summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-02-18 15:52:43 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2014-02-18 15:52:43 -0800
commitb0d3f6d47e87e8ac8a47e0c7652ab536019477db (patch)
treee777fad9a4cb0f27f31b0137b855f60dab9c3010 /drivers/net/ethernet
parent91c6c8dcc7c30ed2d5861c670621a23f3b37e293 (diff)
parent22f08ad9721d4d1a92061b60026144627a60d644 (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller: 1) kvaser CAN driver has fixed limits of some of it's table, validate that we won't exceed those limits at probe time. Fix from Olivier Sobrie. 2) Fix rtl8192ce disabling interrupts for too long, from Olivier Langlois. 3) Fix botched shift in ath5k driver, from Dan Carpenter. 4) Fix corruption of deferred packets in TIPC, from Erik Hugne. 5) Fix newlink error path in macvlan driver, from Cong Wang. 6) Fix netpoll deadlock in bonding, from Ding Tianhong. 7) Handle GSO packets properly in forwarding path when fragmentation is necessary on egress, from Florian Westphal. 8) Fix axienet build errors, from Michal Simek. 9) Fix refcounting of ubufs on tx in vhost net driver, from Michael S Tsirkin. 10) Carrier status isn't set properly in hyperv driver, from Haiyang Zhang. 11) Missing pci_disable_device() in tulip_remove_one), from Ingo Molnar. 12) AF_PACKET qdisc bypass mode doesn't adhere to driver provided TX queue selection method. Add a fallback method mechanism to fix this bug, from Daniel Borkmann. 13) Fix regression in link local route handling on GRE tunnels, from Nicolas Dichtel. 14) Bonding can assign dup aggregator IDs in some sequences of configuration, fix by making the allocation counter per-bond instead of global. From Jiri Bohac. 15) sctp_connectx() needs compat translations, from Daniel Borkmann. 16) Fix of_mdio PHY interrupt parsing, from Ben Dooks * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits) MAINTAINERS: add entry for the PHY library of_mdio: fix phy interrupt passing net: ethernet: update dependency and help text of mvneta NET: fec: only enable napi if we are successful af_packet: remove a stray tab in packet_set_ring() net: sctp: fix sctp_connectx abi for ia32 emulation/compat mode ipv4: fix counter in_slow_tot irtty-sir.c: Do not set_termios() on irtty_close() bonding: 802.3ad: make aggregator_identifier bond-private usbnet: remove generic hard_header_len check gre: add link local route when local addr is any batman-adv: fix potential kernel paging error for unicast transmissions batman-adv: avoid double free when orig_node initialization fails batman-adv: free skb on TVLV parsing success batman-adv: fix TT CRC computation by ensuring byte order batman-adv: fix potential orig_node reference leak batman-adv: avoid potential race condition when adding a new neighbour batman-adv: properly check pskb_may_pull return value batman-adv: release vlan object after checking the CRC batman-adv: fix TT-TVLV parsing on OGM reception ...
Diffstat (limited to 'drivers/net/ethernet')
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c4
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h2
-rw-r--r--drivers/net/ethernet/dec/tulip/tulip_core.c1
-rw-r--r--drivers/net/ethernet/freescale/fec_main.c4
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_main.c6
-rw-r--r--drivers/net/ethernet/lantiq_etop.c2
-rw-r--r--drivers/net/ethernet/marvell/Kconfig6
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_tx.c4
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/mlx4_en.h2
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/Kconfig11
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/Makefile1
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c330
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac.h3
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c5
-rw-r--r--drivers/net/ethernet/ti/cpsw.c11
-rw-r--r--drivers/net/ethernet/tile/tilegx.c2
-rw-r--r--drivers/net/ethernet/xilinx/xilinx_axienet_main.c13
17 files changed, 384 insertions, 23 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 9d7419e0390b..66c0df78c3ff 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -1873,7 +1873,7 @@ void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw)
}
u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb,
- void *accel_priv)
+ void *accel_priv, select_queue_fallback_t fallback)
{
struct bnx2x *bp = netdev_priv(dev);
@@ -1895,7 +1895,7 @@ u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb,
}
/* select a non-FCoE queue */
- return __netdev_pick_tx(dev, skb) % BNX2X_NUM_ETH_QUEUES(bp);
+ return fallback(dev, skb) % BNX2X_NUM_ETH_QUEUES(bp);
}
void bnx2x_set_num_queues(struct bnx2x *bp)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
index bfc58d488bb5..a89a40f88c25 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -496,7 +496,7 @@ int bnx2x_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos);
/* select_queue callback */
u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb,
- void *accel_priv);
+ void *accel_priv, select_queue_fallback_t fallback);
static inline void bnx2x_update_rx_prod(struct bnx2x *bp,
struct bnx2x_fastpath *fp,
diff --git a/drivers/net/ethernet/dec/tulip/tulip_core.c b/drivers/net/ethernet/dec/tulip/tulip_core.c
index add05f14b38b..1642de78aac8 100644
--- a/drivers/net/ethernet/dec/tulip/tulip_core.c
+++ b/drivers/net/ethernet/dec/tulip/tulip_core.c
@@ -1939,6 +1939,7 @@ static void tulip_remove_one(struct pci_dev *pdev)
pci_iounmap(pdev, tp->base_addr);
free_netdev (dev);
pci_release_regions (pdev);
+ pci_disable_device(pdev);
/* pci_power_off (pdev, -1); */
}
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index d4782b42401b..903362a7b584 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1778,8 +1778,6 @@ fec_enet_open(struct net_device *ndev)
struct fec_enet_private *fep = netdev_priv(ndev);
int ret;
- napi_enable(&fep->napi);
-
/* I should reset the ring buffers here, but I don't yet know
* a simple way to do that.
*/
@@ -1794,6 +1792,8 @@ fec_enet_open(struct net_device *ndev)
fec_enet_free_buffers(ndev);
return ret;
}
+
+ napi_enable(&fep->napi);
phy_start(fep->phy_dev);
netif_start_queue(ndev);
fep->opened = 1;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 6d4ada72dfd0..18076c4178b4 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -6881,7 +6881,7 @@ static inline int ixgbe_maybe_stop_tx(struct ixgbe_ring *tx_ring, u16 size)
}
static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb,
- void *accel_priv)
+ void *accel_priv, select_queue_fallback_t fallback)
{
struct ixgbe_fwd_adapter *fwd_adapter = accel_priv;
#ifdef IXGBE_FCOE
@@ -6907,7 +6907,7 @@ static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb,
if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
break;
default:
- return __netdev_pick_tx(dev, skb);
+ return fallback(dev, skb);
}
f = &adapter->ring_feature[RING_F_FCOE];
@@ -6920,7 +6920,7 @@ static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb,
return txq + f->offset;
#else
- return __netdev_pick_tx(dev, skb);
+ return fallback(dev, skb);
#endif
}
diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
index 8f9266c64c75..fd4b6aecf6ee 100644
--- a/drivers/net/ethernet/lantiq_etop.c
+++ b/drivers/net/ethernet/lantiq_etop.c
@@ -619,7 +619,7 @@ ltq_etop_set_multicast_list(struct net_device *dev)
static u16
ltq_etop_select_queue(struct net_device *dev, struct sk_buff *skb,
- void *accel_priv)
+ void *accel_priv, select_queue_fallback_t fallback)
{
/* we are currently only using the first queue */
return 0;
diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig
index 6300fd27f2db..68e6a6613e9a 100644
--- a/drivers/net/ethernet/marvell/Kconfig
+++ b/drivers/net/ethernet/marvell/Kconfig
@@ -43,12 +43,12 @@ config MVMDIO
This driver is used by the MV643XX_ETH and MVNETA drivers.
config MVNETA
- tristate "Marvell Armada 370/XP network interface support"
- depends on MACH_ARMADA_370_XP
+ tristate "Marvell Armada 370/38x/XP network interface support"
+ depends on PLAT_ORION
select MVMDIO
---help---
This driver supports the network interface units in the
- Marvell ARMADA XP and ARMADA 370 SoC family.
+ Marvell ARMADA XP, ARMADA 370 and ARMADA 38x SoC family.
Note that this driver is distinct from the mv643xx_eth
driver, which should be used for the older Marvell SoCs
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
index 8e8a7eb43a2c..13457032d15f 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
@@ -629,7 +629,7 @@ static void build_inline_wqe(struct mlx4_en_tx_desc *tx_desc, struct sk_buff *sk
}
u16 mlx4_en_select_queue(struct net_device *dev, struct sk_buff *skb,
- void *accel_priv)
+ void *accel_priv, select_queue_fallback_t fallback)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
u16 rings_p_up = priv->num_tx_rings_p_up;
@@ -641,7 +641,7 @@ u16 mlx4_en_select_queue(struct net_device *dev, struct sk_buff *skb,
if (vlan_tx_tag_present(skb))
up = vlan_tx_tag_get(skb) >> VLAN_PRIO_SHIFT;
- return __netdev_pick_tx(dev, skb) % rings_p_up + up * rings_p_up;
+ return fallback(dev, skb) % rings_p_up + up * rings_p_up;
}
static void mlx4_bf_copy(void __iomem *dst, unsigned long *src, unsigned bytecnt)
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index 3af04c3f42ea..9ca223bc90fc 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -723,7 +723,7 @@ int mlx4_en_arm_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq);
void mlx4_en_tx_irq(struct mlx4_cq *mcq);
u16 mlx4_en_select_queue(struct net_device *dev, struct sk_buff *skb,
- void *accel_priv);
+ void *accel_priv, select_queue_fallback_t fallback);
netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev);
int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv,
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index e2f202e3932f..f2d7c702c77f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -37,6 +37,17 @@ config DWMAC_SUNXI
stmmac device driver. This driver is used for A20/A31
GMAC ethernet controller.
+config DWMAC_STI
+ bool "STi GMAC support"
+ depends on STMMAC_PLATFORM && ARCH_STI
+ default y
+ ---help---
+ Support for ethernet controller on STi SOCs.
+
+ This selects STi SoC glue layer support for the stmmac
+ device driver. This driver is used on for the STi series
+ SOCs GMAC ethernet controller.
+
config STMMAC_PCI
bool "STMMAC PCI bus support"
depends on STMMAC_ETH && PCI
diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index ecadecea79b2..dcef28775dad 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -2,6 +2,7 @@ obj-$(CONFIG_STMMAC_ETH) += stmmac.o
stmmac-$(CONFIG_STMMAC_PLATFORM) += stmmac_platform.o
stmmac-$(CONFIG_STMMAC_PCI) += stmmac_pci.o
stmmac-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o
+stmmac-$(CONFIG_DWMAC_STI) += dwmac-sti.o
stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o ring_mode.o \
chain_mode.o dwmac_lib.o dwmac1000_core.o dwmac1000_dma.o \
dwmac100_core.o dwmac100_dma.o enh_desc.o norm_desc.o \
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
new file mode 100644
index 000000000000..552bbc17863c
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
@@ -0,0 +1,330 @@
+/**
+ * dwmac-sti.c - STMicroelectronics DWMAC Specific Glue layer
+ *
+ * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/stmmac.h>
+#include <linux/phy.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_net.h>
+
+/**
+ * STi GMAC glue logic.
+ * --------------------
+ *
+ * _
+ * | \
+ * --------|0 \ ETH_SEL_INTERNAL_NOTEXT_PHYCLK
+ * phyclk | |___________________________________________
+ * | | | (phyclk-in)
+ * --------|1 / |
+ * int-clk |_ / |
+ * | _
+ * | | \
+ * |_______|1 \ ETH_SEL_TX_RETIME_CLK
+ * | |___________________________
+ * | | (tx-retime-clk)
+ * _______|0 /
+ * | |_ /
+ * _ |
+ * | \ |
+ * --------|0 \ |
+ * clk_125 | |__|
+ * | | ETH_SEL_TXCLK_NOT_CLK125
+ * --------|1 /
+ * txclk |_ /
+ *
+ *
+ * ETH_SEL_INTERNAL_NOTEXT_PHYCLK is valid only for RMII where PHY can
+ * generate 50MHz clock or MAC can generate it.
+ * This bit is configured by "st,ext-phyclk" property.
+ *
+ * ETH_SEL_TXCLK_NOT_CLK125 is only valid for gigabit modes, where the 125Mhz
+ * clock either comes from clk-125 pin or txclk pin. This configuration is
+ * totally driven by the board wiring. This bit is configured by
+ * "st,tx-retime-src" property.
+ *
+ * TXCLK configuration is different for different phy interface modes
+ * and changes according to link speed in modes like RGMII.
+ *
+ * Below table summarizes the clock requirement and clock sources for
+ * supported phy interface modes with link speeds.
+ * ________________________________________________
+ *| PHY_MODE | 1000 Mbit Link | 100 Mbit Link |
+ * ------------------------------------------------
+ *| MII | n/a | 25Mhz |
+ *| | | txclk |
+ * ------------------------------------------------
+ *| GMII | 125Mhz | 25Mhz |
+ *| | clk-125/txclk | txclk |
+ * ------------------------------------------------
+ *| RGMII | 125Mhz | 25Mhz |
+ *| | clk-125/txclk | clkgen |
+ * ------------------------------------------------
+ *| RMII | n/a | 25Mhz |
+ *| | |clkgen/phyclk-in |
+ * ------------------------------------------------
+ *
+ * TX lines are always retimed with a clk, which can vary depending
+ * on the board configuration. Below is the table of these bits
+ * in eth configuration register depending on source of retime clk.
+ *
+ *---------------------------------------------------------------
+ * src | tx_rt_clk | int_not_ext_phyclk | txclk_n_clk125|
+ *---------------------------------------------------------------
+ * txclk | 0 | n/a | 1 |
+ *---------------------------------------------------------------
+ * ck_125| 0 | n/a | 0 |
+ *---------------------------------------------------------------
+ * phyclk| 1 | 0 | n/a |
+ *---------------------------------------------------------------
+ * clkgen| 1 | 1 | n/a |
+ *---------------------------------------------------------------
+ */
+
+ /* Register definition */
+
+ /* 3 bits [8:6]
+ * [6:6] ETH_SEL_TXCLK_NOT_CLK125
+ * [7:7] ETH_SEL_INTERNAL_NOTEXT_PHYCLK
+ * [8:8] ETH_SEL_TX_RETIME_CLK
+ *
+ */
+
+#define TX_RETIME_SRC_MASK GENMASK(8, 6)
+#define ETH_SEL_TX_RETIME_CLK BIT(8)
+#define ETH_SEL_INTERNAL_NOTEXT_PHYCLK BIT(7)
+#define ETH_SEL_TXCLK_NOT_CLK125 BIT(6)
+
+#define ENMII_MASK GENMASK(5, 5)
+#define ENMII BIT(5)
+
+/**
+ * 3 bits [4:2]
+ * 000-GMII/MII
+ * 001-RGMII
+ * 010-SGMII
+ * 100-RMII
+*/
+#define MII_PHY_SEL_MASK GENMASK(4, 2)
+#define ETH_PHY_SEL_RMII BIT(4)
+#define ETH_PHY_SEL_SGMII BIT(3)
+#define ETH_PHY_SEL_RGMII BIT(2)
+#define ETH_PHY_SEL_GMII 0x0
+#define ETH_PHY_SEL_MII 0x0
+
+#define IS_PHY_IF_MODE_RGMII(iface) (iface == PHY_INTERFACE_MODE_RGMII || \
+ iface == PHY_INTERFACE_MODE_RGMII_ID || \
+ iface == PHY_INTERFACE_MODE_RGMII_RXID || \
+ iface == PHY_INTERFACE_MODE_RGMII_TXID)
+
+#define IS_PHY_IF_MODE_GBIT(iface) (IS_PHY_IF_MODE_RGMII(iface) || \
+ iface == PHY_INTERFACE_MODE_GMII)
+
+struct sti_dwmac {
+ int interface;
+ bool ext_phyclk;
+ bool is_tx_retime_src_clk_125;
+ struct clk *clk;
+ int reg;
+ struct device *dev;
+ struct regmap *regmap;
+};
+
+static u32 phy_intf_sels[] = {
+ [PHY_INTERFACE_MODE_MII] = ETH_PHY_SEL_MII,
+ [PHY_INTERFACE_MODE_GMII] = ETH_PHY_SEL_GMII,
+ [PHY_INTERFACE_MODE_RGMII] = ETH_PHY_SEL_RGMII,
+ [PHY_INTERFACE_MODE_RGMII_ID] = ETH_PHY_SEL_RGMII,
+ [PHY_INTERFACE_MODE_SGMII] = ETH_PHY_SEL_SGMII,
+ [PHY_INTERFACE_MODE_RMII] = ETH_PHY_SEL_RMII,
+};
+
+enum {
+ TX_RETIME_SRC_NA = 0,
+ TX_RETIME_SRC_TXCLK = 1,
+ TX_RETIME_SRC_CLK_125,
+ TX_RETIME_SRC_PHYCLK,
+ TX_RETIME_SRC_CLKGEN,
+};
+
+static const char *const tx_retime_srcs[] = {
+ [TX_RETIME_SRC_NA] = "",
+ [TX_RETIME_SRC_TXCLK] = "txclk",
+ [TX_RETIME_SRC_CLK_125] = "clk_125",
+ [TX_RETIME_SRC_PHYCLK] = "phyclk",
+ [TX_RETIME_SRC_CLKGEN] = "clkgen",
+};
+
+static u32 tx_retime_val[] = {
+ [TX_RETIME_SRC_TXCLK] = ETH_SEL_TXCLK_NOT_CLK125,
+ [TX_RETIME_SRC_CLK_125] = 0x0,
+ [TX_RETIME_SRC_PHYCLK] = ETH_SEL_TX_RETIME_CLK,
+ [TX_RETIME_SRC_CLKGEN] = ETH_SEL_TX_RETIME_CLK |
+ ETH_SEL_INTERNAL_NOTEXT_PHYCLK,
+};
+
+static void setup_retime_src(struct sti_dwmac *dwmac, u32 spd)
+{
+ u32 src = 0, freq = 0;
+
+ if (spd == SPEED_100) {
+ if (dwmac->interface == PHY_INTERFACE_MODE_MII ||
+ dwmac->interface == PHY_INTERFACE_MODE_GMII) {
+ src = TX_RETIME_SRC_TXCLK;
+ } else if (dwmac->interface == PHY_INTERFACE_MODE_RMII) {
+ if (dwmac->ext_phyclk) {
+ src = TX_RETIME_SRC_PHYCLK;
+ } else {
+ src = TX_RETIME_SRC_CLKGEN;
+ freq = 50000000;
+ }
+
+ } else if (IS_PHY_IF_MODE_RGMII(dwmac->interface)) {
+ src = TX_RETIME_SRC_CLKGEN;
+ freq = 25000000;
+ }
+
+ if (src == TX_RETIME_SRC_CLKGEN && dwmac->clk)
+ clk_set_rate(dwmac->clk, freq);
+
+ } else if (spd == SPEED_1000) {
+ if (dwmac->is_tx_retime_src_clk_125)
+ src = TX_RETIME_SRC_CLK_125;
+ else
+ src = TX_RETIME_SRC_TXCLK;
+ }
+
+ regmap_update_bits(dwmac->regmap, dwmac->reg,
+ TX_RETIME_SRC_MASK, tx_retime_val[src]);
+}
+
+static void sti_dwmac_exit(struct platform_device *pdev, void *priv)
+{
+ struct sti_dwmac *dwmac = priv;
+
+ if (dwmac->clk)
+ clk_disable_unprepare(dwmac->clk);
+}
+
+static void sti_fix_mac_speed(void *priv, unsigned int spd)
+{
+ struct sti_dwmac *dwmac = priv;
+
+ setup_retime_src(dwmac, spd);
+
+ return;
+}
+
+static int sti_dwmac_parse_data(struct sti_dwmac *dwmac,
+ struct platform_device *pdev)
+{
+ struct resource *res;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct regmap *regmap;
+ int err;
+
+ if (!np)
+ return -EINVAL;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sti-ethconf");
+ if (!res)
+ return -ENODATA;
+
+ regmap = syscon_regmap_lookup_by_phandle(np, "st,syscon");
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ dwmac->dev = dev;
+ dwmac->interface = of_get_phy_mode(np);
+ dwmac->regmap = regmap;
+ dwmac->reg = res->start;
+ dwmac->ext_phyclk = of_property_read_bool(np, "st,ext-phyclk");
+ dwmac->is_tx_retime_src_clk_125 = false;
+
+ if (IS_PHY_IF_MODE_GBIT(dwmac->interface)) {
+ const char *rs;
+
+ err = of_property_read_string(np, "st,tx-retime-src", &rs);
+ if (err < 0) {
+ dev_err(dev, "st,tx-retime-src not specified\n");
+ return err;
+ }
+
+ if (!strcasecmp(rs, "clk_125"))
+ dwmac->is_tx_retime_src_clk_125 = true;
+ }
+
+ dwmac->clk = devm_clk_get(dev, "sti-ethclk");
+
+ if (IS_ERR(dwmac->clk))
+ dwmac->clk = NULL;
+
+ return 0;
+}
+
+static int sti_dwmac_init(struct platform_device *pdev, void *priv)
+{
+ struct sti_dwmac *dwmac = priv;
+ struct regmap *regmap = dwmac->regmap;
+ int iface = dwmac->interface;
+ u32 reg = dwmac->reg;
+ u32 val, spd;
+
+ if (dwmac->clk)
+ clk_prepare_enable(dwmac->clk);
+
+ regmap_update_bits(regmap, reg, MII_PHY_SEL_MASK, phy_intf_sels[iface]);
+
+ val = (iface == PHY_INTERFACE_MODE_REVMII) ? 0 : ENMII;
+ regmap_update_bits(regmap, reg, ENMII_MASK, val);
+
+ if (IS_PHY_IF_MODE_GBIT(iface))
+ spd = SPEED_1000;
+ else
+ spd = SPEED_100;
+
+ setup_retime_src(dwmac, spd);
+
+ return 0;
+}
+
+static void *sti_dwmac_setup(struct platform_device *pdev)
+{
+ struct sti_dwmac *dwmac;
+ int ret;
+
+ dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
+ if (!dwmac)
+ return ERR_PTR(-ENOMEM);
+
+ ret = sti_dwmac_parse_data(dwmac, pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Unable to parse OF data\n");
+ return ERR_PTR(ret);
+ }
+
+ return dwmac;
+}
+
+const struct stmmac_of_data sti_gmac_data = {
+ .fix_mac_speed = sti_fix_mac_speed,
+ .setup = sti_dwmac_setup,
+ .init = sti_dwmac_init,
+ .exit = sti_dwmac_exit,
+};
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index d9af26ed58ee..f9e60d7918c4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -133,6 +133,9 @@ bool stmmac_eee_init(struct stmmac_priv *priv);
#ifdef CONFIG_DWMAC_SUNXI
extern const struct stmmac_of_data sun7i_gmac_data;
#endif
+#ifdef CONFIG_DWMAC_STI
+extern const struct stmmac_of_data sti_gmac_data;
+#endif
extern struct platform_driver stmmac_pltfr_driver;
static inline int stmmac_register_platform(void)
{
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 5884a7d2063b..c61bc72b8e90 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -33,6 +33,11 @@ static const struct of_device_id stmmac_dt_ids[] = {
#ifdef CONFIG_DWMAC_SUNXI
{ .compatible = "allwinner,sun7i-a20-gmac", .data = &sun7i_gmac_data},
#endif
+#ifdef CONFIG_DWMAC_STI
+ { .compatible = "st,stih415-dwmac", .data = &sti_gmac_data},
+ { .compatible = "st,stih416-dwmac", .data = &sti_gmac_data},
+ { .compatible = "st,stih127-dwmac", .data = &sti_gmac_data},
+#endif
/* SoC specific glue layers should come before generic bindings */
{ .compatible = "st,spear600-gmac"},
{ .compatible = "snps,dwmac-3.610"},
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 1d860ce914ed..651087b5c8da 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -554,7 +554,7 @@ static void cpsw_set_promiscious(struct net_device *ndev, bool enable)
* common for both the interface as the interface shares
* the same hardware resource.
*/
- for (i = 0; i <= priv->data.slaves; i++)
+ for (i = 0; i < priv->data.slaves; i++)
if (priv->slaves[i].ndev->flags & IFF_PROMISC)
flag = true;
@@ -578,7 +578,7 @@ static void cpsw_set_promiscious(struct net_device *ndev, bool enable)
unsigned long timeout = jiffies + HZ;
/* Disable Learn for all ports */
- for (i = 0; i <= priv->data.slaves; i++) {
+ for (i = 0; i < priv->data.slaves; i++) {
cpsw_ale_control_set(ale, i,
ALE_PORT_NOLEARN, 1);
cpsw_ale_control_set(ale, i,
@@ -606,7 +606,7 @@ static void cpsw_set_promiscious(struct net_device *ndev, bool enable)
cpsw_ale_control_set(ale, 0, ALE_P0_UNI_FLOOD, 0);
/* Enable Learn for all ports */
- for (i = 0; i <= priv->data.slaves; i++) {
+ for (i = 0; i < priv->data.slaves; i++) {
cpsw_ale_control_set(ale, i,
ALE_PORT_NOLEARN, 0);
cpsw_ale_control_set(ale, i,
@@ -1896,6 +1896,11 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
memcpy(slave_data->mac_addr, mac_addr, ETH_ALEN);
slave_data->phy_if = of_get_phy_mode(slave_node);
+ if (slave_data->phy_if < 0) {
+ pr_err("Missing or malformed slave[%d] phy-mode property\n",
+ i);
+ return slave_data->phy_if;
+ }
if (data->dual_emac) {
if (of_property_read_u32(slave_node, "dual_emac_res_vlan",
diff --git a/drivers/net/ethernet/tile/tilegx.c b/drivers/net/ethernet/tile/tilegx.c
index 023237a65720..17503da9f7a5 100644
--- a/drivers/net/ethernet/tile/tilegx.c
+++ b/drivers/net/ethernet/tile/tilegx.c
@@ -2071,7 +2071,7 @@ static int tile_net_tx(struct sk_buff *skb, struct net_device *dev)
/* Return subqueue id on this core (one per core). */
static u16 tile_net_select_queue(struct net_device *dev, struct sk_buff *skb,
- void *accel_priv)
+ void *accel_priv, select_queue_fallback_t fallback)
{
return smp_processor_id();
}
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 1ec65feebb9e..4bfdf8c7ada0 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -26,6 +26,7 @@
#include <linux/netdevice.h>
#include <linux/of_mdio.h>
#include <linux/of_platform.h>
+#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/skbuff.h>
#include <linux/spinlock.h>
@@ -600,7 +601,8 @@ static void axienet_start_xmit_done(struct net_device *ndev)
size += status & XAXIDMA_BD_STS_ACTUAL_LEN_MASK;
packets++;
- lp->tx_bd_ci = ++lp->tx_bd_ci % TX_BD_NUM;
+ ++lp->tx_bd_ci;
+ lp->tx_bd_ci %= TX_BD_NUM;
cur_p = &lp->tx_bd_v[lp->tx_bd_ci];
status = cur_p->status;
}
@@ -686,7 +688,8 @@ static int axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
skb_headlen(skb), DMA_TO_DEVICE);
for (ii = 0; ii < num_frag; ii++) {
- lp->tx_bd_tail = ++lp->tx_bd_tail % TX_BD_NUM;
+ ++lp->tx_bd_tail;
+ lp->tx_bd_tail %= TX_BD_NUM;
cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
frag = &skb_shinfo(skb)->frags[ii];
cur_p->phys = dma_map_single(ndev->dev.parent,
@@ -702,7 +705,8 @@ static int axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
tail_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail;
/* Start the transfer */
axienet_dma_out32(lp, XAXIDMA_TX_TDESC_OFFSET, tail_p);
- lp->tx_bd_tail = ++lp->tx_bd_tail % TX_BD_NUM;
+ ++lp->tx_bd_tail;
+ lp->tx_bd_tail %= TX_BD_NUM;
return NETDEV_TX_OK;
}
@@ -774,7 +778,8 @@ static void axienet_recv(struct net_device *ndev)
cur_p->status = 0;
cur_p->sw_id_offset = (u32) new_skb;
- lp->rx_bd_ci = ++lp->rx_bd_ci % RX_BD_NUM;
+ ++lp->rx_bd_ci;
+ lp->rx_bd_ci %= RX_BD_NUM;
cur_p = &lp->rx_bd_v[lp->rx_bd_ci];
}