash table,
      significantly decreased state held for programs with bpf2bpf
      calls, from Alexei Starovoitov.

   3) Implement bpf_send_signal() helper, from Yonghong Song.

   4) Various classifier enhancements to mvpp2 driver, from Maxime
      Chevallier.

   5) Add aRFS support to hns3 driver, from Jian Shen.

   6) Fix use after free in inet frags by allocating fqdirs dynamically
      and reworking how rhashtable dismantle occurs, from Eric Dumazet.

   7) Add act_ctinfo packet classifier action, from Kevin
      Darbyshire-Bryant.

   8) Add TFO key backup infrastructure, from Jason Baron.

   9) Remove several old and unused ISDN drivers, from Arnd Bergmann.

  10) Add devlink notifications for flash update status to mlxsw driver,
      from Jiri Pirko.

  11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski.

  12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes.

  13) Various enhancements to ipv6 flow label handling, from Eric
      Dumazet and Willem de Bruijn.

  14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van
      der Merwe, and others.

  15) Various improvements to axienet driver including converting it to
      phylink, from Robert Hancock.

  16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean.

  17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana
      Radulescu.

  18) Add devlink health reporting to mlx5, from Moshe Shemesh.

  19) Convert stmmac over to phylink, from Jose Abreu.

  20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from
      Shalom Toledo.

  21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera.

  22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel.

  23) Track spill/fill of constants in BPF verifier, from Alexei
      Starovoitov.

  24) Support bounded loops in BPF, from Alexei Starovoitov.

  25) Various page_pool API fixes and improvements, from Jesper Dangaard
      Brouer.

  26) Just like ipv4, support ref-countless ipv6 route handling. From
      Wei Wang.

  27) Support VLAN offloading in aquantia driver, from Igor Russkikh.

  28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy.

  29) Add flower GRE encap/decap support to nfp driver, from Pieter
      Jansen van Vuuren.

  30) Protect against stack overflow when using act_mirred, from John
      Hurley.

  31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen.

  32) Use page_pool API in netsec driver, Ilias Apalodimas.

  33) Add Google gve network driver, from Catherine Sullivan.

  34) More indirect call avoidance, from Paolo Abeni.

  35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan.

  36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek.

  37) Add MPLS manipulation actions to TC, from John Hurley.

  38) Add sending a packet to connection tracking from TC actions, and
      then allow flower classifier matching on conntrack state. From
      Paul Blakey.

  39) Netfilter hw offload support, from Pablo Neira Ayuso"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits)
  net/mlx5e: Return in default case statement in tx_post_resync_params
  mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().
  net: dsa: add support for BRIDGE_MROUTER attribute
  pkt_sched: Include const.h
  net: netsec: remove static declaration for netsec_set_tx_de()
  net: netsec: remove superfluous if statement
  netfilter: nf_tables: add hardware offload support
  net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload
  net: flow_offload: add flow_block_cb_is_busy() and use it
  net: sched: remove tcf block API
  drivers: net: use flow block API
  net: sched: use flow block API
  net: flow_offload: add flow_block_cb_{priv, incref, decref}()
  net: flow_offload: add list handling functions
  net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()
  net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*
  net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND
  net: flow_offload: add flow_block_cb_setup_simple()
  net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
  net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC
  ...

7 files changed, 751 insertions, 362 deletions

diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xilinx/Kconfig
index af96e05c5bcd..8d994cebb6b0 100644
--- a/drivers/net/ethernet/xilinx/Kconfig
+++ b/drivers/net/ethernet/xilinx/Kconfig
@@ -6,7 +6,7 @@
 config NET_VENDOR_XILINX
 	bool "Xilinx devices"
 	default y
-	depends on PPC || PPC32 || MICROBLAZE || ARCH_ZYNQ || MIPS || X86 || COMPILE_TEST
+	depends on PPC || PPC32 || MICROBLAZE || ARCH_ZYNQ || MIPS || X86 || ARM || COMPILE_TEST
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y.
 
@@ -26,8 +26,8 @@ config XILINX_EMACLITE
 
 config XILINX_AXI_EMAC
 	tristate "Xilinx 10/100/1000 AXI Ethernet support"
-	depends on MICROBLAZE
-	select PHYLIB
+	depends on MICROBLAZE || X86 || ARM || COMPILE_TEST
+	select PHYLINK
 	---help---
 	  This driver supports the 10/100/1000 Ethernet from Xilinx for the
 	  AXI bus interface used in Xilinx Virtex FPGAs.
diff --git a/drivers/net/ethernet/xilinx/ll_temac.h b/drivers/net/ethernet/xilinx/ll_temac.h
index 1aeda084b8f1..276292bca334 100644
--- a/drivers/net/ethernet/xilinx/ll_temac.h
+++ b/drivers/net/ethernet/xilinx/ll_temac.h
@@ -361,7 +361,7 @@ struct temac_local {
 	/* For synchronization of indirect register access.  Must be
 	 * shared mutex between interfaces in same TEMAC block.
 	 */
-	struct mutex *indirect_mutex;
+	spinlock_t *indirect_lock;
 	u32 options;			/* Current options word */
 	int last_link;
 	unsigned int temac_features;
@@ -388,8 +388,9 @@ struct temac_local {
 /* xilinx_temac.c */
 int temac_indirect_busywait(struct temac_local *lp);
 u32 temac_indirect_in32(struct temac_local *lp, int reg);
+u32 temac_indirect_in32_locked(struct temac_local *lp, int reg);
 void temac_indirect_out32(struct temac_local *lp, int reg, u32 value);
-
+void temac_indirect_out32_locked(struct temac_local *lp, int reg, u32 value);
 
 /* xilinx_temac_mdio.c */
 int temac_mdio_setup(struct temac_local *lp, struct platform_device *pdev);
diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c
index 14870d659f7d..21c1b4322ea7 100644
--- a/drivers/net/ethernet/xilinx/ll_temac_main.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
@@ -22,7 +22,6 @@
  *
  * TODO:
  * - Factor out locallink DMA code into separate driver
- * - Fix multicast assignment.
  * - Fix support for hardware checksumming.
  * - Testing.  Lots and lots of testing.
  *
@@ -53,6 +52,7 @@
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/dma-mapping.h>
+#include <linux/processor.h>
 #include <linux/platform_data/xilinx-ll-temac.h>
 
 #include "ll_temac.h"
@@ -84,51 +84,118 @@ static void _temac_iow_le(struct temac_local *lp, int offset, u32 value)
 	return iowrite32(value, lp->regs + offset);
 }
 
+static bool hard_acs_rdy(struct temac_local *lp)
+{
+	return temac_ior(lp, XTE_RDY0_OFFSET) & XTE_RDY0_HARD_ACS_RDY_MASK;
+}
+
+static bool hard_acs_rdy_or_timeout(struct temac_local *lp, ktime_t timeout)
+{
+	ktime_t cur = ktime_get();
+
+	return hard_acs_rdy(lp) || ktime_after(cur, timeout);
+}
+
+/* Poll for maximum 20 ms.  This is similar to the 2 jiffies @ 100 Hz
+ * that was used before, and should cover MDIO bus speed down to 3200
+ * Hz.
+ */
+#define HARD_ACS_RDY_POLL_NS (20 * NSEC_PER_MSEC)
+
+/**
+ * temac_indirect_busywait - Wait for current indirect register access
+ * to complete.
+ */
 int temac_indirect_busywait(struct temac_local *lp)
 {
-	unsigned long end = jiffies + 2;
+	ktime_t timeout = ktime_add_ns(ktime_get(), HARD_ACS_RDY_POLL_NS);
 
-	while (!(temac_ior(lp, XTE_RDY0_OFFSET) & XTE_RDY0_HARD_ACS_RDY_MASK)) {
-		if (time_before_eq(end, jiffies)) {
-			WARN_ON(1);
-			return -ETIMEDOUT;
-		}
-		usleep_range(500, 1000);
-	}
-	return 0;
+	spin_until_cond(hard_acs_rdy_or_timeout(lp, timeout));
+	if (WARN_ON(!hard_acs_rdy(lp)))
+		return -ETIMEDOUT;
+	else
+		return 0;
 }
 
 /**
- * temac_indirect_in32
- *
- * lp->indirect_mutex must be held when calling this function
+ * temac_indirect_in32 - Indirect register read access.  This function
+ * must be called without lp->indirect_lock being held.
  */
 u32 temac_indirect_in32(struct temac_local *lp, int reg)
 {
-	u32 val;
+	unsigned long flags;
+	int val;
+
+	spin_lock_irqsave(lp->indirect_lock, flags);
+	val = temac_indirect_in32_locked(lp, reg);
+	spin_unlock_irqrestore(lp->indirect_lock, flags);
+	return val;
+}
 
-	if (temac_indirect_busywait(lp))
+/**
+ * temac_indirect_in32_locked - Indirect register read access.  This
+ * function must be called with lp->indirect_lock being held.  Use
+ * this together with spin_lock_irqsave/spin_lock_irqrestore to avoid
+ * repeated lock/unlock and to ensure uninterrupted access to indirect
+ * registers.
+ */
+u32 temac_indirect_in32_locked(struct temac_local *lp, int reg)
+{
+	/* This initial wait should normally not spin, as we always
+	 * try to wait for indirect access to complete before
+	 * releasing the indirect_lock.
+	 */
+	if (WARN_ON(temac_indirect_busywait(lp)))
 		return -ETIMEDOUT;
+	/* Initiate read from indirect register */
 	temac_iow(lp, XTE_CTL0_OFFSET, reg);
-	if (temac_indirect_busywait(lp))
+	/* Wait for indirect register access to complete.  We really
+	 * should not see timeouts, and could even end up causing
+	 * problem for following indirect access, so let's make a bit
+	 * of WARN noise.
+	 */
+	if (WARN_ON(temac_indirect_busywait(lp)))
 		return -ETIMEDOUT;
-	val = temac_ior(lp, XTE_LSW0_OFFSET);
-
-	return val;
+	/* Value is ready now */
+	return temac_ior(lp, XTE_LSW0_OFFSET);
 }
 
 /**
- * temac_indirect_out32
- *
- * lp->indirect_mutex must be held when calling this function
+ * temac_indirect_out32 - Indirect register write access.  This function
+ * must be called without lp->indirect_lock being held.
  */
 void temac_indirect_out32(struct temac_local *lp, int reg, u32 value)
 {
-	if (temac_indirect_busywait(lp))
+	unsigned long flags;
+
+	spin_lock_irqsave(lp->indirect_lock, flags);
+	temac_indirect_out32_locked(lp, reg, value);
+	spin_unlock_irqrestore(lp->indirect_lock, flags);
+}
+
+/**
+ * temac_indirect_out32_locked - Indirect register write access.  This
+ * function must be called with lp->indirect_lock being held.  Use
+ * this together with spin_lock_irqsave/spin_lock_irqrestore to avoid
+ * repeated lock/unlock and to ensure uninterrupted access to indirect
+ * registers.
+ */
+void temac_indirect_out32_locked(struct temac_local *lp, int reg, u32 value)
+{
+	/* As in temac_indirect_in32_locked(), we should normally not
+	 * spin here.  And if it happens, we actually end up silently
+	 * ignoring the write request.  Ouch.
+	 */
+	if (WARN_ON(temac_indirect_busywait(lp)))
 		return;
+	/* Initiate write to indirect register */
 	temac_iow(lp, XTE_LSW0_OFFSET, value);
 	temac_iow(lp, XTE_CTL0_OFFSET, CNTLREG_WRITE_ENABLE_MASK | reg);
-	temac_indirect_busywait(lp);
+	/* As in temac_indirect_in32_locked(), we should not see timeouts
+	 * here.  And if it happens, we continue before the write has
+	 * completed.  Not good.
+	 */
+	WARN_ON(temac_indirect_busywait(lp));
 }
 
 /**
@@ -344,20 +411,21 @@ out:
 static void temac_do_set_mac_address(struct net_device *ndev)
 {
 	struct temac_local *lp = netdev_priv(ndev);
+	unsigned long flags;
 
 	/* set up unicast MAC address filter set its mac address */
-	mutex_lock(lp->indirect_mutex);
-	temac_indirect_out32(lp, XTE_UAW0_OFFSET,
-			     (ndev->dev_addr[0]) |
-			     (ndev->dev_addr[1] << 8) |
-			     (ndev->dev_addr[2] << 16) |
-			     (ndev->dev_addr[3] << 24));
+	spin_lock_irqsave(lp->indirect_lock, flags);
+	temac_indirect_out32_locked(lp, XTE_UAW0_OFFSET,
+				    (ndev->dev_addr[0]) |
+				    (ndev->dev_addr[1] << 8) |
+				    (ndev->dev_addr[2] << 16) |
+				    (ndev->dev_addr[3] << 24));
 	/* There are reserved bits in EUAW1
 	 * so don't affect them Set MAC bits [47:32] in EUAW1 */
-	temac_indirect_out32(lp, XTE_UAW1_OFFSET,
-			     (ndev->dev_addr[4] & 0x000000ff) |
-			     (ndev->dev_addr[5] << 8));
-	mutex_unlock(lp->indirect_mutex);
+	temac_indirect_out32_locked(lp, XTE_UAW1_OFFSET,
+				    (ndev->dev_addr[4] & 0x000000ff) |
+				    (ndev->dev_addr[5] << 8));
+	spin_unlock_irqrestore(lp->indirect_lock, flags);
 }
 
 static int temac_init_mac_address(struct net_device *ndev, const void *address)
@@ -383,49 +451,58 @@ static int temac_set_mac_address(struct net_device *ndev, void *p)
 static void temac_set_multicast_list(struct net_device *ndev)
 {
 	struct temac_local *lp = netdev_priv(ndev);
-	u32 multi_addr_msw, multi_addr_lsw, val;
-	int i;
+	u32 multi_addr_msw, multi_addr_lsw;
+	int i = 0;
+	unsigned long flags;
+	bool promisc_mode_disabled = false;
 
-	mutex_lock(lp->indirect_mutex);
-	if (ndev->flags & (IFF_ALLMULTI | IFF_PROMISC) ||
-	    netdev_mc_count(ndev) > MULTICAST_CAM_TABLE_NUM) {
-		/*
-		 *	We must make the kernel realise we had to move
-		 *	into promisc mode or we start all out war on
-		 *	the cable. If it was a promisc request the
-		 *	flag is already set. If not we assert it.
-		 */
-		ndev->flags |= IFF_PROMISC;
+	if (ndev->flags & (IFF_PROMISC | IFF_ALLMULTI) ||
+	    (netdev_mc_count(ndev) > MULTICAST_CAM_TABLE_NUM)) {
 		temac_indirect_out32(lp, XTE_AFM_OFFSET, XTE_AFM_EPPRM_MASK);
 		dev_info(&ndev->dev, "Promiscuous mode enabled.\n");
-	} else if (!netdev_mc_empty(ndev)) {
+		return;
+	}
+
+	spin_lock_irqsave(lp->indirect_lock, flags);
+
+	if (!netdev_mc_empty(ndev)) {
 		struct netdev_hw_addr *ha;
 
-		i = 0;
 		netdev_for_each_mc_addr(ha, ndev) {
-			if (i >= MULTICAST_CAM_TABLE_NUM)
+			if (WARN_ON(i >= MULTICAST_CAM_TABLE_NUM))
 				break;
 			multi_addr_msw = ((ha->addr[3] << 24) |
 					  (ha->addr[2] << 16) |
 					  (ha->addr[1] << 8) |
 					  (ha->addr[0]));
-			temac_indirect_out32(lp, XTE_MAW0_OFFSET,
-					     multi_addr_msw);
+			temac_indirect_out32_locked(lp, XTE_MAW0_OFFSET,
+						    multi_addr_msw);
 			multi_addr_lsw = ((ha->addr[5] << 8) |
 					  (ha->addr[4]) | (i << 16));
-			temac_indirect_out32(lp, XTE_MAW1_OFFSET,
-					     multi_addr_lsw);
+			temac_indirect_out32_locked(lp, XTE_MAW1_OFFSET,
+						    multi_addr_lsw);
 			i++;
 		}
-	} else {
-		val = temac_indirect_in32(lp, XTE_AFM_OFFSET);
-		temac_indirect_out32(lp, XTE_AFM_OFFSET,
-				     val & ~XTE_AFM_EPPRM_MASK);
-		temac_indirect_out32(lp, XTE_MAW0_OFFSET, 0);
-		temac_indirect_out32(lp, XTE_MAW1_OFFSET, 0);
-		dev_info(&ndev->dev, "Promiscuous mode disabled.\n");
 	}
-	mutex_unlock(lp->indirect_mutex);
+
+	/* Clear all or remaining/unused address table entries */
+	while (i < MULTICAST_CAM_TABLE_NUM) {
+		temac_indirect_out32_locked(lp, XTE_MAW0_OFFSET, 0);
+		temac_indirect_out32_locked(lp, XTE_MAW1_OFFSET, i << 16);
+		i++;
+	}
+
+	/* Enable address filter block if currently disabled */
+	if (temac_indirect_in32_locked(lp, XTE_AFM_OFFSET)
+	    & XTE_AFM_EPPRM_MASK) {
+		temac_indirect_out32_locked(lp, XTE_AFM_OFFSET, 0);
+		promisc_mode_disabled = true;
+	}
+
+	spin_unlock_irqrestore(lp->indirect_lock, flags);
+
+	if (promisc_mode_disabled)
+		dev_info(&ndev->dev, "Promiscuous mode disabled.\n");
 }
 
 static struct temac_option {
@@ -516,17 +593,19 @@ static u32 temac_setoptions(struct net_device *ndev, u32 options)
 	struct temac_local *lp = netdev_priv(ndev);
 	struct temac_option *tp = &temac_options[0];
 	int reg;
+	unsigned long flags;
 
-	mutex_lock(lp->indirect_mutex);
+	spin_lock_irqsave(lp->indirect_lock, flags);
 	while (tp->opt) {
-		reg = temac_indirect_in32(lp, tp->reg) & ~tp->m_or;
-		if (options & tp->opt)
+		reg = temac_indirect_in32_locked(lp, tp->reg) & ~tp->m_or;
+		if (options & tp->opt) {
 			reg |= tp->m_or;
-		temac_indirect_out32(lp, tp->reg, reg);
+			temac_indirect_out32_locked(lp, tp->reg, reg);
+		}
 		tp++;
 	}
+	spin_unlock_irqrestore(lp->indirect_lock, flags);
 	lp->options |= options;
-	mutex_unlock(lp->indirect_mutex);
 
 	return 0;
 }
@@ -537,6 +616,7 @@ static void temac_device_reset(struct net_device *ndev)
 	struct temac_local *lp = netdev_priv(ndev);
 	u32 timeout;
 	u32 val;
+	unsigned long flags;
 
 	/* Perform a software reset */
 
@@ -545,7 +625,6 @@ static void temac_device_reset(struct net_device *ndev)
 
 	dev_dbg(&ndev->dev, "%s()\n", __func__);
 
-	mutex_lock(lp->indirect_mutex);
 	/* Reset the receiver and wait for it to finish reset */
 	temac_indirect_out32(lp, XTE_RXC1_OFFSET, XTE_RXC1_RXRST_MASK);
 	timeout = 1000;
@@ -571,8 +650,11 @@ static void temac_device_reset(struct net_device *ndev)
 	}
 
 	/* Disable the receiver */
-	val = temac_indirect_in32(lp, XTE_RXC1_OFFSET);
-	temac_indirect_out32(lp, XTE_RXC1_OFFSET, val & ~XTE_RXC1_RXEN_MASK);
+	spin_lock_irqsave(lp->indirect_lock, flags);
+	val = temac_indirect_in32_locked(lp, XTE_RXC1_OFFSET);
+	temac_indirect_out32_locked(lp, XTE_RXC1_OFFSET,
+				    val & ~XTE_RXC1_RXEN_MASK);
+	spin_unlock_irqrestore(lp->indirect_lock, flags);
 
 	/* Reset Local Link (DMA) */
 	lp->dma_out(lp, DMA_CONTROL_REG, DMA_CONTROL_RST);
@@ -592,12 +674,12 @@ static void temac_device_reset(struct net_device *ndev)
 				"temac_device_reset descriptor allocation failed\n");
 	}
 
-	temac_indirect_out32(lp, XTE_RXC0_OFFSET, 0);
-	temac_indirect_out32(lp, XTE_RXC1_OFFSET, 0);
-	temac_indirect_out32(lp, XTE_TXC_OFFSET, 0);
-	temac_indirect_out32(lp, XTE_FCC_OFFSET, XTE_FCC_RXFLO_MASK);
-
-	mutex_unlock(lp->indirect_mutex);
+	spin_lock_irqsave(lp->indirect_lock, flags);
+	temac_indirect_out32_locked(lp, XTE_RXC0_OFFSET, 0);
+	temac_indirect_out32_locked(lp, XTE_RXC1_OFFSET, 0);
+	temac_indirect_out32_locked(lp, XTE_TXC_OFFSET, 0);
+	temac_indirect_out32_locked(lp, XTE_FCC_OFFSET, XTE_FCC_RXFLO_MASK);
+	spin_unlock_irqrestore(lp->indirect_lock, flags);
 
 	/* Sync default options with HW
 	 * but leave receiver and transmitter disabled.  */
@@ -621,13 +703,14 @@ static void temac_adjust_link(struct net_device *ndev)
 	struct phy_device *phy = ndev->phydev;
 	u32 mii_speed;
 	int link_state;
+	unsigned long flags;
 
 	/* hash together the state values to decide if something has changed */
 	link_state = phy->speed | (phy->duplex << 1) | phy->link;
 
-	mutex_lock(lp->indirect_mutex);
 	if (lp->last_link != link_state) {
-		mii_speed = temac_indirect_in32(lp, XTE_EMCFG_OFFSET);
+		spin_lock_irqsave(lp->indirect_lock, flags);
+		mii_speed = temac_indirect_in32_locked(lp, XTE_EMCFG_OFFSET);
 		mii_speed &= ~XTE_EMCFG_LINKSPD_MASK;
 
 		switch (phy->speed) {
@@ -637,11 +720,12 @@ static void temac_adjust_link(struct net_device *ndev)
 		}
 
 		/* Write new speed setting out to TEMAC */
-		temac_indirect_out32(lp, XTE_EMCFG_OFFSET, mii_speed);
+		temac_indirect_out32_locked(lp, XTE_EMCFG_OFFSET, mii_speed);
+		spin_unlock_irqrestore(lp->indirect_lock, flags);
+
 		lp->last_link = link_state;
 		phy_print_status(phy);
 	}
-	mutex_unlock(lp->indirect_mutex);
 }
 
 #ifdef CONFIG_64BIT
@@ -1011,6 +1095,7 @@ static const struct net_device_ops temac_netdev_ops = {
 	.ndo_open = temac_open,
 	.ndo_stop = temac_stop,
 	.ndo_start_xmit = temac_start_xmit,
+	.ndo_set_rx_mode = temac_set_multicast_list,
 	.ndo_set_mac_address = temac_set_mac_address,
 	.ndo_validate_addr = eth_validate_addr,
 	.ndo_do_ioctl = temac_ioctl,
@@ -1076,7 +1161,6 @@ static int temac_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, ndev);
 	SET_NETDEV_DEV(ndev, &pdev->dev);
-	ndev->flags &= ~IFF_MULTICAST;  /* clear multicast */
 	ndev->features = NETIF_F_SG;
 	ndev->netdev_ops = &temac_netdev_ops;
 	ndev->ethtool_ops = &temac_ethtool_ops;
@@ -1103,17 +1187,17 @@ static int temac_probe(struct platform_device *pdev)
 
 	/* Setup mutex for synchronization of indirect register access */
 	if (pdata) {
-		if (!pdata->indirect_mutex) {
+		if (!pdata->indirect_lock) {
 			dev_err(&pdev->dev,
-				"indirect_mutex missing in platform_data\n");
+				"indirect_lock missing in platform_data\n");
 			return -EINVAL;
 		}
-		lp->indirect_mutex = pdata->indirect_mutex;
+		lp->indirect_lock = pdata->indirect_lock;
 	} else {
-		lp->indirect_mutex = devm_kmalloc(&pdev->dev,
-						  sizeof(*lp->indirect_mutex),
-						  GFP_KERNEL);
-		mutex_init(lp->indirect_mutex);
+		lp->indirect_lock = devm_kmalloc(&pdev->dev,
+						 sizeof(*lp->indirect_lock),
+						 GFP_KERNEL);
+		spin_lock_init(lp->indirect_lock);
 	}
 
 	/* map device registers */
diff --git a/drivers/net/ethernet/xilinx/ll_temac_mdio.c b/drivers/net/ethernet/xilinx/ll_temac_mdio.c
index a4667326f745..6fd2dea4e60f 100644
--- a/drivers/net/ethernet/xilinx/ll_temac_mdio.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_mdio.c
@@ -25,14 +25,15 @@ static int temac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
 {
 	struct temac_local *lp = bus->priv;
 	u32 rc;
+	unsigned long flags;
 
 	/* Write the PHY address to the MIIM Access Initiator register.
 	 * When the transfer completes, the PHY register value will appear
 	 * in the LSW0 register */
-	mutex_lock(lp->indirect_mutex);
+	spin_lock_irqsave(lp->indirect_lock, flags);
 	temac_iow(lp, XTE_LSW0_OFFSET, (phy_id << 5) | reg);
-	rc = temac_indirect_in32(lp, XTE_MIIMAI_OFFSET);
-	mutex_unlock(lp->indirect_mutex);
+	rc = temac_indirect_in32_locked(lp, XTE_MIIMAI_OFFSET);
+	spin_unlock_irqrestore(lp->indirect_lock, flags);
 
 	dev_dbg(lp->dev, "temac_mdio_read(phy_id=%i, reg=%x) == %x\n",
 		phy_id, reg, rc);
@@ -43,6 +44,7 @@ static int temac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
 static int temac_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
 {
 	struct temac_local *lp = bus->priv;
+	unsigned long flags;
 
 	dev_dbg(lp->dev, "temac_mdio_write(phy_id=%i, reg=%x, val=%x)\n",
 		phy_id, reg, val);
@@ -50,10 +52,10 @@ static int temac_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
 	/* First write the desired value into the write data register
 	 * and then write the address into the access initiator register
 	 */
-	mutex_lock(lp->indirect_mutex);
-	temac_indirect_out32(lp, XTE_MGTDR_OFFSET, val);
-	temac_indirect_out32(lp, XTE_MIIMAI_OFFSET, (phy_id << 5) | reg);
-	mutex_unlock(lp->indirect_mutex);
+	spin_lock_irqsave(lp->indirect_lock, flags);
+	temac_indirect_out32_locked(lp, XTE_MGTDR_OFFSET, val);
+	temac_indirect_out32_locked(lp, XTE_MIIMAI_OFFSET, (phy_id << 5) | reg);
+	spin_unlock_irqrestore(lp->indirect_lock, flags);
 
 	return 0;
 }
@@ -87,9 +89,7 @@ int temac_mdio_setup(struct temac_local *lp, struct platform_device *pdev)
 
 	/* Enable the MDIO bus by asserting the enable bit and writing
 	 * in the clock config */
-	mutex_lock(lp->indirect_mutex);
 	temac_indirect_out32(lp, XTE_MC_OFFSET, 1 << 6 | clk_div);
-	mutex_unlock(lp->indirect_mutex);
 
 	bus = devm_mdiobus_alloc(&pdev->dev);
 	if (!bus)
@@ -116,10 +116,8 @@ int temac_mdio_setup(struct temac_local *lp, struct platform_device *pdev)
 	if (rc)
 		return rc;
 
-	mutex_lock(lp->indirect_mutex);
 	dev_dbg(lp->dev, "MDIO bus registered;  MC:%x\n",
 		temac_indirect_in32(lp, XTE_MC_OFFSET));
-	mutex_unlock(lp->indirect_mutex);
 	return 0;
 }
 
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h
index 011adae32b89..2dacfc85b3ba 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet.h
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h
@@ -13,6 +13,7 @@
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/if_vlan.h>
+#include <linux/phylink.h>
 
 /* Packet size info */
 #define XAE_HDR_SIZE			14 /* Size of Ethernet header */
@@ -83,6 +84,8 @@
 #define XAXIDMA_CR_RUNSTOP_MASK	0x00000001 /* Start/stop DMA channel */
 #define XAXIDMA_CR_RESET_MASK	0x00000004 /* Reset DMA engine */
 
+#define XAXIDMA_SR_HALT_MASK	0x00000001 /* Indicates DMA channel halted */
+
 #define XAXIDMA_BD_NDESC_OFFSET		0x00 /* Next descriptor pointer */
 #define XAXIDMA_BD_BUFA_OFFSET		0x08 /* Buffer address */
 #define XAXIDMA_BD_CTRL_LEN_OFFSET	0x18 /* Control/buffer length */
@@ -356,9 +359,6 @@
  * @app2:         MM2S/S2MM User Application Field 2.
  * @app3:         MM2S/S2MM User Application Field 3.
  * @app4:         MM2S/S2MM User Application Field 4.
- * @sw_id_offset: MM2S/S2MM Sw ID
- * @reserved5:    Reserved and not used
- * @reserved6:    Reserved and not used
  */
 struct axidma_bd {
 	u32 next;	/* Physical address of next buffer descriptor */
@@ -373,11 +373,9 @@ struct axidma_bd {
 	u32 app1;	/* TX start << 16 | insert */
 	u32 app2;	/* TX csum seed */
 	u32 app3;
-	u32 app4;
-	u32 sw_id_offset;
-	u32 reserved5;
-	u32 reserved6;
-};
+	u32 app4;   /* Last field used by HW */
+	struct sk_buff *skb;
+} __aligned(XAXIDMA_BD_MINIMUM_ALIGNMENT);
 
 /**
  * struct axienet_local - axienet private per device data
@@ -385,6 +383,7 @@ struct axidma_bd {
  * @dev:	Pointer to device structure
  * @phy_node:	Pointer to device node structure
  * @mii_bus:	Pointer to MII bus structure
+ * @regs_start: Resource start for axienet device addresses
  * @regs:	Base address for the axienet_local device address space
  * @dma_regs:	Base address for the axidma device address space
  * @dma_err_tasklet: Tasklet structure to process Axi DMA errors
@@ -422,10 +421,17 @@ struct axienet_local {
 	/* Connection to PHY device */
 	struct device_node *phy_node;
 
+	struct phylink *phylink;
+	struct phylink_config phylink_config;
+
+	/* Clock for AXI bus */
+	struct clk *clk;
+
 	/* MDIO bus data */
 	struct mii_bus *mii_bus;	/* MII bus reference */
 
 	/* IO registers, dma functions and IRQs */
+	resource_size_t regs_start;
 	void __iomem *regs;
 	void __iomem *dma_regs;
 
@@ -433,17 +439,19 @@ struct axienet_local {
 
 	int tx_irq;
 	int rx_irq;
+	int eth_irq;
 	phy_interface_t phy_mode;
 
 	u32 options;			/* Current options word */
-	u32 last_link;
 	u32 features;
 
 	/* Buffer descriptors */
 	struct axidma_bd *tx_bd_v;
 	dma_addr_t tx_bd_p;
+	u32 tx_bd_num;
 	struct axidma_bd *rx_bd_v;
 	dma_addr_t rx_bd_p;
+	u32 rx_bd_num;
 	u32 tx_bd_ci;
 	u32 tx_bd_tail;
 	u32 rx_bd_ci;
@@ -481,7 +489,7 @@ struct axienet_option {
  */
 static inline u32 axienet_ior(struct axienet_local *lp, off_t offset)
 {
-	return in_be32(lp->regs + offset);
+	return ioread32(lp->regs + offset);
 }
 
 static inline u32 axinet_ior_read_mcr(struct axienet_local *lp)
@@ -501,12 +509,13 @@ static inline u32 axinet_ior_read_mcr(struct axienet_local *lp)
 static inline void axienet_iow(struct axienet_local *lp, off_t offset,
 			       u32 value)
 {
-	out_be32((lp->regs + offset), value);
+	iowrite32(value, lp->regs + offset);
 }
 
 /* Function prototypes visible in xilinx_axienet_mdio.c for other files */
-int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np);
-int axienet_mdio_wait_until_ready(struct axienet_local *lp);
+int axienet_mdio_enable(struct axienet_local *lp);
+void axienet_mdio_disable(struct axienet_local *lp);
+int axienet_mdio_setup(struct axienet_local *lp);
 void axienet_mdio_teardown(struct axienet_local *lp);
 
 #endif /* XILINX_AXI_ENET_H */
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 831967f6eff8..4fc627fb4d11 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -7,6 +7,7 @@
  * Copyright (c) 2008-2009 Secret Lab Technologies Ltd.
  * Copyright (c) 2010 - 2011 Michal Simek <monstr@monstr.eu>
  * Copyright (c) 2010 - 2011 PetaLogix
+ * Copyright (c) 2019 SED Systems, a division of Calian Ltd.
  * Copyright (c) 2010 - 2012 Xilinx, Inc. All rights reserved.
  *
  * This is a driver for the Xilinx Axi Ethernet which is used in the Virtex6
@@ -21,6 +22,7 @@
  *  - Add support for extended VLAN support.
  */
 
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/etherdevice.h>
 #include <linux/module.h>
@@ -38,16 +40,18 @@
 
 #include "xilinx_axienet.h"
 
-/* Descriptors defines for Tx and Rx DMA - 2^n for the best performance */
-#define TX_BD_NUM		64
-#define RX_BD_NUM		128
+/* Descriptors defines for Tx and Rx DMA */
+#define TX_BD_NUM_DEFAULT		64
+#define RX_BD_NUM_DEFAULT		1024
+#define TX_BD_NUM_MAX			4096
+#define RX_BD_NUM_MAX			4096
 
 /* Must be shorter than length of ethtool_drvinfo.driver field to fit */
 #define DRIVER_NAME		"xaxienet"
 #define DRIVER_DESCRIPTION	"Xilinx Axi Ethernet driver"
 #define DRIVER_VERSION		"1.00a"
 
-#define AXIENET_REGS_N		32
+#define AXIENET_REGS_N		40
 
 /* Match table for of_platform binding */
 static const struct of_device_id axienet_of_match[] = {
@@ -125,7 +129,7 @@ static struct axienet_option axienet_options[] = {
  */
 static inline u32 axienet_dma_in32(struct axienet_local *lp, off_t reg)
 {
-	return in_be32(lp->dma_regs + reg);
+	return ioread32(lp->dma_regs + reg);
 }
 
 /**
@@ -140,7 +144,7 @@ static inline u32 axienet_dma_in32(struct axienet_local *lp, off_t reg)
 static inline void axienet_dma_out32(struct axienet_local *lp,
 				     off_t reg, u32 value)
 {
-	out_be32((lp->dma_regs + reg), value);
+	iowrite32(value, lp->dma_regs + reg);
 }
 
 /**
@@ -156,22 +160,21 @@ static void axienet_dma_bd_release(struct net_device *ndev)
 	int i;
 	struct axienet_local *lp = netdev_priv(ndev);
 
-	for (i = 0; i < RX_BD_NUM; i++) {
+	for (i = 0; i < lp->rx_bd_num; i++) {
 		dma_unmap_single(ndev->dev.parent, lp->rx_bd_v[i].phys,
 				 lp->max_frm_size, DMA_FROM_DEVICE);
-		dev_kfree_skb((struct sk_buff *)
-			      (lp->rx_bd_v[i].sw_id_offset));
+		dev_kfree_skb(lp->rx_bd_v[i].skb);
 	}
 
 	if (lp->rx_bd_v) {
 		dma_free_coherent(ndev->dev.parent,
-				  sizeof(*lp->rx_bd_v) * RX_BD_NUM,
+				  sizeof(*lp->rx_bd_v) * lp->rx_bd_num,
 				  lp->rx_bd_v,
 				  lp->rx_bd_p);
 	}
 	if (lp->tx_bd_v) {
 		dma_free_coherent(ndev->dev.parent,
-				  sizeof(*lp->tx_bd_v) * TX_BD_NUM,
+				  sizeof(*lp->tx_bd_v) * lp->tx_bd_num,
 				  lp->tx_bd_v,
 				  lp->tx_bd_p);
 	}
@@ -201,33 +204,33 @@ static int axienet_dma_bd_init(struct net_device *ndev)
 
 	/* Allocate the Tx and Rx buffer descriptors. */
 	lp->tx_bd_v = dma_alloc_coherent(ndev->dev.parent,
-					 sizeof(*lp->tx_bd_v) * TX_BD_NUM,
+					 sizeof(*lp->tx_bd_v) * lp->tx_bd_num,
 					 &lp->tx_bd_p, GFP_KERNEL);
 	if (!lp->tx_bd_v)
 		goto out;
 
 	lp->rx_bd_v = dma_alloc_coherent(ndev->dev.parent,
-					 sizeof(*lp->rx_bd_v) * RX_BD_NUM,
+					 sizeof(*lp->rx_bd_v) * lp->rx_bd_num,
 					 &lp->rx_bd_p, GFP_KERNEL);
 	if (!lp->rx_bd_v)
 		goto out;
 
-	for (i = 0; i < TX_BD_NUM; i++) {
+	for (i = 0; i < lp->tx_bd_num; i++) {
 		lp->tx_bd_v[i].next = lp->tx_bd_p +
 				      sizeof(*lp->tx_bd_v) *
-				      ((i + 1) % TX_BD_NUM);
+				      ((i + 1) % lp->tx_bd_num);
 	}
 
-	for (i = 0; i < RX_BD_NUM; i++) {
+	for (i = 0; i < lp->rx_bd_num; i++) {
 		lp->rx_bd_v[i].next = lp->rx_bd_p +
 				      sizeof(*lp->rx_bd_v) *
-				      ((i + 1) % RX_BD_NUM);
+				      ((i + 1) % lp->rx_bd_num);
 
 		skb = netdev_alloc_skb_ip_align(ndev, lp->max_frm_size);
 		if (!skb)
 			goto out;
 
-		lp->rx_bd_v[i].sw_id_offset = (u32) skb;
+		lp->rx_bd_v[i].skb = skb;
 		lp->rx_bd_v[i].phys = dma_map_single(ndev->dev.parent,
 						     skb->data,
 						     lp->max_frm_size,
@@ -269,7 +272,7 @@ static int axienet_dma_bd_init(struct net_device *ndev)
 	axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET,
 			  cr | XAXIDMA_CR_RUNSTOP_MASK);
 	axienet_dma_out32(lp, XAXIDMA_RX_TDESC_OFFSET, lp->rx_bd_p +
-			  (sizeof(*lp->rx_bd_v) * (RX_BD_NUM - 1)));
+			  (sizeof(*lp->rx_bd_v) * (lp->rx_bd_num - 1)));
 
 	/* Write to the RS (Run-stop) bit in the Tx channel control register.
 	 * Tx channel is now ready to run. But only after we write to the
@@ -434,17 +437,20 @@ static void axienet_setoptions(struct net_device *ndev, u32 options)
 	lp->options |= options;
 }
 
-static void __axienet_device_reset(struct axienet_local *lp, off_t offset)
+static void __axienet_device_reset(struct axienet_local *lp)
 {
 	u32 timeout;
 	/* Reset Axi DMA. This would reset Axi Ethernet core as well. The reset
 	 * process of Axi DMA takes a while to complete as all pending
 	 * commands/transfers will be flushed or completed during this
 	 * reset process.
+	 * Note that even though both TX and RX have their own reset register,
+	 * they both reset the entire DMA core, so only one needs to be used.
 	 */
-	axienet_dma_out32(lp, offset, XAXIDMA_CR_RESET_MASK);
+	axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, XAXIDMA_CR_RESET_MASK);
 	timeout = DELAY_OF_ONE_MILLISEC;
-	while (axienet_dma_in32(lp, offset) & XAXIDMA_CR_RESET_MASK) {
+	while (axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET) &
+				XAXIDMA_CR_RESET_MASK) {
 		udelay(1);
 		if (--timeout == 0) {
 			netdev_err(lp->ndev, "%s: DMA reset timeout!\n",
@@ -470,8 +476,7 @@ static void axienet_device_reset(struct net_device *ndev)
 	u32 axienet_status;
 	struct axienet_local *lp = netdev_priv(ndev);
 
-	__axienet_device_reset(lp, XAXIDMA_TX_CR_OFFSET);
-	__axienet_device_reset(lp, XAXIDMA_RX_CR_OFFSET);
+	__axienet_device_reset(lp);
 
 	lp->max_frm_size = XAE_MAX_VLAN_FRAME_SIZE;
 	lp->options |= XAE_OPTION_VLAN;
@@ -498,6 +503,8 @@ static void axienet_device_reset(struct net_device *ndev)
 	axienet_status = axienet_ior(lp, XAE_IP_OFFSET);
 	if (axienet_status & XAE_INT_RXRJECT_MASK)
 		axienet_iow(lp, XAE_IS_OFFSET, XAE_INT_RXRJECT_MASK);
+	axienet_iow(lp, XAE_IE_OFFSET, lp->eth_irq > 0 ?
+		    XAE_INT_RECV_ERROR_MASK : 0);
 
 	axienet_iow(lp, XAE_FCC_OFFSET, XAE_FCC_FCRX_MASK);
 
@@ -514,63 +521,6 @@ static void axienet_device_reset(struct net_device *ndev)
 }
 
 /**
- * axienet_adjust_link - Adjust the PHY link speed/duplex.
- * @ndev:	Pointer to the net_device structure
- *
- * This function is called to change the speed and duplex setting after
- * auto negotiation is done by the PHY. This is the function that gets
- * registered with the PHY interface through the "of_phy_connect" call.
- */
-static void axienet_adjust_link(struct net_device *ndev)
-{
-	u32 emmc_reg;
-	u32 link_state;
-	u32 setspeed = 1;
-	struct axienet_local *lp = netdev_priv(ndev);
-	struct phy_device *phy = ndev->phydev;
-
-	link_state = phy->speed | (phy->duplex << 1) | phy->link;
-	if (lp->last_link != link_state) {
-		if ((phy->speed == SPEED_10) || (phy->speed == SPEED_100)) {
-			if (lp->phy_mode == PHY_INTERFACE_MODE_1000BASEX)
-				setspeed = 0;
-		} else {
-			if ((phy->speed == SPEED_1000) &&
-			    (lp->phy_mode == PHY_INTERFACE_MODE_MII))
-				setspeed = 0;
-		}
-
-		if (setspeed == 1) {
-			emmc_reg = axienet_ior(lp, XAE_EMMC_OFFSET);
-			emmc_reg &= ~XAE_EMMC_LINKSPEED_MASK;
-
-			switch (phy->speed) {
-			case SPEED_1000:
-				emmc_reg |= XAE_EMMC_LINKSPD_1000;
-				break;
-			case SPEED_100:
-				emmc_reg |= XAE_EMMC_LINKSPD_100;
-				break;
-			case SPEED_10:
-				emmc_reg |= XAE_EMMC_LINKSPD_10;
-				break;
-			default:
-				dev_err(&ndev->dev, "Speed other than 10, 100 "
-					"or 1Gbps is not supported\n");
-				break;
-			}
-
-			axienet_iow(lp, XAE_EMMC_OFFSET, emmc_reg);
-			lp->last_link = link_state;
-			phy_print_status(phy);
-		} else {
-			netdev_err(ndev,
-				   "Error setting Axi Ethernet mac speed\n");
-		}
-	}
-}
-
-/**
  * axienet_start_xmit_done - Invoked once a transmit is completed by the
  * Axi DMA Tx channel.
  * @ndev:	Pointer to the net_device structure
@@ -595,26 +545,31 @@ static void axienet_start_xmit_done(struct net_device *ndev)
 		dma_unmap_single(ndev->dev.parent, cur_p->phys,
 				(cur_p->cntrl & XAXIDMA_BD_CTRL_LENGTH_MASK),
 				DMA_TO_DEVICE);
-		if (cur_p->app4)
-			dev_consume_skb_irq((struct sk_buff *)cur_p->app4);
+		if (cur_p->skb)
+			dev_consume_skb_irq(cur_p->skb);
 		/*cur_p->phys = 0;*/
 		cur_p->app0 = 0;
 		cur_p->app1 = 0;
 		cur_p->app2 = 0;
 		cur_p->app4 = 0;
 		cur_p->status = 0;
+		cur_p->skb = NULL;
 
 		size += status & XAXIDMA_BD_STS_ACTUAL_LEN_MASK;
 		packets++;
 
-		++lp->tx_bd_ci;
-		lp->tx_bd_ci %= TX_BD_NUM;
+		if (++lp->tx_bd_ci >= lp->tx_bd_num)
+			lp->tx_bd_ci = 0;
 		cur_p = &lp->tx_bd_v[lp->tx_bd_ci];
 		status = cur_p->status;
 	}
 
 	ndev->stats.tx_packets += packets;
 	ndev->stats.tx_bytes += size;
+
+	/* Matches barrier in axienet_start_xmit */
+	smp_mb();
+
 	netif_wake_queue(ndev);
 }
 
@@ -635,7 +590,7 @@ static inline int axienet_check_tx_bd_space(struct axienet_local *lp,
 					    int num_frag)
 {
 	struct axidma_bd *cur_p;
-	cur_p = &lp->tx_bd_v[(lp->tx_bd_tail + num_frag) % TX_BD_NUM];
+	cur_p = &lp->tx_bd_v[(lp->tx_bd_tail + num_frag) % lp->tx_bd_num];
 	if (cur_p->status & XAXIDMA_BD_STS_ALL_MASK)
 		return NETDEV_TX_BUSY;
 	return 0;
@@ -670,9 +625,19 @@ axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
 
 	if (axienet_check_tx_bd_space(lp, num_frag)) {
-		if (!netif_queue_stopped(ndev))
-			netif_stop_queue(ndev);
-		return NETDEV_TX_BUSY;
+		if (netif_queue_stopped(ndev))
+			return NETDEV_TX_BUSY;
+
+		netif_stop_queue(ndev);
+
+		/* Matches barrier in axienet_start_xmit_done */
+		smp_mb();
+
+		/* Space might have just been freed - check again */
+		if (axienet_check_tx_bd_space(lp, num_frag))
+			return NETDEV_TX_BUSY;
+
+		netif_wake_queue(ndev);
 	}
 
 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
@@ -695,8 +660,8 @@ axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 				     skb_headlen(skb), DMA_TO_DEVICE);
 
 	for (ii = 0; ii < num_frag; ii++) {
-		++lp->tx_bd_tail;
-		lp->tx_bd_tail %= TX_BD_NUM;
+		if (++lp->tx_bd_tail >= lp->tx_bd_num)
+			lp->tx_bd_tail = 0;
 		cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
 		frag = &skb_shinfo(skb)->frags[ii];
 		cur_p->phys = dma_map_single(ndev->dev.parent,
@@ -707,13 +672,13 @@ axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	}
 
 	cur_p->cntrl |= XAXIDMA_BD_CTRL_TXEOF_MASK;
-	cur_p->app4 = (unsigned long)skb;
+	cur_p->skb = skb;
 
 	tail_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail;
 	/* Start the transfer */
 	axienet_dma_out32(lp, XAXIDMA_TX_TDESC_OFFSET, tail_p);
-	++lp->tx_bd_tail;
-	lp->tx_bd_tail %= TX_BD_NUM;
+	if (++lp->tx_bd_tail >= lp->tx_bd_num)
+		lp->tx_bd_tail = 0;
 
 	return NETDEV_TX_OK;
 }
@@ -742,13 +707,15 @@ static void axienet_recv(struct net_device *ndev)
 
 	while ((cur_p->status & XAXIDMA_BD_STS_COMPLETE_MASK)) {
 		tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci;
-		skb = (struct sk_buff *) (cur_p->sw_id_offset);
-		length = cur_p->app4 & 0x0000FFFF;
 
 		dma_unmap_single(ndev->dev.parent, cur_p->phys,
 				 lp->max_frm_size,
 				 DMA_FROM_DEVICE);
 
+		skb = cur_p->skb;
+		cur_p->skb = NULL;
+		length = cur_p->app4 & 0x0000FFFF;
+
 		skb_put(skb, length);
 		skb->protocol = eth_type_trans(skb, ndev);
 		/*skb_checksum_none_assert(skb);*/
@@ -783,10 +750,10 @@ static void axienet_recv(struct net_device *ndev)
 					     DMA_FROM_DEVICE);
 		cur_p->cntrl = lp->max_frm_size;
 		cur_p->status = 0;
-		cur_p->sw_id_offset = (u32) new_skb;
+		cur_p->skb = new_skb;
 
-		++lp->rx_bd_ci;
-		lp->rx_bd_ci %= RX_BD_NUM;
+		if (++lp->rx_bd_ci >= lp->rx_bd_num)
+			lp->rx_bd_ci = 0;
 		cur_p = &lp->rx_bd_v[lp->rx_bd_ci];
 	}
 
@@ -802,7 +769,7 @@ static void axienet_recv(struct net_device *ndev)
  * @irq:	irq number
  * @_ndev:	net_device pointer
  *
- * Return: IRQ_HANDLED for all cases.
+ * Return: IRQ_HANDLED if device generated a TX interrupt, IRQ_NONE otherwise.
  *
  * This is the Axi DMA Tx done Isr. It invokes "axienet_start_xmit_done"
  * to complete the BD processing.
@@ -821,7 +788,7 @@ static irqreturn_t axienet_tx_irq(int irq, void *_ndev)
 		goto out;
 	}
 	if (!(status & XAXIDMA_IRQ_ALL_MASK))
-		dev_err(&ndev->dev, "No interrupts asserted in Tx path\n");
+		return IRQ_NONE;
 	if (status & XAXIDMA_IRQ_ERROR_MASK) {
 		dev_err(&ndev->dev, "DMA Tx error 0x%x\n", status);
 		dev_err(&ndev->dev, "Current BD is at: 0x%x\n",
@@ -851,7 +818,7 @@ out:
  * @irq:	irq number
  * @_ndev:	net_device pointer
  *
- * Return: IRQ_HANDLED for all cases.
+ * Return: IRQ_HANDLED if device generated a RX interrupt, IRQ_NONE otherwise.
  *
  * This is the Axi DMA Rx Isr. It invokes "axienet_recv" to complete the BD
  * processing.
@@ -870,7 +837,7 @@ static irqreturn_t axienet_rx_irq(int irq, void *_ndev)
 		goto out;
 	}
 	if (!(status & XAXIDMA_IRQ_ALL_MASK))
-		dev_err(&ndev->dev, "No interrupts asserted in Rx path\n");
+		return IRQ_NONE;
 	if (status & XAXIDMA_IRQ_ERROR_MASK) {
 		dev_err(&ndev->dev, "DMA Rx error 0x%x\n", status);
 		dev_err(&ndev->dev, "Current BD is at: 0x%x\n",
@@ -895,6 +862,35 @@ out:
 	return IRQ_HANDLED;
 }
 
+/**
+ * axienet_eth_irq - Ethernet core Isr.
+ * @irq:	irq number
+ * @_ndev:	net_device pointer
+ *
+ * Return: IRQ_HANDLED if device generated a core interrupt, IRQ_NONE otherwise.
+ *
+ * Handle miscellaneous conditions indicated by Ethernet core IRQ.
+ */
+static irqreturn_t axienet_eth_irq(int irq, void *_ndev)
+{
+	struct net_device *ndev = _ndev;
+	struct axienet_local *lp = netdev_priv(ndev);
+	unsigned int pending;
+
+	pending = axienet_ior(lp, XAE_IP_OFFSET);
+	if (!pending)
+		return IRQ_NONE;
+
+	if (pending & XAE_INT_RXFIFOOVR_MASK)
+		ndev->stats.rx_missed_errors++;
+
+	if (pending & XAE_INT_RXRJECT_MASK)
+		ndev->stats.rx_frame_errors++;
+
+	axienet_iow(lp, XAE_IS_OFFSET, pending);
+	return IRQ_HANDLED;
+}
+
 static void axienet_dma_err_handler(unsigned long data);
 
 /**
@@ -904,67 +900,72 @@ static void axienet_dma_err_handler(unsigned long data);
  * Return: 0, on success.
  *	    non-zero error value on failure
  *
- * This is the driver open routine. It calls phy_start to start the PHY device.
+ * This is the driver open routine. It calls phylink_start to start the
+ * PHY device.
  * It also allocates interrupt service routines, enables the interrupt lines
  * and ISR handling. Axi Ethernet core is reset through Axi DMA core. Buffer
  * descriptors are initialized.
  */
 static int axienet_open(struct net_device *ndev)
 {
-	int ret, mdio_mcreg;
+	int ret;
 	struct axienet_local *lp = netdev_priv(ndev);
-	struct phy_device *phydev = NULL;
 
 	dev_dbg(&ndev->dev, "axienet_open()\n");
 
-	mdio_mcreg = axienet_ior(lp, XAE_MDIO_MC_OFFSET);
-	ret = axienet_mdio_wait_until_ready(lp);
-	if (ret < 0)
-		return ret;
 	/* Disable the MDIO interface till Axi Ethernet Reset is completed.
 	 * When we do an Axi Ethernet reset, it resets the complete core
-	 * including the MDIO. If MDIO is not disabled when the reset
-	 * process is started, MDIO will be broken afterwards.
+	 * including the MDIO. MDIO must be disabled before resetting
+	 * and re-enabled afterwards.
+	 * Hold MDIO bus lock to avoid MDIO accesses during the reset.
 	 */
-	axienet_iow(lp, XAE_MDIO_MC_OFFSET,
-		    (mdio_mcreg & (~XAE_MDIO_MC_MDIOEN_MASK)));
+	mutex_lock(&lp->mii_bus->mdio_lock);
+	axienet_mdio_disable(lp);
 	axienet_device_reset(ndev);
-	/* Enable the MDIO */
-	axienet_iow(lp, XAE_MDIO_MC_OFFSET, mdio_mcreg);
-	ret = axienet_mdio_wait_until_ready(lp);
+	ret = axienet_mdio_enable(lp);
+	mutex_unlock(&lp->mii_bus->mdio_lock);
 	if (ret < 0)
 		return ret;
 
-	if (lp->phy_node) {
-		phydev = of_phy_connect(lp->ndev, lp->phy_node,
-					axienet_adjust_link, 0, lp->phy_mode);
-
-		if (!phydev)
-			dev_err(lp->dev, "of_phy_connect() failed\n");
-		else
-			phy_start(phydev);
+	ret = phylink_of_phy_connect(lp->phylink, lp->dev->of_node, 0);
+	if (ret) {
+		dev_err(lp->dev, "phylink_of_phy_connect() failed: %d\n", ret);
+		return ret;
 	}
 
+	phylink_start(lp->phylink);
+
 	/* Enable tasklets for Axi DMA error handling */
 	tasklet_init(&lp->dma_err_tasklet, axienet_dma_err_handler,
 		     (unsigned long) lp);
 
 	/* Enable interrupts for Axi DMA Tx */
-	ret = request_irq(lp->tx_irq, axienet_tx_irq, 0, ndev->name, ndev);
+	ret = request_irq(lp->tx_irq, axienet_tx_irq, IRQF_SHARED,
+			  ndev->name, ndev);
 	if (ret)
 		goto err_tx_irq;
 	/* Enable interrupts for Axi DMA Rx */
-	ret = request_irq(lp->rx_irq, axienet_rx_irq, 0, ndev->name, ndev);
+	ret = request_irq(lp->rx_irq, axienet_rx_irq, IRQF_SHARED,
+			  ndev->name, ndev);
 	if (ret)
 		goto err_rx_irq;
+	/* Enable interrupts for Axi Ethernet core (if defined) */
+	if (lp->eth_irq > 0) {
+		ret = request_irq(lp->eth_irq, axienet_eth_irq, IRQF_SHARED,
+				  ndev->name, ndev);
+		if (ret)
+			goto err_eth_irq;
+	}
 
 	return 0;
 
+err_eth_irq:
+	free_irq(lp->rx_irq, ndev);
 err_rx_irq:
 	free_irq(lp->tx_irq, ndev);
 err_tx_irq:
-	if (phydev)
-		phy_disconnect(phydev);
+	phylink_stop(lp->phylink);
+	phylink_disconnect_phy(lp->phylink);
 	tasklet_kill(&lp->dma_err_tasklet);
 	dev_err(lp->dev, "request_irq() failed\n");
 	return ret;
@@ -976,34 +977,61 @@ err_tx_irq:
  *
  * Return: 0, on success.
  *
- * This is the driver stop routine. It calls phy_disconnect to stop the PHY
+ * This is the driver stop routine. It calls phylink_disconnect to stop the PHY
  * device. It also removes the interrupt handlers and disables the interrupts.
  * The Axi DMA Tx/Rx BDs are released.
  */
 static int axienet_stop(struct net_device *ndev)
 {
-	u32 cr;
+	u32 cr, sr;
+	int count;
 	struct axienet_local *lp = netdev_priv(ndev);
 
 	dev_dbg(&ndev->dev, "axienet_close()\n");
 
-	cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET);
-	axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET,
-			  cr & (~XAXIDMA_CR_RUNSTOP_MASK));
-	cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET);
-	axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET,
-			  cr & (~XAXIDMA_CR_RUNSTOP_MASK));
+	phylink_stop(lp->phylink);
+	phylink_disconnect_phy(lp->phylink);
+
 	axienet_setoptions(ndev, lp->options &
 			   ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN));
 
+	cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET);
+	cr &= ~(XAXIDMA_CR_RUNSTOP_MASK | XAXIDMA_IRQ_ALL_MASK);
+	axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr);
+
+	cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET);
+	cr &= ~(XAXIDMA_CR_RUNSTOP_MASK | XAXIDMA_IRQ_ALL_MASK);
+	axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr);
+
+	axienet_iow(lp, XAE_IE_OFFSET, 0);
+
+	/* Give DMAs a chance to halt gracefully */
+	sr = axienet_dma_in32(lp, XAXIDMA_RX_SR_OFFSET);
+	for (count = 0; !(sr & XAXIDMA_SR_HALT_MASK) && count < 5; ++count) {
+		msleep(20);
+		sr = axienet_dma_in32(lp, XAXIDMA_RX_SR_OFFSET);
+	}
+
+	sr = axienet_dma_in32(lp, XAXIDMA_TX_SR_OFFSET);
+	for (count = 0; !(sr & XAXIDMA_SR_HALT_MASK) && count < 5; ++count) {
+		msleep(20);
+		sr = axienet_dma_in32(lp, XAXIDMA_TX_SR_OFFSET);
+	}
+
+	/* Do a reset to ensure DMA is really stopped */
+	mutex_lock(&lp->mii_bus->mdio_lock);
+	axienet_mdio_disable(lp);
+	__axienet_device_reset(lp);
+	axienet_mdio_enable(lp);
+	mutex_unlock(&lp->mii_bus->mdio_lock);
+
 	tasklet_kill(&lp->dma_err_tasklet);
 
+	if (lp->eth_irq > 0)
+		free_irq(lp->eth_irq, ndev);
 	free_irq(lp->tx_irq, ndev);
 	free_irq(lp->rx_irq, ndev);
 
-	if (ndev->phydev)
-		phy_disconnect(ndev->phydev);
-
 	axienet_dma_bd_release(ndev);
 	return 0;
 }
@@ -1151,6 +1179,48 @@ static void axienet_ethtools_get_regs(struct net_device *ndev,
 	data[29] = axienet_ior(lp, XAE_FMI_OFFSET);
 	data[30] = axienet_ior(lp, XAE_AF0_OFFSET);
 	data[31] = axienet_ior(lp, XAE_AF1_OFFSET);
+	data[32] = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET);
+	data[33] = axienet_dma_in32(lp, XAXIDMA_TX_SR_OFFSET);
+	data[34] = axienet_dma_in32(lp, XAXIDMA_TX_CDESC_OFFSET);
+	data[35] = axienet_dma_in32(lp, XAXIDMA_TX_TDESC_OFFSET);
+	data[36] = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET);
+	data[37] = axienet_dma_in32(lp, XAXIDMA_RX_SR_OFFSET);
+	data[38] = axienet_dma_in32(lp, XAXIDMA_RX_CDESC_OFFSET);
+	data[39] = axienet_dma_in32(lp, XAXIDMA_RX_TDESC_OFFSET);
+}
+
+static void axienet_ethtools_get_ringparam(struct net_device *ndev,
+					   struct ethtool_ringparam *ering)
+{
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	ering->rx_max_pending = RX_BD_NUM_MAX;
+	ering->rx_mini_max_pending = 0;
+	ering->rx_jumbo_max_pending = 0;
+	ering->tx_max_pending = TX_BD_NUM_MAX;
+	ering->rx_pending = lp->rx_bd_num;
+	ering->rx_mini_pending = 0;
+	ering->rx_jumbo_pending = 0;
+	ering->tx_pending = lp->tx_bd_num;
+}
+
+static int axienet_ethtools_set_ringparam(struct net_device *ndev,
+					  struct ethtool_ringparam *ering)
+{
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	if (ering->rx_pending > RX_BD_NUM_MAX ||
+	    ering->rx_mini_pending ||
+	    ering->rx_jumbo_pending ||
+	    ering->rx_pending > TX_BD_NUM_MAX)
+		return -EINVAL;
+
+	if (netif_running(ndev))
+		return -EBUSY;
+
+	lp->rx_bd_num = ering->rx_pending;
+	lp->tx_bd_num = ering->tx_pending;
+	return 0;
 }
 
 /**
@@ -1166,12 +1236,9 @@ static void
 axienet_ethtools_get_pauseparam(struct net_device *ndev,
 				struct ethtool_pauseparam *epauseparm)
 {
-	u32 regval;
 	struct axienet_local *lp = netdev_priv(ndev);
-	epauseparm->autoneg  = 0;
-	regval = axienet_ior(lp, XAE_FCC_OFFSET);
-	epauseparm->tx_pause = regval & XAE_FCC_FCTX_MASK;
-	epauseparm->rx_pause = regval & XAE_FCC_FCRX_MASK;
+
+	phylink_ethtool_get_pauseparam(lp->phylink, epauseparm);
 }
 
 /**
@@ -1190,27 +1257,9 @@ static int
 axienet_ethtools_set_pauseparam(struct net_device *ndev,
 				struct ethtool_pauseparam *epauseparm)
 {
-	u32 regval = 0;
 	struct axienet_local *lp = netdev_priv(ndev);
 
-	if (netif_running(ndev)) {
-		netdev_err(ndev,
-			   "Please stop netif before applying configuration\n");
-		return -EFAULT;
-	}
-
-	regval = axienet_ior(lp, XAE_FCC_OFFSET);
-	if (epauseparm->tx_pause)
-		regval |= XAE_FCC_FCTX_MASK;
-	else
-		regval &= ~XAE_FCC_FCTX_MASK;
-	if (epauseparm->rx_pause)
-		regval |= XAE_FCC_FCRX_MASK;
-	else
-		regval &= ~XAE_FCC_FCRX_MASK;
-	axienet_iow(lp, XAE_FCC_OFFSET, regval);
-
-	return 0;
+	return phylink_ethtool_set_pauseparam(lp->phylink, epauseparm);
 }
 
 /**
@@ -1289,17 +1338,170 @@ static int axienet_ethtools_set_coalesce(struct net_device *ndev,
 	return 0;
 }
 
+static int
+axienet_ethtools_get_link_ksettings(struct net_device *ndev,
+				    struct ethtool_link_ksettings *cmd)
+{
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	return phylink_ethtool_ksettings_get(lp->phylink, cmd);
+}
+
+static int
+axienet_ethtools_set_link_ksettings(struct net_device *ndev,
+				    const struct ethtool_link_ksettings *cmd)
+{
+	struct axienet_local *lp = netdev_priv(ndev);
+
+	return phylink_ethtool_ksettings_set(lp->phylink, cmd);
+}
+
 static const struct ethtool_ops axienet_ethtool_ops = {
 	.get_drvinfo    = axienet_ethtools_get_drvinfo,
 	.get_regs_len   = axienet_ethtools_get_regs_len,
 	.get_regs       = axienet_ethtools_get_regs,
 	.get_link       = ethtool_op_get_link,
+	.get_ringparam	= axienet_ethtools_get_ringparam,
+	.set_ringparam	= axienet_ethtools_set_ringparam,
 	.get_pauseparam = axienet_ethtools_get_pauseparam,
 	.set_pauseparam = axienet_ethtools_set_pauseparam,
 	.get_coalesce   = axienet_ethtools_get_coalesce,
 	.set_coalesce   = axienet_ethtools_set_coalesce,
-	.get_link_ksettings = phy_ethtool_get_link_ksettings,
-	.set_link_ksettings = phy_ethtool_set_link_ksettings,
+	.get_link_ksettings = axienet_ethtools_get_link_ksettings,
+	.set_link_ksettings = axienet_ethtools_set_link_ksettings,
+};
+
+static void axienet_validate(struct phylink_config *config,
+			     unsigned long *supported,
+			     struct phylink_link_state *state)
+{
+	struct net_device *ndev = to_net_dev(config->dev);
+	struct axienet_local *lp = netdev_priv(ndev);
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
+
+	/* Only support the mode we are configured for */
+	if (state->interface != PHY_INTERFACE_MODE_NA &&
+	    state->interface != lp->phy_mode) {
+		netdev_warn(ndev, "Cannot use PHY mode %s, supported: %s\n",
+			    phy_modes(state->interface),
+			    phy_modes(lp->phy_mode));
+		bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
+		return;
+	}
+
+	phylink_set(mask, Autoneg);
+	phylink_set_port_modes(mask);
+
+	phylink_set(mask, Asym_Pause);
+	phylink_set(mask, Pause);
+	phylink_set(mask, 1000baseX_Full);
+	phylink_set(mask, 10baseT_Full);
+	phylink_set(mask, 100baseT_Full);
+	phylink_set(mask, 1000baseT_Full);
+
+	bitmap_and(supported, supported, mask,
+		   __ETHTOOL_LINK_MODE_MASK_NBITS);
+	bitmap_and(state->advertising, state->advertising, mask,
+		   __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+static int axienet_mac_link_state(struct phylink_config *config,
+				  struct phylink_link_state *state)
+{
+	struct net_device *ndev = to_net_dev(config->dev);
+	struct axienet_local *lp = netdev_priv(ndev);
+	u32 emmc_reg, fcc_reg;
+
+	state->interface = lp->phy_mode;
+
+	emmc_reg = axienet_ior(lp, XAE_EMMC_OFFSET);
+	if (emmc_reg & XAE_EMMC_LINKSPD_1000)
+		state->speed = SPEED_1000;
+	else if (emmc_reg & XAE_EMMC_LINKSPD_100)
+		state->speed = SPEED_100;
+	else
+		state->speed = SPEED_10;
+
+	state->pause = 0;
+	fcc_reg = axienet_ior(lp, XAE_FCC_OFFSET);
+	if (fcc_reg & XAE_FCC_FCTX_MASK)
+		state->pause |= MLO_PAUSE_TX;
+	if (fcc_reg & XAE_FCC_FCRX_MASK)
+		state->pause |= MLO_PAUSE_RX;
+
+	state->an_complete = 0;
+	state->duplex = 1;
+
+	return 1;
+}
+
+static void axienet_mac_an_restart(struct phylink_config *config)
+{
+	/* Unsupported, do nothing */
+}
+
+static void axienet_mac_config(struct phylink_config *config, unsigned int mode,
+			       const struct phylink_link_state *state)
+{
+	struct net_device *ndev = to_net_dev(config->dev);
+	struct axienet_local *lp = netdev_priv(ndev);
+	u32 emmc_reg, fcc_reg;
+
+	emmc_reg = axienet_ior(lp, XAE_EMMC_OFFSET);
+	emmc_reg &= ~XAE_EMMC_LINKSPEED_MASK;
+
+	switch (state->speed) {
+	case SPEED_1000:
+		emmc_reg |= XAE_EMMC_LINKSPD_1000;
+		break;
+	case SPEED_100:
+		emmc_reg |= XAE_EMMC_LINKSPD_100;
+		break;
+	case SPEED_10:
+		emmc_reg |= XAE_EMMC_LINKSPD_10;
+		break;
+	default:
+		dev_err(&ndev->dev,
+			"Speed other than 10, 100 or 1Gbps is not supported\n");
+		break;
+	}
+
+	axienet_iow(lp, XAE_EMMC_OFFSET, emmc_reg);
+
+	fcc_reg = axienet_ior(lp, XAE_FCC_OFFSET);
+	if (state->pause & MLO_PAUSE_TX)
+		fcc_reg |= XAE_FCC_FCTX_MASK;
+	else
+		fcc_reg &= ~XAE_FCC_FCTX_MASK;
+	if (state->pause & MLO_PAUSE_RX)
+		fcc_reg |= XAE_FCC_FCRX_MASK;
+	else
+		fcc_reg &= ~XAE_FCC_FCRX_MASK;
+	axienet_iow(lp, XAE_FCC_OFFSET, fcc_reg);
+}
+
+static void axienet_mac_link_down(struct phylink_config *config,
+				  unsigned int mode,
+				  phy_interface_t interface)
+{
+	/* nothing meaningful to do */
+}
+
+static void axienet_mac_link_up(struct phylink_config *config,
+				unsigned int mode,
+				phy_interface_t interface,
+				struct phy_device *phy)
+{
+	/* nothing meaningful to do */
+}
+
+static const struct phylink_mac_ops axienet_phylink_ops = {
+	.validate = axienet_validate,
+	.mac_link_state = axienet_mac_link_state,
+	.mac_an_restart = axienet_mac_an_restart,
+	.mac_config = axienet_mac_config,
+	.mac_link_down = axienet_mac_link_down,
+	.mac_link_up = axienet_mac_link_up,
 };
 
 /**
@@ -1313,38 +1515,33 @@ static void axienet_dma_err_handler(unsigned long data)
 {
 	u32 axienet_status;
 	u32 cr, i;
-	int mdio_mcreg;
 	struct axienet_local *lp = (struct axienet_local *) data;
 	struct net_device *ndev = lp->ndev;
 	struct axidma_bd *cur_p;
 
 	axienet_setoptions(ndev, lp->options &
 			   ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN));
-	mdio_mcreg = axienet_ior(lp, XAE_MDIO_MC_OFFSET);
-	axienet_mdio_wait_until_ready(lp);
 	/* Disable the MDIO interface till Axi Ethernet Reset is completed.
 	 * When we do an Axi Ethernet reset, it resets the complete core
-	 * including the MDIO. So if MDIO is not disabled when the reset
-	 * process is started, MDIO will be broken afterwards.
+	 * including the MDIO. MDIO must be disabled before resetting
+	 * and re-enabled afterwards.
+	 * Hold MDIO bus lock to avoid MDIO accesses during the reset.
 	 */
-	axienet_iow(lp, XAE_MDIO_MC_OFFSET, (mdio_mcreg &
-		    ~XAE_MDIO_MC_MDIOEN_MASK));
+	mutex_lock(&lp->mii_bus->mdio_lock);
+	axienet_mdio_disable(lp);
+	__axienet_device_reset(lp);
+	axienet_mdio_enable(lp);
+	mutex_unlock(&lp->mii_bus->mdio_lock);
 
-	__axienet_device_reset(lp, XAXIDMA_TX_CR_OFFSET);
-	__axienet_device_reset(lp, XAXIDMA_RX_CR_OFFSET);
-
-	axienet_iow(lp, XAE_MDIO_MC_OFFSET, mdio_mcreg);
-	axienet_mdio_wait_until_ready(lp);
-
-	for (i = 0; i < TX_BD_NUM; i++) {
+	for (i = 0; i < lp->tx_bd_num; i++) {
 		cur_p = &lp->tx_bd_v[i];
 		if (cur_p->phys)
 			dma_unmap_single(ndev->dev.parent, cur_p->phys,
 					 (cur_p->cntrl &
 					  XAXIDMA_BD_CTRL_LENGTH_MASK),
 					 DMA_TO_DEVICE);
-		if (cur_p->app4)
-			dev_kfree_skb_irq((struct sk_buff *) cur_p->app4);
+		if (cur_p->skb)
+			dev_kfree_skb_irq(cur_p->skb);
 		cur_p->phys = 0;
 		cur_p->cntrl = 0;
 		cur_p->status = 0;
@@ -1353,10 +1550,10 @@ static void axienet_dma_err_handler(unsigned long data)
 		cur_p->app2 = 0;
 		cur_p->app3 = 0;
 		cur_p->app4 = 0;
-		cur_p->sw_id_offset = 0;
+		cur_p->skb = NULL;
 	}
 
-	for (i = 0; i < RX_BD_NUM; i++) {
+	for (i = 0; i < lp->rx_bd_num; i++) {
 		cur_p = &lp->rx_bd_v[i];
 		cur_p->status = 0;
 		cur_p->app0 = 0;
@@ -1404,7 +1601,7 @@ static void axienet_dma_err_handler(unsigned long data)
 	axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET,
 			  cr | XAXIDMA_CR_RUNSTOP_MASK);
 	axienet_dma_out32(lp, XAXIDMA_RX_TDESC_OFFSET, lp->rx_bd_p +
-			  (sizeof(*lp->rx_bd_v) * (RX_BD_NUM - 1)));
+			  (sizeof(*lp->rx_bd_v) * (lp->rx_bd_num - 1)));
 
 	/* Write to the RS (Run-stop) bit in the Tx channel control register.
 	 * Tx channel is now ready to run. But only after we write to the
@@ -1422,6 +1619,8 @@ static void axienet_dma_err_handler(unsigned long data)
 	axienet_status = axienet_ior(lp, XAE_IP_OFFSET);
 	if (axienet_status & XAE_INT_RXRJECT_MASK)
 		axienet_iow(lp, XAE_IS_OFFSET, XAE_INT_RXRJECT_MASK);
+	axienet_iow(lp, XAE_IE_OFFSET, lp->eth_irq > 0 ?
+		    XAE_INT_RECV_ERROR_MASK : 0);
 	axienet_iow(lp, XAE_FCC_OFFSET, XAE_FCC_FCRX_MASK);
 
 	/* Sync default options with HW but leave receiver and
@@ -1453,7 +1652,7 @@ static int axienet_probe(struct platform_device *pdev)
 	struct axienet_local *lp;
 	struct net_device *ndev;
 	const void *mac_addr;
-	struct resource *ethres, dmares;
+	struct resource *ethres;
 	u32 value;
 
 	ndev = alloc_etherdev(sizeof(*lp));
@@ -1476,6 +1675,8 @@ static int axienet_probe(struct platform_device *pdev)
 	lp->ndev = ndev;
 	lp->dev = &pdev->dev;
 	lp->options = XAE_OPTION_DEFAULTS;
+	lp->rx_bd_num = RX_BD_NUM_DEFAULT;
+	lp->tx_bd_num = TX_BD_NUM_DEFAULT;
 	/* Map device registers */
 	ethres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	lp->regs = devm_ioremap_resource(&pdev->dev, ethres);
@@ -1484,6 +1685,7 @@ static int axienet_probe(struct platform_device *pdev)
 		ret = PTR_ERR(lp->regs);
 		goto free_netdev;
 	}
+	lp->regs_start = ethres->start;
 
 	/* Setup checksum offload, but default to off if not specified */
 	lp->features = 0;
@@ -1568,38 +1770,56 @@ static int axienet_probe(struct platform_device *pdev)
 
 	/* Find the DMA node, map the DMA registers, and decode the DMA IRQs */
 	np = of_parse_phandle(pdev->dev.of_node, "axistream-connected", 0);
-	if (!np) {
-		dev_err(&pdev->dev, "could not find DMA node\n");
-		ret = -ENODEV;
-		goto free_netdev;
-	}
-	ret = of_address_to_resource(np, 0, &dmares);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to get DMA resource\n");
+	if (np) {
+		struct resource dmares;
+
+		ret = of_address_to_resource(np, 0, &dmares);
+		if (ret) {
+			dev_err(&pdev->dev,
+				"unable to get DMA resource\n");
+			of_node_put(np);
+			goto free_netdev;
+		}
+		lp->dma_regs = devm_ioremap_resource(&pdev->dev,
+						     &dmares);
+		lp->rx_irq = irq_of_parse_and_map(np, 1);
+		lp->tx_irq = irq_of_parse_and_map(np, 0);
 		of_node_put(np);
-		goto free_netdev;
+		lp->eth_irq = platform_get_irq(pdev, 0);
+	} else {
+		/* Check for these resources directly on the Ethernet node. */
+		struct resource *res = platform_get_resource(pdev,
+							     IORESOURCE_MEM, 1);
+		if (!res) {
+			dev_err(&pdev->dev, "unable to get DMA memory resource\n");
+			goto free_netdev;
+		}
+		lp->dma_regs = devm_ioremap_resource(&pdev->dev, res);
+		lp->rx_irq = platform_get_irq(pdev, 1);
+		lp->tx_irq = platform_get_irq(pdev, 0);
+		lp->eth_irq = platform_get_irq(pdev, 2);
 	}
-	lp->dma_regs = devm_ioremap_resource(&pdev->dev, &dmares);
 	if (IS_ERR(lp->dma_regs)) {
 		dev_err(&pdev->dev, "could not map DMA regs\n");
 		ret = PTR_ERR(lp->dma_regs);
-		of_node_put(np);
 		goto free_netdev;
 	}
-	lp->rx_irq = irq_of_parse_and_map(np, 1);
-	lp->tx_irq = irq_of_parse_and_map(np, 0);
-	of_node_put(np);
 	if ((lp->rx_irq <= 0) || (lp->tx_irq <= 0)) {
 		dev_err(&pdev->dev, "could not determine irqs\n");
 		ret = -ENOMEM;
 		goto free_netdev;
 	}
 
+	/* Check for Ethernet core IRQ (optional) */
+	if (lp->eth_irq <= 0)
+		dev_info(&pdev->dev, "Ethernet core IRQ not defined\n");
+
 	/* Retrieve the MAC address */
 	mac_addr = of_get_mac_address(pdev->dev.of_node);
 	if (IS_ERR(mac_addr)) {
-		dev_err(&pdev->dev, "could not find MAC address\n");
-		goto free_netdev;
+		dev_warn(&pdev->dev, "could not find MAC address property: %ld\n",
+			 PTR_ERR(mac_addr));
+		mac_addr = NULL;
 	}
 	axienet_set_mac_address(ndev, mac_addr);
 
@@ -1608,9 +1828,36 @@ static int axienet_probe(struct platform_device *pdev)
 
 	lp->phy_node = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
 	if (lp->phy_node) {
-		ret = axienet_mdio_setup(lp, pdev->dev.of_node);
+		lp->clk = devm_clk_get(&pdev->dev, NULL);
+		if (IS_ERR(lp->clk)) {
+			dev_warn(&pdev->dev, "Failed to get clock: %ld\n",
+				 PTR_ERR(lp->clk));
+			lp->clk = NULL;
+		} else {
+			ret = clk_prepare_enable(lp->clk);
+			if (ret) {
+				dev_err(&pdev->dev, "Unable to enable clock: %d\n",
+					ret);
+				goto free_netdev;
+			}
+		}
+
+		ret = axienet_mdio_setup(lp);
 		if (ret)
-			dev_warn(&pdev->dev, "error registering MDIO bus\n");
+			dev_warn(&pdev->dev,
+				 "error registering MDIO bus: %d\n", ret);
+	}
+
+	lp->phylink_config.dev = &ndev->dev;
+	lp->phylink_config.type = PHYLINK_NETDEV;
+
+	lp->phylink = phylink_create(&lp->phylink_config, pdev->dev.fwnode,
+				     lp->phy_mode,
+				     &axienet_phylink_ops);
+	if (IS_ERR(lp->phylink)) {
+		ret = PTR_ERR(lp->phylink);
+		dev_err(&pdev->dev, "phylink_create error (%i)\n", ret);
+		goto free_netdev;
 	}
 
 	ret = register_netdev(lp->ndev);
@@ -1632,9 +1879,16 @@ static int axienet_remove(struct platform_device *pdev)
 	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct axienet_local *lp = netdev_priv(ndev);
 
-	axienet_mdio_teardown(lp);
 	unregister_netdev(ndev);
 
+	if (lp->phylink)
+		phylink_destroy(lp->phylink);
+
+	axienet_mdio_teardown(lp);
+
+	if (lp->clk)
+		clk_disable_unprepare(lp->clk);
+
 	of_node_put(lp->phy_node);
 	lp->phy_node = NULL;
 
@@ -1643,9 +1897,23 @@ static int axienet_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static void axienet_shutdown(struct platform_device *pdev)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+
+	rtnl_lock();
+	netif_device_detach(ndev);
+
+	if (netif_running(ndev))
+		dev_close(ndev);
+
+	rtnl_unlock();
+}
+
 static struct platform_driver axienet_driver = {
 	.probe = axienet_probe,
 	.remove = axienet_remove,
+	.shutdown = axienet_shutdown,
 	.driver = {
 		 .name = "xilinx_axienet",
 		 .of_match_table = axienet_of_match,
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
index 704babdbc8a2..435ed308d990 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
@@ -5,9 +5,11 @@
  * Copyright (c) 2009 Secret Lab Technologies, Ltd.
  * Copyright (c) 2010 - 2011 Michal Simek <monstr@monstr.eu>
  * Copyright (c) 2010 - 2011 PetaLogix
+ * Copyright (c) 2019 SED Systems, a division of Calian Ltd.
  * Copyright (c) 2010 - 2012 Xilinx, Inc. All rights reserved.
  */
 
+#include <linux/clk.h>
 #include <linux/of_address.h>
 #include <linux/of_mdio.h>
 #include <linux/jiffies.h>
@@ -16,10 +18,10 @@
 #include "xilinx_axienet.h"
 
 #define MAX_MDIO_FREQ		2500000 /* 2.5 MHz */
-#define DEFAULT_CLOCK_DIVISOR	XAE_MDIO_DIV_DFT
+#define DEFAULT_HOST_CLOCK	150000000 /* 150 MHz */
 
 /* Wait till MDIO interface is ready to accept a new transaction.*/
-int axienet_mdio_wait_until_ready(struct axienet_local *lp)
+static int axienet_mdio_wait_until_ready(struct axienet_local *lp)
 {
 	u32 val;
 
@@ -112,23 +114,42 @@ static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg,
 }
 
 /**
- * axienet_mdio_setup - MDIO setup function
+ * axienet_mdio_enable - MDIO hardware setup function
  * @lp:		Pointer to axienet local data structure.
- * @np:		Pointer to device node
  *
- * Return:	0 on success, -ETIMEDOUT on a timeout, -ENOMEM when
- *		mdiobus_alloc (to allocate memory for mii bus structure) fails.
+ * Return:	0 on success, -ETIMEDOUT on a timeout.
  *
  * Sets up the MDIO interface by initializing the MDIO clock and enabling the
- * MDIO interface in hardware. Register the MDIO interface.
+ * MDIO interface in hardware.
  **/
-int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np)
+int axienet_mdio_enable(struct axienet_local *lp)
 {
-	int ret;
 	u32 clk_div, host_clock;
-	struct mii_bus *bus;
-	struct resource res;
-	struct device_node *np1;
+
+	if (lp->clk) {
+		host_clock = clk_get_rate(lp->clk);
+	} else {
+		struct device_node *np1;
+
+		/* Legacy fallback: detect CPU clock frequency and use as AXI
+		 * bus clock frequency. This only works on certain platforms.
+		 */
+		np1 = of_find_node_by_name(NULL, "cpu");
+		if (!np1) {
+			netdev_warn(lp->ndev, "Could not find CPU device node.\n");
+			host_clock = DEFAULT_HOST_CLOCK;
+		} else {
+			int ret = of_property_read_u32(np1, "clock-frequency",
+						       &host_clock);
+			if (ret) {
+				netdev_warn(lp->ndev, "CPU clock-frequency property not found.\n");
+				host_clock = DEFAULT_HOST_CLOCK;
+			}
+			of_node_put(np1);
+		}
+		netdev_info(lp->ndev, "Setting assumed host clock to %u\n",
+			    host_clock);
+	}
 
 	/* clk_div can be calculated by deriving it from the equation:
 	 * fMDIO = fHOST / ((1 + clk_div) * 2)
@@ -155,25 +176,6 @@ int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np)
 	 * "clock-frequency" from the CPU
 	 */
 
-	np1 = of_find_node_by_name(NULL, "cpu");
-	if (!np1) {
-		netdev_warn(lp->ndev, "Could not find CPU device node.\n");
-		netdev_warn(lp->ndev,
-			    "Setting MDIO clock divisor to default %d\n",
-			    DEFAULT_CLOCK_DIVISOR);
-		clk_div = DEFAULT_CLOCK_DIVISOR;
-		goto issue;
-	}
-	if (of_property_read_u32(np1, "clock-frequency", &host_clock)) {
-		netdev_warn(lp->ndev, "clock-frequency property not found.\n");
-		netdev_warn(lp->ndev,
-			    "Setting MDIO clock divisor to default %d\n",
-			    DEFAULT_CLOCK_DIVISOR);
-		clk_div = DEFAULT_CLOCK_DIVISOR;
-		of_node_put(np1);
-		goto issue;
-	}
-
 	clk_div = (host_clock / (MAX_MDIO_FREQ * 2)) - 1;
 	/* If there is any remainder from the division of
 	 * fHOST / (MAX_MDIO_FREQ * 2), then we need to add
@@ -186,12 +188,39 @@ int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np)
 		   "Setting MDIO clock divisor to %u/%u Hz host clock.\n",
 		   clk_div, host_clock);
 
-	of_node_put(np1);
-issue:
-	axienet_iow(lp, XAE_MDIO_MC_OFFSET,
-		    (((u32) clk_div) | XAE_MDIO_MC_MDIOEN_MASK));
+	axienet_iow(lp, XAE_MDIO_MC_OFFSET, clk_div | XAE_MDIO_MC_MDIOEN_MASK);
 
-	ret = axienet_mdio_wait_until_ready(lp);
+	return axienet_mdio_wait_until_ready(lp);
+}
+
+/**
+ * axienet_mdio_disable - MDIO hardware disable function
+ * @lp:		Pointer to axienet local data structure.
+ *
+ * Disable the MDIO interface in hardware.
+ **/
+void axienet_mdio_disable(struct axienet_local *lp)
+{
+	axienet_iow(lp, XAE_MDIO_MC_OFFSET, 0);
+}
+
+/**
+ * axienet_mdio_setup - MDIO setup function
+ * @lp:		Pointer to axienet local data structure.
+ *
+ * Return:	0 on success, -ETIMEDOUT on a timeout, -ENOMEM when
+ *		mdiobus_alloc (to allocate memory for mii bus structure) fails.
+ *
+ * Sets up the MDIO interface by initializing the MDIO clock and enabling the
+ * MDIO interface in hardware. Register the MDIO interface.
+ **/
+int axienet_mdio_setup(struct axienet_local *lp)
+{
+	struct device_node *mdio_node;
+	struct mii_bus *bus;
+	int ret;
+
+	ret = axienet_mdio_enable(lp);
 	if (ret < 0)
 		return ret;
 
@@ -199,10 +228,8 @@ issue:
 	if (!bus)
 		return -ENOMEM;
 
-	np1 = of_get_parent(lp->phy_node);
-	of_address_to_resource(np1, 0, &res);
-	snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx",
-		 (unsigned long long) res.start);
+	snprintf(bus->id, MII_BUS_ID_SIZE, "axienet-%.8llx",
+		 (unsigned long long)lp->regs_start);
 
 	bus->priv = lp;
 	bus->name = "Xilinx Axi Ethernet MDIO";
@@ -211,7 +238,9 @@ issue:
 	bus->parent = lp->dev;
 	lp->mii_bus = bus;
 
-	ret = of_mdiobus_register(bus, np1);
+	mdio_node = of_get_child_by_name(lp->dev->of_node, "mdio");
+	ret = of_mdiobus_register(bus, mdio_node);
+	of_node_put(mdio_node);
 	if (ret) {
 		mdiobus_free(bus);
 		lp->mii_bus = NULL;